ZH
RU
ES
Microhardness and Vickers Hardness
Microhardness and Vickers Hardness, Total:350 items.
In the international standard classification, Microhardness and Vickers Hardness involves: Surface treatment and coating, Jewellery, Shafts and couplings, Testing of metals, Metalliferous minerals, Welding, brazing and soldering, Powder metallurgy, Mechanical testing, Paints and varnishes, Protection against fire, Plastics, Rubber, Coals, Non-ferrous metals, Environmental testing, Reinforced plastics, Ceramics, Glass, Construction materials, Shipbuilding and marine structures in general, Heat treatment.
Korean Agency for Technology and Standards (KATS), Microhardness and Vickers Hardness
- KS B 5538-1993 Micro hardness testing machines for vickers and knoop hardness
- KS D 8515-2009 Metallic and related coatings－Vickers and Knoop microhardness tests
- KS D 8515-2009(2020) Metallic and related coatings－Vickers and knoop microhardness tests
- KS B 5538-1993(2003) MICRO HARDNESS TESTING MACHINES FOR VICKERS AND KNOOP HARDNESS
- KS B ISO 14271:2019 Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
- KS D ISO 3878:2001 Hardmetals-Vickers hardness test
- KS D ISO 3878-2001(2011) Hardmetals-Vickers hardness test
- KS B ISO 14271:2004 Vickers hardness testing of resistance spot, projection and seam welds(low load and microhardness)
- KS B 5525-2002 Vickers hardness testing machines(Verification of testing mechine)
- KS B 5539-1995 Standardized block of Vickers hardness
- KS B 5525-1985 Vickers hardness testing machines(Verification of testing mechine)
- KS M ISO 6441-1:2005 Paints and varnishes－Determination of micro－indentation hardness－Part 1：Knoop hardness by measurement of indentation length
- KS M ISO 6441-1:2002 Paints and varnishes－Determination of micro－indentation hardness－Part 1：Knoop hardness by measurement of indentation length
- KS B 5539-2002 Metallic materials－Vickers hardness test－Part 3：Calibration of reference blocks
- KS M ISO 6441-2:2002 Paints and varnishes－Determination of micro－indentation hardness－Part 2：Knoop hardness by measurement of indentation depth under load
- KS M ISO 6441-2:2005 Paints and varnishes－Determination of micro－indentation hardness－Part 2：Knoop hardness by measurement of indentation depth under load
- KS M ISO 868:2011 Plastics and ebonite-Determination of indentation hardness by means of a durometer(Shore hardness)
- KS M ISO 868-2016(2021) Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
- KS M ISO 868:2016 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
- KS D ISO 4498:2010 Sintered metal materials, excluding hardmetals-Determination of apparent hardness and microhardness
- KS B 0800-2001 Test methods for Vickers hardness at elevated temperatures
- KS M ISO 21509-2014(2019) Plastics and ebonite — Verification of Shore durometers
- KS B 0800-1995 Test methods for Vickers hardness at elevated temperatures
- KS B 0800-2001(2021) Test methods for Vickers hardness at elevated temperatures
- KS B 5525-2002(2017) Vickers hardness testing machines(Verification of testing mechine)
- KS B 0811-2003 Metallic materials－Vickers hardness test－Part 1：Test method
- KS B 5525-2002(2022) Vickers hardness testing machines(Verification of testing mechine)
- KS B 0800-2001(2016) Test methods for Vickers hardness at elevated temperatures
- KS B 0811-1983 Metallic materials－Vickers hardness test－Part 1：Test method
- KS M ISO 21509:2014 Plastics and ebonite — Verification of Shore durometers
- KS B 0806-1994 Method of rockwell and rockwell superficial hardness test
- KS B ISO 22826-2016(2021) Destructive tests on welds in metallic materials－Hardness testing of narrow joints welded by laser and electron beam(Vickers and Knoop hardness tests)
SE-SIS, Microhardness and Vickers Hardness
International Organization for Standardization (ISO), Microhardness and Vickers Hardness
- ISO 4516:1980 Metallic and related coatings; Vickers and Knoop microhardness tests
- ISO 4516:2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests
- ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
- ISO 14271:2017 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
- ISO 14271:2000 Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness)
- ISO 3878:1976 Title missing - Legacy paper document
- ISO 3878:1983 Hardmetals; Vickers hardness test
- ISO 6507-1:1982 Metallic materials; Hardness test; Vickers test; Part 1 : HV 5 to HV 100
- ISO 6441-1:1999 Paints and varnishes - Determination of micro-indentation hardness - Part 1: Knoop hardness by measurement of indentation length
- ISO 14271:2011/Cor 1:2012 Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds — Technical Corrigendum 1
- ISO 6507-2:1983 Metallic materials; Hardness test; Vickers test; Part 2 : HV 0,2 to less than HV 5
- ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
- ISO 4498:2005 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
- ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
- ISO 868:1985 Plastics and ebonite; Determination of indentation hardness by means of a durometer (Shore hardness)
- ISO/R 146:1968 Verification of Vickers hardness testing machines
- ISO 6507-4:2005 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values
- ISO 6507-4:2018 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values
- ISO 6441-2:1999 Paints and varnishes - Determination of micro-indentation hardness - Part 2: Knoop hardness by measurement of indentation depth under load
- ISO/R 409:1964 Tables of Vickers hardness values (HV) for metallic materials
- ISO/R 81:1967 Vickers hardness test for steel (Load 5 to 100 kgf)
- ISO 21509:2006 Plastics and ebonite - Verification of Shore durometers
- ISO 6769:2022 Vitreous and porcelain enamels — Determination of surface scratch hardness according to the Mohs scale
- ISO 409-1:1982 Metallic materials; Hardness test; Tables of Vickers hardness values for use in tests made on flat surfaces; Part 1 : HV 5 to HV 100
- ISO/R 640:1967 Calibration of standardized blocks to be used for Vickers hardness testing machines
Danish Standards Foundation, Microhardness and Vickers Hardness
- DS/ISO 4516:1983 Metallic and related coatings. Vickers and Knoop microhardness tests
- DS/EN ISO 4516:2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests
- DS/EN ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
- DS/EN ISO 14271/AC:2012 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
- DS/EN 23878:1994 Hardmetals. Vickers hardness test
- DS/ISO 3878:1994 Hardmetals - Vickers hardness test
- DS/EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
- DS/EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
- DS/EN ISO 6507-4:2006 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values
Group Standards of the People's Republic of China, Microhardness and Vickers Hardness
- T/SZS 4018-2020 Hardness test method of precious metal jewelry Vickers hardness test method
- T/CSTM 00650-2021 Metallic materials—High temperature Vickers hardness test method
Association Francaise de Normalisation, Microhardness and Vickers Hardness
- NF A91-118*NF EN ISO 4516:2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests.
- NF A91-118:1981 Metallic coatings. Vickers and Knoop microhardness tests.
- NF A89-568:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds.
- NF A89-568*NF EN ISO 14271:2017 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
- NF EN ISO 4516:2002 Revêtements métalliques et autres revêtements inorganiques - Essais de microdureté Vickers et Knoop
- NF EN ISO 14271:2017 Soudage par résistance - Essais de dureté Vickers (force réduite et microdureté) sur soudures par résistance par points, par bossages et à la molette
- NF A95-422:1993 Hardmetals. Vickers hardness test.
- NF A95-329:1986 Powder metallurgy. Sintered metal materials excluding hardmetals. Measurement of Vickers microhardness.
- NF EN ISO 4498:2010 Matériaux métalliques frittés, à l'exclusion des métaux-durs - Détermination de la dureté apparente et de la microdureté
- NF EN ISO 868:2003 Plastiques et ébonite - Détermination de la dureté par pénétration au moyen d'un duromètre (dureté Shore)
- NF A03-154-4:2006 Metallic materials - Vickers hardness test - Part 4 : tables of hardness values.
- NF A03-154-4*NF EN ISO 6507-4:2018 Metallic materials - Vickers hardness test - Part 4 : tables of hardness values
- NF A95-321:2008 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness.
- NF A95-321*NF EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
- NF EN 843-4:2005 Céramiques techniques avancées - Propriétés mécaniques des céramiques monolithiques à température ambiante - Partie 4 : essais de dureté Vickers, Knoop et Rockwell superficiel
- NF T57-106*NF EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
- NF EN ISO 22826:2021 Essais destructifs des soudures sur matériaux métalliques - Essais de dureté sur joints étroits soudés par faisceau d'électrons et faisceau laser (Essais de dureté Vickers et Knoop)
- NF T51-123*NF EN ISO 21509:2015 Plastics and ebonite - Verification of Shore durometers
- NF EN ISO 4507:2007 Matériaux ferreux frittés, cémentés ou carbonitrurés - Détermination et vérification de la profondeur de cémentation par mesurage de la microdureté
- NF B10-507:1973 Quarry products. Limestones. Measurement of Vickers hardness.
British Standards Institution (BSI), Microhardness and Vickers Hardness
- BS EN ISO 4516:2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests
- BS EN ISO 14271:2017 Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
- BS EN 23878:1993 Hardmetals. Vickers hardness test
- BS ISO 22394:2010 Hardmetals - Knoop hardness test
- BS EN ISO 6507-4:2006 Metallic materials - Vickers hardness test - Tables of hardness values
- BS EN ISO 14271:2011 Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
- BS EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
- BS EN ISO 6507-4:2018 Tracked Changes. Metallic materials. Vickers hardness test. Tables of hardness values
- BS EN ISO 4498:2007 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
- BS EN ISO 22826:2021 Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
- BS EN 59:2016 Glass reinforced plastics. Determination of indentation hardness by means of a Barcol hardness tester
- BS EN ISO 21509:2015 Plastics and ebonite. Verification of Shore durometers
- BS EN ISO 6506-2:1999 Metallic materials - Brinell hardness test - Verification and calibration of Brinell hardness testing machines
- BS ISO 21509:2006 Plastics and ebonite - Verification of Shore durometers
- BS EN ISO 9015-2:2011 Destructive tests on welds in metallic materials. Hardness testing. Microhardness testing of welded joints
Professional Standard - Agriculture, Microhardness and Vickers Hardness
National Metrological Verification Regulations of the People's Republic of China, Microhardness and Vickers Hardness
- JJG 335-1991 Verification Regulation of Standard Vickers Microhardness Test Block
- JJG 260-1991 Verification Regulation of Microhardometer
- JJG 148-1991 Verification Regulation of Standard Vickers Hardness Test Block
- JJG 151-1991 Verification Regulation of Metal Vickers Hardness Tester
- JJG 148-2006 Verification Regulation of Vickers Hardness Reference Blocks
- JJG 151-2006 Verification Regulation of Metallic Vickers Hardness Testers
- JJG 2025-1989 Verification Scheme of Measuring Instruments for Microhardness
- JJG 2026-1989 Verification Scheme of Measuring Instruments for Vickers Hardness
Taiwan Provincial Standard of the People's Republic of China, Microhardness and Vickers Hardness
- CNS 7094-1983 Method of Micro - Hardness Test for Vickers and Knoop Hardness
- CNS 8762-1982 Micro Hardness Testing Machines for Vickers and Knoop Hardness
- CNS 8763-1983 Method of Test for Micro Hardness Testing Machines for Vickers and Knoop Hardness
- CNS 2115-1983 Method of Vickers Hardness Test
- CNS 9209-1982 Vickers Hardness Testing Machines
- CNS 9210-1982 Method of Test for Vickers Hardness Testing Machines
- CNS 13983-1997 Method of test for Vickers hardness of fine ceramics
- CNS 14317-1999 Method of test for vickers hardness of fine ceramics at elevated temperatures
European Committee for Standardization (CEN), Microhardness and Vickers Hardness
- EN ISO 4516:2002 Metallic and Other Inorganic Coatings - Vickers and Knoop Microhardness Tests ISO 4516:2002
- EN ISO 14271:2017 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot@ projection@ and seam welds
- EN ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (Incorporating corrigendum April 2012)
- EN 23878:1993 Hardmetals; Vickers hardness test (ISO 3878:1983)
- EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010)
- EN ISO 868:1997 Plastics and Ebonite - Determination of Indentation Hardness by Means of a Durometer (Shore Hardness) ISO 868: 1985
- EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
- EN 59:1977 Glass Reinforced Plastics: Measurement of Hardness by Means of a Barcol Impressor
- EN ISO 4498:2007 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness [Superseded: CEN EN 24498-1]
- EN ISO 6769:2022 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022)
- EN ISO 21509:2015 Plastics and ebonite - Verification of Shore durometers
American Society for Testing and Materials (ASTM), Microhardness and Vickers Hardness
- ASTM E140-12be1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
- ASTM E140-07 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
- ASTM E140-97e2 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
- ASTM E140-12B(2019)e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
- ASTM E140-12b Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
- ASTM E140-05 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
- ASTM E140-05e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
- ASTM E140-97e3 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
- ASTM E140-02e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
- ASTM E140-02 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
- ASTM E384-11e1 Standard Test Method for Knoop and Vickers Hardness of Materials
- ASTM E92-17 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
- ASTM E92-16 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
- ASTM E92-23 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
- ASTM B647-84(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
- ASTM E384-11 Standard Test Method for Knoop and Vickers Hardness of Materials
- ASTM B647-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
- ASTM E110-14(2023) Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
- ASTM E384-05a Standard Test Method for Microindentation Hardness of Materials
- ASTM E384-99e1 Standard Test Method for Microindentation Hardness of Materials
- ASTM E384-16 Standard Test Method for Microindentation Hardness of Materials
- ASTM E384-08ae1 Standard Test Method for Microindentation Hardness of Materials
- ASTM E384-09 Standard Test Method for Microindentation Hardness of Materials
- ASTM E384-10 Standard Test Method for Microindentation Hardness of Materials
- ASTM E384-10e1 Standard Test Method for Knoop and Vickers Hardness of Materials
- ASTM E18-00 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
- ASTM E18-03e1 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
- ASTM E18-03 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
- ASTM E18-02 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
- ASTM E18-05e1 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
- ASTM E18-05 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
- ASTM E18-20 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
- ASTM E92-82(2003)e2 Standard Test Method for Vickers Hardness of Metallic Materials
- ASTM B578-87(1999) Standard Test Method for Microhardness of Electroplated Coatings
- ASTM B578-87(2004) Standard Test Method for Microhardness of Electroplated Coatings
- ASTM B578-87(2009) Standard Test Method for Microhardness of Electroplated Coatings
- ASTM B578-87(2015) Standard Test Method for Microhardness of Electroplated Coatings
- ASTM E384-06 Standard Test Method for Microindentation Hardness of Materials
- ASTM E384-22 Standard Test Method for Microindentation Hardness of Materials
- ASTM E384-17 Standard Test Method for Microindentation Hardness of Materials
- ASTM E92-82(1997)e3 Standard Test Method for Vickers Hardness of Metallic Materials
- ASTM E92-82(2003) Standard Test Method for Vickers Hardness of Metallic Materials
Indonesia Standards, Microhardness and Vickers Hardness
- SNI 13-4709-1998 Hardness testing of ore minerals by micro Vickers methods
- SNI 05-0719-1989 Micro Vickers hardness test method load from 0,0098 t0 49 N
- SNI 07-4906-1998 Vickers hardness values for use in tests made on flat surfaces of metals HV 0.2 less than HV 5 - Tables
German Institute for Standardization, Microhardness and Vickers Hardness
- DIN EN ISO 4516:2002-10 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002); German version EN ISO 4516:2002
- DIN EN ISO 14271:2018-01 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017); German version EN ISO 14271:2017
- DIN EN ISO 4516:2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002); German version EN ISO 4516:2002
- DIN EN ISO 14271:2018 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
- DIN ISO 3878:1991 Hardmetals; Vickers hardness test; identical with ISO 3878:1983
- DIN EN ISO 4498:2010-11 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010); German version EN ISO 4498:2010
- DIN EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003); German version EN ISO 868:2003
- DIN EN ISO 868:2003-10 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003); German version EN ISO 868:2003
- DIN EN ISO 6507-4:2018-07 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018); German version EN ISO 6507-4:2018
- DIN ISO 4498:2005 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2005);English version of DIN ISO 4498:2005
- DIN EN ISO 4498:2007 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2005); German version EN ISO 4498:2007
- DIN EN 59:1977 Glass Reinforced Plastics; Measurement of Hardness by Means of a Barcol Impressor
- DIN EN ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection and seam welds (ISO 14271:2011); German version EN ISO 14271:2011
- DIN EN ISO 14271:2012 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection and seam welds (ISO 14271:2011 + Cor 1:2012); German version EN ISO 14271:2011 + AC:2012
- DIN EN ISO 21509:2015-10 Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006); German version EN ISO 21509:2015
- DIN 30999:1999 Hardmetals - Rockwell test (scales A and 45N) - Calibration of reference blocks out of hardmetals to be used for the verification and calibration of hardness testing machines
KR-KS, Microhardness and Vickers Hardness
- KS B ISO 14271-2019 Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
- KS M ISO 6441-1-2002 Paints and varnishes－Determination of micro－indentation hardness－Part 1：Knoop hardness by measurement of indentation length
- KS M ISO 6441-2-2002 Paints and varnishes－Determination of micro－indentation hardness－Part 2：Knoop hardness by measurement of indentation depth under load
- KS M ISO 868-2016 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
- KS D ISO 4498-2010 Sintered metal materials, excluding hardmetals－Determination of apparent hardness and microhardness
ES-UNE, Microhardness and Vickers Hardness
- UNE-EN ISO 14271:2018 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
- UNE-EN ISO 6507-4:2018 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018)
- UNE-EN ISO 21509:2016 Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006)
Professional Standard - Machinery, Microhardness and Vickers Hardness
- JB/T 9372-1999 Reference blocks of Vickers microhardness
- JB/T 9398-1999 Specifications for Vickers microhardness testers
- JB/T 7709-2007 Inspection method of microstructure, hardeness and depth of boronized layer
- JB/T 7709-1995 Detection method of microstructure, hardness and layer depth of boronizing layer
Lithuanian Standards Office , Microhardness and Vickers Hardness
- LST EN ISO 4516:2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002)
- LST EN ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2011)
- LST EN ISO 14271:2011/AC:2012 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds - Technical Corrigendum 1 (ISO 14271:2011/Cor.1:2012)
- LST EN 23878-2000 Hardmetals - Vickers hardness test (ISO 3878:1983)
- LST EN ISO 868:2004 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
- LST EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010)
- LST EN ISO 6507-4:2006 Metallic materials - Vickers hardness test - Part 4: Tables and hardness values (ISO 6507-4:2005)
AENOR, Microhardness and Vickers Hardness
- UNE-EN ISO 4516:2002 Metallic and other inorganic coatings -- Vickers and Knoop microhardness tests. (ISO 4516:2002)
- UNE-EN 23878:2001 HARDMETALS. VICKERS HARDNESS TEST. (ISO 3878:1983).
- UNE 37211:1983 VICKERS MICOHARDNESS MEASUREMENT IN LEAD SHOT.
- UNE-EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
- UNE-EN ISO 4498:2011 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010)
- UNE-EN ISO 6507-4:2007 Metallic materials - Vickers hardness test - Part 4: Tables and hardness values (ISO 6507-4:2005)
YU-JUS, Microhardness and Vickers Hardness
- JUS C.A4.040-1986 Mechanical testing of metals. Hardness test. Vickers test (HV 0,2 to less than HV 5)
- JUS C.A4.033-1986 Tables of Vtckers hardness values for use In testmade on flatsurfaces —HV 5 to HV 100
- JUS C.A4.030-1986 Mechanical testing of metals. Hardness test Vickers test (HV 5 to HV 100)
- JUS C.A4.043-1986 Mechanical testing ofmetals. Tablesof Vickershardness values. HV 0,2 to less than HV 5
- JUS C.A4.099-1995 Mechanical testing of metals - Calibration of standardized for verification of Vickers bardness testing machines: less than HV 0,2
- JUS C.A4.098-1995 Mechanical testing of metals - Tables of Vickers hardness values for use in tests made on flat surfaces - Less than HV 0,2
- JUS G.S2.125-1986 Rubber. Determination of Indentation hardness of a durometer (hardness Shore A and D)
- JUS C.A4.050-1986 Mechanical testing of meta/s. Vickcrs hardness test of hardmetals
- JUS G.S2.527-1984 Plastics. Determination of hardness by the ball indentation method. Rockwell hardness
- JUS M.Z0.502-1987 Verification of Vickers hardness testing machines HV02 to HV 100
GM North America, Microhardness and Vickers Hardness
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Microhardness and Vickers Hardness
- GB 9790-1988 Metallic and related coatings--Vickers and Knoop microhardness tests
- GB/T 9790-1988 Metallic and related coatings--Vickers and knoop microhardness tests
- GB/T 7997-2014 Hardmetals.Vickers hardness test
- GB/T 7997-1987 Hardmetals--Vickers hardness test
- GB/T 9097-2016 Sintered metal materials, excluding hardmetals.Determination of apparent hardness and mincrohardness
- GB/T 2411-2008 Plastics and ebonite.Determination of indentation hardness by means of a durometer(shore hardness)
- GB/T 4340.2-1999 Metallic vickers hardness test--Part 2: Verification of hardness testers
- GB/T 4340.4-2009 Metallic materials.Vickers hardness test.Part 4:Tables of hardness values
- GB/T 4340.3-1999 Metallic vickers hardness test--Part 3: Calibration of hardness reference blocks
- GB/T 16534-1996 Test method for Vickers hardness of high performance ceramics
- GB/T 4340.3-2012 Metallic materials.Vickers hardness test.Part 3:Calibration of reference blocks
- GB/T 4340.2-2012 Metallic materials.Vickers hardness test.Part 2:Verification and calibration of testing machines
ZA-SANS, Microhardness and Vickers Hardness
- SANS 4516:1980 Metallic and related coatings - Vickers and Knoop microhardness tests
- SANS 4516:2008 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests
- SANS 6507-4:2008 Metallic materials - Vickers hardness test Part 4: Tables of hardness values
CZ-CSN, Microhardness and Vickers Hardness
Professional Standard - Aviation, Microhardness and Vickers Hardness
- HB 5340-1989 Test method for micro-Vickers hardness of precious metals and their alloys for aviation
- HB 5173-1996 Metal Vickers Hardness Test Method
- HB 5173-1981 Metal Vickers Hardness Test Method
RO-ASRO, Microhardness and Vickers Hardness
IN-BIS, Microhardness and Vickers Hardness
国家市场监督管理总局、中国国家标准化管理委员会, Microhardness and Vickers Hardness
- GB/T 9790-2021 Metallic materials—Vickers and Knoop microhardness tests of metallic and other inorganic coatings
- GB/T 4340.4-2022 Metallic materials—Vickers hardness test—Part 4：Tables of hardness values
- GB/T 37900-2019 Test method of hardness and fracture toughness for ultra-thin glass—Low-load vickers hardness indentation method
BE-NBN, Microhardness and Vickers Hardness
Japanese Industrial Standards Committee (JISC), Microhardness and Vickers Hardness
GOSTR, Microhardness and Vickers Hardness
- GOST R 59262-2020 Brown coals, hard coals and anthracite. Method for determination of microhardness and microbrittleness
CEN - European Committee for Standardization, Microhardness and Vickers Hardness
- EN ISO 14271:2001 Vickers Hardness Testing of Resistance Spot@ Projection and Seam Welds (Low Load and Microhardness)
BR-ABNT, Microhardness and Vickers Hardness
PK-PSQCA, Microhardness and Vickers Hardness
VN-TCVN, Microhardness and Vickers Hardness
- TCVN 5047-1990 Hardmetals.Method of determination of hardness Vicker
- TCVN 4502-2008 Plastics and ebonite.Determination of indentation hardness by means of a durometer (Shore hardness)
- TCVN 258-4-2007 Metallic materials.Vickers hardness test.Part 4:Tables of hardness values
- TCVN 5728-1993 Measuring means of Vicker hardness.Verification schedules
- TCVN 258-3-2007 Metallic materials.Vickers hardness test.Part 3:Calibration of reference blocks
- TCVN 258-2-2007 Metallic materials.Vickers hardness test.Part 2:Test merhod
HU-MSZT, Microhardness and Vickers Hardness
NL-NEN, Microhardness and Vickers Hardness
RU-GOST R, Microhardness and Vickers Hardness
- GOST 25172-1982 Sintered hardmetals. Method of determination of Vickers hardness
- GOST 24621-2015 Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
- GOST 21206-1975 Coalsand anthracite. Determination method for microhardness and microbrittleness
- GOST 2999-1975 Metals and alloys. Vickers hardness teat by diamond pyramid
- GOST 9450-1976 Measurements microhardness by diamond instruments indentation
- GOST R ISO 22826-2012 Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness test)
CU-NC, Microhardness and Vickers Hardness
PT-IPQ, Microhardness and Vickers Hardness
Professional Standard - Coal, Microhardness and Vickers Hardness
- MT/T 264-1991 Method for Determination of Microhardness of Coal
- MT 264-1991 Method for Determination of Microhardness of Coal
TH-TISI, Microhardness and Vickers Hardness
- TIS 2245-2005 Plastics and ebonite.determination of indentation hardness by means of a durometer (shore hardness)
- TIS 2169.3-2004 Vickers hardness test for metallic materials.part 3: cakubration of reference blocks
- TIS 244.1-3-1977 Standard methods of test for iron and steel.part Ⅰ: vickers hardness test for steel.part Ⅱ: brinell hardness test for steel and cast iron.part Ⅲ: rockwell hardness test for steel (b and c scales)
PL-PKN, Microhardness and Vickers Hardness
- PN H04357-1993 Steel and cast steel. Comparative tables of the Rockwell, Vickers, Brinell and Shore. Hardnes and tensile strength values
- PN B13150-1970 Glass Methodi of te?t Determination of micro-hardneis
- PN H04360-1991 Hardness-Vickers test for metallic materials HV0,2 to HV100
FI-SFS, Microhardness and Vickers Hardness
(U.S.) Ford Automotive Standards, Microhardness and Vickers Hardness
Professional Standard - Light Industry, Microhardness and Vickers Hardness
- QB/T 3822-1999 Hardness testing method of the metal deposits for the light industrial products.Microscopic hardness tester method
- QB/T 4780-2015 Test method for Vickers hardness of domestic ceramic glaze
- QB/T 3731-1999 Standard test method for vickers hardness of glazed domestic ceramic ware
ES-AENOR, Microhardness and Vickers Hardness
American National Standards Institute （ANSI), Microhardness and Vickers Hardness
National Metrological Technical Specifications of the People's Republic of China, Microhardness and Vickers Hardness
- JJF 1249-1990 Vickers Hardness Benchmark Operating Technical Specifications
- JJF 1252-1990 Technical specification for microscope hardness benchmark operation
- JJF 1250-1990 Vickers Hardness Vice Benchmark Operating Technical Specifications
未注明发布机构, Microhardness and Vickers Hardness
- DIN EN ISO 6507-3 Bei 1:1998 Metallic materials – Hardness test according to Vickers – Part 3: Calibration of hardness reference plates
- DIN EN ISO 6507-3:1998 Metallic materials hardness testing according to Vickers DIN Part 3: Calibration of hardness reference plates
Professional Standard - Aerospace, Microhardness and Vickers Hardness
- QJ 482-1979 Test method for microhardness of metal coatings
- QJ 482-1990 Test method for microhardness of metal coatings
AASHTO - American Association of State Highway and Transportation Officials, Microhardness and Vickers Hardness
- T 80-2008 Standard Method of Test for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
- T 80-1994 Standard Method of Test for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
- T 80-2006 Standard Method of Test for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
KE-KEBS, Microhardness and Vickers Hardness
- KS 06-70-1978 KENYA STANDARD SPECIFICATION FOR VICKERS HARDNESS TEST
Standard Association of Australia （SAA）, Microhardness and Vickers Hardness
- AS 1817.1:2003 Metallic materials - Vickers hardness test - Test methods (ISO 6507-1:1997, MOD)
Professional Standard-Ships, Microhardness and Vickers Hardness
AT-ON, Microhardness and Vickers Hardness
- ONORM C 9433 Teil.2-1982 Testing of elastomers; determination of ball indentation hardness (IRHD) of soft rubber; nricro hardness fest
Professional Standard - China Metal Association, Microhardness and Vickers Hardness
Professional Standard - Nuclear Industry, Microhardness and Vickers Hardness
- EJ/T 20150.26-2018 Post-irradiation inspection of pressurized water reactor bundle fuel assemblies-Part 26: Micro-Vickers hardness test for fuel cladding tubes