ZH
RU
ES

Standard Deviation and Standard Uncertainty

Standard Deviation and Standard Uncertainty, Total:283 items.

In the international standard classification, Standard Deviation and Standard Uncertainty involves: Paints and varnishes, Occupational safety. Industrial hygiene, Raw materials for rubber and plastics, Quality, Rubber and plastics products, Metrology and measurement in general, Products of the textile industry, Rubber, Air quality, Particle size analysis. Sieving, Petroleum products in general, Protection against fire, Physics. Chemistry, Test conditions and procedures in general, Nuclear energy engineering, Water quality, Terminology (principles and coordination), Geology. Meteorology. Hydrology, Radiation measurements, Non-ferrous metals, Optics and optical measurements, Pipeline components and pipelines, Linear and angular measurements, Shafts and couplings, Construction materials, Products of non-ferrous metals, Vacuum technology, Gears, Electromagnetic compatibility (EMC), Graphic technology, Electricity. Magnetism. Electrical and magnetic measurements, Standardization. General rules, Applications of information technology, Wood-based panels, Components for aerospace construction, Elements of buildings, Environmental protection, Fasteners for aerospace construction, Powder metallurgy, Fuels, Machine tools, Construction industry, Earthworks. Excavations. Foundation construction. Underground works, Equipment for the chemical industry, Petroleum, petroleum products and natural gas handling equipment, Pesticides and other agrochemicals, Measurement of volume, mass, density, viscosity, Fluid storage devices, Burners. Boilers.

American Society for Testing and Materials (ASTM), Standard Deviation and Standard Uncertainty

ASTM D3134-97(2003) Standard Practice for Establishing Color and Gloss Tolerances
ASTM D3134-97 Standard Practice for Establishing Color and Gloss Tolerances
ASTM D3134-97(2008)e1 Standard Practice for Establishing Color and Gloss Tolerances
ASTM D3670-91(2001) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D3670-91(2022) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D3670-91(2014) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D3670-91(1996)e1 Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D3670-91(2007) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D4821-05 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-99 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-01a Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-15 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-16 Standard Guide for Carbon Black&x2014;Validation of Test Method Precision and Bias
ASTM D4821-06 Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
ASTM D4821-07 Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
ASTM D7729-12(2018)e1 Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software
ASTM D2906-97 Standard Practice for Statements on Precision and Bias for Textiles
ASTM D2906-97(2002) Standard Practice for Statements on Precision and Bias for Textiles
ASTM E2655-14 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
ASTM D3134-15 Standard Practice for Establishing Color and Gloss Tolerances
ASTM E1486-98(2004) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM E2578-07(2018) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E2578-07(2022) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM D4821-14 Standard Guide for Carbon Blackmdash;Validation of Test Method Precision and Bias
ASTM D6300-03 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-07 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-14ae1 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM E2536-21 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM D8293-19 Standard Guide for Evaluating and Expressing the Uncertainty of Radiochemical Measurements
ASTM D8293-22 Standard Guide for Evaluating and Expressing the Uncertainty of Radiochemical Measurements
ASTM E177-13 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E2536-14 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM E2536-15 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM E2536-15a Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM E2536-06 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM D3134-15(2019) Standard Practice for Establishing Color and Gloss Tolerances
ASTM C1215-92(1997) Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM C1215-18 Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM E2655-14(2020) Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
ASTM D4821-04 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-01 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-03 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-03a Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-19 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-20 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-07e1 Standard Guide for Carbon BlackValidation of Test Method Precision and Bias
ASTM D2777-03 Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water
ASTM G213-17(2023) Standard Guide for Evaluating Uncertainty in Calibration and Field Measurements of Broadband Irradiance with Pyranometers and Pyrheliometers
ASTM E2536-09 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM D7440-23 Standard Practice for Characterizing Uncertainty in Air Quality Measurements
ASTM D2777-06 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D2777-08e1 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM E177-90a(1996) Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-04 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-06 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-04e1 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-19 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-20 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM ISO/ASTM51707-15 Standard Guide for Estimation of Measurement Uncertainty in Dosimetry for Radiation Processing
ASTM B598-98(2004) Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
ASTM B598-98 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
ASTM E2867-14(2019) Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
ASTM D7729-12 Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software
ASTM D7366-08(2019) Standard Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods
ASTM C670-03 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM C670-10 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM D2777-21 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM C670-13 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM E177-10 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM G213-17 Standard Guide for Evaluating Uncertainty in Calibration and Field Measurements of Broadband Irradiance with Pyranometers and Pyrheliometers
ASTM D2777-13 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM E799-92(1998) Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis
ASTM B754-22 Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
ASTM D2777-12 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM E2867-13 Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
ASTM D7366-08(2013) Standard Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods
ASTM D7366-08 Standard Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods
ASTM E2867-14(2023) Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
ASTM D2244-02 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-02e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-05 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D6300-19 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-13a Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-19a Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM C1851-18 Standard Practice for Determining the Extent of Cracking in a Sealant using the Difference between the Compressive and Tensile Modulus
ASTM D6300-13 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-14 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-17 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-17a Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D8215-20 Standard Practice for Statistical Modeling of Uncertainty in Assessment of In-place Coal Resources
ASTM D8215-19 Standard Practice for Statistical Modeling of Uncertainty in Assessment of In-place Coal Resources
ASTM D8215-18 Standard Practice for Statistical Modeling of Uncertainty in Assessment of In-place Coal Resources
ASTM D8215-19a Standard Practice for Statistical Modeling of Uncertainty in Assessment of In-place Coal Resources
ASTM C670-15 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM D4483-99 Standard Practice for Determining Precision for Test Method Standards in the Rubber and Carbon Black Industries
ASTM E2655-08 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
ASTM E2867-14 Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
ASTM D7250/D7250M-20 Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness
ASTM C670-96 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM D6300-06 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-04 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-23 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D4483-05a(2011) Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM E2554-18 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
ASTM E2554-18e1 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
ASTM D6300-20a Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D6300-21 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D6300-20 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D6300-20b Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM F733-90(2003) Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
ASTM F733-90(1997)e1 Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
ASTM F733-09 Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
ASTM D3180-89(1997) Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
ASTM E1486-98(2010) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM E1486-14 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM E2554-13 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
ASTM D6250-98 Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions
ASTM D6250-98(2003) Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions
ASTM D6250-98(2009) Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions
ASTM E1486-98 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM B930-03 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2008) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2012) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM F3110-14(2018) Standard Practice for Proper Use of Mechanical Trenchless Point Repair Sleeve with Locking Gear Mechanism for Pipes of Varying Inner Diameter and Offset Joints
ASTM E1486-14(2022) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM E1486M-14(2022) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric)
ASTM E1486M-98(2010) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]
ASTM E1486M-14 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria 40;Metric41;
ASTM D3180-12 Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
ASTM E1486M-98 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]
ASTM E1486M-98(2004) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]
ASTM D1729-22 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM E1369-11 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
ASTM D5731-16 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
ASTM D5605-94(2016) Standard Practice for Styrene-Butadiene Rubber (SBR)—Establishing Raw Mooney Viscosity Target Values
ASTM D4671-05(2010)e1 Standard Test Method for Polyurethane Raw Materials Determination of Unsaturation of Polyols
ASTM D4671-16 Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of Polyols
ASTM E727/E727M-08(2013)e1 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM E727-91(1998) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM E727-02 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM E727/E727M-08(2020) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM C1472-16(2022) Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
ASTM C1472-10 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
ASTM D445-14 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids 40;and Calculation of Dynamic Viscosity41;
ASTM D445-14e1 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids 40;and Calculation of Dynamic Viscosity41;
ASTM D445-14e2 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids &40;and Calculation of Dynamic Viscosity&41;
ASTM D445-17 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D6300-99 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-02 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-08 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-15 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-14a Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-16 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-16a Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants

AGMA - American Gear Manufacturers Association, Standard Deviation and Standard Uncertainty

ISO 1328-2:1999 Cylindrical Gears - ISO System of Accuracy - Part 2: Definitions and Allowable Values of Deviations Relevant to Radial Composite Deviations and Runout Information

Japanese Industrial Standards Committee (JISC), Standard Deviation and Standard Uncertainty

JIS Z 9042:1962 Significance test of difference between the population mean and the standard (standard deviation known, one-sided)
JIS Z 9043:1962 Significance test of difference between the population mean and the standard (standard deviation known, two-sided)
JIS Z 9044:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, one-sided)
JIS Z 9045:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, two-sided)
JIS Z 8402-5:2002 Accuracy (trueness and precision) of measurement methods and results -- Part 5: Alternative methods for the determination of the precision of a standard measurement method
JIS B 9624:2007 Graphic technology and photography -- Certified reference materials for reflection and transmission metrology -- Documentation and procedures for use, including determination of combined standard uncertainty

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Standard Deviation and Standard Uncertainty

GB/T 17531-1998 Rubber and rubber products--Determination of accuracy and bias of chemical test methods
GB/T 24635.3-2009 Geometrical Product Specification(GPS)-Coordinate measuring machines(CMM):Technique for determining the uncertainty of measurement-Part 3: Use of calibrated workpieces or standards
GB/Z 6113.401-2007 Specification for radio disturbance and immunity measuring apparatus and methods.Part 4-1:Uncertainties,statistics and limit modelling.Uncertainties in standardized EMC tests
GB/Z 6113.401-2018 Specification for radio disturbance and immunity measuring apparatus and methods.Part 4-1:Uncertainties,statistics and limit modelling.Uncertainties in standardized EMC tests

American Gear Manufacturers Association, Standard Deviation and Standard Uncertainty

AGMA 99FTM3-1999 Measurement Uncertainty for Pitch and Runout Artifacts

National Metrological Technical Specifications of the People's Republic of China, Standard Deviation and Standard Uncertainty

JJF(铁道) 602-2004 Uncertainty in Measurement for Special Measuring Standards of Railway

American National Standards Institute （ANSI), Standard Deviation and Standard Uncertainty

ANSI/NCSL Z540.2-1997 American National Standard for Expressing Uncertainty - U.S. Guide to the Expression of Uncertainty in Measurement
ANSI/ASTM D4968:2000 Guide to Using the Flow Chart for Annual Review of Standards Including the Model Precision and Bias Statement for Plastics (08.03)
ANSI/IEEE C63.23:2012 Standard Guide for Electromagnetic Compatibility - Computations and Treatment of Measurement Uncertainty
ANSI/ASTM D6300 REV B:2020 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ANSI/ASTM D6300:2021 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants

International Organization for Standardization (ISO), Standard Deviation and Standard Uncertainty

ISO/TR 9474:1993 Rubber and rubber products; determination of accuracy and bias of chemical test methods
ISO/AWI 5725-5 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
ISO/CD 5725-5:2023 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
ISO 9272:1986 Rubber and rubber products; Determination of precision for test method standards
ISO/TR 9272:1986 Rubber and rubber products; Determination of precision for test method standards
ISO/TR 9272:2005 Rubber and rubber products - Determination of precision for test method standards
ISO 5725-5:1998/cor 1:2005 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method; Technical Corrigendum 1
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO/TS 15530-3:2004 Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards

Association of German Mechanical Engineers, Standard Deviation and Standard Uncertainty

VDI 2449 Blatt 3-2001 Measurement methods test criteria - General method for the determination of the uncertainty of calibratable measurement methods
VDI/VDE 2629 Blatt 2-2012 Accuracy of contour-measuring systems - Characteristics and their checking - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces

Standard Association of Australia （SAA）, Standard Deviation and Standard Uncertainty

AS/NZS CISPR 16.4.1:2012
RUL PE.9-2002 Rulings to pressure equipment Standards - Ruling 9: Design of pressure equipment using steel having bilateral thickness tolerances (Ruling to AS 1210 and AS 1548)

Group Standards of the People's Republic of China, Standard Deviation and Standard Uncertainty

T/SMA 0007-2020 Evaluation Method of Measurement Uncertainty of Variable Head Water Flow Standard Device

British Standards Institution (BSI), Standard Deviation and Standard Uncertainty

BS ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method
BS ISO 5725-2:2019 Accuracy (trueness and precision) of measurement methods and results - Basic method for the determination of repeatability and reproducibility of a standard measurement method
PD CISPR/TR 16-4-1:2009 Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modelling. Uncertainties in standardized EMC tests
BS ISO 5725-4:1995 Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method
BS 3730-2:1982 Assessment of departures from roundness - Specification for characteristics of stylus instruments for measuring variations in radius (including guidance on use and calibration)
BS ISO 15790:2005 Graphic technology and photography - Certified reference materials for reflection and transmission metrology - Documentation and procedures for use, including determination of combined standard uncertainty
BS ISO 5725-5:1998 Accuracy (trueness and precision) of measurement methods and results - Alternative methods for the determination of the precision of a standard measurement method
BS ISO 15790:2004 Graphic technology and photography. Certified reference materials for reflection and transmission metrology. Documentation and procedures for use, including determination of combined standard uncertainty
BS ISO 3686-1:2000 Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle - Testing of the accuracy - Single column type machines
BS EN ISO 15530-3:2011 Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement. Use of calibrated workpieces or measurement standards

KR-KS, Standard Deviation and Standard Uncertainty

KS A ISO 5725-4-2021 Accuracy(trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
KS Q ISO 39511-2020 Sequential sampling plans for inspection by variables for percent nonconforming(known standard deviation)
KS Q ISO 8423-2015 Sequential sampling plans for inspection by variables for percent nonconforming(known standard deviation)
KS B ISO 15530-3-2020 Geometrical product specifications(GPS) — Coordinate measuring machines(CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards

Korean Agency for Technology and Standards (KATS), Standard Deviation and Standard Uncertainty

KS A ISO 5725-4:2021 Accuracy(trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
KS Q ISO 39511:2020 Sequential sampling plans for inspection by variables for percent nonconforming(known standard deviation)
KS C CISPR TR 16-4-1-2012(2017) Specification for radio disturbance and immunity measuring apparatus and methods－Part 4-1：Uncertainties, statistics and limit modelling－Uncertainties in standardized EMC tests
KS B ISO 15530-3:2020 Geometrical product specifications(GPS) — Coordinate measuring machines(CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards
KS C CISPR TR 16-4-1-2012 Specification for radio disturbance and immunity measuring apparatus and methods－Part 4-1：Uncertainties, statistics and limit modelling－Uncertainties in standardized EMC tests
KS X ISO 15790-2005(2020) Graphic technology and photography－Certified reference materials for reflection and transmission metrology－Documentation and procedures for use, including determination of combined standard uncertaint
KS C CISPR TR 16-4-1-2012(2022) Specification for radio disturbance and immunity measuring apparatus and methods－Part 4-1：Uncertainties, statistics and limit modelling－Uncertainties in standardized EMC tests
KS A ISO 5725-4-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 4：Basic methods for the determination of the trueness of a standard measurement method
KS A ISO 5725-5-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 5：Alternative methods for the determination of the precision of a standard measurement method
KS A ISO 5725-4:2012 Accuracy(trueness and precision) of measurement methods and results-Part 4:Basic methods for the determination of the trueness of a standard measurement method
KS A ISO 5725-2-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 2：Basic method for the determination of repeatability and reproducibility of a standard measurement method

RU-GOST R, Standard Deviation and Standard Uncertainty

GOST R 8.913-2016 State system for ensuring the uniformity of measurements. Satellite laser ranging systems. Accuracy and measurement uncertainty. Standardized metrological characteristics
GOST R ISO 5725-4-2002 Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method
GOST R 1.10-2004 Standardization in the Russian Federation. Rules for standardization and recommendations for standardization. Order of elaboration, confirmation, amendment, revision and abrogation
GOST R 1.10-1995 State system for standardization of Russian Federation. Procedure for working out, acceptance, registration of rules and recommendations on standardization, metrology, sertification, accreditation, catalogization and information about them
GOST R ISO 5725-2-2002 Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method
GOST R ISO 5725-5-2002 Accuracy (trueness and precision) of measurement methods and results. Part 5. Alternative methods for the determination of the precision of a standard measurement method
GOST R 52857.11-2007 Vessels and apparatus. Norms and methods of strength calculation. Method of strength calculation of shells and heads according to weld misalignment, angular misalignment and shell nonroundness
GOST 8.648-2015 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the parameters of deviations of form and position of rotation

Association Francaise de Normalisation, Standard Deviation and Standard Uncertainty

NF ISO 5725-4:2020 Exactitude (justesse et fidélité) des résultats et méthodes de mesure - Partie 4 : méthodes de base pour la détermination de la justesse d'une méthode de mesure normalisée
NF X06-041-4*NF ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Part 4 : basic methods for the determination of the trueness of a standard measurement method
NF E23-007-2:1997 Cylindrical gears. ISO system of accuracy. Part 2 : definitions and allowable values of deviations relevant to radial composite deviations and runout information.
NF EN ISO 15530-3:2011 Spécification géométrique des produits (GPS) - Machines à mesurer tridimensionnelles (MMT) : Technique pour la détermination de l'incertitude de mesure - Partie 3 : utilisation de pièces étalonnées ou d'étalons de mesure
NF T20-082:1976 Produits chimiques à usage industriel - Échantillonnage en vue de la détermination d'un titre moyen dans le cas ou l'écart-type de la dispersion de la grandeur mesurée est inconnu.
NF E11-160-3*NF EN ISO 15530-3:2011 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): technique for determining the uncertainty of measurement - Part 3 : use of calibrated workpieces or measurement standards
NF X06-041-2*NF ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2 : basic method for the determination of repeatability and reproducibility of a standard measurement method
NF ISO 5725-2:2020 Exactitude (justesse et fidélité) des résultats et méthodes de mesure - Partie 2 : méthode de base pour la détermination de la répétabilité et de la reproductibilité d'une méthode de mesure normalisée
NF E23-007-1:1995 Cylindrical gears. ISO system of accuracy. Part 1 : definitions and allowable values of deviations relevant to corresponding flanks of gear teeth.
NF L24-138*NF EN 3543:1997 Aerospace series. Screws, 100 degrees countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification : 1100 MPa (at ambient temperature) / 425 degrees Celsius
FD X07-021:1999 Fundamental standards - Metrology and application of the statistics - Help to the process for the estimation and the use of the measurement and test results uncertainty

German Institute for Standardization, Standard Deviation and Standard Uncertainty

DIN EN ISO 1127:1997 Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992); German version EN ISO 1127:1996
DIN ISO 5725-5:2002-11 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998)
DIN EN ISO 15530-3:2018-09 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011); German version EN 15530-3:2011
DIN EN ISO 15530-3:2018 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
DIN ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:2019); Text in German and English
DIN ISO 5725-5 Berichtigung 1:2006 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998), Corrigenda to DIN ISO 5725-5:2002-11 (ISO 5725-5:1998/Cor. 1:2005
DIN ISO/TS 15530-3:2008 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards (ISO/TS 15530-3:2004); German version CEN ISO/TS 15530-3:2007

API - American Petroleum Institute, Standard Deviation and Standard Uncertainty

API MPMS 13.3-2016 Manual of Petroleum Measurement Standards Chapter 13.3 Measurement Uncertainty (FIRST EDITION)
API MPMS 13.3-2017 Manual of Petroleum Measurement Standards Chapter 13.3 Measurement Uncertainty (SECOND EDITION)

ZA-SANS, Standard Deviation and Standard Uncertainty

SANS 286-2:1988 ISO system of limits and fits Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
SANS 216-4-1:2009 Specification for radio disturbance and immunity measuring apparatus and methods Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests

未注明发布机构, Standard Deviation and Standard Uncertainty

JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles

North Atlantic Treaty Organization Standards Agency, Standard Deviation and Standard Uncertainty

STANAG 3583-1993 STANDARDS OF ACCURACY FOR DIFFERENTIAL PRESSURE GAUGES FOR AVIATION FUEL FILTERS AND FILTER SEPARATOR VESSELS

Danish Standards Foundation, Standard Deviation and Standard Uncertainty

DS/ISO 5725-5/Corr. 1:2005 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
DS/ISO 5725-5:2000 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
DS/EN ISO 15530-3:2012 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards
DS/ISO 5725-2/Corr.1:2002 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

IT-UNI, Standard Deviation and Standard Uncertainty

UNI ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
UNI 5784-1973
UNI ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Standard Deviation and Standard Uncertainty

GB/T 34876-2017 Vacuum technology—Vacuum gauges—Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge

VN-TCVN, Standard Deviation and Standard Uncertainty

TCVN 6910-4-2001 Accuracy (trueness and precision) of measurement methods and results.Part 4: Basic methods for the determination of the trueness of a standard measurement method
TCVN 6910-5-2002 Accuracy (trueness and precision) of measurement methods and results.Part 5: Alternative methods for the determination of the precision of a standard measurement method

CN-STDBOOK, Standard Deviation and Standard Uncertainty

图书 3-9720 Evaluation and Expression of Measurement Uncertainty Compilation of National Metrology Technical Specifications and Standards (Second Edition)

International Electrotechnical Commission (IEC), Standard Deviation and Standard Uncertainty

CISPR 16-4-1/TR-2005 Specification for radio disturbance and immunity measuring apparatus and methods--Part4-1:Uncertainties,statistics and limit modelling -Uncertainties in standardized EMC tests
CISPR 16-4-1-2003 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1:Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests
CISPR TR 16-4-1:2009 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests
CISPR TR 16-4-1-2009 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests
CISPR/TR 16-4-1-2009 Specification for radio disturbance and immunity measuring apparatus and methods – Part 4-1: Uncertainties, statistics and limit modelling – Uncertainties in standardized EMC tests

Institute of Electrical and Electronics Engineers (IEEE), Standard Deviation and Standard Uncertainty

IEEE/ANSI C63.23-2012 American National Standard Guide for Electromagnetic Compatibility¿¿¿Computations and Treatment of Measurement Uncertainty
ANSI C63.23-2012 American National Standard Guide for Electromagnetic Compatibility—Computations and Treatment of Measurement Uncertainty
IEEE Std C63.23-2012 American National Standard Guide for Electromagnetic Compatibility - Computations and Treatment of Measurement Uncertainty

CU-NC, Standard Deviation and Standard Uncertainty

NC 00-37-1987 National System for Standardiza- tion, Metrology and Quality Control. Guide for the Elabora- tion of Precisión Measurement Standards

American Society of Mechanical Engineers (ASME), Standard Deviation and Standard Uncertainty

ASME B89.7.1 TECH RPT-2016 Guidelines for Addressing Measurement Uncertainty in the Development and Application of ASME B89 Standards
ASME B89.7.1-2016 Guidelines for Addressing Measurement Uncertainty in the Development and Application of ASME B89 Standards

NATO - North Atlantic Treaty Organization, Standard Deviation and Standard Uncertainty

STANAG 3583-1974 Standards of Accuracy for Differential Pressure Gauges for Aviation Fuel Filters and Filter Separators (ED 2 AMD 3; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Ph
STANAG 3583-2001 Standards of Accuracy for Differential Pressure Gauges for Aviation Fuel Filters and Filter Separator Vessels (ED 3; Amendment 5: 07/10/2001; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website:

Lithuanian Standards Office , Standard Deviation and Standard Uncertainty

LST EN ISO 15530-3:2012 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
LST ISO 5725-2+AC1:2006 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (identical ISO 5725-2:1994 including technical corrigendum ISO 5725:1994/

AENOR, Standard Deviation and Standard Uncertainty

UNE 82009-5:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD.
UNE 82009-4:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 4: BASIC METHODS FOR THE DETERMINATION OF THE TRUENESS OF A STANDARD MEASUREMENT METHOD.
UNE 82009-2:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 2: BASIC METHOD FOR THE DETERMINATION OF REPEATABILITY AND REPRODUCIBILITY OF A STANDARD MEASUREMENT METHOD.

IEC - International Electrotechnical Commission, Standard Deviation and Standard Uncertainty

CISPR/TR 16-4-1 AMD 2-2007 Specification for radio disturbance and immunity measuring apparatus and methods – Part 4-1: Uncertainties@ statistics and limit modelling – Uncertainties in standardized EMC tests (Edition 1.1)
CISPR/TR 16-4-1-2005 Specification for radio disturbance and immunity measuring apparatus and methods – Part 4-1: Uncertainties@ statistics and limit modelling – Uncertainties in standardized EMC tests (Edition 1.1; Consolidated Reprint)
PAS 62204-2000 Standard Method for Measuring and Using the Temperature Coefficient of Resistance to Determine the Temperature of a Metallization Line (Edition 1.0)

European Committee for Standardization (CEN), Standard Deviation and Standard Uncertainty

CEN ISO/TS 15530-3:2007 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards
EN ISO 15530-3:2011 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)

CZ-CSN, Standard Deviation and Standard Uncertainty

CSN 01 3135 Za-1987

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Standard Deviation and Standard Uncertainty

IEEE C63.23-2012 American National Standard Guide for Electromagnetic Compatibility-Computations and Treatment of Measurement Uncertainty (Includes Access to Additional Content)

GOSTR, Standard Deviation and Standard Uncertainty

GOST R 8.980-2019 State system for ensuring the uniformity of measurements. Standard reference data. The critical temperatures and critical pressures of thermo unstable substances
GOST ISO 1328-1-2017 Cylindrical gears. ISO system. Flank tolerance classification. Part 1. Definitions and allowable values of deviations relevant to flanks of gear teeth

AASHTO - American Association of State Highway and Transportation Officials, Standard Deviation and Standard Uncertainty

T 272-2018 Standard Method of Test for One-Point Method for Determining Maximum Dry Density and Optimum Moisture
T 272-2016 Standard Method of Test for One-Point Method for Determining Maximum Dry Density and Optimum Moisture