ZH
KR
JP
ES
RU
DE

The use characteristics of the viscometer

The use characteristics of the viscometer, Total:500 items.

In the international standard classification, The use characteristics of the viscometer involves: Products of the chemical industry, Construction materials, Paints and varnishes, Inks. Printing inks, Rubber, Measurement of volume, mass, density, viscosity, Glass, Adhesives, Road engineering, Waxes, bituminous materials and other petroleum products, Plastics, Soil quality. Pedology, Structure and structure elements, Plant and equipment for the food industry, Raw materials for rubber and plastics, Lubricants, industrial oils and related products, Ceramics, Ergonomics, Hydraulic fluids, Surface treatment and coating, Materials for aerospace construction, Analytical chemistry, Components for electrical equipment, Protection of and in buildings, Natural gas, Cereals, pulses and derived products, Magnetic materials, Electricity. Magnetism. Electrical and magnetic measurements, Radiocommunications, Hand-held tools, Metrology and measurement in general, Fuels, Earthworks. Excavations. Foundation construction. Underground works, Characteristics and design of machines, apparatus, equipment, Insulation, Environmental protection, Petroleum products in general, Mechanical testing.


GSO, The use characteristics of the viscometer

  • GSO ISO 6388:2013 Surface active agents - Determination of flow properties using a rotational viscometer
  • OS GSO ISO 6388:2013 Surface active agents - Determination of flow properties using a rotational viscometer
  • GSO ISO 12644:2007 Graphic Technology – Determination of Rheological Properties Of Paste Inks and Vehicles by the Falling Rod Viscometer
  • GSO ISO 7884-2:2010 Glass -- Viscosity and viscometric fixed points -- Part 2: Determination of viscosity by rotation viscometers
  • OS GSO ISO 289-2:2008 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 2: Determination of pre-vulcanization characteristics
  • GSO ISO 12634:2015 Graphic technology -- Determination of tack of paste inks and vehicles by a rotary tackmeter
  • GSO ISO 2884-1:2015 Paints and varnishes -- Determination of viscosity using rotary viscometers -- Part 1: Cone-and-plate viscometer operated at a high rate of shear
  • GSO ISO 289-1:2015 Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 1: Determination of Mooney viscosity
  • OS GSO ISO 289-1:2015 Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 1: Determination of Mooney viscosity
  • BH GSO ISO 289-1:2016 Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 1: Determination of Mooney viscosity
  • BH GSO ISO 7759:2016 Anodizing of aluminium and its alloys -- Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
  • GSO ISO 7759:2015 Anodizing of aluminium and its alloys -- Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
  • BH GSO ISO 3219:2016 Plastics -- Polymers/resins in the liquid state or as emulsions or dispersions -- Determination of viscosity using a rotational viscometer with defined shear rate
  • OS GSO ISO 3219:2015 Plastics -- Polymers/resins in the liquid state or as emulsions or dispersions -- Determination of viscosity using a rotational viscometer with defined shear rate
  • GSO ISO 5530-2:2015 Wheat flour -- Physical characteristics of doughs -- Part 2: Determination of rheological properties using an extensograph
  • GSO ISO 289-2:2008 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 2: Determination of pre-vulcanization characteristics
  • GSO ISO 3219:2015 Plastics -- Polymers/resins in the liquid state or as emulsions or dispersions -- Determination of viscosity using a rotational viscometer with defined shear rate
  • GSO ISO 16525-2:2016 Adhesives -- Test methods for isotropic electrically conductive adhesives -- Part 2: Determination of electrical characteristics for use in electronic assemblies
  • OS GSO ISO 16525-2:2016 Adhesives -- Test methods for isotropic electrically conductive adhesives -- Part 2: Determination of electrical characteristics for use in electronic assemblies
  • OS GSO ISO 16525-4:2016 Adhesives -- Test methods for isotropic electrically conductive adhesives -- Part 4: Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies
  • BH GSO ISO 16525-4:2017 Adhesives -- Test methods for isotropic electrically conductive adhesives -- Part 4: Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies
  • GSO ISO 16525-4:2016 Adhesives -- Test methods for isotropic electrically conductive adhesives -- Part 4: Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies
  • GSO OIML R 53:2008 Metrological characteristics of elastic Sensing elements used for measurement of Pressure-determination methods
  • GSO ISO 5530-3:2015 Wheat flour -- Physical characteristics of doughs -- Part 3: Determination of water absorption and rheological properties using a valorigraph
  • GSO ISO 1628-4:2023 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 4: Polycarbonate (PC) moulding and extrusion materials
  • BH GSO ISO 1628-4:2023 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 4: Polycarbonate (PC) moulding and extrusion materials
  • GSO ISO 20282-1:2016 Ease of operation of everyday products -- Part 1: Design requirements for context of use and user characteristics
  • OS GSO ISO 20282-1:2016 Ease of operation of everyday products -- Part 1: Design requirements for context of use and user characteristics
  • GSO ASTM D5133:2016 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • BH GSO ASTM D5133:2017 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • OS GSO ASTM D5133:2016 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique

Korean Agency for Technology and Standards (KATS), The use characteristics of the viscometer

  • KS M ISO 6388:2003 Surface active agents－Determination of flow properties using a rotational viscometer
  • KS M ISO 6388-2023 Surface active agents－Determination of flow properties using a rotational viscometer
  • KS M ISO 289-2:2018 Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 2: Determination of pre-vulcanization characteristics
  • KS M ISO 6388-2003(2018) Surface active agents－Determination of flow properties using a rotational viscometer
  • KS M ISO 289-2-2023 Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 2: Determination of pre-vulcanization characteristics
  • KS F 2392-2019 Standard test method for viscosity determination of asphalt binder using rotational viscometer
  • KS F 2392-2014 Standard test method for viscosity determination of asphalt binder using rotational viscometer
  • KS M ISO 2884-1:2022 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear
  • KS M ISO 2884-1:2007 Paints and varnishes-Determination of viscosity using rotary viscometers-Part 1:Cone-and-plate viscometer operated at a high rate of shear
  • KS M ISO 289-1-2017(2022) Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity
  • KS X ISO 12644-2006(2021) Graphic technology－Determination of rheological properties of paste inks and vehicles by the falling rod viscometer
  • KS M ISO 289-1-2022 Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity
  • KS M ISO 1628-1-2023 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles
  • KS M ISO 3219-2023 Plastics－Polymers/resins in the liquid state or as emulsions or dispersions－Determination of viscosity using a rotational viscometer with defined shear rate
  • KS A ISO 20282-1:2011 Ease of operation of everyday products-Part 1:Design requirements for context of use and user characteristics
  • KS A ISO 20282-1-2011(2021) Ease of operation of everyday products－Part 1：Design requirements for context of use and user characteristics
  • KS A ISO 20282-1-2011(2016) Ease of operation of everyday products－Part 1：Design requirements for context of use and user characteristics
  • KS A ISO 20282-1-2021 Ease of operation of everyday products－Part 1：Design requirements for context of use and user characteristics
  • KS M ISO 11346:2007 Rubber, vulcanized or thermoplastic－Estimation of life－time and maximum temperature of use
  • KS M ISO 11346:2017 Rubber, vulcanized or thermoplastic－Estimation of life－time and maximum temperature of use
  • KS X ISO 12644-2006(2016) Graphic technology－Determination of rheological properties of paste inks and vehicles by the falling rod viscometer
  • KS M ISO 289-4:2019 Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 4: Determination of the Mooney stress-relaxation rate

BE-NBN, The use characteristics of the viscometer

  • NBN-ISO 6388:1994 Surface active agents - Determination of flow properties using a rotational viscometer
  • NBN T 63-156-1986 Surface active agents - Determination of flow properties using a rotational viscometer
  • NBN EN ISO 3219:1995 Plastics - Polymers/resins in the liquide state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993)

American Society for Testing and Materials (ASTM), The use characteristics of the viscometer

  • ASTM D1200-94(1999) Standard Test Method for Viscosity by Ford Viscosity Cup
  • ASTM D4287-00(2019) Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
  • ASTM D7042-04 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D4040-10 Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer
  • ASTM D1646-81 Standard Test Method for Rubber - Viscosity And Vulcanization Characteristics ( Mooney Viscometer)
  • ASTM D2556-14(2018) Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry
  • ASTM D562-10(2018) Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
  • ASTM D1646-92 Standard Test Method for RubberÐViscosity and Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D7394-18(2023) Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers
  • ASTM D7496-09 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
  • ASTM D4402/D4402M-23 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
  • ASTM D4402/D4402M-15 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
  • ASTM D5225-14 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
  • ASTM D7226-13(2017) Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
  • ASTM D1646-00 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D1646-03 Standard Test Methods for Rubber8212;Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D1646-03a Standard Test Methods for Rubber8212;Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D7042-11a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D1646-04 Standard Test Methods for Rubber8212;Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D1646-07 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D1646-19a Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D1646-15 Standard Test Methods for Rubber&x2014;Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D1646-06 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D1646-07(2012) Standard Test Methods for Rubbermdash;Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D4603-03 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
  • ASTM D4040-10(2019) Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer
  • ASTM D1646-17 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D1646-19 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • ASTM D6067-96(2003) Standard Guide for Using the Electronic Cone Penetrometer for Environmental Site Characterization
  • ASTM D6067-96e1 Standard Guide for Using the Electronic Cone Penetrometer for Environmental Site Characterization
  • ASTM D4603-96 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
  • ASTM D562-10(2023) Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
  • ASTM D4603-03(2011)e1 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
  • ASTM D7279-14 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
  • ASTM D7279-14a Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
  • ASTM D3346-03 Standard Test Methods for Rubber Property8212;Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney)
  • ASTM D3346-00 Standard Test Methods for Rubber Property-Processability of SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer
  • ASTM D7394-18 Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers
  • ASTM D7394-17 Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers
  • ASTM D7741/D7741M-11(2017) Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer
  • ASTM D7741/D7741M-18 Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer
  • ASTM D446-12 Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers
  • ASTM D446-07 Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers
  • ASTM D4989-90a(2008) Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer
  • ASTM D7271-06(2012) Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
  • ASTM D2983-19e1 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
  • ASTM D2983-19 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
  • ASTM D2983-16 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
  • ASTM D2983-20 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
  • ASTM D2983-17 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
  • ASTM D4016-14 Standard Test Method for Viscosity and Gel Time of Chemical Grouts by Rotational Viscometer 40;Laboratory Method41;
  • ASTM D4989-90a(2004) Standard Test Method for the Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer
  • ASTM D6080-10 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
  • ASTM D6080-12 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
  • ASTM D2983-23 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
  • ASTM D2983-22 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
  • ASTM D7741-11 Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Hand Held Viscometer
  • ASTM D4221-18 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
  • ASTM D4221-17 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
  • ASTM D1480-93(1997) Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
  • ASTM A697/A697M-13(2018) Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
  • ASTM D7394-13 Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers
  • ASTM E3054/E3054M-23 Standard Guide for Characterization and Use of Hygrothermal Models for Moisture Control Design in Building Envelopes
  • ASTM D4221-99 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
  • ASTM D4221-99(2005) Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
  • ASTM D2983-21 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
  • ASTM D1338-99(2011) Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
  • ASTM A889/A889M-03 Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Inductions Using the Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm (250-mm) Epstein Frame
  • ASTM A889/A889M-93(1998) Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Inductions Using the Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm (250-mm) Epstein Frame
  • ASTM A889/A889M-14(2020) Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame
  • ASTM F1080-93(1998) Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer
  • ASTM F1080-93(2019) Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer
  • ASTM A927/A927M-11 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
  • ASTM D7271-06 Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
  • ASTM D3346-07 Standard Test Methods for Rubber Property-Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney)
  • ASTM D3346-12 Standard Test Methods for Rubber Propertymdash;Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney)
  • ASTM D4221-11 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
  • ASTM D8162-20 Standard Test Method for Determination of the Apparent Viscosity of Thermoplastic Pavement Marking Materials using a Rotational Viscometer with Temperature Control Heating Unit
  • ASTM D8162-20a Standard Test Method for Determination of the Apparent Viscosity of Thermoplastic Pavement Marking Materials using a Rotational Viscometer with Temperature Control Heating Unit
  • ASTM D4989-90a(1999)e1 Standard Test Method for the Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer
  • ASTM D4989/D4989M-90a(2021) Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer
  • ASTM A697/A697M-03 Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
  • ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
  • ASTM A927/A927M-04 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
  • ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
  • ASTM D5335-14 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges
  • ASTM D2196-15 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
  • ASTM D5592-94 Standard Guide for Material Properties Needed in Engineering Design Using Plastics
  • ASTM D5592-94(2002)e1 Standard Guide for Material Properties Needed in Engineering Design Using Plastics
  • ASTM D5481-96(2001) Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
  • ASTM D5481-96 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
  • ASTM D5481-10 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
  • ASTM D5481-13 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
  • ASTM D5592-94(2010) Standard Guide for Material Properties Needed in Engineering Design Using Plastics
  • ASTM D5592-94(2018) Standard Guide for Material Properties Needed in Engineering Design Using Plastics
  • ASTM C518-10 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
  • ASTM D7416-09 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscome
  • ASTM D4402-87(2000)e1 Standard Test Method for Viscosity Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus
  • ASTM D1338-99(2016) Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
  • ASTM E3331-22 Standard Test Method for Measuring Target Modulus Using the Light Weight Deflectometer on Laboratory Compaction Characteristic Samples
  • ASTM D5133-99 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • ASTM D5133-19 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • ASTM D5133-20 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • ASTM D5133-20a Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • ASTM D5133-15 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • ASTM D1480-02 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
  • ASTM D1480-07 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
  • ASTM D1480-02e1 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
  • ASTM D2196-18 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscountess
  • ASTM D7394-08 Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers
  • ASTM D3164-97 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
  • ASTM D3164-03 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
  • ASTM D905-03 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
  • ASTM A349-68(1977) Test Methods for Alternating-Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 50 to 60 Hz and 50 cm Epstein Frame
  • ASTM E2101-15(2020) Standard Test Method for Measuring the Frictional Properties of Winter-Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer
  • ASTM D664-09 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • ASTM D664-11ae1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • ASTM D6648-08(2016) Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
  • ASTM D6648-08 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
  • ASTM D905-08(2013) Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
  • ASTM D664-18e2 Test Method for Determination of Flexible Creep Hardness of Asphalt Binders Using a Bending Beam Rheometer
  • ASTM D1824-66(1972) Standard Method Of Test For Apparent Viscosity Of Plastisols And Organosols At Low Shear Rates By Brookfield Viscometer
  • ASTM D1824-66(1980)e1 Standard Test Method for Apparent Viscosity Of Plastisols And Organosols At Low Shear Rates By Brookfield Viscometer

CH-SNV, The use characteristics of the viscometer

  • VSM 15261-1934 mineral oil. Viscosity, toughness (determined using a capillary viscometer)
  • SN EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021)
  • SN EN ISO 1628-2:2020 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:2020)

PL-PKN, The use characteristics of the viscometer

  • PN C89408-1986 Plastics -- Determination of viscosity by Hoppler's viscometer and Hoppler's rheoviscometer
  • PN C81554-1986 Determination of the viscosity of paints, varnishes and printing inks bv use Rotothinner's viscometers
  • PN-EN ISO 1628-2-2021-01 E Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 2: Poly(vinyl chloride) resins (ISO 1628-2:2020)

CZ-CSN, The use characteristics of the viscometer

  • CSN 77 0843-1986 Packaging adhesive. Determination of viscosity with rotary viscosimeter
  • CSN 72 1087-1975 Determination of apparent dynamic viscosity of ceramic suspensions by rotary viscosimeter. Identification of reological character of ceramic suspen- sions

British Standards Institution (BSI), The use characteristics of the viscometer

  • BS ISO 289-2:2020 Rubber, unvulcanized. Determinations using a shearing-disc viscometer - Determination of pre-vulcanization characteristics
  • BS EN ISO 2884-1:2006 Paints and varnishes. Determination of viscosity using rotary viscometers. Cone-and-plate viscometer operated at a high rate of shear
  • BS EN ISO 2884-2:2006 Paints and varnishes. Determination of viscosity using rotary viscometers. Disc or ball viscometer operated at a specified speed
  • BS ISO 289-1:2015 Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Determination of Mooney viscosity
  • BS EN ISO 1628-1:2009+A1:2012 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. General principles
  • BS EN ISO 1628-1:2021 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. General principles
  • 19/30388644 DC BS ISO 289-2. Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Part 2. Determination of pre-vulcanization characteristics
  • BS ISO 7700-1:2009 Food products. Checking the performance of moisture meters in use. Moisture meters for cereals
  • BS ISO 7700-1:2008 Food products - Checking the performance of moisture meters in use - Moisture meters for cereals
  • 23/30476592 DC BS EN ISO 2884-2. Paints and varnishes. Determination of viscosity using rotational viscometers - Part 2. Relative measurement of viscosity using disc or ball spindles at specified speeds
  • BS EN ISO 1628-2:2020 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers - Poly(vinyl chloride) resins
  • BS EN ISO 1628-5:2015 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Thermoplastic polyester (TP) homopolymers and copolymers
  • BS ISO 7700-2:2011 Food products. Checking the performance of moisture meters in use. Moisture meters for oilseeds
  • ASTM D4989/D489M-90a(2014)e1 Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer
  • BS ISO 19613:2018 Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement of viscosity of ceramic slurry by use of a rotational viscometer
  • BS ISO 289-2:2016 Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Determination of pre-vulcanization characteristics
  • BS ISO 20282-1:2006 Ease of operation of everyday products - Design requirements for context of use and user characteristics
  • BS EN 16345:2012 Bitumen and bituminous binders. Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer
  • BS ISO 1628-5:1998 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Thermoplastic polyester (TP) homopolymers and copolymers
  • BS DD CEN/TS 15324:2008 Bitumen and bituminous binders - Determination of equiviscous temperature based on low shear viscosity using a dynamic shear rheometer in low frequency oscillation mode
  • BS EN 13999-1:2013 Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. General procedure
  • 20/30406580 DC BS EN ISO 1628-1. Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Part 1. General principles
  • 24/30469287 DC BS EN ISO 1628-1 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
  • BS EN 13999-3:2007+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3:Determination of volatile aldehydes
  • BS EN 13999-3:2007 Adhesives — Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application — Part 3: Determination of volatile aldehydes
  • BS DD ENV 13999-3:2002 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Determination of volatile aldehydes
  • PD ISO/TS 289-4:2017 Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Determination of the Mooney stress-relaxation rate
  • BS ISO 16525-4:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies
  • BS EN 13999-1:2006 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure
  • BS DD ENV 13999-2:2002 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Determination of volatile organic compounds
  • BS DD ENV 13999-4:2002 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Determination of volatile diisocyanates
  • BS EN 13999-2:2013 Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Determination of volatile organic compounds
  • BS EN 13999-2:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Determination of volatile organic compounds
  • BS EN 13999-4:2007+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4:Determination of volatile diisocyanates
  • BS EN 13999-4:2007 Adhesives — Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application — Part 4: Determination of volatile diisocyanates
  • BS 7856:2013 Code of practice for special design and other features of alternating current watthour meters for active energy (MID accuracy classes A and B) for use in the UK
  • DD ENV 13999-1-2001 Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. General procedure
  • BS 5268-7.4:1989(1999) Structural use of timber — Part 7 : Recommendations for the calculation basis for span tables — Section 7.4 Ceiling binders

International Organization for Standardization (ISO), The use characteristics of the viscometer

  • ISO 289-2:2020 Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 2: Determination of pre-vulcanization characteristics
  • ISO 6388:1983 Surface active agents — Determination of flow properties using a rotational viscometer
  • ISO/CD 2884-1:2023 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear
  • ISO/CD 2884-2:2023 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed
  • ISO/DIS 2884-2:2023 Paints and varnishes — Determination of viscosity using rotational viscometers — Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds
  • ISO/DIS 2884-1:2023 Paints and varnishes — Determination of viscosity using rotational viscometers — Part 1: Absolute viscosity measurement with cone-plate measuring geometry at high shear rates
  • ISO 12644:1996 Graphic technology - Determination of rheological properties of paste inks and vehicles by the falling rod viscometer
  • ISO 12634:1996 Graphic technology - Determination of tack of paste inks and vehicles by a rotary tackmeter
  • ISO 12634:2017 Graphic technology - Determination of tack of paste inks and vehicles by a rotary tackmeter
  • ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
  • ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
  • ISO/CD 1628-1:2004 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles
  • ISO 1628-2:2020 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 2: Poly(vinyl chloride) resins
  • ISO 1628-1:2009/Amd 1:2012 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles; Amendment 1
  • ISO 289-2:1994 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 2: Determination of pre-vulcanization characteristics
  • ISO 289-2:2016 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 2: Determination of pre-vulcanization characteristics
  • ISO 16525-2:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 2: Determination of electrical characteristics for use in electronic assemblies
  • ISO 6721-10:1997 Plastics - Determination of dynamic mechanical properties - Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
  • ISO 11346:2004 Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use
  • ISO 11346:2014 Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use
  • ISO 16525-4:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 4: Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies
  • ISO 11003-1:2019 Adhesives — Determination of shear behaviour of structural adhesives — Part 1: Torsion test method using butt-bonded hollow cylinders

KR-KS, The use characteristics of the viscometer

  • KS M ISO 289-2-2018 Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 2: Determination of pre-vulcanization characteristics
  • KS M ISO 6388-2003(2023) Surface active agents－Determination of flow properties using a rotational viscometer
  • KS M ISO 2884-1-2022 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear
  • KS I ISO 12213-3-2023 Natural gas — Calculation of compression factor — Part 3: Calculation using physical properties
  • KS M ISO 289-4-2019 Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 4: Determination of the Mooney stress-relaxation rate
  • KS Q ISO 21748-2018(2023) Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation

The American Road & Transportation Builders Association, The use characteristics of the viscometer

  • AASHTO T 316-2010 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • AASHTO T 316-2013 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • AASHTO T 316-2022 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • AASHTO TP48-1997 Standard Test Method for Viscosity Determination of Asphalt Binder Using Rotational Viscometer 2000 Edition
  • AASHTO T 366-2018 Standard Method of Test for Apparent Viscosity of Hot-Poured Asphalt Crack Sealant Using Rotational Viscometer
  • AASHTO T 316-2002 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer HM-22; Part IIB; Formaly AASHTO TP 4
  • AASHTO TP 85-2010 Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument
  • AASHTO TP 85-2010(R2016) Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument

AASHTO - American Association of State Highway and Transportation Officials, The use characteristics of the viscometer

  • T 316-2011 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • T 316-2010 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • T 316-2004 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • T 316-2006 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • T 316-2013 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • TP48-1997 Standard Test Method for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
  • T 366-2018 Standard Method of Test for Apparent Viscosity of Hot-Poured Asphalt Crack Sealant Using Rotational Viscometer
  • T 366-2017 Standard Method of Test for Apparent Viscosity of Hot-Poured Asphalt Crack Sealant Using Rotational Viscometer
  • T 316-2002 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer (HM-22; Part IIB; Formaly AASHTO TP 4)
  • TP 101-2012 Standard Method of Test for Estimating Fatigue Resistance of Asphalt Binders Using the Linear Amplitude Sweep
  • TP 85-2010 Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument (Revision 1)

German Institute for Standardization, The use characteristics of the viscometer

  • DIN ISO 289-2:2018-12 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 2: Determination of pre-vulcanization characteristics (ISO 289-2:2016)
  • DIN 51562-3:1985-05 Viscometry; determination of kinematic viscosity using the Ubbelohde viscometer; viscosity relative increment at short flow times / Note: To be replaced by DIN 53000-4 (2019-04).
  • DIN EN ISO 2884-1:2006-09 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999); German version EN ISO 2884-1:2006 / Note: To be replaced by DIN EN ISO 3219-2 (2020-02).
  • DIN EN ISO 2884-2:2006-09 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003); German version EN ISO 2884-2:2006 / Note: To be replaced by DIN EN ISO 3219-2 (2020-02).
  • DIN 53000-3:2023-07 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 3: Calibration and determination of the uncertainty of measurement
  • DIN ISO 289-2:2018 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 2: Determination of pre-vulcanization characteristics (ISO 289-2:2016)
  • DIN EN ISO 2884-2:2023 Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds (ISO/DIS 2884-2:2023); German and English version prEN ISO 2884-2:2023
  • DIN ISO 289-1:2018-12 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 1: Determination of Mooney viscosity (ISO 289-1:2015)
  • DIN 51366:2013-12 Testing of mineral oil hydrocarbons - Measurement of kinematic viscosity by means of the Cannon-Fenske viscometer for opaque liquids
  • DIN EN ISO 1628-1:2021-06 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021); German version EN ISO 1628-1:2021
  • DIN ISO 289-1:2018 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 1: Determination of Mooney viscosity (ISO 289-1:2015)
  • DIN EN 16345:2012-09 Bitumen and bituminous binders - Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer; German version EN 16345:2012
  • DIN EN ISO 1628-5:2015-05 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998); German version EN ISO 1628-5:2015
  • DIN EN ISO 1628-2:2020-12 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:2020); German version EN ISO 1628-2:2020
  • DIN EN 14891:2020 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives ？ Essential characteristics and AVCP; German and English version prEN 14891:2020
  • DIN 52007-2:2013 Bitumen and bituminous binders - Determination of viscosity - Part 2: Measurement by drawn-sphere viscometer
  • DIN CEN/TS 15324:2008 Bitumen and bituminous binders - Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode; German version CEN/TS 15324:2008
  • DIN 58960-3:1988 Photometers for analytical tests; concepts for characterisation of technical properties for absorption photometers
  • DIN 58960-3:1988-05 Photometers for analytical tests; concepts for characterisation of technical properties for absorption photometers
  • DIN EN ISO 1628-1:2024 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO/DIS 1628-1:2024); German and English version prEN ISO 1628-1:2024
  • DIN EN ISO 1628-1:2024-02 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO/DIS 1628-1:2024); German and English version prEN ISO 1628-1:2024 / Note: Date of issue 2024-01-19*Intended as replac...
  • DIN EN ISO 2884-2:2023-09 Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds (ISO/DIS 2884-2:2023); German and English version prEN ISO 2884-2:2023 / Note: Da...
  • DIN EN ISO 7759:2010-12 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010); German version EN ISO 7759:2010
  • DIN EN ISO 1628-3:2010-10 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes (ISO 1628-3:2010); German version EN ISO 1628-3:2010
  • DIN 51810-1:2017-04 Testing of lubricants - Testing rheological properties of lubricating greases - Part 1: Determination of shear viscosity by rotational viscosimeter and the system of cone/plate
  • DIN EN 13999-2:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds; German version EN 13999-2:2007
  • DIN EN 13999-3:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes; German version EN 13999-3:2007

Japanese Industrial Standards Committee (JISC), The use characteristics of the viscometer

  • JIS K 6300-1:2001 Rubber, unvulcanized -- Physical property -- Part 1: Determination of Mooney viscosity and pre-vulcanization characteristics with Mooney viscometer
  • JIS K 6300-1:2013 Rubber, unvulcanized.Physical property.Part 1: Determination of Mooney viscosity and pre-vulcanization characteristics with Mooney viscometer
  • JIS K 7367-1:2002 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 1: General principles
  • JIS R 1665:2005 Method for measurement of thixotropy behavior with a rotational viscometer of ceramics slurry
  • JIS K 7367-5:2000 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 5: Thermoplastic polyester (TP) homopolymers and copolymers
  • JIS K 7367-2:1999 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 2: Poly (vinyl chloride) resins

Association Francaise de Normalisation, The use characteristics of the viscometer

  • NF EN 13302:2018 Bitumens and bituminous binders - Determination of the dynamic viscosity of bituminous binders using a rotating viscometer
  • NF T43-005-2*NF ISO 289-2:2020 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 2 : determination of pre-vulcanization characteristics
  • NF EN ISO 2884-2:2006 Paints and varnishes - Determination of viscosity using rotating viscometers - Part 2: disc or ball viscometer operating at specified speed
  • NF EN ISO 2884-1:2006 Paints and varnishes - Determination of viscosity using rotating viscometers - Part 1: cone and plate viscometer operating at high shear rate gradient
  • NF ISO 5351:2010 Pastes - Determination of the limiting viscosity index using a cupri-ethylenediamine (CED) solution
  • NF T43-005-1*NF ISO 289-1:2015 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 1 : determination of Mooney viscosity
  • NF T51-061-1/A1:2012 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1 : general principles.
  • NF T51-061-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1 : general principles.
  • NF T66-054*NF EN 16345:2012 Bitumen and bituminous binders -Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer.
  • NF T51-061-1*NF EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1 : general principles
  • NF EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: general principles
  • NF EN ISO 1628-5:2015 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: homopolymers and copolymers of thermoplastic polyesters (TP)
  • NF EN 16345:2012 Bitumes et liants bitumineux - Mesure du temps d'écoulement des émulsions bitumineuses avec le Viscosimètre Redwood No. II
  • NF T51-061-5*NF EN ISO 1628-5:2015 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5 : thermoplastic polyester (TP) homopolymers and copolymers
  • NF T51-061-2*NF EN ISO 1628-2:2020 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2 : poly(vinyl chloride) resins
  • NF EN ISO 1628-2:2020 Plastics - Determination of viscosity of polymers in dilute solution using capillary viscometers - Part 2: poly(vinyl chloride) resins
  • NF T43-005-2:2006 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 2 : determination of pre-vulcanization characteristics.
  • NF T43-005-2:2016 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 2 : determination of pre-vulcanization characteristics
  • NF T51-212:1998 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscosimeters. Part 1 : general principles.
  • NF EN ISO 1628-3:2010 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: polyethylenes and polypropylenes
  • NF EN 13587:2017 Bitumens and bituminous binders - Determination of the tensile characteristics of bituminous binders using the tensile test method
  • NF T51-712:1999 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Part 2 : poly(vinyl chloride) resins.
  • NF EN 13589:2018 Bitumens and bituminous binders - Determination of the tensile characteristics of modified bitumens using the force-ductility method
  • NF T76-100-2*NF ISO 16525-2:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 2 : determination of electrical characteristics for use in electronic assemblies
  • NF X20-543-1:2014 Natural gas - Calculation of thermodynamic properties - Part 1 : gas phase properties used in transmission and distribution applications
  • NF T76-129:1989 Adhesives for floor coverings. Characteristics and designation of the application equipment. Indexed spattles.
  • NF T70-359:1996 Energetic materials for defense. Physico-chemical analysis and properties. Measurement of the duration of the outflow on the tnt or tnt compositions with the efflux viscosimeter
  • NF T76-140-3*NF EN 13999-3+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3 : determination of volatile aldehydes.
  • NF T76-140-3/IN1*NF EN 13999-3/IN1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3 : determination of volatile aldehydes
  • NF ISO 289-2:2020 Unvulcanized rubber - Determinations using a shear disk consistometer - Part 2: determination of prevulcanization characteristics
  • NF X35-131-1*NF ISO 20282-1:2007 Ease of operation of everyday products - Part 1 : design requirements for context of use and user characteristics
  • NF T76-140-1*NF EN 13999-1:2014 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1 : general procedure
  • NF T46-082*NF ISO 11346:2014 Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use
  • NF T76-100-4*NF ISO 16525-4:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 4 : determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies
  • NF EN ISO 7759:2010 Anodizing aluminum and its alloys - Measuring the reflectivity characteristics of aluminum surfaces using a normal or simplified goniophotometer
  • XP T43-005-4*XP ISO/TS 289-4:2017 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 4 : determination of the Mooney stress-relaxation rate

未注明发布机构, The use characteristics of the viscometer

  • DIN ISO 289-2 E:2018-07 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 2: Determination of pre-vulcanization characteristics
  • ASTM RR-D01-1035 1984 D4287-Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
  • ASTM RR-D04-1031 2009 D7226-Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
  • ASTM RR-D04-1038 2011 D7226-Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
  • ASTM RR-D04-1037 2011 D7226-Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
  • ASTM RR-D02-1856 2017 D8092-Standard Test Method for Field Determination of Kinematic Viscosity Using Microchannel Viscometer
  • ASTM RR-D04-1024 2005 D7226-Standard Test Method for Determining the Viscosity ofEmulsified Asphalts Using a Rotational Paddle Viscometer
  • ASTM RR-D20-1132 1986 D4603-Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
  • DIN ISO 289-1 E:2018-07 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 1: Determination of Mooney viscosity
  • DIN 51366 E:2013-02 Testing of mineral oil hydrocarbons - Measurement of kinematic viscosity by means of the Cannon-Fenske viscometer for opaque liquids
  • DIN 51366:1997 Testing of mineral oil hydrocarbons - Measurement of kinematic viscosity by means of the Cannon-Fenske viscometer for opaque liquids
  • ASTM RR-D02-1673 2009 D2983-Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
  • ASTM RR-D02-1821 2015 D2983-Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
  • ASTM RR-D02-1486 2000 D2983-Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
  • ASTM RR-D02-1677 2009 D2983-Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
  • DIN 52007-2:1980 Bitumen and bituminous binders - Determination of viscosity - Part 2: Measurement by drawn-sphere viscometer
  • DIN EN ISO 1628-3:2003 Plastics – Determination of viscosity of polymers in dilute solution using capillary viscometers – Part 3: Polyethylene and polypropylene
  • ASTM RR-D02-1891 2018 D8210-Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
  • ASTM RR-D04-1039 2011 D7741/D7741M-Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer
  • ASTM RR-D02-1702 2010 D7417-Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
  • DIN 51810-1 E:2016-09 Testing of lubricants - Testing rheological properties of lubricating greases - Part 1: Determination of shear viscosity by rotational viscosimeter and the system of cone/plate
  • ASTM RR-E37-2001 2022 E3070 - Standard Test Method for Shear Thinning Index of Non-Newtonian Liquids Using a Rotational Viscometer
  • ASTM RR-D02-1511 2001 D5133-Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • ASTM RR-D02-1568 2003 D5133-Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • ASTM RR-D02-1448 1999 D5133-Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • DIN EN 13999-2 E:2012-07 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds

RU-GOST R, The use characteristics of the viscometer

  • GOST R ISO 6388-1993 Serface active agents. Determination of flow properties using a rotational viscosimeter
  • GOST 33137-2014 Automobile roads of general use. Viscous road petroleum bitumens. Method for determination of dynamic viscosity by rotational viscometer
  • GOST R 54552-2011 Rubber and rubber compounds. Determination of viscosity, stress relaxation and pre-vulcanization characteristics by Mooney viscometer
  • GOST R 54552-2011(2018) Rubber and rubber compounds. Determination of viscosity, stress relaxation and pre-vulcanization characteristics by Mooney viscometer
  • GOST R ISO 289-1-2017 Rubbers and rubber compounds. Tests using a shearing-disc viscometer. Part 1. Determination of Mooney viscosity
  • PNST 6-2012 Automobile roads of general use. Viscous petroleum road bitumens. Test method determination of dynamic viscosity by rotational viscometer
  • GOST R 51414-1999 Wheat flour. Physical characteristics of doughs. Determination of water absorption and rheological properties using a valorigraph
  • GOST 27905.2-1988 Electrical insulation systems. Evaluation of performances evaluation, ageing mechanism, diagnostic procedures

TR-TSE, The use characteristics of the viscometer

  • TS 2009-1975 DETERMINATION OF VISCOSITY OF NATURAL AND SYNTHETIC RUBBERS BY THE SHEAR?NG D?SK VISCOMETER
  • TS 638-1968 DETERMINATION OF VISCOSITY OF NATURAL AND SYNTHETIC RUBBERS BY THE SHEARING D?SK VISCOMETER
  • TS 1970-1975 COMPOUNDED RUBBER — DETERMINATION OF RATE OF CURE USING THE SHEARING D?SK VISCOMETER

SCC, The use characteristics of the viscometer

  • BS ISO 289-1:2005 Rubber, unvulcanized. Determinations using a shearing-disc viscometer-Determination of Mooney viscosity
  • DANSK DS/EN ISO 2884-1:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear
  • DANSK DS/EN ISO 2884-2:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed
  • DIN 53000-4 E:2019 Draft Document - Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 4: Viscosity relative increment at short flow times
  • NS-EN ISO 2884-2:2006 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003)
  • NS-EN ISO 2884-1:2006 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999)
  • BS EN ISO 1628-1:2009 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. General principles
  • DIN ISO 289-2 E:2018 Draft Document - Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 2: Determination of pre-vulcanization characteristics (ISO 289-2:2016); Text in German and English
  • DIN 53000-3 E:2019 Draft Document - Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 3: Calibration and determination of the uncertainty of measurement
  • DANSK DS/ISO 1628-1:2021 Plastics – Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 1: General principles
  • DANSK DS/EN ISO 1628-1/A1:2009 Plastics – Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 1: General principles
  • DIN 51366 E:2013 Draft Document - Testing of mineral oil hydrocarbons - Measurement of kinematic viscosity by means of the Cannon-Fenske viscometer for opaque liquids
  • DANSK DS/EN 16345:2012 Bitumen and bituminous binders - Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer
  • DANSK DS/EN ISO 1628-5:2015 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers
  • DANSK DS/ISO 1628-2:2020 Plastics – Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 2: Poly(vinyl chloride) resins
  • NS-EN 16345:2012 Bitumen and bituminous binders — Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer
  • DANSK DS/EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
  • DANSK DS/EN ISO 1628-3:2010 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes
  • NS-EN ISO 1628-1:2021 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles (ISO 1628-1:2021)
  • DANSK DS/EN ISO 1628-1:2021 Plastics – Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 1: General principles (ISO 1628-1:2021)
  • DIN ISO 289-1 E:2018 Draft Document - Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 1: Determination of Mooney viscosity (ISO 289-1:2015); Text in German and English
  • NS-EN ISO 1628-1:2009 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles (ISO 1628-1:2009)
  • NS-EN ISO 1628-5:2015 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998)
  • DIN EN 16345 E:2011 Draft Document - Bitumen and bituminous binders - Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer
  • NS-EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010)
  • NS-EN ISO 1628-2:2020 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 2: Poly(vinyl chloride) resins (ISO 1628-2:2020)
  • DANSK DS/EN ISO 1628-2:2020 Plastics – Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 2: Poly(vinyl chloride) resins (ISO 1628-2:2020)
  • DIN EN ISO 1628-5 E:2014 Draft Document - Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998); German version FprEN ISO 1628-5:2014
  • BS PD ISO/TS 289-4:2017 Rubber, unvulcanized. Determinations using a shearing-disc viscometer-Determination of the Mooney stress-relaxation rate
  • NS-EN ISO 1628-3:2010 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 3: Polyethylenes and polypropylenes (ISO 1628-3:2010)
  • DIN EN ISO 7759 E:2009 Draft Document - Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surface using a goniophotometer or an abridged goniophotometer (ISO/DIS 7759:2009); German version prEN ISO 7759:2009
  • BS DD ISO/TS 21748:2004 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
  • DIN EN ISO 1628-1/A1 E:2011 Draft Document - Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometer - Part 1: General principles (ISO 1628-1:2009/DAM 1:2011); German version EN ISO 1628-1:2009/prA1:2011
  • CEI EN 60216-8:2014 Electrical insulating materials - Thermal endurance properties Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures
  • ISO 12213-3:1997/DAmd 1 Natural gas — Calculation of compression factor — Part 3: Calculation using physical properties — Amendment 1
  • DIN EN ISO 1628-3 E:2008 Draft Document - Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes (ISO/DIS 1628-3:2008); German version prEN ISO 1628-3:2008

AENOR, The use characteristics of the viscometer

  • UNE 55522:1991 SURFACE ACTIVE AGENTS. DETERMINATION OF RHEOLOGICAL BEHAVIOUR USING A ROTATIONAL VISCOMETER.
  • UNE-EN ISO 2884-2:2007 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003)
  • UNE-EN ISO 2884-1:2007 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999)
  • UNE-EN 16345:2012 Bitumen and bituminous binders - Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer
  • UNE-ISO 289-1:2007 Rubber, unvulcanized. Determinations using a shearing-disc viscosimeter. Part 1: Determination of Mooney viscosity (ISO 289-1:2005)
  • UNE-EN ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2009)
  • UNE-EN ISO 1628-5:2015 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998)
  • UNE-EN ISO 7759:2011 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010)
  • UNE-EN ISO 1628-2:1999 PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 2: POLY(VINYL CHLORIDE) RESINS (ISO 1628-2:1998)
  • UNE-EN ISO 1628-3:2011 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes (ISO 1628-3:2010)
  • UNE-ISO 1628-4:2013 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials
  • UNE-EN ISO 3219:1995 PLASTICS. POLYMERS/RESINS IN THE LIQUID STATE OR AS EMULSIONS OR DISPERSIONS. DETERMINATION OF VISCOSITY USING A ROTATIONAL VISCOSIMETER WITH DEFINED SHEAR RATE. (ISO 3219:1993).
  • UNE-EN ISO 1628-1:2009/A1:2012 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles - Amendment 1 (ISO 1628-1:2009/Amd 1:2012)
  • UNE-EN ISO 12213-3:2010 Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006)

European Committee for Standardization (CEN), The use characteristics of the viscometer

  • prEN ISO 2884-1 rev Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear
  • prEN ISO 2884-2 rev Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed
  • prEN ISO 2884-2 Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds (ISO/DIS 2884-2:2023)
  • EN ISO 1628-5:2015 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers
  • prEN ISO 1628-1 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO/DIS 1628-1:2024)
  • FprEN 14891-1-2021 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Part 1: Essential characteristics and AVCP

VE-FONDONORMA, The use characteristics of the viscometer

  • COVENIN 684-1974 Venezuelan pigment standards measure viscosity using a viscometer

Danish Standards Foundation, The use characteristics of the viscometer

  • DS/EN ISO 2884-1:2006 Paints and varnishes – Determination of viscosity using rotary viscometers – Part 1: Cone-and-plate viscometer operated at a high rate of shear
  • DS/EN ISO 2884-2:2006 Paints and varnishes – Determination of viscosity using rotary viscometers – Part 2: Disc or ball viscometer operated at a specified speed
  • DS/EN ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
  • DS/EN 16345:2013 Bitumen and bituminous binders - Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer
  • DS/EN ISO 1628-2:1999 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins
  • DS/EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
  • DS/EN ISO 1628-3:2010 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes
  • DS/EN ISO 1628-1/A1:2012 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles - Amendment 1
  • DS/EN ISO 1628-1:2021 Plastics – Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 1: General principles (ISO 1628-1:2021)
  • DS/EN ISO 3219+AC:1996 Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate
  • DS/EN ISO 12213-3:2009 Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties

Society of Automotive Engineers (SAE), The use characteristics of the viscometer

  • SAE AS9968A-2021 Laboratory Viscosity Measurement of Thickened Aircraft Deicing/Anti-icing Fluids with a Viscometer
  • SAE AS9968-2014 Laboratory Viscosity Measurement of Thickenend Aircraft Deicing/Anti-icing Fluids with the Brookfield LV Viscometer
  • SAE AMS3364C-1990 Silicone Rubber Compound Room Temperature Vulcanizing, 50,000 Centipoise Viscosity Short Application Life, Durometer 35 - 55

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The use characteristics of the viscometer

  • GB/T 5561-1994 Surface active agents--Determination of viscosity and flow properties using a rotational viscometer
  • GB/T 5561-2012 Surface active agents.Determination of viscosity and flow properties using a rotational viscometer
  • GB/T 1233-1992 Rubber,unvulcanized--Determination of prevulcanization characteristics--Shearing disk method
  • GB/T 1233-2008 Rubber,unvulcanized.Determinations of pre-vulcanization characteristic using a shearing disc viscometer

Lithuanian Standards Office , The use characteristics of the viscometer

  • LST EN ISO 2884-2:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003)
  • LST EN ISO 2884-1:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999)
  • LST EN 16345-2012 Bitumen and bituminous binders - Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer
  • LST EN ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2009)
  • LST EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021)
  • LST EN ISO 7759:2011 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010)
  • LST EN ISO 1628-2:2000 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:1998)
  • LST EN ISO 1628-3:2010 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes (ISO 1628-3:2010)
  • LST EN ISO 3219:2000 Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993)
  • LST EN ISO 1628-1:2009/A1:2012 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles - Amendment 1 (ISO 1628-1:2009/Amd.1:2012)
  • LST EN ISO 12213-3:2010 Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006)

ES-UNE, The use characteristics of the viscometer

  • UNE-ISO 289-1:2018 Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Part 1: Determination of Mooney viscosity
  • UNE-EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021)
  • UNE-EN ISO 1628-2:2022 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:2020)

Standard Association of Australia （SAA）, The use characteristics of the viscometer

  • AS 2341.4:1994 Methods of testing bitumen and related roadmaking products - Determination of dynamic viscosity by rotational viscometer

Indonesia Standards, The use characteristics of the viscometer

  • SNI ISO 289-1:2012 Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity

VN-TCVN, The use characteristics of the viscometer

  • TCVN 6090-1-2015 Rubber,unvulcanized - Determinations using a shearing-disc viscometer .Part 1:Determination of Mooney viscosity
  • TCVN 6090-1-2010 Rubber, unvulcanized.Determinations using a shearing-disc viscometer.Part 1: Determination of Mooney viscos

FI-SFS, The use characteristics of the viscometer

  • SFS-ISO 1628/1 E:1986 Guidelines for the standardization of methods for the determination of viscosity number and limiting viscosity number of polymers in dilute solution.part 1:General conditions

IT-UNI, The use characteristics of the viscometer

  • UNI EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
  • UNI 7318-1974 Elastic Materials: Testing of Vulcanized Materials, International Hardness Scale Determination of Standard Specimens Using Durometers and Microhardness Testers

YU-JUS, The use characteristics of the viscometer

  • JUS H.B8.435-1984 Phthalate, maleate and adipate esters for industrial use. Determination ofviscosity on 2(fCby means of viscometre by Hoppler.

(U.S.) Ford Automotive Standards, The use characteristics of the viscometer

  • FORD ESS-M11P24-A1-2013 ADHESIVE, MALE THREADED FASTENER - FOR SERVICE TEMPERATURES BELOW 135 °C ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESS-M11P24-A2-2013 ADHESIVE, MALE THREADED FASTENER - FOR SERVICE TEMPERATURES BELOW 65 °C ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESS-M11P24-A1)
  • FORD WSS-M7C97-A2-2011 CAVITY WAX, HEAT KICK 60 °C, IMPROVED CREEP CHARACTERISTIC, LOW VISCOSITY CORROSION PROTECTION, AUTOMOTIVE CAVITIES ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M99J377-A3-2012 COATING, CONFORMAL, SOLVENT FREE SILICONE, VERY LOW VISCOSITY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D694-A-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), 63 DUROMETER D HARDNESS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M11P48-A-2010 TAPE, PERFORMANCE, PRESSURE SENSITIVE ADHESIVE, TWO SIDED, EXTERIOR, WEATHERSTRIP ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D693-A1-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), 55 DUROMETER D HARDNESS, INJECTION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2D507-B4-2014 THERMOPLASTIC ELASTOMER (TPS) STYRENE BLOCK COPOLYMER, 70 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2D507-B5-2014 THERMOPLASTIC ELASTOMER (TPS) STYRENE BLOCK COPOLYMER, 80 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2D507-B4)
  • FORD ESB-M33J100-A2-2012 ENAMEL, ACRYLIC, HIGH SOLIDS, LOW VOC, EXTERIOR, REDUCED VISCOSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESB-M33J100-A)
  • FORD WSB-M4D871-A3-2021 POLYVINYL CHLORIDE (PVC), FLEXIBLE, 75 A DUROMETER HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSB-M4D871-A1)
  • FORD WSB-M4D871-A2-2021 POLYVINYL CHLORIDE (PVC), FLEXIBLE, 65 A DUROMETER HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSB-M4D871-A1)
  • FORD ESB-M2G200-B-2014 ADHESIVE, EPOXY - MICROENCAPSULATED - IMPROVED HEAT RESISTANCE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2D243-A6-2010 POLYURETHANE (POLYETHER BASED) FOAM, FLAME BONDABLE, 24 ?26 kg/m3 density ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2D517-A4-2014 THERMOPLASTIC ELASTOMER (TPS) STYRENE BLOCK COPOLYMER, MEDIUM HEAT RESISTANT 70 DUROMETER A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2D517-A2)
  • FORD WSS-M2D517-A4-2020 THERMOPLASTIC ELASTOMER (TPS) STYRENE BLOCK COPOLYMER, MEDIUM HEAT RESISTANT 70 DUROMETER A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2D517-A2)

AT-ON, The use characteristics of the viscometer

  • OENORM EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021)

ESDU - Engineering Sciences Data Unit, The use characteristics of the viscometer

  • ESDU 92008-1992 Direct prediction of a separation boundary for aerofoils using a viscous-coupled calculation method.

International Telecommunication Union (ITU), The use characteristics of the viscometer

  • ITU-R M.2059-2014 Operational and technical characteristics and protection criteria of radio altimeters utilizing the band 4 200-4 400 MHz

SG-SPRING SG, The use characteristics of the viscometer

  • SS 5 Pt.B12-1987 Methods Of Test For Paints, Varnishes And Related Materials Part B12: Consistency Of Paints Using The Stormer Viscometer

IPC - Association Connecting Electronics Industries, The use characteristics of the viscometer

  • IPC TM-650 2.6.21B-2011 Service Temperature of Metal-Clad Flexible Laminate@ Cover Material and Adhesive Bonding Films

Professional Standard - Energy, The use characteristics of the viscometer

  • NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)

国家能源局, The use characteristics of the viscometer

  • SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)

ZA-SANS, The use characteristics of the viscometer

  • SANS 1628-2:1998 Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 2: Poly(vinyl chloride) resins

GOST, The use characteristics of the viscometer

  • GOST R 59937-2021 Soils. Method for laboratory determination of strength characteristics by ring shear

  Use characteristics of second-hand liquid phase, Use characteristics of second-hand mass spectrometers, The use characteristics of the sleeve labeling machine, The use characteristics of the second-hand gas phase, Features of Infrared Spectroscopy, Features of the spectrometer, How to use the viscometer, Use of Viscometer, Measuring Microscope Features, Features of the microscope, How to use the product type viscometer, Use characteristics of portable viscometer, The use characteristics of the viscometer, Use characteristics of rotational viscometer, Viscosity Cups for Viscometers, The use and principle of viscometer, Viscometer use characteristics, Characteristics of rotational viscometer, How the viscometer works, Features of Portable Viscometer.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved