ZH
RU
ES

multifunctional material structure

multifunctional material structure, Total:186 items.

In the international standard classification, multifunctional material structure involves: Elements of buildings, Construction equipment, Industrial automation systems, Rubber, Printed circuits and boards, Construction materials, Tunnel construction, Insulating materials, Powder metallurgy, Insulation, Shipbuilding and marine structures in general, On-board equipment and instruments, Rotating machinery, Wood, sawlogs and sawn timber, Wood-based panels, Protection against fire, Telecommunication systems, Packaging materials and accessories, Structures of buildings, Fasteners, Rubber and plastics products, Earth-moving machinery, Reinforced plastics, Installations in buildings, Furniture, Cases. Boxes. Crates, Linear and angular measurements, Bearings, Products of the chemical industry, Sterilization and disinfection, Sacks. Bags.

Professional Standard - Construction Industry, multifunctional material structure

JG/T 176-2005 Function structure measurement of plastic window/door and profile
JG/T 176-2015 Functional structural dimensions of plastic doors, windows and profiles

Group Standards of the People's Republic of China, multifunctional material structure

T/CCMA 0132-2022 Code of practice for slipform construction of curb structures
T/CASME 61-2022 Structure and function requirements of automatic blanking and sorting system
T/CSTM 00789-2023 Tourmaline porous compound material with negative ion function in vehicle
T/CHTS 10060-2022 Technical Guideline for Application of Multifunctional Energy-Storage and Luminescent Materials in Highway Tunnels

German Institute for Standardization, multifunctional material structure

DIN 5514-5:1984 Materials for rail vehicles; elastomers; function group: profiles for the vehicle superstructures; specification groups
DIN 30910-3:2004-11 Sintered metal materials - Sintered-material specifications - Part 3: Materials for bearings and structural parts with bearing properties
DIN EN 61249-4-2:2006-03 Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability (IEC 61249-4-2:2005); German version EN 6124...
DIN EN 61249-4-16:2009 Materials for printed boards and other interconnecting structures - Part 4-16: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined
DIN EN 61249-4-15:2009 Materials for printed boards and other interconnecting structures - Part 4-15: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of defined flammability (ve
DIN EN 61249-4-17:2009 Materials for printed boards and other interconnecting structures - Part 4-17: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Non-halogenated epoxide woven E-glass prepreg of defined flammability (ve
DIN 30910-3:2004 Sintered metal materials - Sintered-material specifications - Part 3: Materials for bearings and structural parts with bearing properties
DIN EN 61249-4-12:2006-03 Materials for printed boards and other interconnecting structures - Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability (IEC 61249-4-12:2005); Germ...
DIN EN 300417-10-1:2004 Transmission and Multiplexing (TM) - Generic requirements of transport functionality of equipment - Part 10-1: Synchronous Digital Hierarchy (SDH) radio specific functionalities (Endorsement of the English version EN 300417-10-1 V1.1.1 (2003-11) as German
DIN ETS 300484:1997 Transmission and Multiplexing (TM) - Synchronous Digital Hierarchy (SDH) information model - Connection supervision function (Higher order Connection Supervision/Lower order Connection Supervision (HCS/LCS)) for the Network Element (NE) view; English vers
DIN EN ISO 13565-2:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996); German version EN ISO 13565-2:1997
DIN EN ISO 13565-3:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve (ISO 13565-3:1998); German version EN ISO 13565-3:2000
DIN EN 868-5:2019 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods
DIN EN 868-5:2019-03 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods; German version EN 868-5:2018

KR-KS, multifunctional material structure

KS C IEC 61249-4-2-2008 Materials for printed boards and other interconnecting structures－Part 4－2：Sectional specification set for prepreg materials, unclad－Multifunctional epoxide woven E-glass prepreg of defined flammabili
KS C IEC 61249-4-12-2008 Materials for printed boards and other interconnecting structures－Part 4－12：Sectional specification set for prepreg material, unclad－Non-halogenated multifunctional epoxide woven E-glass prepreg of de

International Electrotechnical Commission (IEC), multifunctional material structure

IEC TR3 60792-2:1993 The multi-factor functional testing of electrical insulation systems; part 2: bibliography
IEC TR 60792-1:1985 The multi-factor functional testing of electrical insulation systems. Part 1 : Test procedures
IEC 61249-4-15:2009 Materials for printed boards and other interconnecting structures - Part 4-15: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of defined flammability (ve
IEC 61249-4-16:2009 Materials for printed boards and other interconnecting structures - Part 4-16: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined
IEC 61249-4-17:2009 Materials for printed boards and other interconnecting structures - Part 4-17: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Non-halogenated epoxide woven E-glass prepreg of defined flammability (ve
IEC 60034-18-33:1995 Rotating electrical machines - Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor functional evaluation - Endurance under combined thermal and electrical stresses of insulation systems used in machines up t
IEC 61249-4-2:2005 Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability
IEC 61249-4-12:2005 Materials for printed boards and other interconnecting structures - Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
IEC TR2 60034-18-33:1995 Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 33: Test procedures for form-wound windings - Multifactor functional evaluation - Endurance under thermal and electrical stresses of insulation systems used in m
IEC 61249-4-14:2009 Materials for printed boards and other interconnecting structures - Part 4-14: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability (vertical burning t

工业和信息化部, multifunctional material structure

YS/T 1251-2018 Determination of fatigue properties of sintered metallic porous materials
YS/T 1538-2022 Determination of damping properties of sintered metal porous materials
YS/T 1132-2016 Determination of compression properties of sintered metallic porous materials
YS/T 1133-2016 Determination of tensile properties of sintered metallic porous materials
YS/T 1131-2016 Determination of bending resistance of sintered metallic porous materials
YS/T 1483-2021 Determination of sulfide corrosion properties of sintered metal porous materials

GM Europe, multifunctional material structure

GME QK 000501-1983 PUR-Elastomer mit Zellstruktur PUR-Elastomer with Cell Structure German
GME QK 000465-2003 PUR-Elastomer mit Zellstruktur PUR Elastomer with Cell Structure English/German
GME QK 000469-2003 PUR-Elastomer with Cell Structure (English/German)
GME QK 000516-1983 PUR-Elastomer mit Zellstruktur PUR-Elastomer with Cell Structure German
GME QK 000520-1983 PUR-Elastomer mit Zellstruktur PUR-Elastomer with Cell Structure German
GME QK 000465-2010
GME QK 000507-1983 PUR-Elastomer mit Zellstruktur PUR-Elastomer with Cell Structure German [Superseded: GME QK 000534]

British Standards Institution (BSI), multifunctional material structure

BS EN 61249-4-15:2009 Materials for printed boards and other interconnecting structures - Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of defined flammability (vertical burn
BS EN 61249-4-16:2009 Materials for printed boards and other interconnecting structures - Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammabilit
BS EN 61249-4-2:2005 Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional expoxide woven E-glass prepeg of defined flammability
BS EN 61249-4-12:2005 Materials for printed boards and other interconnecting structures - Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifuctional epoxide woven E-glass prepeg of defined flammability
BS 476-24:1987 Fire tests on building materials and structures. Method for determination of the fire resistance of ventilation ducts
BS EN ISO 13565-3:2000 Geometric Product Specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties. Height characterization using the material probability curve
23/30452585 DC BS EN ISO 7021 Earth-moving machinery and machinery for forestry. Operator protective structures. Material performance requirements
19/30388954 DC BS ISO 14484. Performance guidelines for design of concrete structures using fibre-reinforced polymer (FRP) materials
NA to BS EN 1993-1-10-2005 National Annex (informative) to Eurocode 3 - Design of steel structures - Part 1-10: Material toughness and through thickness properties
BS EN 61158-3-2:2014+A1:2019 Tracked Changes. Packaging for terminally sterilized medical devices. Sealable pouches and reels of porous materials and plastic film construction. Requirements and test methods

CZ-CSN, multifunctional material structure

CSN 73 0542-1977 Thermo-technical properties of engineer- ing sfcructuros and buildings. Propertie3 of materials and structures.

国家市场监督管理总局、中国国家标准化管理委员会, multifunctional material structure

GB/T 40528.1-2021 Requirements for structural dimensions of multi-hull yacht—Part 1:Composite material
GB/T 38359-2019 Data-analysis methods of strength properties for structural wood and wood-based products
GB/T 2889.1-2020 Plain bearings—Terms, definitions, classification and symbols—Part 1: Design, bearing materials and their properties

Korean Agency for Technology and Standards (KATS), multifunctional material structure

KS F 4032-1996 SEALING COMPOUNDS FOR SEALING, GLAZING AND CAULKING IN BUILDINGS
KS F 4032-1986 SEALING COMPOUNDS FOR SEALING, GLAZING AND CAULKING IN BUILDINGS
KS C IEC 61249-4-15:2011 Materials for printed boards and other interconnecting structures－Part 4-15：Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards)－Multifunctional epoxide woven E-glass prepreg of defined flammability (vertica
KS C IEC 61249-4-16:2011 Materials for printed boards and other interconnecting structures－Part 4-16：Sectional specification set for prepreg materials,unclad (for the manufacture of multilayer boards)－Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flamma
KS C IEC 61249-4-17:2011 Materials for printed boards and other interconnecting structures－Part 4-17：Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards)－Non-halogenated epoxide woven E-glass prepreg of defined flammability (vertica
KS C IEC 61249-4-2:2008 Materials for printed boards and other interconnecting structures-Part 4-2:Sectional specification set for prepreg materials, unclad-Multifunctional epoxide woven E-glass prepreg of defined flammability
KS C IEC 61249-4-2:2013 Materials for printed boards and other interconnecting structures－Part 4－2：Sectional specification set for prepreg materials, unclad－Multifunctional epoxide woven E-glass prepreg of defined flammability
KS F 2271-2006 Testing method for incombustibility of internal finish material and element of buildings
KS C IEC 61249-4-15-2011(2016) Materials for printed boards and other interconnecting structures－Part 4-15：Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards)－Multifunctional epoxide
KS T 1101-2020 Packaging — Regenerated cellulose film, flms made of plastics, aluminium foil, flexible multilayer structures and metallized matrials
KS C IEC 61249-4-12:2008 Materials for printed boards and other interconnecting structures-Part 4-12:Sectional specification set for prepreg material, unclad-Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
KS C IEC 61249-4-12:2013 Materials for printed boards and other interconnecting structures－Part 4－12：Sectional specification set for prepreg material, unclad－Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
KS C IEC 61249-4-15-2011(2021) Materials for printed boards and other interconnecting structures－Part 4-15：Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards)－Multifunctional epoxide
KS C IEC 61249-4-16-2011(2016) Materials for printed boards and other interconnecting structures－Part 4-16：Sectional specification set for prepreg materials,unclad (for the manufacture of multilayer boards)－Multifunctional non-halo
KS T 1101-2003 Packaging-Regenerated cellulose film, films made of plastics, aluminium foil, flexible multilayer structures and metallized materials
KS T 1101-2013 Packaging ― Regenerated cellulose film, flms made of plastics, aluminium foil,flexible multilayer structures and metallized
KS C IEC 61249-4-16-2011(2021) Materials for printed boards and other interconnecting structures－Part 4-16：Sectional specification set for prepreg materials,unclad (for the manufacture of multilayer boards)－Multifunctional non-halo
KS C IEC 61249-4-1-2012(2022) Materials for printed boards and other interconnecting structures－Part 4-1：Sectional specification set for prepreg materials, unclad(for the manufacture of multilayer boards)－Epoxide woven E-glass pre

ES-UNE, multifunctional material structure

UNE-EN 61249-4-2:2005 Materials for printed boards and other interconnecting structures -- Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability (Endorsed by AENOR in January of 2006.)
UNE-EN 61249-4-12:2005 Materials for printed boards and other interconnecting structures -- Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability (Endorsed by AENOR in Janu...
UNE-EN 61249-4-1:2008 Materials for interconnecting structures -- Part 4-1: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability. (Endorsed by AENOR in September of 2008.)
UNE-EN 868-5:2019 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, multifunctional material structure

GB/T 34643-2017 Sintered metal porous materials—Determination of air filter permeability

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, multifunctional material structure

GB/T 5594.8-1985 Test methods for properties of structure ceramic used in electronic components--Determination of microstructure
GB/T 32527-2016 Design specification of space materials science experimental facility.Multifunctional high temperature furnace
GB/T 17948.5-2007 Rotating electrical machines.Functional evaluation of insulation systems.Test procedures for form-wound windings.Multifactor functional evaluation.Endurance under combined thermal and electrical stresses of insulation systems used in machines up to and in
GB/T 5594.8-2015 Test methods for properties of structure ceramic used in electronic components and device.Part 8:Test method for microstructure
GB 5594.1-1985 Performance test methods for structural ceramic materials of electronic components Test methods for air tightness
GB/T 5594.1-1985 Test methods for properties of structure ceramic used in electronic components--Test method for gas-tightness
GB/T 5594.7-1985 Test methods for properties of structure ceramic used in electronic components--Test method for liquid permeability
GB/T 17948.5-2016 Rotating electrical machines.Functional evaluation of insulation systems.Test procedures for form-wound windings.Multifactor evaluation by endurance under simultaneous thermal and electrical stresses
GB/T 5594.6-1985 Test methods for properties of structure ceramic used in electronic components--Test method for chemical durability
GB 5594.5-1985 Test methods for performance of structural ceramic materials for electronic components Test methods for volume resistivity
GB/T 5594.5-1985 Test methods for properties of structure ceramic used in electronic components--Test method for volume resistivity
GB/T 5594.7-2015 Test methods for properties of structure ceramic used in electronic components and device.Part 7:Test method for liquid permeability
GB/T 5594.3-1985 Test methods for properties of structure ceramic used in electronic components--Test method for mean coefficient of linear expansion
GB/T 5594.6-2015 Test methods for properties of structure ceramics used in electronic component and device.Part 6:Test method for chemical durability
GB/T 5594.4-1985 Test methods for properties of structure ceramic used in electronic components--Test method for dielectric loss angle tangent value
GB 5594.2-1985 Test method for performance of structural ceramic materials for electronic components Test method for Young's modulus of elasticity and Poisson's ratio
GB/T 5594.2-1985 Test methods for properties of structure ceramic used in electronic components--Test method for Young's elastic modulus and Poisson ratio

American Society for Testing and Materials (ASTM), multifunctional material structure

ASTM D4761-05 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
ASTM D4761-02a Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
ASTM D4761-18 Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials
ASTM D4761-02 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
ASTM D4761-19 Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials
ASTM D4761-13 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
ASTM D7336/D7336M-12 Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
ASTM D7290-06(2022) Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications
ASTM D7290-06(2011) Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications
ASTM F1858-98 Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use
ASTM F1858-98(2004)e1 Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use
ASTM F1858-98(2008) Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use
ASTM D5639/D5639M-95(2000)e1 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements
ASTM D5639/D5639M-05 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements
ASTM D5639/D5639M-20 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements
ASTM D563-88(1996)e1 Standard practice for corrugated fiberboard materials and box construction based on performance requirements
ASTM D5639/D5639M-11(2015) Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements

Professional Standard - Aerospace, multifunctional material structure

QJ 1132-1987 Specifications for performance of metal materials for spacecraft, performance specifications for structural aluminum alloys

Association Francaise de Normalisation, multifunctional material structure

NF C93-780-4-2*NF EN 61249-4-2:2006 Materials for printed boards and other interconnecting structures - Part 4-2 : sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability
NF EN IEC 60947-6-1:2023 Appareillage à basse tension - Partie 6-1 : matériels à fonctions multiples - Equipement de transfert de source
NF EN 61249-4-12:2006 Matériaux pour circuits imprimés et autres structures d'interconnexion - Partie 4-12 : série de spécifications intermédiaires pour matériaux préimprégnés, non plaqués - Tissu de verre époxyde préimprégné multifonctionnel de type E non ha...
NF EN 61249-4-2:2006 Matériaux pour circuits imprimés et autres structures d'interconnexion - Partie 4-2 : série de spécifications intermédiaires pour matériaux préimprégnés, non plaqués Tissu de verre époxyde de type E préimprégné multifonctionnel d'inflam...
NF C93-780-4-12*NF EN 61249-4-12:2006 Materials for printed boards and other interconnecting structures - Part 4-12 : sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
NF C93-780-4-15*NF EN 61249-4-15:2014 Materials for printed boards and other interconnecting structures - Part 4-15 : sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of defined flammability (v
NF ISO 16028/A1:2006 Matériaux pour circuits imprimés et autres structures d'interconnexion - Partie 4-2 : série de spécifications intermédiaires pour matériaux préimprégnés, non plaqués Tissu de verre époxyde de type E préimprégné multifonctionnel d'inflammabilité définie
NF C93-780-4-16*NF EN 61249-4-16:2014 Materials for printed boards and other interconnecting structures - Part 4-16 : sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined
NF EN IEC 61189-2-501:2022 Méthodes d'essai pour les matériaux électriques, les cartes imprimées et autres structures d'interconnexion et ensembles - Partie 2-501 : méthodes d'essai des matériaux pour structures d'interconnexion - Mesure de la puissance élastique et d...
NF EN ISO 13426-1:2019 Géotextiles et produits apparentés - Résistance des liaisons de structures internes - Partie 1 : géosynthétiques alvéolaires
NF E05-023:2002 Geometrical Product Specification (GPS) - Surface texture : profile method - Surfaces having stratified functional properties - Part 3 : height characterization using the material probability curve.
NF T70-537:2009 Energetic materials for defence - Dossier defining the 120 mm diameter metallic structure model for solid propellant (propergol).
NF B43-106:1990 Ceramic matrix composites for thermostructural applications - Composites with continuous reinforcement 1D,2D,3D - Determination of tensile properties at high temperature
NF S98-051-5:2009 Packaging for terminally sterilized medical devices - Part 5 : sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods.
NF E05-022:1998 Geometrical Product Specifications (GPS) - Surface texture : profile method - Surfaces having stratified functional properties - Part 2 : height characterization using the linear material ratio curve.
NF S98-051-5*NF EN 868-5:2018 Packaging for terminally sterilized medical devices - Part 5 : sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods

Danish Standards Foundation, multifunctional material structure

DS/EN 61249-4-2:2006 Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability
DS/EN 61249-4-15:2009 Materials for printed boards and other interconnecting structures - Part 4-15: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of defined flammability (ve
DS/EN 61249-4-16:2009 Materials for printed boards and other interconnecting structures - Part 4-16: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined
DS/EN 61249-4-12:2006 Materials for printed boards and other interconnecting structures - Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
DS/EN 868-5:2009 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods

(U.S.) Ford Automotive Standards, multifunctional material structure

FORD FLTM EU-BV 060-01-2000 DETERMINATION OF STRUCTURE BORNE NOISE DAMPING BY SOUND DEADENING MATERIALS
FORD WSS-M99P35-A-2002 STRUCTURAL FOAM PERFORMANCE, CAVITY REINFORCING, TWO COMPONENT PUMPABLE, ROOM TEMPERATURE CURING

American Concrete Institute, multifunctional material structure

ACI SP-143-1994 New Experimental Techniques for Evaluating Concrete Material and Structural Performance

Lithuanian Standards Office , multifunctional material structure

LST EN 61249-4-16-2009 Materials for printed boards and other interconnecting structures - Part 4-16: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined
LST EN 61249-4-15-2009 Materials for printed boards and other interconnecting structures - Part 4-15: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of defined flammability (ve
LST EN 61249-4-2-2005 Materials for printed boards and other interconnecting structures. Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability (IEC 61249-4-2:2005)
LST EN 61249-4-12-2005 Materials for printed boards and other interconnecting structures. Part 4-12: Sectional specification set for prepreg materials, unclad. Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability (IEC 61249-4-12:2005)
LST EN 61249-4-18-2014 Materials for printed boards and other interconnecting structures -- Part 4-18: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance epoxide woven E-glass prepreg of defined flammability (
LST EN 61249-4-19-2014 Materials for printed boards and other interconnecting structures -- Part 4-19: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance non-halogenated epoxide woven E-glass prepreg of define
LST EN 868-5-2009 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods

European Committee for Electrotechnical Standardization（CENELEC）, multifunctional material structure

EN 61249-4-15:2009 Materials for printed boards and other interconnecting structures - Part 4-15: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of defined flammability (ve
EN 61249-4-12:2005 Materials for printed boards and other interconnecting structures Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
EN 61249-4-16:2009 Materials for printed boards and other interconnecting structures - Part 4-16: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined
EN 61249-4-2:2005 Materials for printed boards and other interconnecting structures Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability

NZ-SNZ, multifunctional material structure

MP 9 Supp.3-1989 FIRE PROPERTIES OF BUILDING MATERIALS AND ELEMENTS OF STRUCTURE SUPPLEMENT No.3
MP 9 Supp.2-1989 FIRE PROPERTIES OF BUILDING MATERIALS AND ELEMENTS OF STRUCTURE SUPPLEMENT No.2
MP 9 Supp.5-1989 FIRE PROPERTIES OF BUILDING MATERIALS AND ELEMENTS OF STRUCTURE SUPPLEMENT No.5

未注明发布机构, multifunctional material structure

BS 476-23:1987(2011) Fire tests on building materials and structures — Part 23 : Methods for determination of the contribution of components to the fire resistance of a structure
BS 1133-21:1991(1999) Packaging code — Section 21 : Regenerated cellulose film, films made of plastics, aluminium foil, flexible multilayer structures and metallized materials
BS 1902-3.1:1981(2011) Methods of testing Refractory materials — Part 3 : General and textural properties — Section 3.1 Guidance on sampling
BS 1902-3.14:1996(2011) Methods of testing Refractory materials — Part 3 : General and textural properties — Section 3.14 Determination of hydration tendency

Professional Standard - Forestry, multifunctional material structure

LY/T 2377-2014 Test methods for the joint performance with dowel type fasteners used in wooden structural material

Aerospace Industries Association/ANSI Aerospace Standards, multifunctional material structure

AIA/NAS NASM20604-1998 Rivet, Blind, Nonstructural, Universal Head, Class 1

BELST, multifunctional material structure

STB 2495-2017 Non-destructive testing. Determination of physical and mechanical properties of structural materials by indentation methods

Society of Automotive Engineers (SAE), multifunctional material structure

SAE ARP6337-2020 Design, Manufacturing, and Performance Standard for Composite Materials Used on Aircraft Seat Structures

ACI - American Concrete Institute, multifunctional material structure

ACI SP-253 CD-2008 Fifth ACI/CANMET/IBRACON Int'l Conference on High-Performance Concrete Structures & Materials

European Telecommunications Standards Institute (ETSI), multifunctional material structure

ETSI TS 102 292-2004 Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia (BSM) services and architectures; Functional architecture for IP interworking with BSM networks V1.1.1
ETSI TS 102 294-2004 Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia (BSM) services and architectures; IP Interworking via satellite; Multicast functional architecture (V1.1.1)
ETSI ES 282 007-2008 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); IP Multimedia Subsystem (IMS); Functional architecture (V2.1.1)
ETSI TS 123 246-2016 Universal Mobile Telecommunications System (UMTS); LTE; Multimedia Broadcast/Multicast Service (MBMS); Architecture and functional description (V13.3.0; 3GPP TS 23.246 version 13.3.0 Release 13)

GOSTR, multifunctional material structure

GOST R 58459-2019 Timber structures. Determination of the normative and calculated values of the mechanical properties of wood and materials based on it
GOST R 56680-2015 Polymer composites. Determination facing’s mechanical flexural properties of sandwich construction by long beam flexure method

International Organization for Standardization (ISO), multifunctional material structure

ISO/FDIS 7021:2023 Earth-moving machinery and machinery for forestry — Operator protective structures — Material performance requirements
ISO 7021:2023 Earth-moving machinery and machinery for forestry — Operator protective structures — Material performance requirements
ISO/DIS 7021 Earth-moving machinery and machinery for forestry — Operator protective structures — Material performance requirements
ISO 14484:2020 Performance guidelines for design of concrete structures using fibre-reinforced polymer (FRP) materials
ISO 14484:2013 Performance guidelines for design of concrete structures using fibre-reinforced polymer (FRP) materials
ISO 13565-3:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve
ISO/TR 15655:2020 Fire resistance — Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design

SE-SIS, multifunctional material structure

SIS SS-EN 301-1992 Adhesives, phenolic and aminoplastic, for loadbearing timber structures: Classification andperformance requirements

ETSI - European Telecommunications Standards Institute, multifunctional material structure

GR NFV-IFA 028-2018 Network Functions Virtualisation (NFV) Release 3; Management and Orchestration; Report on architecture options to support multiple administrative domains (V3.1.1)

European Committee for Standardization (CEN), multifunctional material structure

EN ISO 13565-2:1997 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Surfaces Having Stratified Functional Properties - Part 2: Height Characterization Using the Linear Material Ratio Curve
EN 868-5:2009 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods

Japanese Industrial Standards Committee (JISC), multifunctional material structure

JIS B 0671-3:2002 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 3: Height characterization using the material probability curve
JIS B 0671-2:2002 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 2: Height characterization using the linear material ratio curve

CEN - European Committee for Standardization, multifunctional material structure

EN 868-5:2018 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods

AENOR, multifunctional material structure

UNE-EN 868-5:2009 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods

AT-ON, multifunctional material structure

ONORM E 6517-1997 Electrical installation material - Rigid and pliable multi-walled cable protecting conduits with coupler, of PE-HD, with structured wall and smooth pipe inside, normal Performance