ZH
RU
ES

Cerium ion detection method

Cerium ion detection method, Total:499 items.

In the international standard classification, Cerium ion detection method involves: Non-ferrous metals, Testing of metals, Non-metalliferous minerals, Galvanic cells and batteries, Analytical chemistry, Ferrous metals, Water quality, Construction materials, Products of the textile industry, Metalliferous minerals, Products of the chemical industry, Mining equipment, Powder metallurgy, Optics and optical measurements, Fertilizers, Wastes, Electric road vehicles, Road engineering, Test conditions and procedures in general, Power stations in general, Air quality, Plastics, Vacuum technology, Metrology and measurement in general, Insulating materials, Sugar. Sugar products. Starch, Semiconducting materials, Leather technology, Soil quality. Pedology, Electronic display devices, Pulps, Paper and board, Non-destructive testing, Biology. Botany. Zoology, Spices and condiments. Food additives, Environmental protection, Sterilization and disinfection, Organic chemicals, Fuels, Beverages, Geology. Meteorology. Hydrology, Electronic tubes, Products of non-ferrous metals, Information sciences. Publishing, Protection against crime, Veterinary medicine, Laboratory medicine, Pesticides and other agrochemicals, Adhesives, Optoelectronics. Laser equipment, Photography, Meat, meat products and other animal produce, Industrial furnaces, Measurement of volume, mass, density, viscosity, Production in the chemical industry, Inorganic chemicals, Energy and heat transfer engineering in general, Equipment for the chemical industry, Rubber and plastics products, Raw materials for rubber and plastics, General methods of tests and analysis for food products, Fruits. Vegetables, Road vehicles in general, Animal feeding stuffs, Audio, video and audiovisual engineering, Semiconductor devices, Services, Electronic components in general, Tea. Coffee. Cocoa, Ceramics, Commercial vehicles, Reinforced plastics, Fuel cells, Crude petroleum, Road vehicle systems, Electricity. Magnetism. Electrical and magnetic measurements, Nuclear energy engineering, Terminology (principles and coordination).

Professional Standard - Rare Earth, Cerium ion detection method

XB/T 613.1-2010 Chemical analysis methods of cerium-terbium oxide.Part 1:Determination of cerium oxide and terbium oxide contents.Inductively coupled plasma atomic emission spectrometry
XB/T 618.2-2015 Chemical analysis methods of neodymium-magnesium alloy.Part 2:Determination of lanthanum,cerium,praseodymium,samarium,europium,gadolinium,terbium,dysprosium,holmium,erbium,thulium,ytterbium,lutetium and yttrium contents.Inductively coupled plasma atomic e
XB/T 619-2015 Chemical analysis methods of ion type rare earth ore.Determination of total rare earth ion phase
XB/T 620.3-2015 Chemical Analysis Methods of Waste Rare Earth Phosphor Powder Part 3: Determination of Yttrium Oxide, Lanthanum Oxide, Cerium Oxide, Europium Oxide, Gadolinium Oxide, Terbium Oxide, Dysprosium Oxide by Inductively Coupled Plasma Atomic Emission Spectromet

American Society for Testing and Materials (ASTM), Cerium ion detection method

ASTM E1277-96 Standard Test Method for Chemical Analysis of Zinc-5% Aluminum-Mischmetal Alloys by ICP Emission Spectrometry
ASTM D8234-19 Standard Test Method for Anions in High Ionic Water by Ion Chromatography using Tandem Suppressed Conductivity and UV Detection
ASTM D3049-89(2003) Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration
ASTM D1179-99 Standard Test Methods for Fluoride Ion in Water
ASTM D4327-17 Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography
ASTM D4327-11 Standard Test Method for Anions in Water by Suppressed Ion Chromatography
ASTM D5542-04 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D4548-91(1996) Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins
ASTM D4548-11(2019) Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins
ASTM D511-03 Standard Test Methods for Calcium and Magnesium In Water
ASTM D512-89(1999) Standard Test Methods for Chloride Ion In Water
ASTM D7359-14 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection &40;Combustion Ion Chromatography-CIC&41;
ASTM D7994-17 Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatograp
ASTM D5996-05(2009) Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
ASTM D5542-94(1999)e1 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D5542-16 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D5996-05 Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
ASTM D7359-08 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM D7359-13 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection lpar;Combustion Ion Chromatography-CICrpar;
ASTM D7359-23 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion
ASTM D516-02 Standard Test Method for Sulfate Ion in Water
ASTM D516-90(1995)e1 Standard Test Method for Sulfate Ion in Water
ASTM D1583-01(2008) Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D1246-16 Standard Test Method for Bromide Ion in Water
ASTM D1179-04 Standard Test Methods for Fluoride Ion in Water
ASTM D4658-08 Standard Test Method for Sulfide Ion in Water
ASTM D3561-11 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
ASTM D3561-16 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
ASTM D5996-16 Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
ASTM D7359-14a Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM D7359-18 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion
ASTM D6919-17 Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
ASTM D5599-22 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM D512-04 Standard Test Methods for Chloride Ion In Water
ASTM D512-10 Standard Test Methods for Chloride Ion In Water
ASTM D1179-16 Standard Test Methods for Fluoride Ion in Water
ASTM D512-12 Standard Test Methods for Chloride Ion In Water
ASTM D8150-17 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
ASTM D7423-09 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
ASTM D5599-15 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM D5996-96(2000) Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
ASTM D6919-03 Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
ASTM D6919-09 Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
ASTM D5827-09(2015) Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D2024-09(2023) Standard Test Method for Cloud Point of Nonionic Surfactants
ASTM E2371-21 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
ASTM E2371-21a Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
ASTM D4519-94(2005) Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
ASTM D4519-16 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
ASTM D7423-09(2014) Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
ASTM D7423-16 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
ASTM C1432-03 Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
ASTM C1432-99 Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
ASTM C1432-03(2008) Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
ASTM C1432-15 Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
ASTM D7131-05 Standard Test Method for Determination of Ion Exchange Capacity (IEC) in Grafted Battery Separator
ASTM D4519-94(1999)e1 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity

Professional Standard - Geology, Cerium ion detection method

DZ/T 0064.51-1993 Groundwater quality testing methods - Determination of chloride, fluoride, bromide, nitrate and sulfate by ion chromatography
DZ/T 0279.33-2016 Analytical methods of regional geochemical samples Part 33: Determination of lanthanum, cerium and other 15 rare earth elements Alkali fusion-ion exchange-inductively coupled plasma atomic emission spectrometry
DZ/T 0064.28-1993 Groundwater quality testing methods - Determination of potassium, sodium, lithium and ammonium by ion chromatography
DZ/T 0064.54-1993 Groundwater Quality Examination Method Determination of Fluoride by Ion Selective Electrode
DZ/T 0064.57-1993 Groundwater quality testing method Nessler's reagent colorimetric method for the determination of ammonium ions
DZ/T 0064.42-1993 Groundwater Quality Inspection Method Determination of Strontium and Barium by Inductively Coupled Plasma Atomic Emission Spectrometry
DZ/T 0064.11-1993 Groundwater quality testing method Determination of arsenic by gas-liquid separation hydride atomic fluorescence method
DZ/T 0064.80-1993 Determination of 39 elements such as lithium by plasma mass spectrometry
DZ/T 0279.32-2016 Analytical methods of regional geochemical samples Part 32: Determination of 15 rare earth elements such as lanthanum and cerium in closed acid solution-inductively coupled plasma mass spectrometry
DZ/T 0064.47-1993 Groundwater Quality Testing Method Titration Determination of Free Carbon Dioxide
DZ/T 0064.22-1993 Groundwater quality inspection method Determination of copper, lead, zinc, cadmium, manganese, chromium, nickel, cobalt, vanadium, tin, beryllium and titanium by inductively coupled plasma atomic emission spectrometry
DZ/T 0064.38-1993 Determination of Selenium by Atomic Fluorescence Spectrometry

Group Standards of the People's Republic of China, Cerium ion detection method

T/MBJX 0004-2020 State of Charge Detection Method for Lithium-ion Power Batteries
T/CBMCA 031-2022 On-site detection method of negative ion functional building materials
T/GDCKCJH 068-2022 Performance requirements and test methods for electrostatic eliminator of ion fan
T/GERS 0001-2020 Test method of critical control points in the production of lithium-ion traction battery
T/LFX 005-2023 Rapid detection method of chloride ion in inorganic fertilizer
T/ATCRR 06-2019 Echelon used lithium ion battery—Test method
T/CI 035-2022 Calibration method of magnification of X-ray detection equipment for lithium ion battery
T/CAIA YQ006-2018 Performance testing method of Ion chromatography
T/QGCML 2048-2023
T/FDSA 003-2019 Test method of the process challenge device（PCD）during low-temperature plasma of hydrogen peroxide
T/CI 002-2021 The index and test method of artificial generation of negative oxygen ion products
T/CEC 171-2018 Lithium-ion battery cycle life requirements and rapid detection test methods for power energy storage
T/CVIA 3-2008 Measurement method of color viewing angle of plasma TV receiver
T/CASAS 010-2019 Determination of Trace Impurities Concentration and Distribution in GaN Materials by Secondary Ion Mass Spectrometry
T/CI 038-2021 The test method of mean specific heat capacity for lithium ion battery cell
T/XYMES 001-2020 48V lithium-ion start-stop battery pack and system test method
T/ZZAS 001-2018 Test method for electrical performance of high power lithium-ion battery
T/CASME 809-2023 Safety requirements and test methods for lithium-ion battery modules
T/CSAE 283-2022 Off-line detection method of intelligent connected automobile vision sensor
T/CPCIF 0249-2023 Determination of N-methyldiethanolamine in industrial circulating water—Ion chromatography
T/CMA JD022-2020 Detection Method of Electronic Snatching System of Black Smoke Vehicle
T/CEC 169-2018 Internal short circuit test method of lithium ion battery for electric energy storage
T/CASAS 009-2019 Determination of Trace Impurities Concentration and Distribution in Semi-insulating SiC Materials by Secondary Ion Mass Spectrometry
T/GZTPA 0010-2021 Gas Chromatography Hydrogen Flame Ionization Method for Detection of Soluble Sugar in Guizhou Tea
T/SZTIC 002-2021 Rapid detection of illegal additives in health food by direct ionization miniature mass spectrometry

Japanese Industrial Standards Committee (JISC), Cerium ion detection method

JIS K 0556:1995 Testing methods for determination of anions in highly purified water
JIS B 9929:2006 Standard for measuring methods of airborne ion density
JIS K 0102-2:2022 Testing methods for industrial water and industrial wastewater -- Part 2: Inorganic anions, ammonium ion, organic nitrogen, total nitrogen and total phosphorus
JIS K 0170-8:2011 Testing methods for water quality by flow analysis -- Part 8: Anionic surfactants
JIS K 0170-8:2019 Testing methods for water quality by flow analysis -- Part 8: Anionic surfactants
JIS R 1661:2004 Method for conductivity measurement of ion-conductive fine ceramics

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Cerium ion detection method

GB/T 32548-2016 Steel and iron.Determination of tin, antimony, cerium, lead and bismuth.Inductively coupled plasma mass spectrometric method
GB/T 42272-2022 The method for determining the chloride diffusion coefficient for cement mortar
GB/T 17593-1998 Textiles--Test method of heavy metal ions--Atomic absorption spectrophotometry
GB/T 20975.27-2018 Methods for chemical analysis of aluminium and aluminium alloys.Part 27:Determination of cerium, lanthanum, scandium.Inductively coupled plasma atomic emission spectrometry method
GB/T 15072.13-2008 Test method of precious metal alloys.Determination of tin,cerium and lanthanium contents for silver alloys.Inductively coupled clasma atomic emission spectrometry
GB/T 223.92-2023 Determination of lanthanum, cerium, praseodymium, neodymium and samarium content in steel and alloys by inductively coupled plasma mass spectrometry
GB/T 24520-2009 Cast iron and low alloy steel-Determination of lanthanum,cerium and magnesium content-Inductively coupled plasma atomic emission spectrometric method
GB/T 11446.7-2013 Test method for trace anion in electronic grade water by ion chromatography
GB/T 223.33-1994 Methods for chemical analysis of iron,steel and alloy. The chlorophosphonazo mA photometric method for the determination of cerium content after extraction separation
GB 223.33-1984 Methods for chemical analysis of iron,steel and alloy--The chlorophosphonazo mA photometric method for the determination of cerium content after extraction separation
GB/T 11446.7-1997 Test method for trace chloride, nitrate, phosphate, sulfate in electronic grade water by ion-chromatography
GB/T 38514-2020 Test methods for electrodeionization stacks
GB/T 12689.12-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of lead,cadmium,iron,copper,tin,aluminium,arsenic,stibium,magnesium lanthanum and cerium contents-The inductively coupled plasma-optical emission spectrometric method
GB/T 12007.2-1989 Epoxide resins--Determination of sodium ion
GB 12007.2-1989 Method for Determination of Sodium Ion in Epoxy Resin
GB/T 38514-2020(英文版) Test methods for electrodeionization stacks
GB/T 32193-2015 Standard practice for testing flame ionization detectors used in gas or supercritical fluid chromatography
GB/T 24580-2009 Test method for measuring Boron contamination in heavily doped n-type silicon substrates by secondary ion mass spectrometry
GB/T 14571.5-2016 Test Methods for Ethylene Glycols for Industrial Use Part 5: Determination of Chloride Ion Chromatography
GB/T 24575-2009 Test method for measuring surface sodium, aluminum, potassium, and iron on silicon and epi substrates by secondary ion mass spectrometry
GB/T 5757-2008 Determination of moisture holding capacity of ion exchange resins
GB/T 28628-2012 Test method for air ion concentration of materials
GB/T 5757-1986 Determination for water retention capacity of ion exchange resins
GB/T 3789.7-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of anode ion current
GB/T 8757-1988 Determination of carrier concentration in gallium arsenide by the plasma resonance minimum
GB/T 27581-2011 Electromagnetic interference shielding film.Electroless copper plating solution.Method of determining concentration of Ni and Cu
GB/T 19940-2005 Chrome powder.Determination of chromium(VI)
GB/T 3776.2-1983 Method of hydrogen ion concentration determination for pesticide emulsifiers
GB/T 8331-1987 Method for the determination of bulk density for ion exchange resins in wet state
GB/T 11483-1989 Methods of measurement for AC plasma display devices
GB/T 8330-2008 Determination of specific gravity of ion exchange resins in wet state
GB/T 8331-2008 Determination of bulk density of ion exchange resins in wet state
GB/T 8330-1987 Method for the determination of true density of ion exchange resins in wet state
GB/T 8757-2006 Determination of carrier concentration in gallium arsenide by the plasma resonance minimum
GB/T 23273.6-2009 Methods for chemical analysis of cobalt oxalate.Part 6:Determination of chlorine ion content.Ion selective electrode method
GB/T 11733-1989 Standard method for hygienic examination of inorganic sulfate in air of residential areas--Ion chromatographly
GB/T 41704-2022 Test methods of cathode materials for lithium ion battery—Determination of magnetic impurities content and residual alkali content
GB/T 11991-1989 Ion exchange resins--Determination for swelling upon complete conversion
GB/T 8144-1987 Determination method for exchange capacity of cation exchange resins
GB/T 8144-2008 Determination of exchange capacity of cation exchange resin
GB/T 11991-2008 Determination of reversible swelling of exchange resins
GB/T 223.38-1985 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-gravimetric method for the determination of niobium content
GB 223.38-1985 Chemical analysis method of iron, steel and alloy Ion exchange separation gravimetric method for determination of niobium content
GB/T 15075-1994 Method for testing EPMA instrument
GB/T 32650-2016 Determining the content of trace elements in arenaceous quartz by inductively coupled plasma mass spectrometry (ICP-MS)
GB/T 12690.1-1990 Lanthanum oxide--Determination of cerium oxide, praseodymium oxide, nedeodynium oxide, samarium oxide and yttrium oxide--Induetively coupled plasma atomic emission spectrographic method
GB/T 13025.7-1999 General test method in salt industry--Determination of iodide ion
GB/T 13025.5-1991 General test method in salt industry--Determination of chloride ion
GB/T 13025.11-1994 General test method in salt industry-Determination of fluorine
GB/T 13025.13-1994 General test method in salt industry- Determination of arsenic ion
GB/T 13025.5-2012 General test method in salt industry.Determination of chloride ion
GB/T 30296-2013 Perfluorinated ion-exchange membrane for chlor-alkali industry.Test method
GB/T 13025.12-1994 General test method in salf industry-Determination of barium ion
GB/T 8220.7-1998 Methods for chemical analysis of bismuth--Determination of arsenic content--Ion exchange separation-hydride generation-flame atomic absorption spectrophtometric method
GB/T 17417.1-1998 Method for chemical analysis of rare earth ores--Determination of separated rare earth content--Preconcentration and separation by cation exchange resin, ICP-AES method
GB/T 15399-1994 Determination of sulfur amino acids in feedstuffs--Ion exchange chromatography
GB/T 10267.1-1988 Method for analysis of calcium metal--The determination of chlorine content by chloride--Selective electrode
GB/T 13025.9-1991 General test method in salt industry--Determination of lead ion (photometry)
GB 10267.1-1988 Analytical method for calcium metal Determination of chlorine by chloride ion selective electrode method
GB/T 5759-2000 Determination for water retention capacity of anion exchange resins in hydroxylic form
GB/T 19860-2005 Determination for hydrogen form of weak acid cation exchange resins
GB/T 6730.28-1986 Methods for chemical analysis of iron ores--The ion-selective electrode method for the determination of fluorine content
GB/T 8151.9-1987 Methods for chemical analysis of zinc concentrates--The ion selective electrode method for the determination of fluorine content
GB/T 18962-2003 General test method in salt industry--Determination of lead lon(AAS)
GB/T 20675-2006 General test method in salt industry Determination of copper ion (AAS)
GB/T 32207-2015 Standard practice for use of electron-capture detectors in gas chromatography

PL-PKN, Cerium ion detection method

PN C04860-01-1990 ?on exchange resin Testing methods Introduction
PN C04860-02-1990 ?on exchange resins Testing methods Sampling
PN C04860-12-1991 Ion exchange resins. Testing methods. Determination of the operating exchange capacity of cation exchange resins in hydrogen ion exchange
PN C04860-11-1991 Ion exchange resins. Testing methods. Determination of the total strongly basic and weakly basic anion exchage resins
PN C04860-10-1991 Ion exchange resins. Testing methods. Determination of the total strong acidic and weak acidic exchange capacitias of cationites
PN C04860-05-1991 ?on exchange resins Testing methods Determination of granulometric composition (mesh analysis)
PN C04860-04-1990 ?on exchange resins Testing methods Column for determination of exchange ' capacities under dynamie conditions
PN C04860-03-1990 ?on exchange resins Testing methods Samples preparation
PN C89085-14-1992 Epoxy resins Methods of testing Determination of ionic chlorine content
PN C04834-1986 Non-ionic surface active agents Determination of polyethylene glycols and non-ionic active matter Weibull method
PN-EN 17246-2019-12 P Fertilizers--Determination of perchlorate in mineral fertilizers by ion chromatography and conductivity detection (IC-CD)
PN P04991-1989 Methods of chemical tests Knitted medical articles Determination of heavy metals jons

Professional Standard - Commodity Inspection, Cerium ion detection method

SN/T 0736.14-2011 Test method of import and export fertilizers.part 14:Determination of trace inorganic anions by ion chromatography method
SN/T 2918-2011 Determination of sulfite in food for export.Ion chromatography method
SN/T 2011-2007 Electronic (capacitive) testing method for raw silk
SN/T 0736.10-1999 Chemical analysis of fertilizers for import and export.Determination of free acid content
SN/T 2784-2011 Detection method of free ammonia in imported phenolic plastics
SN/T 1580-2005 Detection for Coconut Cadang-Cadang Viroid(CCCVd)
SN/T 0448-2011 Determination of arsenic,lead,mercury,cadmium in foodstuffs.ICP-MS method
SN/T 2703-2010 Examination methods for Coccidioides immitis at entry-exit port
SN/T 1414.3-2015 Safety inspection method of secondary cells and batteries for import and export.Part 3:Secondary lithium cells
SN/T 1414.3-2004 Safety inspection of import and export secodary cells and batteries--Part 3: Secondary lithium cells
SN/T 2558.2-2011 Import and Export Functional Textile Inspection Method Part 2: Negative Ion Content
SN/T 1579-2005 Determination of coconut lethal yellowing phytoplasma
SN/T 0736.12-2009 Chemical analysis of fertilizers for import and export.Determination of arsenic,chromium,cadimium,mercury and lead.Inductively coupled plasma mass spectrometry(ICP-MS)
SN/T 2288-2009 Determination of beryllium,cadmium,thallium,chromium,arsenic,tellurium,neodymium and lead in cosmetics for import and export.ICP-MS method
SN/T 1566-2005 Determination of down content of washed feather and down-Down testing instrumentation
SN/T 3541-2013 Determination of multiple ether herbicides sesidues in foods for export.GC-MS/NCI method
SN/T 2143-2008 Determination of Cryptosporidium in food for import and export.PCR method

工业和信息化部, Cerium ion detection method

XB/T 623.2-2018 Methods for chemical analysis of ferrocerium alloys Part 1: Determination of rare earth impurity content by inductively coupled plasma atomic emission spectrometry
XB/T 623.1-2018 Methods for chemical analysis of ferrocerium alloys Part 1: Determination of rare earth impurity content by inductively coupled plasma atomic emission spectrometry
YS/T 1380-2020 Chemical analysis methods for rhodium compounds Determination of chloride ion and nitrate ion content Ion chromatography
YS/T 1497-2021 Analysis method for platinum compounds Determination of impurity anion content Ion chromatography
YS/T 1496-2021 Analysis method for palladium compounds Determination of impurity anion content Ion chromatography
HG/T 6107-2022 Determination method of sodium ions in waste sulfuric acid
SJ/T 11794-2022 Test method for free lithium in lithium-ion battery cathode materials
HG/T 6110-2022 Determination method of calcium and magnesium ions in waste sulfuric acid
YS/T 1065.6-2019 Methods for testing the physical and chemical properties of zeolites Part 6: Determination of calcium exchange rate Ion-selective electrode method
HG/T 6108-2022 Determination method of chloride ion content in waste sulfuric acid
YS/T 1462.5-2021 Methods for chemical analysis of crude tin Part 5: Determination of antimony content Flame atomic absorption spectrometry and cerium sulfate titration
YS/T 1569.5-2022 Methods for chemical analysis of lithium nickel manganate Part 5: Determination of chloride ion content Ion selective electrode method
SJ/T 11792-2022 Test method for conductivity of lithium-ion battery electrode materials
YS/T 1345.4-2020 Methods for chemical analysis of bismuth-rich lead Part 4: Determination of antimony content Flame atomic absorption spectrometry and cerium sulfate titration
YS/T 1057.2-2020 Methods for chemical analysis of cobalt tetroxide Part 2: Determination of chloride ion content Ion selective electrode method
YS/T 1115.13-2016 Methods for chemical analysis of copper ores and tailings Part 13: Determination of fluorine content Ion-selective electrode method and ion chromatography
QB/T 5529-2020 Method for detection of water-soluble pyrophosphate and tripolyphosphate in oral hygiene and care products Ion chromatography

Professional Standard - Machinery, Cerium ion detection method

JB/T 9361-1999 Test method for flame ionization detector of gas chromatography
JB/T 2965-1992 Performance testing method of sputtering ion pump
JB/T 9489-1999 Measuring mathod of major parameter for argon ion lasers

Association Francaise de Normalisation, Cerium ion detection method

NF T90-048*NF EN ISO 14911:1999 Water quality - Determination of dissolved Li+, Na+, NH 4+, K+, Mn 2+, Ca 2+, Mg 2+, Sr 2+ and Ba 2+ using ion chromatography - Method for water and waste water.
NF EN ISO 25140:2010 Émissions de sources fixes - Méthode automatique pour la détermination de la concentration en méthane par détection à ionisation de flamme (FID)
NF V18-217*NF EN 17294:2019 Animal feeding stuffs - Methods of sampling and analysis - Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD)
NF EN 17294:2019 Aliments des animaux - Méthodes d'échantillonnage et d'analyse - Dosage des acides organiques par chromatographie ionique avec détection conductimétrique (CI-DC)
NF U42-421/IN1*NF EN 16318/IN1:2016 Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
NF X31-130:1999 Soil quality - Chemical methods - Determination of cationic exchange capacity (CEC) and extractible cations
NF U42-421*NF EN 16318+A1:2016 Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
NF U42-421:2014 Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
NF EN 16318/IN1:2016 Engrais - Dosage des éléments trace - Dosage du chrome (VI) par spectrophotométrie (méthode A) et chromatographie ionique avec détection spectrophotométrique (méthode B)
NF EN 16318+A1:2016 Engrais - Dosage des éléments trace - Dosage du chrome (VI) par spectrophotométrie (méthode A) et chromatographie ionique avec détection spectrophotométrique (méthode B)
NF EN 1787:2022 Produits alimentaires - Détection par spectroscopie RPE d'aliments ionisés contenant de la cellulose
NF T20-057:1981 Produits chimiques à usage industriel - Méthode générale de dosage des ions chlorure - Méthode potentiométrique.
NF X43-353*NF EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID).
NF EN 13708:2022 Produits alimentaires - Détection par spectroscopie RPE d'aliments ionisés contenant des sucres cristallisés
NF EN 1786:1997 Produits alimentaires - Détection d'aliments ionisés contenant des os ou des arêtes - Méthode par spectroscopie RPE.

Professional Standard - Chemical Industry, Cerium ion detection method

HG/T 6107～6110-2022 Determination methods of sodium ions, chloride ion content, chemical oxygen demand (COD) and calcium and magnesium ions in waste sulfuric acid (2022)
HG/T 4588-2014 Peeling test of bonding for plastics pipeline on chemical industry
HG 5-1593-1985 Determination method of aluminum ion in industrial circulating cooling water

German Institute for Standardization, Cerium ion detection method

DIN 38405-1:1985-12 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of chloride ions (D 1)
DIN 54411:2004 Testing of ion exchangers - Recycling method for testing ion exchangers and polymer adsorption resins
DIN 38405-5:1985-01 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of sulfate ions (D 5)
DIN 38405-1:1985 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of chloride ions (D 1)
DIN 38405-5:1985 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of sulfate ions (D 5)
DIN 38405-9:1979 German standard methods for examination of water, waste water and sludge; anions (group D), determination of nitrate ion (D9)
DIN 53345-2:1978 Testing of fat liquors and greases for leather; methods of analysis, determination of ionity
DIN EN 16318:2016-07 Fertilizers and liming materials - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B); German version EN 16318:2013+A1:2016
DIN 38406-11:1991 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of nickel by atomic absorption spectrometry (AAS) (E 11)
DIN 38406-7:1991 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of copper by atomic absorption spectrometry (AAS) (E 7)
DIN 38406-7:1991-09 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of copper by atomic absorption spectrometry (AAS) (E 7)
DIN 38406-11:1991-09 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of nickel by atomic absorption spectrometry (AAS) (E 11)
DIN 38406-24:1993-03 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of cobalt by atomic absorption spectrometry (AAS) (E 24)
DIN 38405-17:1981 German Standard Methods for the Analysis of Water, Waste Water and Sludge; Anions (Group D); Determination of Borate Ions (D 17)
DIN 38406-1:1983 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of iron (E 1)
DIN 38406-2:1983-05 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of manganese (E 2)
DIN 38406-1:1983-05 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of iron (E 1)
DIN 38406-5:1983-10 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of ammonia-nitrogen (E 5)
DIN 38406-2:1983 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of manganese (E 2)
DIN 38406-24:1993 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of cobalt by atomic absorption spectrometry (AAS) (E 24)
DIN EN ISO 25140:2010-12 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010); German version EN ISO 25140:2010
DIN EN 17813:2022-02 Environmental matrices - Halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography detection and complementary determination methods; German and English version prEN 17813:2022 / Note: Date of issue 2022-01-14
DIN 38405-23:1994-10 German standard methods for the examination of water, waste water and sludge - Anions (Group D) - Part 23: Determination of selenium by atomic absorption spectrometry (D 23)
DIN 38406-32:2000-05 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 32: Determination of iron by atomic absorption spectrometry (E 32)
DIN 38406-33:2000-06 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 33: Determination of manganese by atomic absorption spectrometry (E 33)
DIN 38405-32:2000-05 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 32: Determination of antimony by atomic absorption spectrometry (D 32) / Note: To be replaced by DIN ISO 17378-2 (2017-01, t).
DIN 38405-13:1981 German Standard Methods for the Analysis of Water, Waste Water and Sludge; Anions (Group D); Determination of Cyanides (D 13)
DIN 38405-4:1985-07 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of fluoride (D 4)
DIN CEN/TS 16318:2012 Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B); German version CEN/TS 16318:2012
DIN 38405-35:2004-09 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 35: Determination of arsenic - Method by graphite furnace atomic absorption spectrometry (GF-AAS) (D 35)
DIN 38406-6:1998-07 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 6: Determination of lead by atomic absorption spectrometry (AAS) (E 6)
DIN 38405-7:2002-04 German standard methods for examination of water, waste water and sludge - Anions (group D) - Part 7: Determination of cyanides in low polluted water by liquid chromatography of ions or potentiometric titration (D 7)
DIN 38406-5:1983 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of ammonia-nitrogen (E 5)
DIN EN 62813:2015-09 Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics (IEC 62813:2015); German version EN 62813:2015
DIN 38405-21:1990-10 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of dissolved silicate by spectrometry (D 21)
DIN EN 16318:2014 Fertilizers - Determination of trace elements - Determination of chromium (VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B); German version EN 16318:2013
DIN EN 17813:2022 Environmental matrices - Halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography detection and complementary determination methods; German and English version prEN 17813:2022
DIN 38405-17:1981-03 German Standard Methods for the Analysis of Water, Waste Water and Sludge; Anions (Group D); Determination of Borate Ions (D 17)
DIN EN 17246:2018 Fertilizers - Determination of perchlorate in mineral fertilizers by ion chromatography and conductivity detection (IC-CD); German and English version prEN 17246:2018
DIN EN 16318:2016 Fertilizers and liming materials - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B); German version EN 16318:2013+A1:2016
DIN 38406-32:2000 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 32: Determination of iron by atomic absorption spectrometry (E 32)
DIN 38405-32:2000 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 32: Determination of antimony by atomic absorption spectrometry (D 32)
DIN 38405-23:1994 German standard methods for the examination of water, waste water and sludge - Anions (Group D) - Part 23: Determination of selenium by atomic absorption spectrometry (D 23)
DIN 38406-18:1990 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of dissolved silver by atomic absorption spectrometry using electrothermal atomization (E 18)

Professional Standard - Building Materials, Cerium ion detection method

JC/T 1086-2008 The method for determining the chloride diffusion coefficient for cement
JC/T 2110-2012 Indoor air ion concentration test method
JC/T 1016-2006 Testing on negative ion concentration of materials
JC/T 2147-2012 Determination of trace metal elements in high purity alumina by inductively coupled plasma atomic emission spectrometry

RU-GOST R, Cerium ion detection method

GOST 15615-1979 Ion exchange rezins. Method for determination of chlorine ions content
GOST R ISO 16918-1-2013 Steel and iron. Inductively coupled plasma mass spectrometric method. Part 1. Determination of tin, antimony, cerium, lead and bismuth content
GOST 17554-1972 Ion-exchange membranes. Method for determination of water
GOST 6433.6-1984 Electrical insulating materials. Methods for determination of ionic foreign matters by extraction
GOST 12868-1977 Ion-exchange resins. Methods for determination of iron
GOST 26951-1986 Soils. Determination of nitrate byionometric method
GOST 20422-1989 Pulp, paper and board. Methods for determination of chloride-ions and sulphate-ions fraction of total mass
GOST R ISO 25140-2017 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection
GOST R 54352-2011 Food common salt. Determination of a mass fraction of magnesium-ion and calcium-ion by complexonometric method
GOST 25183.9-1982 Photographic gelatine. Method of determination of hydrogen ions concentration
GOST R 54743-2011 Juice products. Determination of free amino acids by ion-exchange chromatography method
GOST 24596.5-2015 Feed phosphates. Method for determination of hydrogen ions activity value
GOST 17338-1988 Jon-exchegers. Method for determination of ocmotic stability
GOST 23268.4-1978 Drinking medicinal, medicinal-table and natural-table mineral waters. Method of determination of sulphate ions
GOST 26425-1985 Soils. Methods for determination of chloride ion in water extract
GOST 26426-1985 Soils. Methods for determination of sulphate ion in water extract
GOST 19785-1988 Cathode-ray tubes for reception. Methods for measurement and control of parameters
GOST 19785-1974 Oscillographic electron-beam tubes. Methods for measurement of basic parameters
GOST R 8.846-2013 State system for ensuring the uniformity of measurements. Air ion composition measurements. Air ionizers and air ion generators. Methods of measuring their parameters
GOST 30828-2002 Anionic surface-active agents. Methods for determination of active matter
GOST 17552-1972 Ion-exchange membranes. Methods for determination of total and equilibrium exchange capacity

Professional Standard - Coal, Cerium ion detection method

MT/T 252-2000 Determination method of potassium ion and sodium ion in coal mine water
MT/T 203-1995 Determination method of calcium ion and magnesium ion in coal mine water
MT 252-1991 Determination method of potassium ion and sodium ion in coal mine water
MT/T 360-2005 Determination of fluorine ion in coal mine water
MT/T 368-2005 Determination of iron ion in coal mine water
MT/T 373-2005 Determination of aluminum ion in coal mine water
MT/T 371-2005 Determination of sulfion in coal mine water
MT/T 892-2000 Determination of iodide ions in coal mine water
MT/T 360-1994 Determination method of fluoride ion in coal mine water
MT/T 368-1994 Determination method of iron ion in coal mine water
MT/T 373-1994 Determination method of aluminum ion in coal mine water
MT/T 201-1995 Determination method of chloride ion in coal mine water
MT/T 202-1995 Determination method of calcium ion in coal mine water
MT/T 254-2000 Determination method of ammonium ion in coal mine water
MT 254-1991 Determination method of ammonium ion in coal mine water
MT/T 372-1994 Determination method of sulfur ion in coal mine water - iodometric method
MT/T 205-1995 Determination method of sulfate ion content in coal-mine water
MT/T 205-2011 Determination of sulphate radical hydronium in coal-mine water
MT/T 253-2000 Determination method of nitrate ion in coal mine water
MT/T 483-1995 Determination method of iron ion in acid water of coal mine
MT/T 485-1995 Determination method of calcium ion in acid water of coal mine
MT/T 481-1995 Determination method of chloride ion in acid water of coal mine
MT/T 484-1995 Determination method of aluminum ion in acid water of coal mine
MT/T 486-1995 Determination method of magnesium ion in acid water of coal mine
MT 253-1991 Determination method of nitrate ion in coal mine water
MT/T 251-2000 Determination method of nitrite ion in coal mine water
MT 251-1991 Determination method of nitrite ion in coal mine water
MT/T 479-1995 Determination method of nitrate ion in acid water of coal mine

Professional Standard - Non-ferrous Metal, Cerium ion detection method

YS/T 904.3-2013 Methods for chemical analysis of iron-chromium-aluminum fiber.Part 3:Determination of silicon、manganese、titanium、copper、lanthanum and cerium content.Inductively coupled plasma atomic emission spectrometry
YS/T 1593.4-2023 Methods for chemical analysis of crude lithium carbonate— Part 4：Determination of anion contents— Ion chromatography
YS/T 1593.3-2023 Methods for chemical analysis of crude lithium carbonate—Part 3：Determination of fluoride ion content—Ion selective electrode method
YS/T 775.4-2011 Methods for chemical analysis of lead anode slime.Part 4:Determination of antimony content.Flame atomic absorption spectrophotometry and cerium sulfate titrimetric method
YS/T 536.7-2006 Bismuth Chemical Analysis Method Ion Exchange Separation-Hydride Generation-Flame Atomic Absorption Spectrometry Determination of Arsenic

RO-ASRO, Cerium ion detection method

STAS 6926/8-1989 Motor vehicles SPEED CHECS MOUNTED RUN DISTANCE Requirements and inspection methods
STAS 10027/2-1987 DETECTION' AND MEASUREMENT BY ELECTRIC MEANS OF IONIZING RADIATIONS ELECTRONIC SUB-ASSEMBLIES Terminology
STAS 6679/20-1986 Metal cutting machine-tools CHECKING METHODS FOR DEVIATION FROM INTERSECTION OF AXES
STAS SR ISO 6227:1996 Chemical products for industrial use - General method for determination of chloride ions - Potentiometric method

YU-JUS, Cerium ion detection method

JUS N.A0.391-1987 Detection and measurement of ionizing radiation by electric means. Terms and definitions.
JUS H.Z1.142-1984 Testing of industrial waters. Detarmination of fluoride by ion selective etectrode
JUS H.Z1.145-1987 Testing of industrial vvaters. Detsrmination content of sodium by ion selective electrode
JUS H.Z1.149-1987 Testing of industrial vvaters. Determination of anionic surfactants. Spectrophotometric method
JUS H.N8.126-1987 Testing of paper and board. Determination ofair permeance (medium range). General method

Guangdong Provincial Standard of the People's Republic of China, Cerium ion detection method

DB4403/T 20-2019 Detection method of electric vehicle on-board lithium-ion power battery system

Liaoning Provincial Standard of the People's Republic of China, Cerium ion detection method

DB21/T 3178-2019 Technical specification for non-destructive testing of chloride ion permeability resistance of highway engineering concrete (PERMIT ion migration method)

Professional Standard - Aviation, Cerium ion detection method

HB 5220.38-1995 Extraction and Separation by Chemical Analysis Method of Superalloy - Determination of Cerium Content by ArsenazoⅢ Absorbance Spectrophotometry
HB 5220.38-2008 Methods for chemical analysis of superalloys. Part 38: Determination of cerium content by extraction separation-arsenazo Ⅲ photometric method
HB 20094.2-2012 Test method for determination of wear metals in operating liquid for aviation.Part 2: Inductively coupled plasma automic emission spectrometry (ICP-AES)

Professional Standard - Electricity, Cerium ion detection method

DL/T 954-2005 Analysis of water and steam in fossil fuel power plant Determination of fluoride, acetate, formate, chloride, nitrite, nitrate, phosphate and sulfate by ion chromatography
DL/T 2056-2019 Ion exchange resin and limestone powder particle size detection method laser diffraction method
DL/T 1077-2018 Method for Determination of Organic Extractables from Ion Exchange Resins

Association of German Mechanical Engineers, Cerium ion detection method

VDI 2466 Blatt 2-2008 Gaseous emission measurement - Measurement of methane - Automatic method - Flame ionisation detector (FID)

Military Standard of the People's Republic of China-General Armament Department, Cerium ion detection method

GJB 9788-2020 Specification for alarms for poison detection using ion migration method
GJB 8126-2013 Measuring methods for plasma display modules
GJB 533.12-1988 Detection methods for 45 components of submarine cabin air. Determination of hydrogen fluoride content. Ion-selective electrode method.
GJB 8781.16-2015 Methods for trace element analysis of superalloys Part 16: Determination of boron, scandium, gallium, silver, indium, tin, antimony, cerium, hafnium, thallium, lead and bismuth by inductively coupled plasma-mass spectrometry
GJB 8465-2015 The methods of ship swaying isolation measure for tracking, telemetering and communication equipment of space-tracking ship
GJB 9749-2020 Communication satellite fault detection, isolation and recovery function test methods

HU-MSZT, Cerium ion detection method

国家市场监督管理总局、中国国家标准化管理委员会, Cerium ion detection method

GB/T 38744-2020 Methods for chemical analysis of synergistic catalysis elements in automotive exhaust catalysis－Determination of cerium, lanthanum, praseodymium, neodymium ,barium and zirconium contents－Inductively coupled plasma atomic emission spectrometry
GB/T 39701-2020 Limit and test method of ammonium ion content in fly ash
GB/T 38944-2020 Non-destructive testing—Testing method of small-angle neutron scattering
GB/T 40307-2021 Non-destructive testing—Test method for texture by neutron diffraction
GB/T 36769-2018 Determination of percent regeneration of cation exchange resins
GB/T 40798-2021 Chemical analysis method of ion-adsorption rare earth ore—Determination of total rare earth contents—Inductively coupled plasma mass spectrometry
GB/T 39285-2020 Method for chemical analysis of palladium compounds—Determination of chlorine content—Ion chromatography
GB/T 40231-2021 Restricted substance in electrical and electronic products—Determination of hexavalent chromium—Ion chromatography method

KR-KS, Cerium ion detection method

KS D ISO 16918-1-2018(2023) Steel and iron — Determination of nine elements by the inductively coupled plasma mass spectrometric method — Part 1:Determination of tin, antimony, cerium, lead and bismuth
KS D ISO 16918-1-2018 Steel and iron — Determination of nine elements by the inductively coupled plasma mass spectrometric method — Part 1:Determination of tin, antimony, cerium, lead and bismuth
KS I ISO 25140-2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS M ISO 6227-2017 Chemical products for industrial use — General method for determination of chloride ions — Potentiometric method

Shandong Provincial Standard of the People's Republic of China, Cerium ion detection method

DB37/T 4201-2020 Rapid Screening and Detection Method for Chloride Ion Content in Cement

Guangxi Provincial Standard of the People's Republic of China, Cerium ion detection method

DB45/T 1152-2015 Ion Chromatography Method for Detection of Sulfite Ion and Phosphate Ion Content in Intermediate Products of Sugar Production Process

Professional Standard - Electron, Cerium ion detection method

SJ/T 31068-1994 Requirements of readiness and methods of inspection and assessment for ion implantation machines
SJ/T 31429-1994 Requirements of readiness and methods of inspection and assessment for plasma cutting machines
SJ/T 31100-1994 Requirements of readiness and methods of inspection and assessment for ion beam etching machines
SJ/T 31457-1994 Requirements of readiness and methods of inspection and assessment for ionized water exchange equipment
SJ/T 31069-1994 Requirements of readiness and methods of inspection and assessment for PRS-801 plasma degumming machines
SJ 3237-1989 Method for determination of trace oxygen in electronic grade Argon--Argon ionization gas chromatography method
SJ 3238-1989 Method for determination of trace Nitrogen in electronic grade Argon--Argon ionization gas chromatography method
SJ/T 10163-1991 Critical frquency mesurement methods for electronic equipments
SJ 3240-1989 Method for determination of trace Methane and hydrogen in electronic grade Argon--Argon ionization gas chromatography method

Korean Agency for Technology and Standards (KATS), Cerium ion detection method

KS D ISO 16918-1:2018 Steel and iron — Determination of nine elements by the inductively coupled plasma mass spectrometric method — Part 1:Determination of tin, antimony, cerium, lead and bismuth
KS I ISO 25140-2012(2017) Stationary source emissions－Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS M 0180-2009 Standard test method for halogen(F, Cl, Br) and sulfur content by oxidative pyrohydrolytic combustion followed by ion chromatography detection (Combustion ion chromatography－CIC)
KS F 2598-2011 Standard test method for distribution of total chloride ion in concrete
KS I ISO 25140:2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS C IEC 60680-2006(2021) The methods of plasma equipment for electroheat applications
KS C 7108-2007(2022) Plasma display panels - Visual quality inspection method of PDP module
KS M 0180-2009(2019) Standard test method for halogen(F, Cl, Br) and sulfur content by oxidative pyrohydrolytic combustion followed by ion chromatography detection (Combustion ion chromatography－CIC)
KS C 7108-2007(2017) Plasma display panels - Visual quality inspection method of PDP module
KS I 3205-2007 Testing methods for determination of anions in highly purified water
KS I 3205-2021 Testing methods for determination of anions in highly purified water
KS C 7109-2007 Plasma display panels－Measuring method of acoustic noise on PDP module
KS C 7109-2007(2017) Plasma display panels－Measuring method of acoustic noise on PDP module
KS C IEC 61988-2-2:2003 Plasma display panels－Part 2－2：Measuring methods－Optoelectrical
KS C IEC 61988-2-1:2003 Plasma display panels－Part 2－1：Measuring methods－Optical
KS C IEC 61988-2-3-2007(2022) Plasma display panels－Part 2－3：Measuring methods－Quality
KS C IEC 61988-2-3-2007(2017) Plasma display panels－Part 2－3：Measuring methods－Quality
KS C IEC 61988-2-2-2003(2018)
KS C IEC 61988-2-1-2003(2018)
KS M ISO 6227:2002 Chemical products for industrial use－General method for determination of chloride ions－Potentiometric method
KS M ISO 6227:2017 Chemical products for industrial use — General method for determination of chloride ions — Potentiometric method
KS M ISO 6227-2017(2022) Chemical products for industrial use — General method for determination of chloride ions — Potentiometric method

Professional Standard - Urban Construction, Cerium ion detection method

CJ 26.12-1991 Municipal sewage water quality inspection method standard fluoride determination ion selective electrode method

UNKNOWN, Cerium ion detection method

GB 20077663-T-604 Flame ionization detector test method for gas chromatography/supercritical fluid chromatography

Professional Standard - Agriculture, Cerium ion detection method

305药典四部-2020 4000 Testing methods for pharmaceutical packaging materials 4004 Determination of peel strength
SN/T 5055.1-2018 Biodiesel Analysis Methods Part 1: Determination of Sodium, Potassium, Calcium and Magnesium Ion Ion Chromatography
GB 3776.2-1983 Method for Determination of Hydrogen Ion Concentration of Pesticide Emulsifier
NY/T 838-2004 Test method of Fluorine in tea - Electrode method for selection of Fluorine ion
GB/T 13025.7-1991 Determination of iodide ion general test method for salt industry
GB 13025.9-1991 Determination of lead ion (photometric method) general test method for salt industry

European Committee for Standardization (CEN), Cerium ion detection method

PD CEN/TS 16318:2012 Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)

VN-TCVN, Cerium ion detection method

TCVN 2315-1978 Reagents.Method for the determination of anions impurities

British Standards Institution (BSI), Cerium ion detection method

BS EN 61988-2-5:2012 Plasma display panels. Measuring methods. Acoustic nois
BS EN 16318:2013+A1:2016 Fertilizers and liming materials. Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
BS EN 61988-2-1:2002 Plasma display panels - Measuring methods - Optical
BS EN 61988-2-2:2003 Plasma display panels - Measuring methods - Optoelectrical
BS EN 61988-2-1:2003 Plasma display panels. Measuring methods. Optical
BS DD ENV 12142:1997 Method for determination of stable hydrogen isotope ratio (2H/1H) of water from fruit juices, using isotope ratio mass spectrometry
BS EN 17294:2019 Animal feeding stuffs. Methods of sampling and analysis. Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD)
BS DD ENV 12140:1997 Method for determination of stable carbon isotope ratio (13C/12C) of sugars from fruit juices, using isotope ratio mass spectrometry
BS DD ENV 12141:1997 Method for determination of stable oxygen isotope ratio (18O/16O) of water from fruit juices, using isotope ratio mass spectrometry
BS 6337-4:1984 General methods of chemical analysis. Method for determination of chloride ions by potentiometry
BS EN 61988-4:2007 Plasma display panels - Climatic and mechanical testing methods
BS EN 61988-2-1:2012 Plasma display panels. Measuring methods. Optical and optoelectrical
BS EN ISO 25140:2010 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
BS 7020-19:1989 Analysis of iron ores. Method for the determination of fluorine content. Ion-selective electrode method
BS 7020-19:1988 Analysis of iron ores. Method for the determination of fluorine content. Ion-selective electrode method

SE-SIS, Cerium ion detection method

SIS SS IEC 692:1984 Nuclear instrumentation — Density meters utilizing ionizing radiation — Definitions and test methods

International Organization for Standardization (ISO), Cerium ion detection method

ISO 16918-1:2009 Steel and iron - Determination of nine elements by the inductively coupled plasma mass spectrometric method - Part 1: Determination of tin, antimony, cerium, lead and bismuth
ISO/TS 22933:2022 Surface chemical analysis — Secondary ion mass spectrometry — Method for the measurement of mass resolution in SIMS

Jiangxi Provincial Standard of the People's Republic of China, Cerium ion detection method

DB36/T 1842-2023 Determination of 16 rare earth elements including lanthanum and cerium in soil and sediments by microwave digestion-inductively coupled plasma mass spectrometry
DB36/T 689-2012 Chemical analysis method of ionic rare earth raw ore Determination of total amount of rare earth in ionic phase EDTA titration method

ES-UNE, Cerium ion detection method

UNE-EN 16318:2015+A1:2016 Fertilizers and liming materials - Determination of chromium (VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
UNE-EN 17294:2020 Animal feeding stuffs - Methods of sampling and analysis - Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Cerium ion detection method

GB/T 35109-2017 Static test method of nitrogen and oxygen separation for molecular sieves
GB/T 33584.1-2017 Seawater quality requirements and analysis method for seawater cooling system—Part 1:Determination of calcium and magnesium
GB/T 35942-2018 Nested PCR method for detection of Cryptosporidium spp.
GB/T 34500.1-2017 Chemical analysis methods for rare earth residue and waste water—Part 1：Determination of fluorine content—Ion selective electrode analysis
GB/T 34641-2017 Non-destructive testing—Test method for determining image quality in direct thermal neutron radiographic examination

ZA-SANS, Cerium ion detection method

SANS 163-1:1992 Water quality - Determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions, using liquid chromatography of ions Part 1: Method for water with low contamination

Danish Standards Foundation, Cerium ion detection method

DS/EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)

CEN - European Committee for Standardization, Cerium ion detection method

PREN 17294-2018 Animal feeding stuffs: Methods of sampling and analysis - Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD)

Professional Standard - Press and Publication, Cerium ion detection method

CY/T 114-2015 Examining method of e-book quality
CY/T 133-2015 Method for Detecting Copyright Information of Electronic Books

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Cerium ion detection method

GJB 5404.16-2005 Analysis methods for trace elements in super alloys - Part 16: Determination of boron, scandium, gallium, silver, indium, tin, antimony, cerium, hafnium, thallium, lead and bismuth contents by inductively coupled plasma-mass spectrometric method
GJB 5969.7-2007 Test methods for microsphere uranium dioxide with coated niobium for submarine nuclear power plant.Part 7: Determination of boracium by methyl alcohol distillation.ion selective electrode method

Indonesia Standards, Cerium ion detection method

SNI 03-6894-2002 Test method for asphalt content from asphalt mixtures by centrifuge

Professional Standard - Public Safety Standards, Cerium ion detection method

GA/T 930-2011 GC and chemistry examination methods for cyanogens ion in biology samples
GA/T 1320-2016 GC-MS examination methods for fluoride ion in urine and blood in forensic science

Jilin Provincial Standard of the People's Republic of China, Cerium ion detection method

DB22/T 2559-2016 Bovine neosporosis detection method LAMP method

Sichuan Provincial Standard of the People's Republic of China, Cerium ion detection method

DB51/T 2004-2015 Ion Chromatography for Detection of Sulfate in High Purity Sodium Hydroxide
DB51/T 1031-2010 Determination method of rare earth in tea - Inductively coupled plasma atomic emission spectrometry

Professional Standard - Hygiene , Cerium ion detection method

WS/T 30-1996 Urine.Determination of fluoride.Ion specifi electrode method

IN-BIS, Cerium ion detection method

IS 7330-1988

Inner Mongolia Provincial Standard of the People's Republic of China, Cerium ion detection method

DB15/T 927-2015 Determination of Lanthanum, Ce, Praseodymium, Neodymium, Zinc, Magnesium, Iron and Silicon in Battery-Grade Mischmetal by Inductively Coupled Plasma Optical Emission Spectrometry

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Cerium ion detection method

IPC TM-650 2.3.26.1-1994 Ionizable Detection of Surface Contaminants (Static Method)

中华人民共和国国家卫生和计划生育委员会, Cerium ion detection method

GB 11733-1989 Standard method for hygienic examination of sulfate in the atmosphere of residential areas by ion chromatography

The American Road & Transportation Builders Association, Cerium ion detection method

AASHTO T 291-1994 Standard Method of Test for Determining Water-Soluble Chloride Ion Content in Soil
AASHTO T 291-1994(R 2018) Standard Method of Test for Determining Water-Soluble Chloride Ion Content in Soil
AASHTO T 259-2002 Standard Method of Test for Resistance of Concrete to Chloride Ion Penetration
AASHTO T 290-1995 Standard Method of Test for Determining Water-Soluble Sulfate Ion Content in Soil
AASHTO T 332-2007 Standard Method of Test for Determining Chloride Ions in Concrete and Concrete Materials by Specific Ion Probe

American National Standards Institute （ANSI), Cerium ion detection method

ANSI/ASTM D3634:1999 Test Method for Trace Chloride Ion in Engine Coolants
ANSI/ASTM D5827:1998 Test Method for Determination of Chloride in Engine Coolant by Ion Chromatography

Jiangsu Provincial Standard of the People's Republic of China, Cerium ion detection method

DB32/T 4380-2022 Technical requirements and on-site testing methods for lithium-ion power battery systems of electric vehicles in operation

AENOR, Cerium ion detection method

UNE-EN ISO 25140:2011 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)

Lithuanian Standards Office , Cerium ion detection method

LST EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)

Canadian General Standards Board （CGSB), Cerium ion detection method

CGSB 2.11-94 17.3-CAN/CGSB-1994 Methodes D'Echantillonnage Et Et D'Essai Des Savons Et Detergents Determination De La Teneur En Ingredient Anionique Actif (Par Titrage Cationique)

Society of Motion Picture and Television Engineers (SMPTE), Cerium ion detection method

SMPTE RP 47-1999 Electronic Method of Dropout Detection and Counting

Professional Standard - Energy, Cerium ion detection method

煤炭工业部, Cerium ion detection method

MT/T 482-1995 Determination method of sulfate ions in acidic coal mine water

国家能源局, Cerium ion detection method

NB/T 42080-2016 Test method for ion conductive membranes for all-vanadium redox flow batteries

未注明发布机构, Cerium ion detection method

GJB 8793.7-2015 Testing method for niobium-coated uranium dioxide microspheres used in submarine nuclear power plants Part 7: Determination of boron Methanol distillation separation-ion selective electrode method

International Electrotechnical Commission (IEC), Cerium ion detection method

IEC 61988-2-5:2012 Plasma display panels - Part 2-5: Measuring methods - Acoustic noise

JP-JEITA, Cerium ion detection method

JEITA ED2730-2006 Climatic and mechanical testing methods for plasma display modules

机械电子工业部, Cerium ion detection method

JB 5232-1991 Preparation method of calibration solution for ion selective electrode measurement

Professional Standard - Light Industry, Cerium ion detection method

QB/T 4711-2014 Determination of inorganic elements in Chinese rice wine.Inductive coupled plasma mass spectrometry and inductive coupled plasma atomic emission spectrometry
QB/T 4851-2015 Determination of inorganic elements in wine.Inductive coupled plasma mass spectrometry and inductive coupled plasma atomic emission spectrometry

AASHTO - American Association of State Highway and Transportation Officials, Cerium ion detection method

TP 55-1998 Standard Method of Test for Determining Chloride Ions in Concrete and Concrete Materials by Specific Ion Probe
TP55-1998 Standard Test Method for Determining Chloride Ions in Concrete and Concrete Materials by Specific Ion Probe
T 332-2007 Standard Method of Test for Determining Chloride Ions in Concrete and Concrete Materials by Specific Ion Probe

GOSTR, Cerium ion detection method

GOST 34606-2019 Veterinary preparation, feed, feed additive. Method for determination of the content of aromatic components by gas-liquid chromatography with flame ionization detection

Standard Association of Australia （SAA）, Cerium ion detection method

AS 2434.9:2000(R2013)

BE-NBN, Cerium ion detection method

NBN T 02-207-1984 Chemical products for industrial use - General method for determination of chloride ions - Potentiometric method