ZH
RU
ES

What instrument is used for gas measurement

What instrument is used for gas measurement, Total:459 items.

In the international standard classification, What instrument is used for gas measurement involves: Mining equipment, Measurement of fluid flow, Ergonomics, Alarm and warning systems, Measurement of volume, mass, density, viscosity, Electrical equipment for working in special conditions, Electromagnetic compatibility (EMC), Internal combustion engines for road vehicles, Electrical engineering in general, Explosion protection, Linear and angular measurements, Metrology and measurement in general, Radiation protection, Radiation measurements, Measurement of force, weight and pressure, Non-destructive testing, Electricity. Magnetism. Electrical and magnetic measurements, Analytical chemistry, Items of art and handicrafts, Protection against fire, Nuclear energy engineering, Medical equipment, Law. Administration, Air quality, Vocabularies, Ventilators. Fans. Air-conditioners, Welding, brazing and soldering, Pipeline components and pipelines, Vibration and shock with respect to human beings, Domestic, commercial and industrial heating appliances, Fuels, Electronic tubes, Organic chemicals, Particle size analysis. Sieving, Graphical symbols, Environmental protection, Wastes, Aircraft and space vehicles in general, Wind turbine systems and other alternative sources of energy, Gears, Installations in buildings, Components and accessories for telecommunications equipment, Road vehicle systems, Mechanical structures for electronic equipment, Thermodynamics and temperature measurements, Internal combustion engines, Diagnostic, maintenance and test equipment, Glass, Electromechanical components for electronic and telecommunications equipment, Protective equipment, Electrical wires and cables, Semiconductor devices, Piezoelectric and dielectric devices, Rubber and plastics products, On-board equipment and instruments.

AENOR, What instrument is used for gas measurement

UNE 82501:2004 Measuring instruments. Instruments intended to measure the emissions of exhaust pollutant gaz of motor vehicles. Characteristics and test methods.
UNE 21302-300:2004 Electrotechnical Vocabulary - Electrical and electronic measurements and measuring instruments - Part 311: General terms relating to measurements - Part 312: General terms relating to electrical measurements - Part 313: Types of electrical measuring instr
UNE-EN 15758:2011 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects
UNE-EN ISO 15616-3:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003)
UNE-EN 61676:2003/A1:2009 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
UNE-EN 61676:2003 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
UNE-EN 14412:2005 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
UNE 40162-3:1975 CORRECTION OF ATMOSPHERIC PRESSURE AND TEMPERATURE IN MEASUREMENTS MADE WITH "AIR-FLOW" APPARATUS TO DETEMINE AVERAGE DIAMETER OF WOOL FIBRES.
UNE-EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
UNE-EN 1076:2010 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
UNE-EN 13528-1:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements
UNE-EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance

Japanese Industrial Standards Committee (JISC), What instrument is used for gas measurement

JIS M 7602:1993 Interferometer type instrumental gas detector for inflammable gas
JIS K 0306:2004 Measuring method for volatile organic compounds in airborne by gas detector tube
JIS B 1757-2:2010 Evaluation of instruments for the measurement of individual gears -- Part 2: Tooth form measurement using sphere or cylinder artifacts

IN-BIS, What instrument is used for gas measurement

American National Standards Institute （ANSI), What instrument is used for gas measurement

ANSI/ASME MFC-4M-1986 Measurement of Gas Flow by Turbine Meters
ANSI/SAE J254-1993 Instrumentation and Techniques for Exhaust Gas Emissions Measurement
ANSI/AWS B2.1-1/8-227:2002 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/16 through 1-1/2 inch thick, ER309, As-Welded Condition, Primarily Pip
ANSI/ARESCA 61400-50-1:2023 Wind energy generation systems - Part 50-1: Wind measurement - Application of meteorological mast, nacelle and spinner mounted instruments
ANSI/ICEA T-26-465-2013 Guide For Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test
ANSI/NEMA ICEAT-27-581-2008 Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, What instrument is used for gas measurement

GB/T 5704.2-1985 Measuring instruments for anthropometry--Sliding caliper for anthropometry
GB/T 5704.3-1985 Measuring instruments for anthropometry--Spreading caliper for anthropometry
GB/T 5704.4-1985 Measuring instruments for anthropometry--Coordinate caliper for anthropometry
GB/T 4728.8-2000 Graphical symbols for diagrams--Part 8: Measuring instruments,lamps and signalling devices
GB/T 4728.8-2008 Graphical symbols for diagrams.Part 8:Measuring instruments,lamps and signaling devices
GB/T 4728.8-2022 Graphical symbols for electrical diagrams—Part 8：Measuring instruments, lamps and signalling devices
GB 20936.4-2008 Electrical apparatus for the detection and measurement of flammable gases.Part 4:Performance requirements for group Ⅱ apparatus indicating a volume fraction up to 100% gas
GB/T 13163.4-2014 Radiation protection instrumentation.Radon and radon decay product measuring instruments.Part 4: Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR)
GB 20936.2-2009 Electrical apparatus for the detection and measurement of flammable gases.Part 2:Performance requirements for group I apparatus indicating a volume fraction up to 5% methane in air
GB/T 20936.3-2009 Electrical apparatus for the detection and measurement of flammable gases.Part 3:Performance requirements for group I apparatus indicating a volume fraction up to 100% methane in air
GB/T 19629-2005 Medical Electrical equipment-Dosimeters with ionization chambers and/or semi-conductors as used in X-ray diagnostic imaging

German Institute for Standardization, What instrument is used for gas measurement

DIN EN 50270:2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen; German version EN 50270:2006
DIN EN 13625:2002-03 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage; German version EN 13625:2001
DIN 12702:1978 Laboratory glassware; volumetric glassware for gas analysis, gas burettes, azotometers, eudiometers, nitrometers
DIN EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen; German version EN 50270:2015
DIN 2271-2:1976 Pneumatic Length Measurement (Air Gauging); Design Features of Instruments Working in the High Pressure Range
DIN EN IEC 61207-2:2021-03 Expression of performance of gas analyzers - Part 2: Measuring oxygen in gas utilizing high-temperature electrochemical sensors (IEC 61207-2:2019); German version EN IEC 61207-2:2019 / Note: DIN EN 61207-2 (1995-02) remains valid alongside this standar...
DIN 43807:1983-10 Measuring and control; electrical measuring instruments; terminal markings for switchboard meters, panel meters and measuring transducers for the measurement of power and power factor
DIN 6855-1:1992 Quality control of nuclear medicine instruments; radiation counting systems for measurements in vivo and in vitro
DIN VDE 0405-4:2005 Determination of the breath alcohol concentration - Part 4: Testing of evidential breath analyzers by using calibration gas
DIN EN 50271:2011 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies; German version EN 50271:2010
DIN EN 15758:2010-12 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and of the surfaces of objects; German version EN 15758:2010
DIN EN 45544-3:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for general gas detection; German version EN 45544-3:2015
DIN EN 61674:2005 Medical electrical equipment - Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnostic imaging (IEC 61674:1997 + A1:2002); German version EN 61674:1997 + A1:2002
DIN 2271-3:2000 Verification of geometrical parameters - Pneumatic length measurement (air gauging) - Part 3: Characteristics of instruments working in the high-pressure range - requirements, testing
DIN EN 15758:2010 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and of the surfaces of objects; German version EN 15758:2010
DIN EN ISO 8041-1:2017-10 Human response to vibration - Measuring instrumentation - Part 1: General purpose vibration meters (ISO 8041-1:2017); German version EN ISO 8041-1:2017
DIN EN 45544-2:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for exposure measurement; German version EN 45544-2:2015
DIN 43802-2:1991-01 Line scales and pointers for indicating electrical measuring instruments; general requirements
DIN 43802-4:1991-01 Line scales and pointers for indicating electrical measuring instruments; scale graduation and numbering
DIN 43802-3:1991-01 Line scales and pointers for indicating electrical measuring instruments; designs and dimensions
DIN EN ISO 15616-3:2003-05 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003); German version EN ISO 15616-3:2003
DIN EN 61676:2010-05 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology (IEC 61676:2002+A1:2008); German version EN 61676:2002+A1:2009 / Note: To be replaced by DIN EN IEC 61676 (2022-05).
DIN EN 61676:2010 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology (IEC 61676:2002+A1:2008); German version EN 61676:2002+A1:2009
DIN EN 62467-1:2016-09 Medical electrical equipment - Dosimetric instruments as used in brachytherapy - Part 1: Instruments based on well-type ionization chambers (IEC 62467-1:2009); German version EN 62467-1:2015
DIN EN 12645:2015-02 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing; German version EN 12645:2014
DIN EN IEC 61676:2022-05 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology (IEC/CDV 61676:2021); German and English version prEN IEC 61676:2022 / Note: Date of issue 2022-03-25*Intended as repl...
DIN EN ISO 8041-1:2017 Human response to vibration - Measuring instrumentation - Part 1: General purpose vibration meters (ISO 8041-1:2017)
DIN EN ISO 15616-3:2003 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003); German version EN ISO 15616-3:2003
DIN EN ISO 23320:2022-08 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO 23320:2022); German version EN ISO 23320:2022
DIN EN ISO 22065:2021-02 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2020); German version EN ISO 22065:2020
DIN 51855-7:1986 Testing of gaseous fuels and other gases; determination of the content of sulfur compounds; gaschromatographic determination of the content of odoriferous sulfur compounds using an electrochemical detector
DIN EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage; German version EN 13625:2001
DIN 51900-1:2000 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 1: Principles, apparatus, methods
DIN EN 60749-40:2012-02 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (IEC 60749-40:2011); German version EN 60749-40:2011
DIN EN 14412:2004-12 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance; German version EN 14412:2004
DIN EN ISO 13506-1:2023-03 Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin (ISO/DIS 13506-1:2023); German and English version prEN ISO 13506-1:2023 / Note: Date of issue 2023...
DIN EN 61674:2015 Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging (IEC 61674:2012); German version EN 61674:2013
DIN EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15); German version EN ISO 4787:2011
DIN EN 50267-1:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus; German version EN 50267-1:1998
DIN EN 62467-1:2016 Medical electrical equipment - Dosimetric instruments as used in brachytherapy - Part 1: Instruments based on well-type ionization chambers (IEC 62467-1:2009); German version EN 62467-1:2015
DIN EN 13528-2:2002-12 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 2: Specific requirements and test methods; German version EN 13528-2:2002
DIN EN 60051-9/A1:1996 Direct acting indicating analogue electrical-measuring instruments and their accessories - Part 9: Recommended test methods (IEC 60051-9:1988/A1:1994); German version EN 60051-9:1989/A1:1995
DIN EN IEC 61207-2:2021 Expression of performance of gas analyzers - Part 2: Measuring oxygen in gas utilizing high-temperature electrochemical sensors (IEC 61207-2:2019); German version EN IEC 61207-2:2019
DIN EN ISO 13506-1:2017 Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin (ISO 13506-1:2017)
DIN EN ISO 13506-1:2017-12 Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin (ISO 13506-1:2017); German version EN ISO 13506-1:2017 / Note: To be replaced by DIN EN ISO 13506-1...
DIN EN 13528-3:2004-04 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Part 3: Guide to selection, use and maintenance; German version EN 13528-3:2003
DIN EN ISO 23320:2021 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO/DIS 23320:2021); German and English version prEN ISO 23320:2021
DIN EN ISO 13506-1:2023 Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin (ISO/DIS 13506-1:2023); German and English version prEN ISO 13506-1:2023
DIN EN ISO 22065:2021 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2020); German version EN ISO 22065:2020
DIN EN 13528-1:2002-12 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 1: General requirements; German version EN 13528-1:2002
DIN EN 60512-11-14:2004 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test (IEC 60512-11-14:2003); German version EN 60512-11-14:2003

Association Francaise de Normalisation, What instrument is used for gas measurement

NF EN 61577-2:2017 Instrumentation pour la radioprotection - Instruments de mesure du radon et des descendants du radon - Partie 2 : exigences spécifiques pour les instruments de mesure du 222Rn et du 220Rn
NF C23-570:2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen.
NF C23-570*NF EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
NF C23-558:1992 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent (V/V) gas.
NF EN 13625:2002 Essais non destructifs - Contrôle d'étanchéité - Guide pour la sélection des instruments utilisés pour le mesurage des fuites gazeuses
NF X10-122-1:2011 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas - Part 1 : meters for custody transfer and allocation measurement.
NF C23-541-2:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 2 : performance requirements for apparatus for the detection of combustible gases.
NF C46-251-2*NF EN IEC 61207-2:2019 Expression of performance of gas analyzers - Part 2 : measuring oxygen in gas utilizing high-temperature electrochemical sensors
NF EN IEC 61207-2:2019 Expression des qualités de fonctionnement des analyseurs de gaz - Partie 2 : mesure de l'oxygène contenu dans le gaz en utilisant des capteurs électrochimiques à haute température
NF B35-309:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use.
NF X10-122-1*NF ISO 17089-1:2020 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas - Part 1 : meters for custody transfer and allocation measurement
NF C23-557:1992 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent lower explosive limit.
NF X80-010*NF EN 15758:2010 Conservation of cultural property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects.
FD X15-111:2004 Mesure de l'humidité de l'air - Généralités sur les instruments de mesure - Guide de choix et d'utilisation
NF C42-130:1989 Direct acting recording electrical measuring instruments and their accessories.
NF EN 15758:2010 Conservation des biens culturels - Méthodes et instruments de mesure de la température de l'air et de la surface des objets
XP X43-321:2018 Qualité de l'air - Émissions de sources fixes - Détermination de la concentration massique d'ammoniac par des techniques instrumentales
XP X43-322:2018 Air quality - Stationary source emission - Determination of the mass concentration of formaldehyde by instrumental techniques
NF C42-106:1990 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 7 : special requirements for multi-function instruments.
NF B35-212-2*NF EN ISO 15212-2:2002 Oscillation-type density meters - Part 2 : process instruments for homogeneous liquids
NF E90-403-1*NF EN ISO 8041-1:2017 Human response to vibration - Measuring instrumentation - Part 1 : general purpose vibration meters
NF C74-204/A1:2006 Medical electrical equipment - Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnostic imaging
NF X11-622:1977 Determination of the area per unit mass of powders (specific surface) by means of gas adsorption. Various readings of the basic method.
NF C74-230*NF EN 61676:2006 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
NF C74-267-1*NF EN 62467-1:2015 Medical electrical equipment - Dosimetric instruments as used in brachytherapy - Part 1 : instruments based on well-type ionization chambers
NF EN 62467-1:2015 Appareils électromédicaux - Instruments de dosimétrie utilisés en curiethérapie - Partie 1 : instruments conçus pour les chambres d'ionisation à puits
NF EN ISO 15616-3:2003 Essais de réception des machines de soudage et de coupage de qualité par faisceau laser CO2 - Partie 3 : étalonnage des instruments de mesure de débit et de pression des gaz d'assistance
NF X43-286*NF EN ISO 22065:2020 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers
NF EN IEC 60051-9:2021 Appareils de mesure électriques indicateurs analogiques à action directe et leurs accessoires - Partie 9 : méthodes d'essai recommandées
NF C23-541-1/A1:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 1 : general requirements and test methods.
NF C23-541-1:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 1 : general requirements and test methods.
NF EN ISO 13506-1:2017 Vêtements de protection contre la chaleur et les flammes - Partie 1 : Méthode d'essai pour vêtements complets - Mesurage de l'énergie transférée à l'aide d'un mannequin instrumenté
NF X43-016:1977 Method for the determination of an acid gas pollution index(expressed as SO2 equivalent)using a continuous sampling automatic sequential analyser.
NF C42-107:1990 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 8 : special requirements for accessories.
NF EN 60749-40:2012 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 40 : méthode d'essai de chute au niveau de la carte avec utilisation d'une jauge de contrainte
NF EN 13528-2:2003 Qualité de l'air ambiant - Échantillonneurs par diffusion pour la détermination des concentrations des gaz et des vapeurs - Exigences et méthodes d'essai - Partie 2 : exigences spécifiques et méthodes d'essai
NF C42-103*NF EN 60051-4:1990 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 4 : special requirements for frequency meters.
NF EN ISO 18589-6:2021 Mesurage de la radioactivité dans l'environnement - Sol - Partie 6 : mesurage des activités alpha globale et bêta globale - Méthode d'essai utilisant un compteur proportionnel à circulation gazeuse
NF C42-108*NF EN 60051-9:1990 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 9 : recommended test methods.
NF S74-572-1*NF EN ISO 13506-1:2017 Protective clothing against heat and flame - Part 1 : Test method for complete garments - Measurement of transferred energy using an instrumented manikin
NF EN 13528-1:2003 Qualité de l'air - Echantillonneurs par diffusion pour la détermination des concentrations des gaz et des vapeurs - Prescriptions et méthodes d'essai - Partie 1: prescriptions générales
NF C23-595-2*NF EN 50379-2:2012 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 2 : performance requirements for apparatus used in statutory inspections and assessment
NF EN ISO 16641:2016 Mesurage de la radioactivité dans l'environnement - Air - Radon 220 : méthode de mesure intégrée pour la détermination de l'activité volumique moyenne avec des détecteurs passifs solides de traces nucléaires
NF C19-117-4*NF EN 61577-4:2015 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 4 : equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR)
NF EN 61577-4:2015 Instrumentation pour la radioprotection - Instruments de mesure du radon et des descendants du radon - Partie 4 : dispositif pour la réalisation d'atmosphères de référence contenant des isotopes du radon et leurs descendants (STAR)
NF EN 13528-3:2004 Qualité de l'air ambiant - Échantillonneurs par diffusion pour la détermination de la concentration des gaz et vapeurs - Exigences et méthodes d'essai - Partie 3 : guide pour la sélection, l'utilisation et la maintenance
NF C42-100-1*NF EN 60051-1:2017 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: definitions and general requirements common to all parts
NF C42-102*NF EN 60051-3:1990 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3 : special requirements for wattmeters and varmeters.
NF C42-101*NF EN 60051-2:1990 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2 : special requirements for ammeters and voltmeters.
NF X43-060-3*NF EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3 : guide to selection, use and maintenance.
NF C42-104:1990 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 5 : special requirements for phase meters, power factor meters and synchronoscopes.
NF C74-204:2002 Medical electrical equipment - Dosimeters with ionization chambers and/or semi-conductor detectors as used in x-ray diagnosis imaging
NF EN 50379-1:2012 Spécification pour les appareils électriques portatifs conçus pour mesurer les paramètres des gaz de combustion dans les conduits d'évacuation des appareils de chauffage - Partie 1 : prescriptions générales et méthodes d'essai

CZ-CSN, What instrument is used for gas measurement

CSN 25 7501-1966 Volumetric measuring apparatuses for liquids. Common regulations
CSN 35 6511-1986 Electronic measuring Instruments. Climatic requtrements. Condition of use
CSN 35 6250-1962 Cases of panel and switchboard electrical measuring pointer instrumenta. Classification
CSN ISO 2733:1995 Vitreous and porcelain enamels.Apparatus for testing with acid and neutral liquids and their vapours
CSN 39 5305-2006 Calibration of mechanic-electric (piezo) transducers for measurement of gunpowder gas pressure

PL-PKN, What instrument is used for gas measurement

PN E88000-1969 Switchboard electrical measuring instruments Main overall dimenjions
PN C04759 ArkusZ01-1973 Gaseous fuels Determination of components by volumetric method ?n Orsat-type apparatus
PN-EN ISO 22065-2021-05 E Workplace air -- Gases and vapours -- Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2020)

SE-SIS, What instrument is used for gas measurement

SIS SEN 21 08 56-1969 Electrical apparatus for explosive gas atmospheres Measuring instruments and accessories
SIS SS IEC 477:1982 Electrical measuring instruments - Laborator/ resistors
SIS SS-EN 50 058-1992 Electrical apparatus for the detection and measurement of combustible gases - Performance requirements for Group II apparatus indicating up to 100 % (v/v) gas
SIS SS-EN 50 055-1992 Electrical apparatusfor the detection and measurement ofcombustible gases - Performance requirements for Group I apparatus indicating upto5% (v/v) methane in air
SIS SS-EN 50 057-1992 Electrical apparatusfor the detection and measurement of combustible gases - Performance requirements for Group II apparatus indicating up to 100 % lower explosive limit
SIS SS-EN 50 056-1992 Electrical apparatus for the detection and measurement of combustible gases — Performance requireménts for Group I apparatus indicating up to 100 % (v/v) methane

KR-KS, What instrument is used for gas measurement

KS C IEC 61779-5-2003(2023)
KS C IEC 61779-3-2003(2023)
KS C IEC 61779-4-2003(2023)
KS C IEC 61779-2-2003(2023)
KS C IEC 61676-2017(2022) Medical electrical equipment — Dosimetric instruments used for noninvasive measurement of X-ray tube voltage in diagnostic radiology
KS B ISO 15616-3-2008(2023) Acceptance tests for CO2-laser beam machines for high quality welding and cutting－Part 3：Calibration of instruments for measurement of gas flow and pressure
KS B ISO 8041-1-2019 Human response to vibration — Measuring instrumentation — Part 1: General purpose vibration meters
KS R ISO PAS 3930-2014 Instruments for measuring vehicle exhaust emissions — Metrological and technical requirements; Metrological control and performance tests

British Standards Institution (BSI), What instrument is used for gas measurement

BS EN IEC 61207-2:2019 Expression of performance of gas analyzers - Measuring oxygen in gas utilizing high-temperature electrochemical sensors
BS ISO 17089-1:2010 Measurement of fluid flow in closed conduits. Ultrasonic meters for gas. Meters for custody transfer and allocation measurement
BS EN 50241-2:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Performance requirements for apparatus for the detection of combustible gases
17/30356584 DC BS EN 61577-2. Radiation protection instrumentation. Radon and radon dec ay product measuring instruments. Part 2. Specific requirements for <sup>222</sup>Rn and <sup>220</sup>Rn measuring instruments
BS EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
BS EN 15758:2010 Conservation of cultural property. Procedures and instruments for measuring temperatures of the air and the surfaces of objects
BS 6705:1987 Specification for electrical measuring instruments for use on intrinsically safe circuits in coal mines
BS 6020-2:1981 Instruments for the detection of combustible gases - Specification for safety and performance requirements for Group I instruments reading up to 5% methane in air
BS EN 45544-3:2015 Tracked Changes. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. Performance requirements for apparatus used for general gas detection
BS EN 62467-1:2015 Medical electrical equipment. Dosimetric instruments as used in brachytherapy. Instruments based on well-type ionization chambers
BS IEC 61435:2013 Nuclear instrumentation. High-purity germanium crystals for radiationdetectors. Measurement methods of basic characteristics
BS EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
BS EN 13625:2002(2007) Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
BS 3680-8D:1980 Measurement of liquid flow in open channels. Measuring instruments and equipment. Cableway system for stream gauging
BS 7967:2015 Guide for the use of electronic portable combustion gas analysers for the measurement of carbon monoxide in dwellings and the combustion performance of domestic gas-fired appliances
21/30429405 DC BS EN ISO 4787. Laboratory glass and plastic ware. Volumetric instruments. Methods for testing of capacity and for use
BS EN ISO 4787:2021 Tracked Changes. Laboratory glass and plastic ware. Volumetric instruments. Methods for testing of capacity and for use
BS EN ISO 15212-2:2002 Oscillation-type density meters — Part 2: Process instruments for homogenous liquids
BS EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
BS EN 61676:2003 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
BS EN 61676:2002 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
BS EN 61676+A1:2003 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
BS EN ISO 15616-3:2003 Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Calibration of instruments for measurement of gas flow and pressure
BS ISO 17089-1:2019 Tracked Changes. Measurement of fluid flow in closed conduits. Ultrasonic meters for gas. Meters for custody transfer and allocation measurement
BS EN ISO 22065:2020 Workplace air. Gases and vapours. Requirements for evaluation of measuring procedures using pumped samplers
BS EN IEC 61400-50-1:2022 Wind energy generation systems - Wind measurement. Application of meteorological mast, nacelle and spinner mounted instruments
BS EN 61676:2002+A1:2009 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
BS EN ISO 23320:2022 Workplace air. Gases and vapours. Requirements for evaluation of measuring procedures using diffusive samplers
BS EN 50241-1:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - General requirements and test methods
BS EN 61577-4:2014 Radiation protection instrumentation. Radon and radon decay product measuring instruments. Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR)
20/30429792 DC BS EN 61676. Medical electrical equipment. Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
BS EN 50379-2:2004 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Performance requirements for apparatus used in statutory inspections and assessment
BS EN 50379-2:2012 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances. Performance requirements for apparatus used in statutory inspections and assessment
BS EN 60512-11-14:2003 Connectors for electronic equipment - Tests and measurements - Climatic tests - Flowing single gas corrosion test
BS EN 50436-2:2014 Alcohol interlocks. Test methods and performance requirements. Instruments having a mouthpiece and measuring breath alcohol for general preventive use
BS EN 50436-2:2007 Alcohol interlocks — Test methods and performance requirements — Part 2: Instruments having a mouthpiece and measuring breath alcohol for general preventive use
BS EN 60749-39:2006 Semiconductor devices - Mechanical and climatic test methods - Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
21/30410828 DC BS ENISO 23320. Workplace air. Gases and vapours. Requirements for evaluation of measuring procedures using diffusive samplers
BS EN 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Flowing mixed gas corrosion test
BS 6069 Sec.3.3:1991 Characterization of air quality. Workplace atmospheres. Method for the determination of vaporous chlorinated hydrocarbons by charcoal tube/solvent desorption/gas chromatography
20/30411148 DC BS EN IEC 62990-3. Workplace atmospheres. Part 3. Gas detectors. Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
19/30383611 DC BS EN IEC 62990-3. Workplace atmospheres. Part 3. Gas detectors. Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
19/30396990 DC BS EN IEC 62990-3. Workplace atmospheres. Part 3. Gas detectors. Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
BS EN 60051-1:1999 Direct acting indicating analogue electrical measuring instruments and their accessories - Definitions and general requirements common to all parts
23/30431371 DC BS EN ISO 13506-1. Protective clothing against heat and flame - Part 1. Test method for complete garments. Measurement of transferred energy using an instrumented manikin
BS EN 60444-5:1995 Measurement of quartz crystal unit parameters - Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction
BS EN IEC 60051-6:2018 Direct acting indicating analogue electrical measuring instruments and their accessories - Special requirements for ohmmeters (impedance meters) and conductance meters
BS EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
BS 6069 Sec.3.4:1991 Characterization of air quality. Workplace atmospheres. Method for the determination of vaporous aromatic hydrocarbons by charcoal tube/solvent desorption/gas chromatography
PD IEC/TS 60318-7:2017 Tracked Changes. Electroacoustics. Simulators of human head and ear. Head and torso simulator for the measurement of air-conduction hearing aids

Group Standards of the People's Republic of China, What instrument is used for gas measurement

T/CEC 542.1-2021 General Specifications for Gas Test Instruments for Electric Power Part 1: Gas Humidity Test Instruments
T/CEC 542.2-2022 General technical requirements for gas testing instruments for electric power Part 2: Gas chromatography for sulfur hexafluoride gas purity testers
T/CAS ES380926001-2022 Rules for quality grading and evaluating of industrial products—Online analyzers – Online combustible and toxic gas detector
T/CMA HG101-2023 calibration method for gas detectors and alarms of nitric oxide, nitrogen dioxide (measuring range 0 μmol/mol～500 μmol/mol) for mining

ZA-SANS, What instrument is used for gas measurement

SANS 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
SANS 1515-1:2006 Gas measuring equipment primarily for use in mines Part 1: Battery-operated portable, flammable gas measuring instruments and warning devices
SANS 1515-2:2006 Gas measuring equipment primarily for use in mines Part 2: Fixed, transportable, and vehicle-mounted flammable gas measuring and warning sensor heads and instruments

American Gas Association, What instrument is used for gas measurement

AGA REPORT 9-2007 Measurement of Gas by Multipath Ultrasonic Meters (Second Edition; XQ0701; Also Known as API MPMS 14.9)

Military Standard of the People's Republic of China-General Armament Department, What instrument is used for gas measurement

GJB 6551-2008 The general specification for military surface pressure measuring instruments
GJB 6552-2008 The general specification for military surface humidity measuring instruments
GJB 8775-2015 General specification for ground air temperature measuring instruments for military use
GJB 6556.2-2008 Approval test methods of military meteoroogical equipment.Part 2:Measuring sensors and instruments for surface observation

CENELEC - European Committee for Electrotechnical Standardization, What instrument is used for gas measurement

EN 50073:1999 Guide for Selection@ Installation@ Use and Maintenance of Apparatus for the Detection and Measurement of Combustible Gases or Oxygen
EN 50241-1:1999 Specification for Open Path Apparatus for the Detection of Combustible or Toxic Gases and Vapours@ Part 1: General Requirements and Test Methods

Professional Standard - Aviation, What instrument is used for gas measurement

HB 6813.10-1993 Nozzle body for measuring tools of pneumatic measuring instruments (L=58~78)
HB 6813.11-1993 Nozzle body for measuring tools of pneumatic measuring instruments (L=58~78)

RU-GOST R, What instrument is used for gas measurement

GOST R 8.899-2015 State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Verification of measurement procedure
GOST 8.563.2-1997 State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by differential pressure method. Measurement procedure by orifice instruments
GOST 4.189-1985 System of product-quality indices. Electrical measuring resording instruments. Nomenclature of indices
GOST R 8.766-2011 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring mass concentration dissolving in water gasses (oxygen, hydrogen)
GOST R 8.641-2008 State sysem for ensuring the iniformity of measurements. State verification scheme for measuring instruments of the water solutions ion content by electrochemical methods (pX measuring instruments)
GOST R 8.912-2016 State system for ensuring the uniformity of measurements. Measuring instruments for anesthetic gases. Verification procedure
GOST 8.652-2016 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring mass concentration of dissolving in water gasses (oxygen, hydrogen)
GOST 4.196-1985 System of product-quality indices. Analogue panel electrical measuring instruments. Nomenclature of indices
GOST 4.194-1985 System of product-quality indices. Analogue pertable laboratory electrical measuring instruments. Nomenclature of indices
GOST IEC 60050-300-2015 International electrotechnical vocabulary. Electrical and electronic measurements and measuring instruments. Part 311. General terms relating to measurements. Part 312. General terms relating to electrical measurements. Part 313. Types of electrical measu
GOST R 8.756-2011 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments the ultrasound velocity in solids
GOST R 8.654-2009 State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles
GOST 8.578-2014 State system for ensuring the traceability of measurements. State hierarchy scheme for measuring instruments of the content of components in gaseous mediums
GOST 8.608-2012 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of chromatic dispersion in optical fiber
GOST 24802-1981 Level meters for liquid and solids. Terms and definitions
GOST 8711-1993 Direct acting indicating analogue electrical measuring inctruments and their accessories. Part 2. Special requirements for ammeters and voltmeters
GOST 8711-1978 Ammeters and voltmeters. General technical specifications
GOST 21107.12-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for spark discharges
GOST 33513-2015 Solid recovered fuel. Determination of carbon (C), hydrogen (H) and nitrogen (N) content by instrumental method
GOST 8.527-2013 State system for ensuring the uniformity of measurements. Measuring instruments of artificial radioactive aerosols volumetric activity. Verification procedure
GOST 8.527-1985 State system for ensuring the uniformity of measurements. Measuring instruments of artifical radioactive aerosols volumetric activity. Verification procedure
GOST 17750-1972 Jet fuel. Method for the determination luminometric number on the PLCHT instrument
GOST 21107.11-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for glow-discharge indicators
GOST R IEC 62467-1-2013 Medical electrical equipment. Dosimetric instruments as used in brachytherapy. Part 1. Instruments based on well-type ionization chambers
GOST R 8.922-2016 State system for ensuring the traceability of measurements. Gas analyzers and gas alarm devices for determination of combustible gases and vapors in working zone air. Testing method
GOST 8.618-2013 State system for ensuring the traceability of measurements. Gas analyzers and gas alarm devices for determination of combustible gases and vapors in working zone air. Verification procedure
GOST 8.607-2012 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of polarization mode dispersion in optical fiber
GOST R 8.735.0-2011 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the content of components in liquid and solid media. Basic principles
GOST 21107.13-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for pulsed thyratrons and gas-filled rectifiers
GOST 8.606-2012 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of aerosols, suspensions and powdery materials
GOST 19824-1974 Filter air purification means for collective protection objects. Method of measuring the constant air flow resistance
GOST IEC 61676-2011 Medical electrical equipment. Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
GOST 23706-1993 Direct acting indicating electrical measuring instruments and their accessories. Part 6. Special requirements for ohmmeters (impedance meters) and conductance meters
GOST 23706-1979 Ohmmeters. General specifications
GOST 21107.10-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for glow-discharge thyratrons and gas-filled rectifiers
GOST R 8.649-2008 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of the content of components in solid and liquid mediums in spectral range from 0,19 to 1,0 mu
GOST 18229-1981 Spektrometric charge-sensitive preamplifiers for semiconductor radiation detectors. Types, basic parameters and methods of measurements
GOST R 8.816-2013 State system for ensuring the uniformity of measurements. Natural gas. Volumetric heat (energy) of combustion. Method for measurement using the bomb calorimeter
GOST R ISO 11614-2011 Reciprocating internal combustion compression-ignition engines. Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
GOST R 8.845-2013 State system for ensuring the uniformity of measurements. Air ion composition measurements. Method of measuring volume density of electric charge of air and air ion concentration using aspiration capacitor
GOST R 8.917-2016 State system for ensuring the uniformity of measurements. Instruments for measuring the smoke of exhaust gases from the motor vehicles equipped with compression-ignition engines. Verification method
GOST 8.617-2013 State system for ensuring the traceability of measurements. Nondispersive infrared (NDIR) gas analyzers for determination of carbon monoxide in the vapour phase of cigarette smoke. The method of verification
GOST 8.629-2013 State system for ensuring the traceability of measurements. Stationary and mobile verification means for combustible gases and vapors gas analyzers and gas alarm devices. General technical requirements
GOST R 8.735.2-2013 State system for ensuring the uniformity of measurements. State hierarchy scheme for measuring instruments of the content of organic components in liquid and solid mediums and materials. Transfer of the units from the state primary standard based on liqui
GOST 30012.9-1993 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 9. Methods of tests
GOST R 8.791-2013 State system for ensuring the uniformity of measurements. Radioisotope and piezobalance analyzers for mass concentration of aerosol particles in air of the working zone. The method of verification
GOST R 8.735.1-2011 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the content of components in liquid and solid substances and materials. Transfer of the units from the State Primary Standard based on coulomet
GOST R 53655.2-2009 Plastics film and sheeting. Determination of impact resistance by the free-falling weight method. Part 2. Instrumented puncture test
GOST 8.284-1978 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means of measuring of relative dielectric constant of liquids, solid and gases at frequencies 1 - 10 GHz
GOST 8.269-1977 State system for ensuring the uniformity of measurements. Measuring glass burettes for chemical non-automatic gas analyzers. Methods and means of verification

Korean Agency for Technology and Standards (KATS), What instrument is used for gas measurement

KS C IEC 61577-3-2014(2019) Radiation protection instrumentation — Radon and radon decay product measuring instruments — Part 3: Specific requirements for radon decay product measuring instruments
KS L ISO 4787:2006 Laboratory glassware-Volumetric glassware-Methods for use and testing of capacity
KS L ISO 4787:2016 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity
KS C IEC 61674:2007 Medical electrical equipment－Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnostic imaging
KS B ISO 15616-3-2008(2018) Acceptance tests for CO2-laser beam machines for high quality welding and cutting－Part 3：Calibration of instruments for measurement of gas flow and pressure
KS B ISO 15212-2:2006 Oscillation-type density meters－Part 2：Process instruments for homogeneous liquids
KS B ISO 8041-1:2019 Human response to vibration — Measuring instrumentation — Part 1: General purpose vibration meters
KS R ISO PAS 3930:2014 Instruments for measuring vehicle exhaust emissions — Metrological and technical requirements; Metrological control and performance tests
KS C IEC 61676:2012 Medical electrical equipment-Dosimetric instruments used for noninvasive measurement of X-ray tube voltage in diagnostic radiology
KS C IEC 62056-61-2003(2018)
KS M 3308-2016(2021) Test method for residual vinyl chloride monomer content of poly vinyl chloride by gas chromatography/mass spectrometer
KS B ISO 15616-3:2008 Acceptance tests for CO2-laser beam machines for high quality welding and cutting－Part 3：Calibration of instruments for measurement of gas flow and pressure
KS I 30011-2012 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
KS C IEC 60749-39:2006 Semiconductor devices－Mechanical and climatic test methods－Part 39：Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components

Indonesia Standards, What instrument is used for gas measurement

SNI 04-6265.1-2000 Nuclear instrumentation - Electrical measuring systems and instruments utilizing radiation sources - General aspects
SNI IEC 62467-1:2012

European Committee for Standardization (CEN), What instrument is used for gas measurement

EN 13625:2001 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
EN 15758:2010 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects
EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021)
EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15)
EN 13182:2002 Ventilation for buildings - Instrumentation requirements for air velocity measurements in ventilated spaces
EN ISO 15212-2:2002 Oscillation-type density meters - Part 2: Process instruments for homogenous liquids (ISO 15212-2:2002)
EN ISO 15212-2:2002/AC:2009 Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids (ISO 15212-2:2002/Cor 1:2008)
EN ISO 23320:2022 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO 23320:2022)
EN ISO 15616-3:2003 Acceptance tests for CO2- laser beam machines for high quality welding and cutting Part 3: Calibration of instruments for measurement of gas flow and pressure ISO 15616-3:2003
EN ISO 22065:2020 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2020)
prEN ISO 13506-1 Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin (ISO/DIS 13506‑1:2023)
prEN ISO 23320:2021 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO/DIS 23320:2021)

Danish Standards Foundation, What instrument is used for gas measurement

DS/EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
DS/ISO/TR 16153:2005 Piston-operated volumetric instruments - Determination of uncertainty for volume measurements made using the photometric method
DS/EN ISO 15616-3:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure
DS/EN 15758:2011 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects
DS/EN 61676/A1:2009 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
DS/ISO 22065:2020 Workplace air – Gases and vapours – Requirements for evaluation of measuring procedures using pumped samplers
DS/EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
DS/EN 50267-1:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of material from cables - Part 1: Apparatus
DS/EN ISO 22065:2020 Workplace air – Gases and vapours – Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2020)
DS/EN 1076:2010 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
DS/EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
DS/EN 13528-1:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements
DS/EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance

Lithuanian Standards Office , What instrument is used for gas measurement

LST EN 13625-2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
LST EN 15758-2010 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects
LST EN ISO 15616-3:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003)
LST EN 61676-2004 Medical electrical equipment. Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology (IEC 61676:2002)
LST EN 61676-2004/A1-2009 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology (IEC 61676:2002/A1:2008)
LST EN 50436-2-2014 Alcohol interlocks - Test methods and performance requirements -- Part 2: Instruments having a mouthpiece and measuring breath alcohol for general preventive use
LST EN 14412-2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
LST EN ISO 22065:2021 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2020)
LST EN 1076-2010 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
LST EN 838-2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
LST EN 13528-1-2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements
LST EN 13528-3-2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance

ES-UNE, What instrument is used for gas measurement

UNE-EN IEC 61207-2:2019 Expression of performance of gas analyzers - Part 2: Measuring oxygen in gas utilizing high-temperature electrochemical sensors (Endorsed by Asociación Española de Normalización in October of 2019.)
UNE-EN ISO 8041-1:2018 Human response to vibration - Measuring instrumentation - Part 1: General purpose vibration meters (ISO 8041-1:2017)
UNE-EN IEC 60051-7:2018 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 7: Special requirements for multi-function instruments (Endorsed by Asociación Española de Normalización in May of 2018.)
UNE-EN 61676:2003 ERRATUM Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology.
UNE-EN IEC 61676:2023 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology (Endorsed by Asociación Española de Normalización in June of 2023.)
UNE-EN 62467-1:2015 Medical electrical equipment - Dosimetric instruments as used in brachytherapy - Part 1: Instruments based on well-type ionization chambers (Endorsed by AENOR in January of 2016.)
UNE-EN ISO 22065:2021 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2020)
UNE-EN ISO 23320:2023 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO 23320:2022)
UNE-EN IEC 60051-9:2021 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 9: Recommended test methods (Endorsed by Asociación Española de Normalización in June of 2021.)
UNE-EN IEC 61400-50-1:2023 Wind energy generation systems - Part 50-1: Wind Measurement - Application of Meteorological Mast, Nacelle and Spinner Mounted Instruments
UNE-EN 60749-40:2011 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (Endorsed by AENOR in November of 2011.)
UNE-EN ISO 13506-1:2017 Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin (ISO 13506-1:2017) (Endorsed by Asociación Española de Normalización in November of 2017.)
UNE-EN IEC 60051-8:2018 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 8: Special requirements for accessories (Endorsed by Asociación Española de Normalización in May of 2018.)
UNE-EN IEC 60051-5:2018 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 5: Special requirements for phase meters, power factor meters and synchroscopes (Endorsed by Asociación Española de Normalización in May of 2018.)
UNE-EN 61577-4:2014 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 4: Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR) (Endorsed by AENOR in January of 2015.)
UNE-EN IEC 60051-4:2021 Direct acting indicating analogue electrical measuring instruments and their accessories title - Part 4: Special requirements for frequency meters (Endorsed by Asociación Española de Normalización in June of 2021.)
UNE-EN 60051-1:2017 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts (Endorsed by Asociación Española de Normalización in June of 2017.)
UNE-EN IEC 60051-2:2021 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters (Endorsed by Asociación Española de Normalización in June of 2021.)

American Society for Testing and Materials (ASTM), What instrument is used for gas measurement

ASTM E147-61(1996) Standard Specification for Apparatus For Microdetermination Of Nitrogen By Kjeldahl Method
ASTM E147-61(2001) Standard Specification for Apparatus For Microdetermination Of Nitrogen By Kjeldahl Method
ASTM E147-61(2006) Standard Specification for Apparatus For Microdetermination Of Nitrogen By Kjeldahl Method
ASTM E147-61(2011) Standard Specification for Apparatus for Microdetermination of Nitrogen by Kjeldahl Method
ASTM D3284-99 Standard Test Method for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters
ASTM E1603/E1603M-11(2017) Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
ASTM E1603-99 Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
ASTM E1603-99(2006) Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
ASTM E1603/E1603M-11 Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
ASTM D7166-05 Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels
ASTM D4490-96(2006)e1 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
ASTM D5454-93(1999) Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM D5454-04 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM D5454-11(2020) Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM E1603/E1603M-11(2022) Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
ASTM F3493-23 Standard Practice for Measuring Dynamic Characteristics of Water Slide Systems Using Instrumented Humans
ASTM D6399-10 Standard Guide for Selecting Instruments and Methods for Measuring Air Quality In Aircraft Cabins
ASTM E498-95(2006) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
ASTM D5454-11 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM D5454-11e1 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM D8406-22 Standard Practice for Performance Evaluation of Ambient Outdoor Air Quality Sensors and Sensor-based Instruments for Portable and Fixed-point Measurement
ASTM E2323-04 Standard Test Method for Calculating the Concentration of Fill Gas in a Sealed Insulating Glass Unit Using Measurements From an Oxygen Analyzer
ASTM F1930-00 Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Flash Fire Simulations Using an Instrumented Manikin
ASTM F1375-92(1999) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM F1375-92(2020) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components

International Electrotechnical Commission (IEC), What instrument is used for gas measurement

IEC 61207-2:2019 Expression of performance of gas analyzers - Part 2: Measuring oxygen in gas utilizing high-temperature electrochemical sensors
IEC 60181:1964 Index of electrical measuring apparatus used in connection with ionizing radiation
IEC 61435:2013 Nuclear instrumentation - High-purity germanium crystals for radiation detectors - Measurement methods of basic characteristics
IEC 61674:2012 Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging
IEC 62302:2007 Radiation protection instrumentation - Equipment for sampling and monitoring radioactive noble gases
IEC 61676:2023 RLV Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
IEC 61676:2023 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
IEC 61674:1997 Medical electrical equipment - Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnostic imaging
IEC 60181/AMD1:1967 Index of electrical measuring apparatus used in connection with ionizing radiation
IEC 60617 database Graphical symbols for diagrams--Part 8:Measuring instruments,lamps and signaling devices
IEC 61676:2002 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
IEC 61674/AMD1:2002 Medical electrical equipment - Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnostic imaging; Amendment 1
IEC 61676:2009 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
IEC 61676:2002/AMD1:2008 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of x-ray tube voltage in diagnostic radiology; Amendment 1
IEC 60051-9:2019 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 9: Recommended test methods
IEC 62467-1:2009 Medical electrical equipment - Dosimetric instruments as used in brachytherapy - Part 1: Instruments based on well-type ionization chambers
IEC 61400-50-1:2022 Wind energy generation systems - Part 50-1: Wind measurement - Application of meteorological mast, nacelle and spinner mounted instruments
IEC 60051-8:2017 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 8: Special requirements for accessories
IEC 60749-39:2006 Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
IEC 60512-11-14:2003 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests; Test 11p: Flowing single gas corrosion test

Professional Standard - Coal, What instrument is used for gas measurement

MT 563-1996 General technical specifications for portable gas measuring instruments used in coal mines

国家市场监督管理总局、中国国家标准化管理委员会, What instrument is used for gas measurement

GB/T 40291-2021 Nuclear instrumentation High—purity germanium crystals for radiation detectors—Measurement methods of basic characteristics

International Organization for Standardization (ISO), What instrument is used for gas measurement

ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
ISO 17089-1:2019 Measurement of fluid flow in closed conduits — Ultrasonic meters for gas — Part 1: Meters for custody transfer and allocation measurement
ISO 6145-5:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
ISO 15212-2:2002 Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids
ISO 17089-1:2010 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas - Part 1: Meters for custody transfer and allocation measurement
ISO 22065:2020 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers
ISO 15212-2:2002/cor 1:2008 Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids; Technical Corrigendum 1
ISO 23320:2022 Workplace air — Gases and vapours — Requirements for evaluation of measuring procedures using diffusive samplers
ISO 15616-3:2003 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure
ISO 22065:2019 Workplace air — Gases and vapours — Requirements for evaluation of measuring procedures using pumped samplers
ISO/DIS 13506-1 Protective clothing against heat and flame — Part 1: Test method for complete garments — Measurement of transferred energy using an instrumented manikin

AT-ON, What instrument is used for gas measurement

ONORM M 7535-5-1997 Testing of waste gases of furnace Systems - Measuring equipment for the determination of the combustion temperature of gases - Requirements, testing, marking of conformity
OENORM EN ISO 23320:2021 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO/DIS 23320:2021)

Standard Association of Australia （SAA）, What instrument is used for gas measurement

AS 3778.6.6:2008
AS 2162.1:1996 Verification and use of volumetric apparatus - General - Volumetric glassware
AS/NZS 4013:2014
AS/NZS 61779.1:2000 Electrical apparatus for the detection and measurement of flammable gases Part 1: General requirements and test methods

BE-NBN, What instrument is used for gas measurement

NBN-EN 50057-1993 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100 % lower explosive limit
NBN-EN 50055-1993 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 5 % (v/v) methane in air
NBN-EN 50056-1993 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 100 % (v/v) methane in air
NBN-EN 50054-1993 Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods
NBN C 73-802-1982
NBN C 73-802-1986
NBN E 17-202-1986
NBN H 03-101-1987 Light gauge metal containers - Aerosol cans - Definitions and determination methods for dimensions and capacities

Association of German Mechanical Engineers, What instrument is used for gas measurement

VDI 3490 Blatt 17-1998 Measurement of gases - Calibration gas mixtures - Dynamic preparation with thermal mass flow controllers
VDI 3490 Blatt 14-1994 Measurement of gases - Calibration gas mixtures - Preparation of calibration gas mixtures by volumetric static method using glass vessels
VDI 3860 Blatt 3-2011 Measurement of landfill gas - Measurement of surface emissions using the flame ionisation detector (FID)
VDI 3481 Blatt 4-2007 Gaseous emission measurement - Measurement of the concentrations of total organic carbon and methane carbon using the flame ionisation detector (FID)

NL-NEN, What instrument is used for gas measurement

NVN 5639-1992 Radioactivity measurements. Determination of the momentary exposure rate by portable radiation measurement instruments equipped with a gas ionization detector, in particular for nuclear accident control

未注明发布机构, What instrument is used for gas measurement

BS EN ISO 15616-3:2003(2009) Acceptance tests for CO2 - laser beam machines for high quality welding and cutting — Part 3 : Calibration ofinstruments for measurement ofgas flow and pressure

AT-OVE/ON, What instrument is used for gas measurement

OVE EN IEC 61207-2:2021 Expression of performance of gas analyzers - Part 2: Measuring oxygen in gas utilizing high-temperature electrochemical sensors (( IEC 61207-2:2019) EN IEC 61207-2:2019) (german version)

NZ-SNZ, What instrument is used for gas measurement

AS/NZS 4492.3:2000 Wool - Fleece Testing and Measurement Method 3: Measurement of Mean Fibre Diameter Using Airflow and Sonic A Instruments
AS/NZS 4886:2007 Domestic solid fuel burning appliance- Pellet heaters-Determination of flue gas emission

European Committee for Electrotechnical Standardization（CENELEC）, What instrument is used for gas measurement

EN IEC 61676:2023 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
EN 62467-1:2015 Medical electrical equipment - Dosimetric instruments as used in brachytherapy - Part 1: Instruments based on well-type ionization chambers
EN 61676:2002 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology (Incorporates Amendment A1: 2009)
EN 60444-5:1997 Measurement of Quartz Crystal Unit Parameters Part 5: Methods for the Determination of Equivalent Electrical Parameters Using Automatic Network Analyzer Techniques and Error Correction
EN IEC 61400-50-1:2022 Wind energy generation systems - Part 50-1: Wind measurement - Application of meteorological mast, nacelle and spinner mounted instruments
EN 61577-4:2014 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 4: Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR)

BELST, What instrument is used for gas measurement

STB 8022-2004 System for ensuring the uniformity of measurements of the Republic of Belarus. Sate verification scheme for measuring instrumentation of components in gas mixtures

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., What instrument is used for gas measurement

ASHRAE OR-05-8-6-2005 Feasibility Study of Using Various Instruments for Measurement of Air Motion in a Test Room
ASHRAE LV-11-C043-2011 Experimental Apparatus for Measuring the Performance of a Precooled Mixed Gas Joule Thomson Cryoprobe

Society of Automotive Engineers (SAE), What instrument is used for gas measurement

SAE J1094A-1978 CONSTANT VOLUME SAMPLER SYSTEM FOR EXHAUST EMISSIONS MEASUREMENT

IT-UNI, What instrument is used for gas measurement

UNI 2325-1943
UNI EN ISO 22065:2021 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers

WRC - Welding Research Council, What instrument is used for gas measurement

BULLETIN 318-1986 FACTORS INFLUENCING THE MEASUREMENT OF FERRITE CONTENT IN AUSTENITIC STAINLESS STEEL WELD METAL USING MAGNETIC INSTRUMENTS ; MEASUREMENTS OF FERRITE CONTENT IN AUSTENITIC STAINLESS STEEL WELD METAL GI

Institute of Electrical and Electronics Engineers (IEEE), What instrument is used for gas measurement

IEEE/ANSI N42.50-2022 American National Standard Performance Specifications for Instrumentation Systems Designed for Measuring Radon Progeny in Air
ANSI N42.50-2022 American National Standard Performance Specifications for Instrumentation Systems Designed for Measuring Radon Progeny in Air

NO-SN, What instrument is used for gas measurement

NS 4860-1983 Air quality - Determination of total solid aerosols in work-place air with personal sampler

GOSTR, What instrument is used for gas measurement

GOST 28725-1990 Instruments for measuring the level of liquids and loose materials. General technical requirements and test methods
GOST R 8.968-2019 State system for ensuring the uniformity of measurements. Alarm only apparatus for determination of combustible gases and vapors. Verification procedure
GOST ISO 16900-4-2020 Occupational safety standards system. Respiratory protective devices. Methods of test and test equipment. Part 4. Determination of gas capacity, internal migration/desorption of gas and combined filters using constant air flow and breakthrough time of fil

Professional Standard - Medicine, What instrument is used for gas measurement

YY/T 0722-2009 Medical electrical equipment.Dosimetric instrument used for non-invasive measurement of X-ray tube voltage in diagostic radiology
YY/T 0722-2016/tec 61676-2009 Medical electrical equipment Dosimetry instruments for non-intrusive measurement of X-ray tube voltage in diagnostic radiology
YY/T 0722-2016/tec 61676:2009

国家食品药品监督管理局, What instrument is used for gas measurement

YY/T 0722-2016 Medical electrical equipment Dosimetric instruments for non-accessible measurement of X-ray tube voltage in diagnostic radiology

Professional Standard - Nuclear Industry, What instrument is used for gas measurement

EJ/T 20053.3-2014 Specifications for dedicated sensor in uranium enrichment operation using gas centrifugal technology.Part 3: sensor for measuring light impurities

CH-SNV, What instrument is used for gas measurement

SN EN ISO 22065:2021 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2020)

U.S. Military Regulations and Norms, What instrument is used for gas measurement

ARMY A-A-52567 B-2006 SURVEY INSTRUMENT, AUTOMATED, INTEGRATED (AISI) [Replaced: ARMY MIL-S-0053085 A CANC NOTICE 1, ARMY MIL-S-53085, ARMY MIL-S-0053085 A (1), ARMY MIL-S-0053085 A]

Canadian Standards Association (CSA), What instrument is used for gas measurement

CSA CEI-C22.2NO61010-2-042CAN-1998 Regles De Securite Pour Appareils Electriques De Mesurage, De Regulation Et De Laboratoire Partie 2-042: Prescriptions Particulieres Pour Autoclaves Et Sterilisateurs Utilisant Des Gaz Toxiques Pour Le Traitement Des Materiels A Usage Medical Et Durant L

IEC - International Electrotechnical Commission, What instrument is used for gas measurement

TS 60318-7-2017 Electroacoustics – Simulators of human head and ear – Part 7: Head and torso simulator for the measurement of air-conduction hearing aids (Edition 2.0)

ES-AENOR, What instrument is used for gas measurement

UNE-EN 60051-1:1993