ZH
RU
ES
Pengcheng laboratory report
Pengcheng laboratory report, Total:99 items.
In the international standard classification, Pengcheng laboratory report involves: Applications of information technology, Quality, Environmental protection, Test conditions and procedures in general, Laboratory medicine, Protection against fire, Linear and angular measurements, Mechanical testing, Biology. Botany. Zoology, Cereals, pulses and derived products, Medical sciences and health care facilities in general, Electrical and electronic testing, Equipment for the chemical industry, Occupational safety. Industrial hygiene, Analytical chemistry, Road vehicle systems, Corrosion of metals, Diagnostic, maintenance and test equipment, Tyres, Sterilization and disinfection, Electricity. Magnetism. Electrical and magnetic measurements, Products of the textile industry.
Korean Agency for Technology and Standards (KATS), Pengcheng laboratory report
AENOR, Pengcheng laboratory report
- UNE 129001:1997 CLINICAL LABORATORY REPORTS. PREPARING REQUIREMENTS.
- UNE-CR 12739:2000 BIOTECHNOLOGY. LABORATOIRES FOR RESEARCH, DEVELOPMENT AND ANALYSIS. REPORT ON THE SELECTION OF EQUIPMENT NEEDED FOR BIOTECHNOLOGY LABORATORIES ACCORDING TO THE DEGREE OF HAZARD
- UNE-CEN/TR 16324:2013 IN Technical report of the interlaboratory study for the determination of Besatz in common wheat, rye and durum wheat
- UNE-IEC/TR 61010-3:2006 IN Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3: Protocol for the preparation of conformity verification reports for the IEC 61010 2nd edition series .
- UNE-IEC/TR 61010-3-1:2006 IN Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-1: Conformity verification report for IEC 61010-1:2001 - General requirements (IEC/TR 61010-3-1:2003)
US-FCR, Pengcheng laboratory report
API - American Petroleum Institute, Pengcheng laboratory report
- API PUBL 4694-1999 Laboratory Analysis of Petroleum Industry Wastewaters Arranging for Analysis and Understanding Laboratory Reports
- API DR169-1984 Final Report Interlaboratory Testing: Acute Toxicity Bioassay Method for Chemically-Dispersed Oils
European Committee for Standardization (CEN), Pengcheng laboratory report
- CEN/TR 14922:2004 Portable fire extinguishers - Model laboratory - Report in compliance with EN 3-7
- PD CEN/TR 14922:2004 Portable fire extinguishers - Model laboratory - Report in compliance with EN 3-7
- PD CEN/TR 16324:2012 Technical report of the interlaboratory study for the determination of Besatz in common wheat@ rye and durum wheat
- PD CEN/TR 16875:2015 Cereal and cereal products - Technical report of the interlaboratory study for the determination of impurities content in maize (Zea mays, L.) and sorghum (Sorghum bicolor, L.)
- CEN/TR 17474:2020 Cereals (wheat and barley) - Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy
- CEN/TR 16875:2015 Cereal and cereal products - Technical report of the interlaboratory study for the determination of impurities content in maize (Zea mays, L.) and sorghum (Sorghum bicolor, L.)
- PD CEN/TR 17474:2020 Cereals (wheat and barley) - Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy
RU-GOST R, Pengcheng laboratory report
- GOST 31900-2012 Principles of Good Laboratory Practice (GLP). Guidance for the preparation of GLP inspection reports
American Society for Testing and Materials (ASTM), Pengcheng laboratory report
- ASTM E1246-88(1995) Standard Practice for Reporting Reliability of Clinical Laboratory Computer Systems
- ASTM E1246-01 Standard Practice for Reporting Reliability of Clinical Laboratory Computer Systems
- ASTM F3539-22 Standard Practice for Creation of Walkway Tribometer Interlaboratory Study Reports and Test Procedures
- ASTM G117-98 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests
- ASTM G117-02(2007) Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests
- ASTM G117-02 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests
- ASTM G117-13 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests
- ASTM E2093-00 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
- ASTM E2093-05 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
- ASTM D6689-01(2011) Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
- ASTM D6689-01(2019)e1 Standard Guide for Optimizing, Controlling, and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
Danish Standards Foundation, Pengcheng laboratory report
- DS/CEN/TR 14922:2005 Portable fire extinguishers - Model laboratory - Report in compliance with EN 3-7
- DS/CEN/CR 12739:1999 Biotechnology - Laboratories for research, development and analysis - Report on the selection of equipment needed for biotechnology laboratories according to the degree of hazard
- DS/CEN/TR 16324:2012 Technical report of the interlaboratory study for the determination of Besatz in common wheat, rye and durum wheat
- DS/IEC/TR 61010-3-020:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-020: Conformity verification report for IEC 61010-2-020:1992, Particular requirements for laboratory centrifuges
- DS/IEC/TR 61010-3-010:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-010: Conformity verification report for IEC 61010-2-010, Particular requirements for laboratory equipment for the heating of materials
- DS/IEC/TR 61010-3-051:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-051: Conformity verification report for IEC 61010-2-051, Particular requirements for laboratory equipment for mixing and stirring
- DS/CEN/TR 17474:2020 Cereals (wheat and barley) – Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy
- DS/IEC/TR 61010-3-061:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-061: Conformity verification report for IEC 61010-2-061, Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
- DS/IEC/TR 61010-3:2004 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3: Protocol for the preparation of conformity verification reports for the IEC 61010 2nd edition series
Association Francaise de Normalisation, Pengcheng laboratory report
- FD S61-924*FD CEN/TR 14922:2005 Portable fire extinguisher - Model laboratory - Report in compliance with EN 3-7
- FD X42-205*FD CR 12739:1999 Biotechnology. Laboratories for research, development and analysis. Report on the selection of equipment needed for biotechnology laboratories according to the degree of hazard.
- FD CR 12739:1999 Biotechnologie - Laboratoires de recherche, développement et analyse - Rapport sur le choix des équipements nécessaires dans les laboratoires de biotechnologie en fonction du degré de danger.
- FD V03-756*FD CEN/TR 16324:2012 Technical Report of the interlaboratory study for the determination of Besatz in common wheat, rye and durum wheat
- FD CEN/TR 16324:2012 Rapport technique relatif à l'essai interlaboratoires portant sur la détermination du pourcentage d'impuretés dans le blé tendre, le seigle et le blé dur
- FD V03-769*FD CEN/TR 17474:2021 Cereals (wheat and barley) - Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy
- FD V30-750*FD CEN/TR 16875:2015 Cereal and cereal products - Technical report of the interlaboratory study for the determination of impurities content in maize (Zea mays, L.) and sorghum (Sorghum bicolor, L.)
- FD CEN/TR 16875:2015 Céréales et produits céréaliers - Rapport technique de l'étude interlaboratoires pour la détermination de la teneur en impuretés dans le maïs (Zea mays, L.) et le sorgho (Sorghum bicolor, L.)
- FD CEN/TR 17474:2021 Céréales (blé et orge) - Rapport technique des essais interlaboratoires pour la détermination de la teneur en eau et en protéines par spectroscopie proche infrarouge sur des grains entiers
Professional Standard - Commodity Inspection, Pengcheng laboratory report
- SN/T 2723.3-2010 Laboratory proficiency testing.Part 3: Format and content of proficiency testing report
National Association of Corrosion Engineers (NACE), Pengcheng laboratory report
- NACE 5A195-1995 State-of-the-Art Report on Controlled-Flow Laboratory Corrosion Tests (Item No. 24187)
Society of Automotive Engineers (SAE), Pengcheng laboratory report
- SAE AIR5747-2008 EMC Laboratory RF Radiated Emission Report for Passive Radio Frequency Identification (RFID) Tags
- SAE AIR5747A-2020 EMC Laboratory RF Radiated Emission Report for Passive Radio Frequency Identification (RFID) Tags
- SAE J1563-1993 (R) Guidelines for Laboratory Cyclic Corrosion Test Procedures for Painted Automotive Parts, Information Report October 1993
- SAE J1107-1975 Laboratory Testing Machines for Measuring the Steady State Force and Moment Properties of Passenger Car Tires, Information Report January 1975
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Pengcheng laboratory report
- IEEE 548-1984 Standard Criteria and Guidelines for the Laboratory Measurement and Reporting of Fly Ash Resistivity
Institute of Electrical and Electronics Engineers (IEEE), Pengcheng laboratory report
- IEEE Std 548-1984 IEEE Standard Criteria and Guidelines for the Laboratory Measurement and Reporting of Fly Ash Resistivity
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Pengcheng laboratory report
- GB/T 22274.3-2008 Good Laboratory Practice Guidelines for Supervising Authorities Part 3: Guidelines for the Preparation of Good Laboratory Practice Inspection Reports
- GB/Z 30993-2014 Safety requirements for electrical equipment for measurement, control and laboratory use.Conformity verification report for GB 4793.1—2007
- GB/Z 30249-2013 Safety requirements for electrical equipment for measurement,control, and laboratory use.Protocol for the preparation of conformity verfication reports for the GB 4793 series
US-CFR-file, Pengcheng laboratory report
- CFR 42-493.1291-2014 Public Health. Part493:Laboratory requirements. Section493.1291:Standard: Test report.
未注明发布机构, Pengcheng laboratory report
- SAE AIR5747-2020 EMC Laboratory RF Radiated Emission Report for Passive Radio Frequency Identification (RFID) Tags
- BS IEC 61010-3:1997(2000) Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 3 : Protocol for the preparation of conformity verification reports for the IEC 61010 series
IPC - Association Connecting Electronics Industries, Pengcheng laboratory report
- IPC 1753-2013 Laboratory Report Standard (Incorporates Amendment A1: April 2018; Includes Access to Additional Content)
American National Standards Institute （ANSI), Pengcheng laboratory report
- ANSI/HL7 V3 PORT, R 1-2004 HL7 Version 3 Standard: Regulated Studies - Periodic Reporting of Clinical Trials Laboratory Results, , Release 1
German Institute for Standardization, Pengcheng laboratory report
- DIN CEN/TR 16324:2012-11*DIN SPEC 10624:2012-11 Technical report of the interlaboratory study for the determination of Besatz in common wheat, rye and durum wheat; German version CEN/TR 16324:2012
- DIN CEN/TR 16324:2012 Technical report of the interlaboratory study for the determination of Besatz in common wheat, rye and durum wheat; German version CEN/TR 16324:2012
British Standards Institution (BSI), Pengcheng laboratory report
- BS IEC 61010-3-020:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-020:1992, particular requirements for laboratory centrifuges
- BS IEC 61010-3-051:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-051, particular requirements for laboratory equipment for mixing and stirring
- PD IEC TR 61010-3-041:2002 Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-041:1995. Particular requirements for autoclaves using steam for the treatment of medical materials, and for laborato
- BS IEC 61010-3-010:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-010, particular requirements for laboratory equipment for the heating of materials
- BS IEC 61010-3:1997 Safety requirements for electrical equipment for measurement, control, and laboratory use - Protocol for the preparation of conformity verification reports for the IEC 61010 series
- PD 6537-1-1993 Variability of methods of test for textiles and reports of interlaboratory trials on certain methods. Phase 1: BS 2576, BS 4303 and ISO 9290
- PD 6537-1:1993 Variability of methods of test for textiles and reports of interlaboratory trials on certain methods. Phase 1: BS 2576, BS 4303 and ISO 9290
- BS IEC 61010-3-061:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-061, particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
- PD 6537-2:1994 Variability of methods of test for textiles and reports of inter-laboratory trials on certain methods.. Phase 2. BS 3320, BS 2010 and BS 1932
- BS PD CEN/TR 16875:2015 Cereal and cereal products. Technical report of the interlaboratory study for the determination of impurities content in maize (Zea mays, L.) and sorghum (Sorghum bicolor, L.)
- BS PD CEN/TR 17474:2020 Cereals (wheat and barley). Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy
- PD IEC TR 61010-3-043:2002 Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-043:1997. Particular requirements for dry heat sterilizers using either hot air or hot inert gas for treatment of med
International Electrotechnical Commission (IEC), Pengcheng laboratory report
- IEC TR 61010-3-020:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-020: Conformity verification report for IEC 61010-2-020:1992 - Particular requirements for laboratory centrifuges
- IEC TR3 61010-3-1:1997 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-1: Conformity verification report for IEC 61010-1
- IEC TR3 61010-3-010:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-010: Conformity verification report for IEC 61010-2-010, particular requirements for laboratory equipment for the heating of materials
- IEC TR 61010-3-101:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-101: Conformity verification report for IEC 61010-2-101:2002; Particular requirements for in vitro diagnostic (IVD) medical equipment
- IEC TR 61010-3-041:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-041: Conformity verification report for IEC 61010-2-041:1995 - Particular requirements for autoclaves using steam for the treatment of medical materials, an
- IEC TR3 61010-3-051:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-051: Conformity verification report for IEC 61010-2-051, particular requirements for laboratory equipment for mixing and stirring
- IEC TR3 61010-3:1997 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3: Protocol for the preparation of conformity verification reports for the IEC 61010 series
- IEC TR 61010-3-045:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-045: Conformity verification report for IEC 61010-2-045:2000; Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary an
- IEC TR 61010-3-1:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-1: Conformity verification report for IEC 61010-1:2001; General requirements
- IEC TR 61010-3-081:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-081: Conformity verification report for IEC 61010-2-081:2001; Particular requirements for automatic and semi-automatic laboratory equipment for analysis and
- IEC TR3 61010-3-061:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-061: Conformity verification report for IEC 61010-2-061, particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
- IEC TR 61010-3-042:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-042: Conformity verification report for IEC 61010-2-042:1997 - Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of m
- IEC TR 61010-3-043:2001 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-043: Conformity verification report for IEC 61010-2-043:1997; Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the
SAE - SAE International, Pengcheng laboratory report
- SAE J1563-1987 Guidelines and Limitations of Laboratory Cyclic Corrosion Test Procedures for Exterior@ Painted@ Automotive Body Panels
- SAE J1563-2016 Guidelines for Laboratory Cyclic Corrosion Test Procedures for Painted Automotive Parts
IEC - International Electrotechnical Commission, Pengcheng laboratory report
- IEC TR 61010-3-010:1999 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use - Part 3-010: Conformity Verification Report for IEC 61010-2-010@ Particular Requirements for Laboratory Equipment for the Heating of Materials (Edition 1.0)
- IEC TR 61010-3-051:1999 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use - Part 3-051: Conformity Verification Report for IEC 61010-2-051@ Particular Requirements for Laboratory Equipment for Mixing and Stirring (Edition 1.0)
- IEC TR 61010-3-1:1997 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use - Part 3-1: Conformity Verification Report for IEC 61010-1 (Edition 1.0)
- IEC TR 61010-3-061:1999 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use - Part 3-061: Conformity Verification Report for IEC 61010-2-061@ Particular Requirements for Laboratory Atomic Spectrometers with Thermal Atomization and Ionization