ZH

RU

ES

Three methods for the determination of solubility

Three methods for the determination of solubility, Total:499 items.

In the international standard classification, Three methods for the determination of solubility involves: Quality, Pulps, Textile fibres, Waxes, bituminous materials and other petroleum products, Paint ingredients, Water quality, Products of the chemical industry, Milk and milk products, Air quality, Road engineering, Surface treatment and coating, Construction materials, Plastics, Fuels, Materials for the reinforcement of composites, Products of the textile industry, Natural gas, Metalliferous minerals, Burners. Boilers, Coals, Insulating fluids, Welding, brazing and soldering, Lubricants, industrial oils and related products, Textile auxiliary materials, Non-metalliferous minerals, Analytical chemistry, Fertilizers, Earthworks. Excavations. Foundation construction. Underground works, Farming and forestry, Wastes, Tea. Coffee. Cocoa, Crude petroleum, Glass, Laboratory medicine, Adhesives, Animal feeding stuffs, Linear and angular measurements, Electronic components in general, Metrology and measurement in general, Raw materials for rubber and plastics, Leather technology, Organic chemicals, Structures of buildings, Soil quality. Pedology, Sugar. Sugar products. Starch, Non-ferrous metals, Integrated circuits. Microelectronics, Rubber and plastics products, Geology. Meteorology. Hydrology, Microbiology, Ferrous metals, Paper and board, Cereals, pulses and derived products, Inorganic chemicals, Equipment for petroleum and natural gas industries, Petroleum products in general, Protection against dangerous goods, Radiation measurements, Road vehicle systems, Fruits. Vegetables, Nuclear energy engineering.


Korean Agency for Technology and Standards (KATS), Three methods for the determination of solubility

  • KS Q ISO TR 13587:2021 Three statistical approaches for the assessment and interpretation of measurement uncertainty
  • KS M 2256-2007(2017) Testing method for solubility of bituminous materials in trichloroethane
  • KS M ISO 7579-2012(2017) Dyestuffs ㅡ Determination of solubility in organic solvents ㅡ Gravimetric and photometric methods
  • KS I ISO 5813-2014(2019) Water quality — Determination of dissolved oxygen — Iodometric method
  • KS M ISO 7579:2012 Dyestuffs ㅡ Determination of solubility in organic solvents ㅡ Gravimetric and photometric methods
  • KS M 2256-2007(2022) Testing method for solubility of bituminous materials in trichloroethane
  • KS M ISO 7579:2022 Dyestuffs — Determination of solubility in organic solvents — Gravimetric and photometric methods
  • KS D ISO 2177-2002(2017) Measurement of coating thickness - Coulometric method by anodic dissolution
  • KS I ISO 10530:2007 Water quality-Determination of dissolved sulfide-Photometric method using methylene blue
  • KS I ISO 10530-2007(2017) Water quality-Determination of dissolved sulfide-Photometric method using methylene blue
  • KS E ISO 13291:2007 Zinc sulfide concentrates-Determination of zinc content-Solvent extraction and EDTA titrimetric method
  • KS B ISO 9455-11-2002(2017) Soft soldering fluxes-Test methods-Part 11 : Solubility of flux residues
  • KS M 0169-2021 Determination of the hexavalent chromium in polymers by UV-visible spectrophotometry(organic solvent dissolution method)
  • KS E ISO 15249:2011 Zinc sulfide concentrates-Determination of gold content-Acid dissolution/solvent extraction/flame atomic absorption spectrometric method
  • KS I ISO 14911:2022 Water quality — Determination of dissolved Li +, Na +, NH4 +, K +, Mn 2+, Ca 2+, Mg 2+, Sr 2+ and Ba 2+ using ion chromatography — Method for water and waste water
  • KS F 2325-2002(2017) Testing method for flexural strength of soil-cement using simple beam with third point loading
  • KS F 2325-2002(2022) Testing method for flexural strength of soil-cement using simple beam with third point loading

KR-KS, Three methods for the determination of solubility

  • KS Q ISO TR 13587-2021 Three statistical approaches for the assessment and interpretation of measurement uncertainty
  • KS M ISO 7579-2022 Dyestuffs — Determination of solubility in organic solvents — Gravimetric and photometric methods
  • KS I ISO 10530-2023 Water quality — Determination of dissolved sulfide — Photometric method using methylene blue
  • KS I ISO 14911-2022 Water quality — Determination of dissolved Li +, Na +, NH4 +, K +, Mn 2+, Ca 2+, Mg 2+, Sr 2+ and Ba 2+ using ion chromatography — Method for water and waste water
  • KS K 6323-2017(2022) Textiles-Test method for assessing the smoothness appearance of seams in fabrics using three-dimensional measuring apparatus

Danish Standards Foundation, Three methods for the determination of solubility

  • DS/ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
  • DS/EN ISO 7579:2010 Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods
  • DS/ISO 4292:1990 Methods for the assessment of departure from roundness - Measurement by two- and three-point methods
  • DS/EN ISO 11206:2013 Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR)
  • DS/EN 13649:2002 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method
  • DS/EN ISO 14911:2000 Water quality - Determination of dissolved Li+,Na+,NH4+,K+,Mn2+,Ca2+,Mg2+,Sr2+ and Ba2+ using ion chromatography - Method for water and waste water
  • DS/EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography

British Standards Institution (BSI), Three methods for the determination of solubility

  • PD ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
  • BS 4499:1984 Method for determination of alkali solubility of pulp
  • BS 3568:1988 Method for determination of solubility of wool in alkali
  • BS EN ISO 7579:2009 Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods
  • BS EN 25814:1992 Method for determination of dissolved oxygen in water: electrochemical probe method
  • BS 6829-1.6:1991 Analysis of surface active agents (raw materials). General methods. Method for determination of solubility in water
  • BS EN 196-8:2010 Methods of testing cement - Heat of hydration - Solution method
  • BS EN 196-10:2006 Methods of testing cement - Determination of the water soluble chromium (VI) content of cement
  • BS EN 1165:1997 Feather and down - Test methods - Determination of water-soluble chlorides
  • BS EN ISO 19340:2017 Water quality. Determination of dissolved perchlorate. Method using ion chromatography (IC)
  • BS 6049-7:1981 Methods of test for tea. Determination of alkalinity of water-soluble ash
  • BS EN 15749:2009 Fertilizers - Determination of sulfates content using three different methods
  • BS EN 15471:2007 Liquefied petroleum gases - Determination of dissolved residues - High-temperature gravimetric method
  • BS EN 772-5:2002 Methods of test for masonry units - Determination of the active soluble salts content of clay masonry units
  • BS EN 772-5:2016 Methods of test for masonry units. Determination of the active soluble salts content of clay masonry units
  • BS 4044:1989 Methods for determination of fibre length by comb sorter diagram
  • BS EN 1164:1999 Feather and down - Test methods - Determination of the turbidity of an aqueous extract
  • BS EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography
  • BS EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by solvent desorption and gas chromatography
  • BS EN 14662-5:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by solvent desorption and gas chromatography
  • BS EN 14662-2:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography
  • BS 4285-3.4.2:1989 Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Enumeration of lipolytic microorganisms - Tributyrin agar method
  • BS 6986-2:1988 Analysis of instant tea. Methods for determination of free-flow and compacted bulk densities
  • BS EN 17181:2019 Lubricants. Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution. Test method based on CO2-production
  • BS 4427-1:1969 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Determination of matter insoluble in water in sodium tripolyphosphate
  • BS 6069-3.3:1991 Characterization of air quality. Workplace atmospheres. Method for the determination of vaporous chlorinated hydrocarbons by charcoal tube/solvent desorption/gas chromatography
  • BS 6069-3.4:1991 Characterization of air quality. Workplace atmospheres. Method for the determination of vaporous aromatic hydrocarbons by charcoal tube/solvent desorption/gas chromatography
  • BS EN 480-10:2010 Admixtures for concrete, mortar and grout. Test methods. Determination of water soluble chloride content
  • BS EN 480-10:2009 Admixtures for concrete, mortar and grout - Test methods - Determination of water soluble chloride content
  • BS 7079-B12:2003 Preparation of steel substrates before application of paints and related products - Methods for the assessment of surface cleanliness - Field method for the titrimetric determination of water-soluble ferrous ions
  • BS 6049-7:1980 Methods of test for tea. Determination of alkalinity of water-soluble ash
  • BS 4285 SubSec.3.4.2:1989 Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Enumeration of lipolytic microorganisms. Tributyrin agar method
  • BS 6043-3.5.1:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method
  • BS EN ISO 11206:2013 Water quality. Determination of dissolved bromate. Method using ion chromatography (IC) and post column reaction (PCR)
  • BS EN ISO 787-28:2020 General methods of tests for pigments and extenders - Determination of total content of polychlorinated biphenyls (PCB) by dissolution, cleanup and GC-MS
  • BS 5688-18:1979 Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use - Determination of rate of solution of sodium perborates
  • BS 5752-11:1987 Methods of test for coffee and coffee products. Instant coffee: determination of free-flow and compacted bulk densities
  • BS 4427-5:1974 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Determination of particle size distribution

AENOR, Three methods for the determination of solubility

  • UNE 40204:1972 METHOD TO DETERMINE ALKALINE SOLUBILITY OF WOOL.
  • UNE 40205:1972 METHOD TO DETERMINE WOOL SOLUBILITY IN UREA-BISULPHITE.
  • UNE-EN ISO 7579:2010 Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods (ISO 7579:2009)
  • UNE-EN 29455-11:1996 Soft soldering fluxes - Test methods - Part 11: Solubility of flux residues (ISO 9455-11:1991)
  • UNE-EN ISO 11206:2013 Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR) (ISO 11206:2011)
  • UNE 40241-2:1975 PRECISIONS IN THE METHOD OF DETERMINING THE CONTENT IN CISTERNIC ACID OF HYDROLIZED OF WOOL BY MEANS OF ELECTROPHORESIS ON PAPER AND COLOURIMETRY.
  • UNE 57039-1:1992 PULPS. CELLULOSE IN DILUTE SOLUTIONS. DETERMINATION OF LIMITING VISCOSITY NUMBER. PART 1: METHOD IN CUPRI-ETHYLENE-DIAMIDE (CED) SOLUTION.
  • UNE 64013:1971 MIXED FEEDS AND RAW MATERIALS. QUANTITATIVE DETERMINATION OF HUMIDITY AND VOLATILE MATTER. PREVIOUS DISSECATION METHOD.
  • UNE 55581:1980 SURFACE ACTIVE AGENTS. SODIUM CARBONATE FOR USE AS RAW-MATERIAL IN DETERGENT FORMULATIONS. DETERMINATION OF TOTAL SOLUBLE ALKALINITY. TITRIMETRIC METHOD

VN-TCVN, Three methods for the determination of solubility

  • TCVN 7500-2005 Bitumen.Test method for solubility in trichloroethylene
  • TCVN 4404-1987 Cultivated soil.Methods for determination of hydrolytic acidity
  • TCVN 6637-2000 Water quality.Determination of dissolved sulfide.Photometric method using methylen blue
  • TCVN 5715-1993 Rice.Method of determination for gelatinization temperature by alkali digestibility
  • TCVN 5285-1990 Animal feeding stuffs.Method for determination of soluble and hydrolysable carbohydrates content by antrone reagent
  • TCVN 6129-1996 Pulses.Determination of impurities, size, foreign odours, insects, and species and variety.Test methods

RU-GOST R, Three methods for the determination of solubility

  • GOST 32059-2013 Bituminous materials. Determination of solubility in trichloroethylene
  • GOST 30305.4-1995 Dry dairy products. The procedure of measurement of solubility index
  • GOST 30648.6-1999 Infant milk products. Method for determination of solubility index
  • GOST 31958-2012 Water. Methods for determination of total and dissolved organic carbon
  • GOST R 52991-2008 Water. Methods for determination of total and dissolved organic carbon
  • GOST 10650-2013 Peat. Methods for the determination of the disintegration degree
  • GOST 28935-1991 Solid fuel. Method for the determination of sodium and potassium soluble in dilute hydrochloric acid
  • GOST 33135-2014 Automobile roads of general use. Viscous petroleum road bitumens. Method for determination of solubility
  • GOST R 53582-2009 Soils. Method of determination of thawing soil shear resistance
  • GOST 12037-1981 Seed of farm crops. Methods for determination of purity and seed lot impurity
  • GOST 30025-1993 Seeds of essential oil crops. Method for determination of purity and seed lot impurity
  • GOST 12045-1997 Seeds of agricultural plants. Methods of determination of infested seeds
  • GOST 12045-1981 Seed of farm crops. Methods of determination for pest infestation
  • GOST 18249-1972 Plastics. Method for viscosity determination of diluted polymer solution
  • GOST EN 15749-2013 Fertilizers. Determination of sulfates content using three different methods
  • GOST 26176-1991 Fodders, mixed feeds. Methods for determination of soluble and hidrolysable carbohydrates
  • GOST 21119.2-1975 General methods of test for pigments and extenders. Determination of soluble in water matters mass fraction
  • GOST R ISO 5725-4-2002 Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method
  • GOST 12576-1989 Sugar. Methods for determination of appearance, smell, smack and solution clleanness
  • GOST ISO 11643-2013 Leather. Tests for colour fastness. Method for determination of colour fastness of small samples to solvents
  • GOST R 54386-2011 Honey. Methods for determination of sucrase activity, of diastase activity, of insoluble matter
  • GOST 12395-1976 Pulp for insulating paper and board. Method for the determination of dynamic viscosity of copperammonium solution
  • GOST R ISO 5725-5-2002 Accuracy (trueness and precision) of measurement methods and results. Part 5. Alternative methods for the determination of the precision of a standard measurement method
  • GOST ISO 605-2013 Pulses. Determination of impurities, size, foreign, odours, insects, and species and variety. Test methods
  • GOST 32197-2013 Macaroni products. Methods for determining the colour and darkening on three coordinate colorimeter
  • GOST 30201-1994 Textile materials for filtration of industrial aerosols. Method of determination of the dust mass concentration behind filter
  • GOST 28666.3-1990 Cereals and pulses. Determination of hidden insect infestation. Part 3. Reference method
  • GOST 33092-2014 Petroleum products. Test method for color by the automatic tristimulus spectrophotometer

IN-BIS, Three methods for the determination of solubility

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Three methods for the determination of solubility

  • GB/T 12680.3-1990 Test method for the solubility in ethanol of alcohol soluble dyes
  • GB/T 1639-1979 Determination of solubility of solubilised reduced dyes
  • GB/T 21879-2015 Water-soluble dyes.Determination of solubility.Drop test of filter papers
  • GB/T 21879-2008 Water-soluble dyes.Determination of solubility.Drop test of filter papers
  • GB/T 43108-2023 Determination of solubility of dyes in organic solvents by gravimetric and photometric methods
  • GB/T 16081-1995 Workplace air--Determination of trichloromethane--Solvent desorption gas chromatographic method
  • GB/T 6006.1-2001 Test method for glass mats Part 1: Determination of styrene solubility
  • GB/T 6006.1-2013 Test method for glass mats.Part 1:Determination of styrene solubility
  • GB/T 12157-1989 Analysis of water used in boiler and cooling system--Determination for dissolved oxygen--Internal electrolysis
  • GB/T 8152.1-2006 Methods for chemical analysis of lead concentrates.Determination of lead content.EDTA titration method after acid digestion
  • GB/T 16044-1995 Workplace air--Determination of benzene--Solvent desorption gas chromatographic method
  • GB/T 16056-1995 Workplace air--Determination of naphthalene--Solvent desorption gas chromatographic method
  • GB/T 16073-1995 Workplace air--Determination of phenol--Solvent desorption gas chromatographic method
  • GB/T 17074-1997 Workplace air--Determination acetaldehyde--Solvent desorption gas chromatographic method
  • GB/T 16061-1995 Workplace air--Determination of butanone--Solvent desorption gas chromatographic method
  • GB/T 16096-1995 Workplace air--Determination of acetonitrile--Solvent desorption gas chromatographic method
  • GB/T 16059-1995 Workplace air--Determination of acetone--Solvent desorption gas chromatographic method
  • GB/T 16047-1995 Workplace air--Determination of toluene--Solvent desorption gas chromatographic method
  • GB/T 17075-1997 Workplace air--Determination of butyl alcohol--Solvent desorption gas chromatographic method
  • GB/T 17091-1997 Worplace air--Determination of butanone--Solvent desorption gas chromatographic method
  • GB/T 12680.1-1990 Test method for the relative strength and shade of alcohol soluble dyes
  • GB/T 17076-1997 Workplace air--Determination of isobutyl alcohol--Solvent desorption gas chromatographic method
  • GB/T 17073-1997 Workplace air--Determination of cyclohexanone--Solvent desorption gas chromatographic method
  • GB/T 16042-1995 Workplace air--Determination of cyclohexane--Solvent desorption gas chromatographic method
  • GB/T 16097-1995 Workplace air--Determination of acrylonitrile--Solvent desorption gas chromatographic method
  • GB/T 16039-1995 Workplace air--Determination of solvent naphthas--Thermal desorption gas chromatographic method
  • GB/T 16053-1995 Workplace air--Determination of styrene--Solvent desorption gas chromatographic method
  • GB/T 16050-1995 Workplace air--Determination of xylene--Solvent desorption gas chromatographic method
  • GB/T 16121-1995 Workplace air--Determination of parathion--Solvent desorption gas chromatographic method
  • GB/T 16120-1995 Workplace air--Determination of dichlorvos--Solvent desorption gas chromatographic method
  • GB/T 16122-1995 Workplace air--Determination of phorate--Solvent desorption gas chromatographic method
  • GB/T 17082-1997 Workplace air--Determination of butyl acetate--Solvent desorption gas chromatographic method
  • GB/T 17083-1997 Workplace air--Determination of amyl acetate--Solvent desorption gas chromatographic method
  • GB/T 17080-1997 Workplace air--Determination of methyl acetate--Solvent desorption gas chromatographic method
  • GB/T 17081-1997 Workplace air--Determination of propyl acetate--Solvent desorption gas chromatographic method
  • GB/T 17079-1997 Workplace air--Determination of methyl acetate--Solvent desorption gas chromatographic method
  • GB/T 16083-1995 Workplace air--Determination of carbon tetrachloride--Solvent desorption gas chromatographic method
  • GB/T 17077-1997 Workplace air--Determination of dimethyl sulphate--Solvent desorption liquid chromatographic method
  • GB/T 17092-1997 Workplace air--Determination of ethyl acrylate--Solvent desorption gas chromatographic method
  • GB/T 17088-1997 Workplace air--Determination of N-methylaniline--Solvent desorption gas chromotrographic method
  • GB/T 17089-1997 Workplace air--Determination of N, N-dimethylaniline--Solvent desorption gas chromatographic method
  • GB/T 13255.1-2009 Test methods of caprolactam for industrial use.Part 1:Determination of colourity of 50% aqueous caprolactam solution.Spectrometric method
  • GB/T 8151.26-2023 Methods of Chemical Analysis of Zinc Concentrates Part 26: Determination of Silver Content by Acid Dissolution-Flame Atomic Absorption Spectrometry
  • GB/T 14634.5-2010 Test methods of rare earth three-band phosphors for fluorescent lamps.Part 5:Determination of density
  • GB/T 3253.1-2008 Methods for chemical analysis of antimony and antimony trioxide.Determination of arsenic content.Arsenic molybdenum blue spectrophotometric method
  • GB/T 1819.9-2004 Methods for chemical analysis of tin concentrates Determination of tungsten trioxide content-The thiocyanate spectrophotometric method
  • GB/T 3884.17-2014 Methods for chemical analysis of copper concentrates.Part 17:Determination of aluminium oxide content.Chromazurol S spectrophotometric method and precipitation separation-fluoride salts device-Na<下标2>EDTA titrimetric method
  • GB/T 8857-1988 Method for determination of total ash and of alkalinity of total ash and water-soluble ash in fruit and vegetable products
  • GB/T 22052-2008 Test method for vapor pressure-temperature relationship and initial decompostition temperature of liquids by isoteniscope

International Organization for Standardization (ISO), Three methods for the determination of solubility

  • ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
  • ISO 7579:2009 Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods
  • ISO 7579:1990 Dyestuffs; determination of solubility in organic solvents; gravimetric method
  • ISO/CD 18724:2023 Water quality — Determination of dissolved chromium(VI) in water — Photometric method
  • ISO 10530:1992 Water quality; determination of dissolved sulfide; photometric method using methylene blue
  • ISO 29582-1:2009 Methods of testing cement - Determination of the heat of hydration - Part 1: Solution method
  • ISO 9455-11:2017 Soft soldering fluxes — Test methods — Part 11: Solubility of flux residues
  • ISO/R 1628:1970 Plastics — Directives for the standardization of methods for the determination of the dilute solution viscosity of polymers
  • ISO 13752:1998 Air quality - Assessment of uncertainty of a measurement method under field conditions using a second method as reference
  • ISO 9197-2:1990 Paper, board and pulps; determiantion of water-soluble chlorides; part 2: method for high purity products
  • ISO 11206:2011 Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR)

European Committee for Standardization (CEN), Three methods for the determination of solubility

  • EN ISO 7579:2009 Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods (ISO 7579:2009)
  • EN ISO 7579:1996 Dyestuffs - Determination of Solubility in Organic Solvents - Gravimetric Method ISO 7579: 1990
  • EN 1165:1996 Feather and down - Test methods - Determination of water-soluble chlorides
  • PD CEN/TS 15749:2008 Fertilizers - Determination of sulfates content using three different methods
  • EN 196-10:2006 Methods of testing cement - Part 10: Determination of the watersoluble chromium (VI) content of cement
  • EN 196-10:2016 Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement
  • EN 15749:2009 Fertilizers - Determination of sulfates content using three different methods
  • EN 13649:2001 Stationary Source Emissions - Determination of the Mass Concentration of Individual Gaseous Organic Compounds - Activated Carbon and Solvent Desorption Method
  • EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography
  • EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography
  • EN ISO 11206:2013 Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR)
  • EN ISO 10304-4:2022 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO 10304-4:2022)

Association Francaise de Normalisation, Three methods for the determination of solubility

  • NF T30-009*NF EN ISO 7579:2009 Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric method.
  • NF EN ISO 7579:2009 Colorants - Détermination de la solubilité dans les solvants organiques - Méthodes gravimétrique et photométrique
  • NF EN 1015-17:2001 Méthodes d'essai des mortiers pour maçonnerie - Partie 17 : détermination de la teneur en chlorure soluble des mortiers frais
  • NF EN 1015-17/A1:2005 Méthodes d'essai des mortiers pour maçonnerie - Partie 17 : détermination de la teneur en chlorure soluble des mortiers frais
  • NF G06-020:1971 Textiles. Tests for fibres. Determination of the solubility of wool in urea bisulfite.
  • NF U42-502*NF EN 15749:2010 Fertilizers - Determination of sulfates content using three different methods.
  • NF EN ISO 9455-11:2017 Flux de brasage tendre - Méthodes d'essai - Partie 11 : solubilité des résidus de flux
  • NF T20-046:1985 Chemical products for industrial use. Determination of hydrosolubility of solids and liquids at heigh solubility. Flask method.
  • NF T20-045:1985 Chemical products for industrial use. Determination of hydrosolubility of solids and liquids at low solubility. Column elution method.
  • XP T90-319:1995 Testing waters - Evaluation in an aqueous medium of biodegradable dissolved organic carbon - Method using fixed bacteria
  • NF EN ISO 11206:2013 Qualité de l'eau - Détermination du bromate dissous - Méthode utilisant la chromatographie ionique (IC) et la réaction post-colonne (PCR)
  • NF T90-131:1986 TESTING WATER. DETERMINATION OF TOTAL MERCURY BY FLAMELESS ATOMIC ABSORPTION SPECTROMETRY. METHOD AFTER DIGESTION WITH BROMINE.
  • NF T57-502:1995 Fibres de renfort - Verre textile - Détermination du taux d'ensimage soluble dans l'acétone - Méthodes du ballon.
  • NF T76-140-2:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2 : determination of volatile organic compounds.
  • NF EN 17181:2019 Lubrifiants - Détermination de la biodégradabilité aérobie, en solution aqueuse, de lubrifiants complètement formulés - Méthode basée sur le dégagement de CO2
  • NF P94-048:1996 Sols : reconnaissance et essais - Détermination de la teneur en carbonate - Méthode du calcimètre
  • NF T76-140-4/IN1*NF EN 13999-4/IN1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4 : determination of volatile diisocyanates.
  • NF Q50-020*NF ISO 5351:2010 Pulps - Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution.
  • NF T60-638*NF EN 17181:2019 Lubricants - Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution - Test method based on CO2-production
  • NF EN ISO 17678:2019 Lait et produits laitiers - Détermination de la pureté des matières grasses laitières par analyse chromatographique en phase gazeuse des triglycérides (Méthode de référence)
  • NF T90-226*NF EN ISO 11206:2013 Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR)
  • NF ISO 13752:1998 Qualité de l'air - Évaluation de l'incertitude d'une méthode de mesurage sur site en utilisant une seconde méthode comme référence

CZ-CSN, Three methods for the determination of solubility

  • CSN 66 6138-1985 Surface active agents. Methods for determination of turbidity temperature of water solutions
  • CSN 67 0542-1974 Determination of mattei soluble in water. Cold extraction method in pigments
  • CSN 66 6615-1983 Determination of resolving power of the photographic materials on transparent base, statical and dynamical methods
  • CSN 46 7092-31-1998 Testing methods for feeding stuffs - Part 31: Determination of solubility index in milk feeding mixtures
  • CSN 68 1142-1994 Testing methods for surfactans and detergents. Determination of ethanol-soluble matters in liquid detergents
  • CSN ISO 697:1994 Surface active agents. Washing powders. Determination of apparent density. Method by measuring of a given volume
  • CSN 46 7092-30-1998 Testing methods for feeding stuffs - Part 30: Determination of the water extract acidity in milk feeding mixtures stuffs

化学工业部, Three methods for the determination of solubility

  • HG 2258-1991 Method for determination of solubility of couplers

Professional Standard - Coal, Three methods for the determination of solubility

  • MT/T 370-1994 Determination method of dissolved oxygen in coal mine water

The American Road & Transportation Builders Association, Three methods for the determination of solubility

AASHTO - American Association of State Highway and Transportation Officials, Three methods for the determination of solubility

  • T 44-2013 Standard Method of Test for Solubility of Bituminous Materials
  • T 44-2003 Standard Method of Test for Solubility of Bituminous Materials
  • T 44-2014 Standard Method of Test for Solubility of Bituminous Materials
  • T 44-1994 Standard Method of Test for Solubility of Bituminous Materials (ASTM D2042-81)

American Society for Testing and Materials (ASTM), Three methods for the determination of solubility

  • ASTM D7553-09 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide
  • ASTM D5492-17 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics
  • ASTM D7553-10 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide
  • ASTM D2042-22 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene or Toluene
  • ASTM D5546-94a Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
  • ASTM D5546-01 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
  • ASTM D5546-09 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
  • ASTM D2779-92(1997) Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids
  • ASTM D2779-92(2020) Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids
  • ASTM D5462-01 Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water
  • ASTM D5462-21 Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water
  • ASTM D2780-92(1997) Standard Test Method for Solubility of Fixed Gases in Liquids
  • ASTM D3429-93(2002)e1 Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
  • ASTM D3429-93(2007) Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
  • ASTM D3429-93(2012) Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
  • ASTM D1696-95(2011) Standard Test Method for Solubility of Cellulose in Sodium Hydroxide
  • ASTM D1696-95(2019)e1 Standard Test Method for Solubility of Cellulose in Sodium Hydroxide
  • ASTM D2349-90(2003) Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints
  • ASTM D2349-90(1997) Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints
  • ASTM D2349-90(2020) Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints
  • ASTM D234-82(1998) Standard test method for qualitative determination of the properties of solvent composition in solvent-degradable coatings
  • ASTM D3635-13(2021) Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • ASTM D5661-95 Standard Test Method for Relative Solvency of Petroleum Oils by the PKP Method
  • ASTM D4056-00 Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
  • ASTM B680-80(2004) Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
  • ASTM D3429-93(1998) Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
  • ASTM D3635-01(2005) Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • ASTM D3635-01 Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • ASTM D3635-90(1998) Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • ASTM D5511-94 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
  • ASTM D5511-11 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
  • ASTM D5511-12 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
  • ASTM D5492-10 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics
  • ASTM D3827-92(2020) Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids
  • ASTM D3635-13 Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • ASTM B680-80(2014) Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
  • ASTM B680-80(2009) Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
  • ASTM C1662-10 Standard Practice for Measurement of the Glass Dissolution Rate Using the Single-Pass Flow-Through Test Method
  • ASTM B680-80(2000) Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
  • ASTM B680-80(2019) Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
  • ASTM D4056-01 Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
  • ASTM D4056-92(1997)e1 Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
  • ASTM D4056-01(2006) Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
  • ASTM D4056-16 Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
  • ASTM D5511-02 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
  • ASTM D789-07e1 Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)
  • ASTM D7317-06 Standard Test Method for Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
  • ASTM D789-07 Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)
  • ASTM D5062-96(2001) Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
  • ASTM D5062-09 Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
  • ASTM D3616-95(2000) Standard Test Method for Rubber, Raw-Determination of Gel, Swelling Index, and Dilute Solution Viscosity
  • ASTM D3616-95(2019) Standard Test Method for Rubber—Determination of Gel, Swelling Index, and Dilute Solution Viscosity
  • ASTM D6402-99 Standard Test Method for Determing Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials
  • ASTM D6402-99(2004) Standard Test Method for Determing Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials
  • ASTM D2106-07(2022) Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
  • ASTM D6258-98(2003)e1 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
  • ASTM D6258-98e1 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
  • ASTM D6258-17 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
  • ASTM E2694-11 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
  • ASTM E2694-09 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
  • ASTM D2621-87(2000) Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
  • ASTM D2621-87(1995)e1 Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
  • ASTM D2621-87(2016) Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
  • ASTM D789-18 Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions
  • ASTM D789-19 Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions
  • ASTM D6802-02 Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry
  • ASTM D2106-05 Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
  • ASTM D2106-07(2017) Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
  • ASTM C1505-01 Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading
  • ASTM C1505-01(2007) Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading
  • ASTM D5232-13 Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
  • ASTM D3171-06 Standard Test Methods for Constituent Content of Composite Materials
  • ASTM D3171-99 Standard Test Methods for Constituent Content of Composite Materials
  • ASTM D5062-96 Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
  • ASTM D5062-09(2017) Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
  • ASTM D5062-09(2020) Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
  • ASTM D6258-09 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
  • ASTM D6919-17 Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
  • ASTM D6508-00(2005)e1 Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
  • ASTM D6508-00 Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
  • ASTM D6508-00(2005)e2 Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
  • ASTM D6802-02(2010) Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry
  • ASTM D4937-96(2021) Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography
  • ASTM D1823-95(2009) Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
  • ASTM D6919-03 Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
  • ASTM D6919-09 Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
  • ASTM D1823-95(2001) Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
  • ASTM D1823-95 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
  • ASTM D2106-07(2012) Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
  • ASTM D4937-96(2001) Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography
  • ASTM E2679-22 Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by Non-Aqueous Potentiometric Titration
  • ASTM C1318-95(2001) Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
  • ASTM D5202-02 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
  • ASTM D5202-08 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
  • ASTM D2106-00 Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
  • ASTM D6258-04 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
  • ASTM D6258-09(2014) Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
  • ASTM D6508-15 Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
  • ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
  • ASTM D4937-96(2012) Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography
  • ASTM F1770-97e1 Standard Test Method for Evaluation of Solubility, Diffusivity, and Permeability of Flexible Barrier Materials to Water Vapor (Withdrawn 2004)
  • ASTM D2106-07 Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
  • ASTM D2106-07e1 Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
  • ASTM D5666-95(2019) Standard Test Method for Rubber Chemical Antidegradants—Purity of p-Phenylenediamine (PPD) Antidegradants by High Performance Liquid Chromatography
  • ASTM D2879-83 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
  • ASTM D2879-86 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
  • ASTM D2879-18 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
  • ASTM C1343-96(2002) Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence
  • ASTM C1343-96 Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-Ray Fluorescence
  • ASTM D3616-95(2014) Standard Test Method for Rubber—Determination of Gel, Swelling Index, and Dilute Solution Viscosity
  • ASTM D3616-95(2004)e1 Standard Test Method for Rubber, Raw-Determination of Gel, Swelling Index, and Dilute Solution Viscosity
  • ASTM D3616-95(2009) Standard Test Method for Rubber, Raw-Determination of Gel, Swelling Index, and Dilute Solution Viscosity
  • ASTM D5202-91(1997) Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
  • ASTM D4937-96(2017) Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography
  • ASTM C1318-15a Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
  • ASTM D5666-95(2000) Standard Test Method for P-Phenylenediamine Antidegradants-Purity by High Performance Liquid Chromatography
  • ASTM D1635/D1635M-19 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading 
  • ASTM D1823-16 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
  • ASTM D6038-21 Standard Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point)
  • ASTM D6038-96 Standard Test Method for Determining the Compatability of Resin/Solvent Mixtures by Precipitation Temperature
  • ASTM F1769-97 Standard Test Method for Measurement of Diffusivity, Solubility, and Permeability of Organic Vapor Barriers Using a Flame Ionization Detector (Withdrawn 2004)
  • ASTM D1635-00(2006) Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
  • ASTM D1635-00 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
  • ASTM D1635/D1635M-12 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
  • ASTM C1343-16 Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence
  • ASTM D5523-21 Standard Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates
  • ASTM D5523-94(1999)e1 Standard Test Method for Polyurethane Raw Materials Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates
  • ASTM D5523-15 Standard Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates
  • ASTM D5666-95(2014) Standard Test Method for Rubber Chemical Antidegradants—Purity of p -Phenylenediamine (PPD) Antidegradants by High Performance Liquid Chromatography
  • ASTM C1413-99 Standard Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry
  • ASTM C1413-18 Standard Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry
  • ASTM D2879-92e1 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
  • ASTM D2879-96 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
  • ASTM D2879-97(2002)e1 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
  • ASTM D2879-97 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
  • ASTM D2879-97(2007) Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope

HU-MSZT, Three methods for the determination of solubility

Lithuanian Standards Office , Three methods for the determination of solubility

  • LST EN ISO 7579:2010 Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods (ISO 7579:2009)
  • LST ISO 10530:1998 Water quality. Determination of dissolved sulfide. Photometric method using methylene blue
  • LST EN 29455-11-2000 Soft soldering fluxes - Test methods - Part 11: Solubility of flux residues (ISO 9455-11:1991)
  • LST EN 13649-2002 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method
  • LST EN ISO 14911:2000 Water quality - Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography - Method for water and waste water (ISO 14911:1998)

SE-SIS, Three methods for the determination of solubility

  • SIS SS 02 81 88-1987 Determination of dissolved oxygen content in water - Electrochemical method
  • SIS 65 00 38-1960 Method or t lic dctermmation of the viscosity of cellulose conjugate solulions in ammoniacal copperhydroxide solution

Standard Association of Australia (SAA), Three methods for the determination of solubility

  • AS 1301.004:2019 Methods of test for pulp and paper, Method 004: Solubility of wood in boiling water
  • AS 2001.3.3:1978 Methods of test for textiles - Chemical tests - Determination of solubility of wool in alkali
  • AS 3550.1:1988 Methods for the analysis of waters - Determination of dissolved sulphide - Spectrophotometric method
  • AS 2891.7.2:1993 Methods of sampling and testig asphalt Method 7.2:Determination of maximum density of asphalt - Trichloroethane displacement method
  • AS 2001.5.3:1985 Methods of test for textiles - Dimensional change - Determination of relaxation in aqueous solution

Professional Standard - Commodity Inspection, Three methods for the determination of solubility

  • SN/T 0735.5-1997 Essential oils, perfumery isolates and synthetics for export.Determination of solubility in ethyl alcohol
  • SN/T 0837.1-1999 Method for the determination of purity of arsenic trioide for export

German Institute for Standardization, Three methods for the determination of solubility

  • DIN EN ISO 7579:2010-03 Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods (ISO 7579:2009); German version EN ISO 7579:2009
  • DIN EN ISO 7579:2010 Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods (ISO 7579:2009); German version EN ISO 7579:2009
  • DIN EN ISO 19340:2019-01 Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC) (ISO 19340:2017); German version EN ISO 19340:2017
  • DIN EN ISO 9455-11:2017-12 Soft soldering fluxes - Test methods - Part 11: Solubility of flux residues (ISO 9455-11:2017); German version EN ISO 9455-11:2017
  • DIN EN ISO 19340:2019 Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC) (ISO 19340:2017)
  • DIN EN 13999-3:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes; German version EN 13999-3:2007
  • DIN EN 13999-4:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates; German version EN 13999-4:2007
  • DIN EN ISO 11206:2013-05 Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR) (ISO 11206:2011); German version EN ISO 11206:2013
  • DIN EN ISO 9455-11:2017 Soft soldering fluxes - Test methods - Part 11: Solubility of flux residues (ISO 9455-11:2017)
  • DIN 10776-2:1998 Analysis of coffee and coffee products - Determination of pH and acid content - Method for soluble coffee
  • DIN EN 17181:2019-05 Lubricants - Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution - Test method based on CO<(Index)2>-production; German version EN 17181:2019
  • DIN 38405-52:2020 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 52: Photometric determination of dissolved chromium(VI) in water (D 52)
  • DIN 10776-2:2016 Analysis of coffee and coffee products - Determination of pH and acid content - Part 2: Method for soluble coffee
  • DIN EN 17181:2019 Lubricants - Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution - Test method based on CO-production
  • DIN 38405-52:2020-11 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 52: Photometric determination of dissolved chromium(VI) in water (D 52)
  • DIN CEN/TS 13649:2015-03*DIN SPEC 33969:2015-03 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption; German version CEN/TS 13649:2014
  • DIN EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography; German version EN 14662-2:2005
  • DIN EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography; German version EN 14662-5:2005
  • DIN 10764-2:2014 Analysis of coffee and coffee products - Determination of loss in mass of soluble coffee - Part 2: Method using vacuum oven (routine method)
  • DIN 38405-21:1990 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of dissolved silicate by spectrometry (D 21)
  • DIN 38405-26:1989 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of dissolved sulfide by spectrometry (D 26)

API - American Petroleum Institute, Three methods for the determination of solubility

  • API PAPER-906-14-I-1969 A SIMPLE@ ACCURATE@ FAST METHOD FOR CALCULATING CALCIUM SULFATE SOLUBILITY IN OIL FIELD BRINE

Canadian General Standards Board (CGSB), Three methods for the determination of solubility

NL-NEN, Three methods for the determination of solubility

  • NEN 6654-1992 Water - Photometric determination of the content of dissolved sulphate by continuous flowanalysis
  • NEN 6651-1992 Water - Photometric determination of the content of dissolved chloride by continuous flow analysis
  • NEN 6653-1992 Water - Photometric determination of the content of dissolved nitrite by continuous flow analysis
  • NEN 6652-1992 Water- Photometric determination of the sum of the contents of dissolved nitrate and nitrite by continuous flow analysis

BE-NBN, Three methods for the determination of solubility

  • NBN-EN 25814-1992
  • NBN T 96-201-1986 Workplace atmospheres - Determination of ethylene oxide concentration - Activated charcoal adsorption/solvent desorption/gas chromatographic method

AR-IRAM, Three methods for the determination of solubility

Professional Standard - Geology, Three methods for the determination of solubility

  • DZ/T 0064.9-1993 Determination of Total Dissolved Solids in Groundwater Quality Examination Methods
  • DZ/T 0064.9-2021 Methods of Analysis of Groundwater Quality Part 9: Gravimetric Method for Determination of Total Dissolved Solids

ES-UNE, Three methods for the determination of solubility

  • UNE-EN ISO 19340:2018 Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC) (ISO 19340:2017)
  • UNE-EN ISO 9455-11:2018 Soft soldering fluxes - Test methods - Part 11: Solubility of flux residues (ISO 9455-11:2017)
  • UNE-EN 17181:2019 Lubricants - Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution - Test method based on CO2-production
  • UNE-CEN/TS 13649:2014 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption (Endorsed by Asociación Española de Normalización in August...

SG-SPRING SG, Three methods for the determination of solubility

  • SS 11 Pt.4-1986 Methods Of Sampling And Test For Oils And Fats Part 4 : Determination Of Refractive Index
  • SS 11 Pt.8-1986 Methods Of Sampling And Test For Oils And Fats Part 8 : Determination Of Dissolved Soap (Alkalinity)

PL-PKN, Three methods for the determination of solubility

  • PN P50099-1962 Testing methods for paper indus?ry pro- duc?s. De?ermination of alpha cellulose in dissolving pulps
  • PN M77300 ArkusZ15-1974 Kinds and methods ot enamel-coating Determination ot the enamel density
  • PN M77300 ArkusZ16-1973 Kinds and methods of enamel-coating Determination of adherence ot enamel coating
  • PN M77300 ArkusZ23-1973 Kind and methods of enemel-coa?ing tests Determination of ?he grade of whiteness and colour
  • PN C82055-02-1991 Test methods of pressed carbon products Determination of flexural strength by three-point method
  • PN P50101-01-1992 Cellulose in dilute solutions Determination of limiting viscosity number Part 1: Method in cupri-ethylene-diamine (CED) solution
  • PN C04586-02-1990 Water and waste water Test for iron Determination of total and total dissolved iron by spectrophotometric method with bathophenanthroline Rang?: 0,002 H- 0,030 mg/l
  • PN M77300-08-1992 Household enamel utensils made from ironplate Kinds and methods of enamel coating Determination of resistance to hot detergent solutions
  • PN C89430-1993 Plastics. Guidelines for the standardization of methods for teh determination of viscosity number and limiting viscosity number of polymers in dilute solution. General conditions
  • PN P50101-02-1992 Cellulose in dilute solutions Determination of limiting viscosity number Part 2: Method in iron (III) sodium tartrate complex (EWNNmod NaC|) solution

Professional Standard - Aviation, Three methods for the determination of solubility

  • HB/Z 5109.3-2001 Analysis method for passivation solution Determination of chromium trioxide in zinc plating, cadmium plating triacid passivation solution through potentiometric titration
  • HB/Z 5091.1-1999 Analysis method for chrome plating solution Determination of chromium trioxide content through potentiometric titration
  • HB/Z 5092.1-2001 Electroplating Black Chromium Solution Analysis Method Potentiometric Titration Determination of Chromium Trioxide Content
  • HB/Z 5091.2-1999 Analysis method for chrome plating solution Determination of dichromium trioxide content through potentiometric titration
  • HB/Z 5109.9-2001 Analysis method for passivation solution Determination of chromium trioxide content in copper plating passivation solution through potentiometric titration
  • HB/Z 5109.4-2001 Analysis method for passivation solution Determination of sulphide acid in zinc plating, cadmium plating triacid passivation solution
  • HB/Z 5105.1-2000 Electrochemical Polishing Solution Analysis Method Potentiometric Titration Determination of Chromium Trioxide Content
  • HB/Z 5105.2-2000 Electrochemical Polishing Solution Analysis Method Potentiometric Titration Determination of Chromium Trioxide Content
  • HB/Z 5109.5-2001 Analysis method for passivation solution Determination of nitric acid in zinc plating, cadmium plating triacid passivation solution through potentiometric titration
  • HB/Z 339.1-1999 Analytical method of chromic acid anodic oxidation solution of aluminum alloy Determination of free chromium trioxide and total chromium trioxide content by potentiometric titration
  • HB/Z 5110.4-2000 Analytical method for electrochemical degreasing and chemical degreasing solution Determination of trisodium phosphate by EDTA volumetric method
  • HB/Z 5087.6-2004 Methods for analysis of acid plating copper solutions part 6:Determination of arsenic content by spectrophotometric method

Professional Standard - Hygiene , Three methods for the determination of solubility

  • WS/T 64-1996 Urine.Determination of trichloroacetic acid.Spectrophotometric method
  • WS/T 72-1996 Workplace air.Determination of propenol.Solvent desorption gas chromatographic method
  • WS/T 137-1999 Workplace air.Determination of chlorobenzene.Solvent desorption gas chromatographic method
  • WS/T 142-1999 Workplace air.Determination aniline.Solvent desorption gas chromatographic method
  • WS/T 143-1999 Workplace air.Determination of methanol.Solvent desorption gas chromatographic method
  • WS/T 164-1999 Workplace air.Determination of n-butylamine.Solvent desorption gas chromatographic method
  • WS/T 133-1999 Workplace air.Determination of fenthion.solvent desoption gas chromatographic method
  • WS/T 134-1999 Workplace air.Determination of biphenyl-phenyl ether.Solvent desorption gas chromatographic method
  • WS/T 158-1999 Workplace air.Determination of 1,4-butyrolactone.Solvent desorption gas chromatographic method
  • WS/T 170-1999 Workplace air.Determination of aniline.Solvent desorption high performance liquid chromatographic method
  • WS/T 157-1999 Workplace air.Determination of chlorobenzene.Charcoal diffusive sampler, solvent desorption and gas chromatographic method
  • WS/T 138-1999 Workplace air.Determination of 1,2-ethylene dichloride.Solvent desorption gas chromatographic method
  • WS/T 139-1999 Workplace air.Determination of methyl-iso-butyl ketone.Solvent desorption gas chromatographic method

GOSTR, Three methods for the determination of solubility

  • GOST 26176-2019 Fodders, mixed feeds. Methods for determination of soluble and hydrolysable carbohydrates

Professional Standard - Aerospace, Three methods for the determination of solubility

  • QJ 3140.8-2001 Analytical methods for 1,2,4-butanetriol-Part 8: Determination of the density of 1,2,4-butanetriol
  • QJ 3140.9-2001 Analytical methods for 1,2,4-butanetriol-Part 9: Determination of chromaticity of 1,2,4-butanetriol
  • QJ 3140.7-2001 Analytical methods for 1,2,4-butanetriol-Part 7: Determination of pH of 1,2,4-butanetriol
  • QJ 3140.1-2001 1,2,4-Butanetriol Analysis Method Part 1: Determination of 1,2,4-Butanetriol Purity and Impurity Butanetetrol Content

Professional Standard - Electron, Three methods for the determination of solubility

  • SJ/T 10226-1991 Potassium silicate solution for use in electronic industry-the methods of determination for density
  • SJ/T 10227-1991 Potassium silicate solution for use in electronic industry-the methods of determination for viscosity
  • SJ/T 10923-1996 Methods for determination of total alkalinity in potassium silicate solution for use in electronic industry
  • SJ/T 10923-1996 (2) Methods for determination of total alkalinity in potassium silicate solution for use in electronic industry

Japanese Industrial Standards Committee (JISC), Three methods for the determination of solubility

  • JIS K 7228:1987 Method for measuring smoke density and concentration of gases evolved by incineration or decomposition of plastics
  • JIS G 1257-15-2:2013 Iron and steel.Atomic absorption spectrometric method.Part 15: Determination of zinc.Section 2: Flame atomization after extraction of tetra-hexylammonium iodide-trioctylamine complex

ZA-SANS, Three methods for the determination of solubility

  • SANS 4044:2007 Methods for determination of fibre length by comb sorter diagram
  • SANS 5725-5:2009 Accuracy (trueness and precision) of measurement methods and results Part 5: Alternative methods for the determination of the precision of a standard measurement method
  • SANS 5725-4:2009 Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method
  • SANS 5725-2:2009 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

RO-ASRO, Three methods for the determination of solubility

  • SR 7184-3-2001 Soil - Determination of density. Pycnometer method using organic solvent
  • STAS 9484/5-1974 SILICA-ALUMINA MINING PRODUCTS Methods of physical and mechanical tests. Determination of swelling degree

工业和信息化部, Three methods for the determination of solubility

  • YS/T 739.2-2020 Methods of chemical analysis of aluminum electrolytes Part 2: Determination of molecular ratios Aluminum trichloride titration method

Group Standards of the People's Republic of China, Three methods for the determination of solubility

  • T/SDAA 0047-2021 Determination of illegal addition of 3 kinds of nitroimidazoles to amoxicillin soluble powder - High performance liquid chromatography

未注明发布机构, Three methods for the determination of solubility

  • BS EN ISO 14911:1999(2008) Water quality — Determination of dissolved Li +, Na +, NH4 +, K +, Mn2 +, Ca2 +, Mg2 +, Sr2 + and Ba2 + using ion chromatography — Method for water and waste water
  • BS 3730-3:1982(1999) Assessment of departures from roundness — Part 3 : Methods for determining departures from roundness using two - and three - point measurement

Professional Standard - Non-ferrous Metal, Three methods for the determination of solubility

  • YS/T 239.4-2010 Methods for chemical analysis of antimony trisulfide- Part 4:Determination of aqua-regia insolubles content-Gravimetric method
  • YS/T 63.14-2006 Carbonaceous materials used in the production of aluminium-Part 14:Determination of bending/shear strength by a three-point method
  • YS/T 63.14-2023 Carbonaceous materials used for the production of aluminium — Part 14:Determination of bending/shears strength — Three point method
  • YS/T 240.4-2007 Methods for chemical analysis of bismuth concentrate. Determination of tungsten trioxide content. Thiocyanate spectrophotometric method
  • YS/T 535.5-2009 Chemical analysis methods of sodium fluoride.Part 5:Determination of soluble sulphates content.Turbidimetric method

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Three methods for the determination of solubility

  • JEDEC JESD22-A120-2001 Test Method for the Measurement of Moisture Diffusivity and Water Solubility in Organic Materials Used in Integrated Circuits
  • JEDEC JESD22-A120B-2014 Test Method for the Measurement of Moisture Diffusivity and Water Solubility in Organic Materials Used in Electronic Devices

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Three methods for the determination of solubility

  • GB/T 33584.5-2017 Seawater quality requirements and analysis methods for seawater cooling system—Part 5: Determination of dissolved solid

Indonesia Standards, Three methods for the determination of solubility

  • SNI 06-6989.35-2005 Water and waste water - Part 35: Test methods of dissolved aluminium (Al) content by spectrophotometers with eriochrome cyanine R

Professional Standard - Chemical Industry, Three methods for the determination of solubility

  • HG/T 3050.3-2001 Rubber-or plastics-coated fabrics - Determination of roll characteristics - Part 3:Method for determination of thickness

BR-ABNT, Three methods for the determination of solubility

  • ABNT NBR 14320-2003 Paper, board and pulp - Determination of water soluble chlorides - Method for high purity products

IT-UNI, Three methods for the determination of solubility

National Metrological Verification Regulations of the People's Republic of China, Three methods for the determination of solubility

  • JJG(核工) 7-1991 Test method for specific activity of radioactive solution with 4Πβ-γ conforming standard device

Military Standard of the People's Republic of China-General Armament Department, Three methods for the determination of solubility

  • GJB 533.16-1988 Detection method for 45 components of submarine cabin air Colorimetric method for determination of alkaline aerosol (sodium hydroxide) content
  • GJB 533.20-1988 Methods for detection of 45 components of submarine cabin air. Determination of hydrazine content. Phosphomolybdic acid absorbance method.

CEN - European Committee for Standardization, Three methods for the determination of solubility

  • EN 17181:2019 Lubricants - Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution - Test method based on CO2-production
  • PREN 17181-2017 Lubricants - Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution - Test method based on CO2-production

中华人民共和国国家卫生和计划生育委员会, Three methods for the determination of solubility

  • WS/T 66-1996 Blood.Determination of cholinesterase activity.Spectrophotometric method--Hydroxylamine-ferric chloride method

Professional Standard - Rare Earth, Three methods for the determination of solubility

  • XB/T 601.5-2008 Chemical analysis methods of lanthanum boride.Determination of acid dissolving silicon content.Silicon molybdenum blue spectral luminosity method

Society of Automotive Engineers (SAE), Three methods for the determination of solubility

  • SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test

VE-FONDONORMA, Three methods for the determination of solubility

(U.S.) Ford Automotive Standards, Three methods for the determination of solubility

  • FORD FLTM BO 021-3-2001 METHOD FOR DETERMINING FLOW UNDER LOAD OF VARIOUS PLASTIC MATERIALS AT MODERATE TEMPERATURES

Professional Standard - Agriculture, Three methods for the determination of solubility

  • GB 8857-1988 Method for determination of total ash and alkalinity of total ash and water-soluble ash in fruit and vegetable products

Canadian Standards Association (CSA), Three methods for the determination of solubility

  • CSA Z217.1/Z217.2-M92-1992 Standard Practice for Dilute-Solution Viscosity of Photodegradable Polystyrene/Test Method for Tumbling Friability of Degradable Polystyrene Foams First Edition; General Instruction No 1 R(1999)




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved