ZH
RU
ES

How does the power supply control the voltage

How does the power supply control the voltage, Total:493 items.

In the international standard classification, How does the power supply control the voltage involves: Rectifiers. Convertors. Stabilized power supply, Transformers. Reactors, Environmental protection, Wastes, Lamps and related equipment, Radiation measurements, Nuclear energy engineering, Welding, brazing and soldering, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Switchgear and controlgear, Electronic tubes, Applications of information technology, Insulating materials, Electrical wires and cables, Telecommunications in general, Fluid power systems, Power transmission and distribution networks, Installations in buildings, Aids for disabled or handicapped persons, Electrical engineering in general, Coatings and related processes used in aerospace industry, Aerospace electric equipment and systems, Automatic controls for household use, Electric filters, Characteristics and design of machines, apparatus, equipment, Integrated circuits. Microelectronics, Insulation, Test conditions and procedures in general, Protection against fire, Telecommunication systems, Power stations in general, Valves, Electrical accessories, Industrial automation systems, Semiconductor devices, Piezoelectric and dielectric devices, Electricity. Magnetism. Electrical and magnetic measurements, Aerospace fluid systems and components, Equipment for the chemical industry, Equipment for petroleum and natural gas industries, Electrical equipment for working in special conditions, Agricultural machines, implements and equipment, Electromagnetic compatibility (EMC), Domestic electrical appliances in general, Vocabularies, Refrigerating technology, Domestic, commercial and industrial heating appliances, Electrical and electronic testing, Protection against excessive pressure, Rotating machinery, Air quality, Electromechanical components for electronic and telecommunications equipment, Road vehicle systems, Components for electrical equipment.

Professional Standard - Machinery, How does the power supply control the voltage

JB/T 8948-1999 Low-voltage power supple d.c.output for electric control equipment
JB/T 9688-2015 Crystal brake pipe controlled high-voltage source for electrostatic precipitator
JB/T 9688-2007 Crystal brake pipe controlled high-voltage source for electric dust collector

ZA-SANS, How does the power supply control the voltage

SANS 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers
SANS 300132-3:2004 Environmental Engineering (EE); Power supply interface at the input to telecommunications equipment Part 3: Operated by rectified current source, alternating current source or direct current source up to 400 V
SANS 61439-2:2009 Low-voltage switchgear and controlgear assemblies Part 2: Power switchgear and controlgear assemblies
SANS 60947-5-5:2005 Low-voltage switchgear and controlgear Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
SANS 60947-5-6:1999 Low-voltage switchgear and controlgear Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)
SANS 60730-2-6:2007 Automatic electrical controls for household and similar use Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
SANS 60335-2-77:2006 Safety of household and similar electrical appliances Part 2-77: Particular requirements for pedestrian controlled mains-operated lawnmowers
SANS 60947-5-3:2005 Low-voltage switchgear and controlgear Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)

Society of Automotive Engineers (SAE), How does the power supply control the voltage

SAE AIR1245A-2007 Power Sources for Fluidic Controls
SAE AIR1245-1991 POWER SOURCES FOR FLUIDIC CONTROLS
SAE AMS2759/12A-2007 Gaseous Nitrocarburizing, Automatically Controlled by Potentials
SAE ARP4741-2008 Aerospace-Hydraulic Switching Valve, Pressure or Pilot Operated

International Electrotechnical Commission (IEC), How does the power supply control the voltage

IEC 63128:2019 Lighting control interface for dimming – Analogue voltage dimming interface for electronic current sourcing controlgear
IEC 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporationg control transformers
IEC 61558-2-2:2022 RLV Safety of transformers, reactors, power supply units and combinations thereof - Part 2-2: Particular requirements and tests for control transformers and power supply units incorporating control transf
IEC 61558-2-2:2022 EXV Safety of transformers, reactors, power supply units and combinations thereof - Part 2-2: Particular requirements and tests for control transformers and power supply units incorporating control transf
IEC 61558-2-2:2022 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-2: Particular requirements and tests for control transformers and power supply units incorporating control transf
IEC 61439-2:2020 Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies
IEC 61558-2-2:1997 Safety of power transformers, power supply units and similar - Part 2-2: Particular requirements for control transformers
IEC 62386-205:2009 Digital addressable lighting interface - Part 205: Particular requirements for control gear - Supply voltage controller for incandescent lamps (device type 4)
IEC 62271-202:2006 High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation
IEC 60946:1988 Binary direct voltage signals for process measurement and control systems
IEC 62384:2006 D.C. or A.C. supplied electronic control gear for LED modules - Performance requirements
IEC TS 61994-3:2003 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 3: Piezoelectric and dielectric oscillators
IEC 61225:2019 Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for static uninterruptible DC and AC power supply systems
IEC 61958:2000 High-voltage prefabricated switchgear and controlgear assemblies - Voltage presence indicating systems
IEC 60730-2-6:2015 Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
IEC 60730-2-6:2015+AMD1:2019 CSV Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
IEC 61347-2-7:2011+AMD1:2017+AMD2:2021 CSV Lamp controlgear - Part 2-7: Particular requirements for electric source for safety services (ESSS) supplied electronic controlgear for emergency lighting (self-contained)
IEC 62442-1:2011 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
IEC 62195/AMD1:2002 Power system control and associated communications - Deregulated energy market communciations; Amendment 1
IEC 49/922/DTS:2010 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 2: Piezoelectric and dielectric filters
IEC 62442-2:2014 Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear
IEC TR 62271-310:2008 High-voltage switchgear and controlgear - Part 310: Electrical endurance testing for circuit-breakers a rated voltage 52 kV
IEC 60947-9-1:2019 Low-voltage switchgear and controlgear - Part 9-1: Active arc-fault mitigation systems - Arc quenching devices
IEC 60335-2-77:2002 Household and similar electrical appliances - Safety - Part 2-77: Particular requirements for pedestrian controlled mains-operated lawnmowers
IEC 62271-106:2011 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
IEC 60730-2-6:2007 Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
IEC 62271-202:2022 High-voltage switchgear and controlgear - Part 202: AC prefabricated substations for rated voltages above 1 kV and up to and including 52 kV
IEC 62271-212:2016 High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) for AC voltages up to 52 kV
IEC 62271-212:2022 RLV High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) for AC voltages up to 52 kV
IEC 62271-212:2022 High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) for AC voltages up to 52 kV
IEC 60730-2-6:1991 Automatic electrical controls for household and similar use; part 2: particular requirements for automatic electrical pressure sensing controls including mechanical requirements

Danish Standards Foundation, How does the power supply control the voltage

DS/EN 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers
DS/EN 62386-205:2010 Digital addressable lighting interface - Part 205: Particular requirement for control gear - Supply voltage controller for incandescent lamps (device type 4)
DS/EN 50525-2-51:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-51: Cables for general applications - Oil resistant control cables with thermoplastic PVC insulation
DS/EN 60654-2:1998 Operating conditions for industrial process measurement and control equipment - Part 2: Power
DS/EN 62271-206:2011 High-voltage switchgear and controlgear - Part 206: Voltage presence indicating systems for rated voltages above 1 kV and up to and including 52 kV
DS/EN 60947-8/A1:2007 Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
DS/EN 60947-8:2004 Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
DS/EN 60947-8/A2:2012 Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How does the power supply control the voltage

GB/T 19212.3-2012 Safety of power transformers, power supplies, reactors and similar products - Part 3: Particular requirements and tests for control transformers and power supplies incorporating control transformers
GB 19212.3-2012 Safety of power transformers,power supplies,reactors and similar products.Part 3:Particular requirements and tests for control transformers and power supplies incorporating control transformers
GB 19212.3-2006 Safety of power transformers, power supply units and similar. Part 3: Particular requirements for control transformers
GB/T 30104.205-2013 Digital addressable lighting interface.Part 205:Particular requirements for control gear.Supply voltage controller for incandescent lamps (device type 4)
GB/T 42290-2022 Code for analysis and control of airborne radioactive source items in pressurized water reactor nuclear power plants
GB/T 17490-1998 Hydraulic fluid power--Identification of valve ports, subplates, control devices and solenoids
GB 14536.7-2010 Automatic electrical controls for household and similar use.Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
GB/T 14536.7-2010 Automatic electrical controls for household and similar use.Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
GB 14536.7-1996 Automatic electrical controls for household and similar use.Particular requirements automatic electrical pressure sensing controls including mechanical requirements
GB/T 14048.14-2006 Low voltage switchgear and controlgear Part 5-3: Control circuit devices and switching elements Electrical emergency stop device with mechanical latching function

Association Francaise de Normalisation, How does the power supply control the voltage

NF EN 61558-2-2:2007 Sécurité des transformateurs, alimentations, bobines d'inductance et produits analogues - Partie 2-2 : règles particulières et essais pour les transformateurs de commande et les alimentations incorporant les transformateurs de commande
NF C52-558-2-2*NF EN 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-2 : particular requirements and tests for control transformers and power supplies incorporating control transformers
NF C71-128*NF EN IEC 63128:2019 Lighting control interface for dimming - Analogue voltage dimming interface for electronic current sourcing controlgear
NF Z87-132-3:2003 Environmental Engineering (EE) - Power supply interface at the input to telecommunications equipment - Part 3 : operated by rectified current source, alternating current source or direct current source up to 400 V (v1.2.1).
NF E48-440-3:2008 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 3 : test methods for pressure control valves.
NF C71-386-205*NF EN 62386-205:2010 Digital addressable lighting interface - Part 205 : particular requirements for control gear - Supply voltage controller for incandescent lamps (device type 4)
NF E48-440-3*NF ISO 10770-3:2020 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 3 : test methods for pressure control valves
NF C71-442-2*NF EN IEC 62442-2:2022 Energy performance of lamp controlgear - Part 2 : controlgear for discharge lamps (excluding low-pressure mercury fluorescent lamps) - Method of measurement to determine the efficiency of controlgear
NF E48-440-2*NF ISO 10770-2:2013 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 2 : test methods for three-port directional flow-control valves
NF Z87-132-3-0:2012 Environmental Engineering (EE) - Power supply interface at the input to telecommunications and datacom (ICT) equipment - Part 3 : operated by rectified current source, alternating current source or direct current source up to 400 V - Sub-part 0 : overview
NF C32-525-2-51*NF EN 50525-2-51:2012 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-51 : cables for general applications - Oil resistant control cables with thermoplastic PVC insulation
NF C71-247-2:2001 Lamp controlgear - Part 2-2 : particular requirements for d.c. or a.c. supplied electronic step-down convectors for filament lamps.
NF C63-141:1985 Control switches. (low-voltage switching-devices for control and auxiliary circuits, including contactor relays). Part 2 : special requirements for specific types of control switches.
NF E48-440-1*NF ISO 10770-1:2009 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 1 : test methods for four-port directional flow-control valves
NF C71-305*NF EN 62384:2006 D.C. or A.C. supplied electronic control gear for LED modules - Performance requirements.
NF EN 62386-205:2010 Interface d'éclairage adressable numérique - Partie 205 : exigences particulières pour les appareillages de commande - Variateur de tension d'alimentation pour les lampes à incandescence (dispositifs de type 4)
NF EN IEC 62442-2:2022 Performance énergétique des appareillages de lampes - Partie 2 : appareillages des lampes à décharge (à l'exclusion des lampes à fluorescence à vapeur de mercure à basse pression) - Méthode de mesurage pour la détermination du rendement des ...
NF C47-736*NF EN 60730-2-6:2016 Automatic electrical controls - Part 2-6 : particular requirements for automatic electrical pressure sensing controls including mechanical requirements
NF C47-736/A1*NF EN 60730-2-6/A1:2020 Automatic electrical controls - Part 2-6 : particular requirements for automatic electrical pressure sensing controls including mechanical requirements
NF EN IEC 62271-209/A1:2022 Appareillage à haute tension - Partie 209 : Raccordement de câbles pour appareillage sous enveloppe métallique à isolation gazeuse de tension assignée supérieure à 52 kV - Câbles remplis d'un fluide ou à isolation extrudée - Extrémité de c...
NF EN IEC 62271-209:2019 Appareillage à haute tension - Partie 209 : raccordement de câbles pour appareillage sous enveloppe métallique à isolation gazeuse de tension assignée supérieure à 52 kV - Câbles remplis d'un fluide ou à isolation extrudée - Extrémité de c...
NF EN IEC 62442-1:2022 Performance énergétique des appareillages de lampes - Partie 1 : appareillages des lampes à fluorescence - Méthode de mesurage pour la détermination de la puissance d'entrée totale des circuits d'appareillage et du rendement des appareillages
NF EN IEC 63128:2019 Interface de commande d'éclairage pour variation d'intensité - Interface de variation de tension analogique pour appareillage d'alimentation électronique
NF C63-430:2004 Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards.
NF EN 60730-2-6/A1:2020 Dispositifs de commande électrique automatiques - Partie 2-6 : exigences particulières pour les dispositifs de commande électrique automatiques sensibles à la pression y compris les exigences mécaniques
NF EN 60730-2-6:2016 Dispositifs de commande électrique automatiques Partie 2-6 : exigences particulières pour les dispositifs de commande électrique automatiques sensibles à la pression y compris les exigences mécaniques
NF C71-442-1:2013 Energy performance of lamp controlgear - Part 1: controlgear for fluorescent lamps - Method of measurement to dertermine the total input power of controlgear circuits and the efficiency of the controlgear
NF C71-442-2:2014 Energy performance of lamp controlgear - Part 2 : controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear
NF EN 60654-2:1997 Conditions de fonctionnement pour les matériels de mesure et commande dans les processus industriels - Partie 2 : alimentation
NF C71-247-11*NF EN 61347-2-11:2002 Lamp controlgear - Part 2-11 : particular requirements for miscellaneous electronic circuits used with luminaires
NF C64-471-107*NF EN IEC 62271-107:2019 High-voltage switchgear and controlgear - Part 107 : alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV
NF C42-020-2-033*NF EN IEC 61010-2-033:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033 : particular requirements for hand-held multimeters for domestic and professional use, capable of measuring mains voltage
NF C42-020-2-033/A11*NF EN IEC 61010-2-033/A11:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033 : particular requirements for hand-held multimeters for domestic and professional use, capable of measuring mains voltage
NF C63-140:1985 Control switches. (low-voltage switching-devices for control and auxiliary circuits, including contactor relays). Part 1. Section 1 : general requirements.
NF EN 2358:1989 Embouts à oeil en acier résistant à la corrosion à sertir sur câbles de commandes - Dimensions et charges
NF EN 62271-201:2014 Appareillage à haute tension - Partie 201 : appareillage sous enveloppe isolante pour courant alternatif de tensions assignées supérieures à 1 kV et inférieures ou égales à 52 kV
NF EN IEC 60947-5-8:2021 Appareillage à basse tension - Partie 5-8 : appareils et éléments de commutation pour circuits de commande - Interrupteurs de commande de validation à trois positions
NF C64-471-107:2006 High Voltage switchgear and controlgear - Part 107 : alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV.
NF C63-068/A1*NF EN 60947-8/A1:2007 Low-voltage switchgear and controlgear - Part 8 : control units for built-in thermal protection (PTC) for rotating electrical machines.
NF C64-471-106*NF EN 62271-106:2012 High-voltage switchgear and controlgear - Part 106 : alternating current contactors, contactor-based controllers and motor-starters.
NF EN IEC 62271-212:2022 Appareillage à haute tension - Partie 212 : Ensemble compact d'équipement pour poste de distribution (ECEPD) pour les tensions alternatives inférieures ou égales à 52 kV
NF C64-471-214*NF EN IEC 62271-214:2019 High-voltage switchgear and controlgear - Part 214 : internal arc classification for metal-enclosed pole-mounted switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
NF EN 50525-2-51:2012 Câbles électriques - Câbles d'énergie basse tension de tension assignée au plus égale à 450/750 V (U0/U) - Partie 2-51 : câbles pour applications générales - Câbles de contrôle résistants à l'huile, isolés en PVC thermoplastique
NF EN 60947-8/A2:2012 Appareillage à basse tension - Partie 8 : unités de commande pour la protection thermique incorporée (CTP) aux machines électriques tournantes
NF EN 60947-8/A1:2007 Appareillage à basse tension - Partie 8 : unités de commande pour la protection thermique incorporée (CTP) aux machines électriques tournantes
NF EN IEC 60947-8:2023 Appareillage à basse tension - Partie 8 : unités de commande pour la protection thermique incorporée (CTP) aux machines électriques tournantes
NF EN 62271-205:2008 Appareillage à haute tension - Partie 205 : ensembles d'appareillages compacts de tensions assignées supérieures à 52 kV
NF C47-736:2008 Automatic electrical controls for household and similar use - Part 2-6 : particular requirements for automatic electrical pressure sensing controls including mechanical requirements.

European Committee for Electrotechnical Standardization（CENELEC）, How does the power supply control the voltage

EN IEC 63128:2019 Lighting control interface for dimming - Analogue voltage dimming interface for electronic current sourcing controlgear
EN 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers
EN 61439-2:2009 Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies (Remains Current)
EN 62386-205:2009 Digital addressable lighting interface - Part 205: Particular requirements for control gear - Supply voltage controller for incandescent lamps (device type 4)
HD 420-1982 Control Switches (Low Voltage-Devices for Control and Auxiliary Circuits, Including Contactor Relays)
HD 420 S2-1988 Control Switches (Low Voltage Switching - Devices for Control and Auxiliary Circuit, Including Contactor Relays)
EN 50362:2003 Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits
EN IEC 61225:2020 Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for static uninterruptible DC and AC power supply systems
EN 62442-2:2014 Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear
EN 50187:2022 High-voltage switchgear and controlgear - Gas-filled compartments of AC switchgear and controlgear with rated voltages above 1 kV up to and including 52 kV
EN IEC 62271-214:2019 High-voltage switchgear and controlgear - Part 214: Internal arc classification for metal-enclosed pole-mounted switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
EN IEC 61010-2-033:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters for domestic and professional use, capable of measuring mains voltage
EN 62271-206:2011 High-voltage switchgear and controlgear - Part 206: Voltage presence indicating systems for rated voltages above 1 kV and up to and including 52 kV
EN IEC 60947-8:202X/prAA Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
EN IEC 62271-212:2022 High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) for AC voltages up to 52 kV

National Fire Protection Association (NFPA), How does the power supply control the voltage

NFPA FPH SECTION 6-2-2003 Control of Electrostatic Ignition Sources
NFPA FPH SECTION 10-8-2003 Power Supplies and Controllers for Motor-Driven Fire Pumps

British Standards Institution (BSI), How does the power supply control the voltage

BS 5251:1975 Specification for analogue voltage ranges and logic levels for mains operated nuclear instruments
BS EN IEC 63128:2019 Lighting control interface for dimming. Analogue voltage dimming interface for electronic current sourcing controlgear
22/30466098 DC BS IEC 63128:2019 AMD1. Lighting control interface for dimming. Analogue voltage dimming interface for electronic current sourcing controlgear
BS EN 62386-205:2010 Digital addressable lighting interface. Particular requirements for control gear. Supply voltage controller for incandescent lamps (device type 4)
BS EN 62386-205:2009 Digital addressable lighting interface - Particular requirements for control gear - Supply voltage controller for incandescent lamps (device type 4)
BS EN 50525-2-51:2011 Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U). Cables for general applications. Oil resistant control cables with thermoplastic PVC insulation
22/30454700 DC BS EN IEC 61347-2-13. Controlgear for electric light sources. Safety - Part 2-13. Particular requirements for electronic controlgear for LED light sources
BS ISO 10770-1:2009 Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for four-port directional flow-control valves
BS ISO 10770-3:2007 Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for pressure control valves
BS ISO 10770-3:2020 Tracked Changes. Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for pressure control valves
BS EN 61439-2:2009 Low-voltage switchgear and controlgear assemblies - Power switchgear and controlgear assemblies
BS EN 61439-2:2011 Low-voltage switchgear and controlgear assemblies. Power switchgear and controlgear assemblies
BS EN 61439-2:2010 Low-voltage switchgear and controlgear assemblies. Power switchgear and controlgear assemblies
BS EN IEC 62442-2:2022 Tracked Changes. Energy performance of lamp controlgear. Controlgear for discharge lamps (excluding low-pressure mercury fluorescent lamps). Method of measurement to determine the efficiency of controlgear
BS EN 60730-2-6:2016 Tracked Changes. Automatic electrical controls. Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
PD IEC TR 63434:2023 Low voltage switchgear and controlgear. Partial discharge voltages and PD-level in low voltage switchgear and controlgear
BS EN 61347-2-7:2012+A2:2022 Lamp controlgear - Particular requirements for electric source for safety services (ESSS) supplied electronic controlgear for emergency lighting (self-contained)
BS EN 60730-2-6:2016+A1:2020 Automatic electrical controls - Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
BS EN 50362:2003 Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits
DD IEC/TS 61994-1:2007 Piezoelectric and dielectric devices for frequency control and selection. Glossary - Piezoelectric and dielectric resonators
BS EN 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products - Particular requirements and tests for control transformers and power supplies incorporating control transformers
BS EN 62384:2006 D.C. or A.C. supplied electronic control gear for LED modules - Performance requirements
BS ISO 10770-2:2012 Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for three-port directional flow-control valves
BS 842:1965 Specification for a.c. voltage-operated earth-leakage circuit breakers
DD IEC/TS 61994-4-2:2011 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection. Glossary - Piezoelectric and dielectric materials. Piezoelectric ceramics
BS EN 61558-2-2:1998 Safety of power transformers, power supply units and similar - Particular requirements for control transformers
BS EN 62442-1:2011 Energy performance of lamp controlgear. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
BS EN 62442-1:2012 Energy performance of lamp controlgear. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
BS EN IEC 62442-2:2018 Energy performance of lamp controlgear. Controlgear for high intensity discharge lamps (excluding fluorescent lamps). Method of measurement to determine the efficiency of controlgear
BS EN IEC 61225:2020 Nuclear power plants. Instrumentation, control and electrical power systems. Requirements for static uninterruptible DC and AC power supply systems
20/30424112 DC BS EN IEC 61347-2-2. Controlgear for electric light sources. Part 2-2. Particular requirements for DC or AC supplied electronic step-down convertors for filament lamps
BS EN 60335-2-77:2001 Specification for safety of household and similar electrical appliances - Particular requirements for pedestrian controlled mains-operated lawn-mowers
BS EN 62442-2:2014 Energy performance of lamp controlgear. Controlgear for high intensity discharge lamps (excluding fluorescent lamps) Method of measurement to determine the efficiency of the controlgear
BS EN 62271-2:2003 High-voltage switchgear and controlgear - Seismic qualification for rated voltages of 72,5 kV and above
BS EN 62271-212:2022 High-voltage switchgear and controlgear - Compact Equipment Assembly for Distribution Substation (CEADS) for AC voltages up to 52 kV
18/30377627 DC BS EN IEC 60730-2-6 AMD1. Automatic electrical controls. Part 2-6. Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
BS EN 60335-2-77:2010 Safety of household and similar appliances. Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers
BS EN IEC 62442-1:2018 Tracked Changes. Energy performance of lamp controlgear. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
BS EN IEC 62442-1:2022 Tracked Changes. Energy performance of lamp controlgear. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
22/30454699 DC BS EN IEC 61347-2-2. Controlgear for electric light sources. Safety - Part 2-2. Particular requirements for DC or AC supplied electronic step-down convertors for filament lamps
PD IEC TS 61994-5:2019 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection. Glossary. Piezoelectric sensors
BS EN 50300:2004 Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards
PD IEC TS 61994-3:2021 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection. Glossary. Piezoelectric, dielectric and electrostatic oscillators
DD IEC/TS 61994-2:2011 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection. Glossary - Piezoelectric and dielectric filters
BS 6867:2013 Maintenance of electrical switchgear and controlgear for voltages above 36 kV. Code of practice
DD IEC/TS 61994-4-3:2008 Piezoelectric and dielectric devices for frequency control and selection. Glossary - Materials. Materials for dielectric devices
BS EN IEC 62271-214:2019 High-voltage switchgear and controlgear. Internal arc classification for metal-enclosed pole-mounted switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
PD IEC TS 62786-41:2023 Distributed energy resources connection with the grid. Requirements for frequency measurement used to control distributed energy resources (DER) and loads
BS EN IEC 61010-2-033:2021+A11:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Particular requirements for hand-held multimeters and other meters for domestic and professional use, capable of measuring mains voltage
BS EN 61010-2-033:2012 Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage
23/30469012 DC BS EN IEC 61225. Nuclear power plants. Instrumentation, control and electrical power systems. Requirements for static uninterruptible DC and AC power supply systems
BS ISO 7176-14:2022 Tracked Changes. Wheelchairs. Power and control systems for electrically powered wheelchairs and scooters. Requirements and test methods
BS IEC 1000-3-5:1995 Electromagnetic compatibility (EMC) - Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A
BS EN 62271-108:2006 High-voltage switchgear and controlgear - High-voltage alternating current disconnecting circuit-breakers for rated voltages of 72,5 kV and above
20/30427819 DC BS EN IEC 62442-1. Energy performance of lamp controlgear. Part 1. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
17/30332825 DC BS EN 62442-1 AMD11. Energy performance of lamp controlgear. Part 1. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
BS EN 60439-5:2006 Low-voltage switchgear and controlgear assemblies - Particular requirements for assemblies for power distribution in public networks
21/30432207 DC BS EN 12098-3. Energy performance of buildings. Controls for heating systems. Part 3. Control equipment for electrical heating systems. Modules M3-5,6,7,8
BS EN 62271-206:2011 High-voltage switchgear and controlgear. Voltage presence indicating systems for rated voltages above 1 kV and up to and including 52 kVkV and up to and including 52 kV
BS EN IEC 62271-104:2020 High-voltage switchgear and controlgear - Alternating current switches for rated voltages higher than 52 kV
BS EN ISO 4126-4:2004 Safety devices for protection against excessive pressure - Part 4:Pilot operated safety valves
BS 5630:1978 Specification for interface dimensions of snap-on connections for use with electrically controlled hydraulic equipment
BS 6423:1983 Code of practice for maintenance of electrical switchgear and controlgear for voltages up to and including 1 kV
20/30424117 DC BS EN IEC 61347-2-11. Controlgear for electric light sources. Part 2-11. Particular requirements for miscellaneous electronic circuits used with luminaires
BS EN IEC 62271-213:2021 High-voltage switchgear and controlgear. Alternating current contactors, contactor-based controllers and motor-starters
BS EN IEC 62271-106:2021 High-voltage switchgear and controlgear. Alternating current contactors, contactor-based controllers and motor-starters
BS 6626:1985 Code of practice for maintenance of electrical switchgear and controlgear for voltages above l kV and up to and including 36 kV
BS EN 62271-104:2015 High-voltage switchgear and controlgear. Alternating current switches for rated voltages higher than 52 kV
PD IEC TS 60079-42:2019 Explosive atmospheres. Electrical Safety Devices for the control of potential ignition sources from Ex-Equipment
BS 5863-2:1980 Analogue signals for process control systems. Specification for direct voltage signals
20/30427823 DC BS EN IEC 62442-2. Energy performance of lamp controlgear. Part 2. Controlgear for high intensity discharge lamps (excluding fluorescent lamps). Method of measurement to determine the efficiency of controlgear
BS EN 60947-5-5:1998+A2:2017 Low-voltage switchgear and controlgear. Control circuit devices and switching elements. Electrical emergency stop device with mechanical latching function
BS EN 60947-5-5:1998 Low-voltage switchgear and controlgear. Control circuit devices and switching elements. Electrical emergency stop devices with mechanical latching function
BS EN 60034-18-41:2014 Rotating electrical machines. Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters. Qualification and quality control tests

German Institute for Standardization, How does the power supply control the voltage

DIN EN 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers (IEC 61558-2-2:2007); German version EN 61558-2-2:2007
DIN 40030:1993-09 Rated voltages of DC-motors directly fed by controlled static power convertors from AC-power systems
DIN 47609:2013-08 Outdoor enclosure for non-weather protected locations in telecommunication, signalling, traffic control systems and low-voltage power supply - Requirements and tests / Note: Date of issue 2013-08-19*Intended as replacement for DIN 47609 (1989-07).
DIN 47609:2023-11 Outdoor enclosure for non-weather protected locations in telecommunication, signalling, traffic control systems and low-voltage power supply - Requirements and tests
DIN 3163:1974 Control through valves for refrigerant circuits, nominal pressure 25 bar
DIN EN 62384:2007 DC or AC supplied electronic control gear for LED modules - Performance requirements (IEC 62384:2006); German version EN 62384:2006
DIN VDE 0670-402:1988 A.c. switchgear and controlgear for voltages above 1 kV; application guide for the selection of fuse-links for transformer circuits
DIN 18232-9:2021 Smoke and heat control systems - Part 9: Minimum values for power supplies according to DIN EN 12101-10 and control equipment according to ISO 21927-9
DIN EN 62386-205:2010 Digital addressable lighting interface - Part 205: Particular requirements for control gear - Supply voltage controller for incandescent lamps (device type 4) (IEC 62386-205:2009); German version EN 62386-205:2009
DIN IEC 60946:1991 Binary direct voltage signals for process measurement and control systems; identical with IEC 60946:1988
DIN EN 50525-2-51:2012 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U<(Index)0>/U) - Part 2-51: Cables for general applications - Oil resistant control cables with thermoplastic PVC insulation; German version EN 50525-2-51:2011
DIN EN 60654-2:1998-08 Operating conditions for industrial-process measurement and control equipment - Part 2: Power (IEC 60654-2:1979 + A1:1992); German version EN 60654-2:1997
DIN EN 62384:2010 DC or AC supplied electronic control gear for LED modules - Performance requirements (IEC 62384:2006 + A1:2009); German version EN 62384:2006 + A1:2009
DIN IEC/TS 61994-4-2:2012-05*DIN SPEC 41994-4-2:2012-05 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-2: Piezoelectric and dielectric materials - Piezoelectric ceramics (IEC/TS 61994-4-2:2011)
DIN 43460:1998-10 Contact occupation of plug connectors - Circuit breakers, rated voltage < 52 kV - Coordination of auxiliary and control-circuits
DIN IEC 61225:2017 Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for static uninterruptible DC and AC power supply systems (IEC 45A/1138/CD:2017)
DIN EN 12098-3:2021-09 Energy performance of buildings - Controls for heating systems - Part 3: Control equipment for electrical heating systems - Modules M3-5,6,7,8; German and English version prEN 12098-3:2021 / Note: Date of issue 2021-08-13*Intended as replacement for DI...
DIN IEC/TS 61994-2:2012-04*DIN SPEC 41994-2:2012-04 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 2: Piezoelectric and dielectric filters (IEC/TS 61994-2:2011)
DIN IEC/TS 61994-3:2012-04*DIN SPEC 41994-3:2012-04 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 3: Piezoelectric and dielectric oscillators (IEC/TS 61994-3:2011)
DIN 43460:1998 Contact occupation of plug connectors - Circuit breakers, rated voltage 52 kV - Coordination of auxiliary and control-circuits

ES-UNE, How does the power supply control the voltage

UNE-EN IEC 63128:2019 Lighting control interface for dimming - Analogue voltage dimming interface for electronic current sourcing controlgear (Endorsed by Asociación Española de Normalización in August of 2019.)
UNE-EN IEC 62442-2:2022 Energy performance of lamp controlgear - Part 2: Controlgear for discharge lamps (excluding low-pressure mercury fluorescent lamps) - Method of measurement to determine the efficiency of controlgear (Endorsed by Asociación Española de Normalización ...
UNE-EN 62386-205:2009 Digital addressable lighting interface -- Part 205: Particular requirements for control gear - Supply voltage controller for incandescent lamps (device type 4) (Endorsed by AENOR in April of 2010.)
UNE-EN 61347-2-7:2012/A2:2022 Lamp controlgear - Part 2-7: Particular requirements for electric source for safety services (ESSS) supplied electronic controlgear for emergency lighting (self-contained)
UNE-EN IEC 61225:2020 Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for static uninterruptible DC and AC power supply systems (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN 60730-2-6:2016/A1:2021 Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
UNE-EN 60730-2-6:2016 Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
UNE-EN IEC 62442-1:2019 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
UNE-EN IEC 62442-1:2022 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear (Endorsed by Asociación Española de Normalización...
UNE-EN IEC 62442-2:2019 Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear
IEEE C37.11-2022 IEEE Standard Requirements for Electrical Control for AC High-Voltage (> 1000 V) Circuit Breakers
UNE-EN IEC 61010-2-033:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters for domestic and professional use, capable of measuring mains voltage (Endorsed by Asociación Esp...
UNE-EN IEC 61010-2-033:2021/A11:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters for domestic and professional use, capable of measuring mains voltage (Endorsed by Asociación Esp...
UNE-EN IEC 62271-212:2023 High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) for AC voltages up to 52 kV
UNE-EN 12098-3:2018 Energy Performance of Buildings - Controls for heating systems - Part 3: Control equipment for electrical heating systems - Modules M3-5,6,7,8
UNE-EN 12098-3:2023 Energy Performance of Buildings - Controls for heating systems - Part 3: Control equipment for electrical heating systems - Modules M3-5,6,7,8
UNE-EN 50187:2023 High-voltage switchgear and controlgear - Gas-filled compartments of AC switchgear and controlgear with rated voltages above 1 kV up to and including 52 kV

Lithuanian Standards Office , How does the power supply control the voltage

LST EN 61558-2-2-2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers (IEC 61558-2-2:2007)
LST EN 62386-205-2010 Digital addressable lighting interface -- Part 205: Particular requirements for control gear - Supply voltage controller for incandescent lamps (device type 4) (IEC 62386-205:2009)
LST EN 50525-2-51-2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) -- Part 2-51: Cables for general applications - Oil resistant control cables with thermoplastic PVC insulation
LST EN 62442-1-2012 Energy performance of lamp controlgear -- Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear (IEC 62442-1:2011)
LST HD 557 S1-2002 Binary direct voltage signals for process measurement and control systems (IEC 60946:1988)

AENOR, How does the power supply control the voltage

UNE-EN 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products -- Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers (IEC 61558-2-2:2007).
UNE-EN 50525-2-51:2012 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) -- Part 2-51: Cables for general applications - Oil resistant control cables with thermoplastic PVC insulation
UNE 21302-561:1992 ELECTROTECHNICAL VOCABULARY. PIEZOELECTRIC DEVICES FOR FREQUENCY CONTROL AND SELECTION.
UNE 201003:2005 Enclosures and compartments of enclosures for the installation of the Power Control Switch.
UNE 21302-561/1M:2001 Electrotechnical vocabulary. Chapter 561: Piezoelectric devices for frequency control and selection.
UNE 20836:1992 BINARY DIRECT VOLTAGE SIGNALS FOR PROCESS MEASUREMENT AND CONTROL SYSTEMS.
UNE-EN 60654-2:1999 OPERATING CONDITIONS FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL EQUIPMENT. PART 2: POWER
UNE-EN 62442-2:2014/A11:2017 Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear
UNE-EN 62442-2:2014 Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear
UNE-EN 62271-206:2011 High-voltage switchgear and controlgear - Part 206: Voltage presence indicating systems for rated voltages above 1 kV and up to and including 52 kV
UNE 20800-2:1986 ANALOGUE SIGNALS FOR PROCESS CONTROL SYSTEMS. PART 2: DIRECT VOLTAGE SIGNALS
UNE-EN 60947-8:2005/A2:2013 Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines

Professional Standard - Energy, How does the power supply control the voltage

NB/T 20583-2021 Technical Guidelines for Loss of Control Power Supply Test in Pressurized Water Reactor Nuclear Power Plant
NB/T 20031-2010 Control of hydrogen concentration in the containment after accidents in nuclear power plants of pressurized water reactor

Japanese Industrial Standards Committee (JISC), How does the power supply control the voltage

JIS C 61558-2-2:2012 Safety of power transformers, power supplies, reactors and similar products -- Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers
JIS C 61558-2-2:2008 Safety of power transformers, power supply units and similar -- Part 2-2: Particular requirements for control transformers
JIS B 8659-3:2015 Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 3: Test methods for pressure control valves
JIS B 8659-1:2013 Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 1: Test methods for four-port directional flow-control valves
JIS B 8659-1:2000 Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 1: Test methods for four-way directional flow control valves
JIS B 8659-2:2002 Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 2: Test methods for three-way directional flow control valves
JIS B 8659-2:2017 Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 2: Test methods for three-port directional flow-control valves
JIS C 9730-2-6:2010 Automatic electrical controls for household and similar use -- Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

Professional Standard - Electricity, How does the power supply control the voltage

DL/T 2563-2022 Distributed energy automatic generation control and automatic voltage control system test technical specification

Korean Agency for Technology and Standards (KATS), How does the power supply control the voltage

KS C IEC 61558-2-12-2017(2022) Safety of Transforemers, Reactors, Power supply units and combination thereof — Part 2-12: Particular requirements and tests for control voltage transformers and power supply units for constant voltag
KS C IEC 61439-2-2014(2019) Low-voltage switagar and controlgear assemblies ― Part2: Power switchgear and controlgear assemblies
KS C IEC 62386-205-2012(2022) Digital addressable lighting interface－Part 205：Particular requirements for control gear－Supply voltage controller for incandescent lamps(device type 4)
KS C IEC 62386-205-2012(2017) Digital addressable lighting interface－Part 205：Particular requirements for control gear－Supply voltage controller for incandescent lamps(device type 4)
KS C IEC 61225-2012(2022) Nuclear power plants－Instrumentation and control systems important to safety－Requirements for electrical supplies
KS C IEC 61225-2012(2017) Nuclear power plants－Instrumentation and control systems important to safety－Requirements for electrical supplies
KS B 6516-1991(2021) TEST METHODS FOR ELECTRONICALLY CONTROLLED OIL HYDRAULIC PUMPS
KS C 0704-1997 Insulation test for control gear
KS B ISO 10770-2:2002 Electrically modulated hydraulic control valves-Part 2:Test methods for three-way directional flow control valves
KS B ISO 10770-1:2003 Hydraulic fluid power-Electrically modulated hydraulic control valves-Part 1:Test methods for four-way directional flow control valves
KS B ISO 10770-2:2013 Electrically modulated hydraulic control valves－Part 2：Test methods for three-way directional flow control valves
KS B ISO 10770-1:2013 Hydraulic fluid power-Electrically modulated hydraulic control valves-Part 1:Test methods for four-way directional flow control valves
KS C IEC 62208:2009 Empty enclosures for low-voltage switchgear and controlgear assemblies－General requirements
KS C IEC 62208:2014 Empty enclosures for low-voltage switchgear and controlgear assemblies-General requirements
KS C IEC 60946:2005 Binary direct voltage signals for process measurement and control systems
KS C IEC 60946:2013 Binary direct voltage signals for process measurement and control systems
KS C IEC 62384:2011 DC or AC supplied electronic control gear for LED modules-Performance requirements
KS C IEC 61958:2009 High-voltage prefabricated switchgear and controlgear assemblies-Voltage presence indicating systems
KS C IEC 60730-2-6:2020 Automatic electrical controls — Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
KS C IEC 60946-2005(2010) Binary direct voltage signals for process measurement and control systems
KS C IEC 60654-2:2014 Operating conditions for industrial-process measurement and control equipment — Part 2: Power
KS C IEC 60654-2-2014(2019) Operating conditions for industrial-process measurement and control equipment — Part 2: Power
KS C IEC 61558-2-2:2002 Safety of power transformers, power supply units and similar devices－Part 2－2：Particular requirements for control transformers
KS C IEC 61558-2-2:2017 Safety of power transformers, power supply units and similar devices－Part 2－2：Particular requirements for control transformers
KS C IEC 61558-2-2-2017(2022) Safety of power transformers, power supply units and similar devices－Part 2－2：Particular requirements for control transformers
KS B ISO 9461:2007 Hydraulic fluid power-Identification of valve ports,subplates, control devices and solenoids
KS B ISO 9461:2013 Hydraulic fluid power－Identification of valve ports,subplates, control devices and solenoids
KS C IEC 60730-2-6:2002 Automatic electrical controls for household and similar use-Part 2-6:Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
KS C IEC 60730-2-6:2014 Automatic electrical controls for household and similar use — Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
KS B 8302-2021 Control device for connecting regeneration power of elevator and escalator system to grid — Part 1-1: Elevator —Measuring and testing method
KS C IEC 60439-3-2003(2013) Low-voltage switchgear and controlgear assemblies. Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have

Association of German Mechanical Engineers, How does the power supply control the voltage

DVS 2904-2010
VDI 2166 Blatt 1-2008 Electrical installations in buildings - Requirements from the energy controlling

European Committee for Standardization (CEN), How does the power supply control the voltage

HD 92 S1-1974 Specification for mains operated electric fence controllers
prEN 60730-2-6-1992 Automatic electrical controls for household and similar use; part 2: particular requirements for automatic electrical pressure sensing controls including mechanical requirements (IEC 730-2-6:1991, modified)
prEN 12098-3-2021 Energy performance of buildings - Controls for heating systems - Part 3: Control equipment for electrical heating systems - Modules M3-5,6,7,8

CZ-CSN, How does the power supply control the voltage

CSN ON 34 8823-1967
CSN EN 60947-5-1-2005
CSN IEC 946:1992 Binary direct voltage signals for process measurement and control systems
CSN 83 4752 Cast.3-1989 Air pollution control. Determination of fluorine emissions from stationary sources. Potenciometric method

Professional Standard - Environmental Protection, How does the power supply control the voltage

HJ/T 321-2006 Specifications for environmental protection product.Low-voltage control power supply for electrostatic precipitator

Indonesia Standards, How does the power supply control the voltage

SNI IEC 61439-2:2013

CENELEC - European Committee for Electrotechnical Standardization, How does the power supply control the voltage

EN 61558-2-2:1998 Safety of Power Transformers@ Power Supply Units and Similar Part 2.2: Particular Requirements for Control Transformers
EN IEC 62442-2:2018 Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear

AT-OVE/ON, How does the power supply control the voltage

OVE EN IEC 61558-2-2:2021 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-2: Particular requirements and tests for control transformers and power supply units incorporating control transformers (IEC 96/522/CDV) (english version)
OVE EN IEC 62442-2:2021 Energy performance of lamp controlgear - Part 2: Controlgear for discharge lamps (excluding low-pressure mercury fluorescent lamps) - Method of measurement to determine the efficiency of controlgear (IEC 34C/1530/CDV) (english version)
OVE EN IEC 62442-1:2021 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear (IEC 34C/1529/CDV) (english version)

国家市场监督管理总局、中国国家标准化管理委员会, How does the power supply control the voltage

GB/T 36956-2018 Testing of voltage sourced converter valve base control unit for high-voltage direct current power transmission using voltage sourced converters
GB/T 14048.14-2019 Low-voltage switchgear and controlgear—Part 5-5: Control circuit devices and switching elements—Electrical emergency stop device with mechanical latching function

RU-GOST R, How does the power supply control the voltage

GOST 28855-1990 Cathode-ray tubes for reception. Supply and driving voltages standards
GOST R 50924-1996 Electric-motor-driven wheelchairs. Method of control for determination of energy consumption
GOST 721-1977 Power supply systems, networks, sources,converters and receivers of electric energy. Rated voltages above 1000 V
GOST 28814-1990 Integrated circuits. Methods of measuring electrical parameters of puls voltage regulators operation circuits
GOST IEC 61347-2-2-2014 Lamp controlgear. Part 2-2. Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
GOST R IEC 61439-2-2012 Low-voltage switchgear and controlgear assemblies. Part 2. Power switchgear and controlgear assemblies
GOST 19138.2-1985 Triode thyristors. Method for measuring trigger direct and peak gate current and trigger direct and peak gate voltage
GOST 21106.5-1977 Oscillator, modulator and regulation tubes; anode dissipated power more than 25 W. Methods of measurement of filament current and voltage
GOST R 51527-1999 Electromagnetic compatibility of technical equipment. Stabilized power supplies, d.c.output. Conducted electromagnetic interference. Limits and test methods
GOST IEC 60730-2-6-2014 Automatic electrical controls for household and similar use. Part 2-6. Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

Underwriters Laboratories (UL), How does the power supply control the voltage

UL 347A BULLETIN-2011 UL Standard for Safety Outline of Investigation for Medium Voltage Power Conversion Controllers
UL 60947-5-1-2014 UL Standard for Safety Low-Voltage Switchgear and Controlgear �C Part 5-1: Control Circuit Devices and Switching Elements �C Electromechanical Control Circuit Devices (Third Edition)
UL 1277 BULLETIN-2002 UL Standard for Safety Electrical Power and Control Tray Cables with Optional Optical-Fiber Members
UL 1277 BULLETIN-2001 UL Standard for Safety Electrical Power and Control Tray Cables with Optional Optical-Fiber Members
UL 1277 BULLETIN-2015 UL Standard for Safety Electrical Power and Control Tray Cables with Optional Optical-Fiber Members
UL 60947-5-1 (ND)-2014 National Differences For UL 60947-5-1 Low-Voltage Switchgear and Controlgear - Part 5-1: Control Circuit Devices and Switching Elements - Electromechanical Control Circuit Devices (Third Edition)
UL 347B BULLETIN-2005 OUTLINE OF INVESTIGATION FOR MEDIUM VOLTAGE MOTOR CONTROLLERS@ UP TO 15KV
UL 347B BULLETIN-2008 OUTLINE OF INVESTIGATION FOR MEDIUM VOLTAGE MOTOR CONTROLLERS@ UP TO 15KV
UL 2196 BULLETIN-2023 UL Standard for Safety Fire Test for Circuit Integrity of Fire-Resistive Power, Instrumentation, Control and Data Cables
UL 1277-2010 UL Standard for Safety Electrical Power and Control Tray Cables with Optional Optical-Fiber Members (Fifth Edition)
UL 1277-2018 UL Standard for Safety Electrical Power and Control Tray Cables with Optional Optical-Fiber Members (Sixth Edition)
UL 1977 BULLETIN-2002 UL Standard for Safety for Component Connectors for Use in Data@ Signal@ Control and Power Applications
UL 1977 BULLETIN-2007 UL Standard for Safety for Component Connectors for Use in Data@ Signal@ Control and Power Applications
UL SUBJECT 347B-2005 OUTLINE OF INVESTIGATION FOR MEDIUM VOLTAGE MOTOR CONTROLLERS@ UP TO 15KV (Issue 1)
UL 6951 BULLETIN-2013 UL Standard for Safety FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR – PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS – ELECTROMECHANICAL CONTROL CIRCUIT DEVICES (COMMENTS DUE: MARCH 25@ 2013)
UL 6951 BULLETIN-2007 UL Standard for Safety FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR – PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS – ELECTROMECHANICAL CONTROL CIRCUIT DEVICES (COMMENTS DUE: October 08@ 2007)
UL 69 CRD-2013 UL Standard for Safety Electric-Fence Controllers - Section/Paragraph Reference: 4.3.1@ 10.4@ 36A@ 40.6 Subject: Direct Plug-In Supply Controllers (Edition 10: June 30@ 2009)
UL 1277 BULLETINS-2000 UL Standard for Safety Electrical Power and Control Tray Cables with Optional Optical-Fiber Members (05/24/2000 (10p); 02/25/2000 (22p))
UL 1277 BULLETINS-2003 UL Standard for Safety Electrical Power and Control Tray Cables with Optional Optical-Fiber Members (07/21/2003 (8p); 03/19/2003 (48p))
UL 60730-2-11 BULLETIN-2023 UL Standard for Safety Automatic Electrical Controls; Part 2: Particular Requirements for Energy Regulators

KR-KS, How does the power supply control the voltage

KS C IEC 61558-2-2-2017 Safety of power transformers, power supply units and similar devices－Part 2－2：Particular requirements for control transformers
KS C IEC 62208-2009 Empty enclosures for low-voltage switchgear and controlgear assemblies－General requirements
KS C IEC 60730-2-6-2020 Automatic electrical controls — Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
KS C IEC 61000-3-3-2014 Electromagnetic compatibility(EMC) — Part 3-3: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per

National Electrical Manufacturers Association（NEMA), How does the power supply control the voltage

NEMA WC 54-2001 Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test
NEMA WC 54-2013 Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test
NEMA DC 13-1979 Residential Controls-Line-Voltage Integrally Mounted Thermostats for Electric Heaters
NEMA ICS 2-2000 Industrial Control and Systems Controllers, Contactors and Overload Relays Rated 600 Volts (Incorporates Errata: March 2008)
NEMA ICS 15.1-2021 Instructions for the Handling, Installation, Operation, and Maintenance of Medium Voltage Electric Fire Pump Controllers Rated Not More Than 7200 V
NEMA ICS 5 ANNEX F-2002 Industrial Control and Systems: High Pressure Power Wash Test Procedure for Self-Contained Control-Circuit Devices (Annex F-2002)
NEMA ICS 2 PART 8-1996 CONTROLLERS, CONTACTORS, AND OVERLOAD RELAYS RATED NOT MORE THAN 2000 VOLTS AC OR 750 VOLTS DC, PART 8: DISCONNECT DEVICES FOR USE IN INDUSTRIAL CONTROL EQUIPMENT
NEMA ICS 15-2004 Instructions for the Handling, Installation, Operation and Maintenance of Electric Fire Pump Controllers Rated Not More Than 600V

American National Standards Institute （ANSI), How does the power supply control the voltage

ANSI/IEEE C57.13.1:2006 Field Testing of Relaying Current Transformers
ANSI/IEEE 1547.3:2007 Guide for Monitoring, Information Exchange, and Control of Distributed Resources Interconnected with Electric Power Systems
ANSI/IEEE 1242:1999 Guide for Specifying and Selecting Power, Control and Special Purpose Cable for Petroleum and Chemical Plants
ANSI/IEEE C37.11:1997 Standard Requirements for Electrical Control for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
ANSI/IEEE 1617:2007 Guide for Detection, Mitigation, and Control of Concentric Neutral Corrosion in Medium Voltage Underground Cables
ANSI/ICEA T-26-465-2013 Guide For Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test
ANSI/NEMA ICEAT-27-581-2008 Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test
ANSI/UL 60730-2-6-2013 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements

未注明发布机构, How does the power supply control the voltage

BS 7674:1993(1999)*IEC 1225:1993 Nuclear power plants — Instrumentation and control systems important for safety — Requirements for electrical supplies
BS 5126-4:1993(2011) Mining type flameproof supply and control units for use systems up to 1100 V — Part 4 : Specification for air - cooled transformers to power drilling machines
BS 5126-3:1993(2011) Mining type flameproof supply and control units for use on systems up to 1100 V — Part 3 : Specification for air - cooled lighting transformer units
BS 5126-2:1993(2011) Mining type flameproof supply and control units for use on systems up to 1100 V — Part 2 : Specification for circuit breaker units
BS 5126-1:1993(2011) Mining type flameproof supply and control units for use on systems up to 1100 V — Part 1 : Specification for direct - on - line motor starters
BS EN 12098-3:2022 Tracked Changes. Energy performance of buildings. Controls for heating systems. Control equipment for electrical heating systems. Modules M3-5,6,7,8

Group Standards of the People's Republic of China, How does the power supply control the voltage

T/CSEE 0080-2018 Technical specifications for reactive power configuration and voltage control of large-scale new energy external transmission and transmission system
T/QGCML 163-2021 Control device of hybrid active power dynamic filter in smart grid
T/CSEE 0081.22-2021 Unified power flow controller (UPFC) — Part 22：Technical specification for VSC

SAE - SAE International, How does the power supply control the voltage

SAE AMS2759/12B-2018 Gaseous Nitrocarburizing, Automatically Controlled by Potentials

Institute of Electrical and Electronics Engineers (IEEE), How does the power supply control the voltage

IEEE 532-2021 IEEE Guide for Selecting and Testing Jackets for Power, Instrumentation, and Control Cables
IEEE Std 532-2007 IEEE Guide for Selecting and Testing Jackets for Power, Instrumentation, and Control Cables - Redline
IEEE Std 532-2021 IEEE Guide for Selecting and Testing Jackets for Power, Instrumentation, and Control Cables - Redline
IEEE 518-1982 Guide for the installation of electrical equipment to minimize electrical noise inputs to controllers from external sources
IEEE PC57.148/D5, September 2019 IEEE Draft Standard for Control Cabinets for Power Transformers
IEEE Unapproved Draft Std PC57.148/D8, Feb 2010 IEEE Draft Standard for Control Cabinets for Power Transformers
IEEE PC57.148/D9, April, 2010 IEEE Draft Standard for Control Cabinets for Power Transformers
IEEE PC57.148/D8, July 2020 IEEE Draft Standard for Control Cabinets for Power Transformers
IEEE 1547.3-2007 Guide for Monitoring, Information Exchange, and Control of Distributed Resources Interconnected with Electric Power Systems
IEEE Std C37.11-2014 Requirements for Electrical Control for AC High-Voltage (>1000 V) Circuit Breakers
IEEE Std 428-1981 IEEE Standard Definitions and Requirements for Thyristor AC Power Controllers
P532/D2, April 2020 IEEE Draft Guide for Selecting and Testing Jackets for Power, Instrumentation, and Control Cables
IEEE Std 1242-2016 - Redline IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants - Redline
IEEE 525-1978 IEEE Guide for Selection and Installation of Control and Low-Voltage Cable Systems in Substations
IEEE Std 1621-2004 IEEE Standard for User Interface Elements in Power Control of Electronic Devices Employed in Office/Consumer Environments
IEEE PC37.11/D6.6, April 2013 IEEE Draft Standard Requirements for Electrical Control for AC High-Voltage (>1000V) Circuit Breakers
IEEE 1453-2022 IEEE Standard for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems
IEEE 1885-2022 IEEE Guide for Assessing, Measuring, and Verifying Volt-Var Control and Optimization on Distribution Systems
IEEE Std 1885-2022 IEEE Guide for Assessing, Measuring, and Verifying Volt-Var Control and Optimization on Distribution Systems
IEEE Std 1453-2004 (Adoption of CEI/IEC 61000-4-15:1997+A1:2003) IEEE Recommended Practice for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems
IEEE PC37.11/D1.4, February 2021 IEEE Draft Standard Requirements for Electrical Control for AC High-Voltage (>1000 V) Circuit Breakers
IEEE PC37.11/D2.0, August 2022 IEEE Draft Standard for Electrical Control for AC High-Voltage (>1000 V) Circuit Breakers
IEEE P1885/D003, April 2020 IEEE Draft Guide for Assessing, Measuring and Verifying Volt-Var Control Optimization on Distribution Systems
IEEE P1885/D004, December 2021 IEEE Draft Guide for Assessing, Measuring and Verifying Volt-Var Control Optimization on Distribution Systems
IEEE Std 1453-2004 IEEE Recommended Practice for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems
IEEE P1453/D4.1, May 2021 IEEE Draft Standard for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems
IEEE P1453/D5.1, February 2022 IEEE Draft Standard for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems
IEEE P1453/D5.0, December 2021 IEEE Draft Standard for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems
IEEE Std C37.11-1997 IEEE Standard Requirements for Electrical Control for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
IEEE 518-1977 IEEE Guide for the Installation of Electrical Equipment to Minimize Electrical Noise Inputs to Controllers from External Sources
IEEE Std 518-1982 IEEE Guide for the Installation of Electrical Equipment to Minimize Electrical Noise Inputs to Controllers from External Sources
IEEE Approved Draft Std P1547.3/D7, Feb 2007 IEEE Guide for Monitoring, Information Exchange, and Control of Distributed Resources Interconnected with Electric Power Systems
IEEE Std 1547.3-2007 IEEE Guide for Monitoring, Information Exchange, and Control of Distributed Resources Interconnected with Electric Power Systems
IEEE PC37.11/D2.1, October 2022 IEEE Approved Draft Standard for Electrical Control for AC High-Voltage (>1000 V) Circuit Breakers
IEEE PC37.11 IEEE Approved Draft Standard for Electrical Control for AC High-Voltage (>1000 V) Circuit Breakers

United States Navy, How does the power supply control the voltage

NAVY MIL-P-24175 (3)-1971 PANELS, POWER SUPPLY AND CONTROL FOR NAVIGATION LIGHTS, GENERAL SPECIFICATION FOR
NAVY MIL-P-24175 SUPP 1-1967 PANELS, POWER SUPPLY AND CONTROL FOR NAVIGATION LIGHTS, GENERAL SPECIFICATION FOR
NAVY MIL-P-24175-1967 PANELS, POWER SUPPLY AND CONTROL FOR NAVIGATION LIGHTS, GENERAL SPECIFICATION FOR
NAVY QPL-23761-QPD-2011 REGULATORS, VOLTAGE, AND CONTROL PANELS AIRCRAFT, DIRECT CURRENT GENERATOR, GENERAL SPECIFICATION FOR
NAVY MIL-R-23761 B NOTICE 1-1997 REGULATORS, VOLTAGE, AND CONTROL PANELS AIRCRAFT DIRECT CURRENT GENERATOR, GENERAL SPECIFICATION FOR
NAVY MIL-R-23761 B-1975 REGULATORS, VOLTAGE, AND CONTROL PANELS AIRCRAFT DIRECT CURRENT GENERATOR, GENERAL SPECIFICATION FOR
NAVY QPL-23761-17-2001 REGULATORS, VOLTAGE, AND CONTROL PANELS, AIRCRAFT, DIRECT CURRENT GENERATOR, GENERAL SPECIFICATION FOR
NAVY MIL-C-6026 B-1959 CONTROL UNIT, PRESSURE GENERATING, MANUALLY OPERATED, AIRCRAFT HYDRAULIC BRAKE SYSTEM

ISA - International Society of Automation, How does the power supply control the voltage

ISA 71.02-1991 Environmental Conditions for Process Measurement and Control Systems: Power

US-FCR, How does the power supply control the voltage

FCR COE ETN 80-10-1980 FACILITIES ENGINEERING MAINTENANCE AND REPAIR RELIABILITY OF CONTROL POWER

IT-UNI, How does the power supply control the voltage

UNI ISO 10770-3:2020 Hydraulic fluid power -- Electrically modulated hydraulic control valves - Part 3: Test methods for pressure control valves

HU-MSZT, How does the power supply control the voltage

International Organization for Standardization (ISO), How does the power supply control the voltage

ISO 10770-1:2009 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 1: Test methods for four-port directional flow-control valves
ISO 10770-1:1998 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 1: Test methods for four-way directional flow control valves
ISO 10770-2:1998 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 2: Test methods for three-way directional flow control valves
ISO 10770-2:2012 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 2: Test methods for three-port directional flow-control valves
ISO 10770-3:2007 Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 3: Test methods for pressure control valves
ISO 10770-3:2020 Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 3: Test methods for pressure control valves
ISO 9461:1992 Hydraulic fluid power; identification of valve ports, subplates, control devices and solenoids
ISO 25981:2020 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage
ISO 25981:2008 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage

GOSTR, How does the power supply control the voltage

GOST R 58585-2019 Mining equipment. General safety requirements for power supply and control systems
GOST R IEC 61439.2-2012 Low-voltage switchgear and controlgear assemblies. Part 2. Power switchgear and controlgear assemblies
GOST IEC 60730-2-6-2019 Automatic electrical controls. Part 2-6. Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

中国轻工总会, How does the power supply control the voltage

QB 2099.5-1995 Special requirements (including mechanical requirements) for pressure-sensitive controllers for electrical automatic controls for household and similar purposes

Professional Standard - Post and Telecommunication, How does the power supply control the voltage

YD/T 2321-2011 Technical requirements and testing methods for converting mode solar power controller for telecommunications

工业和信息化部, How does the power supply control the voltage

YD/T 2321-2020 Technical requirements and test methods for conversion-stabilized solar power controllers for communications

Canadian Standards Association (CSA), How does the power supply control the voltage

CSA E61558-2-2-03-CAN/CSA-2003 S閏urit?des transformateurs, blocs d碼limentation et analogues Partie 2-2: R鑗les particuli鑢es pour les transformateurs de commande premi鑢e 閐ition; CIE/IEC 61558-2-2:1997
CAN/CSA-E730-2-6-1994 Automatic electrical controls for household and similar use Part 2: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
CSA ISO/IEC 14543-3-5-08-CAN/CSA:2008 Information technology ?Home electronic system (HES) architecture ?Part 3-5: Media and media dependent layers ?Powerline for network based control of HES Class 1 First Edition

YU-JUS, How does the power supply control the voltage

JUS N.K5.054-1982 Low voltage control switches. Special requirements for contactor relays

BELST, How does the power supply control the voltage

STB 2463-2020 External power supplies. Energy efficiency. Requirements for power consumption at idle and average effective efficiency. Methods of control

US-CFR-file, How does the power supply control the voltage

CFR 40-60.5417-2013 Protection of Environment. Part60:Standards of performance for new stationary sources. Section60.5417:What are the continuous control device monitoring requirements for my storage vessel or centrifugal compressor affected facility?

SE-SIS, How does the power supply control the voltage

SIS SS 424 03 23-1987 Control cables with rated voltage 150/250 V, type FKAR - PVC-lnsulated, PVC-sheathed control cables for electronic equipment - Design and testing
SIS SS-IEC 129:1990 High-voltage switchgear and controlgear — A.C. disconnectors and earthing switches for voltages above 1 kV

CU-NC, How does the power supply control the voltage

NC 59-04-07-1984 Nationai Electroíechnical Vocabulary. Electronic Elements and Components. Piezoelectric Devices for Control and Selection of Frequencies

IEC - International Electrotechnical Commission, How does the power supply control the voltage

TS 61994-3-2004 Piezoelectric and dielectric devices for frequency control and selection Glossary Part 3: Piezoelectric and dielectric oscillators (Edition 1.0)
TS 61994-1-2007 Piezoelectric and dielectric devices for frequency control and selection – Glossary – Part 1: Piezoelectric and dielectric resonators (Edition 2.0)
IEC 62442-2:2018 Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear (Edition 2.0)
TS 61994-3-2011 Piezoelectric@ dielectric and electrostatic devices and associated materials for frequency control@ selection and detection – Glossary – Part 3: Piezoelectric and dielectric oscillators (Edition 2.0)
TS 61994-5-2019 Piezoelectric@ dielectric and electrostatic devices and associated materials for frequency control@ selection and detection – Glossary – Part 5: Piezoelectric sensors (Edition 1.0)
TS 61994-4-1-2007 Piezoelectric and dielectric devices for frequency control and selection – Glossary – Part 4-1: Piezoelectric materials – Synthetic quartz crystal (Edition 2.0)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., How does the power supply control the voltage

IEEE C37.11-1979 REQUIREMENTS FOR ELECTRICAL CONTROL FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS OR A TOTAL CURRENT BASIS
IEEE 87-1961 Proposed Recommended Practice for MEDIUM-VOLTAGE MOTOR CONTROLLERS for Rubber and Plastics Industries
IEEE 789-1988 Standard Performance Requirements for Communications and Control Cables for Application in High Voltage Environments
IEEE 789-2013 Standard Performance Requirements for Communications and Control Cables for Application in High-Voltage Environments
IEEE 336-2005 Guide for Installation@ Inspection@ and Testing for Class 1E Power@ Instrumentation@ and Control Equipment at Nuclear Facilities

IN-BIS, How does the power supply control the voltage

Standard Association of Australia （SAA）, How does the power supply control the voltage

AS/NZS IEC 60947.8:2015
AS/NZS IEC 60947.5.5:2015
AS/NZS 3947.5.5:2000 Low-voltage switchgear and controlgear - Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function

NEMA - National Electrical Manufacturers Association, How does the power supply control the voltage

NEMA ICS 15.1-2012 Instructions for the Handling@ Installation@ Operation@ and Maintenance of Medium Voltage Electric Fire Pump Controllers Rated Not More Than 7200V
NEMA ICS 2.8-1996 CONTROLLERS@ CONTACTORS@ AND OVERLOAD RELAYS RATED NOT MORE THAN 2000 VOLTS AC OR 750 VOLTS DC@ PART 8: DISCONNECT DEVICES FOR USE IN INDUSTRIAL CONTROL EQUIPMENT (***ICS 2.8 was Incorporated into ICS 2***)
NEMA WC 53-1990 Standard Test Methods for Extruded Dielectric Power@ Control@ Instrumentation@ and Portable Cables for Test
NEMA ICS 2.3-1995 Instructions for the Handling@ Installation@ Operation@ and Maintenance of Motor Control Centers Rated Not More Than 600 Volts
NEMA ICS 15-1999 Instructions for the Handling@ Installation@ Operation and Maintenance of Electric Fire Pump Controllers Rated Not More Than 600V

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), How does the power supply control the voltage

ASHRAE QC-06-012-2006 Monitored Energy Performance of Electrochromic Windows Controlled for Daylight and Visual Comfort

RO-ASRO, How does the power supply control the voltage

STAS 11535/4-1983 Hydraulic (Lives MINIATURIZED SLIDING SPOOL VALVES, WITH ELECTRICAL CONTROL Basic dimensions
STAS 11232/7-1981 Stabilized power supplies, i.e. output= MEASUREMENT CAPACITANCE TO FRAME, COMMON .MODE CURRENT,BOUNDARY CONDITION, SOUND LEVEL AND CONTROL EFECTS Specifications

JP-JEM, How does the power supply control the voltage

JEM 1122-2011 Conductors for low-voltage circuits of switchgear and controlgear assemblies
JEM 1334-2008 Clearances and creepage distances for low-voltage switchgear and controlgear assemblies

AT-ON, How does the power supply control the voltage

OENORM EN 12098-3-2021 Energy performance of buildings - Controls for heating systems - Part 3: Control equipment for electrical heating systems - Modules M3-5,6,7,8

Insulated Cable Engineers Association （ICEA), How does the power supply control the voltage

ICEA T-26-465-1990 Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test [Use: NEMA WC 54, NEMA WC 54, NEMA WC 54, NEMA WC 54]
ICEA T-27-581-2000 Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test [Use: NEMA WC 53, NEMA WC 53, NEMA WC 53, NEMA WC 53]

VDI - Verein Deutscher Ingenieure, How does the power supply control the voltage

VDI/VDE 2180 Blatt 5-1969 Sicherung von Anlagen der Verfahrenstechnik; Hilfsenergieversorgung der Einrichtungen zum Messen@ Steuern und Regeln

European Telecommunications Standards Institute (ETSI), How does the power supply control the voltage

ETSI TS 183 018-2009 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Resource and Admission Control: H.248 Profile Version 3 for controlling Border Gateway Functions (BGF) in the Resource and Admission Control Subsystem (RACS
ETSI TS 183 018-2010 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Resource and Admission Control: H.248 Profile Version 3 for controlling Border Gateway Functions (BGF) in the Resource and Admission Control Subsystem (RACS
ETSI ES 202 336-2-2009 Environmental Engineering (EE); Monitoring and control interface for infrastructure equipment (Power, Cooling and environment systems used in telecommunication networks); Part 2: DC power system control and monitoring information model (V1.1.1)

GM North America, How does the power supply control the voltage

GM GM158M-1997 Vibration Control Material for Doubler Plate, Pre - Elpo Applications

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., How does the power supply control the voltage

ASHRAE 4208-1998 Impact of the Adoption of Efficient Electrical Products and Control Technologies on Office Building Energy Use

PL-PKN, How does the power supply control the voltage

PN E05110-05-1987 Switchgear and controlgear assemblies at the rated voltage 380 a.c. for the municipal buildings Distribution boards

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, How does the power supply control the voltage

GB/T 22720.1-2017 Rotating electrical machines—Qualification and quality control tests of partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters

ETSI - European Telecommunications Standards Institute, How does the power supply control the voltage

ES 283 018-2009 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Resource and Admission Control: H.248 Profile for controlling Border Gateway Functions (BGF) in the Resource and Admission Control Subsystem (RACS); Protoco
ES 283 018-2006 Telecommunications and Internet Converged Services and Protocols for Advanced Networking (TISPAN); Resource and Admission Control: H.248 Profile for controlling Border Gateway Functions (BGF) in the Resource and Admission Control Subsystem (RACS); Protoco
ES 283 018-2008 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Resource and Admission Control: H.248 Profile for controlling Border Gateway Functions (BGF) in the Resource and Admission Control Subsystem (RACS); Protoco
ES 283 018-2010 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Resource and Admission Control: H.248 Profile for controlling Border Gateway Functions (BGF) in the Resource and Admission Control Subsystem (RACS); Protoco
ES 283 018-2007 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Resource and Admission Control: H.248 Profile for controlling Border Gateway Functions (BGF) in the Resource and Admission Control Subsystem (RACS); Protoco

ES-AENOR, How does the power supply control the voltage

UNE 20-800 Pt.2-1986