ZH
RU
ES

Stabilizer

Stabilizer, Total:500 items.

In the international standard classification, Stabilizer involves: Acoustics and acoustic measurements, Linear and angular measurements, Pharmaceutics, Road engineering, Equipment for the paper industry, Medical equipment, Analytical chemistry, Tobacco, tobacco products and related equipment, Coals, Textile machinery, Laboratory medicine, Equipment for petroleum and natural gas industries, Plant and equipment for the food industry, Measurement of volume, mass, density, viscosity, Construction equipment, Mining equipment, Equipment for the chemical industry, Transport, Telecontrol. Telemetering, Metrology and measurement in general, Paint ingredients, Cereals, pulses and derived products, Equipment for the rubber and plastics industries, Paper and board, Geology. Meteorology. Hydrology, Products of the chemical industry, Rubber, Installations in buildings, Terminology (principles and coordination), Hydraulic energy engineering, Radiation measurements, Diagnostic, maintenance and test equipment, Water quality, Measurement of fluid flow, Thermodynamics and temperature measurements, Commercial vehicles, Fuels, Non-destructive testing, Plastics, Optics and optical measurements, Mechanical testing, Vocabularies, Radiocommunications, Dentistry, Road vehicles in general, Nuclear energy engineering, Milk and milk products, Shipbuilding and marine structures in general, General methods of tests and analysis for food products, Characteristics and design of machines, apparatus, equipment, Welding, brazing and soldering, Heat recovery. Thermal insulation, Soil quality. Pedology, Crude petroleum, Paints and varnishes.


Group Standards of the People's Republic of China, Stabilizer

National Metrological Verification Regulations of the People's Republic of China, Stabilizer

Professional Standard - Machinery, Stabilizer

Professional Standard - Light Industry, Stabilizer

工业和信息化部, Stabilizer

Professional Standard - Agriculture, Stabilizer

Professional Standard - Traffic, Stabilizer

Professional Standard - Aquaculture, Stabilizer

RO-ASRO, Stabilizer

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Stabilizer

Japanese Industrial Standards Committee (JISC), Stabilizer

轻工业部, Stabilizer

国家煤矿安全监察局, Stabilizer

  • MT/T 1195-2020 Calibration procedures for carbon and hydrogen analyzers in coal

Military Standard of the People's Republic of China-General Armament Department, Stabilizer

  • GJB/J 3354-1998 Calibration procedures for stray light coefficient measuring instrument
  • GJB 3354A-2019 Calibration procedures for stray light coefficient measuring instrument
  • GJB/J 3361-1998 Calibration procedures for white light transmittance measuring instrument
  • GJB/J 3361-1998(XG1-2015) White Light Transmittance Meter Calibration Regulations Modification Sheet 1-2015

Professional Standard - Building Materials, Stabilizer

  • JC/T 962-2005 Tester for determining expansion of Le Chatelier needles
  • JC/T 958-2005 Flow table for determine mortar fluidity
  • JC/T 727-2005 Apparatus for determining normal consistency and setting time of cement paste

Professional Standard - Textile, Stabilizer

Professional Standard - Grain, Stabilizer

工业和信息化部/国家能源局, Stabilizer

Professional Standard - Military and Civilian Products, Stabilizer

  • WJ 2298-1995 CS-244/344 Carbon and Sulfur Meter Verification Regulations
  • WJ 2539-1999 Verification Regulations for Temperature Measuring Diode Meter
  • WJ 2250-1994 Verification Regulations for Activated Carbon Specific Surface Area Meter
  • WJ 2293-1995 Verification rules for microscope temperature platform melting point tester
  • WJ 2276-1995 Verification rules for activated carbon and impregnated carbon particle size analyzer
  • WJ 2282-1995 Verification regulations for protective equipment ventilation resistance tester
  • WJ 2283-1995 Verification rules for activated carbon and impregnated carbon strength tester
  • WJ 2261-1994 Verification rules for thermal conductivity and infrared absorption nitrogen and oxygen detectors

Professional Standard - Medicine, Stabilizer

Professional Standard - Petroleum, Stabilizer

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Stabilizer

  • GB/T 32208-2015 Chemical oxygen demand meters
  • GB/T 26793-2011 Coulometry micro water teller
  • GB/T 6689-1986 Determination of colour difference of dyes(Instrumental method)
  • GB/T 15953-1995 Instruments for the measurement of aural acoustic impedance/admittance
  • GB/T 30733-2014 Determination of total carbon, hydrogen and nitrogen content in coal.Instrumental method
  • GB/T 31427-2015 Specification for determinator of coal ash fusibility
  • GB/T 6688-1986 Determination of relative strength of dyes(Instrumental method)
  • GB/T 29249-2012 Electronic weighing moisture analyzer of oven drying
  • GB/T 27506-2011 Mechanical weighing moisture analyzer of oven drying
  • GB/T 1538-1979 Determination of paper board folding strength(Shawbel's)
  • GB/T 6688-2008 Dyestuffs.Determination of relative strength and color difference.Instrumental method
  • GB/T 9338-2008 Fluorescent whitening agents.Determination of relative whiteness.Instrumental measurement
  • GB/T 29405-2012 Inspection of grain and oils.Determination of fat acidity of cereal and cereal products.Instrumental analysis method

CZ-CSN, Stabilizer

Professional Standard - Construction Industry, Stabilizer

Professional Standard - Chemical Industry, Stabilizer

  • HG/T 3238-1987 Technical specifications of flash point tester
  • HG/T 4178-2011 Intelligent double cup flash point tester
  • HG/T 2114-1991 Technical conditions for low flash point tester
  • HG/T 2439-2011 Technical specifications for drop ball rebound tester
  • HG/T 2439-1993 Technical conditions of falling ball rebound tester
  • HG/T 2064-1991 Technical conditions of filling volume measuring instrument
  • HG/T 3138-1998 JX type technical conditions of the sieve remains tester mensural instrument
  • HG/T 2152-2011 Technical specifications for DBP absorption number of carbon black absorptometers
  • HG/T 2152-1991 Carbon black DBP absorption value tester technical conditions
  • HG/T 2756-1996 Determination of Gel Time of Phenolic Resin at a Given Temperature Using an Automatic Measuring Apparatus

Professional Standard - Railway, Stabilizer

  • TB/T 3129-2006 Measurement machines for wheel-weight of railway vehicles

Korean Agency for Technology and Standards (KATS), Stabilizer

  • KS I 2218-2009 Detector tube type gas measuring instruments
  • KS B 0501-2001 Instruments for the measurement of surfaceroughness by the stylus method-Profile method
  • KS M 7096-2018 Paper — Determination of stiffness by Clark stiffness tester
  • KS B 0506-1975 Instruments for the Measurement of Surface Roughness by the Interferometric Method
  • KS M ISO 18898:2010 Rubber-Calibration and verification of hardness testers
  • KS R 3033-1984 Simplified carbonmonoxide testers for automobiles
  • KS I ISO 22719:2009 Water quality-Determination of total alkalinity in sea water using high precision potentiometric titration
  • KS R 1051-2013 Testing methods for simplified carbonmonoxide testers for automobiles
  • KS R 1051-2006(2011) Testing methods for simplified carbonmonoxide testers for automobiles
  • KS R 1051-1986 Testing methods for simplified carbonmonoxide testers for automobiles
  • KS B ISO 8655-2:2017 Piston-operated volumetric apparatus－Part 2：Piston pipettes
  • KS L ISO 8301-2006(2021) Thermal insulation－Determination of steady-state thermal resistance and related properties－Heat flow meter apparatus

National Metrological Technical Specifications of the People's Republic of China, Stabilizer

Professional Standard - Electron, Stabilizer

Professional Standard - Ocean, Stabilizer

国家铁路局, Stabilizer

国家能源局, Stabilizer

  • SY/T 5382-2009 Drilling fluid solid phase content measuring instrument
  • NB/T 10368-2019 Mining drilling trajectory measuring instrument while drilling
  • SY/T 5378-2009 Technical specifications of drilling fluid sand content measuring instrument
  • SY/T 6677-2022 Calibration method of drilling fluid solid phase content measuring instrument

Professional Standard - Coal, Stabilizer

  • MT/T 708-1997 Technical condition of the instrument for determing the susceptibility of coal
  • MT/T 940-2005 General specifications of the instrument for determination of fluorine and chlorine in coal
  • MT/T 941-2005 General specifications for the determinator of fusibility of ash
  • MT/T 948-2005 General specifications of determinater of the abrasion index of coal
  • MT/T 226-2005 General specifications for determinator of caking index
  • MT/T 230-2005 General specifications of Hardgrove grindability machine
  • MT/T 228-2005 General specification for carbon and hydrogen analyzer-Gravimetric method
  • MT/T 937-2005 General specifications for determinator of plastometric indices of bituminous coal
  • MT/T 939-2005 General specification for carbon and hydrogen analyzer-coulometric and gravimetric method
  • MT/T 642-1996 Specifications for Comprehensive Parameter Tester for Pipeline Gas Drainage
  • MT 563-1996 General technical specifications for portable gas measuring instruments used in coal mines

Taiwan Provincial Standard of the People's Republic of China, Stabilizer

  • CNS 10794-1984 Instruments for the Measurement of Surface Roughness by the Stylus Method

Professional Standard - Nuclear Industry, Stabilizer

  • EJ/T 904-1994 Single Photon Bone Mineral Densitometer
  • EJ/T 298-1987 Technical requirements for probes of human thyroid iodine uptake rate measuring instrument

KR-KS, Stabilizer

煤炭工业部, Stabilizer

  • MT 228-1990 Technical conditions of carbon and hydrogen analyzer in coal
  • MT 226-1990 Technical conditions of bituminous coal adhesion index measuring instrument
  • MT 227-1990 Technical conditions of high-temperature combustion measuring instrument for total sulfur in coal
  • MT 229-1990 Technical conditions of bituminous coal crucible expansion number measuring instrument
  • MT 230-1990 Technical conditions of Hastelloy grindability index tester for coal

RU-GOST R, Stabilizer

  • GOST 8.518-1984 State system for ensuring the uniformity of measurements. Ferritometers for austenite steel. Methods of verification
  • GOST 25935-1983 Dosimetric instruments. Methods of measuring main parameters
  • GOST 23288-1978 Direction finders. Terms and definitions
  • GOST 33906-2016 Aviation turbine fuels. Determination of lubricity by the ball-on-cylinder lubricity evaluator (BOCLE)
  • GOST R 51415-1999 Wheat flour. Physical characteristics of doughs. Determination of rheological properties using a alveograph
  • GOST R 54284-2010 Crude oil. Determination of water by coulometric Karl Fischer titation
  • GOST R ISO 5764-2011 Milk. Determination of freezing point. Thermistor cryoscope method (reference method)

Professional Standard - Water Conservancy, Stabilizer

  • SL 124-2014 Calibration methods for testing instrument of hydration heat of cement
  • SL 113-2014 Code for calibration of photoelectric fall cone liquid limit and plastic limit device
  • SL 123-1995 Method for calibration of cement mortar flow tester
  • SL 132-1995 Method for calibration of vapor-pressure type air entrainment meter
  • SL 113-1995 Calibration method of photoelectric liquid-plastic limit tester
  • SL 136-1995 Test method for adiabatic temperature rise tester
  • SL 144.2-2008 Calibration method of multi-parameter water quality sonde
  • SL 136-2017 Calibration method of concrete thermal parameter tester
  • SL 135-1995 Test method for dynamic elastic concrete modulus tester
  • SL 135-2017 Calibration method of concrete dynamic elastic modulus tester

Professional Standard - Non-ferrous Metal, Stabilizer

  • YS/T 964-2014 Determinator for the reactivity to air of carbon block used in the production of aluminium
  • YS/T 963-2014 Determinator for electrical resistivity of granules of calcined coke
  • YS/T 965-2014 Determinator for the reactivity to carbon dioxide of prebaked anodes used in the production of aluminium

Professional Standard - Commodity Inspection, Stabilizer

National Electrical Manufacturers Association（NEMA), Stabilizer

British Standards Institution (BSI), Stabilizer

  • BS ISO 18898:2012 Rubber. Calibration and verification of hardness testers
  • BS ISO 18898:2016 Rubber. Calibration and verification of hardness testers
  • BS EN ISO 179-2:1999 Plastics - Determination of Charpy impact properties - Instrumented impact test
  • BS EN ISO 179-2:1999+A1:2012 Plastics. Determination of Charpy impact properties. Instrumented impact test
  • BS ISO 29541:2010 Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen content. Instrumental method
  • BS EN ISO 179-2:2020 Plastics. Determination of Charpy impact properties - Instrumented impact test
  • BS EN 13860-1:2003 Non destructive testing - Eddy current examination - Equipment characteristics and verification - Instrument characteristics and verification

API - American Petroleum Institute, Stabilizer

  • API 4121-1971 IMPROVED INSTRUMENTATION FOR DETERMINATION OF EXHAUST GAS OXYGENATE CONTENT

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Stabilizer

American National Standards Institute （ANSI), Stabilizer

Hunan Provincial Standard of the People's Republic of China, Stabilizer

International Organization for Standardization (ISO), Stabilizer

  • ISO 18898:2016 Rubber - Calibration and verification of hardness testers
  • ISO 18898:2012 Rubber - Calibration and verification of hardness testers
  • ISO 22719:2008 Water quality - Determination of total alkalinity in sea water using high precision potentiometric titration
  • ISO 29541:2010 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen content - Instrumental method
  • ISO/TS 12902:2001 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods

水利部, Stabilizer

  • SL/T 124-2014 Calibration method of cement hydration heat meter
  • SL/T 113-2014 Calibration method of photoelectric liquid plastic limit measuring instrument
  • SL 123-2012 Calibration method of cement mortar fluidity tester
  • SL/T 136-2017 Calibration method of concrete thermal parameter measuring instrument
  • SL/T 135-2017 Calibration method of concrete dynamic elastic modulus measuring instrument

中国轻工总会, Stabilizer

  • ZBW 0017-1989 Yarn diameter measurement method CCD measuring instrument method

Heilongjiang Provincial Standard of the People's Republic of China, Stabilizer

Society of Automotive Engineers (SAE), Stabilizer

American Society of Mechanical Engineers (ASME), Stabilizer

国家市场监督管理总局、中国国家标准化管理委员会, Stabilizer

  • GB/T 37769-2019 Guide for performance acceptance of determinator of coal ash fusibility

SAE - SAE International, Stabilizer

Standard Association of Australia （SAA）, Stabilizer

  • AS 2162.2:1998 Verification and use of volumetric apparatus - Guide to the use of piston-operated volumetric apparatus (POVA)

Professional Standard - Environmental Protection, Stabilizer

  • HJ/T 46-1999 Technical conditions of detector of sulphur dioxide concentration for constant potential electrolysis method
  • HJ 925-2017 Technical requirements and testing methods of portable dissolved oxygen meter
  • HJ 924-2017 Technical requirements and detection methods of COD photometric rapid detector

American Society for Testing and Materials (ASTM), Stabilizer

  • ASTM E3040-18 Standard Practice for Evaluation of Instrumental Color Difference with a Gray Scale
  • ASTM E3040-22 Standard Practice for Evaluation of Instrumental Color Difference with a Gray Scale
  • ASTM E3040-16 Standard Practice for Evaluation of Instrumental Color Difference with a Gray Scale
  • ASTM E1269-05 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
  • ASTM E126-92(1998) Standard Test Method for Inspection and Verification of Hydrometers
  • ASTM E1269-01 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
  • ASTM E1269-99 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
  • ASTM E1269-04 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
  • ASTM E2214-02 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
  • ASTM E2214-08e1 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
  • ASTM E2214-12e1 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
  • ASTM E2214-12 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
  • ASTM E1154-89(1997) Standard Specification for Piston or Plunger Operated Volumetric Apparatus
  • ASTM D4541-09e1 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

U.S. Military Regulations and Norms, Stabilizer

Association Francaise de Normalisation, Stabilizer

European Committee for Standardization (CEN), Stabilizer

  • EN 13205:2001 Workplace Atmospheres - Assessment of Performance of Instruments for Measurement of Airborne Particle Concentrations
  • EN ISO 5764:2009 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method)
  • EN 15104:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods

IN-BIS, Stabilizer

ZA-SANS, Stabilizer

  • SANS 5764:2005 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method)

PT-IPQ, Stabilizer

United States Navy, Stabilizer

Henan Provincial Standard of the People's Republic of China, Stabilizer

  • DB41/T 1029-2015 General technical specifications for portable rapid soil nutrient analyzer

国家烟草专卖局, Stabilizer

  • YC/T 567-2018 General technical specifications for cut tobacco/expanded cut stem filling value tester

CEN - European Committee for Standardization, Stabilizer

  • PD CEN/TS 15104:2005 Solid biofuels - Determination of total content of carbon@ hydrogen and nitrogen - Instrumental methods

  Automatic azotometer, Fast azotometer, Azotometer, many gauges, Stabilizer, Azotometer, Fast azotometer, Potentiometer, Potentiometer, Soil azotometer, Azotometer 1, Yipin Nitrogen Analyzer, Determination instrument, Oxygen meter, Hydrogen meter, Azotometer Azotometer, Statutory instrument, Timer, Fluorometer, Loading instrument.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved