ZH
RU
ES

fiberglass rod composition

fiberglass rod composition, Total:499 items.

In the international standard classification, fiberglass rod composition involves: Products of the chemical industry, Rubber and plastics products, Materials for the reinforcement of composites, Pipeline components and pipelines, Products of the textile industry, Analytical chemistry, Fibre optic communications, Mining equipment, Construction materials, Printed circuits and boards, Insulating materials, Reinforced plastics, Materials for aerospace construction, Vocabularies, Shipbuilding and marine structures in general, Installations in buildings, Plastics, Elements of buildings, Electricity. Magnetism. Electrical and magnetic measurements, Road engineering, Non-ferrous metals, Transport, Equipment for the chemical industry, Power stations in general, Hospital equipment, Petroleum, petroleum products and natural gas handling equipment, Acoustics and acoustic measurements, Insulating fluids, Glass, Fluid storage devices, External water conveyance systems, Pharmaceutics.

Taiwan Provincial Standard of the People's Republic of China, fiberglass rod composition

• CNS 11652-1986 Glassfiber Reinforced Plastic Lamp Pole
• CNS 11653-1986 Method of Test for Glassfiber Reinforced Plastic Lamp Pole
• CNS 11656-1986 Glassfiber Reinforced Plastic Chemical-Resistant Tank
• CNS 11657-1986 Method of Test for Glassfiber Reinforced Plastic Chemical-Resistant Tank

Japanese Industrial Standards Committee (JISC), fiberglass rod composition

• JIS R 3416:1992 Finished textile glass fabrics
• JIS R 3416:2003 Finished textile glass fabrics
• JIS R 3416:2010 Finished textile glass fabrics
• JIS C 6833:1999 Multicomponent glass multimode optical fibers
• JIS R 3421:1999 Textile finished glass fabrics for bag filter
• JIS R 3421:2006 Textile finished glass fabrics for bag filter
• JIS K 7095:2012 Testing method for glass transition temperatures of carbon fibre reinforced plastics by thermal analysis
• JIS K 7040:1998 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method

American National Standards Institute （ANSI), fiberglass rod composition

• ANSI/ASTM D2997:2001 Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
• ANSI/TAPPI T1012 om-2010 Moisture content of fiber glass mats
• ANSI/TAPPI T1014 om-2010 Moisture sensitivity of fiber glass mats
• ANSI/ASTM F1092:2014 Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard@ Square Railing Systems
• ANSI/ASTM D4097:2018 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

RU-GOST R, fiberglass rod composition

• GOST R 56250-2014 Glassfiber. Silicafiber. Methods for determination of chemical composition
• GOST 6943.18-1994 Textile glass. Woven fabrics. Non-woven cloth. Methods for determination of thikness
• GOST 6943.17-1994 Textile glass. Woven fabrics. Non-woven cloth. Methods for determination of width and length
• GOST 6943.16-1994 Textile glass. Woven fabrics. Non-woven cloth. Methods for determination of mass per unit area
• GOST 34246-2017 Fiberglass. Fabric. Unwoven textile. Method for determination of contact mouldability
• GOST R 55068-2012 Glass-fibre and basalt-fibre reinforced epoxy plasticpipes and parts of pipelines. Specifications
• GOST R 59411-2021 Field pipelines from glass-fiber reinforced plastic pipes. Rules of design and operation
• GOST R 56657-2015 Polymer composites. Method for determination of flexural properties of glass-fibre reinforced pultruded plastic rods
• GOST 6943.15-1994 Textile glass. Woven fabrics. Non-woven cloth. Methods for determination of number of yarns per unit length of warp and weft
• GOST R 54560-2011 Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications
• GOST R 57035-2016 Fiberglass-reinforced thermosetting plastic pipes and parts of pipelines. Determination of resistance to cyclic internal pressure

Korean Agency for Technology and Standards (KATS), fiberglass rod composition

• KS L 2314-2015(2020) Finished textile glass fabrics
• KS L ISO 4900:2013 Textile glass-Mats and fabrics-Determination of contact mouldability
• KS L ISO 4900:2008 Textile glass-Mats and fabrics-Determination of contact mouldability
• KS C IEC 61067-2-2014(2019) Specification for glass and glass polyester fibre woven tapes — Part 2: Methods of test
• KS C IEC 61067-1:2008 Specification for glass and glass polyester fibre woven tapes－Part 1：Definitions, classification and general requirements
• KS C IEC 61067-1-2008(2018) Specification for glass and glass polyester fibre woven tapes－Part 1：Definitions, classification and general requirements
• KS L ISO 7884-3:2003 Glass－Viscosity and viscometric fixed points－Part 3：Determination of viscosity by fibre elongation viscometer
• KS C IEC 60819-3-1:2021 Non-cellulosic papers for electrical purposes — Part 3: Specifications for individual materials — Sheet 1: Filled glass paper

Professional Standard - Coal, fiberglass rod composition

• MT/T 1061-2008 Fiber glass reiuforced plastics bar of bolt and accessories

国家安全生产监督管理总局, fiberglass rod composition

• MT/T 1061-2007 Resin anchor glass fiber reinforced plastic rod body and accessories

GB-REG, fiberglass rod composition

• REG UFGS-06 82 14-2009 FIBERGLASS REINFORCED PLASTIC (FRP) PIPE AND TUBE RAILINGS
• REG UFGS-06 82 14-2012 FIBERGLASS REINFORCED PLASTIC (FRP) PIPE AND TUBE RAILINGS

US-FCR, fiberglass rod composition

• FCR UFGS-06 82 14-2015 FIBERGLASS REINFORCED PLASTIC (FRP) PIPE AND TUBE RAILINGS

Professional Standard - Building Materials, fiberglass rod composition

• JC/T 171.1-2005 Coated glassfiber woven Part 1：Silicone rubber coated glass woven
• JC 561.1-2006 Glass fiber reinforcing mesh Part 1: Glass fiber reinforcing mesh for resinic grinding wheel
• JC/T 561.1-2006 Glass fiber reinforcing mesh Part1:Glass fiber reinforcing mesh for resinic grinding wheel
• JC/T 171.2-2008 Coated glassfiber woven.Part 2: PTFE emulation coated glass woven
• JC 839.1-1998 Fiberglass Geogrid Part 1: Fiberglass Geogrid for Asphalt Pavements
• JC 284-1980 Classification regulations for glass fiber coated window screens
• JC 561.2-2006 Glass fiber reinforcing mesh Part 2: Glass fiber reinforcing mesh for class PB EIFS
• JC/T 561.2-2006 Glass fiber reinforcing mesh Part 2:Glass fiber reinforcing mesh for class PB EIFS
• JC/T 283-1980 Regulations on Classification of Glass Fiber Coated Plastic Packaging Cloth
• JC/T 658.2-2011 Glass fiber reinforced plastics water tanks.Part 2:Hand lay-up whole water tanks
• JC/T 658.2-1997 Fiberglass reinforced plastics water tanks Part 2 hand lay-up molding integral type water-tanks
• JC/T 658.1-2007 Glass fiber reinforced plastics water tanks.Part 1: SMC sectional water tanks
• JC/T 658.1-1997 Glass fiber reinforced plastic water tank part one SMC combined water tank

U.S. Military Regulations and Norms, fiberglass rod composition

• ARMY MIL-M-55220 A NOTICE 1-1996 MAST AB-577()/1GRC
• ARMY MIL-M-55220 A-1973 MAST AB-577()/1GRC
• ARMY MIL-M-46861 B NOTICE 1-1996 MOLDING MATERIAL, GLASS MAT, EPOXY COATED
• ARMY MIL-M-46861 B-1991 MOLDING MATERIAL, GLASS MAT, EPOXY COATED
• ARMY MIL-P-43043 C VALID NOTICE 4-2013 Plastic Molding Material, Pre-Mix, Polyester, Glass Fiber Reinforced
• ARMY MIL-R-60346 C VALID NOTICE 5-2010 Roving, Glass, Fibrous (for Prepreg Tape and Roving, Filament Winding, and Pultrusion Applications

German Institute for Standardization, fiberglass rod composition

• DIN 61853-2:1987 Textile glass; textile glass mats for plastics reinforcement; classification and application
• DIN VDE 0334-1:1972 Regulations for textile glass products in electrical engineering; part 1: Textile glass fabrics
• DIN EN 61067-2:1998 Specification for glass and glass polyester fibre woven tapes - Part 2: Methods of test (IEC 61067-2:1992); German version EN 61067-2:1997
• DIN EN 12971-1:1999 Reinforcements - Specification for textile glass chopped strands - Part 1: Designation; German version EN 12971-1:1999
• DIN EN 12654-1:1998 Textile glass - Yarns - Part 1: Designation; German version EN 12654-1:1998
• DIN 65090:1979 Aerospace; textile glass, preimpregnated filament glass cloth from E-glass (Prepreg), technical specifications
• DIN VDE 0365-3:1967 Regulations for varnished fibrous materials for electrical engineering; part 3: Varnished glass fabrics
• DIN EN 12971-3:1999 Reinforcements - Specification for textile glass chopped strands - Part 3: Specific requirements; German version EN 12971-3:1999
• DIN EN 61067-1:1998 Specification for glass and glass polyester fibre woven tapes - Part 1: Definitions, classification and general requirements (IEC 61067-1:1991); German version EN 61067-1:1997
• DIN EN 1170-2:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC; "wash out test"; German version EN 1170-2:1997
• DIN EN 14020-1:2003 Reinforcements - Specification for textile glass rovings - Part 1: Designation; German version EN 14020-1:2002
• DIN EN 12971-2:1999 Reinforcements - Specification for textile glass chopped strands - Part 2: Test methods and general requirements; German version EN 12971-2:1999
• DIN EN 12654-3:1998 Textile glass - Yarns - Part 3: General requirements for general applications; German version EN 12654-3:1998
• DIN 28145-6:1979 Parts welded to glass lined agitator vessels; bracket
• DIN EN 14020-3:2003 Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements; German version EN 14020-3:2002
• DIN EN 15191:2010-04 Precast concrete products - Classification of glassfibre reinforced concrete performance; German version EN 15191:2009 / Note: Applies in conjunction with DIN EN 1169 (1999-10).
• DIN EN 15191:2023-11 Precast concrete products - Classification of Glass fibre Reinforced Concrete performance; German and English version prEN 15191:2023 / Note: Date of issue 2023-10-13*Intended as replacement for DIN EN 15191 (2010-04).
• DIN EN 12654-2:1998 Textile glass - Yarns - Part 2: Methods of test and general specifications; German version EN 12654-2:1998
• DIN EN 2833-005:2014 Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate; German and English version EN 2833-005:2013
• DIN EN 61067-3-1:1998 Glass and glass polyester fibre woven tapes - Part 3: Specifications for individual materials; Sheet 1: Type 1, 2 and 3 tapes (IEC 61067-3-1:1995); German version EN 61067-3-1:1995
• DIN EN 2833-005:2014-02 Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate; German and English version EN 2833-005:2013
• DIN EN 1170-3:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC; German version EN 1170-3:1997
• DIN EN 1170-3:1998-01 Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC; German version EN 1170-3:1997
• DIN 16869-1:2014 Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 1: Dimensions
• DIN 16869-1:1995 Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 1: Dimensions
• DIN EN ISO 14692-2 Berichtigung 1:2007 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002); English version EN ISO 14692-2:2002, Corrigenda to DIN EN ISO 14692-2:2005-07; English version EN ISO 14692-2:2002/AC
• DIN EN 1170-8:2009-05 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test; German version EN 1170-8:2008
• DIN EN 13280:2001-12 Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water; German version EN 13280:2001
• DIN EN 1170-8:2009 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test; English version of DIN EN 1170-8:2009-05
• DIN ISO 7884-3:1998 Glass - Viscosity and viscometric fixed points - Part 3: Determination of viscosity by fibre elongation viscometer (ISO 7884-3:1987)
• DIN EN ISO 14692-3 Berichtigung 1:2007 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002); English version EN ISO 14692-3:2002, Corrigenda to DIN EN ISO 14692-3:2005-07; English version EN ISO 14692-3:2002/AC:2006
• DIN EN 14020-2:2003 Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements; German version EN 14020-2:2002
• DIN EN 60454-3-8:2006 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre (IEC 60454-3-
• DIN EN ISO 14692-3:2005 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002); English version EN ISO 14692-3:2002
• DIN EN 15191:2010 Precast concrete products - Classification of glassfibre reinforced concrete performance; German version EN 15191:2009
• DIN 16948-1:1975 Glass fibre reinforced reaktion moulding materials in the moulded state; classification and designation
• DIN EN 1170-2:1998-01 Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC; "wash out test"; German version EN 1170-2:1997
• DIN EN 637:1994 Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method; German version EN 637:1994

International Organization for Standardization (ISO), fiberglass rod composition

• ISO 1888:1979 Textile glass; Determination of the average diameter of staple fibres or continuous filaments constituting a textile glass yarn; Cross-section method
• ISO 3597:1977 Textile glass reinforced plastics; Composites in the form of rods made from textile glass rovings; Determination of flexural (cross-breaking) strength
• ISO 3605:1978 Textile glass reinforced plastics — Composites in the form of rods made from textile glass rovings — Determination of compressive strength
• ISO 8605:1989 Textile glass reinforced plastics; sheet moulding compound (SMC); basis for a specification
• ISO 7510:2017 Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents
• ISO 7510:1997 Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents using the gravimetric method
• ISO 2559:1980 Textile glass — Mats (made from chopped or continuous strands) — Basis for a specification
• ISO 2559:2000 Textile glass - Mats (made from chopped or continuous strands) - Designation and basis for specifications
• ISO 17771:2003 Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC
• ISO 2559:2011 Textile glass - Mats (made from chopped or continuous strands) - Designation and basis for specifications
• ISO 14692-3:2002 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System piping
• ISO/PAS 22101-1:2022 Polyethylene reinforced with short glass fibres (PE-sGF) piping systems for industrial applications — Part 1: General
• ISO/PAS 22101-2:2022 Polyethylene reinforced with short glass fibres (PE-sGF) piping systems for industrial applications — Part 2: Pipes

United States Navy, fiberglass rod composition

• NAVY MIL-M-46069 ADMIN NOTICE 5-2005 MOLDING PLASTIC, GLASS/EPOXY PRE-MIX
• NAVY MIL-M-46069 (2)-1965 MOLDING PLASTIC, GLASS/EPOXY PRE-MIX
• NAVY MIL-M-46069-1964 MOLDING PLASTIC, GLASS/EPOXY PRE-MIX

American Society for Testing and Materials (ASTM), fiberglass rod composition

• ASTM D2310-06(2012) Standard Classification for Machine-Made ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
• ASTM C1355/C1355M-96(2006) Standard Specification for Glass Fiber Reinforced Gypsum Composites
• ASTM F711-00 Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools
• ASTM F711-17 Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools
• ASTM D3916-08(2016) Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
• ASTM D7957/D7957M-17 Standard Specification for Solid Round Glass Fiber Reinforced Polymer Bars for Concrete Reinforcement
• ASTM F1092-87(1994)e1 Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm- and Guard-Square Handrails
• ASTM F1092-19 Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems
• ASTM D2310-06 Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
• ASTM D2310-01 Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
• ASTM D2310-97 Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
• ASTM D2563-08 Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
• ASTM E1888/E1888M-12 Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores
• ASTM F1536-95(1999) Standard Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape
• ASTM F1536-95(2005) Standard Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape
• ASTM F1536-95(2010) Standard Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape
• ASTM F1536-95(2015) Standard Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape
• ASTM D2563-94(2002)e1 Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
• ASTM D2563-94 Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
• ASTM D2563-08(2015) Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
• ASTM F1536-95(2015)e1 Standard Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape

国家发展和改革委员会, fiberglass rod composition

• JC 561.1-2005 Reinforced fiberglass mesh Part 1: Fiberglass mesh for resin grinding wheels
• JC 561.2-2005 Reinforced fiberglass mesh Part 2: Fiberglass mesh for polymer-based exterior wall insulation

British Standards Institution (BSI), fiberglass rod composition

• BS DD IEC/PAS 61249-6-3:2011 Specification for finished fabric woven from "E" glass for printed boards
• BS EN 61067-1:1997 Glass and glass polyester fibre woven tapes. Definitions, classification and general requirements
• BS 3953:1990 Specification for synthetic resin bonded woven glass fabric laminated sheet
• BS 2782-10 Method 1006:1978 Methods of testing plastics - Glass reinforced plastics - Determination of volatile matter and resin content of synthetic resin-impregnated textile glass fabric
• BS 3396-3:1987 Woven glass fibre fabrics for plastics reinforcement - Specification for finished fabrics for use with polyester resin systems
• BS EN 15191:2010 Precast concrete products. Classification of glassfibre reinforced concrete performance
• BS EN 15191:2009 Precast concrete products. Classification of glassfibre reinforced concrete performance
• BS 3396-1:1991 Woven glass fibre fabrics for plastics reinforcement - Specification for loom-state fabrics
• BS 3396-2:1987 Woven glass fibre fabrics for plastics reinforcement - Specification for desized fabrics

CZ-CSN, fiberglass rod composition

• CSN ON 80 0280-1967
• CSN ISO 7884-3:1994 Glass - Viscosity and viscometric fixed points - Part 3: Determination of viscosity by fibre elongation viscometer

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, fiberglass rod composition

• GB/T 1549-2008 Chemical analysis methods of glass,glass marble and vitreous fiber
• GB/T 13096.1-1991 Test method for tensile properties of pultruded glass fiber reinforced plastic rods
• GB/T 13096.2-1991 Test method for flexural properties of pultruded glass fiber reinforced plastic rods
• GB/T 13096-2008 Test method for mechanical properties of pultruded glass fiber reinforced plastic rods
• GB/T 7190.2-1997 Glass fiber reinforced plastic cooling tower--Part 2: Large glass fiber reinforced plastic cooling tower
• GB/T 7190.2-2008 Glass fiber reinforced plastic cooling tower.Part2:Large glass fiber reinforced plastic cooling tower
• GB/T 7190.1-1997 Glass fiber reinforced plastic cooling tower--Part 1: Middle-small type glass fiber reinforced plastic cooling tower
• GB/T 7190.1-2008 Glass fiber reinforced plastic cooling tower.Part 1:Middle and small glass fiber reinforced plastic cooling tower
• GB/T 31957-2015 Test method of chemical resistance of glass fibers
• GB/T 13096.3-1991 Test method for inplane shear strength of pultruded glass fiber reinforced plastic rods
• GB/T 20627.2-2006 Specification for glass and glass polyester fibre woven tapes-Part2:Methods of test
• GB/T 20627.1-2006 Specification for glass and glass polyester fibre woven tapes-Part 1:Definitions,classification and general requirements
• GB/T 7690.5-2001 Reinforcement--Test method for yarns Part 5: Determination of fibre diameter for glass fibre
• GB/T 7690.5-2013 Reinforcements.Test method for yarns.Part 5:Determination of fiber diameter for glass fiber
• GB/T 7113.5-2011 Flexible insulating sleeving.Part 5: Glass textile sleeving with silicone elastomer coating
• GB/T 6006.3-2001 Test method for glass mats Part 3: Determination of thickness
• GB/T 7113.3-2011 Flexible insulating sleeving.Part 3:Glass textile sleeing with PVC coating
• GB/T 7113.4-2011 Flexible insulating sleeving.Part 4: Glass textile sleeving with acrylic based coating
• GB/T 7113.6-2011 Flexible insulating sleeving.Part 6: Glass textile sleeving with polyurethane(PUR) based coating
• GB/T 6006.3-2013 Test method for glass mats.Part 3:Determination of thickness
• GB/T 13096.4-1991 Test method for apparent horizontal shear strength of pultruded glass fiber reinforced plastic rods by the short-beam method
• GB/T 24721.1-2009 Glass fiber reinforced plastic product for highway.Part 1:General rule
• GB/T 24721.2-2009 Glass fiber reinforced plastic product for highway.Part 2:Trunk
• GB/T 24721.3-2009 Glass fiber reinforced plastic product for highway.Part 3:Duct
• GB/T 24721.3-2023 Glass fiber reinforced plastic products for road use - Part 3: Pipes
• GB/T 24721.2-2023 Glass fiber reinforced plastic products for road use - Part 2: Pipe boxes
• GB/T 24721.1-2023 Glass fiber reinforced plastic products for road use Part 1: General principles
• GB/T 24721.5-2009 Glass fiber reinforced plastic product for highway.Part 5:Sign base panel
• GB/T 24721.5-2023 Glass fiber reinforced plastic products for road use - Part 5: Base plates for signs
• GB/T 6006.1-2001 Test method for glass mats Part 1: Determination of styrene solubility
• GB/T 6006.2-2001 Test method for glass mats Part 2: Determination of tensile breaking force
• GB/T 6006.1-2013 Test method for glass mats.Part 1:Determination of styrene solubility
• GB/T 6006.2-2013 Test method for glass mats.Part 2:Determination of tensile breaking force
• GB/T 7689.1-2001 Reinforcements--Test method for woven fabrics Part 1: Determination of thickness for glass fibre
• GB/T 9914.2-2001 Test method for reinforcement products Part 2: Determination of combustible matter content for glass fibre
• GB/T 24721.4-2009 Glass fiber reinforced plastic product for highway.Part 4:Non-pressure communications well lid
• GB/T 24721.4-2023 Glass fiber reinforced plastic products for road use - Part 4: Unpressurized communication manhole covers
• GB/T 29165.3-2015 Petroleum and natural gas industries.Glass-reinforced plastics (GRP) piping.Part 3:System design
• GB/T 9914.2-2013 Test method for reinforcement products.Part 2:Determination of combustible-matter content for glass fibre
• GB/T 29165.2-2022 Petroleum and natural gas industries—Glass-reinforced plastics (GRP) piping—Part 2: Qualification and manufacture
• GB/T 29165.2-2012 Petroleum and natural gas industries.Glass-reinforced plastics(GRP) piping.Part 2:Qualification and manufacture

工业和信息化部, fiberglass rod composition

• JC/T 171.2-2019 Coated fiberglass cloth Part 2: PTFE emulsion coated fiberglass cloth
• YD/T 1181.1-2015 Characteristics of non-metallic reinforcements for optical cables Part 1: Glass fiber reinforced plastic rods

Association Francaise de Normalisation, fiberglass rod composition

• NF EN 61067-2:1997 Spécification pour rubans tissés en fibres de verre ou en fibres de verre et de polyester - Partie 2 : méthodes d'essai.
• NF B38-105:1980 Glass fibre - Determination of linear density of glass fibre and filament yarns forming a textile sample of reduced dimensions
• NF EN 61067-1:1997 Spécification pour rubans tissés en fibres de verre ou en fibres de verre et de polyester - Partie 1 : définitions, classification et prescriptions générales.
• NF C26-156*NF EN 61067-2:1997 Specification for glass and glass polyester fibre woven tapes. Part 2 : methods of test.
• NF T51-143:1974 Plastics. Filled polyamides. Determination of percentages of graphite or carbon black and fiber glass.
• NF L17-740-005*NF EN 2833-005:2014 Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005 : glass fabric/phenolic resin preimpregnate
• NF EN 61067-3-1:1995 Rubans tissés en fibres de verre et en fibres de verre et de polyester - Partie 3 : spécifications pour les matériaux particuliers - Feuille 1 : rubans de types 1, 2 et 3
• NF C26-155*NF EN 61067-1:1997 Specification for glass and glass polyester fibre woven tapes. Part 1 : definitions, classification and general requirements.
• NF B38-116-1*NF EN 12654-1:1999 Textile glass. Yarns. Part 1 : designation.
• NF B38-160-1*NF EN 14020-1:2003 Reinforcements - Specification for textile glass rovings - Part 1 : designation
• NF B38-510-1*NF EN 12971-1:1999 Reinforcements. Specification for textile glass chopped strands. Part 1 : designation.
• NF B38-116-2*NF EN 12654-2:1999 Textile glass. Yarns. Part 2 : methods of test and general specifications.
• NF B38-307-1*NF EN 14118-1:2003 Reinforcements - Specification for textile glass mats (chopped strand and continuous filaments mats) - Part 1 : designation
• NF P19-209*NF EN 15191:2010 Precast concrete products - Classification of glassfibre reinforced concrete performances
• NF EN 60819-3-1:2002 Papiers non cellulosiques à usages électriques - Partie 3 : spécifications pour matériaux particuliers - Feuille 1 : papier chargé à base de fibres de verre
• NF C26-157-1*NF EN 61067-3-1:1995 Glass and glass polyester fibre woven tapes. Part 3 : specifications for individual materials. Sheet 1 : types 1, 2 and 3 tapes.
• NF EN 60454-3-8:2006 Rubans adhésifs sensibles à la pression à usages électriques - Partie 3 : spécifications pour matériaux particuliers - Feuille 8 : tissus de verre avec un adhésif sensible à la pression, acétate de cellulose seul ou combiné avec de la fibre v...
• NF B38-510-3*NF EN 12971-3:1999 Reinforcements. Specification for textile glass chopped strands. Part 3 : specific requirements.
• NF B38-160-3*NF EN 14020-3:2003 Reinforcements - Specification for textile glass rovings - Part 3 : specific requirements.
• NF EN 4718:2022 Série aérospatiale - Polyétheréthercétone avec 55 % de fibre de verre continue par volume (PEEK-GF55) - Demi-produit - Spécification de matériau
• NF B38-307-3*NF EN 14118-3:2003 Reinforcements - Specification for textile glass mats (chopped strand and continuous filament mats) - Part 3 : specific requirements
• NF P19-829-8*NF EN 1170-8:2008 Test method for glass-fibre reinforced cement - Part 8 : cyclic weathering type test
• XP L17-740-1*XP PR EN 2833-1:1995 Aerospace series. Glass fibre thermosetting preimpregnates. Technical specification. Part 1 : general.
• NF C26-148-8*NF EN 60454-3-8:2006 Pressure-sensitive adhesive tapes for electrical purposes - Part 3 : specifications for individual materials - Sheet 8 : woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre
• NF M88-557-3:2008 GRP tanks and vessels for use above ground - Part 3 : design and workmanship.
• NF M88-557-3/IN1:2010 GRP tanks and vessels for use above ground - Part 3 : design and workmanship.
• NF M88-557-3:2010 GRP tanks and vessels for use above ground - Part 3 : design and workmanship.
• NF M88-557-3*NF EN 13121-3:2016 GRP tanks and vessels for use above ground - Part 3 : design and workmanship
• NF T57-200:1973 Pipes and fittings of composite glass. Thermosetting materials. General review. Description. Classification. Characteristics.
• NF P38-504:1984 GLASS FIBRE REINFROCED CORRUGATED OR RIBBED POLYESTER SHEETS. STATIC DEFLECTION TESTS UNDER DISTRIBUTED LOAD.
• NF B38-307-2*NF EN 14118-2:2003 Reinforcements - Specification for textile glass mats (chopped strand and continuous filament mats) - Part 2 : methods of test and general requirements.
• NF M87-243-3:2003 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3 : system design.
• NF B38-232:1992 Textile glass - Woven fabrics - Sateen of 4 weight category 290 g/m - Specification
• NF B38-231:1992 Textile glass - Woven fabrics - Sateen of 4 weight category 288 g/m - Specification
• NF B38-211:1992 Textile glass - Woven fabrics of yarn - Cloth of weight category 49 g/m - Specification
• NF B38-216:1992 Textile glass - Woven fabrics of yarn - Cloth of weight category 202 g/m - Specification
• NF B38-217:1992 Textile glass - Woven fabrics of yarn - Cloth of weight category 220 g/m - Specification
• NF B38-218:1992 Textile glass - Woven fabrics of yarn - Cloth of weight category 425 g/m - Specification
• NF B38-160-2*NF EN 14020-2:2003 Reinforcements - Specification for textile glass rovings - Part 2 : methods of test and general requirements
• NF B38-510-2*NF EN 12971-2:1999 Reinforcements. Specification for textile glass chopped strands. Part 2 : test methods and general requirements.
• NF C27-228-3-1*NF EN 60819-3-1:2002 Non-cellulosic papers for electrical purposes - Part 3 : specifications for individual materiels - Sheet 1 : filled glass paper

GM North America, fiberglass rod composition

• GM 9986027-1993 SRIM, Woven and Chopped Fiberglass Mat Reinforcement
• GM GMP.PP.047-1994 Polypropylene - 30% Long Glass Fiber Reinforced, Stampable Sheet
• GM GMP.PP.058-1995 Polypropylene - 40% Long Glass Fiber Reinforced Stampable Sheet
• GM GMP.UP.011-1995 Polyester Preform - Hand Pour, Compression Mold, 44% Glass Fiber Reinforced
• GM GMN3942-2002 Polyurethane, 47 % Glass Fibers, Directed Preform, 9000 MPa Flexural Modulus
• GM GMP.PA6.027-1997 Nylon 6 - 30% Glass Fiber Reinforced, Heat Stabilized, Reduced Moisture
• GM GMP.PUR.002-1994 Polyurethane RRIM - 5% Glass Fiber, 450 MPa Flexural Modulus
• GM GMP.PUR.003-1992 Polyurethane RRIM - 20% Glass Fiber, 900 MPa
• GM GMP.PUR.004-1994 Polyurethane RRIM - 15% Glass Fiber, 450 MPa
• GM GMP.PUR.005-1995 Polyurethane RRIM - 10% Flake Glass, 350 MPa Flexural Modulus
• GM GMP.PUR.018-1995 Polyurethane RRIM - 20% Glass Fiber, 700 MPa Flexural Modulus
• GM GMP.PUR.024-1995 Polyurethane SRIM - 48% Directed Fiber Glass, 9000 MPa
• GM GMP.PUR.026-1995 Polyurethane RRIM - 15% Milled Fiber Glass, 750 MPa Flexural Modulus
• GM GMP.PA6.028-1997 Nylon 6 - 20% Glass Fiber Reinforced, Impact Modified, Heat Stabilized,Reduced Moisture
• GM GMP.PUR.017-1993 HP Polyurethane RRIM - 22% Glass Fiber, 1000 MPa Flexural Modulus
• GM GMP.E/MA.016-2003 E/MA-Ionomer - UV Stabilized, 4% Glass Fiber Filled, 900 MPa Flexural Modulus, Injection Molded
• GM GMP.UP.009-2014 Polyester SMC - Injection Molded, 22.5% Glass Reinforced (Issue 2; Do Not Use on New Programs; Replaced by GMW17170)
• GM GMP.UP.014-2014 Polyester BMC - Injection Molded, 11% Glass Reinforced (Issue 5; Do Not Use on New Programs; Replaced by GMW17170)
• GM GMP.PUR.025-1995 Polyurethane IMR SRIM Foam - 19% Continuous Strand Fiberglass Mat, 950 MPa
• GM GMP.PA6.026-1997 Nylon 6 - 30% Glass Fiber Reinforced, UV Stabilized, Impact Modified, Heat Stabilized, Reduced Moisture

Society of Automotive Engineers (SAE), fiberglass rod composition

• SAE AMS3812-1978 RODS, GLASS FIBER/POLYESTER RESIN, COATED Pultrusion
• SAE AMS3812B-1998 Rods, Glass Fiber, Polyester Resin, Loaded Pultrusion
• SAE AMS3710B-2011 SANDWICH STRUCTURES, GLASS FABRIC-RESIN Low Pressure Molded, Heat Resistant
• SAE AMS3710A-1980 SANDWICH STRUCTURES, GLASS FABRIC-RESIN Low Pressure Molded, Heat Resistant
• SAE AMS3710-1961 SANDWICH STRUCTURES, GLASS FABRIC-RESIN Low Pressure Molded, Heat Resistant
• SAE AMS3670/4C-1995 Polyamide-Imide Bar, Rod, and Shapes 30% Glass Fiber
• SAE AMS3710C-2022 Sandwich Structures, Glass Fabric-Resin Low Pressure Molded, Heat Resistant
• SAE AMS3672B-1992 PLASTIC MOLDING COMPOUND, EPI-BIS EPOXY Glass Fiber Reinforced, Structural
• SAE AMS3672-1981 PLASTIC MOLDING COMPOUND, EPI-BIS EPOXY Glass Fiber Reinforced, Structural

ES-UNE, fiberglass rod composition

• ESPECIFICACION UNE 0072:2021 Fiberglass reinforced polyester poles for overhead telecommunication lines.
• UNE 83516:2023 Fibre reinforced concrete. Fibres for concrete. Alkali resistant glass fibres. Definitions, classification and specifications.
• UNE-EN 2833-005:2013 Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate (Endorsed by AENOR in October of 2013.)
• UNE-EN 1170-3:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC
• UNE-EN 13280:2002 Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water
• UNE-EN 1170-8:2009 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test
• UNE-EN 1170-2:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC, "Wash out test"

TR-TSE, fiberglass rod composition

• TS 2404-1976 DETERMINATION OF THE AVERAGE DIAMETER OF STAPLE FIBRES OR CONTINUOUS FILAMENTS CONSTITUTING A TEXTILE GLASS YARN

Professional Standard - Aviation, fiberglass rod composition

• HB 5011-1994 Low-pressure formed glass fiber reinforced plastic aerospace parts
• HB/Z 5010-1974 Manufacturing Technology of Low Pressure Formed Glass Fiber Reinforced Plastic Aeronautical Parts
• HB/Z 5010-1994 Manufacturing Technology of Low Pressure Formed Glass Fiber Reinforced Plastic Aeronautical Parts

SAE - SAE International, fiberglass rod composition

• SAE AMS3812C-2016 Rods@ Glass Fiber@ Polyester Resin@ Loaded Pultrusion
• SAE AMS3672A-1987 PLASTIC MOLDING COMPOUND@ EPI-BIS EPOXY Glass Fiber Reinforced@ Structural
• SAE AMS3672C-1995 PLASTIC MOLDING COMPOUND@ EPI-BIS EPOXY Glass Fiber Reinforced@ Structural

GM Europe, fiberglass rod composition

• GME TM 703700-1986 Faserplastmatte auf Glasfaserbasis, kunstharzgebunden Fibre Plastic Mat Based on Glass Fibres, Bonded with Synthetic Resin German
• GME TM 942500-1996 Verbundwerkstoff, formgepre遲, f黵 Formhimmel, Tr鋑er auf Glasfaserbasis Compression Molded Composite Material for Formed Headliners, Substrate based on Glass Fibres English/German
• GME TM 942500-2013 Compression Molded Composite Material for Formed Headliners, Substrate based on Glass Fibres
• GME TM 943600-2013 Composite Material for Formed Headliners, Carrier based on Glass Fibre, bonded with Polyester Resin

(U.S.) Ford Automotive Standards, fiberglass rod composition

• FORD WSB-M11P27-B-2000 ADHESION REQUIREMENT, ADHESIVE FOR BONDING FRP/FRP AND FRP/PAINTED METAL PARTS ASSEMBLED AFTER VEHICLE ELECTROCOAT
• FORD WSB-M4D882-A1-2001 ACETAL (POM) COPOLYMER, 10% GLASS FIBER REINFORCED MOLDING COMPOUND
• FORD WSB-M4D883-A1-2001 ACETAL (POM) COPOLYMER, 20% GLASS FIBER REINFORCED MOLDING COMPOUND
• FORD ESK-M96D3-A-1994 PUR FOAM MOULDED, RIGID, GLASS FIBER MAT REINFORCED
• FORD WSB-M4D732-A4-1995 POLYPROPYLENE (PP) HOMOPOLYMER, GLASS FIBER/MICA REINFORCED MOLDING COMPOUND
• FORD WSB-M4D854-A1-2006 POLYPROPYLENE (PP), 30 % GLASS FIBER REINFORCED REMANUFACTURED MOLDING COMPOUND
• FORD WSB-M4D854-A2-2006 POLYPROPYLENE (PP), 40 % GLASS FIBER REINFORCED REMANUFACTURED COMPOUND
• FORD WSK-M3D175-A-1995 UNSATURATED POLYESTER (PU), 20% CONTINUOUS, GLASS FIBER REINFORCED MOLDING COMPOUND
• FORD WSK-M4D872-A-1993 POLYPHTHALAMIDE (PPA), 25 % GLASS FIBER REINFORCED MOLDING COMPOUND
• FORD ESF-M4D405-B-1992 POLYETHYLENE TEREPHTHALATE (PET), 45 % GLASS FIBER REINFORCED MOLDING COMPOUND
• FORD WSK-M4D855-A-1996 POLYPROPYLENE (PP) HOMOPOLYMER, 20 % MINERAL/GLASS FIBER FILLED/REINFORCED MOLDING COMPOUND
• FORD ESF-M3D56-A-2004 ALKYD MOLDING COMPOUND, GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD ESF-M3D64-A-2004 PHENOLIC MOLDING COMPOUND - GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSK-M4D748-A-1990 ACETAL (POM) COPOLYMER, MOLDING COMPOUND, EXTERIOR
• FORD WSK-M4D850-A-2006 POLYAMIDE 66 (PA66), 60 % GLASS FIBER REINFORCED MOLDING COMPOUND (Use WSB-M4D680-A: 11/11/2005)
• FORD ESB-M4G202-A-1978 FILLER, POLYESTER - TWO COMPONENT, FOR FRP SEAMS
• FORD ESB-M99J331-A-2000 MOLDED COATING FOR COMPRESSION MOLDED FRP - ONE COMPONENT
• FORD ESB-M4D299-A-2011 POLYPROPYLENE, GLASS FIBER REINFORCED INJECTION MOLDING COMPOUND - NATURAL ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD ESF-M3D155-A-2004 PHENOLIC (PF) MOLDING COMPOUND, GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD ESF-M4D405-C3-1992 POLYETHYLENE TEREPHTHALATE (PET), 30 % GLASS FIBER REINFORCED, HIGH MELT FLOW RATE MOLDING COMPOUND
• FORD WSF-M4D774-A-2006 POLYETHERSULFONE (PESU), 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSS-M4D823-B1-2015 POLYAMIDE (PA) 66, HEAT STABILIZED 40% GLASS FIBER/MINERAL (25% GLASS/ 15% MINERAL) REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD ESK-M3D151-A-2005 PHENOLIC MOLDING COMPOUND 40% E-GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSB-M4D677-A-2005 POLYAMIDE (PA) 66, 30% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSB-M4D918-A-2006 POLYPHENYLENE SULFIDE (PPS), 33 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSL-M4D807-A-2006 POLYPHENYLENE SULFIDE (PPS), 40% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSS-M4D309-C-2009 POLYCARBONATE (PC), 10% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD ESK-M3D150-A-2005 PHENOLIC INJECTION MOLDING COMPOUND, 43% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD SK-M3D9575-B-2005 UNSATURATED POLYESTER SHEET MOLDING COMPOUND, 25% GLASS FIBRE REINFORCED *** TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSB-M4D634-A-2005 POLYPHENYLENE ETHER (PPE), MODIFIED MOLDING COMPOUND, 16% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSB-M4D732-A3-2005 POLYPROPYLENE (PP) HOMOPOLYMER, 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSB-M4D884-A1-2006 POLYPROPYLENE (PP) COPOLYMER, 5% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSK-M3D176-A1-2005 PHENOLIC (PF) 35% GLASS FIBER REINFORCED, COMPRESSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSK-M3D176-A2-2005 PHENOLIC (PF) 30% GLASS FIBER REINFORCED COMPRESSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSF-M4D803-A2-2006 POLYPHENYLENE SULFIDE (PPS), 65% GLASS FIBER/ MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSS-M4D992-A-2005 POLYAMIDE (PA) MXD6 55% GLASS FIBER AND MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSS-M3D177-A1-2005 UNSATURATED POLYESTER (UP), 50% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD ESF-M4D436-A2-2010 POLYETHERIMIDE, 20% GLASS FIBER REINFORCED - INJECTION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD ESA-M4D568-A-2005 THERMOPLASTIC POLYURETHANE (TPU) MOLDING COMPOUND, 40% LONG GLASS FIBER FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSA-M3D164-A-2004 UNSATURATED POLYESTER (UP), MODIFIED, 50% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND (SMC) ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSB-M4D865-A-2006 POLYPROPYLENE (PP) HOMOPOLYMER, 40 % LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSB-M4D865-A2-2006 POLYPROPYLENE (PP) HOMOPOLYMER, 50% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSB-M3D169-A-2004 UNSATURATED POLYESTER (UP), 22% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSB-M3D171-A1-2006 UNSATURATED POLYESTER (UP) INJECTION MOLDING COMPOUND, 8% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSB-M3D173-A1-2006 UNSATURATED POLYESTER (UP) 40% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND *** TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSB-M3D173-A2-2004 UNSATURATED POLYESTER (UP) 40% GLASS FIBER, REINFORCED SHEET MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSB-M3D174-A-2004 UNSATURATED POLYESTER (UP), 60% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSK-M4D808-A-2006 POLYPHENYLENE SULFIDE (PPS), 45% GLASS FIBER REINFORCED, SELF EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSK-M4D829-A-2006 POLYAMIDE 12 (PA12), HEAT STABILIZED, 30% GLASS FIBER REINFORCED MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A **
• FORD WSS-M3D170-A2-2005 UNSATURATED POLYESTER (UP), 30% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSB-M4D854-A1-2010 POLYPROPYLENE (PP), 30% GLASS FIBER REINFORCED REMANUFACTURED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSP-M4D843-A-2010 POLYPHTHALAMIDE (PPA), 34% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSK-M4D715-A2-2010 POLYAMIDE (PA) 46, HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD ESB-M3D105-B-2004 POLYESTER RESIN, GLASS FIBER REINFORCED MATCHED METAL DIE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD ESB-M3D105-C-2004 POLYESTER RESIN, GLASS FIBER REINFORCED MATCHED METAL DIE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD ESB-M4D404-A-1990 THERMOPLASTIC POLYOLEFIN, ELASTOMER AND GLASS FIBER MODIFIED, MOLDING COMPOUND, INTERIOR GRADE, COLOR PIGMENTED, UV STABILIZED
• FORD ESH-M4D560-A-2005 POLYPROPYLENE (PP) INJECTION MOLDING COMPOUND, 36% GLASS FIBER AND MICA FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSA-M3D173-A3-2005 VINYL ESTER (VE), MODIFIED, 35% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSK-M3D162-A-2004 PHENOLIC (PF) COMPRESSION MOLDING COMPOUND 50% MINERAL/GLASS FIBER FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSK-M4D665-A2-2005 POLYAMIDE (PA) 6, 15% GLASS FIBER REINFORCED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSK-M4D807-A2-2006 POLYPHENYLENE SULFIDE (PPS), 40 % GLASS FIBER REINFORCED, SELF-EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD ESH-M4D560-A-2010 POLYPROPYLENE (PP) INJECTION MOLDING COMPOUND, 36% GLASS FIBER AND MICA FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSK-M4D773-A2-2010 POLYARYLSULFONE (PAS), HEAT STABILIZED, 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSS-M4D822-A2-2014 POLYAMIDE 6 (PA6), HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD ESF-M3D121-A1-2004 UNSATURATED POLYESTER (UP), GLASS FIBER REINFORCED, BULK MOLDING COMPOUND (BMC) ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSS-M3D173-A4-2004 UNSATURATED POLYESTER (UP), MODIFIED, 40% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSS-M3D185-A-2003 UNSATURATED POLYESTER (UP), MODIFIED, 35% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSS-M3D186-A-2005 UNSATURATED POLYESTER (UP), 30% GLASS FIBER REINFORCED CONDUCTIVE SHEET MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSB-M4D735-A-2010 THERMOPLASTIC POLYURETHANE ELASTOMER (TPU), 15% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSK-M4D597-A-2010 POLYETHYLENE TEREPHTHALATE (PET) 55 % GLASS FIBRE REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSF-M4D629-A-2010 POLYETHYLENE TEREPHTHALATE (PET) MOLDING COMPOUND, 15% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSF-M4D897-A-2010 POLYAMIDE 46 (PA46), HEAT STABILIZED 50% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSS-M4D940-A1-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 40% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD ESB-M4D330-A6-1990 IONOMER MOLDING COMPOUND, ZINC/SODIUM TYPE - GLASS FIBER MODIFIED - BLACK - EXTERIOR GRADE Shown on ESB-M4D330-A1
• FORD ESL-M3D128-A1-2004 PHENOLIC (PF), GLASS FIBER AND MINERAL REINFORCED COMPRESSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSB-M4D922-A-2006 POLYCARBONATE (PC), 10% GLASS FIBER REINFORCED, POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSB-M4D607-A2-2005 POLYBUTYLENE TEREPHTHALATE (PBT), 30 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSK-M3D176-A3-2005 PHENOLIC (PF) 30% GLASS FIBER REINFORCED PRE-PREG SHEET MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSK-M4D719-A-2006 POLYAMIDE (PA) 66, 38% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** (Use WSK-M4D823-A)
• FORD WSF-M3D165-A-2006 UNSATURATED POLYESTER (UP), 12% GLASS FIBER REINFORCED, HIGH HEAT RESISTANT COMPRESSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSF-M3D166-A-2004 UNSATURATED POLYESTER (UP), 15% GLASS FIBER REINFORCED, HIGH HEAT RESISTANT COMPRESSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSK-M3D154-A-2004 UNSATURATED POLYESTER (UP) INJECTION MOLDING COMPOUND, 17% GLASS FIBER REINFORCED, HIGH HEAT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSS-M4D823-A2-2006 POLYAMIDE 66 (PA66), HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSS-M3D178-A1-2005 UNSATURATED POLYESTER (UP) INJECTION MOLDING COMPOUND, 14% GLASS FIBER REINFORCED, LOW PROFILE ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSK-M4D750-A-2009 POLYBUTYLENE TEREPHTHALATE (PBT), 15% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSF-M4D737-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT), 30 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSK-M4D749-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT), 10% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***

PL-PKN, fiberglass rod composition

• PN P04847-11-1987 Method for quantitative analysis in binary fibre mixtures of glass fibre

GM Global, fiberglass rod composition

• GMW 16900-2013 Polypropylene, Long Glass Fiber Reinforced, Compression Molded Issue 1; English
• GMW 16901-2013 Polypropylene, Glass Fiber Fabric Reinforced, Compression Molded Issue 1; English

International Electrotechnical Commission (IEC), fiberglass rod composition

• IEC PAS 61249-6-3:2011 Specification for finished fabric woven from "E"-glass for printed boards
• IEC 61067-2:1992 Specification for glass and glass polyester fibre woven tapes; part 2: methods of test
• IEC 61067-3-1:1995 Glass and glass polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Type 1, 2 and 3 tapes
• IEC 60454-3-8:2006 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8 - Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre
• IEC 60819-3-1:2001 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials; Sheet 1: Filled glass paper

未注明发布机构, fiberglass rod composition

• SAE AMS3670/4C-2000 Polyamide-Imide Bar, Rod, and Shapes 30% Glass Fiber

AENOR, fiberglass rod composition

• ESPECIFICACION UNE 0059:2017 Fiberglass reinforced polyester poles for overhead power distribution lines and telephony lines
• UNE 83516:2015 Fibre reinforced concrete. Fibres for concrete. Alkali resistant glass fibres. Definitions, classification and specifications.
• UNE-EN 61067-2:1998 SPECIFICATION FOR GLASS AND GLASS POLYESTER FIBRE WOVEN TAPES. PART 2: METHODS OF TEST.
• UNE-EN 61067-1:1998 SPECIFICATION FOR GLASS AND GLASS POLYESTER FIBRE WOVEN TAPES. PART 1: DEFINITIONS, CLASSIFICATION AND GENERAL REQUIREMENTS.
• UNE-EN 15191:2011 Precast concrete products - Classification of glassfibre reinforced concrete performance
• UNE 53956:2002 IN Plastics. Buried installation of prefabricated swimming pools made from fiber glass reinforced plastics (GRP).
• UNE-EN 12971-1:2000 Reinforcements - Specification for textile glass chopped strands - Part 1: Designation
• UNE 53955:2002 EX Plastics. Prefabricated swimming pools made from fiber glass reinforced plastics (GRP). Characteristics ant test methods.
• UNE-EN 61067-3-1:1996 GLASS AND GLASS POLYESTER FIBRE WOVEN TAPES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 1: TYPE 1, 2 AND 3 TAPES.
• UNE-EN 12971-3:2000 Reinforcements - Specification for textile glass chopped strands - Part 3: Specific requirements

IN-BIS, fiberglass rod composition

• IS 10192-1982
• IS 4685 Pt.1-1968
• IS 12866-1989
• IS 4685 Pt.2-1984

Professional Standard-Ships, fiberglass rod composition

• CB/T 180-1998 Technology of marine GFRP products hand lay up method
• CB 180-1998 Hand lay-up molding process of marine fiberglass reinforced plastic products

Professional Standard - Machinery, fiberglass rod composition

• JB/T 10322.3-2002 Resin impregnated glass fibre meshes for electrical purposes Part 3:Specification for individual types of meshes epoxide resin impregnated glass fibre meshes
• JB/T 56073.15-1999 Quality grading of silicone rubber fiberglass hose products
• JB/T 56073.14-1999 Quality classification of acrylic fiberglass hose products
• JB/T 56036-1999 Quality grading of PVC fiberglass hose products
• JB/T 10322.2-2002 Resin impregnated glass fibre meshes for electrical purposes Part 2:Test methods
• JB/T 10322.1-2002 Resin impregnated glass fibre meshes for electrical purposes Part 1:Definitions and general requirements

Danish Standards Foundation, fiberglass rod composition

• DS/EN 61067-2:1998 Specification for glass and glass polyester fibre woven tapes - Part 2: Methods of test
• DS/EN 61067-1:1998 Specification for glass and glass polyester fibre woven tapes - Part 1: Definitions, classification and general requirements
• DS/EN 2833-005:2013 Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate
• DS/EN 15191:2010 Precast concrete products - Classification of glassfibre reinforced concrete performance
• DS/EN 12971-1:1999 Reinforcements - Specification for textile glass chopped strands - Part 1: Designation
• DS/EN 61067-3-1:1996 Glass and glass polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Type 1, 2 and 3 tapes
• DS/EN 1170-3:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC
• DS/EN 12971-3:1999 Reinforcements - Specification for textile glass chopped strands - Part 3: Specific requirements
• DS/EN 1170-8:2008 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test
• DS/EN 13280:2001 Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water
• DS/EN 60819-3-1:2002 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Filled glasspaper
• DS/EN 1170-2:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC, ""Wash out test""

Group Standards of the People's Republic of China, fiberglass rod composition

• T/ZZB 3059-2023 Three-piece direct roving winder for glass fiber
• T/CECS 561-2018 Technical specification for extruded glass-fiber reinforced cement panel curtain wall engineering
• T/HNSXHJJYJH 001-2020 Integrated Septic Tanks I Glass Fiber Reinforced Polyethylene by Blow Molding

Professional Standard - Post and Telecommunication, fiberglass rod composition

• YD/T 1181.1-2002 Characteristics of Non-metal Reinforcement Used for Optical Cable Part1: Glass Fiber Reinforced Plastic Rods

ES-AENOR, fiberglass rod composition

• UNE 43-509-1985
• UNE 92-102-1989

European Committee for Standardization (CEN), fiberglass rod composition

• EN 1170-3:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC
• EN 12971-3:1999 Reinforcements - Specification for textile glass chopped strands - Part 3: Specific requirements
• EN 637:1994 Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method
• EN 14020-1:2002 Reinforcements - Specification for textile glass rovings - Part 1: Designation
• EN 2330:1993 Aerospace series; textile glass fibre preimpregnates; test method for the determination of the content of volatile matter
• EN 15191:2009 Precast concrete products - Classification of glassfibre reinforced concrete performance
• EN 1170-2:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC, "Wash out test"
• EN 14020-3:2002 Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements
• EN 12654-1:1998 Textile glass - Yarns - Part 1: Designation
• EN 14118-3:2003 Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements
• EN 1170-8:2008 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test
• prEN 61067-3-1-1992 Specification for glass and glass polyester fibre woven tapes for electrical purposes; part 3: specifications for individual materials; sheet 1: specifications for type 1, 2 and 3 tapes
• EN ISO 14692-3:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design
• CEN EN 13280-2001 Specification for Glass Fibre Reinforced Cisterns of One-Piece and Sectional Construction, for the Storage, Above Ground, of Cold Water
• DD ENV 1170-8-1996 Test Method for Glass-Fibre Reinforced Cement - Part 8: Cyclic Weathering Type Test
• EN ISO 14692-2:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture
• EN 14020-2:2002 Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements
• EN 12654-3:1998 Textile glass - Yarns - Part 3: General requirements for general applications
• EN 12971-2:1999 Reinforcements - Specification for textile glass chopped strands - Part 2: Test methods and general requirements

American Water Works Association (AWWA), fiberglass rod composition

• AWWA F101-2013 Contact-Molded, Fiberglass- Reinforced Plastic Wash-Water Troughs and Launders
• AWWA F102-2007 Matched-Die-Molded, Fiberglass-Reinforced Plastic Weir Plates, Scum Baffles, and Mounting Brackets
• ANSI/AWWA F102-2007 Matched-Die Molded, Fiberglass Reinforced Plastic Weir Plates, Scum Baffles, and Mounting Brackets

SE-SIS, fiberglass rod composition

• SIS SS 22 40 71-1984 Textile glass - Determination of the average diameter of staple fibres or con- tinuous filaments constituting a textile glass yarn - Cross-section method
• SIS SS 22 41 39-1984 Textile glass - Mats (made from chopped or continuous strands) - Basis for a specification

European Association of Aerospace Industries, fiberglass rod composition

• AECMA PREN 2833-5-2001 Areospace series Glass Fibre Thermosetting Preimpregnates Technical Specification Part 5: Glass Fabric/Phenolic Resin Preimpregnate Edition P 1
• AECMA PREN 2850-1997 (Faulty Standard) Aerospace Series Carbon Fibre Thermosetting Resin Unidirectional Laminates Compression Test Parallel to Fibre Direction Edition P 2
• AECMA PREN 2850-1991 Aerospace Series Carbon Thermosetting Resin Unidirectional Laminates Compression Test Parallel to the Fibre Direction Issue P 1
• AECMA PREN 2833-2-1993 Aerospace Series Technical Specification Glass Fibre Thermosetting Preimpregnates Part 2: Glass Fabric/Epoxy Resin Preimpregnates Curing at 125 Degrees Celsius for Continuous Use up to 80 Degrees Celsius Issue 3
• AECMA PREN 2833-3-1997 Aerospace Series Glass Fibre Thermosetting Preimpregnates Techical Specification Part 3: Glass Fabric/Epoxy Resin Preimpregnate Curing at up to 180 Degrees C for Continuous Use up to 120 Degrees C Edition P 1
• AECMA PREN 2833-2-1995 Aerospace Series Glass Fibre Thermosetting Preimpregnates Technical Specification Part 2: Glass Fabric/Epoxy Resin Preimpregnates Curing at up to 125 Degrees Celsius for Continuous Use up to 80 Degrees Celsius Edition P 1
• AECMA PREN 2833-3-1995 Aerospace Series Glass Fibre Thermosetting Preimpregnates Techical Specification Part 3: Glass Fabric/Epoxy Resin Preimpregnate Curing at up to 180 Degrees Celsius for Continuous Use up to 120 Degrees Celsius Issue 3
• AECMA PREN 2833-1-1997 Aerospace Series Glass Fibre Thermosetting Preimpregnates Technical Specification Part 1 : General Requirements Edition P 2
• AECMA PREN 2833-1-1994 Aerospace Series Glass Fibre Thermosetting Preimpregnates Technical Specification Part 1 : General Edition P 1

BE-NBN, fiberglass rod composition

• NBN S 22-009-1985 Textile glass - Mats (made from chopped or continuous strands)- Basis for a specification
• NBN EN 637-1994 Plastics piping systems. Glass-reinforced plastics components. Determination of the amounts of constituents using the gravimetric method
• NBN S 22-014-1985 Textile glass chopped-strand mats for reinforcernent of plastics - Determination of time of dissolution of the binder in styrene

European Committee for Electrotechnical Standardization（CENELEC）, fiberglass rod composition

• EN 61067-2:1997 Specification for Glass and Glass Polyester Fibre Woven Tapes Part 2: Methods of Test
• EN 61067-1:1997 Specification for Glass and Glass Polyester Fibre Woven Tapes Part 1: Definitions, Classification and General Requirements
• EN 60819-3-1:2001 Non-Cellulosic Papers for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 1: Filled Glass Paper
• EN 61067-3-1:1995 Glass and Glass Polyester Fibre Woven Tapes Part 3: Specifications for Individual Materials Sheet 1: Type 1, 2 and 3 Tapes

Lithuanian Standards Office , fiberglass rod composition

• LST EN 61067-2-2001 Specification for glass and glass polyester fibre woven tapes. Part 2: Methods of test (IEC 61067-2:1992)
• LST EN 15191-2010 Precast concrete products - Classification of glassfibre reinforced concrete performance
• LST EN 61067-1-2001 Specification for glass and glass polyester fibre woven tapes. Part 1: Definitions, classification and general requirements (IEC 61067-1:1991)
• LST EN 12971-1-2001 Reinforcements - Specification for textile glass chopped strands - Part 1: Designation
• LST EN 1170-3-2002 Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC
• LST EN 12971-3-2001 Reinforcements - Specification for textile glass chopped strands - Part 3: Specific requirements
• LST EN 1170-8-2009 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test
• LST EN 61067-3-1-2001 Glass and glass polyester fibre woven tapes. Part 3: Specifications for individual materials. Sheet 1: Type 1, 2 and 3 tapes (IEC 61067-3-1:1995)
• LST EN 13280-2002 Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water
• LST EN 1170-2-2002 Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC, "Wash out test"

农业农村部, fiberglass rod composition

• SC/T 8154-2018 Technical requirements for vacuum introduction molding process of glass fiber reinforced plastic fishing boats

VN-TCVN, fiberglass rod composition

• TCVN 7739-5-2007 Glass Fibers-Test Methods.Part 5: Determination of twist
• TCVN 7739-1-2007 Glass Fibers-Test Methods .Part 1: Determination of moisture content
• TCVN 7739-2-2007 Glass Fibers-Test Methods .Part 2: Determination of linear density
• TCVN 7739-4-2007 Glass Fibers-Test Methods .Part 4: Determination of average diameter
• TCVN 7739-3-2007 Glass Fibers-Test Methods.Part 3: Determination of combustible content
• TCVN 7739-6-2007 Glass Fibers.Test Methods .Part 6: Determination of breaking force and breaking elonggation

Aerospace, Security and Defence Industries Association of Europe (ASD), fiberglass rod composition

• ASD-STAN PREN 2833-5-2001 Areospace series Glass Fibre Thermosetting Preimpregnates Technical Specification Part 5: Glass Fabric/Phenolic Resin Preimpregnate (Edition P 1)
• ASD-STAN PREN 2833-1-1997 Aerospace Series Glass Fibre Thermosetting Preimpregnates Technical Specification Part 1 : General Requirements (Edition P 2)
• ASD-STAN PREN 2332-1983 Test Method for the Determination of the Resin Flow of Woven Textile Glass Fibre Fabric Preimpregnate Aerospace Series (Edition 1)
• ASD-STAN PREN 2330-1983 Test Method for the Determination of the Percentage of Volatile Matter in Woven Textile Glass Fibre Fabric Preimpregnate Aerospace Series (Edition 1)
• ASD-STAN PREN 2331-1983 Test Methods for the Determination of the Resin Content of Woven Textile Glass Fibre Fabric Preimpregnate Aerospace Series (Edition 1)

CH-SNV, fiberglass rod composition

• SN 237 250-1984 Anodizing of aluminium and its alloysGeneral directives and technical specifications

AT-ON, fiberglass rod composition

• ONORM C 9720 Teil.3-1981 Reinforced plastics; Laminates of glass fibre reinforced reaction moulding materials; Designation
• ONORM B 3651 Teil.1-1988 Roll roofings and waterproojing sheets consisting of bitumen and glass fibre (fleece) base materials; requirements, marking of conformity

PT-IPQ, fiberglass rod composition

• NP EN 1170-3-2000 Precast concrete products Test method for glass-fibre reinforced cement Part3:Measuring the fibre content of sprayed GRC
• NP ENV 1170-8-2000 Test method for glass-fibre reinforced cement Part 8:Cyclic weathering type test

Professional Standard - Traffic, fiberglass rod composition

• JT/T 599.1-2004 The glass-fiber-reinforced thermosetting-resin product for highway Part 1: General rule
• JT/T 599.2-2004 The glass-fiber-reinforced thermosetting-resin product for highway Part 2: Trunk
• JT/T 599.3-2004 The glass-fiber-reinforced thermosetting-resin product for highway Part 3: Duct
• JT/T 599.4-2004 The glass-fiber-reinforced thermosetting-resin product for highway Part 4: Anti-glare board

American Society of Mechanical Engineers (ASME), fiberglass rod composition

• ASME N-155-2-2001 Fiberglass Reinforced Thermosetting Resin Pipe Section III, Division 1

The American Road & Transportation Builders Association, fiberglass rod composition

• AASHTO GFRP-2009 AASHTO LRFD Bridge Design Guide Specifications for GFRP-Reinforced Concrete Bridge Decks and Traffic Railings (Revision 1; Includes Errata: July 2013)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, fiberglass rod composition

• PREN 2833-5-2001 Areospace series Glass Fibre Thermosetting Preimpregnates Technical Specification Part 5: Glass Fabric/Phenolic Resin Preimpregnate (Edition P 1)

Professional Standard - Electricity, fiberglass rod composition

• DL/T 802.2-2017 Technical requirements for electric cable conduits.Part 2:Cable conduits of fiberglass reinforced plastics
• DL/T 802.2-2007 Technical requirements for electric cable conduits.Part 2:Cable conduits of fiberglass reinforced plastics

GOSTR, fiberglass rod composition

• GOST R 57949-2017 Fiberglass-reinforced thermosetting plastic pipes and parts of pipelines. Methods for regression analysis
• GOST R 57883-2017 Glassfiber reinforced thermosetting pipes and parts of pipelines. Method for determination of the amounts of constituents

国家药监局, fiberglass rod composition

• YY/T 1697-2020 Test method for determination of strength and curing time of synthetic water-activated polyurethane fiberglass orthopedic bandages

Professional Standard - Petroleum, fiberglass rod composition

• SY/T 6770.1-2010 Quality acceptance code of non-metalic pipe.Part 1:High-pressure fiberglass line pipe

NZ-SNZ, fiberglass rod composition

• AS/NZS 4256.3:1994 Plastic Roof and Wall Cladding Materials Part 3: Glass Fibre Reinforced Polyester (GRP)

RO-ASRO, fiberglass rod composition

• STAS SR ISO 7884-3:1996 Glass - Viscosity and viscometric fixed points - Part 3: Determination of viscosity by fibre elongation viscometer

KR-KS, fiberglass rod composition

• KS C IEC 60819-3-1-2021 Non-cellulosic papers for electrical purposes — Part 3: Specifications for individual materials — Sheet 1: Filled glass paper

ZA-SANS, fiberglass rod composition

• SANS 7491-3:1994 Glass fibre reinforced plastics cisterns for cold water storage Part 3: Specification for sectional tanks

Others:   Fiberglass Rod Preparation, Mesh Fiberglass Pole, How to Cut Fiberglass Pole, fiberglass rod strength, Fiberglass Rod Cutting, fiberglass rod composition, How to Cut Fiberglass Pole, How to cut fiberglass rod, Glass fiber composition ratio.