ZH
RU
ES

g/d ratio

g/d ratio, Total:208 items.

In the international standard classification, g/d ratio involves: Components for aerospace construction, Aircraft and space vehicles in general, Shipbuilding and marine structures in general, Radiocommunications, Resistors, Lamps and related equipment, Laboratory medicine, Testing of metals, Cutting tools, Telecommunication systems, Rotating machinery, Electrical equipment for working in special conditions, Fasteners for aerospace construction, Fasteners, Non-destructive testing, Rubber and plastics products, Interface and interconnection equipment, Road engineering, Electrical wires and cables, Television and radio broadcasting, Mechanical testing, General methods of tests and analysis for food products, Pipeline components and pipelines, Construction industry, Buildings, Installations in buildings, Technical drawings.

Defense Logistics Agency, g/d ratio

DLA A-A-59330 VALID NOTICE 1-2005 GRINDING MACHINE, SURFACE, RECIPROCATING-TABLE, HORIZONTAL-SPINDLE, POWER-FEED [Superseded: DLA MIL-G-80088 D CANC NOTICE 1, DLA MIL-G-80088 D (1), DLA MIL-G-80088 D, DLA MIL-G-80088 C, DLA MIL-G-80088 B, DLA MIL-G-80088 A, DLA MIL-G-80088]
DLA A-A-59330-1998 GRINDING MACHINE, SURFACE, RECIPROCATING-TABLE, HORIZONTAL-SPINDLE, POWER-FEED [Superseded: DLA MIL-G-80088 D CANC NOTICE 1, DLA MIL-G-80088 D (1), DLA MIL-G-80088 D, DLA MIL-G-80088 C, DLA MIL-G-80088 B, DLA MIL-G-80088 A, DLA MIL-G-80088]
DLA A-A-59568-2001 GAGES, TIRE PRESSURE, SELF CONTAINED AND INFLATOR GAGE, PNEUMATIC TIRE [Superseded: DLA GG-G-91 D CANC NOTICE 2, DLA GG-G-91 D VALID NOTICE 1, DLA GG-G-91 D, DLA GG-G-91 C, DLA GG-G-91 B INT AMD 2, DLA GG-G-91 B]
DLA A-A-59345-2000 GRINDING MACHINE, CYLINDRICAL, EXTERNAL, PLAIN [Superseded: DLA MIL-G-23368 D CANC NOTICE 1, DLA MIL-G-23368 D, DLA MIL-G-23368 C, DLA MIL-G-23368 B (1), DLA MIL-G-23368 B, DLA MIL-G-23368 A]
DLA A-A-59351 VALID NOTICE 1-2005 GRINDING MACHINE, DRILL [Superseded: DLA MIL-G-45072 G CANC NOTICE 1, DLA MIL-G-45072 G, DLA MIL-G-45072 F (1), DLA MIL-G-45072 F, DLA MIL-G-45072 E, DLA MIL-G-45072 D, DLA MIL-G-45072 C (1), DLA MIL-G-45072 C]
DLA A-A-59351-1999 GRINDING MACHINE, DRILL [Superseded: DLA MIL-G-45072 G CANC NOTICE 1, DLA MIL-G-45072 G, DLA MIL-G-45072 F (1), DLA MIL-G-45072 F, DLA MIL-G-45072 E, DLA MIL-G-45072 D, DLA MIL-G-45072 C (1), DLA MIL-G-45072 C]
DLA A-A-59266 VALID NOTICE 1-2005 GRINDING MACHINE, UNIVERSAL, CYLINDRICAL, EXTERNAL, CENTER-TYPE [Superseded: DLA MIL-G-23823 E CANC NOTICE 1, DLA MIL-G-23823 E, DLA MIL-G-23823 D, DLA MIL-G-23823 C, DLA MIL-G-23823 B, DLA MIL-G-23823 A, DLA MIL-G-23823]
DLA A-A-59266-1998 GRINDING MACHINE, UNIVERSAL, CYLINDRICAL, EXTERNAL, CENTER-TYPE [Superseded: DLA MIL-G-23823 E CANC NOTICE 1, DLA MIL-G-23823 E, DLA MIL-G-23823 D, DLA MIL-G-23823 C, DLA MIL-G-23823 B, DLA MIL-G-23823 A, DLA MIL-G-23823]
DLA MIL-PRF-19500/614 H-2013 SEMICONDUCTOR DEVICE, FIELD EFFECT RADIATION HARDENED TRANSISTORS, N-CHANNEL, SILICON, TYPES 2N7380 AND 2N7381, JANTXV, M, D, R, F, G, AND H AND JANS, M, D, R, F, G, AND H
DLA A-A-59591-2000 CLOTH, BUNTING, COTTON, MERCERIZED [Superseded: DLA CCC-C-439 G CANC NOTICE 1, DLA CCC-C-439 G, DLA CCC-C-439 F VALID NOTICE 1, DLA CCC-C-439 F, DLA CCC-C-439 E, DLA CCC-C-439 D (2), DLA CCC-C-439 D]
DLA MIL-PRF-19500/614 G-2012 SEMICONDUCTOR DEVICE, FIELD EFFECT RADIATION HARDENED (TOTAL DOSE AND SINGLE EVENT EFFECTS) TRANSISTORS, N-CHANNEL, SILICON, TYPES 2N7380 AND 2N7381, JANTXV, M, D, R, F, G, AND H AND JANS, M, D, R, F, G, AND H
DLA MS51485 NOTICE 2-1999 SCREW, TAPPING, THREAD CUTTING, TYPES D, F, G OR T PAN HEAD, CROSS-RECESSED, CARBON STEEL
DLA MS51485 VALID NOTICE 1-1996 SCREW, TAPPING, THREAD CUTTING, TYPES D, F, G OR T PAN HEAD, CROSS-RECESSED, CARBON STEEL
DLA MS51485-1984 SCREW, TAPPING, THREAD CUTTING, TYPES D, F, G OR T PAN HEAD, CROSS-RECESSED, CARBON STEEL
DLA MIL-PRF-19500/613 D-2011 SEMICONDUCTOR DEVICE, TRANSISTOR, NPN, SILICON, POWER, TYPE 2N7373, JAN, JANTX, JANTXV, JANS AND JANSM, D, P, L, R, F, G, AND H
DLA MIL-PRF-19500/613 E-2013 SEMICONDUCTOR DEVICE, TRANSISTOR, NPN, SILICON, POWER, TYPE 2N7373, JAN, JANTX, JANTXV, JANS AND JANSM, D, P, L, R, F, G, AND H
DLA A-A-59551-2000 WIRE, ELECTRICAL, COPPER (UNINSULATED) [Superseded: DLA QQ-W-343 G CANC NOTICE 1, DLA QQ-W-343 G, DLA QQ-W-343 F NOTICE 1, DLA QQ-W-343 F, DLA QQ-W-343 E (1), DLA QQ-W-343 E, DLA QQ-W-343 D (1), DLA QQ-W-343 D, DLA QQ-W-00343 C (1), DLA QQ-W-00
DLA A-A-59709-2001 CLOTH, BUNTING, NYLON; AND NYLON AND WOOL [Superseded: DLA CCC-C-476 H CANC NOTICE 1, DLA CCC-C-476 H, DLA CCC-C-476 G VALID NOTICE 1, DLA CCC-C-476 G, DLA CCC-C-476 F, DLA CCC-C-476 E, DLA CCC-C-476 D]
DLA MIL-DTL-24308/3 J-2009 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS, GENERAL PURPOSE, CLASS D AND G, SOLDER TYPE
DLA MIL-DTL-24308/4 P-2009 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS, GENERAL PURPOSE, CLASS D AND G, CRIMP TYPE
DLA MIL-DTL-24308/3 J (1)-2013 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS, GENERAL PURPOSE, CLASS D AND G, SOLDER TYPE
DLA A-A-59269 A VALID NOTICE 1-2004 SCALES, DRAFTING AND SCALES, PLOTTING [Superseded: DLA GG-S-161 D CANC NOTICE 1, DLA GG-S-161 D SUPP 1, DLA GG-S-161 D, DLA GG-S-161 C (2), DLA GG-S-161 C (1), DLA GG-S-161 C SUPP 1, DLA GG-S-161 C, DLA GG-S-161 B NOTICE 2, DLA GG-S-161 B INT A
DLA A-A-59269 A-1999 SCALES, DRAFTING AND SCALES, PLOTTING [Superseded: DLA GG-S-161 D CANC NOTICE 1, DLA GG-S-161 D SUPP 1, DLA GG-S-161 D, DLA GG-S-161 C (2), DLA GG-S-161 C (1), DLA GG-S-161 C SUPP 1, DLA GG-S-161 C, DLA GG-S-161 B NOTICE 2, DLA GG-S-161 B INT A
DLA MIL-DTL-24308/2 T-2009 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, RECEPTACLE, SOCKET CONTACTS, GENERAL PURPOSE, CLASS D AND G, CRIMP TYPE
DLA MIL-DTL-24308/1 K (1)-2013 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, RECEPTACLE, SOCKET CONTACTS, GENERAL PURPOSE, CLASS D AND G, SOLDER TYPE

U.S. Military Regulations and Norms, g/d ratio

ARMY MIL-DTL-43098/14 VALID NOTICE 3-2013 Medallion, Eugene G. Fubini Award
ARMY MIL-PRF-23359 H-1997 DETECTOR, MINE, METALLIC, PORTABLE [Use In Lieu Of: ARMY MIL-D-0023359 G NOTICE 1]
ARMY MIL-DTL-15665/54 NOTICE 1-1996 INSIGNIA, AIDE, GENERAL OFFICERS, ARMY [Cancelled: ARMY MIL-I-3575/10 G CANC NOTICE 2, ARMY MIL-I-3575/10 G CANC NOTICE 1, ARMY MIL-I-3575/10 G, ARMY MIL-I-3575/10 F, ARMY MIL-I-3575/10 E, ARMY MIL-I-3575/10 D, ARMY MIL-I-3575/10 C, ARMY MIL-I-35

International Telecommunication Union (ITU), g/d ratio

ITU-T G.984.2 AMD 1-2006 Gigabit-capable Passive Optical Networks (G-PON): Physical Media Dependent (PMD) layer specification Amendment 1: New Appendix III – Industry best practice for 2.488 Gbit/s downstream, 1.244 Gbit/s upstream G-PON (Study Group 15)
ITU-T G.984.2-2003 Gigabit-capable Passive Optical Networks (GPON): Physical Media Dependent (PMD) layer specification SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS Digital sections and digital line system – Optical line systems for local and access
ITU-T G.984.3 AMD 2-2006 (Pre-Published) Gigabit-capable Passive Optical Networks (G-PON): Transmission Convergence Layer Specification Amendment 2
ITU-T G.984.3 AMD 1-2005 Gigabit-capable Passive Optical Networks (G-PON): Transmission convergence layer specification Amendment 1 Study Group 15
ITU-T G.984.3-2004 Gigabit-capable Passive Optical Networks (G-PON): Transmission convergence layer specification SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS Digital sections and digital line system ?Optical line systems for local and access netw
ITU-T G.984.4 AMD 3-2006 Gigabit-capable Passive Optical Networks (G-PON): ONT management and control interface specification Amendment 3 Study Group 15
ITU-T G.984.4 AMD 1-2005 Gigabit-capable Passive Optical Networks (GPON): ONT management and control interface specification Study Group 15
ITU-T G.729.1 AMD 5-2008 G.729-based embedded variable bit-rate coder: An 8-32 kbit/s scalable wideband coder bitstream interoperable with G.729 Amendment 5: New Annex D (Reference floating-point implementation for G.729.1 Annex C DTX/CNG) and corrections to the main body and Ann
ITU-T G.711.1 AMD 3-2010 Wideband embedded extension for G.711 pulse code modulation Amendment 3: Lossless compression of G.711 bitstreams in G.711.1 Study Group 16
ITU-R S.733-2000 Determination of the G/T ratio for Earth stations operating in the fixed-satellite service
ITU-T G.722.2 ANNEX D-2002 Wideband Coding of Speech at Around 16 kbit/s Using Adaptive Multi-Rate Wideband (AMR-WB) Annex D: Digital Test Sequences Series G: Transmission Systems and Media, Digital Systems and Networks Digital Terminal Equipments - Coding of Analogue Signals by M
ITU-T G.984.3-2008 Gigabit-capable Passive Optical Networks (G-PON): Transmission convergence layer specification Study Group 15
ITU-T G.984.6-2008 Gigabit-capable passive optical networks (GPON): Reach extension Study Group 15
ITU-T G.984.7-2010 Gigabit-capable passive optical networks (GPON): Long reach (Study Group 15)
ITU-T SERIES G SUPP 38-1998 Variable Bit Rate Calculations for ITU-T Recommendation G.767 Digital Circuit Multiplication Equipment (DCME) - Series G: Transmission Systems and Media Digital Systems and Networks Study Group 15; 10 pp
ITU-T G.984.5-2007 Gigabit-capable Passive Optical Networks (G-PON): Enhancement band Study Group 15
ITU-R S.733-2 FRENCH-2000 DETERMlNATION OF THE G/T RATIO FOR EARTH STATIONS OPERATlNG lN THE FIXED-SATELLITE SERVICE
ITU-R S.733-2 SPANISH-2000 DETERMlNATION OF THE G/T RATIO FOR EARTH STATIONS OPERATlNG lN THE FIXED-SATELLITE SERVICE
ITU-R S.733-2-2000 Determination of the G/T Ratio for Earth Stations Operating in the Fixed-Satellite Service
ITU-T G SUPP 38-1998 Variable bit rate calculations for ITU-T Recommendation G.767 Digital Circuit Multiplication Equipment (DCME)
ITU-T G.984.1 AMD 1-2009 Gigabit-capable passive optical networks (GPON): General characteristics Amendment 1 Study Group 15
ITU-T SERIE G SUPP 38 FRENCH-1998 Variable bit rate calculations for ITU-T Recommendation G.767 Digital Circuit Multiplication Equipment (DCME)
ITU-T SERIE G SUPP 38 SPANISH-1998 Variable bit rate calculations for ITU-T Recommendation G.767 Digital Circuit Multiplication Equipment (DCME)
ITU-T G.729.1 AMD 8-2013 G.729-based embedded variable bit-rate coder: An 8-32 kbit/s scalable wideband coder bitstream interoperable with G.729 Amendment 8: New Annex G describing an alternative floating-point implementation of the superwideband monaural extension (Study Group 1
ITU-T G.729.1 AMD 7-2012 G.729-based embedded variable bit-rate coder: An 8-32 kbit/s scalable wideband coder bitstream interoperable with G.729 Amendment 7: New Annex F with voice activity detector using ITU-T G.720.1 Annex A (Study Group 16)
ITU-T G.984.4 NOTE-2009 Gigabit-capable passive optical networks (G-PON): ONT management and control interface specification
ITU-T G.984.5 AMD 1-2009 Gigabit-capable passive optical networks (G-PON): Enhancement band Amendment 1 Study Group 15
ITU-T G.729.1 AMD 3-2007 G.729 based Embedded Variable bit-rate coder: An 8-32 kbit/s scalable wideband coder bitstream interoperable with G.729 Amendment 3: Extension of the G.729.1 low-delay mode functionality to 14 kbit/s and corrections to the main body and Annex B Study Gro
ITU-T G.984.3 AMD 3-2012 Gigabit-capable Passive Optical Networks (G-PON): Transmission convergence layer specification Amendment 3 Study Group 15
ITU-R BS.707-5-2005 Transmission of multisound in terrestrial television systems PAL B B1 D1 G H and I and SECAM D K K1 and L
ITU-T G.729.1 FRENCH-2006 G.729-based embedded variable bit-rate coder: An 8-32 kbit/s scalable wideband coder bitstream interoperable with G.729
ITU-T G.729.1 AMD 6-2010 G.729-based embedded variable bit-rate coder: An 8-32 kbit/s scalable wideband coder bitstream interoperable with G.729 Amendment 6: New Annex E on superwideband scalable extension (Study Group 16)
ITU-T G.726 APPEND II TV-1991 Description of the Digital Test Sequences for the Verification of the G.726 40, 32, 24 and 16 kbit/s ADPCM Algorithm - Series G: Transmission Systems and Media, Digital Systems and Networks Digital Transmission Systems - Terminal Equipments - Coding of A
ITU-T G.711.1 AMD 4-2010 (Pre-Published) Wideband embedded extension for G.711 PCM: New Annex D with superwideband extension Amendment 4
ITU-R BS.707-2005 Transmission of multisound in terrestrial television systems PAL B, B1, D1, G, H and I, and SECAM D, K, K1 and L
ITU-T G.984.4 CORR 1-2010 Gibabit-capable passive optical networks (G-PON): ONT management and control interface specification Corrigendum 1 (Study Group 15)
ITU-T G.727 APPEND I TV-1991 Description of the Digital Test Sequences for the Verification of the G.727 5-, 4-, 3- and 2-bit/Sample Embedded ADPCM Algorithm - Series G: Transmission Systems and Media, Digital Systems and Networks Digital Transmission Systems - Terminal Equipments -
ITU-T G.984.4-2008 Gigabit-capable Passive Optical Networks (G-PON): ONT management and control interface specification Study Group 15
ITU-R BS.707-5 SPANISH-2005 Transmission of multisound in terrestrial television systems PAL B, B1 D1, G, H and I, and SECAM D, K, K1 and L
ITU-T G.728 APP I FRENCH-1995 Programs and test sequences for implementation verification of the algorithm of the G.728 16 kbit/s LD-CELP speech coder Programme et s閝uences de test pour la v閞ification des impl閙entations de l'algorithme du vocodeur LD-CELP G.728 ?16 kbit/s

United States Navy, g/d ratio

NAVY MIL-D-3134 J (1)-1989 DECK COVERING MATERIALS [Use In Lieu Of: NAVY MIL-D-003134 G]

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, g/d ratio

ITU-R S.733-1-1993 Determination of the G/T Ratio for Earth Stations Operating in the Fixed-Satellite Service
ITU-R BS.707-5 FRENCH-2005 Transmission of multisound in terrestrial television systems PAL B@ B1 D1@ G@ H and I@ and SECAM D@ K@ K1 and L
ITU-R BS.707-4-1998 Transmission of Multisound in Terrestrial Television Systems Pal B@ D1@ G@ H and I@ and Secam D@ K@ K1@ and L
ITU-R IS.849-1 FRENCH-1993 DETERMINATION OF THE COORDINATION AREA FOR EARTH STATIONS OPERATING WITH NON-GEOSTATIONARY SPACECRAFT IN BANDS SHARED WITH TERRESTRIAL SERVICES

Japanese Industrial Standards Committee (JISC), g/d ratio

JIS C 6408:1994 Fixed carbon film resistors for use in electronic equipment (characteristic D and G)
JIS C 5212:1995 Fixed carbon film chip resistors cylindrical type for use in electronic equipment (form 27, characteristic D and G, grade C)

AIA/NAS - Aerospace Industries Association of America Inc., g/d ratio

NASM24634-2012 SCREW@ TAPPING@ THREAD CUTTING@ TYPES D@ F@ G AND T@ APPROXIMATE HOLE SIZES FOR (Rev 1)
NASM24630-2012 SCREW@ TAPPING@ THREAD CUTTING@ TYPES D@ F@ G OR T@ PAN HEAD@ CRUCIFORM RECESSED@ CRES (Rev 1)
NASM24630-2018 SCREW@ TAPPING@ THREAD CUTTING@ TYPES D@ F@ G OR T@ PAN HEAD@ CRUCIFORM RECESSED@ CRES (Rev 2)
NASM24630-1998 Screw@ Tapping-Thread Cutting@ Types D@F@G or T@ Pan Head@ Cross Recessed@ Corrosion Resisting Steel
NASM24634-1998 Screw@ Tapping@ Thread Cutting-Types D@F@G and T@ Approximate Hole Sizes for
NASM24629-1998 Screw@ Tapping-Thread Cutting@ Types D@F@G@ or T@ Pan Head@ Cross Recessed@ Steel@ Carbon Cadmium Plated
NASM24627-1998 Screw@ Tapping-Thread Cutting@ Type D@ F@ G@ or T@ Flat 82 Degree Countersunk Head@ Cross-Recessed@ Carbon Steel
NASM24628-2011 SCREW@ TAPPING@ THREAD CUTTING@ TYPES D@ F@ G OR T@ FLAT 82° COUNTERSUNK HEAD@ CRUCIFORM-RECESSED@ CRES (Rev 1)
NASM24628-1999 Screw@ Tapping - Thread Cutting@ Types D@ F@ G or T@ Flat 82 Degrees Countersunk Head@ Cross-Recessed@ Corrosion-Resisting Steel
NASM24627-2013 SCREW@ TAPPING@ THREAD CUTTING@ TYPES D@ F@ G OR T@ FLAT 82 degrees COUNTERSUNK HEAD@ CRUCIFORM RECESS@ CARBON STEEL (Rev 1)
NASM24629-2018 SCREW@ TAPPING@ THREAD CUTTING@ TYPES D@ F@ G@ OR T@ PAN HEAD@ CRUCIFORM RECESSED@ CARBON STEEL@ CADMIUM PLATED (Rev 2)
NASM24629-2011 SCREW@ TAPPING@ THREAD CUTTING@ TYPES D@ F@ G@ OR T@ PAN HEAD@ CRUCIFORM RECESSED@ CARBON STEEL@ CADMIUM PLATED (Rev 1)

German Institute for Standardization, g/d ratio

DIN 49848-3:2002-12 Bicycle incandescent lamps - Part 3: Categories C, D, E, F and G
DIN 49848-3:2002 Bicycle incandescent lamps - Part 3: Categories C, D, E, F and G
DIN EN ISO 6508-1:2006 Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-1:2005); English version of DIN EN ISO 6508-1:2006-03
DIN EN ISO 6508-3:2006 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-3:2005); English version of DIN EN ISO 6508-3:2006-03

Institute of Interconnecting and Packaging Electronic Circuits (IPC), g/d ratio

IPC TM-650 2.3.17-1997 Resin Flow Percent of Prepreg Revision D
IPC HDBK-610-2002 Handbook and Guide to IPC-A-610 (Includes IPC-A-610B-C-D Comparisons) Amendment 1: October 2005

PL-PKN, g/d ratio

PN C94153-41-1990 Rubber vulcanized for technical articles Rubber vulcanized type D classe G
PN C94153-71-1990 Rubber vulcanized lor technical articles Rubber vulcanized typu G elass D
PN H04355-1991 Hardness Rockwell test for metals. Scales A,B,C,D,E,F,G,H,K,

Korean Agency for Technology and Standards (KATS), g/d ratio

KS C 6370-1995(2000) FIXED CARBON FILM RESISTORS FOR ELECTRONICS EQUIPMENT ( D,G )
KS C 6370-1990 FIXED CARBON FILM RESISTORS FOR ELECTRONICS EQUIPMENT ( D,G )
KS C 6054-2001 FIXED CARBON FILM CHIP CYLINDRICAL TYPE RESISTORS FOR USE IN ELECTRONIC EQUIPMENT (FORM 27, CHARACTERISTIC D AND G,GRADE C)
KS M ISO 6508-1:2002 Metallic materials-Rockwell hardness test-Part 1:Test method(scales A, B, C, D, E, F, G, H, K, N, T)
KS C 6054-1992(1997) FIXED CARBON FILM CHIP CYLINDRICAL TYPE RESISTORS FOR USE IN ELECTRONIC EQUIPMENT (FORM 27, CHARACTERISTIC D AND G,GRADE C)
KS M ISO 6508-1-2002(2017) Metallic materials－Rockwell hardness test－Part 1：Test method(scales A, B, C, D, E, F, G, H, K, N, T)
KS B ISO 12721:2008 Non-destructive testing－Thermal neutron radiographic testing－Determination of beam L/D ratio
KS M ISO 6508-1-2002(2022) Metallic materials－Rockwell hardness test－Part 1：Test method(scales A, B, C, D, E, F, G, H, K, N, T)
KS B ISO 12721:2018 Non-destructive testing — Thermal neutron radiographic testing — Determination of beam L/D ratio

CH-SNV, g/d ratio

SNV 81509-1952

GB-REG, g/d ratio

REG 29 CFR PART 2510-2011 DEFINITIONS OF TERMS USED IN SUBCHAPTERS C, D, E, F, AND G OF THIS CHAPTER

国家药监局, g/d ratio

YY/T 1240-2023 D-dimer assay kit (immune turbidimetric method)

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, g/d ratio

ITU-T X.832 FRENCH-1995 INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - GENERIC UPPER LAYERS SECURITY: SECURITY EXCHANGE SERVICE ELEMENT (SESE) PROTOCOL SPECIFICATION
ITU-T X.831 FRENCH-1995 INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - GENERIC UPPER LAYERS SECURITY: SECURITY EXCHANGE SERVICE ELEMENT (SESE) SERVICE DEFINITION
ITU-T K.32 FRENCH-1995 IMMUNITY REQUIREMENTS AND TEST METHODS FOR ELECTROSTATIC DISCHARGE TO TELECOMMUNICATION EQUIPMENT - GENERIC EMC RECOMMENDATION
SERIES G SUPP 38-1998 Variable Bit Rate Calculations for ITU-T Recommendation G.767 Digital Circuit Multiplication Equipment (DCME) - Series G: Transmission Systems and Media@ Digital Systems and Networks (Study Group 15; 10 pp)
ITU-T G.728 ANX G FRENCH-1994 CODING OF SPEECH AT 16 kbit/s USING LOW-DELAY CODE EXCITED LINER PREDICTION ANNEX G: 16 kbit/s FIXED POINT SPECIFICATION
ITU-T X.722 AMD 1 FRENCH-1995 INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - STRUCTURE OF MANAGEMENT INFORMATION: GUIDELINES FOR THE DEFINITION OF MANAGED OBJECTS AMENDMENT 1: SET BY CREATE AND COMPONENT REGISTRATION

Aerospace Industries Association/ANSI Aerospace Standards, g/d ratio

AIA/NAS NASM24634-1998 Screw, Tapping, Thread Cutting-Types D,F,G and T, Approximate Hole Sizes for
AIA/NAS NASM21051-2010 NUT, SELF-LOCKING, PLATE, ONE LUG, LOW HEIGHT, STEEL, 125 KSI FTU, 450 Degrees F (Rev 3)
AIA/NAS NASM24629-1998 Screw, Tapping-Thread Cutting, Types D,F,G, or T, Pan Head, Cross Recessed, Steel, Carbon Cadmium Plated
AIA/NAS NASM24630-1998 Screw, Tapping-Thread Cutting, Types D,F,G or T, Pan Head, Cross Recessed, Corrosion Resisting Steel
AIA/NAS NASM22529-2011 GROMMET, EDGING Rev 1 [Superseded: DLA MIL-DTL-22529 D CANC NOTICE 2, DLA MIL-DTL-22529 D CANC NOTICE 1, DLA MIL-DTL-22529 D (2), DLA MIL-DTL-22529 D (1), DLA MIL-DTL-22529 D, DLA MIL-DTL-22529 C (1), DLA MIL-DTL-22529 C, DLA MIL-G-22529 B VALID
AIA/NAS NAS 693-1987 Nut Assembly, Self- Locking, Gang Channel- Low Height, Csk [Use: AIA/NAS NAS 380, AIA/NAS NAS 380, DLA MS21066 REV G CANC NOTICE 1, DLA MS21066 REV G, DLA MS21066 REV F, DLA MS21066 REV E, DLA MS21066 REV D, DLA MS21067 REV G CANC NOTICE 1, DLA MS2
AIA/NAS NAS 694-1987 Nut Assembly, Self- Locking, Gang Channel- Low Height, Csk [Use: AIA/NAS NAS 380, AIA/NAS NAS 380, DLA MS21066 REV G CANC NOTICE 1, DLA MS21066 REV G, DLA MS21066 REV F, DLA MS21066 REV E, DLA MS21066 REV D, DLA MS21067 REV G CANC NOTICE 1, DLA MS2
AIA/NAS NAS 695-1987 Nut Assembly, Self- Locking, Gang Channel- Low Height, Csk [Use: AIA/NAS NAS 380, AIA/NAS NAS 380, DLA MS21066 REV G CANC NOTICE 1, DLA MS21066 REV G, DLA MS21066 REV F, DLA MS21066 REV E, DLA MS21066 REV D, DLA MS21067 REV G CANC NOTICE 1, DLA MS2
AIA/NAS NASM24629-2011 SCREW, TAPPING, THREAD CUTTING, TYPES D, F, G, OR T, PAN HEAD, CRUCIFORM RECESSED, CARBON STEEL, CADMIUM PLATED (Rev 1)
AIA/NAS NAS 685-1974 Nut, Self-Locking, Plate-Corner, Low Height, Csk Superseded - December 1974 (Rev. 11) [Use: DLA MS21057 REV G CANC NOTICE 1, DLA MS21057 REV G, DLA MS21057 REV F, DLA MS21057 REV E, DLA MS21057 REV D, DLA MS21057 REV C, DLA MS21058 REV D CANC NOT
AIA/NAS NASM24627-1998 Screw, Tapping-Thread Cutting, Type D, F, G, or T, Flat 82 Degree Countersunk Head, Cross-Recessed, Carbon Steel
AIA/NAS NAS 682-1987 Nut, Self-Locking, Plate-One Lug, Low Height, C'Bore Superseded - November 1987 (Rev. 10) [Use: DLA MS21051 REV G CANC NOTICE 1, DLA MS21051 REV G (1), DLA MS21051 REV G, DLA MS21051 REV F, DLA MS21051 REV E, DLA MS21051 REV D, DLA MS21051 REV C,
AIA/NAS NASM24628-1999 Screw, Tapping - Thread Cutting, Types D, F, G or T, Flat 82 Degrees Countersunk Head, Cross-Recessed, Corrosion-Resisting Steel
AIA/NAS NASM20615-2010 RIVET, SOLID, UNIVERSAL HEAD, BRASS, COPPER, NICKEL-COPPER ALLOY Rev 4 [Superseded: DLA MS20615 REV G CANC NOTICE 1, DLA MS20615 REV G, DLA MS20615 REV F, DLA MS20615 REV E, DLA MS20615 REV D, DLA MS20615 REV C, DLA MS20615 REV B, DLA MS20615 REV
AIA/NAS NASM24628-2011 SCREW, TAPPING, THREAD CUTTING, TYPES D, F, G OR T, FLAT 82° COUNTERSUNK HEAD, CRUCIFORM-RECESSED, CRES (Rev 1)
AIA/NAS NAS 698-1987 Nut, Self-Locking, Plate-Corner, Low Height C'Bore, Reduced Rivet Spacing Superseded - November 1987 (Rev. 12) [Use: DLA MS21073 REV G CANC NOTICE 1, DLA MS21073 REV G, DLA MS21073 REV F, DLA MS21073 REV E, DLA MS21073 REV D, DLA MS21073 REV C, DL
AIA/NAS NAS 684-1987 Nut, Self-Locking, Plate-Corner, Low Height, C'Bore Superseded - November 1987 (Rev. 11) [Use: DLA MS21055 REV G CANC NOTICE 1, DLA MS21055 REV G, DLA MS21055 REV F, DLA MS21055 REV E, DLA MS21055 REV D, DLA MS21055 REV C, DLA MS21056 REV F CANC

AASHTO - American Association of State Highway and Transportation Officials, g/d ratio

T 100-2003 Standard Method of Test for Specific Gravity of Soils (ASTM Designation: D 854-00)
T 295-2002 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method (HM-22; Part IIA; ASTM Designation D 3142-97)
T 228-2004 Standard Method of Test for Specific Gravity of Semi-Solid Bituminous Materials (ASTM Designation: D 70-03)
T 228-2003 Standard Method of Test for Specific Gravity of Semi-Solid Bituminous Materials (ASTM Designation D 70-97)
T 100-2001 Standard Method of Test for Specific Gravity of Soils (HM-22; Part IIA; ASTM Designation D 854-98)
T 228-1996 Standard Method of Test for Specific Gravity of Semi-Solid Bituminous Materials (HM-22; PART IIB; D 70-82(1990))

Aerospace Industries Association, g/d ratio

AIA NASM24629-1998 Screw, Tapping-Thread Cutting, Types D,F,G, or T, Pan Head, Cross Recessed, Steel, Carbon Cadmium Plated FSC 5305
AIA NASM24630-1998 Screw, Tapping-Thread Cutting, Types D,F,G or T, Pan Head, Cross Recessed, Corrosion Resisting Steel FSC 5305
AIA NASM24634-1998 Screw, Tapping, Thread Cutting-Types D,F,G and T, Approximate Hole Sizes for FSC 5305
AIA NASM24627-1998 Screw, Tapping-Thread Cutting, Type D, F, G, or T, Flat 82 Degree Countersunk Head, Cross-Recessed, Carbon Steel FSC 5305
AIA NASM24628-1999 Screw, Tapping - Thread Cutting, Types D, F, G or T, Flat 82 Degrees Countersunk Head, Cross-Recessed, Corrosion-Resisting Steel FSC 5305

American Society of Mechanical Engineers (ASME), g/d ratio

ASME N-652-1-2001 Alternative Requirements to Categories B-G-1, B-G-2, and C-D Bolting Examination Methods and Selection Criteria Section XI, Division 1; (SUPP 12)

National Metrological Verification Regulations of the People's Republic of China, g/d ratio

JJG 112-2003 Verification Regulation of Metallic Rockwell Hardness Testers (scales A,B,C,D,E,F,G,H,K,N,T)
JJG 112-2013 Metallic Rockwell Hardness Testing Machines (Scales A, B, C, D, E, F, G, H, K, N, T)
JJG 113-2003 Verification Regulation of Metallic Rockwell Hardness Reference Blocks (scales A,B,C,D,E,F,G,H,K,N,T)
JJG 113-2013 Metallic Rockwell Hardness Reference Blocks (Scales A, B, C, D, E, F, G, H, K, N, T)

International Organization for Standardization (ISO), g/d ratio

ISO 6508:1986 Metallic materials; Hardness test; Rockwell test (scales A - B - C - D - E - F - G - H - K)
ISO 716:1986 Metallic materials; Hardness test; Verification of Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K)
ISO 12721:2000 Non-destructive testing - Thermal neutron radiographic testing - Determination of beam L/D ratio
ISO 6508-1:1999 Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
ISO 6508-1:2005 Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
ISO 6508-3:1999 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
ISO 6508-3:2005 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
ISO 6508-2:1999 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
ISO 674:1988 Metallic materials; hardness test; calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A-B-C-D-E-F-G-H-K)

American National Standards Institute （ANSI), g/d ratio

ANSI/UL 674-2003 Electric Motors and Generators for Use in Hazardous Locations, Class I Groups C and D, Class II Groups E, F and G
ANSI/ASHRAE/IESNA 90.1-2001 Energy Efficient Design of New Buildings Except Low-Rise Residential Buildings (Including Addenda B, C, D, E, F, G, I and M)

RO-ASRO, g/d ratio

STAS 7169/3-1988 VERIFICATION OF ROCKWELL HARDNESS TESTING MACHINES Scales A,B:C,D,E,F,G,H,K,L,M,R and S

SE-SIS, g/d ratio

SIS SMS 2492-1967 V-helt pulleys. Pitch diameters and ratios. Section Y, Z, A, B, C, D, E

Standard Association of Australia （SAA）, g/d ratio

AS 1815.1:2007 Metallic materials - Rockwell hardness test - Test method (scales A, B, C, D, E, F, G, H, K, N, T)
AS 1815.2:2007 Metallic materials - Rockwell hardness test - Verification and calibration of testing machine (scales A, B, C, D, E, F, G, H, K, N, T)
AS 1815.3:2007 Metallic materials - Rockwell hardness test - Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-3:2005, MOD)

American Society for Testing and Materials (ASTM), g/d ratio

ASTM E803-91 Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams
ASTM E803-91(2013) Standard Test Method for Determining the L/D?Ratio of Neutron Radiography Beams
ASTM D6995-21 Standard Test Method for Determining Field VMA Based on the Maximum Specific Gravity of an Asphalt Mixture (Gmm)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, g/d ratio

GB/T 31362-2015 Non-destructive testing.Thermal neutron radiographic testing.Determination of beam L/D ratio
GB/T 230.1-2004 Metallic Rockwell hardness test-Part1:Test method(scales A、B、C、D、E、F、G、H、K、N、T)
GB/T 230.1-2009 Metallic materials.Rockwell hardness test.Part 1:Test method(scales A、B、C、D、E、F、G、H、K、N、T)
GB/T 230.3-2002 Metallic Rockwell hardness test--Part 3: Calibration of hardness reference blocks (scales A,B,C,D,E,F,G,H,K,N,T)
GB/T 230.2-2002 Metallic Rockwell hardness test--Part 2: Verification and calibration of hardness testers(scales A,B,C,D,E,F,G,H,K,N,T)
GB/T 230.3-2012 Metallic materials.Rockwell hardness test.Part 3:Calibration of reference blocks (scales A,B,C,D,E,F,G,H,K,N,T)

British Standards Institution (BSI), g/d ratio

BS EN ISO 6508-1:1999 Metallic materials - Rockwell hardness test - Test method (scales A, B, C, D, E, F, G, H, K, N, T)
BS EN ISO 6508-1:2006 Metallic materials - Rockwell hardness test - Test method (scales A, B, C, D, E, F, G, H, K, N, T)
BS EN ISO 6508-3:2006 Metallic materials - Rockwell hardness test - Calibration and reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
BS EN ISO 6508-3:1999 Metallic materials - Rockwell hardness test - Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
BS EN ISO 6508-2:1999 Metallic materials - Rockwell hardness test - Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N , T)
BS EN ISO 6508-2:2006 Metallic materials - Rockwell hardness test - Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
BS EN 10109-2:1996 Metallic Materials - Hardness Test - Part 2: Verification of Rockwell Hardness Testing Machines (Scales A, B, C, D, E, F, G, H, K, N, T)

ES-AENOR, g/d ratio

UNE 7-424 Pt.5-1988

CZ-CSN, g/d ratio

CSN ISO 6508:1993 Metallic materials. Hardness test. Rockwell test (Scales A-B-C-D-E-F-G-H-K)

ZA-SANS, g/d ratio

SANS 12721:2004 Non-destructive testing - Thermal neutron radiographic testing - Determination of beam L/D ratio
SANS 6508-1:2003 Metallic materials - Rockwell hardness test Part 1: Test method (scales A,B,C,D,E,F,G,H,K,N,T)
SANS 6508-1:2009 Metallic materials - Rockwell hardness test Part 1: Test method (scales A,B,C,D,E,F,G,H,K,N,T)
SANS 6508-3:2003 Metallic materials - Rockwell hardness test Part 3: Calibration of reference blocks (scales A,B,C,D,E,F,G,H,K,N,T)
SANS 6508-3:2009 Metallic materials - Rockwell hardness test Part 3: Calibration of reference blocks (scales A,B,C,D,E,F,G,H,K,N,T)

US-CFR-file, g/d ratio

CFR 20-345.307-2015 Employees’ Benefits. Part345:Employers’contributions and contribution reports. SubpartD:Contribution rates. Section345.307:Rate protest.
CFR 29-2510.3-16-2013 Labor. Part2510:Definitions of terms used in subchapters c, d, e, f, and g of this chapter. Section2510.3-16:Definition of "plan administrator.".

European Committee for Standardization (CEN), g/d ratio

EN ISO 6508-1:1999 Metallic Materials - Rockwell Hardness Test - Part 1: Test Method (Scales A, B, C, D, E, F, G, H, K, N, T) ISO 6508-1: 1999
EN ISO 6508-1:2015 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2015)
EN ISO 6508-1:2016 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
EN ISO 6508-1:2005 Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) ISO 6508-1: 2005
EN 10109-2:1994 Metallic Materials - Hardness Test - Part 2: Verification of Rockwell Hardness Testing Machines (Scales A, B, C, D, E, F, G, H, K, N, T)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), g/d ratio

ASHRAE 15& 34-2010 Safety Standard for Refrigeration Systems Incorporates ANSI/ASHRAE Standard 15-2007 and Addenda a, b, c, d, e, f, g, h, and i

Association Francaise de Normalisation, g/d ratio

NF A03-153-1:2006 Metallic materials - Rockwell hardness test - Part 1 : test method (scales A, B, C, D, E, F, G, H, K, N, T).
NF A03-153-3:2006 Metallic materials - Rockwell hardness test - Part 3 : calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T).

The American Road & Transportation Builders Association, g/d ratio

AASHTO T 100-2001 Standard Method of Test for Specific Gravity of Soils HM-22; Part IIA; ASTM Designation D 854-98
AASHTO T 295-2002 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method HM-22; Part IIA; ASTM Designation D 3142-97
AASHTO T 228-1996 Standard Method of Test for Specific Gravity of Semi-Solid Bituminous Materials HM-22; PART IIB; D 70-82(1990) R(2000)

VN-TCVN, g/d ratio

TCVN 257-1-2007 Metallic materials.Rockwell hardness test.Part 1:Test method(scales A, B, C, D, E, F, G, H, K, N, T)
TCVN 257-3-2007 Metallic materials.Rockwell hardness test.Part 3:Calibration of reference blocks(scales A, B, C, D, E, F, G, H, K, N, T)

TH-TISI, g/d ratio

TIS 2171.1-2012 Metallic materials.rockwell hardness test.part 1: test method (scale a, b, c, d, e, f, g, h, k, n, t)

Lithuanian Standards Office , g/d ratio

LST EN 12822-2014 Foodstuffs - Determination of vitamin E by high performance liquid chromatography - Measurement of ?-, ?-, ?- and ?-tocopherol
LST EN ISO 6508-1:2006 Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-1:2005)

Danish Standards Foundation, g/d ratio

DS/EN ISO 6508-1:2006 Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
DS/EN ISO 6508-3:2006 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)

(U.S.) Ford Automotive Standards, g/d ratio

FORD ESB-M3H48-B2-2008 MAT, POLYPROPYLENE, FLAT NEEDLED, NON-BACKCOATED, 375 g/m2 ***TO BE USED WITH FORD WSS-M99P1111-A***

KR-KS, g/d ratio

KS B ISO 12721-2018 Non-destructive testing — Thermal neutron radiographic testing — Determination of beam L/D ratio