ZH
RU
ES

Rapid Method for Determination of Thermal Diffusivity

Rapid Method for Determination of Thermal Diffusivity, Total:289 items.

In the international standard classification, Rapid Method for Determination of Thermal Diffusivity involves: Powder metallurgy, Testing of metals, Cellular materials, Packaging materials and accessories, Thermodynamics and temperature measurements, Plastics, Ceramics, Inorganic chemicals, Construction materials, Metrology and measurement in general, Mechanical testing, Pipeline components and pipelines, Power stations in general, Rubber, Products of the chemical industry, Products of the textile industry, Test conditions and procedures in general, Surface treatment and coating, Pulps, Paper and board, Raw materials for rubber and plastics, Paint ingredients, Radiation measurements, Nuclear energy engineering, Farming and forestry, Edible oils and fats. Oilseeds, Fertilizers, Domestic, commercial and industrial heating appliances, Cereals, pulses and derived products, Semiconducting materials, Insulating materials, TESTING, Analytical chemistry, Protection of and in buildings, Soil quality. Pedology, General methods of tests and analysis for food products, Rubber and plastics products, Lubricants, industrial oils and related products, Paints and varnishes, Protection against fire.

IN-BIS, Rapid Method for Determination of Thermal Diffusivity

IS 10698-1983

Association Francaise de Normalisation, Rapid Method for Determination of Thermal Diffusivity

NF ISO 21901:2021 Isolation thermique - Méthode d'essai pour la diffusivité thermique - Méthode de chauffage périodique.
NF EN ISO 16536:2019 Produits isolants thermiques destinés aux applications du bâtiment - Détermination de l'absorption d'eau à long terme par diffusion
NF T51-227-4:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4 : laser flash method.
NF EN ISO 22007-2:2022 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 2 : Méthode de la source plane transitoire (disque chaud)
NF EN ISO 22007-3:2012 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 3 : méthode par analyse de l'oscillation de la température
NF T51-227-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1 : general principles.
NF T51-227-2:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2 : transient plane heat source (hot disk) method.
NF T51-227-2*NF EN ISO 22007-2:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2 : transient plane heat source (hot disc) method
NF T51-227-1*NF EN ISO 22007-1:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1 : general principles
NF P75-217*NF EN ISO 16536:2019 Thermal insulating products for building applications - Determination of long-term water absorption by diffusion
NF T51-227-3*NF EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3 : temperature wave analysis method
NF T51-227-6*NF EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6 :comparative method for low thermal conductivities using a temperature-modulation technique
NF EN ISO 22007-6:2015 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 6 : méthode comparative pour faibles conductivités thermiques utilisant une technique de modulation de la température
NF P75-217:2013 Thermal insulating products for building applications - Determination of long term water absorption by diffusion
NF EN ISO 19629:2022 Céramiques techniques - Propriétés thermophysiques des composites céramiques - Détermination de la diffusivité thermique unidimensionnelle par la méthode flash
NF T54-908*NF EN ISO 13478:2007 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST).
NF B41-214*NF EN 821-2:1997 Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties. Part 2 : determination of thermal diffusivity by the laser flash (or heat pulse) method.
NF EN 821-2:1997 Céramiques techniques avancées - Céramiques monolithiques - Propriétés thermo-physiques. Partie 2 : détermination de la diffusivité thermique par la méthode Flash laser (ou impulsion de chaleur).
NF EN ISO 22007-4:2017 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 4 : méthode flash laser
NF EN ISO 13478:2007 Tubes en matières thermoplastiques pour le transport des fluides - Détermination de la résistance à la propagation rapide de la fissure (RCP) - Essai grandeur nature (FST)
NF T45-138-1:1993 RUBBER COMPOUNDING INGREDIENTS. CARBON BLACK. DETERMINATION OF LIGHT TRANSMITTANCE OF TOLUENCE EXTRACT. PART 1 : RAPID METHOD.
NF T54-908:1997 Thermoplastics pipes for the conveyance of fluids. Determination of resistance to rapid crack propagation (RCP). Full-scale test (FST).
NF B43-404*NF EN ISO 19629:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of unidimensional thermal diffusivity by flash method
NF EN ISO 13477:2008 Tubes en matières thermoplastiques pour le transport des fluides - Détermination de la résistance à la propagation rapide de la fissure (RCP) - Essai à petite échelle à état constant (essai S4)
NF T54-907*NF EN ISO 13477:2008 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test)
NF T51-038-1*NF EN ISO 1133-1:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1 : standard method.
NF EN 3873:2012 Série aérospatiale - Méthodes d'essais applicables aux matériaux métalliques - Détermination de la vitesse de propagation de fissure en fatigue à l'aide d'éprouvettes avec fissure en coin

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Rapid Method for Determination of Thermal Diffusivity

GB/T 11108-2017 Test method for thermal diffusivity of hardmetal
GB/T 35807-2018 Rubber, vulcanized—Determination of thermal diffusivity—Flash method
GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Rapid Method for Determination of Thermal Diffusivity

GB/T 11108-1989 Test method for thermal diffusivity of hardmetal (carbide)
GB/T 31229-2014 Test method for volatility rate by thermogravimetry
GB/T 3780.15-1997 Carbon black for use in the rubber industry--Determination of light transmittance of toluene extract--Rapid method
GB/T 2396-2013 Disperse dyes.Determination of degree of fixation.Thermosol dyeing process
GB/T 15690-2008 Oilseeds.Determination of oil content.Method using continuous-wave low-resolution nuclear magnetic resonance spectrometry (Rapid method)
GB/T 42919.4-2023 Determination of thermal conductivity and thermal diffusivity of plastics - Part 4: Laser flash method
GB/T 42919.3-2023 Determination of thermal conductivity and thermal diffusivity of plastics - Part 3: Temperature wave analysis
GB/T 42903-2023 Determination method for creep crack and creep-fatigue crack growth rate of metallic materials
GB/T 19280-2003 Thermoplastics pipes for the conveyance of fluids--Determination of resistance to rapid crack propagation (RCP)--Small-scale steady-state test(S4 test)
GB/T 38473-2020 Textiles－Determination of drying rate in dynamic state (sweating guarded-hotplate test)
GB/T 42919.6-2023 Determination of thermal conductivity and thermal diffusivity of plastics - Part 6: Comparative method based on temperature modulation technique

Korean Agency for Technology and Standards (KATS), Rapid Method for Determination of Thermal Diffusivity

KS M ISO 20393-2012(2022) Thermal-insulating materials－Determination of long-term water absorption by diffusion
KS M ISO 20393-2012(2017) Thermal-insulating materials－Determination of long-term water absorption by diffusion
KS M ISO 20393:2012 Thermal-insulating materials－Determination of long-term water absorption by diffusion
KS L 1604-2017 Fine ceramics－Determination of thermal diffusivity, specific heat capacity,and thermal conductivity of monolithic ceramics by laser flash method
KS L 1604-2017(2022) Fine ceramics－Determination of thermal diffusivity, specific heat capacity,and thermal conductivity of monolithic ceramics by laser flash method
KS I 3223-2007 Testing methods for oxygen transfer rate of air diffuser
KS K 0712-2011 Test method for thermal fixation properties of disperse dyes
KS M ISO 13478:2003 Thermoplastics pipes for the conveyance of fluids-Determination ofresistance to rapid crack propagation(RCP)-Full-scale test(FST)
KS M ISO 13478:2013 Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Full-scale test (FST)
KS B ISO 3149:2005 Radiators, convectors and similar appliances-Determination of thermal output-Test method using liquid-cooled closed booth
KS M ISO 3858-1:2009 Carbon black for use in the rubber industry-Determination of light transmittance of toluene extract-Part 1:Rapid method
KS M ISO 3858-1-2002(2007) Carbon black for use in the rubber industry－Determination of light transmittance of toluene extract－Part 1：Rapid method
KS M ISO 1133-1-2012(2017) Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics－Part 1：Standard method

British Standards Institution (BSI), Rapid Method for Determination of Thermal Diffusivity

20/30381891 DC BS ISO 21901. Thermal insulation. Test method for thermal diffusivity. Periodic heat method
BS EN ISO 22007-4:2017 Tracked Changes. Plastics. Determination of thermal conductivity and thermal diffusivity. Laser flash method
BS EN ISO 22007-2:2022 Plastics. Determination of thermal conductivity and thermal diffusivity - Transient plane heat source (hot disc) method
BS ISO 22007-7:2023 Plastics. Determination of thermal conductivity and thermal diffusivity - Transient measurement of thermal effusivity using a plane heat source
BS EN ISO 22007-1:2017 Tracked Changes. Plastics. Determination of thermal conductivity and thermal diffusivity. General principles
BS ISO 22007-6:2014 Plastics. Determination of thermal conductivity and thermal diffusivity. Comparative method for low thermal conductivities using a temperature-modulation technique
BS EN ISO 22007-6:2015 Plastics. Determination of thermal conductivity and thermal diffusivity. Comparative method for low thermal conductivities using a temperature-modulation technique
23/30466777 DC BS EN ISO 22007-4. Plastics. Determination of thermal conductivity and thermal diffusivity - Part 4. Laser flash method
21/30427387 DC BS EN ISO 22007-2. Plastics. Determination of thermal conductivity and thermal diffusivity. Part 2. Transient plane heat source (hot disc) method
BS EN ISO 16536:2019 Thermal insulating products for building applications. Determination of long-term water absorption by diffusion
23/30465226 DC BS EN ISO 22007-1. Plastics. Determination of thermal conductivity and thermal diffusivity - Part 1. General principles
BS EN 821-2:1997 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Determination of thermal diffusivity by the laser flash (or heat pulse) method
PD CEN ISO/TR 22007-5:2014 Plastics. Determination of thermal conductivity and thermal diffusivity. Results of interlaboratory testing of poly(methyl methacrylate) samples
BS ISO 13826:2013 Metallic and other inorganic coatings. Determination of thermal diffusivity of thermally sprayed ceramic coatings by laser flash method
DD CEN/TS 15866:2009 Advanced technical ceramics. Ceramic composites. Determination of the thermal diffusivity of ceramic fibres
22/30427246 DC BS ISO 22007-7. Plastics. Determination of thermal conductivity and thermal diffusivity. Part 7. Measurement of thermal effusivity using a regularly-shaped transient plane source probe
BS ISO 18755:2022 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of thermal diffusivity of monolithic ceramics by flash method
DD ENV 1159-2-1994 Advanced technical ceramics. Ceramic composites. Thermophysical properties. Determination of thermal diffusivity
BS PD CEN ISO/TR 22007-5:2014 Plastics. Determination of thermal conductivity and thermal diffusivity. Results of interlaboratory testing of poly(methyl methacrylate) samples
BS EN ISO 22007-2:2015 Plastics. Determination of thermal conductivity and thermal diffusivity. Transient plane heat source (hot disc) method
BS EN ISO 13478:2008 Thermoplastics pipes for the conveyance of fluids. Determination of resistance to rapid crack propagation (RCP). Full-scale test (FST)
BS EN ISO 13478:2007 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST)
21/30424847 DC BS ISO 18755. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of thermal diffusivity of monolithic ceramics by flash method
BS EN ISO 5511:1997 Oilseeds - Determination of oil content - Method using continuous-wave low-resolution nuclear magnetic resonance spectrometry (Rapid method)
BS ISO 19629:2018 Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of unidimensional thermal diffusivity by flash method
BS EN ISO 19629:2022 Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of unidimensional thermal diffusivity by flash method
BS EN ISO 13477:2008 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test)
BS EN ISO 6179:2010 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique)
BS EN ISO 1133-1:2022 Tracked Changes. Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Standard method
BS EN ISO 23811:2009 Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the nonvolatile matter content and the density of the coating material, and calculation of the theoretical spreading rate (ISO 23811:2009)

CZ-CSN, Rapid Method for Determination of Thermal Diffusivity

CSN 77 0332-1980 Testing of sheet materials. Determination of water-vapour transmission rate - dish method

American Society for Testing and Materials (ASTM), Rapid Method for Determination of Thermal Diffusivity

ASTM E1461-13(2022) Standard Test Method for Thermal Diffusivity by the Flash Method
ASTM E1461-07 Standard Test Method for Thermal Diffusivity by the Flash Method
ASTM E2585-09(2022) Standard Practice for Thermal Diffusivity by the Flash Method
ASTM E1461-11 Standard Test Method for Thermal Diffusivity by the Flash Method
ASTM E1461-13 Standard Test Method for Thermal Diffusivity by the Flash Method
ASTM E2585-09 Standard Practice for Thermal Diffusivity by the Flash Method
ASTM E2585-09(2015) Standard Practice for Thermal Diffusivity by the Flash Method
ASTM E1952-23 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM C714-23 Standard Guide for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
ASTM C714-05(2015) Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
ASTM E1952-11 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1952-01 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1952-06 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1952-98 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM D7896-19 Standard Test Method for Thermal Conductivity, Thermal Diffusivity, and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
ASTM D4612-16 Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil
ASTM D7896-14 Standard Test Method for Thermal Conductivity, Thermal Diffusivity and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
ASTM E1952-17 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E526-97 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium
ASTM E526-97(2002) Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium
ASTM E526-22 Standard Test Method for Measuring Fast-Neutron Reaction Rates By Radioactivation of Titanium
ASTM C714-85(2000) Standard Test Method for Thermal Diffusivity of Carbon and Graphite by a Thermal Pulse Method
ASTM C714-17 Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
ASTM C714-05 Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
ASTM C714-05e1 Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
ASTM C714-05(2010) Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
ASTM E262-17 Standard Test Method for Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by Radioactivation Techniques
ASTM E1297-18 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium
ASTM E1297-08 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium
ASTM F1589-95(2001) Standard Test Method for Determination of the Critical Pressure for Rapid Crack Propagation in Plastic Pipe (Withdrawn 2003)
ASTM D3850-94(2000) Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM D3850-94(2006) Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM D3850-12 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM E264-02 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel
ASTM E1297-02 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium
ASTM E2008-99 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM D7708-11 Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks
ASTM E2008-04 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E2008-06 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM D6811-02 Standard Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HiReTS Method)^{1, 2}
ASTM D6811-02(2007) Standard Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HiReTS Method)
ASTM D6811-02(2007)e1 Standard Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HiReTS Method)

GOSTR, Rapid Method for Determination of Thermal Diffusivity

GOST R 57943-2017 Plastics. Determination of thermal conductivity and thermal diffusivity. Part 4. Laser flash method
GOST R 57830-2017 Composites. Determination of thermal conductivity and thermal diffusivity by modulated temperature differential scanning calorimetry

International Organization for Standardization (ISO), Rapid Method for Determination of Thermal Diffusivity

ISO 22007-4:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method
ISO 22007-4:2008 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method
ISO 22007-2:2022 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
ISO 22007-2:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method
ISO 22007-2:2008 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
ISO 20393:2007 Thermal-insulating materials - Determination of long-term water absorption by diffusion
ISO 22007-3:2008 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 3: Temperature wave analysis method
ISO 22007-1:2009 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
ISO 22007-1:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
ISO 22007-6:2014 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
ISO 22007-7:2023 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 7: Transient measurement of thermal effusivity using a plane heat source
ISO 16536:2019 Thermal insulating products for building applications — Determination of long-term water absorption by diffusion
ISO 13826:2013 Metallic and other inorganic coatings - Determination of thermal diffusivity of thermally sprayed ceramic coatings by laser flash method
ISO 5511:1992 Oilseeds; determination of oil content; method using continuous-wave low-resolution nuclear magnetic resonance spectrometry (rapid method)
ISO/DIS 22007-4:2023 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Light flash method
ISO 18755:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of thermal diffusivity of monolithic ceramics by flash method
ISO 13478:2007 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST)
ISO/TR 22007-5:2011 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples
ISO 3858-1:1983 Rubber compounding ingredients — Carbon black — Determination of light transmittance of toluene extract — Part 1: Rapid method
ISO 3858-1:1990 Carbon black for use in the rubber industry; determination of light transmittance of toluene extract; part 1: rapid method
ISO 19629:2018 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of unidimensional thermal diffusivity by flash method
ISO 12572:2016 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method
ISO 13477:2008 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test)
ISO 9932:1990 Paper and board; determination of water vapour transmission rate of sheet materials; dynamic sweep and static gas methods
ISO 9932:2021 Paper and board - Determination of water vapour transmission rate of sheet materials - Dynamic sweep and static gas methods
ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 18755:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thermal diffusivity of monolithic ceramics by laser flash method

ES-UNE, Rapid Method for Determination of Thermal Diffusivity

UNE-EN ISO 22007-2:2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2022)
UNE-EN ISO 22007-1:2018 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2017)
UNE-EN ISO 16536:2020 Thermal insulating products for building applications - Determination of long-term water absorption by diffusion (ISO 16536:2019)
UNE-EN 821-2:1997 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method
UNE-EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014)
UNE-EN ISO 1133-1:2023 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)

Japanese Industrial Standards Committee (JISC), Rapid Method for Determination of Thermal Diffusivity

JIS R 1611:1997 Test methods of thermal diffusivity, specific heat capacity, and thermal conductivity for fine ceramics by laser flash method
JIS R 1611:2010 Measurement methods of thermal diffusivity, specific heat capacity, and thermal conductivity for fine ceramics by flash method
JIS R 1689:2011 Determination of thermal diffusivity of fine ceramic films by pulsed light heating thermoreflectance method
JIS R 1689:2018 Determination of thermal diffusivity of fine ceramic films by pulsed light heating thermoreflectance method
JIS R 1650-3:2002 Method for measurement of fine ceramics thermoelectric materials Part 3: Thermal diffusivity, specific heat capacity, and thermal conductivity
JIS R 1667:2005 Determination of thermal diffusivity of continuous fiber-reinforced ceramic matrix composites by the laser flash method
JIS A 1805:2001 Methods of test for production control of concrete -- Method of rapid test for compressive strength of concrete by warm water curing
JIS K 7210-1:2014 Plastics.Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics.Part 1: Standard method

German Institute for Standardization, Rapid Method for Determination of Thermal Diffusivity

DIN EN ISO 22007-4:2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Light flash method (ISO/DIS 22007-4:2023); German and English version prEN ISO 22007-4:2023
DIN EN ISO 22007-4:2023-03 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Light flash method (ISO/DIS 22007-4:2023); German and English version prEN ISO 22007-4:2023 / Note: Date of issue 2023-02-03*Intended as replacement for DIN EN ISO 22007...
DIN EN ISO 22007-1:2018-03 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2017); German version EN ISO 22007-1:2017
DIN EN ISO 22007-4:2017-11 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017); German version EN ISO 22007-4:2017
DIN EN ISO 22007-2:2022-09 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2022); German version EN ISO 22007-2:2022
DIN EN ISO 22007-3:2012-04 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008); German version EN ISO 22007-3:2012
DIN EN ISO 16536:2019-11 Thermal insulating products for building applications - Determination of long-term water absorption by diffusion (ISO 16536:2019); German version EN ISO 16536:2019
DIN EN ISO 22007-1:2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO/DIS 22007-1:2023); German and English version prEN ISO 22007-1:2023
DIN EN ISO 22007-1:2023-04 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO/DIS 22007-1:2023); German and English version prEN ISO 22007-1:2023 / Note: Date of issue 2023-03-10*Intended as replacement for DIN EN ISO 22007...
DIN 51936:2008 Testing of carbonaceous materials - Determination of thermal diffusity at high temperatures by the laser pulse method - Solid materials
DIN 51936:2016 Testing of carbonaceous materials - Determination of thermal diffusity at high temperatures by the laser pulse method - Solid materials
DIN EN ISO 16536:2019 Thermal insulating products for building applications - Determination of long-term water absorption by diffusion (ISO 16536:2019)
DIN EN ISO 13478:2007 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:2007); English version of DIN EN ISO 13478:2007-11
DIN 51936:1994 Testing of carbon materials; determination of thermal diffusity at high temperatures by the laser pulse method; solid materials
DIN CEN/TS 15866:2009-07 Advanced technical ceramics - Ceramic composites - Determination of the thermal diffusivity of ceramic fibres; German version CEN/TS 15866:2009
DIN 51175:2000 Vitreous and porcelain enamels - Determination of thermomechanical properties by means of a rapid test method
DIN 51175:2014 Vitreous and porcelain enamels - Determination of thermomechanical properties by means of a rapid test method
DIN EN 821-2:1997-08 Advanced technical ceramics - Monolithic ceramics, thermo-physical properties - Part 2: Determination of thermal diffusity by the laser flash (or heat pulse) method; German version EN 821-2:1997
DIN EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008); German version EN ISO 22007-3:2012
DIN EN ISO 5511:1997 Oilseeds - Determination of oil content - Method using continuous-wave low-resolution nuclear magnetic resonance spectrometry (Rapid method) (ISO 5511:1992) (includes Amendment AC:1997); German version EN ISO 5511:1996 + AC:1997
DIN CEN ISO/TR 22007-5:2014-11*DIN SPEC 53367:2014-11 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011); German version CEN ISO/TR 22007-5:2014
DIN EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014); German version EN ISO 22007-6:2015
DIN EN 12088:2013 Thermal insulating products for building applications - Determination of long term water absorption by diffusion; German version EN 12088:2013
DIN EN ISO 13478:2007-11 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:2007); German version EN ISO 13478:2007
DIN EN ISO 18755:2023-08 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thermal diffusivity of monolithic ceramics by flash method (ISO 18755:2022); German and English version prEN ISO 18755:2023 / Note: Date of issue 2023-06-30
DIN EN ISO 13477:2008 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (ISO 13477:2008); German version EN ISO 13477:2008
DIN 51936:2016-08 Testing of carbonaceous materials - Determination of thermal diffusity at high temperatures by the laser pulse method - Solid materials
DIN EN ISO 13477:2008-06 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (ISO 13477:2008); German version EN ISO 13477:2008
DIN EN ISO 19629:2022-07 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of unidimensional thermal diffusivity by flash method (ISO 19629:2018); German version EN ISO 19629:2022
DIN EN ISO 22007-6:2015-05 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014); German version EN ISO 22007-6:2015
DIN EN ISO 1133-1:2022-10 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022); German version EN ISO 1133-1:2022
DIN EN ISO 22007-2:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2008); German version EN ISO 22007-2:2012
DIN EN ISO 22007-2:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2015); German version EN ISO 22007-2:2015

American National Standards Institute （ANSI), Rapid Method for Determination of Thermal Diffusivity

ISO/DIS 22007-1:2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
ANSI/ASTM F1589:1996 Test Method for Determination of the Critical Pressure for Rapid Crack Propagation in Plastic Pipe
ANSI/ASTM E1354:2013 Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ANSI/ASTM D3364:1999 Test Method for Flow Rates for Poly(Vinyl Chloride) and Rheologically Unstable Thermoplastics (08.03)

Danish Standards Foundation, Rapid Method for Determination of Thermal Diffusivity

DS/EN ISO 22007-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
DS/EN 12088:2013 Thermal insulating products for building applications - Determination of long term water absorption by diffusion
DS/EN 1159-2:2003 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 2: Determination of thermal diffusivity
DS/EN 821-2:1998 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method
DS/ISO 3148:1976 Radiators, convectors and similar appliances. Determination of thermal output. Test method using air-cooled closed booth
DS/ISO 3149:1976 Radiators, convectors and similar appliances. Determination of thermal output. Test method using liquid-cooled closed booth
DS/EN ISO 22007-4:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method
DS/EN ISO 5511/AC:1997 Oilseeds - Determination of oil content - Method using continuous-wave low-resolution nuclear magnetic resonance spectrometry (Rapid method)
DS/EN ISO 5511:1997 Oilseeds - Determination of oil content - Method using continuous-wave low-resolution nuclear magnetic resonance spectrometry (Rapid method)
DS/EN ISO 22007-2:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method
DS/EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method
DS/EN ISO 13478:2007 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST)
DS/EN ISO 13477:2008 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test)

Lithuanian Standards Office , Rapid Method for Determination of Thermal Diffusivity

LST EN 12088-2000 Thermal insulating products for building applications - Determination of long term water absorption by diffusion
LST EN ISO 22007-4:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2008)
LST EN ISO 22007-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2009)
LST EN 1159-2-2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 2: Determination of thermal diffusivity
LST EN 821-2-2002 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method
LST EN ISO 22007-2:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2008)
LST EN ISO 13478:2007 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:2007)
LST EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008)
LST EN ISO 13477:2008 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (ISO 13477:2008)
LST EN ISO 5511+AC:2000 Oilseeds - Determination of oil content - Method using continuous-wave low-resolution nuclear magnetic resonance spectrometry (Rapid method) (ISO 5511:1992)

European Committee for Standardization (CEN), Rapid Method for Determination of Thermal Diffusivity

EN 12088:2013 Thermal insulating products for building applications - Determination of long term water absorption by diffusion
EN 12088:1997 Thermal Insulating Products for Building Applications - Determination of Long Term Water Absorption by Diffusion
prEN ISO 22007-1 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO/DIS 22007‑1:2023)
EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
EN ISO 16536:2019 Thermal insulating products for building applications - Determination of long-term water absorption by diffusion (ISO 16536:2019)
CEN/TS 15866:2009 Advanced technical ceramics - Ceramic composites - Determination of the thermal diffusivity of ceramic fibres
prEN 821-2-1992 Advanced technical ceramics; thermo-physical properties of monolithic ceramics; part 2: determination of thermal diffusivity by the laser flash (or heat pulse) method
EN ISO 13478:1997 Thermoplastics Pipes for the Conveyance of Fluids - Determination of Resistance to Rapid Crack Propagation (RCP) - Full-Scale Test (FST) ISO 13478: 1977
EN ISO 13478:2007 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:2007)
EN ISO 22007-4:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method
EN ISO 22007-4:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2008)
EN ISO 5511:1996 Oilseeds - Determination of Oil Content - Method Using Continous-Wave Low-Resolution Nuclear Magnetic Resonance Spectrometry (Rapid Method)
EN ISO 22007-2:2022 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2022)
EN ISO 22007-2:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method
EN ISO 19629:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of unidimensional thermal diffusivity by flash method (ISO 19629:2018)
EN ISO 22007-2:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2015)
prEN ISO 22007-4 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Light flash method (ISO/DIS 22007-4:2023)
EN ISO 13477:2008 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (ISO 13477:2008)
prEN ISO 22007-2:2021 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO/DIS 22007-2:2021)
EN ISO 1133-1:2022 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)
EN ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)

AENOR, Rapid Method for Determination of Thermal Diffusivity

UNE-EN 12088:2013 Thermal insulating products for building applications - Determination of long term water absorption by diffusion
UNE-EN ISO 22007-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2009)
UNE-EN ISO 22007-4:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017)
UNE-EN ISO 13478:2008 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:2007)
UNE-EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008)
UNE-EN ISO 13477:2008 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (ISO 13477:2008)

Professional Standard - Aerospace, Rapid Method for Determination of Thermal Diffusivity

QJ 1868-1990 Material thermal diffusivity test method Laser pulse method (300~1800K)

PT-IPQ, Rapid Method for Determination of Thermal Diffusivity

NP 1802-1985

Sichuan Provincial Standard of the People's Republic of China, Rapid Method for Determination of Thermal Diffusivity

DB51/T 2434-2017 Transient Measurement of Material Thermal Conductivity and Thermal Diffusivity—Pulse Method

US-FCR, Rapid Method for Determination of Thermal Diffusivity

FCR COE CRD-C 36-73-1973 HANDBOOK FOR CONCRETE AND CEMENT METHOD OF TEST FOR THERMAL DIFFUSIVITY OF CONCRETE

Guangdong Provincial Standard of the People's Republic of China, Rapid Method for Determination of Thermal Diffusivity

DB44/T 1373-2014 Rapid Determination of Reaction Rate of Limestone Powder in Wet Flue Gas Desulfurization

Anhui Provincial Standard of the People's Republic of China, Rapid Method for Determination of Thermal Diffusivity

DB34/T 4147-2022 Rapid Determination Method of Organic Heat Transfer Kinematic Viscosity (Broken Tube Method)

Taiwan Provincial Standard of the People's Republic of China, Rapid Method for Determination of Thermal Diffusivity

CNS 12885-2005 Pulp, paper and paperboard - Measurement of diffuse blue reflectance factor (ISO brightness)

Jiangsu Provincial Standard of the People's Republic of China, Rapid Method for Determination of Thermal Diffusivity

DB32/T 4026-2021 Laser flash method for measuring thermal diffusivity of graphene materials
DB32/T 3596-2019 Determination of thermal diffusivity and thermal conductivity of graphene materials by flash method

未注明发布机构, Rapid Method for Determination of Thermal Diffusivity

BS EN 821-2:1997(2000) Advanced technical ceramics — Monolithic ceramics — Thermo - physical properties — Part 2 : Determination of thermal diffusivity by the laser flash (or heat pulse) method
BS EN ISO 5511:1997(2000) Oilseeds — Determination ofoil content — Method using continuous - wave low - resolution nuclear magnetic resonance spectrometry (Rapid method)
BS EN ISO 13477:2008(2012) Thermoplastics pipes for the conveyance of fluids — Determination ofresistance to rapid crack propagation (RCP) — Small - scale steady - state test (S4 test)

AT-ON, Rapid Method for Determination of Thermal Diffusivity

ONORM ENV 1159-2-1993 Advanced technical ceramics - Ceramic composites -Thermophysical properties - Part 2: Determination of thermal diffusivity
OENORM EN ISO 22007-2:2021 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO/DIS 22007-2:2021)

CEN - European Committee for Standardization, Rapid Method for Determination of Thermal Diffusivity

CEN ISO/TR 22007-5:2014 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples

Group Standards of the People's Republic of China, Rapid Method for Determination of Thermal Diffusivity

T/SDAQI 062-2021 Rapid qualitative determination of Bacillus subtilis in fertilizers—Loop-mediated isothermal amplification
T/KJFX 002-2017 Rapid Determination of Cadmium in Rice and Its Products by Energy Dispersive X-ray Fluorescence Spectrometry
T/CAIA SH015-2021 Soil—Determination of Cadmium —Solid Sampling Electrothermal Vaporization Atomic Absorption Spectrometry
T/CAIA SH014-2021 Rapid Determination of Cadmium in Grain Direct Solid Sampling Electrothermal Vaporization Atomic Absorption Spectrometry

海关总署, Rapid Method for Determination of Thermal Diffusivity

SN/T 5240-2020 Cone calorimeter method for determination of heat release rate of imported and exported textiles

AASHTO - American Association of State Highway and Transportation Officials, Rapid Method for Determination of Thermal Diffusivity

TP11-1995 Standard Test Method for Rapid Determination of Corrosion Rate of Uncoated Steel in Reinforced Concrete (Edition 1C)

RU-GOST R, Rapid Method for Determination of Thermal Diffusivity

GOST 34374.2-2017 Plastics. Determination of thermal conductivity and thermal diffusivity. Part 2. Transient plane heat source (hot disc) method
GOST EN 12088-2011 Thermal insulating products in building applications. Method for determination of long-term moisture absorption by diffusion

Professional Standard - Commodity Inspection, Rapid Method for Determination of Thermal Diffusivity

SN/T 0482-1995 High-speed determination of true relative density,apparentrelative density and porosity of coke for export

Hebei Provincial Standard of the People's Republic of China, Rapid Method for Determination of Thermal Diffusivity

DB13/T 2768.5-2018 Graphene powder material testing method Part 5: Determination of thermal diffusivity flash method

The American Road & Transportation Builders Association, Rapid Method for Determination of Thermal Diffusivity

AASHTO TP11-1995 Standard Test Method for Rapid Determination of Corrosion Rate of Uncoated Steel in Reinforced Concrete 2000 Edition

YU-JUS, Rapid Method for Determination of Thermal Diffusivity

JUS M.E6.083-1982 Radiators, convectors and similar appliances. Determination of thermal output. Test method using opati booth
JUS M.E6.081-1980 Radiators convectors, and similar appliances. Determination of thermal output. Test method using air-cooled closed booth

国家能源局, Rapid Method for Determination of Thermal Diffusivity

SY/T 7607-2020 Rapid determination of hydrogen sulfide and tetrahydrothiophene in natural gas by gas chromatography with micro thermal conductivity

Canadian Standards Association (CSA), Rapid Method for Determination of Thermal Diffusivity

CSA P.11-07-2007 Testing method for measuring efficiency and energy consumption of gas-fired unit heaters First Edition

国家市场监督管理总局、中国国家标准化管理委员会, Rapid Method for Determination of Thermal Diffusivity

GB/T 41382-2022 Fire tests—Open calorimetry—Measurement of the rate of production of heat and combustion products for fires of up to 40MW