ZH
RU
ES

How to use the density cup

How to use the density cup, Total:499 items.

In the international standard classification, How to use the density cup involves: Measurement of volume, mass, density, viscosity, Paints and varnishes, Organic chemicals, Plastics, Test conditions and procedures in general, Soil quality. Pedology, Earthworks. Excavations. Foundation construction. Underground works, Products of the chemical industry, Waxes, bituminous materials and other petroleum products, Petroleum products in general, Protection against fire, Construction materials, Coals, Packaging materials and accessories, Road engineering, Fuels, Crude petroleum, Lubricants, industrial oils and related products, Analytical chemistry, Quality, Glass, Inorganic chemicals, Pulps, Air quality, Road vehicle systems, Protection against dangerous goods, Powder metallurgy, Raw materials for rubber and plastics, Refractories, Metalliferous minerals, Cutting tools, Medical equipment, Insulating materials, Electrical wires and cables, Linear and angular measurements, Rubber and plastics products, Aerospace fluid systems and components, Products of the textile industry, Clothes, Paint ingredients, Non-destructive testing, Protection of and in buildings, Reinforced plastics, Radiation measurements, Geology. Meteorology. Hydrology, Rubber, Acoustics and acoustic measurements, Shipbuilding and marine structures in general, Road vehicles in general, Optics and optical measurements, Protection against crime, Materials for aerospace construction, Freight distribution of goods, Sacks. Bags, Milk and milk products, Solar energy engineering, Sterilization and disinfection, Thermodynamics and temperature measurements, Environmental protection, Explosion protection, Pipeline components and pipelines, Construction industry, Protective equipment, Metrology and measurement in general.

American Society for Testing and Materials (ASTM), How to use the density cup

ASTM B873-17 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
ASTM B873-23 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
ASTM D1200-94(1999) Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM B873-12 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B???212, B???329, and B???417
ASTM D1200-10(2018) Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM B873-96 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
ASTM B873-01 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
ASTM B873-01(2007) Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
ASTM E502-07e1 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM B873-21 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
ASTM E502-07(2013) Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM D6347/D6347M-99 Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
ASTM D6347/D6347M-05(2018) Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
ASTM D1200-10(2014) Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM D4212-10(2014) Standard Test Method for Viscosity by Dip-Type Viscosity Cups
ASTM D4212-16 Standard Test Method for Viscosity by Dip-Type Viscosity Cups
ASTM D4212-16(2023) Standard Test Method for Viscosity by Dip-Type Viscosity Cups
ASTM D1505-98e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM D1505-85(1990)e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM E177-08 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM D1217-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D5195-14 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods
ASTM D1505-03 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM D1505-10 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM D6752/D6752M-17 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752/D6752M-18 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D3278-96e1 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM C1170-06 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
ASTM D6347/D6347M-05 Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
ASTM F2824-10 Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
ASTM F2824-10e1 Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
ASTM D93-11 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D7777-13 Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
ASTM D7777-13(2018)e1 Standard test method for measuring liquid petroleum density, relative density, or API fuel specific gravity using a portable density meter/hydrometer
ASTM D1505-68(1979) Standard Test Method for Density Of Plastics By The Density-Gradient Technique
ASTM D1505-18 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM E177-04 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-06 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-04e1 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E502-21a Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM D6347/D6347M-05(2010) Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
ASTM D5002-99 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-15 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-99(2005) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-99(2010) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D6857/D6857M-18 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D5002-13 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-16 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D3828-07 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D3828-07a Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D3828-98 Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM D3828-02 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D3828-97 Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM D3828-16a Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D4052-11 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM E502-21 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM E502-06a Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM E502-06 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM E502-84(2000) Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM E502-84(1994) Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM D7830/D7830M-14 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM D1200-70 Standard Method Of Test For Viscosity Of Paints, Varnishes, And Lacquers By Ford Viscosity Cup
ASTM D2839-96 Standard Test Method for Use of a Melt Index Strand for Determining Density of Polyethylene
ASTM D5125-10(2014) Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
ASTM F2824-10(2020) Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
ASTM F2824-10(2015) Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
ASTM D8188-23 Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)
ASTM D7042-04 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D93-12 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM E502-07 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM D7830/D7830M-13 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM E177-06b Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM D2638-10(2015)e1 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
ASTM D1480-93(1997) Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D5125-97 Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
ASTM D5125-97(2005) Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
ASTM D4052-22 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D1122-13 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D792-98 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D792-00 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D1217-93(2003)e1 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D792-08 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D792-13 Standard Test Methods for Density and Specific Gravity lpar;Relative Densityrpar; of Plastics by Displacement
ASTM C693-93(2003) Standard Test Method for Density of Glass by Buoyancy
ASTM D4052-15 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D7042-11a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D4253-14 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
ASTM D4253-16 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
ASTM D4253-16e1 Standard test method for maximum index density and unit weight of soil using a shaking table
ASTM D5002-18 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-19 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-18e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-22 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM E2269-21 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
ASTM C1800/C1800M-16 Standard Test Method for Determining Density of Roller-Compacted Concrete Specimens Using the Gyratory Compactor
ASTM D3143-98 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus (Withdrawn 2007)
ASTM D92-12a Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D92-12 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D92-12b Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM B329-18 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
ASTM B329-20 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
ASTM B417-22 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
ASTM B417-18 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
ASTM PS132-01 Standard Provisional Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method (Withdrawn 2003)
ASTM D1217-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D1657-22 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM F2392-04(2010) Standard Test Method for Burst Strength of Surgical Sealants
ASTM F2392-04(2015) Standard Test Method for Burst Strength of Surgical Sealants
ASTM C1170-91(1998)e1 Standard Test Methods for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
ASTM C1170/C1170M-20 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
ASTM D7454-19 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM C1170/C1170M-08 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
ASTM D1188-07 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM D1188-07(2015) Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM F2203-02 Standard Test Method for Linear Measurement Using Precision Steel Rule
ASTM F2203-13(2018) Standard Test Method for Linear Measurement Using Precision Steel Rule
ASTM F2203-02(2012) Standard Test Method for Linear Measurement Using Precision Steel Rule
ASTM D4253-00 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
ASTM D4253-00(2006) Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
ASTM D5587-14 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
ASTM F2203-13 Standard Test Method for Linear Measurement Using Precision Steel Rule
ASTM PS131-01 Standard Provisional Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method (Withdrawn 2003)
ASTM D6752/D6752M-11 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D4564-02a Standard Test Method for Density of Soil in Place by the Sleeve Method
ASTM D4564-02 Standard Test Method for Density of Soil in Place by the Sleeve Method
ASTM D2937-00e1 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
ASTM B212-21 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
ASTM B212-17 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
ASTM D1480-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM C188-14 Standard Test Method for Density of Hydraulic Cement
ASTM D4206-96 Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus
ASTM D4206-96(2001) Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus
ASTM D4206-96(2013) Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus
ASTM D4287-00(2019) Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
ASTM D1657-22e1 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D7454-08 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D7454-14e1 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D1657-89 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Thermohydrometer
ASTM D1657-12 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D5195-21 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods
ASTM D5195-14e1 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods
ASTM E2971-14 Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements
ASTM B212-12 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
ASTM E2649-20 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy
ASTM D1188/D1188M-22 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Coated Samples
ASTM B212-13 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
ASTM D2480-82e1 Test Method for Maturity Index and Linear Density of Cotton Fibers by the Causticaire Method
ASTM D2937-00 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
ASTM D4564-93 Standard Test Method for Density of Soil in Place by the Sleeve Method
ASTM C357-07 Standard Test Method for Bulk Density of Granular Refractory Materials
ASTM C271/C271M-05 Standard Test Method for Density of Sandwich Core Materials
ASTM C729-05 Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM C271/C271M-11 Standard Test Method for Density of Sandwich Core Materials
ASTM C906-95 Standard Test Method for T-Peel Strength of Hot Applied Sealants
ASTM D4444-92(2003) Standard Test Methods for Use and Calibration of Hand-Held Moisture Meters
ASTM D4444-92(1998)e1 Standard Test Methods for Use and Calibration of Hand-Held Moisture Meters
ASTM C603-04 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
ASTM C603-90(1997)e1 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
ASTM C603-14(2019) Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
ASTM C879-03 Standard Test Methods for Release Papers Used With Preformed Tape Sealants
ASTM C603-04(2008) Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
ASTM C879-03(2009) Standard Test Methods for Release Papers Used With Preformed Tape Sealants
ASTM C879-03(2014) Standard Test Methods for Release Papers Used with Preformed Tape Sealants
ASTM C603-14 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
ASTM E1130-08 Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index
ASTM C661-15 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM D1480-02e1 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D1480-02 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D1657-12(2017) Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D1480-07 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM C1621/C1621M-09b Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
ASTM E1348-90(1996) Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E1348-15e1 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM D1657-02(2007) Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D4308-12 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D4308-13 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D1122-16 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D1122-16(2017)e1 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM C661-98 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM C661-06 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM C661-06(2011) Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM D1298-12b(2017)e1 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D7042-16 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM E2971-16(2020) Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements
ASTM C1042-99 Standard Test Method for Bond Strength of Latex Systems Used With Concrete By Slant Shear
ASTM F2338-05 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
ASTM F2338-04 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
ASTM F2338-03 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
ASTM C1621/C1621M-14 Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
ASTM F88-07 Standard Test Method for Seal Strength of Flexible Barrier Materials
ASTM F88-07a Standard Test Method for Seal Strength of Flexible Barrier Materials
ASTM B962-17 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
ASTM B962-14 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy 40;PM41; Products Using Archimedesrsquo; Principle
ASTM D5931-13(2017) Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ASTM D3142/D3142M-11 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
ASTM D6822-12b(2017)e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D8188-18 Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)
ASTM E2314-03(2008) Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
ASTM D854-06e1 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D2950-09 Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
ASTM D2937-17 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
ASTM D2937-17e1 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
ASTM D854-14 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D2937-17e2 Standard Test Method for Field Determination of Soil Density by the Pushing Cylinder Method
ASTM C961-01 Standard Test Method for Lap Shear Strength of Hot-Applied Sealants
ASTM C961-97 Standard Test Method for Lap Shear Strength of Hot-Applied Sealants
ASTM E1130-90(1994)e1 Standard Test Method for Objective Measurement of Speech Privacy in Open Offices Using Articulation Index
ASTM E1130-02 Standard Test Method for Objective Measurement of Speech Privacy in Open Offices Using Articulation Index
ASTM E1130-02e1 Standard Test Method for Objective Measurement of Speech Privacy in Open Offices Using Articulation Index
ASTM D6300-06 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-04 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D1298-99e1 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D6822-12b Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D6822-02(2008) Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D2950/D2950M-14 Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
ASTM C661-15(2022) Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM C271-99 Standard Test Method for Density of Sandwich Core Materials
ASTM D6938-23 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM E2683-09 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
ASTM D6913-04 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913-04e1 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913-04(2009) Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D5004-89(2004)e1 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
ASTM D1907/D1907M-12 Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
ASTM D2950-91(1997) Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
ASTM D2950/D2950M-22 Standard Test Method for Density of Asphalt Mixtures in Place by Nuclear Methods
ASTM D5931-13 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ASTM D1298-12b(2017) Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D8097-17e1 Standard Test Method for Determination of Bulk Density for Specific Size Fractions of Calcined Petroleum Coke Using a Transaxial Pressure Pycnometer
ASTM D8097-17 Standard Test Method for Determination of Bulk Density for Specific Size Fractions of Calcined Petroleum Coke Using a Transaxial Pressure Pycnometer
ASTM D7830/D7830M-14(2021)e1 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM C907-03 Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
ASTM C907-03(2008) Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
ASTM C907-03(2012) Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
ASTM D1556/D1556M-15 Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method
ASTM D1556/D1556M-15e1 Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method
ASTM E1827-11(2017) Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
ASTM E2683-17 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
ASTM D6752-02a Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752-02 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM UOP947-96 Length and Diameter of Extruded Catalyst Using a Semi-Automated Method
ASTM D4883-99 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
ASTM D7481-09 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
ASTM D4883-03 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
ASTM D4883-08 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
ASTM D7042-16e2 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D7042-21a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM E605/E605M-19(2023) Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
ASTM D6857/D6857M-17 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method

Standard Association of Australia （SAA）, How to use the density cup

AS 1580.202.4:2005 Paints and related materials - Methods of test - Determination of density by pressure cup
AS 2341.7:1993(R2013)
AS 1289.5.3.1:2004 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand-cone pouring apparatus
AS/NZS 2891.14.2:2013
AS/NZS 2891.14.3:1999 Methods of sampling and testing asphalt - Field density tests - Calibration of nuclear thin-layer density gauge using standard blocks
AS 1289.5.8.1:1995 Methods of testing soils for engineering purposes Method 5.8.1: Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture-density gauge - Direct transmission mode
AS/NZS 2891.14.1.1:2013
AS/NZS 2891.14.1.2:2013
AS 1289.5.8.4:2009
AS 1289.5.8.4:2009/Amdt 1:2012
AS 1289.5.8.8:1998(R2013)
AS 1289.5.8.1:2007 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture?Density gauge - Direct transmission mode
AS 1289.5.3.2:2004 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the field dry density of a soil - Sand replacement method using a sand pouring can, with or without a volume displacer
AS 1774.25:1998 Refractories and refractory materials - Physical test methods - Determination of density by the Rees-Hugill method
AS 1289.5.8.7:1998(R2013)
AS 2341.7:1993 Methods of testing bitumen and related roadmaking products - Determination of density using a density bottle
AS 1289.5.4.3:2006 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Dry density ratio and moisture ratio using statistical selection of reference values
AS 1289.5.8.5:1998(R2013)
AS 4133.2.1.1:2005 Methods of testing rocks for engineering purposes - Rock porosity and density tests - Determination of rock porosity and dry density - Saturation and calliper techniques
AS 4133.2.1.2:2005 Methods of testing rocks for engineering purposes - Rock porosity and density tests - Determination of rock porosity and dry density - Saturation and buoyancy techniques
AS/NZS 2891.14.1.2:1999 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - Backscatter mode
AS/NZS 2891.14.1.1:1996 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - Direct transmission mode
AS/NZS 2891.14.2:1999 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear thin-layer density gauge
AS 1289.5.5.1:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the minimum and maximum dry density of a cohesionless material - Standard method
AS 1289.5.8.6:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Assigned density of a Type B standard density block
AS 1289.5.3.5:1997(R2013)
AS 1289.3.5.1:2006 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the soil particle density of a soil - Standard method
AS 3583.5:1991 Methods of test for supplementary cementitious materials for use with portland cement - Determination of relative density
AS 1289.5.3.5:1997 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method
AS 1289.5.8.5:1998 Methods of testing soils for engineering purposes - Soils compaction and density tests - Nuclear surface moisture-density gauges - Density of a Type A or Type C standard density block
AS 1289.5.6.1:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Density index method for a cohesionless material
AS/NZS EN 13356:2015

IN-BIS, How to use the density cup

AASHTO - American Association of State Highway and Transportation Officials, How to use the density cup

T79-1991 Standard Method of Test for Flash Point with Tag Open-Cup Apparatus for Use with Material Having a Flash Less Than 93.3 Degrees C (200 Degrees F)
T 79-1996 Standard Method of Test for Flash Point with Tag Open-Cup Apparatus for Use with Material Having a Flash Less Than 93.3 Celsius (200 Fahrenheit)
TP24-1994 Standard Test Method for Determining the Density of Freshly Mixed Concrete in Place Using a Twin-Probe Nuclear Density Gauge
T79-1996 Standard Method of Test for Flash Point with Tag Open-Cup Apparatus for Use with Material Having a Flash Less Than 93.3 Degrees C (200 Degrees F) (Twentieth Edition)
T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
T 331-2010 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 331-2008 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 331-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 366-2018 Standard Method of Test for Apparent Viscosity of Hot-Poured Asphalt Crack Sealant Using Rotational Viscometer
T 366-2017 Standard Method of Test for Apparent Viscosity of Hot-Poured Asphalt Crack Sealant Using Rotational Viscometer
T 79-2012 Standard Method of Test for Flash Point with Tag Open-Cup Apparatus for Use with Material Having a Flash Point Less Than 93°C (200°F)
TP 69-2004 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method (ASTM Designation D: 6752-02a)
T 191-2002 Standard Method of Test for Density of Soil In-Place by the Sand-Cone Method
T 191-2014 Standard Method of Test for Density of Soil In-Place by the Sand-Cone Method
T 355-2018 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods
T 355-2015 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods
T 355-2016 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods
TP 112-2014 Standard Method of Test for Determining In-Place Density and Moisture Content of Soil and Soil-Aggregate Using Complex Impedance Methodology
T204-1990 Standard Method of Test for Density of Soil in-Place by the Drive Cylinder Method
T 227-2002 Standard Method of Test for Density@ Relative Density (Specific Gravity)@ or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
T 99-2001 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
T 99-2015 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
T 99-2010 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
TP4-2000 Standard Method for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor (2000 Edition)
TP4-1993 Standard Method for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the SHRP Gyratory Compactor (Edition 1C)
T 310-2013 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
T 310-2011 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
T 310-2010 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
T205-1986 Standard Method of Test for Density of Soil in-Place by the Rubber-Balloon Method (ASTM D2167-66 (R1984))
T 99-2017 Standard Method of Test for Moisture–Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
TP 85-2010 Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument (Revision 1)
T 180-2017 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
T 180-2001 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop

RO-ASRO, How to use the density cup

SR 7184-3-2001 Soil - Determination of density. Pycnometer method using organic solvent
STAS SR ISO 7258:1996 Polytetrafluoroethylene (PTFE) tubing for aerospace aplications Methods for determination of the density and relative density

American National Standards Institute （ANSI), How to use the density cup

ANSI/ASTM E177:2013 PRACTICE FOR USE OF THE TERMS PRECISION AND BIAS IN ASTM TEST METHODS
ANSI/ASTM F3013:2013 Test Method for Density of Topsoil and Blended Soils In-Place by the Core Displacement Method
ANSI/ASTM D5524:1994 Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography
ANSI/NFPA 270-2007 Test Method for Measurement of Smoke Obscuration using a Conical Radiant Source in a Single Closed Chamber
ANSI/ASTM D5931:1998 Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ANSI S12.51-2002 Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms

British Standards Institution (BSI), How to use the density cup

BS 4140-8:1986 Methods of test for aluminium oxide. Determination of absolute density using a pyknometer
BS EN 13880-1:2003 Hot applied joint sealants - Test method for the determination of density at 25 °C
BS EN ISO 787-23:1995 General methods of test for pigments and extenders. Determination of density (using a centrifuge to remove entrained air)
BS 5293-2:1996 Sampling and testing carbon black for use in the rubber industry. Method for determination of pour density
20/30396501 DC BS ISO 24070-2. Buildings and civil engineering works. Determination of cured thickness of one-component sealants. Part 2. Cylindrical cup test method
BS 3900-A21:1998 Methods of test for paints. Determination of density by the oscillation method
BS 734-2:1959 Measurement of the density of milk using a hydrometer - Methods
BS 4140-24:1987 Methods of test for aluminium oxide. Determination of fine particle size distribution (method using electroformed sieves)
BS 3900-A19:1998 Methods of test for paints. Determination of density by the pyknometer method
BS EN ISO 787-10:1995 General methods of test for pigments and extenders. Determination of density. Pyknometer method
BS IEC 60692:2000 Nuclear instrumentation - Density gauges utilizing ionizing radiation - Definitions and test methods
BS 7034-4:1989 Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by beam bending
BS 6043-3.2:1997 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of density of cathode blocks and prebaked anodes
BS 3900-A20:1998 Methods of test for paints. Determination of density by the immersed body (plummet) method
BS 6043-2.6:1986 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of the density in xylene of calcined cokes
BS 6043-2.13:1996 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of tapped bulk density of green and calcined coke
BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites
BS EN 13880-2:2003 Hot applied joint sealants - Test method for the determination of cone penetration at 25 °C

Association Francaise de Normalisation, How to use the density cup

NF EN ISO 787-10:1995 Méthodes générales d'essai des pigments et matières de charge - Partie 10 : détermination de la masse volumique - Méthode utilisant un pycnomètre.
NF EN ISO 1183-3:1999 Plastiques - Méthodes pour déterminer la masse volumique des plastiques non alvéolaires - Partie 3 : méthode utilisant un pycnomètre à gaz
NF ISO 7631:1987 Véhicules routiers - Coupelles et joints en caoutchouc pour cylindres de dispositifs de freinage hydraulique utilisant un liquide de frein à base pétrolière (température maximale d'utilisation 120 degrés Celsius)
NF P94-061-1:1996 Sols : reconnaissance et essais - Détermination de la masse volumique d'un matériau en place - Partie 1 : méthode au gammadensimètre à pointe (à transmission directe).
NF EN ISO 8130-2:2021 Poudres pour revêtement - Partie 2 : détermination de la masse volumique à l'aide d'un pycnomètre à gaz (méthode de référence)
NF P98-880-1*NF EN 13880-1:2004 Hot applied joint sealants - Part 1 : test method for the determination of density at 25o C
NF L41-250*NF ISO 7258:1987 Polytetrafluoroethylene (ptfe) tubing for aerospace applications. Methods for the determination of the density and relative density.
NF B35-511:1983 Laboratory glassware. Density hydrometers for general purpose. Specifications. Test methods and use.
NF M60-816*NF EN ISO 9697:2019 Water quality - Gross beta activity - Test method using thick source
NF M60-815*NF EN ISO 9696:2017 Water quality - Gross alpha activity - Test method using thick source
NF EN ISO 787-23:1995 Méthodes générales d'essai des pigments et matières de charge - Partie 23 : détermination de la masse volumique (en utilisant une centrifugeuse pour chasser l'air entraîné).
NF L17-036*NF EN 3094:2017 Aerospace series - Sealants - Test method - determination of the application time
NF T43-005:1991 Non vulcanized rubber. Methods using a shearing disk viscometer.
NF ISO 7258:1987 Tubes en polytetrafluoréthylène (PTFE) à usage aéronautique - Méthodes de détermination de la masse volumique et de la densité

US-General Services, How to use the density cup

General Services FED-STD-834-2007 PERFORMANCE TEST METHOD FOR INTENSIVE USE CHAIRS

RU-GOST R, How to use the density cup

GOST 26378.4-2015 Used petroleum products. Method for determination of flash point in open cup
GOST 28959-1991 Nitric acid for industrial use. Evaluation of the nitric acid concentration by measurement of density
PNST 124-2016 Automobile roads of general use. The mineral materials for the preparation of asphalt mixtures. Method for determination of bulk density and the emptiness
GOST 27700-1988 Alumina. Absolute density determination pycnometer method
PNST 107-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of bulk density, using paraffined samples
GOST R 53888-2010 Sealing devices. Test methods of indicative seals resistance to unauthorized access. General requirements
GOST R EN 1602-2008 Thermal insulating products for building applications. Method for determination of the apparent density
GOST EN 1602-2011 Thermal insulating products in building applications. Method for determination of the apparent density
PNST 131-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determining the density of the place of application with a gamma densitometer
GOST 26378.3-2015 Used petroleum products. Method for determination of relative viscosity
GOST R 59594-2021 Soils. Field test methods with the use of resistivity cone penetration
GOST 32764-2014 Automobile roads of general use. Mineral powder. Method for determination of medium density and porosity
GOST 32763-2014 Automobile roads of general use. Mineral powder. The method of determining the true density
GOST 19823-1974 Filter air purification means for collective protection objects. Method for determination of air-tightness degree
GOST R ISO 5725-6-2002 Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values

International Organization for Standardization (ISO), How to use the density cup

ISO 24070-2:2021 Building and civil engineering sealants - Determination of cured thickness of one-component sealant - Part 2: Cylindrical cup test method
ISO 649-2:1981 Laboratory glassware; Density hydrometers for general purposes; Part 2 : Test methods and use
ISO 7258:1984 Polytetrafluoroethylene (PTFE) tubing for aerospace applications; Methods for the determination of the density and relative density
ISO 13844:2022 Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pipes — Test method for leaktightness under negative pressure, angular deflection and deformation
ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values

The American Road & Transportation Builders Association, How to use the density cup

AASHTO T 331-2010 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
AASHTO T 331-2021 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
AASHTO T 331-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
AASHTO T 331-2008 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
AASHTO T 191-2002 Standard Method of Test for Density of Soil In-Place by the Sand-Cone Method
AASHTO T 191-2014 Standard Method of Test for Density of Soil In-Place by the Sand-Cone Method
AASHTO T 355-2015 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods
AASHTO TP 112-2014 Standard Method of Test for Determining In-Place Density and Moisture Content of Soil and Soil- Aggregate Using Complex Impedance Methodology
AASHTO TP 112-2021 Standard Method of Test for Determining In-Place Density and Moisture Content of Soil and Soil-Aggregate Using Complex Impedance Methodology
AASHTO TP 85-2010 Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument
AASHTO T 99-2001 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
AASHTO T 180-2001 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
AASHTO T 275-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Paraffin-Coated Specimens
AASHTO T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 99-2010 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
AASHTO T 99-2015 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
AASHTO T 99-2021 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
AASHTO T 310-2010 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
AASHTO T 310-2013 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
AASHTO T 271-1983 Standard Method of Test for Density of Plastic and Hardened Portland Cement Concrete In-Place by Nuclear Methods
AASHTO T 79-1996 Standard Method of Test for Flash Point with Tag Open-Cup Apparatus for Use with Material Having a Flash Point Less Than 93.3 Degree C (200 Degree F)
AASHTO T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
AASHTO T 180-2010 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
AASHTO T 180-2015 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
AASHTO T 180-2018 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop

German Institute for Standardization, How to use the density cup

DIN ISO 5725-6:2002-08 Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values (ISO 5725-6:1994 including Technical Corrigendum 1:2001)
DIN 12791-3:1983 Laboratory glassware; density hydrometers; use and test methods
DIN 12791-3:1983-06 Laboratory glassware; density hydrometers; use and test methods
DIN 52102:2006 Test methods for aggregates - Determination of dry bulk density by the cylinder method and calcualtion of the ratio of density
DIN 52102:2013 Test methods for aggregates - Determination of dry bulk density by the cylinder method and calculation of the ratio of density
DIN EN 13880-1:2003 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C; German version EN 13880-1:2003
DIN EN 13880-1:2003-11 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C; German version EN 13880-1:2003
DIN ISO 7258:1987-02 Aerospace; polytetrafluoroethylene (PTFE) tubing for aerospace applications; methods for the determination of the density and relative density; identical with ISO 7258, edition 1984
DIN EN ISO 9696:2018 Water quality - Gross alpha activity - Test method using thick source (ISO 9696:2017)
DIN ISO 5725-6:2002 Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values (ISO 5725-6:1994 including Technical Corrigendum 1:2001)

(U.S.) Ford Automotive Standards, How to use the density cup

FORD BJ 154-01-2007 TEST METHOD FOR DETERMINATION OF LUBRICANTS SPECIFIC GRAVITY (CUP METHOD) ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD FLTM AA 101-04-2000 DETERMINATION OF CARBON GRADIENT USING TEST BARS

Danish Standards Foundation, How to use the density cup

DS/ISO 5725-6/Corr. 1:2010 Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
DS/EN ISO 787-23:1995 General methods of test for pigments and extenders - Part 23: Determination of density (using a centrifuge to remove entrained air)
DS/ISO 9553:2012 Solar energy - Methods of testing preformed rubber seals and sealing compounds used in collectors
DS/EN 13356:2002 Visibility accessories for non-professional use - Test methods and requirements

AENOR, How to use the density cup

UNE 111601:1990 METHOD FOR THE DENSITOMETRY OF MEDICAL AND DENTAL FILM USED WITH FLUORESCENT AND INTENSIYING SCREENS
UNE 82009-6:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 6: USE IN PRACTICE OF ACCURACY VALUES.
UNE 400311-2:1998 LABORATORY GLASSWARE. DENSITY HYDROMETERS FOR GENERAL PURPOSES. PART 2: TEST METHODS AND USE.
UNE-EN 13356:2001 Visibility accessories for non-professional use - Test methods and requirements.

TR-TSE, How to use the density cup

TS 721-1969 PLASTICS METHODS FOR MAINTA1NING CONSTANT RELATIVE HUMIDITY ?N SMALL ENCLOSURES BY MEANS OF AOUEOUS SOLUTIONS

BE-NBN, How to use the density cup

NBN T 03-232-1980 Sodium and potassium silicates for industrial use - Determination of density at 20°C of products in solution - Method using density hydrometer and method using pyknometer

SG-SPRING SG, How to use the density cup

SS 323 Pt.A2-1987 Methods Of Test For Flexible Plastic Packaging Materials Part A2 : Determination Of Density By The Density-Gradient Technique
SS 5 Pt.B11-1987 Methods Of Test For Paints, Varnishes And Related Materials Part B11: Determination Of Viscosity By Ford Viscosity Cup

NZ-SNZ, How to use the density cup

NZS 4402.5.1.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.2: Balloon Densometer Method for the Determination of the In Situ Density
NZS 4407.4.2.1:1991 Methods of sampling and testing road aggregates Test 4.2.1 Method using a nuclear surface moisture-density gauge - Direct transmission mode
NZS 4407.4.2.2:1991 Methods of sampling and testing road aggregates Test 4.2.2 Method using a nuclear surface moisture-density gauge - Backscatter mode
NZS 4402.5.1.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.1: Sand Replacement Method for the Determination of the In Situ Density
NZS 4407.4.2.4:1991 Methods of sampling and testing road aggregates Test 4.2.4 Calibration of a nuclear surface moisture-density gauge using standard blocks
NZS 4402.5.1.4:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.4: Immersion in Water Method
NZS 4402.5.1.5:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.5: Water Displacement Method
NZS 4402.5.1.3:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Sensity of Soil Test 5.1.3: Sampling Tube Method for the Determination of the In Situ Density

Indonesia Standards, How to use the density cup

SNI 14-0700-1998 Test method for mass density of wood for pulp
SNI 2827-2008

Japanese Industrial Standards Committee (JISC), How to use the density cup

JIS B 9929:2006 Standard for measuring methods of airborne ion density
JIS K 0519:1995 Testing method for density of high-purity hydrocarbons by bingham pycnometer
JIS A 1214:2001 Test method for soil density by the sand replacement method
JIS A 1214:2013 Test method for soil density by the sand replacement method
JIS R 2655:2005 Testing method for bulk density of light weight castable refractories (Method for molded goods)
JIS L 0889:2014 Test method for colour fastness to laundering with oxygen bleach

Korean Agency for Technology and Standards (KATS), How to use the density cup

KS F 2311-2016(2021) Test method for soil density by the sand replacement method
KS F 2311-2022 Test method for density of soil in place by sand-cone method
KS L 6528-2018 Test method for bulk density of artificial abrasive macrogrits
KS F 2347-2007 Testing method for density of soil in place by the rubber-ballon method
KS F 2347-1982 Testing method for density of soil in place by the rubber-ballon method
KS M 3061-2008(2013) Testing method for stiffness of plastics by means of a cantilever beam
KS D 0033-2001(2016) Method for determination of density of metal powder sintered materials
KS F 2496-2017 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS F 2495-2017(2022) Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS F 2347-2018 Standard test method for insite density of soil by the rubber-balloon method
KS F 2377-2001 Test method for preparing and determining density of hot?mix asphalt mixture by means of the gyratory compactor
KS F 2496-2017(2022) Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS M 1033-2017(2022) Testing method for density of high-purity hydrocarbons by Bingham pycnometer
KS A ISO 5725-6-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 6：Use in practice of accuracy values

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to use the density cup

GB/T 21784.2-2008 Laboratory glassware.Hydrometer for general purpose.Part 2: Test methods and use
GB/T 27800-2011 Determination of the life for static sealing rubber products
GB/T 13531.4-2013 General methods on determination of cosmetics.Determination of relative density
GB/T 17430-2015 Estimating the maximum service temperature of thermal insulation
GB/T 17430-1998 Estimating the maximum use temperature of thermal insulation
GB/T 13477.3-2002 Test method for building sealants Part 3: Determination of extrudability of sealants using standardized apparatus
GB/T 6379.6-2009 Accuracy(trueness and precision)of measurement methods and results.Part 6:Use in practice of accuracy values

PH-BPS, How to use the density cup

PNS ISO 4928:2021 Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)

VN-TCVN, How to use the density cup

TCVN 4181-2009 Standard test methods for linear density of textile fibers
TCVN 5364-1991 Textiles.Method for determination of unevenness by the USTER equipment
TCVN 6910-6-2002 Accuracy (trueness and precision) of measurement methods and results.Part 6: Use in practice of accuracy values

Lithuanian Standards Office , How to use the density cup

LST 1361.7-1995 Mineral aggregates for road construction. Testing methods. Determination of absolute density, dry bulk density, compactness and porosity
LST 1360.6-1995 Soils for road construction. Testing methods. Determination of density of soil
LST EN ISO 787-23:2002 General method of tests for pigments and extenders - Part 23: Determination of density (using a centrifuge to remove entrained air) (ISO 787-23:1979)
LST EN 13356-2002 Visibility accessories for non-professional use - Test methods and requirements
LST 1360.7-1995 Soils for road construction. Testing methods. Determination density of solid particles

ZA-SANS, How to use the density cup

SANS 60811-1-3:2001 Common test methods for insulating and sheathing materials of electric and optical cables Part 1-3: General application - Methods for determining the density - Water absorption tests - Shrinkage test

国家市场监督管理总局、中国国家标准化管理委员会, How to use the density cup

GB/T 27800-2021 Determination of the life for static sealing rubber products
GB/T 38426-2019 Test method for thermal resistance and use temperature of sleeping bags

PL-PKN, How to use the density cup

PN S47039-1992 Road vehicles. Elastomeric cups and seales for cylinders for hydraulic braking system using a non-petroleum base hydraulic brake fluid (service temperature 120 degree max)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, How to use the density cup

GB/T 13477.3-2017 Test method for building sealants—Part 3：Determination of extrudability of sealants using standardized apparatus

GOSTR, How to use the density cup

GOST R 58888-2020 Soils. Field test method with the use of cone penetration with temperature measurement

Professional Standard - Electron, How to use the density cup

SJ/T 10226-1991 Potassium silicate solution for use in electronic industry-the methods of determination for density

International Electrotechnical Commission (IEC), How to use the density cup

IEC 60692:1980 Density meters utilizing ionizing radiation. Definitions and test methods
IEC 60811-1-3/AMD1:2001 Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-3: General application - Methods for determining the density; Water absorption tests; Shrinkage test; Amendment 1
IEC 60692:1999 Nuclear instrumentation - Density gauges utilizing ionizing radiation - Definitions and test methods

European Committee for Standardization (CEN), How to use the density cup

HD 435 S1-1983 Density meters utilizing ionizing radiation; definitions and test methods
EN 3094:2017 Aerospace series - Sealants - Test method - determination of the application time
EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum

KR-KS, How to use the density cup

KS F 2347-2018(2023) Standard test method for insite density of soil by the rubber-balloon method

ES-AENOR, How to use the density cup

UNE 53-328-1985

CH-SNV, How to use the density cup

Society of Automotive Engineers (SAE), How to use the density cup

SAE J1610-1992 TEST METHOD FOR EVALUATING THE SEALING CAPABILITY OF HOSE CONNECTIONS WITH A PVT TEST FACILITY

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, How to use the density cup

PREN 3475-601-2006 Aerospace Series Cables@ Electrical@ Aircraft Use Test Methods Part 601: Smoke Density (Edition P 2)
PREN 3475-601-2001 Aerospace Series Cables@ Electrical@ Aircraft Use Test Methods Part 601: Smoke Density (Edition P 1)

Universal Oil Products Company (UOP), How to use the density cup

UOP 947-1996 LENGTH AND DIAMETER OF EXTRUDED CATALYST USING A SEMI-AUTOMATED METHOD
UOP 947-2015 Length and Diameter of Extruded Catalyst Using a Semi-Automated Method

Professional Standard - Chemical Industry, How to use the density cup

HG/T 3094-1997 Method for measuring stack height of multi-layer sealing components for hydraulic and pneumatic applications

未注明发布机构, How to use the density cup

BS ISO 5725-6:1994(2002) Accuracy (trueness and precision) of measurement methods and results — Part 6 : Use in practice of accuracy values