ZH
RU
ES

Metallographic test piece

Metallographic test piece, Total:499 items.

In the international standard classification, Metallographic test piece involves: Surface treatment and coating, Iron and steel products, Paint coating processes, Powder metallurgy, Production of metals, Telecommunication systems, Photography, Testing of metals, Agricultural machines, implements and equipment, Ferrous metals, Particle size analysis. Sieving, Non-ferrous metals, Fluid power systems, Non-destructive testing, Electrical accessories, Woodworking equipment, Adhesives, Products of non-ferrous metals, Printed circuits and boards, Rubber and plastics products, Semi-manufactures of timber, Non-textile floor coverings, Seals, glands, Corrosion of metals, Materials for aerospace construction, Integrated circuits. Microelectronics, Semiconducting materials, Pipeline components and pipelines, Pulps, Paper and board, Paints and varnishes, Mechanical testing, Cutting tools, Medical equipment, Building accessories, Cinematography, Welding, brazing and soldering, Optics and optical measurements, Linear and angular measurements, Rotating machinery, Packaging materials and accessories, Electricity. Magnetism. Electrical and magnetic measurements, Optical equipment, Glass, Metalliferous minerals, Protection against dangerous goods, Vocabularies, Semiconductor devices, Analytical chemistry, Fruits. Vegetables.

ZA-SANS, Metallographic test piece

SANS 5775:2004 Preparation of steel substrates before the application of paints and related products - Surface roughness characteristics of blast-cleaned steel surfaces - Profile of blast-cleaned surfaces determined by metallographic section

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Metallographic test piece

IPC MS-810-1993 Guidelines for High Volume Microsection
IPC TM-650 2.1.1.2-2004 Microsectioning-Semi or Automatic Technique Microsection Equipment (Alternate) Revision A
IPC TM-650 2.6.7.2-2004 Thermal Shock, Continuity and Microsection, Printed Board Revision B

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Metallographic test piece

GB/T 3488.1-2014 Hardmetals.Metallographic determination of microstructure.Part 1:Photomicrographs and description
GB/T 9037.2-1988 Measuring methods for photographic facsimile apparatus
GB/T 18117-2000 Photography-Processed photographic colour films and paper prints-Methods for measuring image stability
GB/T 6849-1995 Photographic films and papers--Wedge test for brittleness
GB/T 27795-2011 Test method for corrosion testing of non-metallic gaskets
GB/T 26871-2011 Metallographic examination of electrical contact materials
GB/T 20671.8-2006 Classification system and test methods for nonmetallic gasket materials-Part8:Standard test method for flexibility of non-metallic gasket materials
GB/T 27970-2011 Test method for weight loss of non-metallic gasket materials upon exposure to elevated temperatures
GB/T 20671.7-2006 Classification system and test methods for nonmetallic gasket materials-Part7:Standard test methods for tension testing of nonmetallic gasket materials
GB/T 20671.6-2006 Classification system and test methods for nonmetallic gasket materials-Part6:Standard test method for adhesion of gasket materials to metal surfaces
GB/T 20671.1-2006 Classification system and test methods for nonmetallic gasket materials-Part1:Standard classification system for nonmetallic gasket materials
GB/T 23901.3-2009 Non-destructive testing.Image quality of radiographs.Part 3:Image quality classes for ferrous metals
GB/T 20671.3-2006 Classification system and test methods for nonmetallic gasket materials-Part3:Standard test method for fluid resistance of gasket materials
GB/T 20671.4-2006 Classification system and test methods for nonmetallic gasket materials-Part4:Standard test method for sealability of gasket materials
GB/T 20671.5-2006 Classification system and test methods for nonmetallic gasket materials-Part5:Standard test method for creep relaxation of gasket materials
GB/T 20671.2-2006 Classification system and test methods for nonmetallic gasket materials-Part2:Standard test method for compressibility and recovery of gasket materials
GB/T 4194-1984 Creep testing,high temperature treatment and metallographic examination of the tungsten wires
GB/T 41654-2022 Corrosion of metals and alloys—Method for metallographic examination of samples after exposure to high-temperature corrosive environments
GB/T 20671.9-2006 Classification system and test methods for nonmetallic gasket materials-Part9:Standard test method for binder durability of cork composition gasket materials
GB/T 20832-2007 Metallic materials Designation of test specimen axes in relation to product texture
GB/T 20671.10-2006 Classification system and test methods for nonmetallic gasket materials-Part10:Standard practice for evaluating thermal conductivity of gasket materials
GB/T 24578-2015 Test method for measuring surface metal contamination on silicon wafers by total reflection X-Ray fluorescence spectroscopy
GB/T 24578-2009 Test method for measuring surface metal contamination on silicon wafers by total reflection X-ray fluorescence spectroscopy
GB 5929-1986 Thickness testing method of the metal deposits and conversion coatings for the light industrial products--Metallographic microscopic method
GB/T 21975-2008 Method of test for reliability of three-phase induction motors for crane and metallurgical application
GB/T 17006.3-2000 Evaluation and routine testing in medical imaging departments--Part 2-2 Constancy tests-Radiographic cassettes and film changers-Film-screen contact and relative sensitivity of the screen-cassette assembly
GB/T 21779-2008 Test method for particle size distribution of metal powders and related compounds by light scattering

RU-GOST R, Metallographic test piece

GOST 25536-1982 Metals scales of images on photographs at metallographec examination
GOST R IEC 61223-2-2-2001 Evaluation and routine testing in medical imaging departments. Part 2-2. Constancy tests. Radiographic cassettes and film changers. Film-screen contact and relative sensitivity of the screen-cassette assembly

(U.S.) Ford Automotive Standards, Metallographic test piece

FORD FLTM BJ 012-02-2001 VACUUM DIAPHRAGM COMPATIBILITY TEST

Professional Standard - Aviation, Metallographic test piece

HB 20113-2012 Metallographic examination for coatings of aero-engine blade
HB 5395-1988 Classification standard for elongated holes in X-ray photographic inspection of aluminum alloy castings (negative films not provided)
HB 5397-1988 Standard for X-ray photographic inspection of scattered looseness of aluminum alloy castings (negative film not provided)
HB 5396-1988 Classification standard for spongy porosity in X-ray examination of aluminum alloy castings (negative film not provided)

国家质量监督检验检疫总局, Metallographic test piece

SN/T 4564-2016 Preparation method of metallographic specimens for identification of grain orientation of electrical steel sheets (strips)
SN/T 4563-2016 Method for identification of grain orientation of electrical steel sheets (strips) Metallographic method

Taiwan Provincial Standard of the People's Republic of China, Metallographic test piece

CNS 2112-2005 Test pieces for tensile test for metallic materials
CNS 3940-1999 Bend test pieces for metallic materials
CNS 3033-2000 Test pieces for impact test for metallic materials
CNS 13100-1992 Test Pieces of Transverse Test for Metallic Materials
CNS 14122-1998 Corrosion of metals and alloys-Removal of corrosion products from corrosion test specimens
CNS 13402-2002 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates─ Rating of test specimens and manufactured articles subjected to corrosion tests
CNS 3710-1974 Methods of Radiographic Test and Classification of Radiographs for Steel Welds
CNS 13753-2005 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity

British Standards Institution (BSI), Metallographic test piece

BS EN ISO 4499-1:2020 Hardmetals. Metallographic determination of microstructure - Photomicrographs and description
PD ISO/TR 20580:2022 Preparation of metallographic specimens
BS EN ISO 4499-1:2010 Hardmetals - Metallographic determination of microstructure - Photomicrographs and description
BS EN 584-2:1997 Non-destructive testing. Industrial radiographic film. Control of film processing by means of reference values
BS ISO 18907:2013 Imaging materials. Photographic films and papers. Wedge test for brittleness
18/30369645 DC BS EN ISO 4499-1. Hardmetals. Metallographic determination of microstructure. Part 1. Photomicrographs and description
BS EN ISO 4536:1986 Metallic and non-organic coatings on metallic substrates - Saline droplets corrosion test (SD test)
BS ISO 5655:2000 Photography - Industrial radiographic films (roll and sheet) and metal intensifying screens - Dimensions
BS EN ISO 11699-2:2018 Tracked Changes. Non-destructive testing. Industrial radiographic films. Control of film processing by means of reference values
BS ISO 7539-10:2013 Corrosion of metals and alloys. Stress corrosion testing. Reverse U-bend method
BS ISO 3057:1998 Non-destructive testing - Metallographic replica techniques of surface examination
19/30385559 DC BS EN 13555. Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
BS 7725-2.2:1994 Evaluation and routine testing in medical imaging departments. Constancy tests. Method for radiographic cassettes and film changers and film-screen contact and relative sensitivity of the screen-cassette assembly
BS EN ISO 14096-2:2020 Non-destructive testing. Qualification of radiographic film digitisation systems - Minimum requirements
BS EN 2002-21:2019 Aerospace series. Metallic materials. Test methods - Radiographic testing of castings
PD ISO/PAS 18940-1:2023 Imaging materials. Image permanence specification of reflection photographic prints for indoor applications. Test methods
BS EN ISO 3785:2023 Metallic materials. Designation of test specimen axes in relation to product texture
19/30393097 DC BS EN ISO 11127-4. Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Part 4. Assessment of hardness by a glass slide test
BS EN 4526:2013 Aerospace series. Metallic materials. Test methods. Sharp edge-notch tensile testing for sheet and strip
BS EN 3684:2007 Aerospace series - Test methods - Titanium alloy wrought products - Determination of transus temperature - Metallographic method
20/30381921 DC BS ISO 18947-2. Imaging materials and prints. Abrasion resistance - Part 2. Rub testing of photographic prints
BS EN 12209:2003 Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods
BS EN ISO 17636-1:2022 Tracked Changes. Non-destructive testing of welds. Radiographic testing. X- and gamma-ray techniques with film
BS EN ISO 14096-1:2020 Non-destructive testing. Qualification of radiographic film digitisation systems - Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
BS ISO 26843:2015 Metallic materials. Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
BS ISO 12110-2:2013 Metallic materials. Fatigue testing. Variable amplitude fatigue testing. Cycle counting and related data reduction methods
BS EN ISO 10675-2:2021 Non-destructive testing of welds. Acceptance levels for radiographic testing - Aluminium and its alloys
22/30430480 DC BS EN ISO 3785. Metallic materials. Designation of test specimen axes in relation to product texture
BS EN 3863:2013 Aerospace series. Non-metallic materials. Glass transparencies. Test methods. Determination of flatness

Professional Standard - Machinery, Metallographic test piece

JB/T 9704-1999 Metallographic examination for smooth-edge knife of reciprocating mower
JB/T 9704-2010 Metallographic examination for smooth-edge knife of reciprocating mower
JB/T 9951-1999 Woodworking hard alloy discs Durability test
JB/T 9951-2015 Woodworking carbide circular saw blade durability test method
JB/T 56105-1999 Three-phase asynchronous motors intended to be used in hoisting and metallurgy work. Reliability test method

German Institute for Standardization, Metallographic test piece

DIN 50600:1980 Testing of metallic materials; Metallographic Micrographs; Picture scales and formats
DIN EN ISO 4499-1:2020-11 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2020); German version EN ISO 4499-1:2020
DIN EN 12681-1:2018-02 Founding - Radiographic testing - Part 1: Film techniques; German version EN 12681-1:2017
DIN ISO 3310-3:1992-02 Test sieves; technical requirements and testing; test sieves of electroformed sheets; identical with ISO 3310-3:1990
DIN EN ISO 4499-1:2018 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO/DIS 4499-1:2018); German and English version prEN ISO 4499-1:2018
DIN EN ISO 11699-1:2012 Non-destructive testing - Industrial radiographic films - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008); German version EN ISO 11699-1:2011
DIN 29995:1980 Aerospace; segregation testing on etched slices of remelted steels, nickel and cobalt alloys
DIN 51345:1986 Testing the compatibility of fire-resistant hydraulic fluids with metals
DIN EN 13555:2021-04 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections; German version EN 13555:2021
DIN 19051-20:1991-03 Test patterns for micrography; test exposures made to establish the conditions for microfilming of drawings
DIN EN ISO 11127-4:2021-05 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:2020); German version EN ISO 11127-4:2020
DIN EN ISO 4499-1:2020 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2020); German version EN ISO 4499-1:2020
DIN EN ISO 4499-1:2010 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2008); German version EN ISO 4499-1:2010
DIN 29995:1980-10 Aerospace; segregation testing on etched slices of remelted steels, nickel and cobalt alloys
DIN 15586-3:1985 Testing of mechanical properties of radiation sensitive film materials; determination of the dimensional change of photographic films and papers
DIN EN ISO 11127-4:2019 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO/DIS 11127-4:2019); German and English version prEN ISO 1
DIN 19051-21:1991-03 Test patterns for micrography; test exposures made to establish the conditions for microfilming of printed documents, literature and newspapers
DIN EN 3684:2007 Aerospace series - Test methods - Titanium alloy wrought products - Determination of βtransus temperature - Metallographic method; German and English version EN 3684:2007
DIN EN 2002-21:2020 Aerospace series - Metallic materials - Test methods - Part 21: Radiographic testing of castings; German and English version EN 2002-21:2019
DIN EN 3684:2007-07 Aerospace series - Test methods - Titanium alloy wrought products - Determination of <beta> transus temperature - Metallographic method; German and English version EN 3684:2007
DIN EN 12209:2016 Building hardware - Mechanically operated locks and locking plates - Requirements and test methods; German version EN 12209:2016
DIN EN 12209 Berichtigung 1:2006 Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods; German version EN 12209:2003, Corrigenda to DIN EN 12209:2004-03; German version EN 12209:2003/AC:2005
DIN EN ISO 9693:2020 Dentistry - Compatibility testing for metal-ceramic and ceramic-ceramic systems (ISO 9693:2019)
DIN 6868-11:1998 Image quality assurance in X-ray diagnostics - Part 11: Constancy testing of the imaging system and camera in X-ray cinematography
DIN EN ISO 3785:2023-08 Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2023); German version EN ISO 3785:2023
DIN ISO 4003:1990-10 Permeable sintered metal materials; determination of bubble test pore size; identical with ISO 4003:1977
DIN EN 14846:2008 Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods; English version of DIN EN 14846:2008-11
DIN EN ISO 5579:2014-04 Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (ISO 5579:2013); German version EN ISO 5579:2013

International Organization for Standardization (ISO), Metallographic test piece

ISO/TR 20580:2022 Preparation of metallographic specimens
ISO 4499-1:2020 Hardmetals — Metallographic determination of microstructure — Part 1: Photomicrographs and description
ISO 4499-1:2008 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description
ISO 5655:2000 Photography - Industrial radiographic films (roll and sheet) and metal intensifying screens - Dimensions
ISO 18907:2013 Imaging materials - Photographic films and papers - Wedge test for brittleness
ISO 9915:1992 Aluminium alloy castings; radiography testing
ISO 18907:2000 Imaging materials - Photographic films and papers - Wedge test for brittleness
ISO 5754:2023 Sintered metal materials, excluding hardmetals — Unnotched impact test piece
ISO/DIS 18946 Imaging materials — Reflection colour photographic prints — Method for testing humidity fastness
ISO/FDIS 18946:2023 Imaging materials — Reflection colour photographic prints — Method for testing humidity fastness
ISO 3785:2006 Metallic materials - Designation of test specimen axes in relation to product texture
ISO 11127-4:2020 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 4: Assessment of hardness by a glass slide test
ISO 7539-10:2013 Corrosion of metals and alloys - Stress corrosion testing - Part 10: Reverse U-bend method
ISO 3785:2023 Metallic materials — Designation of test specimen axes in relation to product texture
ISO/CD 7039 Metallic materials — Tensile testing — Method for evaluating changes of properties in a high-pressure gaseous environment using a hollow test piece
ISO/PAS 18940-1:2023 Imaging materials — Image permanence specification of reflection photographic prints for indoor applications — Part 1: Test methods
ISO 26843:2015 Metallic materials - Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
ISO 18189:2016 Ophthalmic optics - Contact lenses and contact lens care products - Cytotoxicity testing of contact lenses in combination with lens care solution to evaluate lens/solution interactions
ISO 10349-5:1992 Photography; photographic-grade chemicals; test methods; part 5: determination of heavy metal and iron content

Korean Agency for Technology and Standards (KATS), Metallographic test piece

KS B 0803-1977(1995) BEND TEST SPECIMEN FOR METALS
KS B 0803-1985 BEND TEST SPECIMEN FOR METALS
KS D 0241-2022 Aluminium alloy castings — Radiographic testing and classification of radiographs
KS D ISO 4499-1-2009(2019) Hardmetals－Metallographic determination of microstructure－Part 1：Photomicrographs and description
KS D 0070-2002 Method of test for magnetic properties of amorphous metals using single sheet specimen
KS D 0070-2002(2022) Method of test for magnetic properties of amorphous metals using single sheet specimen
KS D ISO 2740-2009(2019) Sintered metal materials, excluding hardmetals－Tensile test pieces
KS D ISO 2740:2009 Sintered metal materials, excluding hardmetals－Tensile test pieces
KS D 0070-2002(2017) Method of test for magnetic properties of amorphous metals using single sheet specimen
KS D ISO 9915:2007 Aluminium alloy castings－Radiography testing
KS B ISO 19232-3:2005 Non-destructive testing-Image quality of radiographs-Part 3:Image quality classes for ferrous metals
KS D ISO 5754-2002(2012) Sintered metal materials, excluding hardmetals－Unnotched impact test piece
KS M ISO 11127-4:2021 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 4: Assessment of hardness by a glass slide test
KS D ISO 22779:2009 Metallic coatings-Physical vapour-deposited coatings of aluminium-Specification and test methods
KS D ISO 22779:2013 Metallic coatings－Physical vapour-deposited coatings of aluminium－Specification and test methods
KS D ISO 2142-2002(2007) Wrought aluminium, magnesium and their alloys－Selection of specimens and test pieces for mechanical testing
KS B ISO 5579:2022 Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules
KS D ISO 22778:2009 Metallic coatings-Physical vapour-deposited coatings of cadmium on iron and steel-Specification and test methods
KS D ISO 22778:2013 Metallic coatings－Physical vapour-deposited coatings of cadmium on iron and steel－Specification and test methods

Danish Standards Foundation, Metallographic test piece

DS/ISO 18907:2013 Imaging materials - Photographic films and papers - Wedge test for brittleness
DS/EN ISO 4499-1:2010 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description
DS/EN 3684:2007 Aerospace series - Test methods - Titanium alloy wrought products - Determination of b (beta) transus temperature - Metallographic method
DS/EN 13555:2005 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
DS/EN 13555:2021 Flanges and their joints – Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
DS/EN ISO 11127-4:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test
DS/ISO 11127-4:2020 Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 4: Assessment of hardness by a glass slide test
DS/EN ISO 3785:2006 Metallic materials - Designation of test specimen axes in relation to product texture
DS/EN ISO 11127-4:2020 Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:2020)
DS/EN 3864:2013 Aerospace series - Non-metallic materials - Glass transparencies - Test methods - Determination of modulus of rupture

AT-ON, Metallographic test piece

ONORM EN 25580-1992 Non-destructive testing - Industrial radiographic illuminators -Minimum requirements
OENORM EN ISO 4499-1:2020 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2020)
OENORM EN ISO 11127-4:2021 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:2020)

Professional Standard - Aerospace, Metallographic test piece

QJ 3116-1999 X-ray photographic reference film for internal defects of metal fusion welding
QJ 1675-1989 Metallographic test method for deformed aluminum alloy overburning
QJ 1676-1989 Metallographic test method for cast aluminum alloy overburning
QJ 2337-1992 Metallographic test method of beryllium copper
QJ 2136.3-1991 Specimens for physical and chemical re-examination of metallic materials Specimens for metallographic examination

Standard Association of Australia （SAA）, Metallographic test piece

AS 2505.1:2004 Metallic materials - Sheet, strip and plate - Bend tests
AS 2331.3.11:2004 Methods of test for metallic and related coatings - Corrosion and related property tests - Chemical residue tests
AS 2331.3.2:2001 Methods of test for metallic and related coatings - Corrosion and related property tests - Acetic acid salt spray test (ASS test)
AS 2331.3.1:2001 Methods of test for metallic and related coatings - Corrosion and related property tests - Neutral salt spray (NSS) test
AS 2331.3.7:2004 Methods of test for metallic and related coatings - Corrosion and related property tests - Corrodkote (Corr) test (ISO 4541:1978, MOD)
AS 2331.1.1:2001 Methods of test for metallic and related coatings - Local thickness tests - Micrographic examination of cross-sections
AS 2331.3.13:2006 Methods of test for metallic and related coatings - Corrosion and related property tests - Wet (salt fog)/dry/humidity
AS 2505.3:2004 Metallic materials - Tubular products - Bend and related tests
AS 2331.3.3:2001 Methods of test for metallic and related coatings - Corrosion and related property tests - Copper accelerated acetic acid salt spray test (CASS test)
AS 2331.4.2:2004 Methods of test for metallic and related coatings - Physical tests - Ductility
AS 2331.3.12:2006 Methods of test for metallic and related coatings - Corrosion and related property tests - Cyclic salt fog/UV exposure of organically coated metal
AS 1580.504.1:2005 Paints and related materials - Methods of test - Metallic zinc content
AS 2331.4.7:2006 Methods of test for metallic and related coatings - Physical tests - Resistance to scratching
AS 2331.1.3:2001 Methods of test for metallic and related coatings - Local thickness tests - Magnetic method
AS 1580.105.2:2002(R2013)
AS 2331.1.6:2004 Methods of test for metallic and related coatings - Local thickness tests - Taper section method
AS 2331.0:2006 Methods of test for metallic and related coatings - Method selection guide
AS 1580.105.2:2002 Paints and related materials - Methods of test - Pretreatment of metal test panels - Sanding
AS 2331.1.2:2001 Methods of test for metallic and related coatings - Local thickness tests - Coulometric method
AS 1580.105.1:2002(R2013)
AS 1580.105.1:2002 Paints and related materials - Methods of test - Pretreatment of metal test panels - Solvent cleaning
AS 2331.1.4:2001 Methods of test for metallic and related coatings - Local thickness tests - Magnetic induction and eddy current methods
AS 2331.0:2001 Methods of test for metallic and related coatings Part 0: Introduction and list of methods
AS 2177.1:1994 Non-destructive testing - radiography of welded butt joints in metal Part 1: Methods of test

European Committee for Standardization (CEN), Metallographic test piece

EN ISO 11699-1:2011 Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008)
EN ISO 4499-1:2020 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2020)
prEN 584-1-1991 Non destructive testing; industrial radiographic film; part 1: classification of film systems for industrial radiography
EN ISO 4499-1:2010 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2008)
EN ISO 5754:2023 Sintered metal materials, excluding hardmetals - Unnotched impact test piece (ISO 5754:2023)
EN ISO 3785:2023 Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2023)
EN 3684:2007 Aerospace series - Test methods - Titanium alloy wrought products - Determination of β transus temperature - Metallographic method
FprEN ISO 3785 Metallic materials - Designation of test specimen axes in relation to product texture (ISO/FDIS 3785:2023)
EN 3863:2013 Aerospace series - Non-metallic materials - Glass transparencies - Test methods - Determination of flatness

American Society for Testing and Materials (ASTM), Metallographic test piece

ASTM E930-99 Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
ASTM E930-99(2007) Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
ASTM E930-99(2015) Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
ASTM E3-11 Standard Guide for Preparation of Metallographic Specimens
ASTM E3-01(2007) Standard Guide for Preparation of Metallographic Specimens
ASTM E3-95 Standard Practice for Preparation of Metallographic Specimens
ASTM E1558-99(2004) Standard Guide for Electrolytic Polishing of Metallographic Specimens
ASTM E1558-99 Standard Guide for Electrolytic Polishing of Metallographic Specimens
ASTM E1558-09(2014) Standard Guide for Electrolytic Polishing of Metallographic Specimens
ASTM E1558-09 Standard Guide for Electrolytic Polishing of Metallographic Specimens
ASTM E1815-96 Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM E1815-96(2001) Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM E1815-18 Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM E3-01 Standard Practice for Preparation of Metallographic Specimens
ASTM E1815-18(2023) Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM E1724-95(2001) Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials
ASTM E1724-95 Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials
ASTM F147-87(1997) Standard Test Method for Flexibility of Non-Metallic Gasket Materials
ASTM D3380-90(2003) Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
ASTM E1815-06 Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM E1815-08(2013)e1 Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM A1079-13e1 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM B657-92(1996)e1 Standard Test Method for Metallographic Determination of Microstructure in Cemented Tungsten Carbides
ASTM B657-92(2000) Standard Test Method for Metallographic Determination of Microstructure in Cemented Tungsten Carbides
ASTM E746-02 Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM E746-93(1998) Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM D2247-68(1973) Standard Method for Testing Coated Metal Specimens At 100% Relative Humidity
ASTM A1079-13e2 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM E1030-05(2011) Standard Test Method for Radiographic Examination of Metallic Castings
ASTM E251-20 Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM D4627-92(2002) Standard Test Method for Iron Chip Corrosion for Water8212;Dilutable Metalworking Fluids
ASTM D4627-92(2007) Standard Test Method for Iron Chip Corrosion for Water-Dilutable Metalworking Fluids
ASTM E251-20a Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM D4627-12 Standard Test Method for Iron Chip Corrosion for Waterndash;Miscible Metalworking Fluids
ASTM E1735-07 Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MeV
ASTM A923-22 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
ASTM A923-23 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
ASTM E1030-00 Standard Test Method for Radiographic Examination of Metallic Castings
ASTM E1030-05 Standard Test Method for Radiographic Examination of Metallic Castings
ASTM B931-14 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy &40;PM&41; Parts
ASTM F358-83(1996)e1 Standard Test Method for Wavelength of Peak Photoluminescence and the Corresponding Composition of Gallium Arsenide Phosphide Wafers
ASTM F358-83(2002) Standard Test Method for Wavelength of Peak Photoluminescence and the Corresponding Composition of Gallium Arsenide Phosphide Wafers
ASTM E2194-14(2021) Standard Test Method for Multiangle Color Measurement of Metal Flake Pigmented Materials
ASTM E2194-14(2017) Standard Test Method for Multiangle Color Measurement of Metal Flake Pigmented Materials
ASTM A923-98 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels
ASTM A923-01e1 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels
ASTM A923-03 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels
ASTM B931-14(2018)e1 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts
ASTM B765-93(2001) Standard Guide for Selection of Porosity Tests for Electrodeposits and Related Metallic Coatings
ASTM B765-93(1997) Standard Guide for Selection of Porosity Tests for Electrodeposits and Related Metallic Coatings
ASTM E398-20 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
ASTM B330-00 Standard Test Method for Fisher Number of Metal Powders and Related Compounds
ASTM B330-20 Standard Test Method for Fisher Number of Metal Powders and Related Compounds
ASTM E1735-07(2014) Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MeV
ASTM E2194-14 Standard Test Method for Multiangle Color Measurement of Metal Flake Pigmented Materials
ASTM G150-18 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels and Related Alloys
ASTM E398-13 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
ASTM E2295-13 Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels
ASTM G113-01 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ASTM G113-94 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ASTM G113-05 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ASTM E747-97 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology
ASTM G113-06 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ASTM G113-03 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ASTM G113-06e1 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ASTM G113-08 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ASTM B610-08 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders
ASTM G113-09 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ASTM G113-14 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ASTM B610-13 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders
ASTM A309-01(2012) Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
ASTM E1949-03 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
ASTM F390-98 Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array
ASTM E1949-03(2014) Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
ASTM E1949-03(2014)e1 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
ASTM E1949-21 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
ASTM B931-03 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (P/M) Parts
ASTM B931-09 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (P/M) Parts
ASTM B931-23 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts
ASTM B822-97 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM B822-02 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM E1387-01 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography
ASTM B330-05 Standard Test Method for Fisher Number of Metal Powders and Related Compounds
ASTM B330-07 Standard Test Method for Fisher Number of Metal Powders and Related Compounds
ASTM F1659-95 Standard Test Method for Bending and Shear Fatigue Testing of Calcium Phosphate Coatings on Solid Metallic Substrates
ASTM A1012-10(2021) Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
ASTM A1012-10(2015) Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
ASTM B330-02 Standard Test Method for Fisher Number of Metal Powders and Related Compounds
ASTM E2295-21 Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels
ASTM E2294-21 Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry

工业和信息化部, Metallographic test piece

YS/T 370-2018 Preparation methods of metallographic samples of precious metals and their alloys

RO-ASRO, Metallographic test piece

STAS 10952/1-1977 Metal welding METALLOGRAPHICAL TEST OF FUSION WELDED JOINTS
STAS SR ISO 9915:1995 Aluminium alloy castings. Radiography testing
STAS 10952/2-1978 METALLOGRAPHICAL TEST OF PRESSURE WELDED JOINTS
STAS R 11682-1983 Mrtals chip removing process RESTS, CENTRING ELEMENTS CLAMPINGS Symbolization
STAS 10456-1975 Tests of metals DETERMINATION OF ALPHA PHASE CONTENT IN STAINLESS AUSTENITICAL STEELS
STAS SR ISO 3057:1993 Non-destructive testing. Metallographic replica techniques of surface examination
STAS ISO 2875:1992 Packaging. Complete, filled transport packages. Water spray test
STAS 12030/9-1986 GENERAL USE MACHINE-TOOLS FOR METALS CUTTING TEST PIECES FOR ACCURACY CHECKING UP Checking metnods of front knocking
STAS 12030/8-1986 General use machinetools for metals cutting Test pieces for accuracy checking up CHECKING Up METHODS OF DIMENSIONS CONSTANT OF CYLINDRICAL PIECES

SE-SIS, Metallographic test piece

SIS SS 3136-1984 Metallic spiral-wound gaskets - Compression testing
SIS SS 3136-1987 Pipe flanges - Sealing devices - Metallic spiral wound gaskets - Compression testing
SIS SS 06 13 01-1990 Consumables — Wire electrodes and fluxes for submerged-arc welding of carbon steels, carbon-manganese steels, microalloyed steel and low-alloyed steels — Weld metal test specimens for all-weld-metal tests
SIS SS 06 11 01-1990 Welding electrodes — Wire electrodes and tubular wires for gas metal arc welding and metal arc welding of carbon steel, carbon-manganese alloyed steel, microalloyed steel and low-alloyed steel — Weld metal test specimens for all-weld-metal tests
SIS SS-ISO 4516:1986 Metallic and related coatings - Vickers and Knoop microhardness tests

CU-NC, Metallographic test piece

NC 05-07-1986 Metallography. Microstructure of Hard Alloy Metals. Testing Method
NC 05-08-1986 Metallography. Determination of Metals Grain Size, Testing Method
NC 04-77-1986 Materials Testing. Content Determination of Alpha Phase in Austenitic Steels. Metallographic Analysis
NC 08-13-1986 Welding. Resilience and Traction Test on Adding Metal Test Pieces. General Requirements

Professional Standard - Non-ferrous Metal, Metallographic test piece

YS/T 370-2006 Precious metals and alloys.Preparation method for metallographic samples

VN-TCVN, Metallographic test piece

TCVN 5052-1-2009 Hardmetals.Metallographic determination of microstructure.Part 1: Photomicrographs and description

Association Francaise de Normalisation, Metallographic test piece

NF A95-186-1:2010 Hardmetals - Metallographic determination of microstructure - Part 1 : photomicrographs and description.
NF A95-186-1*NF EN ISO 4499-1:2020 Hardmetals - Metallographic determination of microstructure - Part 1 : photomicrographs and description
NF A04-190-1*NF EN 12681-1:2017 Founding - Radiographic testing - Part 1 : Film techniques
FD E29-753:2014 Gas cylinders - Hydrogen compatibility testing for metals
NF T76-201:1982 Adhesives. Preparation of metallic substrates for testpieces intended for laboratory tests.
NF E23-903:2021 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
NF EN 13555:2021 Brides et leurs assemblages - Paramètres de joints et procédures d'essai relatives aux règles de calcul des assemblages à brides circulaires avec joint
NF P30-305:1995 Building covering. Extruded mastic sealing strips for metallic roofing. Specifications. Test.
NF EN ISO 3785:2023 Matériaux métalliques - Désignation des axes des éprouvettes en relation avec la texture du produit
NF T35-509-4:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4 : assessment of hardness by a glass slide test.
NF T35-509-4:2020 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4 : assessment of hardness by a glass slide test
NF T35-509-4:1997 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Part 4 : assessment of hardness by a glass slide test.
NF A09-223:1985 Non-destructive testing. Industrial radiology. Identification card for radiographic film used with fluorometallic fluorescent intensifier screens.
NF ISO 22779:2007 Revêtements métalliques - Revêtements d'aluminium déposés physiquement en phase vapeur - Spécification et méthodes d'essai
NF L17-018*NF EN 4526:2013 Aerospace series - Metallic materials - Test methods - Sharp edge-notch tensile testing for sheet and strip
NF R12-617*NF ISO 6315:1988 Road vehicles. Brake linings. Seizure to ferrous mating surface due to corrosion. Test procedure.
NF L10-806*NF EN 3684:2007 Aerospace series - Test methods - Titanium alloy wrought products - Determination of beta transus temperature - Metallographic method.
NF EN ISO 5579:2014 Essais non destructifs - Contrôle radiographique des matériaux métalliques au moyen de film et de rayons X et gamma - Règles de base
NF EN ISO 9693:2019 Médecine bucco-dentaire - Essais de compatibilité pour systèmes métallo-céramiques et céramo-céramiques
NF S10-023*NF ISO 12844:2000 Raw optical glass - Grindability with diamond pellets - Test method and classification.
NF L10-007-21*NF EN 2002-21:2019 Aerospace series - Metallic materials - Test methods - Part 21 : radiographic testing of castings
NF EN 3684:2007 Série aérospatiale - Méthodes d'essais - Demi-produits corroyés en alliages de titane - Détermination de la température de transus bêta - Méthode métallographique
NF P26-333*NF EN 14846:2008 Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods
NF ISO 22778:2007 Revêtements métalliques - Revêtements de cadmium déposés physiquement en phase vapeur sur le fer et l'acier - Spécification et méthodes d'essai
NF EN 3863:2013 Série aérospatiale - Matériaux non-métalliques - Transparents en verre - Méthodes d'essais - Détermination de la planéité
NF S91-141:1990 BIODEGRADABILITY OF DENTAL ALLOYS. STANDARDIZATION OF ELECTROCHEMICAL TESTS.

ES-UNE, Metallographic test piece

UNE-EN ISO 4499-1:2021 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2020)
UNE-EN 12681-1:2018 Founding - Radiographic testing - Part 1: Film techniques
UNE-EN 13555:2021 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
UNE-EN ISO 11127-4:2021 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:2020)
UNE-EN 3684:2007 Aerospace series - Test methods - Titanium alloy wrought products - Determination of ß transus temperature - Metallographic method (Endorsed by AENOR in June of 2007.)
UNE-EN 3863:2013 Aerospace series - Non-metallic materials - Glass transparencies - Test methods - Determination of flatness (Endorsed by AENOR in March of 2013.)

BE-NBN, Metallographic test piece

NBN-EN 10237-1994 Metallic materials. Tube. Ring tensile test
NBN A 11-143-1964
NBN 862-1971

Association of German Mechanical Engineers, Metallographic test piece

DVS 2310-1-1984 Instruction for metallographic section manufacture and evaluation of thermally sprayed layers under the light-optical microscope
DVS 2310-2-1989
VDI/VDE 2635 Blatt 1-2015 Experimental structure analysis - Metallic bonded resistance strain gauges - Characteristics and testing conditions

PL-PKN, Metallographic test piece

PN M55552-1986 Metal cutting machin? tools Test pieces for accuracy test General r??uirements
PN-EN ISO 4499-1-2021-02 E Hardmetals -- Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2020)
PN M55551-33-1987 Metal cutting machin? tools Methods of measurement of face run-out of test piece
PN-EN 13555-2021-07 E Flanges and their joints -- Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
PN-EN ISO 11127-4-2021-03 E Preparation of steel substrates before application of paints and related products--Test methods for non-metallic blast-cleaning abrasives--Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:2020)
PN C99282-11-1993 Photography. Industrial radiographic film. Determination of ISO speed and ISO average gradient when exposed to X- and gamma-radiation

GM North America, Metallographic test piece

GM GM9617P-1988 Corrosion Test for Sheet Metal Forming Lubricants
GM GM9532P-1989 Crater Resistance Test for Sheet Metal Forming Lubricants
GM GM9615P-1988 Panel Preparation for Weld Compatibility Test for a Sheet Metal Forming Lubricant

Japanese Industrial Standards Committee (JISC), Metallographic test piece

JIS H 0543:2014 Testing method of determining bendability for magnesium alloy sheets
JIS K 6894:2014 Testing methods for fluoroplastic coating film on metal substrate
JIS H 8686:1994 Test methods for image clarity of anodic oxide coating on aluminium and aluminium alloys
JIS Z 4752-2-2:2001 Evaluation and routine testing in medical imaging departments -- Part 2-2: Constancy tests -- Radiographic cassettes and film changers -- Film-screen contact and relative sensitivity of the screen-cassette assembly

CZ-CSN, Metallographic test piece

CSN ISO 10977:1994 Photography-Processed photographic colour films and paper prints-Methods for measuring image stability
CSN ISO 9915:1994 Aluminium alloy castings. Radiography testing
CSN ISO 8490:1994 Metallic materials.Sheet and strip.Modified Erichsen cupping test
CSN 42 0466-1996 Preparation of metallographic specimens from copper, aluminium, their alloys and copper and aluminium-matrix composites
CSN 77 1500-1986 Thin sheet metal packages Packaging and transport on fiat pallets Specification and testing
CSN ISO 5579:1994 Non-destructive testing. Radiographic examination of metallic materials by X-and gamma rays. Basic rules
CSN 36 4723-1987 Medical image intensifier foils — Basic technical data — General technical reguircments and methods of testing

Lithuanian Standards Office , Metallographic test piece

LST EN ISO 4499-1:2010 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2008)
LST EN 13555-2005 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
LST EN 13555-2021 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
LST EN 25754-2002 Sintered metal materials, excluding hardmetals - Unnotched impact test piece (ISO 5754:1978)
LST EN ISO 11127-4:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:2011)
LST EN ISO 11127-4:2021 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:2020)
LST EN 3684-2007 Aerospace series - Test methods - Titanium alloy wrought products - Determination of ? transus temperature - Metallographic method
LST EN ISO 3785:2006 Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2006)

AENOR, Metallographic test piece

UNE-EN ISO 4499-1:2011 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2008)
UNE-EN 13555:2014 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
UNE-EN 25754:1999 Sintered metal materials, excluding hardmetals - Unnotched impact test piece (ISO 5754:1978)
UNE-EN ISO 11127-4:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:2011)
UNE-EN ISO 3785:2007 Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2006)

YU-JUS, Metallographic test piece

JUS C.A5.025-1991 Metal11c and otber non-organlc coatings on metal11c substrates. Sallne droplets corroslon test (SD test)
JUS N.M6.090-1985 Hand-held motor-operatedelectric tools. Sheetmetal shears. Supplementary reguirements andtests
JUS C.A4.083-1995 Mechanical testing of metals - Elementary concepts and properties relating to fractrure testing

国家市场监督管理总局、中国国家标准化管理委员会, Metallographic test piece

GB/T 20671.6-2020 Classification system and test methods for nonmetallic gasket materials—Part 6: Standard test method for adhesion of gasket materials to metal surfaces
GB/T 20671.1-2020 Classification system and test methods for nonmetallic gasket materials—Part 1：Standard classification system for nonmetallic gasket materials
GB/T 20671.3-2020 Classification system and test methods for nonmetallic gasket materials—Part 3: Standard test method for fluid resistance of gasket materials
GB/T 20671.5-2020 Classification system and test methods for nonmetallic gasket materials—Part 5: Standard test method for creep relaxation of gasket materials
GB/T 41356-2022 Superabrasive products—Test method for cutting performance of diamond circular saw blades
GB/T 19346.3-2021 Methods of measurement of amorphous and nanocrystalline alloys—Part 3： AC magnetic properties of Fe-based amorphous strip using a single sheet specimen
GB/T 4334-2020 Corrosion of metals and alloys－Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels
GB/T 37306.2-2019 Metallic materials—Fatigue testing—Variable amplitude fatiguetesting—Part 2: Cycle counting and related data reduction methods

PT-IPQ, Metallographic test piece

NP EN 13329-2001 Laminate floor coverings Specifications,requirements and test methods
NP 2176-1986
NP EN 1670-2000 Building hardware Corrosion resistance Requirements and test methods
NP EN 1597-1-2000 Welding consumables Test methods Part 1:Test piece for all-weld metal test specimens in steel,nickel and nickel alloys

IN-BIS, Metallographic test piece

WRC - Welding Research Council, Metallographic test piece

BULLETIN 438-1999 INTERMETALLIC PHASE PRECIPITATION IN DUPLEX STAINLESS STEELS AND WELD METALS: METALLURGY@ INFLUENCE ON PROPERTIES@ WELDING AND TESTING ASPECTS

Indonesia Standards, Metallographic test piece

SNI ISO 5579:2014 Uji tak rusak - Uji radiografi bahan logam menggunakan film dan sinar-X atau sinar gamma - Aturan dasar
SNI 07-6734-2002 Test methods for plastic straint, ratio r for sheet metals

American National Standards Institute （ANSI), Metallographic test piece

ANSI/ASTM D3380:2010 Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Plastic-based Microwave Circuit Substrates
ANSI/TAPPI T402 sp-2013 Standard conditioning and testing atmospheres for paper, board, pulp handsheets, and related products
ANSI J-STD-002-1992 Solderability tests for component leads, terminations, lugs, terminals and wires

IT-UNI, Metallographic test piece

UNI 3666-1965 Corrosion of metallic materials. General testing specifications.
UNI EN 13555-2021 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
UNI EN ISO 11127-4:2021 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test
UNI 7686-1977

American Welding Society (AWS), Metallographic test piece

WRC 438:1999 Intermetallic Phase Precipitation in Duplex Stainless Steels and Weld Metals: Metallurgy, Influence on Properties, Welding and Testing Aspects

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Metallographic test piece

PREN 3684-1994 Aerospace Series Test Methods Titanium Alloy Wrought Products Determination of B Transus Temperature Metallographic Method (Issue P1)
PREN 3684-1996 Aerospace Series Test Methods Titanium Alloy Wrought Products Determination of Beta Ray Transus Temperature Metallographic Method (Edition P 1)
PREN 3877-1997 Aerospace Series Metallic Materials Test Method Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis of Braze Alloys (Edition P 1)
PREN 2002-21-1999 Aerospace Series Metallic Materials Test Methods Part 21: Radiographic Testing of Castings (Edition P2)
PREN 3877-1993 Aerospace Series Test Method for Braze Alloys Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis
PREN 2002-21-2000 Aerospace Series Metallic Materials Test Methods Part 21: Radiographic Testing of Castings (Edition P 2)

Defense Logistics Agency, Metallographic test piece

DLA SMD-5962-96803-1996 MICROCIRCUIT, DIGITAL, ADVANCED HIGH SPEED CMOS, HEX INVERTER, MONOLITHIC SILICON
DLA SMD-5962-96804 REV B-1997 MICROCIRCUIT, DIGITAL, ADVANCED HIGH SPEED CMOS HEX INVERTER, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96805 REV A-2005 MICROCIRCUIT, DIGITAL, ADVANCED HIGH SPEED CMOS, HEX INVERTER, MONOLITHIC SILICON
DLA SMD-5962-96664 REV C-2000 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, CMOS, MICROPOWER PHASE LOCKED LOOP, MONOLITHIC SILICON
DLA SMD-5962-96653 REV C-2003 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, CMOS, HEX INVERTER, MONOLITHIC SILICON
DLA SMD-5962-95725 REV B-2000 MICROCIRCUIT, DIGITAL, RADIATION HARDENED HIGH SPEED CMOS, HEX INVERTER, MONOLITHIC SILICON
DLA SMD-5962-96801 REV B-2003 MICROCIRCUIT, DIGITAL, ADVANCED HIGH SPEED CMOS HEX SCHMITT TRIGGER INVERTER, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96802 REV B-2005 MICROCIRCUIT, DIGITAL, ADVANCED HIGH SPEED CMOS, HEX SCHMITT-TRIGGER INVERTER, MONOLITHIC SILICON
DLA SMD-5962-91725 REV A-2008 MICROCIRCUIT, DIGITAL, BIPOLAR CMOS, SCAN TEST DEVICE WITH OCTAL D-TYPE LATCH, THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-94664 REV A-2006 MICROCIRCUIT, DIGITAL, CMOS, MICROPOWER PHASE-LOCKED-LOOP, MONOLITHIC SILICON
DLA SMD-5962-96524 REV E-2004 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, ADVANCED CMOS, HEX INVERTER SCHMITT TRIGGER, MONOLITHIC SILICON
DLA SMD-5962-96530 REV B-2005 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, ADVANCED CMOS, HEX NONINVERTING BUFFER, MONOLITHIC SILICON
DLA SMD-5962-96636 REV E-2005 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, CMOS, INVERTING HEX BUFFER/ CONVERTER, MONOLITHIC SILICON
DLA SMD-5962-96517 REV D-2007 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, ADVANCED CMOS, HEX INVERTER, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96637 REV C-2003 MICROCIRCUIT, DIGITAL, RADIATION HARDENED CMOS, NON-INVERTING HEX BUFFER/CONVERTER, MONOLITHIC SILICON
DLA SMD-5962-96797 REV C-2004 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, HIGH SPEED CMOS, NON-INVERTING OCTAL BUS TRANSCEIVER WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-96813 REV A-2007 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, HEX INVERTER SCHMITT TRIGGER, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96705 REV C-2000 MICROCIRCUIT, DIGITAL, RADIATION HARDENED ADVANCED CMOS, NONINVERTING QUAD BUFFER WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-96807-1996 MICROCIRCUIT, DIGITAL, ADVANCED HIGH SPEED CMOS, OCTAL BUFFER/DRIVER WITH INVERTING THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-95719 REV C-2004 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, HIGH SPEED CMOS, HEX INVERTING SCHMITT TRIGGER, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-91746 REV A-2008 MICROCIRCUIT, DIGITAL, BIPOLAR CMOS, SCAN TEST DEVICE WITH OCTAL BUFFER, INVERTING THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-88757 REV B-2006 MICROCIRCUIT, DIGITAL, HIGH-SPEED CMOS, PHASE-LOCKED-LOOP WITH VOLTAGE CONTROLLED OSCILLATOR, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95732 REV B-2000 MICROCIRCUIT, DIGITAL, RADIATION HARDENED HIGH SPEED CMOS, HEX INVERTER, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95681 REV B-2000 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, HIGH SPEED CMOS, HEX INVERTING SCHMITT TRIGGER, MONOLITHIC SILICON
DLA SMD-5962-95803 REV A-1998 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, HIGH SPEED CMOS, NONINVERTING QUAD BUFFER WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON

European Association of Aerospace Industries, Metallographic test piece

AECMA PREN 3684-1994 Aerospace Series Test Methods Titanium Alloy Wrought Products Determination of B Transus Temperature Metallographic Method Issue P1
AECMA PREN 3684-1996 Aerospace Series Test Methods Titanium Alloy Wrought Products Determination of Beta Ray Transus Temperature Metallographic Method Edition P 1
AECMA PREN 4526-2000 Aerospace Series Metallic Materials Test Methods Sharp Edge-Notch Tensile Testing for Sheet and Strip Edition P 1
AECMA PREN 2002-21-1987 Aerospace Series Test Methods for Metallic Materials Part 21 - Radiographic Testing of Cast Components Issue P 1
AECMA PREN 2002-21-1999 Aerospace Series Metallic Materials Test Methods Part 21: Radiographic Testing of Castings Edition P2
AECMA PREN 2002-21-2000 Aerospace Series Metallic Materials Test Methods Part 21: Radiographic Testing of Castings Edition P 2

Group Standards of the People's Republic of China, Metallographic test piece

T/IAWBS 018-2022 Test method for dislocation density of diamond single crystal polished wafers
T/IAWBS 017-2022 Test method for full width at half maximum of double crystal X-rayrocking curve of diamond single crystal substrate

KR-KS, Metallographic test piece

KS B 5261-2003(2023)
KS B 5530-2003(2023)
KS B ISO 4547-2003(2023)
KS M ISO 11127-4-2021 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 4: Assessment of hardness by a glass slide test
KS D ISO 22779-2009 Metallic coatings－Physical vapour-deposited coatings of aluminium－Specification and test methods
KS B ISO 5579-2022 Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules
KS D ISO 22778-2009 Metallic coatings－Physical vapour-deposited coatings of cadmium on iron and steel－Specification and test methods
KS B 5544-2003(2023)

TR-TSE, Metallographic test piece

TS 2310-1976 Non- Destructive Testing- Metallographic Replica Technigues of Surface examination

International Electrotechnical Commission (IEC), Metallographic test piece

IEC TR2 61223-2-2:1993 Evaluation and routine testing in medical imaging departments; part 2-2: constancy tests; radiographic cassettes and film changers; film-screen contact and relative sensitivity of the screen-cassette assembly

FI-SFS, Metallographic test piece

SFS 2899-1973

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Metallographic test piece

GB/T 4194-2017 Creep testing, high temperature treatment and metallographic examination of the tungsten wire
GB/T 19346.2-2017 Methods of measurement for amorphous and nanocrystalline alloys—Part 2: Lamination factor of amorphous alloy strips

Society of Motion Picture and Television Engineers (SMPTE), Metallographic test piece

SMPTE RP 64-1999 Specifications for Audio-Focusing Test Film for 35-mm Audio Reproducers, Photographic Type

IEC - International Electrotechnical Commission, Metallographic test piece

TS 61223-2-2-1993 Evaluation and Routine Testing in Medical Imaging Departments - Part 2-2: Constancy Tests - Radiographic Cassettes and Film Changers - Film-Screen Contact and Relative Sensitivity of the Screen-Cassette Assembly (Edition 1.0; AS/NZS 4184.2.2: 1994)

American Society of Mechanical Engineers (ASME), Metallographic test piece

ASME SEC V B SE-1815-2002 Standard Test Method for Classification of Film Systems for Industrial Radiography ASTM E1815-96; DELETED

Shandong Provincial Standard of the People's Republic of China, Metallographic test piece

DB37/T 4166-2020 Requirements and test methods for blue light transmittance of anti-blue light glasses lenses and related eyewear products

Guangdong Provincial Standard of the People's Republic of China, Metallographic test piece

DB44/T 2034-2017 Requirements and test methods for blue light transmittance of anti-blue light glasses lenses and related eyewear products

CH-SNV, Metallographic test piece

SN EN ISO 11127-4:2021 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:2020)

Professional Standard - Light Industry, Metallographic test piece

QB/T 3817-1999 Thickness testing method of the metal deposits and conversion coatings for the light industrial products.Metallographic microscopic method

Aerospace, Security and Defence Industries Association of Europe (ASD), Metallographic test piece

ASD-STAN PREN 3877-1997 Aerospace Series Metallic Materials Test Method Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis of Braze Alloys (Edition P 1)
ASD-STAN PREN 2951-1997 Aerospace Series Metallic Materials Test Method Micrographic Determination of Content of Non-Metallic Inclusions (Edition P 1)

国家药监局, Metallographic test piece

YY/T 1771-2021 Bending-free recovery method to test the phase transition temperature of nickel-titanium shape memory alloy

Institute of Electrical and Electronics Engineers (IEEE), Metallographic test piece

RP 70:2002 RP 70:2002 - SMPTE Recommended Practice - Specifications for Flutter Test Film for 16-mm Audio Reproducers, Photographic Type
RP 97:2002 RP 97:2002 - SMPTE Recommended Practice - Specifications for Flutter Test Film for 35-mm Audio Reproducers, Photographic Type
SMPTE RP 64:1999 RP 64:1999 - SMPTE Recommended Practice - Specifications for Audio-Focusing Test Film for 35-mm Audio Reproducers, Photographic Type
SMPTE RP 97:2002 RP 97:2002 - SMPTE Recommended Practice - Specifications for Flutter Test Film for 35-mm Audio Reproducers, Photographic Type
SMPTE RP 70:2002 RP 70:2002 - SMPTE Recommended Practice - Specifications for Flutter Test Film for 16-mm Audio Reproducers, Photographic Type
RP 63:2002 RP 63:2002 - SMPTE Recommended Practice - Specifications for Sound-Focusing Test Film for 16-mm Audio Reproducers, Photographic Type
RP 67:2002 RP 67:2002 - SMPTE Recommended Practice - Specifications for Buzz-Track Test Film for 16-mm Motion-Picture Audio Reproducers, Photographic Type

Professional Standard - Commodity Inspection, Metallographic test piece

SN/T 1895-2007 Rapid enumeration of Staphylococcus aureus in foods.petrifilm staph express count plate method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Metallographic test piece

GJB 5383.16-2005 Test methods of sensitivity and stability for pyrotechnic. Part 16: Test for compatibility. Corrosion metal method

Canadian General Standards Board （CGSB), Metallographic test piece

CGSB 1-GP-71 METH 98.3-1982 Methodes D'Essai Des Peintures Et Pigments Revetement Des Plaques En Metal Et En Verre Aux Fins D'Essai

ES-AENOR, Metallographic test piece

BELST, Metallographic test piece

STB 1428-2003 Non-destructive testing. Welded joints of pipelines and metal constructions. Radiographic method

US-MSFC, Metallographic test piece

MSFC-PROC-3257-2002 OUTGASSING TEST PROCEDURE FOR NON-METALLIC MATERIALS ASSOCIATED WITH CONTAMINATION SENSITIVE SURFACES IN A THERMAL VACUUM ENVIRONMENT

未注明发布机构, Metallographic test piece

BS EN 62374-1:2010(2011) Semiconductor devices Part 1 : Time - dependent dielectric breakdown (TDDB) test for inter - metal layers