ZH
RU
ES

median particle size

median particle size, Total:334 items.

In the international standard classification, median particle size involves: Soil quality. Pedology, Petroleum products in general, Air quality, Construction equipment, Vocabularies, Optics and optical measurements, Fuels, Environmental protection, Particle size analysis. Sieving, Natural gas, Construction materials, Lubricants, industrial oils and related products, Hydraulic fluids, Medical equipment, Powder metallurgy, Quality, Welding, brazing and soldering, Analytical chemistry, Wastes, Power stations in general, TESTING, Physics. Chemistry, Tobacco, tobacco products and related equipment, Geology. Meteorology. Hydrology, Water quality, Protective equipment, Products of the textile industry, Fluid power systems, Products of the chemical industry, Animal feeding stuffs, Clothes, Microbiology.

Association Francaise de Normalisation, median particle size

NF X31-516:2007 Qualité du sol - Fractionnement granulodensimétrique des matières organiques particulaires du sol dans l'eau
NF X34-126*NF EN ISO 18846:2016 Solid biofuels - Determination of fines content in samples of pellets
NF X34-111*NF EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets
NF EN ISO 17829:2016 Biocombustibles solides - Détermination de la longueur et du diamètre des granulés
NF X43-276*NF EN 481:1993 Workplace atmospheres. Size fraction definitions for measurement of airborne particles.
XP CEN ISO/TS 19590:2019 Nanotechnologies - Distribution granulométrique et concentration de nanoparticules inorganiques en milieu aqueux par spectrométrie de masse à plasma induit en mode particule unique
NF EN ISO 18847:2016 Biocombustibles solides - Détermination de la masse volumique unitaire des granulés et des briquettes
NF EN ISO 20023:2018 Biocombustibles solides - Sécurité des granulés biocombustibles solide - Manutention et stockage en toute sécurité des granulés de bois dans les applications résidentielles et autres applications à petite échelle
NF EN ISO 18846:2016 Biocombustibles solides - Détermination de la teneur en fines dans les quantités de granulés
NF EN ISO 18562-2:2020 Évaluation de la biocompatibilité des voies de gaz respiratoires dans les applications de soins de santé - Partie 2 : essais concernant les émissions de matières particulaires
NF X34-240*NF EN ISO 20023:2018 Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage of wood pellets in residential and other small-scale applications
NF X43-404-34*NF ISO 16000-34:2019 Indoor air - Part 34 : strategies for the measurement of airborne particles
NF V37-026*NF ISO 10315:2022 Cigarettes - Determination of nicotine in total particulate matter from the mainstream smoke - Gas-chromatographic method
NF EN ISO 13138:2012 Qualité de l'air - Conventions de prélèvement de particules aéroportées en fonction de leur dépôt dans les voies respiratoires humaines
NF ISO 10315:2022 Cigarettes - Dosage de la nicotine dans la matière particulaire totale du courant principal de fumée - Méthode par chromatographie en phase gazeuse
NF X06-110-2*NF ISO 11648-2:2001 Statistical aspects of sampling from bulk materials - Part 2 : sampling of particulate materials
NF ISO 10362-1:2020 Cigarettes - Dosage de l'eau dans la matière particulaire totale du courant principal de fumée - Partie 1 : méthode par chromatographie en phase gazeuse
NF V37-011-1*NF ISO 10362-1:2020 Cigarettes - Determination of water in total particulate matter from the mainstream smoke - Part 1 : gas-chromatographic method
NF X43-905:2016 Biomonitoring of air - Passive biomonitoring of atmospheric mineral contaminants in particulate deposits on conifer needles
NF ISO 11277:2020 Qualité du sol - Détermination de la répartition granulométrique de la matière minérale des sols - Méthode par tamisage et sédimentation
NF ISO 22253:2019 Cigarettes - Dosage de la nicotine dans la matière particulaire totale provenant du courant principal de fumée avec un régime de fumage intense - Méthode par chromatographie en phase gazeuse
NF T70-328:1995 Energetic materials for defense. Physical-chemical analysis and properties. Grit particle of high explosives.
NF EN ISO 21483:2018 Détermination de la solubilité dans l'acide nitrique du plutonium des pastilles (U, Pu) O2 de combustibles d'oxydes mixtes non irradiés
NF V37-204*NF ISO 22253:2019 Cigarettes - Determination of nicotine in total particulate matter from the mainstream smoke with an intense smoking regime - Gas-chromatographic method
NF X34-241*NF EN ISO 20024:2020 Solid biofuels - Safe handling and storage of solid biofuel pellets in commercial and industrial applications
NF EN ISO 20024:2020 Biocombustibles solides - Manutention et stockage en toute sécurité des granulés de biocombustibles solides dans des applications commerciales et industrielles
NF EN 14902:2005 Qualité de l'air ambiant - Méthode normalisée pour la mesure du plomb, cadmium, de l'arsenic et du nickel dans la fraction MP10 de la matière particulaire en suspension
NF S95-189-2*NF EN ISO 18562-2:2020 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2 : tests for emissions of particulate matter
NF X43-026*NF EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter.
NF X44-014-5*NF EN ISO 29463-5:2022 High-efficiency filters and filter media for removing particles in air - Part 5 : test method for filter elements
NF V37-046*NF ISO 18144:2004 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Method based on solanesol.
NF EN ISO 29463-5:2022 Filtres à haut rendement et filtres pour l'élimination des particules dans l'air - Partie 5 : méthode d'essai des éléments filtrants
NF EN ISO 29463-3:2018 Filtres à haut rendement et filtres pour l'élimination des particules dans l'air - Partie 3 : méthode d'essai des filtres à feuille plate

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, median particle size

GB/T 22231-2008 Particle Size Distribution/Fiber Length and Diameter Distribution
GB/T 42208-2022 Nanotechnologies—Measurement of nanoparticle size in multiphase system—Image method of transmission electron microsopy
GB/T 27893-2011 Natural gas.Determination of particles content.Gravimetric method
GB 11667-1989 Hygienic standard for inhalable particles in ambient air of residential areas
GB/T 21452-2008 Petroleum products.Determination of particulate content of middle distillate fuels.Laboratory filtration method
GB/T 16157-1996 The determination of particulates and sampling methods of gaseous pollutants emitted from exhaust gas of stationary source

SAE - SAE International, median particle size

SAE ARP598A-1969 The Determination of Particulate Contamination in Liquids by the Particle Count Method
SAE ARP598B-1986 Determination of Particulate Contamination in Liquids by the Particle Count Method
SAE ARP4285A-2018 Aerospace - Evaluation of Particulate Contamination in Hydraulic Fluid - Membrane Procedure

German Institute for Standardization, median particle size

DIN SPEC 51455:2018 Liquide petroleum products - Determination of particle number and particle size in oils
DIN EN ISO 17829:2016-03 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015); German version EN ISO 17829:2015
DIN EN ISO 18846:2016 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)
DIN 51813:2022 Testing of lubricants - Determination of the content of foreign solid matters in lubricating greases - Particle sizes above 25 ？m
DIN EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
DIN EN ISO 18846:2016-12 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016); German version EN ISO 18846:2016 / Note: To be replaced by DIN EN ISO 5370 (2022-03).
DIN EN ISO 18562-2:2022-12 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter (ISO/DIS 18562-2:2022); German and English version prEN ISO 18562-2:2022 / Note: Date of issue 2022-11-18*Intended as r...
DIN EN ISO 18562-2:2020-05 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter (ISO 18562-2:2017); German version EN ISO 18562-2:2020 / Note: To be replaced by DIN EN ISO 18562-2 (2022-12).
DIN EN ISO 20023:2019-04 Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage of wood pellets in residential and other small-scale applications (ISO 20023:2018); German version EN ISO 20023:2018
DIN EN 12457-2:2003 Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-2:2002
DIN EN 12457-1:2003 Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 1: One stage batch test at a liquid to solid ration of 2 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-1:2002
DIN CEN/TS 15439:2006-08 Biomass gasification - Tar and particles in product gases - Sampling and analysis; German version CEN/TS 15439:2006
DIN EN 12457-4:2003 Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with limited size redu
DIN EN ISO 20023:2019 Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage of wood pellets in residential and other small-scale applications (ISO 20023:2018)
DIN EN ISO 20023:2017 Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage of wood pellets in residential and other small-scale applications (ISO/DIS 20023:2017); German and English version prEN ISO 20023:2017
DIN ISO 10362-1:2021-02 Cigarettes - Determination of water in total particular matter from the mainstream smoke - Part 1: Gas-chromatographic method (ISO 10362-1:2019)
DIN ISO 16000-34:2019 Indoor air - Part 34: Strategies for the measurement of airborne particles (ISO 16000-34:2018)
DIN EN ISO 13982-1:2011-02 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004 + Amd. 1:2010); Ger...
DIN ISO 2889 Beiblatt 1:2012-10 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities - Supplement 1: Distribution of activity via the diameter of aerosol particles
DIN EN 14243-2:2019-05 Materials obtained from end of life tyres - Part 2: Granulates and powders - Methods for determining the particle size distributions and impurities, including free steel and free textile content; German version EN 14243-2:2019
DIN 51813:2022-08 Testing of lubricants - Determination of the content of foreign solid matters in lubricating greases - Particle sizes above 25 µm
DIN EN ISO 20024:2020-09 Solid biofuels - Safe handling and storage of solid biofuel pellets in commercial and industrial applications (ISO 20024:2020); German version EN ISO 20024:2020
DIN EN 14902 Berichtigung 1:2007-01 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005, Corrigenda to DIN EN 14902:2005-10; German version EN 14902:2005/AC:2006
DIN EN 14902:2005-10 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005
DIN EN 12457-3:2021 Characterization of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content with particle size below 4 mm
DIN EN 12457-3:2003 Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content with particle size below 4 mm (
DIN EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; English version of DIN EN 14902
DIN ISO 10362-1:2021 Cigarettes - Determination of water in total particular matter from the mainstream smoke - Part 1: Gas-chromatographic method (ISO 10362-1:2019)
DIN EN ISO 20024:2020 Solid biofuels - Safe handling and storage of solid biofuel pellets in commercial and industrial applications (ISO 20024:2020)

Society of Automotive Engineers (SAE), median particle size

SAE ARP598B-1991 THE DETERMINATION OF PARTICULATE CONTAMINATION IN LIQUIDS BY THE PARTICLE COUNT METHOD
SAE ARP4285-2008 Aerospace - Evaluation of Particulate Contamination in Hydraulic Fluid - Membrane Procedure
SAE ARP785-1963 PROCEDURE FOR THE DETERMINATION OF PARTICULATE CONTAMINATION IN HYDRAULIC FLUIDS BY THE CONTROL FILTER GRAVIMETRIC PROCEDURE
SAE ARP785B-2020 Procedure for the Determination of Particulate Contamination in Hydraulic Fluids by the Control Filter Gravimetric Procedure
SAE ARP785A-2002 Aerospace - Procedure for the Determination of Particulate Contamination in Hydraulic Fluids by the Control Filter Gravimetric Procedure

Association of German Mechanical Engineers, median particle size

VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
VDI 2463 Blatt 4-1976 Particulate matter measurement; Measurement of particulate matter in ambient air; LIB-filter method
VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
VDI 3491 Blatt 1-1980 Particulate matter measurement; characteristics of suspended particulate matter in gases; terms and definitions
VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer
VDI 2268 Blatt 3-1988 Chemical analysis of particulate matter; determination of thallium in particulate emissions by atomic absorption spectrometry
VDI 2066 Blatt 5-1994 Particulate matter measurement - Dust measurement in flowing gases; particle size selective measurement by impaction method - Cascade impactor
VDI 2463 Blatt 1-1999 Particulate matter measurement - Gravimetric determination of mass concentration of suspended particulate matter in ambient air - General principles
VDI 2268 Blatt 1-1987 Chemical analysis of particulate matter; determination of Ba, Be, Cd, Co, Cr, Cu, Ni, Pb, Sr, V, Zn in particulate emissions by atomic spectrometric methods
VDI 3867 Blatt 1-2009 Measurement of particulate matter in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Fundamentals
VDI 3867 Blatt 6-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical Low Pressure Impactor (ELPI)
VDI 2463 Blatt 7-2014 Particulate matter measurement - Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS)
VDI 2463 Blatt 8-2014 Particulate matter measurement - Determination of suspended particulate matter in ambient air and indoor air - Non-fractioning sampling system for low-volume samplers (LVS)
VDI 2267 Blatt 2-1983 Determination of suspended particulates in ambient air; measurement of lead by X-ray fluorescence
VDI 3491 Blatt 8-1989 Particulate matter measurement; generation of test aerosols from powders using a belt feed unit
VDI 2066 Blatt 1-2006 Particulate matter measurement - Dust measurement in flowing gases - Gravimetric determination of dust load
VDI 2463 Blatt 11-1996 Particulate matter measurement - Measurement of mass concentration in ambient air - Filter method; Digitel DHA-80 filter changer
VDI 2463 Blatt 7-1982 Particulate matter measurement; measurement of mass concentration in ambient air; filter method; small filter device GS 050
VDI 2264-2001 Commissioning, operation and maintenance of separator systems for the removal of gaseous and particulate substances from gas streams
VDI 2463 Blatt 8-1982 Particulate matter measurement; measurement of mass concentration in ambient air; standard method for the comparsion of nonfractionating methods
VDI 3491 Blatt 10-1990 Particulate matter measurement; generation of test aerosols from fibrous powders using a vibrating bed aerosol generator
VDI 2268 Blatt 4-1990 Chemical analysis of particulate matter; determination of arsenic, antimony and selenium in dust emissions by graphite-furnace atomic absorption spectrometry

Professional Standard - Construction Industry, median particle size

JG/T 5089-1997 Determination of solid particulate contaminant in fluids by the automatic particle counting method
JG/T 70-1999 Microscope count method for solid particle filth in oil liquid
JG/T 5066-1996 Determination of solid particulate contaminant in fluids by the gravimetric method

European Committee for Standardization (CEN), median particle size

EN ISO 5370:2023 Solid biofuels - Determination of fines content in pellets (ISO 5370:2023)
EN ISO 17829:2015 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis
EN 12457-4:2002 Characterisation of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
EN ISO 21832:2020 Workplace air - Metals and metalloids in airborne particles - Requirements for evaluation of measuring procedures (ISO 21832:2018)
EN ISO 20024:2020 Solid biofuels - Safe handling and storage of solid biofuel pellets in commercial and industrial applications (ISO 20024:2020)
CWA 17253-1:2018 Joint implants - Part 1: Novel methods for isolating wear particles from joint replacements and related devices
EN ISO 18562-2:2020 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter (ISO 18562-2:2017)

International Organization for Standardization (ISO), median particle size

ISO 5370:2023 Solid biofuels — Determination of fines content in pellets
ISO/FDIS 18562-2:2014 Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 2: Tests for emissions of particulate matter
ISO 20023:2018 Solid biofuels — Safety of solid biofuel pellets — Safe handling and storage of wood pellets in residential and other small-scale applications
ISO 16000-34:2018 Indoor air - Part 34: Strategies for the measurement of airborne particles
ISO 20290-1:2021 Aggregates for concrete - Test methods for mechanical and physical properties - Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption
ISO 10882-1:2001 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles
ISO 10362-1:2019 Cigarettes — Determination of water in total particulate matter from the mainstream smoke — Part 1: Gas-chromatographic method
ISO 15167:1999 Petroleum products - Determination of particulate content of middle distillate fuels - Laboratory filtration method
ISO 22253:2019 Cigarettes — Determination of nicotine in total particulate matter from the mainstream smoke with an intense smoking regime — Gas-chromatographic method
ISO 21832:2018 Workplace air - Metals and metalloids in airborne particles - Requirements for evaluation of measuring procedures
ISO/DIS 18562-2 Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 2: Tests for emissions of particulate matter
ISO 20024:2020 Solid biofuels — Safe handling and storage of solid biofuel pellets in commercial and industrial applications
ISO 18562-2:2017 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter
ISO 11174:2023 Workplace air — Determination of particulate cadmium and cadmium compounds — Flame and electrothermal atomic absorption spectrometric method

American Society of Mechanical Engineers (ASME), median particle size

ASME PTC 38-1980(R1985) Determining the Concentration of Particulate Matter in A Gas Stream
ASME PTC 38-1980 Determining the Concentration of Particulate Matter in a Gas Stream

Korean Agency for Technology and Standards (KATS), median particle size

KS M ISO 18846:2021 Solid biofuels — Determination of fines content in samples of pellets
KS M ISO 17829:2021 Solid Biofuels — Determination of length and diameter of pellets
KS B 3278-1992
KS H ISO 10362-1:2020 Cigarettes — Determination of water in total particulate matter from the mainstream smoke — Part 1: Gas-chromatographic method
KS I 2209-2008 Form, size and performance testing methods of filtration media for collecting airborne particulate matters
KS I ISO 8518-2006(2017) Workplace air－Determination of particulate lead and lead compounds(Flame electrothermal atomic absorption spectrometric method)
KS I ISO 16740-2007(2017) Workplace air－Determination of hexavalent chromium in airborne particulate matter－Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
KS I ISO 30011-2012(2017) Workplace air－Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry

KR-KS, median particle size

KS M ISO 18846-2021 Solid biofuels — Determination of fines content in samples of pellets
KS M ISO 17829-2021 Solid Biofuels — Determination of length and diameter of pellets
KS B 5645-2018(2023) Automatic moniters for suspended particulate matter in ambient air
KS H ISO 10315-2022 Cigarettes — Determination of nicotine in total particulate matter from the mainstream smoke — Gas-chromatographic method
KS H ISO 10362-1-2020 Cigarettes — Determination of water in total particulate matter from the mainstream smoke — Part 1: Gas-chromatographic method
KS I ISO 30011-2022 Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
KS I ISO 16740-2022 Workplace air Determination of hexavalent chromium in airborne particulate matter Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide

API - American Petroleum Institute, median particle size

API 922-1961 REMOVAL OF PARTICULATE MATTER FROM GASEOUS WASTES FILTRATION
API 4348-1982 ELEMENTS OF AIRBORNE PARTICLE BEHAVIOR IN THE UNITED STATES
API 26-60070- AIR QUALITY MONOGRAPHS Monograph #75-23 Gaseous and Particulate Sulfur Compounds in Urban Atmospheres

NATO - North Atlantic Treaty Organization, median particle size

AFLP-3713-2014 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE ANALYSER (ED A@ Ver 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (
STANAG 3713-1990 Determination of Particulate Matter in Aerospace Hydraulic Fluids Using a Particle Size Analyser (ED 3 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +

Lithuanian Standards Office , median particle size

LST EN 16127-2012 Solid biofuels - Determination of length and diameter of pellets
LST EN ISO 13982-1:2005 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004)
LST EN 14902-2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
LST EN 14902-2005/AC-2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
LST EN ISO 13982-1:2005/A1:2011 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) - Amendment 1 (ISO 13982-1:2004/Amd.1:20
LST EN 12457-1-2003 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (withou

Danish Standards Foundation, median particle size

DS/EN 16127:2012 Solid biofuels - Determination of length and diameter of pellets
DS/CEN/TS 15439:2007 Biomass gasification - Tar and particles in product gases - Sampling and analysis
DS/ISO 10315:2021 Cigarettes – Determination of nicotine in total particulate matter from the mainstream smoke – Gas-chromatographic method
DS/EN 14902/AC:2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
DS/EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
DS/EN 12457-1:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (withou

GOSTR, median particle size

GOST 34089-2017 Solid biofuel. Determination of length and diameter of pellets
GOST R ISO 16000-34-2020 Indoor air. Part 34. Strategies for the measurement of airborne particles

ES-UNE, median particle size

UNE-EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
UNE-EN ISO 18562-2:2020 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter (ISO 18562-2:2017) (Endorsed by Asociación Española de Normalización in April of 2020.)
UNE-EN ISO 20023:2020 Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage of wood pellets in residential and other small-scale applications (ISO 20023:2018)
UNE-EN ISO 5370:2023 Solid biofuels - Determination of fines content in pellets (ISO 5370:2023)
UNE-EN 14243-2:2019 Materials obtained from end of life tyres - Part 2: Granulates and powders - Methods for determining the particle size distribution and impurities, including free steel and free textile content
UNE-EN ISO 20024:2021 Solid biofuels - Safe handling and storage of solid biofuel pellets in commercial and industrial applications (ISO 20024:2020)
UNE-EN 14902:2006/AC:2006 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter

RU-GOST R, median particle size

GOST 33399-2015 Testing of chemicals of environmental hazard. Determination of the particle size distribution/determination of the fibre length and diameter distribution. Method A: Particle size distribution (effective hydrodynamic radius). Method B: Fibre length and dia
GOST R EN ISO 13982-1-2009 Occupational safety standards system. Protective clothing for use against solid particulates. Part 1. Performance requirements for chemical protective clothing providing protection to full body against airborne solid particulates (type 5 clothing)

American Society for Testing and Materials (ASTM), median particle size

ASTM D1888-78e1 Methods of Test for Particulate and Dissolved Matter in Water
ASTM C123/C123M-14 Standard Test Method for Lightweight Particles in Aggregate
ASTM B930-03 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2008) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2012) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM D3685/D3685M-13(2021) Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
ASTM D6786-02 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM D6786-07 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM E872-82(1998) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
ASTM E872-82(2019) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
ASTM D4600-95(2016) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM E2834-12 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM D3268-91(2000)e1 Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
ASTM D3268-91(2018) Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
ASTM D4600-22 Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM D6494-99 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM D6494-99(2004)e1 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM D6650-01 Standard Test Method for Determining the Dynamic Wiping Efficiency, Wet Particle Removal Ability, and Fabric Particle Contribution of Nonwoven Fabrics Used in Cleanrooms
ASTM D8108-21 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D8108-20 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D4600-95(2005) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM D4600-95(2010) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM D8358-21 Standard Guide for Assessment and Inclusion of Wall Deposits in the Analysis of Single-Stage Samplers for Airborne Particulate Matter
ASTM D4600-95(2000)e1 Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM D5452-08 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D8108-21e1 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D6986-03(2016) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
ASTM D5452-05 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D5452-12 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D7650-21 Standard Practice for Sampling of Particulate Matter in High Pressure Gaseous Fuels with an In-Stream Filter
ASTM D4096-17 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
ASTM D4096-17(2017) Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
ASTM D6986-03(2020) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
ASTM D4096-91(1997)e1 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)
ASTM E2558-07 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
ASTM D6217-10 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D6217-11 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D6494-22 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM D7650-13 Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter
ASTM D4860-07 Standard Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Numerical Rating)
ASTM D6494-99(2010) Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM D6494-99(2015) Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM F318-78(1996) Standard Practice for Sampling Airborne Particulate Contamination in Clean Rooms for Handling Aerospace Fluids
ASTM D7439-21 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
ASTM F51-00(2002)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM F51/F51M-20 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM D7439-14 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasmandash;Mass Spectrometry
ASTM D8166-21a Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Condition Monitors
ASTM D8166-21 Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters
ASTM D8166-22 Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Particle Contamination Monitors
ASTM D8166-17 Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters
ASTM D6831-05a Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-05 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM F25/F25M-21 Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas

Institute of Environmental Sciences and Technology, median particle size

IEST G-CC1002-1999 Determination of the Concentration of Airborne Ultrafine Particles

AENOR, median particle size

UNE-EN ISO 18846:2017 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)
UNE 51115:1985 PARTICULATE CONTAMINANT IN AVIATION TURBINE FUELS, TESTS FOR
UNE-EN 481:1995 WORKPLACE ATMOSPHERES. SIZE FRACTION DEFINITIONS FOR MEASUREMENT OF AIRBORNE PARTICLES.
UNE-EN ISO 13982-1:2005 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004)
UNE 81587:2017 Workplace exposure. Determination of metals and metalloids in airborne particles. Atomic Spectrometry method.
UNE-EN 14902:2006 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
UNE-EN ISO 13982-1:2005/A1:2011 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) - Amendment 1 (ISO 13982-1:2004/AM 1:201
UNE-EN 12457-1:2003 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (withou
UNE 51132:1985 FREE WATER AND PARTICULATE CONTAMINATION IN DISTILLATE FUELS (CLEAR AND BRIGHT PASS/FAIL PROCEDURE). TEST FOR
UNE 81599:2014 Workplace exposure. Determination of airborne particles (inhalable, thoracic and respirable fractions). Gravimetric method.

CL-INN, median particle size

INDITECNOR 30-37ch-1954

Group Standards of the People's Republic of China, median particle size

T/CAEPI 27-2020 Technical requirement for agglomeration equipment of flue gas particles
T/CIECCPA 048-2023 Test method for condensable particulate matter in flue gas of coal-fired power plant — Impinger method
T/ACEF 081-2023 Fixedwing general aviation platforms Technical guidance for airbornein-situ measurement of atmospheric particulate matters

Japanese Industrial Standards Committee (JISC), median particle size

JIS B 7954:2001 Automatic monitors for suspended particulate matter in ambient air
JIS B 7954:1988 Automatic moniters for suspended particulate matter in ambient air
JIS Z 8813:1994 Measuring methods for suspended particulate matter concentration in air-general requirements

Professional Standard - Energy, median particle size

NB/SH/T 6072-2023 Filtration of Particulate Contaminants in Lubricating Oils

North Atlantic Treaty Organization Standards Agency, median particle size

STANAG 3713-2008 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE SIZE ANALYSER

中华人民共和国国家卫生和计划生育委员会, median particle size

GB/T 17095-1997 Hygienic standard for inhalable particulate matter in indoor air
WS/T 206-2001 Method for determination of inhalabnle particulate matter (PM10) in air of public place----Light scattering method

British Standards Institution (BSI), median particle size

BS ISO 16000-34:2018 Indoor air. Strategies for the measurement of airborne particles
BS EN ISO 18562-2:2020 Biocompatibility evaluation of breathing gas pathways in healthcare applications. Tests for emissions of particulate matter
BS EN ISO 5370:2023 Solid biofuels. Determination of fines content in pellets
BS EN ISO 20023:2018 Solid biofuels. Safety of solid biofuel pellets. Safe handling and storage of wood pellets in residential and other small-scale applications
DD CEN/TS 15439:2006 Biomass gasification. Tar and particles in product gases. Sampling and analysis
BS ISO 11648-2:2001 Statistical aspects of sampling from bulk materials - Sampling of particulate materials
BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
22/30427608 DC BS EN ISO 5370. Solid biofuels. Determination of fines content in pellets
22/30441401 DC BS EN ISO 18562-2. Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2. Tests for emissions of particulate matter
BS ISO 10362-1:2019 Tracked Changes. Cigarettes. Determination of water in total particulate matter from the mainstream smoke. Gas-chromatographic method
20/30414922 DC BS ISO 10315. Cigarettes. Determination of nicotine in total particulate matter from the mainstream smoke. Gaschromatographic method
BS ISO 10315:2021 Tracked Changes. Cigarettes. Determination of nicotine in total particulate matter from the mainstream smoke. Gas-chromatographic method
BS ISO 18562-2:2017 Biocompatibility evaluation of breathing gas pathways in healthcare applications. Tests for emissions of particulate matter
BS ISO 21018-4:2016 Hydraulic fluid power. Monitoring the level of particulate contamination in the fluid. Use of the light extinction technique
BS EN 12457-4:2002 Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
BS ISO 22253:2019 Cigarettes. Determination of nicotine in total particulate matter from the mainstream smoke with an intense smoking regime. Gas-chromatographic method
BS EN ISO 20024:2020 Solid biofuels. Safe handling and storage of solid biofuel pellets in commercial and industrial applications
BS EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, AS, and Ni in the PM 10 fraction of suspended particulate matter
BS EN 14902:2005(2009) Ambient air quality - Standard method for the measurement of Pb, Cd, AS, and Ni in the PM 10 fraction of suspended particulate matter
BS ISO 15592-3:2009 Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis. Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and ni
BS ISO 15592-3:2008 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and
BS EN 12457-2:2002 Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
19/30342461 DC BS EN ISO 20024. Solid biofuels. Safe handling and storage of solid biofuel pellets in commercial and industrial applications
BS ISO 15202-1:2012 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sampling
PD ISO/TS 21396:2017 Rubber. Determination of mass concentration of tire and road wear particles (TRWP) in soil and sediments. Pyrolysis-GC/MS method

CZ-CSN, median particle size

CSN 65 6220-1984 Oils. Determination of particulate contaminant on membrane filter
CSN 72 1565 Cast.3-1985 Testing of brick clays. Determination of the grain size by screen analysis. Orientation mineralogical and petrographical description of the plus mesh
CSN 46 7092-32-1998 Testing methods for feeding stuffs - Part 32: Determination of the adipose particles size in milk feeding mixtures

VE-FONDONORMA, median particle size

NORVEN 76-18-1965

Professional Standard - Agriculture, median particle size

339兽药国家标准化学药品、中药卷第一册-2013 The second part of traditional Chinese medicine preparations and extracts Xiakang granules
空气和废气监测分析方法 7.2.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources—Classification of Particulate Matter Pollutio
BJY 202304:2023 Supplementary testing methods for inspection items of Scutellaria baicalensis extract in Xiaobuihu granules
空气和废气监测分析方法 7.5.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter
空气和废气监测分析方法 7.2.2-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources 2 Other Classification Methods
空气和废气监测分析方法 7.5.2-2003 Part Seven Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter
GB/T 16157-1996(XG1-2018) "Determination of Particulate Matter in Exhaust from Stationary Pollution Sources and Sampling Methods of Gaseous Pollutants" Amendment No. 1
空气和废气监测分析方法 7.2.3-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources Three-source Sample Collection Methods
空气和废气监测分析方法 7.5.4-2003 Part Seven Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particles Chapter Five Particle Composition Spectrum Establishment Four Source and Receptor Composition Spectrum Data Evaluation
空气和废气监测分析方法 7.5.3-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 5 Establishment of Particulate Matter Composition Spectrum Three Sources and Receptor Chemical Composition Scope
空气和废气监测分析方法 7.2.4-2003 Part Seven Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter Two Atmospheric Particulate Matter Emission Source Sample Collection Four-source Sample Processing Methods

Standard Association of Australia （SAA）, median particle size

AS 1141.32:2008 Methods for sampling and testing aggregates - Weak particles (including clay lumps, soft and friable particles) in coarse aggregates
AS 3853.1:2006 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator?s breathing zone - Sampling of airborne particles
AS 3580.9.7:1990 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) dichotomous sampler - Gravimetric method
AS 4002.2:2001 Hydraulic fluid power - Particulate contamination of systems - Extraction of fluid samples from an operating system

PT-IPQ, median particle size

Professional Standard - Commodity Inspection, median particle size

SN/T 4059-2014 Determination of magnetic metal particles in paprika condiment for export

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., median particle size

ASHRAE 4346-2000 Effects of Improved Residential Furnace Filtration on Airborne Particles
ASHRAE OR-16-C023-2016 Evaluating Air-side Economizer Use in Particulate Air Pollution in Office Buildings in Multi-million Cities
ASHRAE 4606-2003 Validation of a CFD Model for Temperature and Particulate Concentration in a Test Room with Mixed Air and Displacement Ventilation

CEN - European Committee for Standardization, median particle size

EN ISO 20023:2018 Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage of wood pellets in residential and other small-scale applications
PD CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis

Professional Standard - Electricity, median particle size

DL/T 1520-2016 Specifications for fine particles(PM2.5)monitoring in the thermal power plants-gravimetric method
DL/T 2091-2020 Test method for condensable particulate matter in flue gas of coal-fired power plants dry impact bottle method

Anhui Provincial Standard of the People's Republic of China, median particle size

DB34/T 392-2004 Test method for laser determination of inhalable particulate matter in indoor air

Professional Standard - Civil Aviation, median particle size

MH/T 6068-2010 Standard test method for free water, particulate and other contamination in aviation fuel-Field inspection procedures
MH/T 6068-2017 Standard test method for free water, particulate and other contamination in aviation fuels.Field inspection procedures

American Welding Society (AWS), median particle size

AWS F1.4-1997 Methods for Analysis of Airborne Particulates Generated by Welding and Allied Processes

国家市场监督管理总局、中国国家标准化管理委员会, median particle size

GB/T 37167-2018 Particle—Separation and measurement of trace magnetic materials(elements) in inorganic powder

Guangdong Provincial Standard of the People's Republic of China, median particle size

DB44/T 924-2011 Test Method for Free Water and Particulate Contaminants in Distillate Fuels Visual Method

Professional Standard - Ocean, median particle size

HY/T 133-2010 Determination of spectral absorption coefficient of particles and dissolved material for seawater-Spectrophotometry

ZA-SANS, median particle size

SANS 6241:2006 Particle size distribution of material of diameter smaller than 75 ?m in fine aggregate (hydrometer method)
SANS 6244:2006 Particles of diameter not exceeding 20 ?m and not exceeding 5 ?m and smaller, respectively, in fine aggregate (pipette method)

Canadian General Standards Board （CGSB), median particle size

CGSB 115.10-M90-CAN/CGSB-1990 Disposable Air Filters for the Removal of Particulate Matter from Ventilating Systems
CGSB 115.14-M91-CAN/CGSB-1991 High Efficiency Cartridge Type Supported Air Filters for the Removal of Particulate Matter from Ventilating Systems
CGSB 115.15-M91-CAN/CGSB-1991 Filtres A Air De Type Rigide, A Rendement Eleve, Eliminant Les Particules Solides Des Systemes De Ventilation
CGSB 176.2 NO.1-96-CAN/CGSB-1996 Methodes D'Echantillonnage Et D'Essai Du Tabac Determination Du Benzo (a)Pyrene Dans La Matiere Particulaire Totale De La Fumee De Tabac

IN-BIS, median particle size

American National Standards Institute （ANSI), median particle size

ANSI/ASTM D5452:2012 Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration

Professional Standard - Environmental Protection, median particle size

HJ 1133-2020 Determination of arsenic, selenium, bismuth and antimony in ambient air and exhaust gas particulate matter by atomic fluorescence method
HJ 1100-2020 Technical guidelines for automatic monitoring of particulate matter (PM10 and PM2.5) in ambient air by β-ray method
HJ 1271-2022 Ambient Air—Determination of formic acid, acetic acid and oxalic acid in particulate matter—Ion chromatography
HJ 830-2017 Ambient air -Determination of inorganic elements in ambient particle matter- Wavelength dispersive X-ray fluorescence spectroscopy (WD-XRF) method
HJ 829-2017 Ambient air -Determination of inorganic elements in ambient particle matter- Energy dispersive X-ray fluorescence spectroscopy (ED-XRF) method
HJ 646-2013 Ambient air and stationary source emissions.Determination of gas and particle-phase polycyclic aromatic hydrocarbons with gas chromatography/mass spectrometry
HJ 647-2013 Ambient air and stationary source emissions.Determination of gas and particle-phase polycyclic aromatic hydrocarbons.High performance liquid chromatography
HJ 800-2016 Ambient air-Determination of the water soluble cations(Li+、Na+、NH4+、K+、Ca2+、Mg2+) from atmospheric particles-Ion chromatography
HJ 657-2013 Ambient air and stationary source emission.Determination of metals in ambient particulate matter.Inductively coupled plasma/mass spectrometry (ICP-MS)
HJ 777-2015 Ambient air and waste gas from stationary sources emission -Determination of metal elements in ambient particle matter-Inductively coupled plasma optical emission spectrometry
HJ 799-2016 Determination of water-soluble anions (F-, Cl-, Br-, NO2-, NO3-, PO43-, SO32-, SO42-) in ambient air particulate matter by ion chromatography

未注明发布机构, median particle size

SAE ARP785A-1996 Procedure for the Determination of Particulate Contamination in Hydraulic Fluids by the Control Filter Gravimetric Procedure
BS ISO 11174:1996(1998) Workplace air — Determination of particulate cadmium and cadmium compounds — Flame and electro - thermal atomic absorption spectrometric method

Canadian Standards Association (CSA), median particle size

CSA ISO 20023:2021 Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage of wood pellets in residential and other small-scale applications (Adopted ISO 20023:2018, first edition, 2018-10)

IT-UNI, median particle size

UNI EN ISO 20024:2021 Solid biofuels - Safe handling and storage of solid biofuel pellets in commercial and industrial applications

Shandong Provincial Standard of the People's Republic of China, median particle size

DB37/T 3461-2018 Determination of Copper and Zinc in Waste Gas Particulates from Stationary Pollution Sources in Shandong Province by Flame Atomic Absorption Spectrophotometry
DB37/T 3459-2018 Determination of Copper and Zinc in Waste Gas Particulates from Stationary Pollution Sources in Shandong Province by Inductively Coupled Plasma Mass Spectrometry
DB37/T 3460-2018 Determination of Copper in Waste Gas Particulates from Stationary Pollution Sources in Shandong Province Graphite Furnace Atomic Absorption Spectrophotometry

Heilongjiang Provincial Standard of the People's Republic of China, median particle size

DB23/T 2076-2018 Determination of Pb, Cd and As elements in ambient air fine particulate matter (PM2.5) by wavelength dispersive-X-ray fluorescence spectrometry