ZH
RU
ES

split beam microscopy

split beam microscopy, Total:497 items.

In the international standard classification, split beam microscopy involves: Vocabularies, Optical equipment, Air quality, Analytical chemistry, Electrical wires and cables, Fuels, Surface treatment and coating, Non-ferrous metals, Linear and angular measurements, Particle size analysis. Sieving, Coals, Fluid power systems, Microbiology, Medical equipment, Education, Physics. Chemistry, Optics and optical measurements, Electrical equipment for working in special conditions, Optoelectronics. Laser equipment, Textile fibres, Products of the textile industry, Paper and board, Corrosion of metals, Animal feeding stuffs, Products of the chemical industry, Pulps, Construction materials, Testing of metals, Test conditions and procedures in general, Electronic display devices, Production of metals, Nuclear energy engineering, Medical sciences and health care facilities in general, Protection against crime, Inorganic chemicals, Wood technology processes, Lubricants, industrial oils and related products, Organic chemicals, Glass, Plastics, Protection against dangerous goods.

International Organization for Standardization (ISO), split beam microscopy

ISO 22493:2008 Microbeam analysis - Scanning electron microscopy - Vocabulary
ISO 15932:2013 Microbeam analysis.Analytical electron microscopy.Vocabulary
ISO/TS 21383:2021 Microbeam analysis - Scanning electron microscopy - Qualification of the scanning electron microscope for quantitative measurements
ISO/TS 24597:2011 Microbeam analysis - Scanning electron microscopy - Methods of evaluating image sharpness
ISO/CD 19214:2023 Microbeam analysis — Analytical electron microscopy — Method of determination for apparent growth direction of wirelike crystals by transmission electron microscopy
ISO 25498:2010 Microbeam analysis - Analytical electron microscopy - Selected-area electron diffraction analysis using a transmission electron microscope
ISO 25498:2018 Microbeam analysis - Analytical electron microscopy - Selected area electron diffraction analysis using a transmission electron microscope
ISO 19056-3:2022 Microscopes — Definition and measurement of illumination properties — Part 3: Incident light fluorescence microscopy with incoherent light sources
ISO 23420:2021 Microbeam analysis — Analytical electron microscopy — Method for the determination of energy resolution for electron energy loss spectrum analysis
ISO 19214:2017 Microbeam analysis - Analytical electron microscopy - Method of determination for apparent growth direction of wirelike crystals by transmission electron microscopy
ISO 24639:2022 Microbeam analysis — Analytical electron microscopy — Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
ISO 21466:2019 Microbeam analysis — Scanning electron microscopy — Method for evaluating critical dimensions by CD-SEM
ISO 2128:2010 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
ISO 2128:1976 Anodizing of aluminium and its alloys; Determination of thickness of anodic oxide coatings; Non-destructive measurement by split-beam microscope
ISO 29301:2017 Microbeam analysis - Analytical electron microscopy - Methods for calibrating image magnification by using reference materials with periodic structures
ISO 16592:2006 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method
ISO 16592:2012 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method
ISO 19056-1:2015 Microscopes - Definition and measurement of illumination properties - Part 1: Image brightness and uniformity in bright field microscopy
ISO 10936-1:2017 Optics and photonics - Operation microscopes - Part 1: Requirements and test methods
ISO 17470:2004 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
ISO 20263:2017 Microbeam analysis — Analytical electron microscopy — Method for the determination of interface position in the cross-sectional image of the layered materials
ISO 10936-1:2000 Optics and optical instruments - Operation microscopes - Part 1: Requirements and test methods
ISO 29301:2010 Microbeam analysis - Analytical transmission electron microscopy - Methods for calibrating image magnification by using reference materials having periodic structures
ISO 4912:1981 Textiles; Cotton fibres; Evaluation of maturity; Microscopic method
ISO/TR 14880-5:2010 Optics and photonics - Microlens arrays - Part 5: Guidance on testing
ISO/CD 20263:2023 Microbeam analysis — Analytical electron microscopy — Method for the determination of interface position in the cross-sectional image of the layered materials
ISO 8672:1993 Air quality; determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy; membrane filter method
ISO 8672:2014 Air quality - Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy - Membrane filter method
ISO 18337:2015 Surface chemical analysis - Surface characterization - Measurement of the lateral resolution of a confocal fluorescence microscope
ISO 19463:2018 Microbeam analysis - Electron probe microanalyser (EPMA) - Guidelines for performing quality assurance procedures
ISO/CD 22262-2:2011 Air quality — Bulk materials — Part 2: Quantitative determination of asbestos by gravimetric and microscopical methods
ISO 1463:2021 Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
ISO 21222:2020 Surface chemical analysis — Scanning probe microscopy — Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
ISO 9220:1988 Metallic coatings; measurement of coating thickness; scanning electron microscope method
ISO 9220:2022 Metallic coatings — Measurement of coating thickness — Scanning electron microscope method
ISO 19056-2:2019 Microscopes — Definition and measurement of illumination properties — Part 2: Illumination properties related to the colour in bright field microscopy
ISO 14880-2:2006 Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations
ISO/CD 4407 Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope
ISO 22489:2006 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
ISO 22489:2016 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy
ISO 14880-4:2006 Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties
ISO/DIS 23124:2023 Surface Chemical Analysis — Measurement of lateral and axial resolutions of Raman microscope
ISO/FDIS 29301:2023 Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures
ISO 29301:2023 Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures
ISO 7404-5:2009 Methods for the petrographic analysis of coals - Part 5: Method of determining microscopically the reflectance of vitrinite
ISO 14595:2003 Analyse par microfaisceaux - Microanalyse par sonde à électrons - Lignes directrices pour les spécifications des matériaux de référence certifiés (CRM) (Première édition)
ISO 14595:2014 Microbeam analysis - Electron probe microanalysis - Guidelines for the specification of certified reference materials (CRMs)
ISO 22262-2:2014 Air quality - Bulk materials - Part 2: Quantitative determination of asbestos by gravimetric and microscopical methods
ISO 4407:2002 Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope
ISO 11952:2019 Surface chemical analysis — Scanning-probe microscopy — Determination of geometric quantities using SPM: Calibration of measuring systems
ISO 11952:2014 Surface chemical analysis - Scanning-probe microscopy - Determination of geometric quantities using SPM: Calibration of measuring systems
ISO 19749:2021 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy
ISO 13067:2011 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size
ISO 14880-3:2006 Optics and photonics - Microlens arrays - Part 3: Test methods for optical properties other than wavefront aberrations
ISO 17470:2014 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
ISO 17751-1:2023 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends — Part 1: Light microscopy method
ISO/FDIS 17751-1 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends — Part 1: Light microscopy method
ISO 17751-1:2016 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 1: Light microscopy method
ISO 14595:2003/Cor 1:2005 Analyse par microfaisceaux - Microanalyse par sonde à électrons - Lignes directrices pour les spécifications des matériaux de référence certifiés (CRM) RECTIFICATIF TECHNIQUE 1 (Première édition)
ISO 15632:2021 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA)
ISO 15632:2012 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
ISO 11938:2012 Microbeam analysis - Electron probe microanalysis - Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
ISO 24173:2009 Microbeam analysis - Guidelines for orientation measurement using electron backscatter diffraction
ISO 22309:2011 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
ISO 8037-2:1997/cor 1:2002 Optics and optical instruments - Microscopes; Slides - Part 2: Quality of material, standards of finish and mode of packaging; Technical Corrigendum 1
ISO 18369-3:2006 Ophthalmic optics - Contact lenses - Part 3: Measurement methods
ISO 15632:2002 Microbeam analysis - Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors
ISO/DIS 14880-2 Optics and photonics — Microlens arrays — Part 2: Test methods for wavefront aberrations
ISO/DIS 14880-4 Optics and photonics — Microlens arrays — Part 4: Test methods for geometrical properties
ISO 14594:2003/Cor 1:2009 Microbeam analysis - Electron probe microanalysis - Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy; Technical Corrigendum 1

Korean Agency for Technology and Standards (KATS), split beam microscopy

KS D ISO 22493:2012 Microbeam analysis－Scanning electron microscopy－Vocabulary
KS D ISO 16592:2011 Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
KS I ISO 4407:2012 Hydraulic fluid power-Fluid contamination-Determination of particulate contamination by the counting method using an optical microscope
KS E 4005-2007(2012) Portable polarizing microscope for sampling and determining incombustible matter in coal and rock-dust mixtures
KS E 4005-1981 Portable polarizing microscope for sampling and determining incombustible matter in coal and rock-dust mixtures
KS B ISO 10936-1:2006 Optics and optical instruments－Operation microscopes－Part 1：Requirements and test methods
KS B ISO 10936-1-2006(2016) Optics and optical instruments — Operation microscopes —Part 1: Requirements and test methods
KS D 2713-2006 Evaluation of spatial resolution of NSOM(Near-field Scanning Optical Microscope)
KS D 2714-2006 Scanning probe microscope-Method for lateral force microscope
KS M ISO 8254-3:2022 Paper and board — Measurement of specular gloss — Part 3: 20° gloss with a converging beam, TAPPI method
KS I ISO 8672:2006 Air quality－Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy(Membrane filter method)
KS M ISO 8254-1:2019 Paper and board — Measurement of specular gloss — Part 1：75° gloss with a converging beam, TAPPI method
KS D 8544-2006 Metallic coating-Measurement of coating thickness-Transmission electron microscopy method
KS D 8544-2016(2021) Metallic coating－Measurement of coating thickness－Transmission electron microscopy method
KS D ISO 2128:2011 Anodizing of aluminium and its alloys－Determination of thickness of anodic oxidation coatings－Non-destructive measurement by split-beam microscope
KS D ISO 16592-2011(2016) Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
KS B ISO 10936-1-2006(2021) Optics and optical instruments — Operation microscopes —Part 1: Requirements and test methods
KS D 0204-2007 Steel-Determination of content of nonmetallic inclusions-Micrographic method using standard diagrams
KS D ISO 9220:2009 Metallic coatings－Measurement of coating thickness－Scanning electron microscope method
KS D ISO 9220-2009(2022) Metallic coatings－Measurement of coating thickness－Scanning electron microscope method
KS D 8519-2009(2015) Metallic and oxide coating－Measurement of coating thickness－Microscopical method
KS D ISO 9220-2009(2017) Metallic coatings－Measurement of coating thickness－Scanning electron microscope method
KS D 0204-1982 Steel-Determination of content of nonmetallic inclusions-Micrographic method using standard diagrams
KS M ISO 8254-2:2019 Paper and board — Measurement of specular gloss — Part 2 : 75° gloss with a parallel beam, DIN method
KS I ISO 8672-2006(2017) Air quality－Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy(Membrane filter method)
KS B ISO 14880-2:2013 Optics and photonics ― Microlens arrays ― Part 2: Test methods for wavefront aberrations
KS B ISO 14880-2:2008 Optics and photonics-Microlens arrays-Part 2:Test methods for wavefront aberrations
KS D ISO 22489:2012 Microbeam analysis－Electron probe microanalysis－Quantitative point analysis for bulk specimens using wavelength-dispersive x-ray spectroscopy
KS D ISO 22309-2011(2016) Microbeam analysis－Quantitative analysis using energy-dispersive spectrometry(EDS)
KS C IEC 62629-12-1:2022 3D Display Devices — Part 12-1: Measuring methods for stereoscopic displays using glasses — Optical
KS I ISO 4407:2017 Hydraulic fluid power－Fluid contamination－Determination of particulate contamination by the counting method using an optical microscope
KS I ISO 4407-2017(2022) Hydraulic fluid power－Fluid contamination－Determination of particulate contamination by the counting method using an optical microscope
KS I ISO 8672:2021 Air quality — Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy —Membrane filter method
KS D ISO 22309-2011(2021) Microbeam analysis－Quantitative analysis using energy-dispersive spectrometry(EDS)
KS D 8310-2001(2021) Anodizing of aluminium and its alloys－Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-dest
KS K ISO 17751-1:2019 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends — Part 1: Light microscopy method Textiles — Quantitative analysis of cashmere, wool, other specialty
KS I ISO 13794-2008(2018) Ambient air－Determination of asbestos fibres－Indirect-transfer transmission electron microscopy method
KS D ISO TR 17270:2007 Microbeam analysis－Analytical transmission electron microscopy－Technical report on the determination of the experimental parameters for electron energy loss spectroscopy
KS D ISO 2128-2011(2016) Anodizing of aluminium and its alloys－Determination of thickness of anodic oxidation coatings－Non-destructive measurement by split-beam microscope
KS D ISO 2128-2011(2021) Anodizing of aluminium and its alloys－Determination of thickness of anodic oxidation coatings－Non-destructive measurement by split-beam microscope
KS D ISO 14594:2018 Microbeam analysis — Electron probe microanalysis — Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
KS D ISO 22489:2018 Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy
KS E ISO 7404-5:2013 Methods for the petrographic analysis of bituminous coaland anthracite-Part 5: Method of determining microscopicallythe reflectance of vitrinite
KS E ISO 7404-5:2003 Methods for the petrographic analysis of bituminous coal and anthracite-Part 5 : Method of determining microscopically the reflectance of vitrinite
KS D 8310-2001(2016) Anodizing of aluminium and its alloys－Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-dest
KS D ISO 22309:2011 Microbeam analysis-Quantitative analysis using energy-dispersive spectrometry(EDS)
KS D ISO 16592-2011(2021) Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
KS D ISO 15632:2012 Microbeam analysis－Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors
KS B ISO 14880-2:2018 Optics and photonics — Microlens arrays — Part 2: Test methods for wavefront aberrations

Japanese Industrial Standards Committee (JISC), split beam microscopy

JIS K 0149-1:2008 Microbeam analysis -- Scanning electron microscopy -- Guidelines for calibrating image magnification
JIS K 3850-1:2000 Measuring method for airborne fibrous particles -- Part 1: Optical microscopy method and scanning electron microscopy method
JIS K 3850-1:2006 Determination of airborne fibrous particles -- Part 1: Optical microscopy method and scanning electron microscopy method
JIS B 7152:1991 Biological microscope objectives and eyepieces -- Methods of measurement of performance
JIS H 8680-3:1998 Test methods for thickness of anodic oxide coatings on aluminium and aluminium alloys -- Part 3: Non-destructive measurement by split-beam microscope
JIS K 0190:2010 Microbeam analysis -- Electron probe microanalysis -- Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
JIS A 1481-4:2016 Air quality -- Bulk materials -- Part 4: Quantitative determination of asbestos by gravimetric and microscopical methods
JIS M 8816:1992 Solid mineral fuels -- Methods of microscopical measurement for the macerals and reflectance
JIS K 0189:2013 Microbeam analysis.Electron probe microanalysis.Determination of experimental parameters for wavelength dispersive X-ray spectroscopy
JIS K 3850-3:2000 Measuring method for airborne fibrous particles -- Part 3: Indirect-transfer transmission electron microscopy method
JIS K 3850-2:2000 Measuring method for airborne fibrous particles -- Part 2: Direct-transfer transmission electron microscopy method
JIS B 9930:2006 Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using an optical microscope
JIS H 8680-3:2013 Anodizing of aluminium and its alloys.Determination of thickness of anodic oxidation coatings.Part 3: Non-destructive measurement by split-beam microscope

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, split beam microscopy

GB/T 8014.3-2005 Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 3:Split-beam microscope method
GB/T 18907-2013 Microbeam analysis.Analytical electron microscopy.Selected-area electron diffraction analysis using a transmission electron microscope
GB/T 32282-2015 Measurement of Dislocation Density in Gallium Nitride Single Crystal by Cathodoluminescence Microscopy
GB/T 29190-2012 Measurement methods of drift rate of scanning probe microscope
GB/T 15247-2008 Microbeam analysis.Electron probe microanalysis.Guidelines for determining the carbon content of steels using calibration curve method
GB/T 25189-2010 Microbeam analysis.Determination method for quantitative analysis parameters of SEM-EDS
GB/T 6462-2005 Metallic and oxide coatings-Measurement of coating thinckness-Microscopical method
GB/T 17361-2013 Microbeam analysis.Identification of authigenic clay mineral in sedimentary rock menthod by scanning electron microscope and energy dispersive spectrometer
GB/T 28634-2012 Microbeam analysis.Electron probe microanalysis.Quantitative point analysis for bulk specimen using wavelength dispersive X-ray spectroscopy
GB/T 30705-2014 Microbeam analysis.Electron probe microanalysis.Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
GB/T 42659-2023 Surface Chemical Analysis Scanning Probe Microscopy Determination of Geometric Quantities Using Scanning Probe Microscopy: Measurement System Calibration
GB 8015.2-1987 Test method for thickness of anodized films on aluminum and aluminum alloys - split beam microscopy
GB/T 8015.2-1987 Test methods for thickness of anodic oxidation coatings on aluminium and aluminium alloys--Split-beam microscope method
GB/T 31227-2014 Test method for the surface roughness by atomic force microscope for sputtered thin films
GB/T 6462-1986 Metallic and oxide coatings--Measurement of coating thickness--Microscopical method
GB/T 19267.6-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 6: Scanning electron microscopy
GB/T 19267.8-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 8:Microspectrophotometry
GB/T 19267.8-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 8: Microspectrophometry
GB/T 20082-2006 Hydraulic fluid power-Fluid contamination-Determination of particulate contamination by the counting method using an optical microscope
GB/T 43088-2023 Method for determination of dislocation density in metallic thin crystal specimens by microbeam analysis and electron microscopy
GB/T 19267.6-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 6:Scanning electron microscope/X ray energy dispersive spectrometry
GB/T 41805-2022 Methodology for the quantitative inspection of the defect on optics surface—Microscopic scattering dark-field imaging
GB/Z 21738-2008 Fundamental structures of one dimensional nano-materials.High resolution transmission electron microscopy characterization
GB/T 16582-2008 Plastics.Determination of melting behaviour (melting temperature of melting range)of semi-crystalline polymers by capillary tube and polarizing-microscope methods
GB/T 21783-2008 Plasties.Determination of melting behaviour (melting temperature or melting range)of semi-crystalline polymers by capillary tube and polarizing-microscope methods
GB/T 41869.2-2022 Optics and photonics—Microlens array—Part 2:Test methods for wavefront aberrations

British Standards Institution (BSI), split beam microscopy

BS ISO 25498:2010 Microbeam analysis - Analytical electron microscopy - Selected-area electron diffraction analysis using a transmission electron microscope
BS ISO 23420:2021 Microbeam analysis. Analytical electron microscopy. Method for the determination of energy resolution for electron energy loss spectrum analysis
BS ISO 19056-3:2022 Microscopes. Definition and measurement of illumination properties - Incident light fluorescence microscopy with incoherent light sources
20/30380369 DC BS ISO 23420. Microbeam analysis. Analytical electron microscopy. Method for the determination of energy resolution for electron energy loss spectrum analysis
BS ISO 21466:2019 Microbeam analysis. Scanning electron microscopy. Method for evaluating critical dimensions by CDSEM
21/30395346 DC BS ISO 19056-3. Microscopes. Definition and measurement of illumination properties. Part 3. Incident light fluorescence microscopy with incoherent light sources
BS ISO 16592:2012 Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method
BS ISO 19056-1:2015 Microscopes. Definition and measurement of illumination properties. Image brightness and uniformity in bright field microscopy
18/30344520 DC BS ISO 21466. Microbeam analysis. Scanning electron microscopy. Method for evaluating critical dimensions by CD-SEM
BS ISO 24639:2022 Microbeam analysis. Analytical electron microscopy. Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
BS EN 14086:2003 Paper and board - Measurement of specular gloss - 45 ° gloss with a parallel beam, DIN method
21/30404763 DC BS ISO 24639. Microbeam analysis. Analytical electron microscopy. Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
BS ISO 8672:2014 Air quality. Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy. Membrane filter method
BS ISO 10936-1:2017 Tracked Changes. Optics and photonics. Operation microscopes. Requirements and test methods
BS ISO 20263:2017 Microbeam analysis. Analytical electron microscopy. Method for the determination of interface position in the cross-sectional image of the layered materials
BS ISO 29301:2010 Microbeam analysis - Analytical transmission electron microscopy - Methods for calibrating image magnification by using reference materials having periodic structures
BS ISO 18337:2015 Surface chemical analysis. Surface characterization. Measurement of the lateral resolution of a confocal fluorescence microscope
BS EN ISO 9220:1989 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
BS EN ISO 2128:2010 Anodizing of aluminium and its alloys. Determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope
BS ISO 21222:2020 Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
BS ISO 7404-5:2009 Methods for the petrographic analysis of coals - Method of determining microscopically the reflectance of vitrinite
BS ISO 17470:2014 Microbeam analysis. Electron probe microanalysis. Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
19/30351707 DC BS ISO 21222. Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
18/30339980 DC BS ISO 19056-2. Microscopes. Definition and measurement of illumination properties. Part 2. Illumination properties related to the colour in bright field microscopy
BS ISO 22262-2:2014 Air quality. Bulk materials. Quantitative determination of asbestos by gravimetric and microscopical methods
BS ISO 11938:2013 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
19/30394914 DC BS ISO 15632. Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energydispersive X-ray spectrometers for use in electron probe microscope or an electron probe microanalyser (EPMA)
BS ISO 29301:2017 Microbeam analysis. Analytical electron microscopy. Methods for calibrating image magnification by using reference materials with periodic structures
BS ISO 22489:2007 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
BS ISO 22489:2016 Microbeam analysis. Electron probe microanalysis. Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy
21/30394409 DC BS ENISO 9220. Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
BS 3406-4:1993 Methods for determination of particle size distribution - Guide to microscope and image analysis methods
BS EN 12373-3:1999 Aluminium and Aluminium Alloys - Anodizing - Part 3: Determination of Thickness of Anodic Oxidation Coatings - Non-Destructive Measurement by Split-Beam Microscope Ratified European Text
20/30395419 DC BS EN ISO 1463. Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
BS EN ISO 9220:2022 Tracked Changes. Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
BS ISO 4407:2002 Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope
BS ISO 19749:2021 Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
BS ISO 14595:2003 Microbeam analysis - Electron probe microanalysis - Guidelines for the specification of certified reference materials (CRMs)
BS ISO 14595:2014 Microbeam analysis. Electron probe microanalysis. Guidelines for the specification of certified reference materials (CRMs)
23/30420097 DC BS ISO 23124 Surface Chemical Analysis. Measurement of lateral and axial resolutions of Raman microscope
BS EN ISO 17751-1:2016 Textiles. Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends. Light Microscopy method
BS EN ISO 21363:2022 Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
BS EN ISO 19749:2023 Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
BS ISO 21363:2020 Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
BS ISO 13067:2011 Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
BS 6127-5:1995 Petrographic analysis of bituminous coal and anthracite - Method of determining microscopically the reflectance of vitrinite
BS EN 62629-22-1:2013 3D display devices. Measuring methods for autostereoscopic displays. Optical
BS DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
BS ISO 11952:2019 Surface chemical analysis. Scanning-probe microscopy. Determination of geometric quantities using SPM: Calibration of measuring systems
BS ISO 15632:2012 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
BS ISO 15632:2021 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA)
18/30351679 DC BS ISO 19749. Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
18/30351714 DC BS ISO 21363. Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
BS ISO 11938:2012 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy

Association Francaise de Normalisation, split beam microscopy

X11-660:1983 Particle size analysis by optical microscope method. General indications on microscope.
NF X21-003:2006 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry.
XP X21-015*XP ISO/TS 24597:2011 Microbeam analysis - Scanning electron microscopy - Methods of evaluating image sharpness
XP ISO/TS 24597:2011 Analyse par microfaisceaux - Microscopie électronique à balayage - Méthodes d'évaluation de la netteté d'image
NF X11-661:1990 Particle size analysis. Determination of particle size of powders. Optical microscope method.
NF X21-007:2008 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steel using a calibration curve method.
NF G06-008*NF EN ISO 20705:2020 Textiles - Quantitative microscopical analysis - General principles of testing
NF EN ISO 20705:2020 Textiles - Analyse quantitative par microscopie - Principes généraux des essais
NF A91-110:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method.
NF A91-110*NF EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
NF A91-108:1995 Metallic coatings. Measurement of coating thickness. Scanning electron microscope method.
NF A91-108*NF EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
NF EN ISO 9220:2022 Revêtements métalliques - Mesurage de l'épaisseur de revêtement - Méthode au microscope électronique à balayage
NF S10-132-2*NF EN ISO 14880-2:2007 Optics and photonics - Microlens arrays - Part 2 : test methods for wavefront aberrations
NF Q03-101-1*NF EN ISO 8254-1:2009 Paper and board - Measurement of specular gloss - Part 1 : 75o gloss with a converging beam, TAPPI method
NF EN ISO 8254-2:2016 Papiers et cartons - Mesurage du brillant spéculaire - Partie 2 : brillant à 75 degrés avec un faisceau parallèle, méthode DIN
NF S10-132-4*NF EN ISO 14880-4:2006 Optics and phonotics - Microlens arrays - Part 4 : test methods for geometrical properties.
NF X43-050:2021 Air quality - Determination of the asbestos fiber concentration by transmission electron microscopy - Indirect method
NF A91-481*NF EN ISO 2128:2010 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
NF X21-006:2007 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy.
NF EN ISO 17751-1:2016 Textiles - Analyse quantitative du cachemire, de la laine, d'autres fibres animales spéciales et leurs mélanges - Partie 1 : méthode de microscopie optique
NF X21-001:2006 Microbeam analysis - Electron probe microanalysis - Guidelines for the specification of certified reference materials (CRMs).
NF X43-066-2*NF ISO 22262-2:2014 Air quality - Bulk materials - Part 2 : quantitative determination of asbestos by gravimetric and microscopical methods
NF Q03-101-2*NF EN ISO 8254-2:2016 Paper and board - Measurement of specular gloss - Part 2 : 75 degree gloss with a parallel beam, DIN method
NF EN ISO 8254-1:2009 Papiers et cartons - Mesurage du brillant spéculaire - Partie 1 : brillant à 75o avec un faisceau convergent, méthode TAPPI
NF T16-404:2020 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy
NF T16-403*NF ISO 19749:2021 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy
NF T16-404*NF EN ISO 21363:2022 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy
NF X43-050:1996 Air quality. Determination of the asbestos fiber concentration by transmission electron microscopy. Indirect method.
NF E48-660:1991 Hydraulic fluid systems. Fluids. Determination of solid particulate contamination by optical microscope and image analysis.
NF EN 14086:2003 Papiers et cartons - Mesurage du brillant spéculaire - Brillant à 45o avec un faisceau parallèle, méthode DIN
NF X21-002:2007 Microbeam analysis - Electron probe microanalysis - Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy.
NF E48-651*NF ISO 4407:2002 Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope.
NF G07-142-1*NF EN ISO 17751-1:2016 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends - Part 1 : light microscopy method
NF X21-013*NF ISO 11938:2012 Microbeam analysis - Electron probe microanalysis - Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy.
FD T16-203:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
NF X21-011*NF ISO 24173:2009 Microbeam analysis - Guidelines for orientation measurement using electron backscatter diffraction
NF EN ISO 2128:2010 Anodisation de l'aluminium et de ses alliages - Détermination de l'épaisseur des couches anodiques - Méthode non destructive par microscope à coupe optique
NF X21-008:2012 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive ray spectrometers for use in electron probe microanalysis
NF EN ISO 14880-2:2007 Optique et photonique - Réseaux de microlentilles - Partie 2 : méthodes d'essai pour les aberrations du front d'onde
NF C93-546-22-1*NF EN 62629-22-1:2013 3D Display Devices - Part 22-1 : measuring methods for autostereoscopic displays - Optical

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, split beam microscopy

GB/T 33834-2017 Microbeam analysis—Scanning electron microscopy—Scanning electron microscope analysis of biological specimens
GB/T 34879-2017 Geometrical product specifications (GPS)—Metrological characteristics and guide to uncertainty of measurement for optical confocal microscopes

IN-BIS, split beam microscopy

American Society for Testing and Materials (ASTM), split beam microscopy

ASTM F728-81(1997)e1 Standard Practice for Preparing An Optical Microscope for Dimensional Measurements
ASTM F72-95(2001) Standard Specification for Gold Wire for Semiconductor Lead Bonding
ASTM B588-88(2001) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
ASTM B651-83(2019) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
ASTM B651-83(2001) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with the Double-Beam Interference Microscope
ASTM B651-83(1995) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with the Double-Beam Interference Microscope
ASTM B651-83(2006) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
ASTM B651-83(2015) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
ASTM B651-83(2010) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
ASTM F3294-18 Standard Guide for Performing Quantitative Fluorescence Intensity Measurements in Cell-based Assays with Widefield Epifluorescence Microscopy
ASTM D5671-95(2005) Standard Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light
ASTM D5061-07 Standard Test Method for Microscopical Determination of the Textural Components of Metallurgical Coke
ASTM D5061-19 Standard Test Method for Microscopical Determination of the Textural Components of Metallurgical Coke
ASTM D4616-95(2000) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
ASTM D4616-95 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
ASTM D4616-95(2018) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
ASTM E1588-07e1 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-ray Spectrometry
ASTM E1588-07 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM D2798-99 Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite in a Polished Specimen of Coal
ASTM D5235-13 Standard Test Method for Microscopical Measurement of Dry Film Thickness of Coatings on Wood Products
ASTM D5235-14 Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products
ASTM E1588-95(2001) Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy-Dispersive Spectroscopy
ASTM E1588-08 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E1588-10 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E1588-95 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy-Dispersive Spectroscopy
ASTM D2799-12 Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
ASTM D2799-13 Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
ASTM B748-90(2006) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM B748-90(1997) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM D5235-18 Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products
ASTM D7708-23a Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks
ASTM E2808-11 Standard Guide for Microspectrophotometry and Color Measurement in Forensic Paint Analysis
ASTM D5235-97 Standard Test Method for Microscopical Measurement of Dry Film Thickness of Coatings on Wood Products
ASTM B748-90(2021) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM B748-90(2001) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM B748-90(2016) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM D7391-17 Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy
ASTM D7391-20 Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy
ASTM D7391-17e1 Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy
ASTM E1588-20 Standard Practice for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
ASTM C1356-96(2001) Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
ASTM B748-90(2010) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM D7391-09 Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy
ASTM D5770-02 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
ASTM D5770-96 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
ASTM D5770-02(2007) Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
ASTM B487-20 Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
ASTM B588-88(2006) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
ASTM B588-88(1994) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
ASTM C978-04 Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
ASTM C978-04(2009) Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
ASTM D7708-14 Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks
ASTM B588-88(2010) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
ASTM D7708-23 Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks
ASTM E3309-21 Standard Guide for Reporting of Forensic Primer Gunshot Residue (pGSR) Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry (SEM/EDS)

Taiwan Provincial Standard of the People's Republic of China, split beam microscopy

CNS 11019-1984 Method for Microscopical Determination of the Reflectance of the Organic Components in a Polished Specimen of Coal
CNS 11018-1984 Method of Preparing Coal Samples for Microscopical Analysis by Reflected Light
CNS 11020-1984 Method for Microscopical Determination of Volume Percent of Petrographic Components of Coal

VN-TCVN, split beam microscopy

TCVN 5876-1995 Anodizing of aluminium and its alloys.Determination of thickness of anodic oxide coatings.Non.destructive measurement by split.beam microscope
TCVN 6035-1995 Textiles.Cotton fibres.Evaluation of maturity.Microscopic method
TCVN 6504-1999 Air quality.Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy.Membrane filter method

TH-TISI, split beam microscopy

TIS 1083-1992 Standard for measurement of coating thickness by microscopical method

工业和信息化部, split beam microscopy

YS/T 1210-2018 Microscope polarization test method for oxygen content in copper
SJ/T 11759-2020 Measurement of Photovoltaic Cell Electrode Grid Line Aspect Ratio Laser Scanning Confocal Microscopy
SJ/T 11591.4.1.1-2016 Stereoscopic display devices Part 4-1-1: Measurement methods for glasses-type stereoscopic display devices - Optics and optoelectronics

Professional Standard - Petrochemical Industry, split beam microscopy

SH/T 0336-1994 Determination method of grease impurity content (microscopic method)

国家市场监督管理总局、中国国家标准化管理委员会, split beam microscopy

GB/T 35098-2018 Microbeam analysis—Transmission electron microscopy—Morphological identification method of plant viruses by transmission electron microscopy
GB/T 40275-2021 Textiles—Quantitative analysis of bicomponent fiber—Melting microscopy method
GB/T 40066-2021 Nanotechnologies—Thickness measurement of graphene oxide—Atomic Force Microscopy (AFM)
GB/T 38396-2019 Pitch products of coal carbonization—Determination of mesophase content—Microscopical analysis by reflected light
GB/T 40905.1-2021 Textiles—Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends—Part 1: Light microscopy method

(U.S.) Ford Automotive Standards, split beam microscopy

FORD FLTM EU-BA 053-1-2000 MICROSCOPICAL METHOD OF MEASURING DECARBURIZATION ON SPRING STEELS

Professional Standard - Commodity Inspection, split beam microscopy

SN/T 3231-2012 Determination of asbestos in talcum.Polarized light microscope and X-ray diffraction method
SN/T 3798-2014 Determination of asbestos in building and automobile materials.Polarized light microscope
SN/T 3131-2012 Determination of asbestos in bicycle brake rubbers.Palarized light microscope and X-ray diffraction method
SN/T 2649.2-2010 Determination of asbestos in import and export cosmetics.Part 2:X-ray diffraction and polarized light microscopy method

Institute of Interconnecting and Packaging Electronic Circuits (IPC), split beam microscopy

IPC TM-650 2.2.14.1-1995 Solder Powder Particle Size Distribution - Measuring Microscope Method

European Committee for Standardization (CEN), split beam microscopy

EN ISO 2128:2010 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010)
EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022)
EN ISO 14880-2:2006 Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations
EN ISO 9220:1994 Metallic Coatings - Measurement of Coating Thickness - Scanning Electron Microscope Method (ISO 9220 : 1988)
EN ISO 8254-2:2016 Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam@ DIN method
EN 12373-3:1998 Aluminium and Aluminium Alloys - Anodizing - Part 3: Determination of Thickness of Anodic Oxidation Coatings - Non-Destructive Measurement by Split-Beam Microscope Ratified European Text
prEN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021)
EN ISO 19749:2023 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021)
EN ISO 14880-4:2006 Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties
prEN ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)
EN ISO 17751-1:2016 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 1: Light Microscopy method (ISO 17751-1:2016)
EN ISO 14880-3:2006 Optics and phonotics - Microlens arrays - Part 3: Test methods for optical properties other than wavefront aberrations
EN ISO 18369-3:2017 Ophthalmic optics - Contact lenses - Part 3: Measurement methods

German Institute for Standardization, split beam microscopy

DIN 58959-4:1997 Quality management in medical microbiology - Part 4: Requirements for investigations using light microscopes
DIN 53943-3:1983 Testing of textiles; cotton fibre maturity; determination of the percent maturity; microscopic method using a polarisation microscope
DIN ISO 16592:2015 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method (ISO 16592:2012)
DIN EN ISO 2128:2010-12 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010); German version EN ISO 2128:2010
DIN EN ISO 9220:2022-05 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022); German version EN ISO 9220:2022
DIN SPEC 52407:2015-03 Nanotechnologies - Methods for preparation and assessment for particle measurements with atomic force microscopy (AFM) and transmission scanning electron microscopy (TSEM)
DIN V 32938:1998 Surface profiling by means of optical microscopic methods - Concepts and measurement procedures
DIN EN ISO 14880-2:2007 Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations (ISO 14880-2:2006); English version of DIN EN ISO 14880-2:2007-03
DIN EN ISO 2128:2010 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010); German version EN ISO 2128:2010
DIN 58959-4:1997-06 Quality management in medical microbiology - Part 4: Requirements for investigations using light microscopes / Note: To be replaced by DIN 58959-6 Beiblatt 2 (2021-08, t).
DIN 58943-32:1995 Medical microbiology - Diagnosis of tuberculosis - Part 32: Detection of mycobacteria by microscopic methods
DIN EN 14086:2003-04 Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam, DIN method; German version EN 14086:2003
DIN EN ISO 8254-1:2009-09 Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss with a converging beam, TAPPI method (ISO 8254-1:2009); German version EN ISO 8254-1:2009
DIN EN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021); German and English version prEN ISO 9220:2021
DIN EN ISO 8254-2:2016-11 Paper and board - Measurement of specular gloss - Part 2: 75° gloss with a parallel beam, DIN method (ISO 8254-2:2016); German version EN ISO 8254-2:2016
DIN EN ISO 14880-4:2006 Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties (ISO 14880-4:2006) English version of DIN EN ISO 14880-4:2006-08
DIN EN ISO 17751-1:2022-09 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends - Part 1: Light microscopy method (ISO/DIS 17751-1:2022); German and English version prEN ISO 17751-1:2022 / Note: Date of issue 2022-08-19*Intended as r...
DIN EN ISO 17751-1:2016-11 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 1: Light microscopy method (ISO 17751-1:2016); German version EN ISO 17751-1:2016 / Note: To be replaced by DIN EN ISO 17751-1 (2022-09).
DIN EN ISO 14880-4:2006-08 Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties (ISO 14880-4:2006); German version EN ISO 14880-4:2006
DIN EN ISO 14880-2:2007-03 Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations (ISO 14880-2:2006); German version EN ISO 14880-2:2006
DIN EN ISO 14880-3:2006 Optics and photonics - Microlens arrays - Part 3: Test methods for optical properties other than wavefront aberrations (ISO 14880-3:2006) English version of DIN EN ISO 14880-3:2006-08
DIN ISO 13067:2015 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2011)
DIN EN ISO 19749:2023-07 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021); German version EN ISO 19749:2023
DIN EN ISO 21363:2022-03 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020); German version EN ISO 21363:2022
DIN 58943-32:2011 Medical microbiology - Diagnosis of tuberculosis - Part 32: Detection of mycobacteria by microscopic methods; Text in German and English
DIN 58943-32:2015 Medical microbiology - Diagnosis of tuberculosis - Part 32: Detection of mycobacteria by microscopic methods; Text in German and English

Standard Association of Australia （SAA）, split beam microscopy

AS 2856.3:2000 Coal petrography - Method for microscopical determination of the reflectance of coal macerals
IEC 63145-20-20:2019 Eyewear display — Part 20-20: Fundamental measurement methods — Image quality

Professional Standard - Education, split beam microscopy

JY/T 0586-2020 General Rules for Analytical Methods of Laser Scanning Confocal Microscopy

PL-PKN, split beam microscopy

PN C04424-02-1985 Pigments Determination of particie size distribution Microscopic method-simple
PN H04951-1986 Powder metallurgy Determination of the particie size of powder by the optical microscope method
PN G04524-1992 Hard coal Method for the petrographic analysis Determination microscopically reflectance of vitrinite
PN-ISO 4407-2021-03 P Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using an optical microscope
PN Z04097 Arkusz 01-1974 Air purity protection Tests for the size composition of dust Measurement of quantitative distribution of projective dust particie size ^2 (im with micros- cope without using of immersion li?uid

Group Standards of the People's Republic of China, split beam microscopy

T/CSTM 00003-2019 Thickness measurements of two-dimensional materials Atomic force microscopy (AFM)
T/CSTM 00799-2023 Determination of grain size in steel—High temperature laser scanning confocal microscope method
T/GDASE 0008-2020 Determination of Young's modulus of graphene film
T/TIAA 014-2018 Optical measuring methods of display devices for Vehicle electronic rearview mirror

RU-GOST R, split beam microscopy

GOST 15114-1978 Telescope system for optical devices. Visual method of resolution limits determination
GOST R ISO 27911-2015 State system for ensuring the uniformity of measurements. Surface chemical analysis. Scanning-probe microscopy. Definition and calibration of the lateral resolution of a near-field optical microscope
GOST R 8.631-2007 State system for ensuring the uniformity of measurements. Scanning electron microscopes. Methods for verification
GOST R 55659-2013 Methods for the petrographic analysis of coals. Part 5. Method of determining microscopically the reflectance of vitrinite
GOST R 8.636-2007 State system for ensuring the uniformity of measurements. Scanning electron microscopes. Methods for calibration
GOST 8.594-2009 State system for ensuring the uniformity of measurements. Scanning electron microscopes. Method for verification
GOST ISO 4407-2006 Industrial cleanliness. Determination of fluid contamination by the counting method using an optical microscope
GOST R 8.630-2007 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Methods for verification
GOST 8.593-2009 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Method for verification
GOST R 8.635-2007 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Method for calibration
GOST R 8.697-2010 State system for ensuring the uniformity of measurements. Interpenar spacings in crystals. Method for measurement by means of a transmission electron microscope

Danish Standards Foundation, split beam microscopy

DS/EN ISO 2128:2010 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
DS/EN 14086:2003 Paper and board - Measurement of specular gloss - 45º gloss with a parallel beam, DIN method
DS/EN ISO 1463:1994 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
DS/EN ISO 9220:1995 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
DS/EN ISO 8254-2:2003 Paper and board - Measurement of specular gloss - Part 2: 75 gloss with a parallel beam, DIN method
DS/EN ISO 8254-1:2009 Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss with a converging beam, TAPPI method
DS/ISO 19749:2021 Nanotechnologies – Measurements of particle size and shape distributions by scanning electron microscopy
DS/EN ISO 1463:2021 Metallic and oxide coatings – Measurement of coating thickness – Microscopical method (ISO 1463:2021)
DS/ISO 7404-5:2009 Methods for the petrographic analysis of coals - Part 5: Method of determining microscopically the reflectance of vitrinite
DS/ISO/TS 10798:2011 Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
DS/IEC 62906-5-3:2021 Laser display devices – Part 5-3: Measuring methods of image quality for laser projection displays
DS/EN ISO 14880-2:2007 Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations
DS/EN ISO 14880-4:2006 Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties

Professional Standard - Machinery, split beam microscopy

JB/T 5585-1991 Test method of transmission electron microscope resolution

PT-IPQ, split beam microscopy

NP 3160-1986

Association of German Mechanical Engineers, split beam microscopy

VDI/VDE 2655 Blatt 1.1-2008 Optical measurement and microtopographies - Calibration of interference microscopes and depth measurement standards for roughness measurement
VDI/VDE 2655 Blatt 1.2-2010 Optical measurement of microtopography - Calibration of confocal microscopes and depth setting standards for roughness measurement
VDI 3492-2004 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method
VDI 3492-2013 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method
VDI 3861 Blatt 2-2008 Stationary source emissions - Measurement of inorganic fibrous particles in exhaust gas - Scanning electron microscopy method

KR-KS, split beam microscopy

KS K 5578-2023 Detection of landfowl feather fiber in plumage — Light microscopy method
KS M ISO 8254-3-2022 Paper and board — Measurement of specular gloss — Part 3: 20° gloss with a converging beam, TAPPI method
KS M ISO 8254-1-2019 Paper and board — Measurement of specular gloss — Part 1：75° gloss with a converging beam, TAPPI method
KS B ISO 10936-1-2023 Optics and photonics — Operation microscopes — Part 1: Requirements and test methods
KS M ISO 8254-2-2019 Paper and board — Measurement of specular gloss — Part 2 : 75° gloss with a parallel beam, DIN method
KS M ISO 8254-3-2016 Paper and board－Measurement of specular gloss－Part 3：20 degree gloss with a converging beam, TAPPI method
KS C IEC 62629-12-1-2022 3D Display Devices — Part 12-1: Measuring methods for stereoscopic displays using glasses — Optical
KS I ISO 4407-2017 Hydraulic fluid power－Fluid contamination－Determination of particulate contamination by the counting method using an optical microscope
KS I ISO 8672-2021 Air quality — Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy —Membrane filter method
KS D ISO 14594-2018(2023) Microbeam analysis — Electron probe microanalysis — Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
KS K ISO 17751-1-2019 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends — Part 1: Light microscopy method Textiles — Quantitative analysis of cashmere, wool, other specialty
KS C ISO 19749-2023 Nanotechnologies — Measurements of particle size and shape distributions by scanning electron microscopy
KS C ISO 21363-2023 Nanotechnologies — Measurements of particle size and shape distributions by transmission electron microscopy
KS D ISO TR 17270-2007 Microbeam analysis－Analytical transmission electron microscopy－Technical report on the determination of the experimental parameters for electron energy loss spectroscopy
KS D ISO 14594-2018 Microbeam analysis — Electron probe microanalysis — Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
KS D ISO 22489-2018 Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy
KS B ISO 14880-2-2018 Optics and photonics — Microlens arrays — Part 2: Test methods for wavefront aberrations
KS E ISO 7404-5-2013(2023) Methods for the petrographic analysis of bituminous coaland anthracite－Part 5: Method of determining microscopicallythe reflectance of vitrinite

CH-SNV, split beam microscopy

VSM 34130-1934
VSM 18653.1-1965
SN EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)

农业农村部, split beam microscopy

NY/T 3002-2016 Microscopy method for detection of animal-derived components in feed

国家质量监督检验检疫总局, split beam microscopy

SN/T 4693-2016 Determination of asbestos in daily latex consumer products by polarized light microscopy

ZA-SANS, split beam microscopy

SANS 6154:2006 Glass content of granulated metallurgical slag (transmitted-light microscopy method)
SANS 144:1982 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
SANS 7404-5:1994 Methods for the petrographic analysis of bituminous coal and anthracite Part 5: Method of determining microscopically the reflectance of vitrinite

Professional Standard - Coal, split beam microscopy

MT/T 594-1996 Method for determination of coal microcomponents by fluorescence spectrometry
MT/T 595-1996 Method for Determination of Fluorescence Intensity of Coal Microcomponents

SE-SIS, split beam microscopy

SIS SS-ISO 1463:1983 Meta I lic and oxide coatings - Measure- ment of coating thickness - Microscopi- cal method
SIS SS-ISO 9220:1989 Metallic coatings — Measurements of coating thickness — Scanning electron microscope method
SIS SS 11 11 15-1985 Steel - Method for assessing the slag inclusion content - Microscopic methods - Manual counting of particles and calculation of size-distribution

Lithuanian Standards Office , split beam microscopy

LST EN 14086-2003 Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam, DIN method
LST EN ISO 2128:2011 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010)
LST ISO 8672:2001 Air quality. Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy. Membrane filter method
LST EN ISO 9220:2001 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988)
LST EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
LST EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
LST EN ISO 8254-2:2003 Paper and board - Measurement of specular gloss - Part 2: 75° gloss with a parallel beam, DIN method (ISO 8254-2:2003)
LST EN ISO 8254-1:2009 Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss with a converging beam, TAPPI method (ISO 8254-1:2009)

Indonesia Standards, split beam microscopy

SNI ISO 10936-1:2008 Microscope for surgery - Part 1 : Specification and test method
SNI ISO 8254-1:2014 Paper and board – Measurement of specular gloss – Part 1: 75° gloss with a converging beam, TAPPI method
SNI ISO 10936-2:2008 Optic and optical instruments - Operation microscope - Part 2 : Light hazard from operation microscopes used in ocular surgery

AENOR, split beam microscopy

UNE-EN ISO 2128:2011 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010)
UNE-EN 14086:2003 Paper and board - Measurement of specular gloss - 45o gloss with a parallel beam, DIN method
UNE-EN ISO 9220:1996 METALLIC COATINGS. MEASUREMENT OF COATING THICKNESS. SCANNING ELECTRON MICROSCOPE METHOD. (ISO 9220:1988).
UNE-EN ISO 1463:2005 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
UNE-EN ISO 8254-1:2009 Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss with a converging beam, TAPPI method (ISO 8254-1:2009)

ES-UNE, split beam microscopy

UNE-EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
UNE-EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022)
UNE-EN ISO 8254-2:2016 Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method (ISO 8254-2:2016)
UNE-EN ISO 19749:2023 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021) (Endorsed by Asociación Española de Normalización in May of 2023.)
UNE-EN ISO 21363:2022 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020) (Endorsed by Asociación Española de Normalización in February of 2022.)
UNE-EN ISO 17751-1:2016 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 1: Light Microscopy method (ISO 17751-1:2016)

International Electrotechnical Commission (IEC), split beam microscopy

IEC 63145-20-10:2019 Eyewear display - Part 20-10: Fundamental measurement methods - Optical properties
IEC 63145-22-10:2020 Eyewear display - Part 22-10: Specific measurement methods for AR type - Optical properties
IEC 62906-5-3:2021 Laser display devices - Part 5-3: Measuring methods of image quality for laser projection display
IEC 62629-22-1:2013 3D display devices - Part 22-1: Measuring methods for autostereoscopic displays - Optical

Professional Standard - Petroleum, split beam microscopy

SY/T 6414-1999 Maceral analysis on polished surfaces of whole rocks

TIA - Telecommunications Industry Association, split beam microscopy

TIA/EIA-455-45-B-1992 FOTP-45 Method for Measuring Optical Fiber Geometry Using a Laboratory Microscope (Withdrawn May@ 2003)

CZ-CSN, split beam microscopy

CSN ISO 1463:1993 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method

Professional Standard - Nuclear Industry, split beam microscopy

EJ/T 20176-2018 Atomic Force Microscope Measuring Method of Edge Sharpness of Diamond Tool

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, split beam microscopy

GJB 5891.5-2006 Test method of loading material for initiating explosive device Part 5: Measurement of grain size Microscopy
GJB 5384.23-2005 Test methods of performance for pyrotechnic composition Part 23: Determination of particles size distribution for solid smoke particles Electron microscope method
GJB 5384.22-2005 Test methods of performance for pyrotechnic composition Part 21: Concentration determination of solid smoke particles quantities Electron microscope method

PH-BPS, split beam microscopy

PNS ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy

AT-ON, split beam microscopy

OENORM EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
OENORM EN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021)
OENORM EN ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)

未注明发布机构, split beam microscopy

BS 3406-4:1993(1999) Methods for determination of particle size distribution — Part 4 : Guide to microscope and image analysis methods
BS EN ISO 17751-1:2023 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends Part 1 : Light microscopy method
JIS K 0182:2023 Surface chemical analysis -- Scanning-probe microscopy -- Determination of cantilever normal spring constants
DIN EN ISO 21363:2022 Nanotechnologies – measurements of particle size and particle shape distributions using transmission electron microscopy

ES-AENOR, split beam microscopy

UNE 81-551-1989

CU-NC, split beam microscopy

NC 90-01-50-1987 Metrological Assurance. Instrumentation Microscopes Methods and Means of Verification

IT-UNI, split beam microscopy

UNI 6500-1969

Military Standard of the People's Republic of China-General Armament Department, split beam microscopy

GJB 8684.23-2015 Test methods for pyrotechnic properties - Part 23: Determination of particle size distribution of smoke solid particles by electron microscopy
GJB 8684.22-2015 Test methods for pyrotechnic properties - Part 22: Determination of smoke solid particle number concentration by electron microscopy

GOSTR, split beam microscopy

PNST 377-2019 Automobile roads of general use. Petroleum-based bitumen binders. The method for determining the distribution of the polymer using fluorescence microscopy
PNST 508-2020 Nanotechnologies. Single-wall carbon nanotubes. Characterization by scanning electron microscopy and energy dispersive X-ray spectrometry

未注明发布机构, split beam microscopy

BS 3406-4:1993(1999) Methods for determination of particle size distribution — Part 4 : Guide to microscope and image analysis methods
BS EN ISO 17751-1:2023 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends Part 1 : Light microscopy method
JIS K 0182:2023 Surface chemical analysis -- Scanning-probe microscopy -- Determination of cantilever normal spring constants
DIN EN ISO 21363:2022 Nanotechnologies – measurements of particle size and particle shape distributions using transmission electron microscopy

Canadian General Standards Board （CGSB), split beam microscopy

CAN/CGSB-4.2 NO.73.1-M91-1991 Textile Test Methods Wool - Determination of Percentage of Medullated Fibres by the Projection Microscope

YU-JUS, split beam microscopy

JUS ISO 7404-5:1992 Methods for the petrographic analysis of bituminous coal and anthracite. Part 5: Method of determining microscopically the reflectance of vitrinite