ZH
RU
ES

Metal Carbon Meter

Metal Carbon Meter, Total:340 items.

In the international standard classification, Metal Carbon Meter involves: Ferroalloys, Analytical chemistry, Equipment for processing of minerals, Testing of metals, Non-ferrous metals, Non-destructive testing, Measurement of volume, mass, density, viscosity, Construction of waterways and ports, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Mechanical testing, Iron and steel products, Environmental testing, Materials for the reinforcement of composites, Linear and angular measurements, Powder metallurgy, Surface treatment and coating, Metrology and measurement in general, On-board equipment and instruments, Air quality, Standardization. General rules, Construction industry, Petroleum products in general, Water quality, Power stations in general, Lamps and related equipment, Optics and optical measurements, Welding, brazing and soldering, Cans. Tins. Tubes, Test conditions and procedures in general, Construction materials, Bottles. Pots. Jars, Fasteners, Terminology (principles and coordination), Materials for aerospace construction, Ferrous metals, Road vehicles in general, Environmental protection, Chipless working equipment, Medical equipment, Equipment for petroleum and natural gas industries, Coals, Mining equipment, Shipbuilding and marine structures in general, Inorganic chemicals, Horology, Extraction and processing of petroleum and natural gas, Electricity. Magnetism. Electrical and magnetic measurements, Diagnostic, maintenance and test equipment, Measurement of force, weight and pressure, Rubber and plastics products, Printed circuits and boards, Dentistry.


American Society for Testing and Materials (ASTM), Metal Carbon Meter

  • ASTM E191-64(2011) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
  • ASTM E191-64(2017) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
  • ASTM G152-05 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM E191-64(2005) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
  • ASTM G153-04 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM G152-04 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM G152-06 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM G152-00a Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM G152-00 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM G152-00ae1 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM G153-00a Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM G153-00ae1 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM G153-00 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM G152-13 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM G153-13 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM G152-13(2021) Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM A833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
  • ASTM A833-84(1996) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
  • ASTM A833-08 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
  • ASTM A121-13(2017) Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
  • ASTM A1003/A1003M-05 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
  • ASTM A1003/A1003M-10 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
  • ASTM E1941-98 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
  • ASTM E1941-04 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
  • ASTM A1003/A1003M-13b Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
  • ASTM B636-84(2006)e1 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
  • ASTM B636-84(2001) Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
  • ASTM B636-84(1992)e1 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
  • ASTM E1941-10 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
  • ASTM A121-07 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
  • ASTM A121-19 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
  • ASTM A121-22 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
  • ASTM A121-13 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
  • ASTM A1003/A1003M-01 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
  • ASTM A1003/A1003M-00 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
  • ASTM A1003/A1003M-02 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
  • ASTM A1003/A1003M-02a Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
  • ASTM A1003/A1003M-08 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
  • ASTM A1003/A1003M-09 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
  • ASTM A1003/A1003M-11e1 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
  • ASTM A1003/A1003M-12 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
  • ASTM A1003/A1003M-14 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
  • ASTM A1003/A1003M-15 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members

RU-GOST R, Metal Carbon Meter

  • GOST 27069-1986 Ferroalloys, metal chromium and metal manganese. Methods for determination of carbon
  • GOST 22720.3-1977 Rare metals and their alloys. Method for the determination of carbon
  • GOST 22720.1-1977 Rare metals and their alloys. Methods for the determination of oxygen, hydrogen, nitrogen and carbon
  • GOST 8.398-1980 State system for ensuring the uniformity of measurements. Hardness testing machines for metals and alloys. Methods and means of verification
  • GOST 22720.0-1977 Rare metals and their alloys. General requirements for the methods of determination of oxygen, hydrogen, nitrogen and carbon
  • GOST 8.044-1980 State system for ensuring the uniformity of measurements. Diamond indentors of the hardness testing machines for metal and alloys. Verification methods and means
  • GOST 20899-1998 Metallic powders. Determination of flowability by means of a calibrated funnel (Hall flowmeter)
  • GOST 20899-1975 Metal powders. Method of yield determination
  • GOST ISO 9918-2012 Capnometers for use with humans. Requirements
  • GOST R ISO 9918-1999 Capnometers for use with humans. Requirements
  • GOST 11679.2-1976 Rubber-metal shock-absorbers for instruments. Fitting. Specifications
  • GOST 30642-1999 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for carbon content

CZ-CSN, Metal Carbon Meter

  • CSN 65 2025-1962 Testíng of technical alkali carbonates
  • CSN 25 0252-1964 Calibration of machines for creep testing of metals.
  • CSN 42 0624-1987 Chemical analysis of non-ferrous metals and alloys. Nonferrous metals and alloys. Determination of sulphur by automatic analyzers
  • CSN 42 0641 Cast.11-1984 Chemical analysis of non-ferrous metals and alloys. Nickel alloys. Determination of carbon by the titrimetric method and methods with the use of automatic analyzers
  • CSN ISO 4518:1994 Metallic coatings. Measurement of coating thickness. Profilometric method
  • CSN 42 0542-1987 Cast iron, pig iron, steel, iron-based alloys, metallic chromium and manganese. Methods for determination of the content of carbon
  • CSN 42 0435-1986 Testing of metals Testing of plastic strain ratio

PL-PKN, Metal Carbon Meter

  • PN H04707-1991 Non-ferrous metals and alloys. Determination of carbon content
  • PN H04232-03-1986 Chemical analysis of alloy components Chromium metallic Determination of carbon
  • PN H92601-1971 Carbon steel Wire rod for po?ented wire

IN-BIS, Metal Carbon Meter

BE-NBN, Metal Carbon Meter

Professional Standard - Machinery, Metal Carbon Meter

  • JB/T 11117-2010 Metal detector for separate material
  • JB/T 11605-2013 Non-destructive testing instruments.Metal magnetic memory instrument specification
  • JB/T 11606-2013 Non-destructive testing instruments.Metal magnetic memory instrument verification
  • JB/T 6831-1993 Carbon fiber pointer for electric measuring instrument

Korean Agency for Technology and Standards (KATS), Metal Carbon Meter

  • KS D 1780-1993 General rules for determination of carbon in metallic materials
  • KS D 1780-2016 General rules for determination of carbon in metallic materials
  • KS D 1780-2016(2021) General rules for determination of carbon in metallic materials
  • KS D 1780-2011 General rules for determination of carbon in metallic materials
  • KS D ISO 9717:2009 Phosphate conversion coatings for metals-Method of specifying requirements
  • KS D ISO 9717:2013 Phosphate conversion coatings for metals-Method of specifying requirements
  • KS D ISO 4518-2012(2017) Metallic coatings－Measurement of coating thickness－Profilometric method
  • KS D ISO 14577-4:2011 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 4:Test method for metallic and non-metallic coatings
  • KS D ISO 11873:2021 Hardmetals — Determination of sulfur and carbon contents in cobalt metal powders — Infrared detection method
  • KS D ISO 11873-2011(2016) Hardmetals－Determination of sulfur and carbon contents in cobalt metal powders－Infrared detection method
  • KS D ISO 11873:2011 Hardmetals－Determination of sulfur and carbon contents in cobalt metal powders－Infrared detection method
  • KS B 5551-2004(2019) Impact testing machines for metallic materials－Instrumentation
  • KS B 0531-1994 Classification and testing methods for deposited metal of submerged arc welding for carbon steel and low alloy steel
  • KS B ISO 376-2002(2012) Metallic materials－Calibration of force－proving instruments used for the verification of uniaxial testing machines
  • KS R 3033-1984 Simplified carbonmonoxide testers for automobiles
  • KS R 3033-2013 Simplified carbonmonoxide testers for automobiles
  • KS R 3033-1984(2011) Simplified carbonmonoxide testers for automobiles
  • KS D ISO 4519:2009 Electrodeposited metallic coatings and related finishes－Sampling procedures for inspection by attributes
  • KS D ISO 3497-2002(2017) Metallic coatings－Measurement of coating thickness－X-ray spectrometric methods
  • KS B 5551-2004 Impact testing machines for metallic materials－Instrumentation

Japanese Industrial Standards Committee (JISC), Metal Carbon Meter

  • JIS Z 2615:1996 General rules for determination of carbon in metallic materials
  • JIS Z 2615:2009 General rules for determination of carbon in metallic materials
  • JIS Z 2615:2015 General rules for determination of carbon in metallic materials
  • JIS Z 2615 AMD 1:2006 General rules for determination of carbon in metallic materials (Amendment 1)
  • JIS B 7755:2011 Charpy pendulum impact test for metal -- Instrumentation
  • JIS B 7741:1991 Extensometers used in metallic material tensile testing
  • JIS Z 3183:2012 Classification for deposited metal of submerged arc welding for carbon steel and low alloy steel
  • JIS G 1323-1:2017 Method for chemical analysis of chromium metal -- Part 1: Determination of carbon content
  • JIS M 7605:1993 Detector tube type carbon monoxide measuring instruments (Colour-intensity)
  • JIS B 7755:1993 Impact testing machines for metallic materials -- Instrumentation
  • JIS M 7650:1993 Detector tube type carbon monoxide measuring instruments (Length-of-stain)
  • JIS G 1322-2:2010 Method for chemical analysis of metallic silicon -- Part 2: Methods for determination of carbon content

Indonesia Standards, Metal Carbon Meter

HU-MSZT, Metal Carbon Meter

RO-ASRO, Metal Carbon Meter

  • STAS 4605/16-1980 NON METAL-BEARING MINING PRODUCTS "WITH CARBONATE CONTENT Detennination of carbon dioxide
  • STAS 11607-1981 LOW AND MEDIUM ALLOYED CARBON STEELS Spectrographic analysis
  • STAS 8264/1-1983 HARD METALS Metallographie determination of porosity and uneombined carbon
  • SR ISO 4498-2:1996 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
  • STAS 4605/10-1980 NON METAL-BEARING MINING PRODUCTS WITH CARBONATE CONTENT Determination of magnesium oxide
  • STAS 4605/3-1980 NON METAL-BEARING MINING PRODUCTS WITH CARBONATE CONTENT Determinntion of loss ignition
  • STAS 4605/2-1974 NON-METAL-BEARING MINING PRODUCTS WITH CARBONATE CONTENT Determination of moisture content
  • STAS 4605/14-1972 NON-METAL BEARING MIXIXG PRODUCTS WITH CARBONATF CONTENT Determination of phosphorus penloxide
  • STAS 4605/5-1972 NON-METAL BEARING MINING PRODUCTS WITH CARBONATE CONTENT Determination of iron triox'de
  • STAS 4605/8-1972 NON-METAL BEARING .MINING PRODUCTS WITH CARBONATE CONTENT Determinaticm of mnnganese oxide
  • STAS 4605/9-1988 NON-METAL BEARING MINING PRODUCTS WITH CARBONATES CONTENT Calcium oxide content determinationc
  • STAS 4605/4-1972 NON-.METAI. BEAHING MINING PRODUCTS WITH CARHONATH CONTENT noterminatioii of silica
  • STAS 7603-1966
  • STAS 4605/11-1972 NON-METAL BEARING MINING PRODI'CTS "WITH CARBONATE CONTENT Determinat ion of sodiuni and potassium oxide
  • STAS 10385-1975 Testing of metals DRIFT EXPANDING TEST ON LIGHT METAL AND LIGHT METAL ALLOY TUBES
  • STAS 1750-1980 Testing of metals TWISTING TEST FOR WIRE
  • STAS 1750-1990 Tests of metals. Twisting test for wire
  • STAS 9806-1974 Tests of metals METHOD FOR DETERMINING THE DEPTH OF CARBURIZED LAYER BY MEASURING THE HARDNESS
  • STAS 10907-1977 NON-METALLIFEROUS MINING PRODUCTS WITH CARBONATES CONTENT Sampling
  • STAS 4605/7-1972 NON-METAL BEAR IN G MINING PRODUCTS WITH CARBONATE CONTENT Determinalion of titanium dioxide
  • STAS 9208/7-1981 FERROTITANIUM Determination of carbon
  • STAS 9162-1973 NON-METAL BEARING MINING PRODUCTS WITH CARBONATE CONTENT Determination of grain size
  • STAS 6638-1987 Metals tcsting HIGH TEmpEratuResTEns1lE tEst of mEtaiLEc matEriat.s
  • STAS 12072-1982 Testing of metals TESTING OF PLATED STEELS AT SHEARING STRENGTH
  • STAS 4605/6-1988 NON-METAL BEARING MINING PRODUCTS WITH CARBONATES CONTENT Aluminium trioxide determination
  • STAS 12287-1985 Metal testings Metal testings

National Metrological Verification Regulations of the People's Republic of China, Metal Carbon Meter

Professional Standard - Traffic, Metal Carbon Meter

  • JT/T 576-2015 Water transport engineering.Nonmetal ultrasonic detector
  • JT/T 576-2004 Water transport engineering.Nonmetal ultrasonic detector

Jilin Provincial Standard of the People's Republic of China, Metal Carbon Meter

Defense Logistics Agency, Metal Carbon Meter

U.S. Air Force, Metal Carbon Meter

Association Francaise de Normalisation, Metal Carbon Meter

  • NF T25-107:2011 Carbon fibers - Chemical analysis - Determination of metal impurities.
  • NF EN ISO 3908:2009 Métaux-durs - Dosage du carbone insoluble (libre) - Méthode gravimétrique
  • NF A91-501:2013 Metallic and other inorganic coatings - Phosphate conversion coating of metals
  • NF ISO 1651:1995 Mandrins d'étirage de tubes, à noyau en métaux-durs (carbures métalliques) - Dimensions.
  • NF T25-112:2011 Carbon fibers - Chemical analysis - Determination of the metalloid elements.
  • NF EN ISO 7625:2012 Matériaux métalliques frittés, à l'exclusion des métaux-durs - Préparation des échantillons pour analyse chimique en vue du dosage du carbone
  • NF H33-006:1989 Metal containers. Hermetically metal cans for carbonated drinks. Designation and dimensional characteristics.
  • NF A91-114:1995 Metallic coatings. Measurement of coating thickness. Profilometric method.
  • NF ISO 242:2014 Plaquettes à braser en carbures métalliques pour outils de tour
  • NF A95-331*NF EN ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
  • NF A91-149*NF EN ISO 15720:2001 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography.
  • NF A95-348:1984 Powder metallurgy. Sintered ferrous materials, carburized or carbonitried. Determination of effective case depth by the Vickers microhardness testing method.
  • NF ISO 1684:1995 Filières d'étirage et de tréfilage à noyau en métaux-durs (carbures métalliques) - Spécification.

SE-SIS, Metal Carbon Meter

  • SIS SS IEC 250:1982 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
  • SIS SS IEC 248:1988 Nuclear instrumen ta tion — Dimensions of planchets usedin nuclear electronic instruments
  • SIS SS 06 11 01-1990 Welding electrodes — Wire electrodes and tubular wires for gas metal arc welding and metal arc welding of carbon steel, carbon-manganese alloyed steel, microalloyed steel and low-alloyed steel — Weld metal test specimens for all-weld-metal tests
  • SIS SS 06 40 25-1985 Metal arc welding with covered electrodes of carbon, carbon manganese and microalloyed steels
  • SIS SS 06 13 01-1990 Consumables — Wire electrodes and fluxes for submerged-arc welding of carbon steels, carbon-manganese steels, microalloyed steel and low-alloyed steels — Weld metal test specimens for all-weld-metal tests
  • SIS SS 06 11 02-1990 Welding electrodes — Wire electrodes and tubular wires for gas metal arc welding and metal arc welding of carbon steel, carbon-manganese alloyedsteel, microalloyed steel and low-alloyed steel — Welds and v/eld meta! bars for butt weld tests
  • SIS MNC 990-1990 Welding electrodes — Tubular wires for gas metal are welding and metal are welding of carbon steels, carbon-manganese steels and microalloyed steels — Summary
  • SIS SS 06 11 02-1984 Welding electrodes — Wire electrodes for gas metal arc welding of carbon steel, carbon-manganese alloyed steel, microalloyed steel with increased yield strength and low alloyed steel - Welds and weld metal bars for butt weld tests
  • SIS SS 06 01 41-1990 Welding electrodes — Tubular wires for gas metal arc welding and metal arc welding of carbon steels, carbon-manganese steels and microalloyed steels — Technical requirements for inspection and deliver/
  • SIS SS 11 26 58-1983 Metallic materials - Wire - Wrapping test

International Organization for Standardization (ISO), Metal Carbon Meter

  • ISO 4518:1980 Metallic coatings; Measurement of coating thickness; Profilometric method
  • ISO 9717:2010 Metallic and other inorganic coatings - Phosphate conversion coating of metals
  • ISO 9717:2017 Metallic and other inorganic coatings - Phosphate conversion coating of metals
  • ISO 4498-2:1981 Sintered metal materials, excluding hardmetals; Determination of apparent hardness; Part 2 : Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
  • ISO 11873:2005/cor 1:2008 Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders - Infrared detection method; Technical Corrigendum 1
  • ISO 11873:2005 Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders - Infrared detection method
  • ISO 7625:1983 Sintered metal materials, excluding hardmetals; Preparation of samples for chemical analysis for determination of carbon content
  • ISO 3690:2000 Welding and allied processes - Determination of hydrogen content in ferritic steel arc weld metal
  • ISO 3690:2018 Welding and allied processes - Determination of hydrogen content in arc weld metal
  • ISO 7625:2006 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
  • ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
  • ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
  • ISO 14577-4:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
  • ISO 9918:1993 Capnometers for use with humans; requirements
  • ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
  • ISO 3690:2012 Welding and allied processes - Determination of hydrogen content in arc weld metal

IT-UNI, Metal Carbon Meter

German Institute for Standardization, Metal Carbon Meter

  • DIN 43080:1968 Intermediate metal sheets for carbon-brush-holders
  • DIN 12893:1976 Metal laboratory ware; stand rods
  • DIN V 65579:1991 Aerospace; carbon fibres; chemical analysis; determination of the metalloid elements
  • DIN 12894:1997 Metal laboratory ware - Clamps
  • DIN 12895-2:1978 Metal laboratory ware; hook connector
  • DIN 50158-1:2008 Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 1: Test method
  • DIN 50157-1:2008 Metallic materials - Hardness testing with portable measuring instruments operating with mechanical penetration depth - Part 1: Test method

AIA/NAS - Aerospace Industries Association of America Inc., Metal Carbon Meter

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Metal Carbon Meter

  • GB/T 10304.11-1988 Determination of heavy metals in cathode carbonate
  • GB/T 12690.13-1990 Neodymium and samarium--Determination of carbon content--High frequency--Infrared absorption method
  • GB/T 19780-2005 Capacity calibration of spherical metal tank-Total station external measuring method
  • GB/T 11378-2005 Metallic coatings.Measurement of coating thickness.Profilometric method
  • GB/T 22935-2008 Metal-halide lamps for projecting apparatus
  • GB/T 8654.8-1988 Methods for chemical analysis of manganese metal--The infrared absorption method for the determination of carbon content
  • GB/T 4702.14-1988 Methods for chemical analysis of chromium metal--The infrared absorption method for the determination of carbon content
  • GB 4702.14-1988 Metal Chromium Chemical Analysis Method Infrared Absorption Method Determination of Carbon Content
  • GB/T 8360-1987 The lattice constant determination of metals--Method of X-ray diffractometer
  • GB/T 26836-2011 Non-destructive testing instruments.Specification for metal ceramic X-ray tube
  • GB/T 30733-2014 Determination of total carbon, hydrogen and nitrogen content in coal.Instrumental method
  • GB/T 6276.9-1986 Ammonium hydrogen carbonate for industrial use--Determination of heavy metal content--Visible turbidimetric method

Professional Standard - Textile, Metal Carbon Meter

  • FZ/T 50060-2022 Carbon Fiber Alkali Metal and Alkaline Earth Metal Content Test Method

National Metrological Technical Specifications of the People's Republic of China, Metal Carbon Meter

  • JJF 1090-2002 Calibration Specification for Nonmetal Building Materials Plastic Measuring Instruments
  • JJF 2037-2023
  • JJF 1721-2018 Calibration Specification for Carbonization Depth Measuring Instruments and Calipers
  • JJF 1565-2016 Calibration specification for heavy metal water quality online analyzer

European Committee for Standardization (CEN), Metal Carbon Meter

  • EN 24505:1993 Hardmetals - Metallographic Determination of Porosity and Uncombined Carbon
  • EN 23907:1993 Hardmetals - Determination of Total Carbon Content - Gravimetric Method (ISO 3907 : 1985)
  • EN ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012)
  • EN ISO 376:2002 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines ISO 376: 1999; Supersedes EN 10002-3: 1994
  • prEN 499-1991 Classification of covered electrodes for manual metal arc welding of carbon steels, carbon-manganese steels and micro alloyed steels
  • EN ISO 4518:2021 Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:2021)
  • CEN EN 13523-3-2001 Coil Coated Metals - Test Methods - Part 3: Colour Difference - Instrumental Comparison

YU-JUS, Metal Carbon Meter

  • JUS C.A4.055-1987 Mechanical testing of meta/s. Determination of apparent hardness ofs/nteres metal materials, excluding hardmeta/s. Case-hardened ferrous materials, surface enriched bycarbon orcarbon and nitrogen
  • JUS C.A6.037-1991 Metali1c coatings. heasurement of coatlng tbickness. Profilometrlc metbo?
  • JUS C.A2.052-1987 Metals tests. Determination of the effective depth ofcarburized and hardened cases ofsteels
  • JUS C.N2.005-1988 Powder metallurgy. Sintered metal materials, excluding hardmetals. PrepaPowder metallurgy. Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content

(U.S.) Ford Automotive Standards, Metal Carbon Meter

  • FORD FLTM EU-BA 054-01-2000 METAL FOIL METHOD FOR DETERMINATION OF C- AND N-POTENTIAL OF CARBURIZING AND CARBONITRIDING FURNACE ATMOSPHERES
  • FORD FLTM EU-BA 054-1-2000 METAL FOIL METHOD FOR DETERMINATION OF C- AND N-POTENTIAL OF CARBURIZING AND CARBONITRIDING FURNACE ATMOSPHERES

Society of Automotive Engineers (SAE), Metal Carbon Meter

SAE - SAE International, Metal Carbon Meter

British Standards Institution (BSI), Metal Carbon Meter

  • BS EN ISO 4518:1980 Metallic coatings - Measurement of coating thickness - Profilometric method
  • BS EN ISO 14577-4:2007 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
  • BS ISO 11873:2005 Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders - Infrared detection method
  • BS EN ISO 7625:2007 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
  • BS EN ISO 7625:2012 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
  • BS EN ISO 14577-4:2016 Tracked Changes. Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
  • BS EN ISO 14577-3:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
  • BS EN ISO 14577-3:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
  • BS ISO 2804:1996 Wire, bar or tube drawing dies - As-sintered pellets of hardmetal (carbide) - Dimensions
  • BS ISO 2804:1997 Wire, bar or tube drawing dies. As-sintered pellets of hardmetal (carbide). Dimensions
  • BS EN ISO 14577-2:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
  • BS EN ISO 376:2004 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
  • BS EN ISO 376:2011 Metallic materials. Calibration of force-proving instruments used for the verification of uniaxial testing machines
  • BS EN ISO 1797-1:2011 Dentistry. Shanks for rotary instruments. Shanks made of metals
  • BS EN ISO 4499-4:2016 Hardmetals. Metallographic determination of microstructure. Characterisation of porosity, carbon defects and eta-phase content

KR-KS, Metal Carbon Meter

  • KS D ISO 11873-2021 Hardmetals — Determination of sulfur and carbon contents in cobalt metal powders — Infrared detection method

Association of German Mechanical Engineers, Metal Carbon Meter

  • VDI 2576-2010 Emission control - Carbothermic and metallothermic production of ferroalloys and silicon metal

Taiwan Provincial Standard of the People's Republic of China, Metal Carbon Meter

  • CNS 8004-1981 Methods of Chemical Analysis for Carbon in Manganese Metal
  • CNS 11070-1984 General Rules of Determination for Carbon in Metallic Materials
  • CNS 8403-1982 Methods of Chemical Analysis for Chromium and Carbon in Chromium Metal
  • CNS 8284-1982 Method of Chemical Analysis for Carbon in Metallic Silicon (Electric Method)
  • CNS 8283-1982 Method of Chemical Analysis for Carbon in Metallic Silicon (Conductivity Method)

Group Standards of the People's Republic of China, Metal Carbon Meter

Shandong Provincial Standard of the People's Republic of China, Metal Carbon Meter

  • DB37/T 2479-2014 Technical conditions for automatic online heavy metal monitor in water quality

Professional Standard - Electricity, Metal Carbon Meter

  • DL/T 1273-2013 Photoelectric type (CCD) Remote Reading Bimetal Benchmark Station

Professional Standard - Aviation, Metal Carbon Meter

Professional Standard - Military and Civilian Products, Metal Carbon Meter

  • WJ 461-1995 Metal coating. Specifications for ferrous metal oxidizing coatings of optical instrument
  • WJ 464-1995 Metal coating. Specifications for ferrous metal phosphate coating coatings of optical instrument
  • WJ 1855-1989 Gold electroplating for metal cladding optical instruments
  • WJ 467-1995 Metal and non-metal coatings Pre-painting surface preparation for optical instrument
  • WJ 2016-1991 Metallic and non-metallic coatings Stainless steel passivation film for military optical instruments
  • WJ 651-1995 Specification for non-ferrous alloy metal mold castings for optical instruments
  • WJ 2015-1991 Aluminum and aluminum alloy chemical conversion coatings for metal and non-metal coatings for military optical instruments
  • WJ 2298-1995 CS-244/344 Carbon and Sulfur Meter Verification Regulations

Professional Standard - Tobacco, Metal Carbon Meter

  • YC/T 90.2-1996 Tobacco Machinery Metal Detectors Part 2: Specifications
  • YC/T 90.1-1996 Tobacco Machinery Metal Detector Part 1: Types and Basic Parameters

AASHTO - American Association of State Highway and Transportation Officials, Metal Carbon Meter

  • M 280-2003 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
  • M 280-2014 Standard Specification for Metallic-Coated (Carbon) Steel Barbed Wire
  • M 280-2009 Standard Specification for Metallic-Coated (Carbon) Steel Barbed Wire
  • TP 65-2003 Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers
  • T 337-2009 Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers

Professional Standard - Ferrous Metallurgy, Metal Carbon Meter

  • YB/T 023-1992 Carbon steel cold-rolled strip for metal hose
  • YB/T 5337-2006 Determination method of metal lattice constant X-ray diffractometer method

工业和信息化部, Metal Carbon Meter

  • JC/T 2605-2021 Fluorocarbon coated metal plate for building decoration

Military Standard of the People's Republic of China-General Armament Department, Metal Carbon Meter

  • GJB 2845-1997 Specification for carbon fiber woven fabrics with wire

BR-ABNT, Metal Carbon Meter

Hunan Provincial Standard of the People's Republic of China, Metal Carbon Meter

Professional Standard - Customs, Metal Carbon Meter

  • HS/T 29-2010 Quantitative analysis of the content of carbon in carbon fiber method by high frequency infrared carbon sulphur analyzer

The American Road & Transportation Builders Association, Metal Carbon Meter

  • AASHTO TP 65-2003 Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers
  • AASHTO M 280-2014 Standard Specification for Metallic-Coated (Carbon) Steel Barbed Wire

PT-IPQ, Metal Carbon Meter

  • NP 3304-1988 Small tools Hardmetal heading dies. Terminology

Professional Standard - Petroleum, Metal Carbon Meter

  • SY/T 6842-2011 Through-tube carbon/oxygen logging tool
  • SY 6842-2011 Through-tubing carbon-oxygen ratio energy spectrum logging tool
  • SY/T 6368-1998 Detector on buried metal pipelines anti-corrosion coating faults
  • SY 6368-1998 Underground metal pipeline anti-corrosion layer leak detector
  • SY/T 5693-2008 Specification for calibration of the C/O spectrum logging tool
  • SY 5693-2008 Calibration specification for carbon-oxygen ratio energy spectrum logging tool

煤炭工业部, Metal Carbon Meter

  • MT 228-1990 Technical conditions of carbon and hydrogen analyzer in coal

国家煤矿安全监察局, Metal Carbon Meter

  • MT/T 1195-2020 Calibration procedures for carbon and hydrogen analyzers in coal

American National Standards Institute （ANSI), Metal Carbon Meter

Professional Standard - Geology, Metal Carbon Meter

  • DZ/T 0101.9-1994 Geological instruments and meters manufacturing time quota non-ferrous metal casting

Professional Standard-Ships, Metal Carbon Meter

  • CB 1085.1-1989 Non-ferrous metal sand casting with man-hour quota for instrumentation manufacturing

CEN - European Committee for Standardization, Metal Carbon Meter

  • EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines

Standard Association of Australia （SAA）, Metal Carbon Meter

  • AS/NZS 1553.1:1995 Covered electrodes for welding Part 1: Low carbon steel electrodes for manual metal-arc welding of carbon steels and carbon-manganese steels
  • AS 2003:1991 Carbon and low alloy steel - Measurement of decarburization

Professional Standard - Light Industry, Metal Carbon Meter

AWS - American Welding Society, Metal Carbon Meter

  • A5.1/A5.1M-2004 Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding
  • A5.1-1978 Specification for Carbon Steel Electrodes for Shielded Metal ArcWelding
  • A5.1-1991 Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding

AENOR, Metal Carbon Meter

国家市场监督管理总局、中国国家标准化管理委员会, Metal Carbon Meter

  • GB/T 13634-2019 Metallic materials—Calibration of force-proving instruments used for the verification of uniaxial testing machines

ZA-SANS, Metal Carbon Meter

  • SANS 4518:1980 Metallic coatings - Measurement of coating thickness - Profilometric method

未注明发布机构, Metal Carbon Meter

  • BS 3146-1:1974(1999) Specification for Investment castings in metal — Part 1 : Carbon and low alloy steels

GOSTR, Metal Carbon Meter

Professional Standard - Electron, Metal Carbon Meter

  • SJ/T 11171-1998 Specification for single and double sided carbon-coated printed boards without interlayer connection

Professional Standard - Railway, Metal Carbon Meter

  • TB/T 1842.2-2002 Steeped metal carbon slider for electric locomotive power collector slider

  carbon meter, metal detector, metal detector, Metal Nitrogen Meter, UV carbon meter, How to measure carbon in metal, Portable Metal Carbon Meter, Metal Carbon Meter.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved