ZH
RU
ES
UV Calibration Curve Method
UV Calibration Curve Method, Total:109 items.
In the international standard classification, UV Calibration Curve Method involves: Geology. Meteorology. Hydrology, Analytical chemistry, Optics and optical measurements, Products of the chemical industry, Petroleum products in general, Rubber, Air quality, Protective equipment, Paints and varnishes, Waxes, bituminous materials and other petroleum products, Inorganic chemicals, Fuels, Lubricants, industrial oils and related products, Non-destructive testing, Adhesives, Edible oils and fats. Oilseeds, Water quality, Products of the textile industry, Protection against fire.
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, UV Calibration Curve Method
National Metrological Technical Specifications of the People's Republic of China, UV Calibration Curve Method
- JJF(纺织) 081-2018 Calibration Specification for Textiles Solar Ultraviolet Radiation Protective Properties Testers
- JJF(纺织)081-2018 Calibration Specification for Textiles Solar Ultraviolet Radiation Protective Properties Testers
- JJF 1880-2020 Gain Calibration Specification for Aperture Antennas from 250 MHz to 110 GHz (Extrapolation Method)
American Society for Testing and Materials (ASTM), UV Calibration Curve Method
- ASTM E2193-04 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM E2193-02a Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM E2193-02 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM E2193-08 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM G130-12(2020) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
- ASTM E2193-23 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
- ASTM G130-95(2002) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
- ASTM G130-95 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
- ASTM G130-06 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
- ASTM D2269-99e1 Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
- ASTM D2269-99(2005) Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
- ASTM D2269-10 Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
- ASTM D2269-99 Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
- ASTM D2269-10(2015) Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
- ASTM G130-12 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
- ASTM D1148-13(2018) Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
- ASTM E925-09(2014) Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
- ASTM D1148-13 Standard Test Method for Rubber Deteriorationmdash;Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
- ASTM D7183-16 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D5110-98 Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
- ASTM D5110-98(2004) Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
- ASTM D5110-22 Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
- ASTM D5110-98(2010) Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
- ASTM D5110-22a Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
- ASTM D5110-98(2017) Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
- ASTM D6544-11 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
- ASTM D4144-94(2005) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
- ASTM D4144-94(2010) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
- ASTM D2008-23 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D2269-10(2020) Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
- ASTM E925-02 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
- ASTM E925-09 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
- ASTM D4839-03(2017) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
- ASTM D2008-91(1996)e1 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D2008-91(2001) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D2008-85 Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D4144-94(1999) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
- ASTM D2008-91(2006) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D2008-12 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D2008-09 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D4144-94(2014) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
- ASTM D1840-03 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM D1840-01 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM D1840-96 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM D1840-02 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM D7183-07e1 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D7183-07 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D1840-07 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM D1840-07(2013) Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM D4839-03(2011) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
- ASTM D1148-95 Standard Test Method for Rubber Deterioration8212;Heat and Ultraviolet Light Discoloration of Light-Colored Surfaces
- ASTM D4839-94 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
- ASTM D4839-03 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
- ASTM D5453-05 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
- ASTM D1768-89(2009) Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
- ASTM D1768-89(2016) Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
- ASTM F1349-08(2019) Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors
- ASTM D1148-07a Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) and Heat Exposure of Light-Colored Surfaces
- ASTM D4799/D4799M-08(2013)e1 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
- ASTM D3658-01(2016) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
- ASTM D6667-21 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM D6667-01 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM D6667-10 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM D6667-14(2019) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM D6667-04 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM D5997-15 Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
- ASTM F1349-98(2003) Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors
- ASTM F1349-98 Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors
- ASTM D4355-99 Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon-Arc Type Apparatus)
- ASTM D1148-07 Standard Test Method for Rubber Deterioration8212;Discoloration from Ultraviolet (UV) and Heat Exposure of Light-Colored Surfaces
- ASTM D3658-90(1995) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
- ASTM D3658-01(2008) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
- ASTM F1349-08(2014) Standard Test Method for Nonvolatile Ultraviolet 40;UV41; Absorbing Extractables from Microwave Susceptors
- ASTM D7511-12(2017)e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM D7511-09e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM D7511-09 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM E2297-04(2010) Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods
- ASTM D7238-06(2017) Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
- ASTM D7238-20 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
- ASTM D5156-22 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
- ASTM D5156-02(2016) Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
- ASTM D5997-96(2000) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
YU-JUS, UV Calibration Curve Method
Association Francaise de Normalisation, UV Calibration Curve Method
- NF T75-122:1982 ESSENTIAL OILS. OILS OF CITRUS. DETERMINATION OF CD VALUE BY ULTRAVIOLET SPECTROPHOTOMETRIC ANALYSIS.
- NF X43-064*NF EN 14625:2013 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
- NF X43-062*NF EN 14212:2013 Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
- NF X21-007:2008 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steel using a calibration curve method.
German Institute for Standardization, UV Calibration Curve Method
- DIN 55912-2 Bb.2:1999 Pigments - Titanium dioxide pigments - Methods of analysis; establishing a calibration graph using the X-ray fluorescence analysis
- DIN ISO 16592:2015 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method (ISO 16592:2012)
(U.S.) Plastic Pipe Association, UV Calibration Curve Method
- PPI TN-33-2004 Standard Ultraviolet (UV) Radiation Exposure Method for Crosslinked Polyethylene (PEX) Tubing
British Standards Institution (BSI), UV Calibration Curve Method
- BS EN 14625:2012 Ambient air. Standard method for the measurement of the concentration of ozone by ultraviolet photometry
- BS EN 14625:2005 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
- BS EN 14212:2012 Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
- BS EN 14212:2012(2014) Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
- BS EN 14212:2005 Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
- BS ISO 16592:2012 Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method
European Committee for Standardization (CEN), UV Calibration Curve Method
- EN 14625:2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
CEN - European Committee for Standardization, UV Calibration Curve Method
- EN 14625:2005 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
Korean Agency for Technology and Standards (KATS), UV Calibration Curve Method
- KS D ISO 16592:2011 Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
- KS D ISO 16592-2011(2016) Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
- KS D ISO 16592-2011(2021) Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
- KS I ISO 21258:2012 Stationary source emissions-Determination of the mass concentration of dinitrogen monoxide(N2O)-Reference method:Non-dispersive infrared method
International Organization for Standardization (ISO), UV Calibration Curve Method
- ISO 16592:2006 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method
- ISO 16592:2012 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method
- ISO 10519:2015/DAmd 1:2023 Rapeseed — Determination of chlorophyll content — Spectrometric method — Amendment 1: Preparation of the calibration curve to determine the k factor