ZH
RU
ES

Board-to-Board Connector Specifications

Board-to-Board Connector Specifications, Total:490 items.

In the international standard classification, Board-to-Board Connector Specifications involves: Electromechanical components for electronic and telecommunications equipment, Printed circuits and boards, Electrical accessories, Fibre optic communications, Aerospace electric equipment and systems, Components and accessories for telecommunications equipment, Structures of buildings, Iron and steel products, Pipeline components and pipelines, Welding, brazing and soldering, Fasteners for aerospace construction, Paper and board, Paper products, Office machines, Installations in buildings, Construction industry, Fruits. Vegetables, Interface and interconnection equipment.

European Committee for Electrotechnical Standardization（CENELEC）, Board-to-Board Connector Specifications

EN 60603-9:1998 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 9: Two-Part Connectors for Printed Boards, Backpanels and Cable Connectors, Basic Grid of 2,54 mm (0,1 in)
EN 60603-10:1998 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 10: Two-Part Connectors for Printed Boards for Basic Grid of 2,54 mm (0,1 in), Inverted Type
EN 61076-4-111:2002 Connectors for Electronic Equipment Part 4-111: Printed Board Connectors with Assessed Quality - Detail Specification for Two-Part Power Connector Modules, for Printed Boards and Backplanes Having Early Mating Features, and Having a Basic Grid of 2,5 mm i
EN 61076-4-101:2001 Connectors for Electronic Equipment Part 4-101: Printed Board Connectors with Assessed Quality - Detail Specification for Two-Part Connector Modules, Having a Basic Grid of 2,0 mm for Printed Boards and Backplanes in Accordance with IEC 60917
EN 60603-13:1998 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 13: Detail Specification for Two-Part Connectors of Assessed Quality, for Printed Boards for Basic Grid of 2,54 mm (0,1 in) with Free Connectors for Non-Accessible Insulation Displace
EN 61076-4-100:2001 Connectors for Electronic Equipment - Part 4-100: Printed Board Connectors with Assessed Quality - Detail Specification for Two-Part Connector Modules Having a Grid of 2,5 mm for Printed Boards and Backplanes
EN 61076-4-113:2003 Connectors for electronic equipment - Printed board connectors Part 4-113: Detail specification for two-part connectors having 5 rows with grid of 2,54 mm for printed boards and backplans in bus applications
EN 60603-5:1998 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 5: Edge-Socket Connectors and Two-Part Connectors for Double-Sided Printed Boards with 2,54 mm (0,1 in) Spacing
EN 175100:1992 Sectional Specification: Two Part and Edge Socket Connectors for Printed Board Application
EN 61076-4-114:2003 Connectors for electronic equipment Part 4-114: Printed board connectors Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm
EN 175101-802:1999 Detail Specification: Two-Part Connectors for Printed Boards for High Number of Contracts with Basic Grid of 2,54 mm on 3 or 4 Rows
EN 61076-4-104:1999 Connectors for Use in d.c. Low-Frequency Analogue and Digital High-Speed Data Applications - Part 4-104: Printed Board Connectors with Assessed Quality - Detail Specification for Two-Part Modular Connectors, Basic Grid of 2,0 mm, with Terminations on a Mu
EN 61076-4-108:2002 Connectors for electronic equipment Part 4-108: Printed board connectors with assessed quality Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density
EN 61076-4-110:2002 Connectors for Electronic Equipment - Part 4-110: Printed Board Connectors with Assessed Quality - Detail Specification for Latched Cable Connector System Having a Basic Grid of 2,0 mm Including Full Shielding and Latching Function
EN IEC 62496-4-214:2020 Optical circuit boards - Part 4-214: Interface standards - Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector
EN 60603-8:1998 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 8: Two-Part Connectors for Printed Boards, for Basic Grid of 2,54 mm (0,1 in), with Square Male Contacts of 0,63 mm X 0,63 mm
EN 61076-4-107:2001 Connectors for Electronic Equipment - Part 4-107: Printed Board Connectors with Assessed Quality - Detail Specification for Shielded Two-Part Connectors Having a Basic Grid of 2,0 mm, Fixed Part with Solder and Press-in Terminations for Printed Boards, Fr
EN 62326-4-1:1997 Printed Boards; Part 4: Rigid Multilayer Printed Boards with Interlayer Connections Sectional Specification; Section 1: Capability Detail Specification Performance Levels A, B and C
EN 61076-4-103:1999 Connectors for Use in d.c. Low-Frequency Analogue and Digital High Speed Data Applications Part 4-103: Printed Board Connectors with Assesed Quality - Detail Specification for Two-Part Connectors with Shielding and a Basic Grid of 2,5 mm
EN 61076-4:1996 Connectors with Assessed Quality, for Use in d.c., Low Frequency Analogue and in Digital High-Speed Data Applications - Part 4: Sectional Specification Printed Board Connectors
EN 61169-29:2005 Radio-frequency connectors Part 29: Sectional specification Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications) Characteristic impedance 50 ohms (type 1,0/2,3) 50 ohms an
EN 175101-809:2004 Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality
EN 60603-14:1999 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 14: Detail Specification for Circular Connectors for Low-Frequency Audio and Video Applications Such as Audio, Video and Audio-Visual Equipment
EN 61076-4-105:1998 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide

German Institute for Standardization, Board-to-Board Connector Specifications

DIN EN 61076-4-113:2003 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications (IEC 61076-4-113:2002); German version EN
DIN 41650-1:1986 Sectional specification for connectors; connectors for printed boards
DIN EN 61076-4-101 Berichtigung 1:2010-10 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 - (IEC ...
DIN EN 61076-4-113:2003-08 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications (IEC 61076-4-113:2002); German version ...
DIN 41617-2:1989-09 Two-part connectors for printed boards, grid 2,5 mm; gauges, ratings, requirements, tests
DIN EN 60603-9:1998-07 Connectors for frequencies below 3 MHz for use with printed boards - Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) (IEC 60603-9:1990); German version EN 60603-9:1998
DIN EN 61076-4-100:2002 Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality; Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes (IEC 61076-4-100:2001); German version EN 61076
DIN 41650-11:1981 Sectional specification for connectors; connectors for printed boards; presentation of detail specifications
DIN EN 61076-4-114:2004 Connectors for electronic equipment - Part 4-114: Printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm × 1,5 mm (IEC 61076-4-114:2003); German version EN 61076-4-114:2003
DIN EN 61076-4-114:2004-01 Connectors for electronic equipment - Part 4-114: Printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm × 1,5 mm (IEC 61076-4-114:2003); German version EN 61076-4-114:2003
DIN EN 61076-4-108:2002-12 Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality; Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing den...
DIN EN 60603-13:1998-09 Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation di...
DIN EN 60603-13 Berichtigung 1:2013-09 Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation di...
DIN IEC/TS 62661-2-1:2011 Optical backplanes - Product specification - Part 2-1: Optical backplane using optical fibre circuit boards and multi-core right angle optical connectors (IEC 86/375/CD:2010)
DIN EN 61076-4-101:2002 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality; Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 (IEC 61076-
DIN IEC 60603-11:1995 Connectors for frequencies below 3 MHz for use with printed boards - Part 11: Detail specification for concentric connectors (dimensions for free connectors and fixed connectors) (IEC 60603-11:1992)
DIN EN 60603-2:2006-04 Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features (IEC 60603-2:1995 + A1...
DIN EN 61076-4-111:2002-12 Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality; Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 ...
DIN EN 175101-802:2000-09 Detail specification - Two-part-connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows; German version EN 175101-802:1999
DIN EN 61076-4-111:2002 Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality; Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm
DIN EN 60603-10:1998-07 Connectors for frequencies below 3 MHz for use with printed boards - Part 10: Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type (IEC 60603-10:1991); German version EN 60603-10:1998
DIN EN 61076-4-104:1999 Connectors for use in d.c. low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality; detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a mul
DIN EN 60603-2:2006 Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features (IEC 60603-2:1995 + A1:20
DIN 41617-2:1989 Two-part connectors for printed boards, grid 2,5 mm; gauges, ratings, requirements, tests
DIN EN 175101-802:2000 Detail specification - Two-part-connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows; German version EN 175101-802:1999
DIN EN 60603-13:1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displ
DIN EN 4640-001:2009-09 Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 001: Technical specification; German and English version EN 4640-001:2009
DIN EN ISO 15614-8:2016 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016); German version EN ISO 15614-8:2016
DIN EN ISO 15614-8:2002 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002); German version EN ISO 15614-8:2002
DIN EN 175101-809:2004 Detail specification - Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75101-801, with assessed quality; German version EN 175101-809:2004
DIN EN IEC 62496-4-214:2021-11 Optical circuit boards - Part 4-214: Interface standards - Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector (IEC 62496-4-214:2020); German version EN IEC 62496-4-214:2020
DIN EN 175101-809:2004-11 Detail specification - Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75101-801, with assessed quality; German version EN 175101-809:2004 / Note: DIN EN 175101-809 (2000-09) remains valid alongsid...
DIN EN 60603-8:1998-07 Connectors for frequencies below 3 MHz for use with printed boards - Part 8: Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm × 0,63 mm (IEC 60603-8:1990); German version EN 60603-8:1998
DIN EN 61076-4-101 Berichtigung 1:2010 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 - (IEC 610
DIN EN 60320-3/A1:2017 Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges (IEC 23G/384/CD:2017)
DIN EN 175101-809 Berichtigung 1:2008-11 Detail specification - Two-part connectors for printed boards having a grid of 2, 54 mm, short version in compliance with CECC 75101-801, with assessed quality; German version EN 175101-809:2004, Corrigendum to DIN EN 175101-809:2004-11; German version...
DIN EN 4640-004:2009-07 Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 004: Receptacle optical connector - Product standard; German and English version EN 4640-004:2008
DIN EN 4640-003:2009-07 Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 003: Plug optical connector - Product standard; German and English version EN 4640-003:2008
DIN 41617-1:1989-09 Two-part connectors for printed boards, grid 2,5 mm; common mounting features, survey of typs; dimensions of type L, M, N and S
DIN EN 61076-4-108:2002 Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality; Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing densit
DIN EN 62326-4-1:1997-08 Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections; sectional specification; section 1: Capability detail specification; performance levels A, B and C (IEC 62326-4-1:1996); German version EN 62326-4-1:1997
DIN EN 61076-4-116:2012 Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function (IEC 61076-4-116:2012); German version EN 61076-4-116:2012
DIN EN 61076-4-103:1999 Connectors for use in d.c. low frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality; detail specification for two-part connectors with shielding and a basic grid of 2,5 mm (IEC 61076-4-10
DIN EN 61076-4-102:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors; Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in u
DIN EN 175101-809 Berichtigung 1:2008 Detail specification - Two-part connectors for printed boards having a grid of 2, 54 mm, short version in compliance with CECC 75101-801, with assessed quality; German version EN 175101-809:2004, Corrigendum to DIN EN 175101-809:2004-11; German version CE
DIN EN 61076-4-107:2002 Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality; Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, fre
DIN EN 61076-4-102:1997-10 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors; Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-i...
DIN 41617-1:1989 Two-part connectors for printed boards, grid 2,5 mm; common mounting features, survey of typs; dimensions of type L, M, N and S
DIN EN 60603-14:1999 Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment (IEC 60603-14:1998); German version E
DIN EN IEC 62496-4-214:2021 Optical circuit boards - Part 4-214: Interface standards - Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector (IEC 62496-4-214:2020); German version EN IEC 62496-4-214:2020
DIN EN 60603-13 Berichtigung 1:2013 Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displ
DIN EN 61076-4-001:1997-04 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 4: Printed board connectors; section 001: Blank detail specification (IEC 61076-4-001:1996); German version EN 61076-4-001:1996
DIN EN 60603-14:1999-11 Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment (IEC 60603-14:1998); German versio...

Society of Automotive Engineers (SAE), Board-to-Board Connector Specifications

SAE ARINC404B-2-2015 SPECIFICATION CONNECTORS, RACK AND PANEL, RECTANGULA REAR RELEASE CRIMP CONTACTS
SAE AIR6151B-2014 Torque, Threaded Application, Electrical Connector, Accessory and Terminal Board Installation
SAE J1453/3-2009 Specification for O-Ring Face Seal Connectors: Part 3 Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Connectors, Caps, and Connectors with SAE J 1926-2 Inch Stud Ends
SAE J1453/3-2012 Specification for O-Ring Face Seal Connectors: Part 3 Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Caps, and Connectors with SAE J 1926-2 Inch Stud Ends
SAE J1453/2-2007 Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Caps, and Connectors with ISO 6149-2 Metric Stud Ends
SAE J1453/2-2013 Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Braze-on Tube Ends, Caps, and Connectors with ISO 6149-2 Metric Stud Ends and ISO 6162 4-Bolt Flange Heads.

Association Francaise de Normalisation, Board-to-Board Connector Specifications

NF C93-123-500*NF EN 123500:2014 Sectional specification : flexible printed boards with through connections
NF C93-406-4-113*NF EN 61076-4-113:2005 Connectors for electronic equipment - Printed board connectors - Part 4-113 : detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications.
NF C93-123-400*NF EN 123400:2014 Sectional specification : flexible printed boards without through connections
NF C93-123-800*NF EN 123800:2014 Sectional specification : flexible multilayer printed boards with through connections
NF EN 60603-9:1998 Connecteurs pour fréquences inférieures à 3 MHz pour utilisation avec cartes imprimées - Partie 9 : connecteurs pour cartes imprimées enfichables, connexions fond de panier et connecteurs de câble, pour grille de base de 2,54 mm (0,1 in).
NF EN 61076-4-100:2002 Connecteurs pour équipements électroniques - Partie 4-100 : connecteurs pour cartes imprimées - Spécification particulière pour les modules de connecteurs en deux parties pour cartes imprimées et fonds de panier, au pas de 2,5 mm
NF EN 123400/A2:2014 Spécification intermédiaire : cartes imprimées souples sans connexions transversales
NF EN 123400:2014 Spécification intermédiaire : cartes imprimées souples sans connexions transversales
NF C93-406-4-100*NF EN 61076-4-100:2002 Connectors for electronic equipment - Part 4-100 : printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes.
NF EN 123500/A2:2014 Spécification intermédiaire : cartes imprimées souples avec connexions transversales
NF EN 123500:2014 Spécification intermédiaire : cartes imprimées souples avec connexions transversales
NF C93-406-4-101*NF EN 61076-4-101:2002 Connectors for electronic equipment - Part 4-101 : printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and blackplanes in accordance with IEC 60917
NF C93-406-4-111*NF EN 61076-4-111:2004 Connectors for electronic equipment - Part 4-111 : printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 m
NF C93-406-4-114*NF EN 61076-4-114:2005 Connectors for electronic equipment - Part 4-114 : printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm
NF EN 61076-4-111:2004 Connecteurs pour équipements électroniques - Partie 4-111 : connecteurs pour cartes imprimées sous assurance de la qualité - Spécification particulière pour modules de connecteur de puissance à deux parties, pour cartes imprimées et panneaux ar...
NF EN 61076-4-113:2005 Connecteurs pour équipements électroniques - Connecteurs pour cartes imprimées - Partie 4-113 : spécification particulière pour connecteurs en deux parties ayant 5 rangées au pas de 2,54 mm pour cartes imprimées enfichables en fond de panier, da...
NF EN 61076-4-110:2002 Connecteurs pour équipements électroniques - Partie 4-110 : connecteurs pour cartes imprimées sous assurance de la qualité - Spécification particulière pour connecteur de câble pour carte et fond de panier, pas de base 2 mm incluant un blindage ...
NF EN 61169-38:2015 Connecteurs pour fréquences radioélectriques - Partie 38 : spécification intermédiaire - Connecteurs coaxiaux pour fréquences radioélectriques, de type glissant (applications en panneau et fond de panier) - Impédance caractéristique 50 ohms (ty...
NF EN 60603-2/A1:2005 Connecteurs pour fréquences inférieures à 3 MHz pour utilisation avec cartes imprimées - Partie 2 : spécification particulière pour connecteurs en deux parties pour cartes imprimées, avec assurance de la qualité, pour grilles de base de 2,54 mm...
NF EN 61076-4-101:2002 Connecteurs pour équipements électroniques - Partie 4-101 : Connecteurs pour cartes imprimées sous assurance de la qualité - Spécification particulière pour modules de connecteurs en deux parties au pas de base de 2,0 mm, pour cartes imprimées e...
NF EN 61076-4-102:1998 Connecteurs sous assurance de la qualité, pour uti - Partie 4 : connecteurs pour cartes imprimées - Section 102 : spécification particulière pour connecteurs monobroches en deux parties, à usage multiple sur cartes imprimées, aux possibilités de...
NF C93-430-8*NF EN 60603-8:1998 Connectors for frequencies below 3 MHz for use with printed boards. . Part 8 : two-parts connectors for printed boards, for basic grid of 2,54 mm (0,1 in) with square male contacts of 0,63 mm X 0,63 mm.
NF C93-430-2/A1*NF EN 60603-2/A1:2005 Connectors for frequencies below 3 MHz for use with printed boards - Part 2 : detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features.
NF C93-430-2*NF EN 60603-2:1999 Connectors for frequencies below 3 MHz for use with printed boards. Part 2 : detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0.1 in) with common mounting features.
NF C83-401-809*NF EN 175101-809:2004 Detail specification : two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality
NF C93-406-4-108*NF EN 61076-4-108:2004 Connectors for electronic equipment - Part 4-108 : printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing dens
NF EN 60603-13:1998 Connecteurs pour fréquences inférieures à 3 MHz pour utilisation avec cartes imprimées - Partie 13 : spécification particulière pour les connecteurs en deux parties, sous assurance de la qualité pour cartes imprimées pour grille de base de 2,54...
NF UTE C93-423:1977 Composants électroniques - Organes de raccordement connecteurs multicontacts encartables et enfichables pour cartes imprimées double-face au pas de 2,54 mm type HE9 - Recueil de spécification de particulières.
NF C93-406-4-116/A1*NF EN 61076-4-116/A1:2016 Connectors for electronic equipment - Product requirements - Part 4-116 : printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
NF EN 61076-4-116/A1:2016 Connecteurs pour équipements électroniques - Exigences de produit - Partie 4-116 : connecteurs pour cartes imprimées - Spécification particulière pour un connecteur haute vitesse en deux parties avec une fonction de protection intégrée
NF EN 61076-4-116:2012 Connecteurs pour équipements électroniques - Exigences de produit - Partie 4-116 : connecteurs pour cartes imprimées - Spécification particulière pour un connecteur haute vitesse en deux parties avec une fonction de protection intégrée
NF A89-057-8:2002 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8 : welding of tubes to tube-plate joints.
NF C93-406-4-104*NF EN 61076-4-104:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications. Part 4-104 : printed board connectors with assessed quality. Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a mul
NF C93-430-13*NF EN 60603-13:1998 Connectors for frequencies below 3 MHz for use with printed boards. . Part 13 : detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in) , with free connectors for non accessible insulation di
NF C93-406-4-110*NF EN 61076-4-110:2002 Connectors for electronic equipment - Part 4-110 : printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
NF C93-406-4-103*NF EN 61076-4-103:1999 Connecxtors for use in d.c. low-frequency analogue and digital high speed data applications. Part 4-103 : printed board connectors with assessed quality. Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm.
NF C93-406-4-116*NF EN 61076-4-116:2012 Connectors for electronic equipment - Product requirements - Part 4-116 : printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
NF EN 61076-4-114:2005 Connecteurs pour équipements électroniques - Partie 4-114 : connecteurs pour cartes imprimées - Spécification particulière pour connecteurs en deux parties avec fonction de blindage intégré ayant un pas de 1 mm x 1,5 mm
NF C93-406-4-107*NF EN 61076-4-107:2002 Connectors for electronic equipment - Part 4-107 : printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, f
NF EN 60320-3/A1:2021 Connecteurs pour usages domestiques et usages généraux analogues - Partie 3 : feuilles de norme et calibres
NF EN 60320-3:2015 Connecteurs pour usages domestiques et usages généraux analogues - Partie 3 : feuilles de norme et calibres
NF EN 60320-3/A2:2022 Connecteurs pour usages domestiques et usages généraux analogues - Partie 3 : Feuilles de norme et calibres
NF EN 61076-4-107:2002 Connecteurs pour équipements électroniques - Partie 4-107 : connecteurs pour cartes imprimées sous assurance de la qualité - Spécification particulière pour les connecteurs blindés en deux parties, au pas de base de 2,0 mm, partie fixe avec sort...
NF EN 60603-8:1998 Connecteurs pour fréquences inférieures à 3 MHz pour utilisation avec cartes imprimées - Partie 8 : connecteurs pour cartes imprimées en deux parties, pour grille de base de 2,54 mm (0,1 in) à contacts mâles de section 0,63 mm X 0,63 mm.
NF C83-401-802*NF EN 175101-802:2002 Detail specification : two-part connectors for printed board for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows
NF EN 61076-4-108:2004 Connecteurs pour équipements électroniques - Partie 4-108 : connecteurs pour cartes imprimés sous assurance de la qualité - Spécification particulière pour connecteurs cable-circuit imprimé avec un pas de module de 25 mm et une fonction de blind...
NF C93-867-18-1*NF EN 50377-18-1:2019 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 18-1 : type 4+4x10.3125 Gb/s MPO (QFSP) transceiver mated with an MPO connector equipped with 12 fibre PPS ferrules terminated on
NF C93-406-4*NF EN 61076-4:2002 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4 : sectionnal specification - Printed board connectors
NF C93-406-1:1997 Connectors with assessed quality, for use in D.C., low-frequency analogue and in digital high-speed data applications. Part 4 : printed board connectors. Section 001 : blank detail specification.
NF DTU 31.3 P3/A1:2014 Travaux de bâtiment - Charpentes en bois assemblées par connecteurs métalliques ou goussets - Partie 3 : Règles de conception
NF DTU 31.3 P3:2012 Travaux de bâtiment - Charpentes en bois assemblées par connecteurs métalliques ou goussets - Partie 3 : règles de conception
NF C93-430-14*NF EN 60603-14:1999 Connectors for frequencies below 3 MHz for use with printed boards - Part 14 : detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment
NF C93-560-38*NF EN 61169-38:2015 Radio-frequency connectors - Part 38 : sectional specification - Radio frequency coaxial connectors model, slide-in (rack and panel applications) - Characteristic impedance 50 ohms (type TMA) - 50 ohms applications
NF C93-406-001*NF EN 61076-4-001:1997 Connectors with assessed quality, for use in D.C., low-frequency analogue and in digital high-speed data applications. Part 4 : printed board connectors. Section 001 : blank detail specification.
NF EN 60603-14:1999 Connecteurs pour fréquences inférieures à 3 MHz pour utilisation avec cartes imprimées - Partie 14 : spécification particulière pour les connecteurs circulaires pour applications audio et vidéo en basse fréquence tels que les équipements audio...
NF L54-176-001*NF EN 3682-001:2014 Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 oC continuous - Part 001 : technical specification
NF L54-176-002*NF EN 3682-002:2014 Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 oC continuous - Part 002 : specification of performance and contact arrangements

International Electrotechnical Commission (IEC), Board-to-Board Connector Specifications

IEC 61076-4-113:2002 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connector having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
IEC 61076-4-101:2001/COR1:2003 Corrigendum 1 - Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality; Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 6
IEC 60603-2:1980 Connectors for frequencies below 3 MHz for use with printed boards; part 2: two-part connectors for printed boards, for basic grid of 2.54 mm (0.1 in) with common mounting features
IEC 60603-2:1988 Connectors for frequencies below 3 MHz for use with printed boards; part 2: two-part connectors for printed boards, for basic grid of 2.54 mm (0.1 in) with common mounting features
IEC PAS 61076-4-115:2001 Connectors for electronic equipment - Part 4-115: Printed board connectors - Detail specification for a single-part hybrid connector, with a section of high-speed differential pair connections, and a section of low-speed, power and ground connections betw
IEC TS 62661-2-1:2013 Optical backplanes - Product specification - Part 2-1: Optical backplane using optical fibre circuit boards and multicore right angle optical connectors
IEC 61076-4-111:2002 Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality; Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm
IEC 61076-4-114:2003 Connectors for electronic equipment - Part 4-114: Printed board connectors; Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm
IEC 60603-10:1991 Connectors for frequencies below 3 MHz for use with printed boards; part 10: two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type
IEC 61076-4-116:2015 Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
IEC 61076-4-116:2012 Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors: Detail specification for a high-speed two-part connector with integrated shielding function
IEC 60603-11:1992 Connectors for frequencies below 3 MHz for use with printed boards; part 11: detail specification for concentric connectors (dimensions for free connectors and fixed connectors)
IEC 60603-13:1995 Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displ
IEC 86/439/DTS:2012 IEC/TS 62661-2-1, Ed. 1: Optical backplanes - Product specification - Part 2-1: Optical backplane using optical fibre circuit boards and multicore right angle optical connectors
IEC 61076-4-100:1994 Connectors with assessed quality for use in d.c. and low frequency analogue applications and in digital applications with high speed data rates - Part 4: Printed board connectors; section 100: Detail specification for two-part connector modules having a g
IEC 61076-4-100:2001 Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality; Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
IEC 60603-8:1990 Connectors for frequencies below 3 MHz for use with printed boards; part 8: two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm × 0,63 mm
IEC 61076-4-104:1999 Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on an
IEC 61076-4-101:1995 Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high speed data applications - Part 4: Printed boards connectors - Section 101: Detail specification for two-part connector modules having a basic grid of 2,0 mm for p
IEC 60603-2:1995 Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
IEC 60603-2:1995/AMD1:2000 Connectors for frequencies below 3 MHs for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features; Amendment 1
IEC 603-8:1990 Connectors for frequencies below 3 MHz for use with printed boards; part 8: two-part connectors for printed boards for basic grid of 2, 54 mm (0, 1 in), with square male contacts of 0, 63 mm * 0, 63 mm
IEC 60603-8:1991 Connectors for frequencies below 3 MHz for use with printed boards. Part 8: Two-part connectors for printed boards, for basic grid of 2.54 mm (0.1 in), with square male contacts of 0.63 mm x 0.63 mm
IEC 61076-4-110:2001 Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality; Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
IEC 61076-4-116:2012/AMD1:2015 Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
IEC 61076-4-116:2012+AMD1:2015 CSV Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
IEC 61076-4-101:2001 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality; Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
IEC 61076-4-108:2002 Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality; Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing densit
IEC 62496-4-214:2020 Optical circuit boards - Part 4-214: Interface standards - Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector
IEC 61076-4-103:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm
IEC PAS 61169-38:2007 Radio-frequency connectors - Part 38: Sectional specification - Radio-frequency connector model, slide-in (rack and panel applications) - Characteristic impedance 50 (type TMA) - 50 applications
IEC 61169-38:2008 Radio-frequency connectors - Part 38: Sectional specification - Radio frequency coaxial connectors model, slide-in (rack and panel applications) - Characteristic impedance 50 (type TMA) - 50 applications
IEC 60603-1:1991 Connectors for frequencies below 3 MHz for use with printed boards; part 1: generic specification; general requirements and guide for the preparation of detail specifications, with assessed quality
IEC 60603-14:1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment
IEC 61076-4-107:2001 Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality; Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, fre
IEC 61076-4-001:1996 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 001: Blank detail specification
IEC 60603-7:1990 Connectors for frequencies below 3 MHz for use with printed boards; part 7: detail specification for connectors, 8-way, including fixed and free connectors with common mating features

Defense Logistics Agency, Board-to-Board Connector Specifications

DLA MS24287 REV D VALID NOTICE 2-2013 Mated Assembly, Connector, Rack and Panel, Miniature
DLA MS24287 REV D VALID NOTICE 1-2013 Mated Assembly, Connector, Rack and Panel, Miniature
DLA MIL-STD-1531 A VALID NOTICE 2-2006 INSERT ARRANGEMENTS FOR MIL-C-83733 RACK TO PANEL CONNECTORS, SHELL SIZE A
DLA MIL-STD-1531 A VALID NOTICE 1-2001 INSERT ARRANGEMENTS FOR MIL-C-83733 RACK TO PANEL CONNECTORS, SHELL SIZE A
DLA MIL-STD-1531 A-1988 INSERT ARRANGEMENTS FOR MIL-C-83733 RACK TO PANEL CONNECTORS, SHELL SIZE A
DLA MIL-STD-1532 A VALID NOTICE 2-2006 INSERT ARRANGEMENTS FOR MIL-C-83733 RACK TO PANEL CONNECTORS, SHELL SIZE B
DLA MIL-STD-1532 A VALID NOTICE 1-2001 INSERT ARRANGEMENTS FOR MIL-C-83733 RACK TO PANEL CONNECTORS, SHELL SIZE B
DLA MIL-STD-1532 A-1988 INSERT ARRANGEMENTS FOR MIL-C-83733 RACK TO PANEL CONNECTORS, SHELL SIZE B
DLA QPL-21097-49-2006 CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD, GENERAL PURPOSE GENERAL SPECIFICATION FOR
DLA QPL-83503-34-2005 CONNECTORS, ELECTRICAL, FLAT CABLE, AND/OR PRINTED WIRING BOARD, NONENVIRONMENTAL, GENERAL SPECIFICATION FOR
DLA A-A-55531 A-2008 CONNECTORS, TELECOMMUNICATION, POLARIZED SHELL, RECEPTACLE, FEMALE RACK AND PANEL, SOLDER CONTACT, SIDE ENTRY COVER, SCREWLOCK
DLA DSCC-DWG-89065 REV B-2003 GENERAL SPECIFICATION FOR HIGH PERFORMANCE, HIGH DENSITY, TWO PIECE PRINTED CIRCUIT BOARD CONNECTOR
DLA QPL-21097-QPD-2011 Connectors, Electrical, Printed Wiring Board, General Purpose, General Specification for
DLA QPL-21097-49 NOTICE 1-2008 Connectors, Electrical, Printed Wiring Board, General Purpose, General Specification for
DLA QPL-21097-QPD-2009 Connectors, Electrical, Printed Wiring Board, General Purpose General Specification for
DLA A-A-55528 A-2008 CONNECTORS, TELECOMMUNICATION, POLARIZED SHELL. PLUG, MALE RACK AND PANEL, SOLDER CONTACT, SCREWLOCK
DLA MIL-DTL-55302/26 G-2008 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, 30 thru 140 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.100 SQ. GRID)
DLA QPL-28748-69-2006 CONNECTOR, PLUG AND RECEPTACLE, RECTANGULAR, RACK AND PANEL SOLDER TYPE AND CRIMP TYPE CONTACTS, GENERAL SPECIFICATION FOR
DLA DSCC-DWG-07013-2007 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, 41, 66, 114 CONTACT POSITIONS: FOR PRINTED WIRING BOARDS (.100 X .050 OFFSET GRID)
DLA MIL-DTL-26518 C SUPP 1-2001 CONNECTORS, ELECTRICAL, MINIATURE, RACK AND PANEL ENVIRONMENT RESISTANCE, 200 DEG. C AMBIENT TEMPERATURE GENERAL SPECIFICATION FOR
DLA MIL-DTL-26518 C-2000 CONNECTORS, ELECTRICAL, MINIATURE, RACK AND PANEL ENVIRONMENT RESISTANCE, 200 DEG. C AMBIENT TEMPERATURE GENERAL SPECIFICATION FOR
DLA QPL-28748-69 NOTICE 1-2008 Connector, Plug and Receptacle, Rectangular, Rack and Panel Solder Type and Crimp Type Contacts General Specification for
DLA QPL-28748-QPD-2010 Connector, Plug and Receptacle, Rectangular, Rack and Panel Solder Type and Crimp Type Contacts General Specification for
DLA QPL-28748-2011 Connector, Plug and Receptacle, Rectangular, Rack and Panel Solder Type and Crimp Type Contacts General Specification for
DLA MIL-DTL-83503 C-2005 CONNECTORS, ELECTRICAL, FLAT CABLE, AND/OR PRINTED WIRING BOARD, NONENVIRONMENTAL, GENERAL SPECIFICATION FOR
DLA MIL-DTL-24308 F-2007 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR
DLA MIL-DTL-28748 D (1)-2012 CONNECTOR, PLUG AND RECEPTACLE, RECTANGULAR, RACK AND PANEL SOLDER TYPE AND CRIMP TYPE CONTACTS GENERAL SPECIFICATION FOR
DLA MIL-DTL-24308 G-2009 CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR
DLA MIL-DTL-24308 G (1)-2011 CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR
DLA MIL-DTL-24308 G (2)-2012 CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR
DLA MIL-DTL-55302/26 G (1)-2010 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, 30 thru 140 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.100 SQ. GRID)
DLA QPL-83733-2013 Connectors, Electrical Miniature, Rectangular Type, Rack to Panel, Environment Resisting, 200 Degrees C Total Continuous Operating Temperature, General Specification for
DLA QPL-83733-QPD-2012 Connectors, Electrical Miniature, Rectangular Type, Rack to Panel, Environment Resisting, 200 Degrees C Total Continuous Operating Temperature, General Specification for
DLA QPL-26518-2012 Connectors, Electrical, Miniature, Rack and Panel, Environment Resistant, 200 Degrees C Ambient Temperature, General Specification for
DLA MIL-DTL-26518 C VALID NOTICE 1-2013 Connectors, Electrical, Miniature, Rack and Panel, Environment Resistant, 200 Degrees C Ambient Temperature, General Specification for
DLA QPL-24308-QPD-2009 Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for
DLA QPL-24308-QPD-2011 Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for
DLA QPL-24308-2011 Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for
DLA QPL-24308-QPD-2012 Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for
DLA MIL-DTL-83733 E SUPP 1-2013 CONNECTORS, ELECTRICAL MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200癈 TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR
DLA MIL-DTL-55302/82 C (1)-2011 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, 41, 66, 114 CONTACT POSITIONS: FOR PRINTED WIRING BOARDS (.100 X .050 OFFSET GRID)
DLA MIL-DTL-55302/161 D (1)-2011 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE, 160 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC

British Standards Institution (BSI), Board-to-Board Connector Specifications

PD IEC/TS 62661-2-1:2013 Optical backplanes. Product specification. Optical backplane using optical fibre circuit boards and multi-core right angle optical connectors
BS EN 61076-4-103:1999 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm. Cable to board conn...
BS EN 61076-4-113:2003 Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
BS EN 60603-9:1998 Connectors for frequencies below 3 MHz for use with printed boards. Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)
BS EN 61076-4-101:2001 Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
BS EN 62326-4:1997 Printed boards. Rigid multilayer printed boards with interlayer connections. Sectional specification
BS EN 61076-4-111:2002 Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordan
BS EN 61076-4-100:2002 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
BS EN 60603-13:1998 Connectors for frequencies below 3 MHz for use with printed boards. Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in) with free connectors for non-accessible insulation displacement ...
BS EN 60603-10:1998 Connectors for frequencies below 3 MHz for use with printed boards. Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type
BS EN 61076-4-116:2012 Connectors for electronic equipment. Product requirements. Printed board connectors. Detail specification for a high-speed two-part connector with integrated shielding function
BS EN 61076-4-114:2003 Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm
BS PD IEC/TS 62661-2-1:2013 Optical backplanes. Product specification. Optical backplane using optical fibre circuit boards and multi-core right angle optical connectors
BS EN IEC 62496-4-214:2020 Optical circuit boards - Interface standards. Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector
BS EN 61076-4-116:2012+A1:2016 Connectors for electronic equipment. Product requirements - Printed board connectors. Detail specification for a high-speed two-part connector with integrated shielding function
BS 9525 N0001:1982 Detail specification for multi-contact two-part printed board electrical connectors
BS EN ISO 15614-8:2002 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Welding of tubes to tube-plate joints
BS EN 61076-4-104:1999 Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm. Detail specification for two part modular c...
BS EN 61076-4-108:2003 Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm,
BS EN 61076-4-107:2001 Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part wit...
BS EN 61076-4-108:2002 Electronic Equipment Connectors Quality-assessed printed board connectors complying with IEC 60917-1 with a basic grid of 2.5mm, 25mm module spacing and integrated shielding, and can be used for cable-to-board connectors with a 15mm lateral packing densit
BS EN 60603-2:1998 Connectors for frequencies below 3 MHz for use with printed boards. Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
BS EN 123500:1992 Specification for harmonized system of quality assessment for electronic components. Sectional specification: flexible printed boards with through connections
BS EN 60603-8:1998 Connectors for frequencies below 3 MHz for use with printed boards. Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm x 0,63 mm
BS EN 123400:1992 Harmonized system of quality assessment for electronic components. Sectional specification: flexible printed boards without through connections
BS EN 61076-4-105:1998 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applicatio...
BS EN 61076-4-110:2002 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shield...
BS EN 61076-4:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Sectional specification. Printed board connectors
BS G 184 to G 188:1964 Specification for aluminium terminal ends and in-line connectors for hexagonal crimping to aircraft aluminium electrical cables
BS EN 60603-7-1:2002 Connectors for frequencies below 3 MHz for use with printed boards - Detail specification for 8-way, shielded free and fixed connectors with common mating features, with assessed quality
BS DD IEC/PAS 61169-38:2009 Radio-frequency connectors - Sectional specification - Radio frequency coaxial connectors model, slide-in (rack and panel applications) - Characteristic impedance 50 ohms (type TMA) - 50 ohms applications
BS EN 3682-004:2006 Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Size 2 receptacle - Product standard
BS EN 3682-008:2006 Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Size 4 receptacle - Product standard
BS EN 3682-006:2006 Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Size 3 receptacle - Product standard
BS EN 61076-4-001:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Blank detail specification
BS EN 61169-38:2009 Radio-frequency connectors — Part 38: Sectional specification — Radio frequency coaxial connectors model, slide-in (rack and panel applications) — Characteristic impedance 50T (type TMA) — 50T applications
BS EN 60603-14:1999 Connectors for frequencies below 3 MHz for use with printed boards. Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment
BS EN 60603-7-7:2002 Connectors for frequencies below 3 MHz for use with printed boards - Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 600 MHz (category 7, shielded)
BS EN 123600:1997 Harmonized system of quality assessment for electronic components - Sectional specification - Flex-rigid multilayer printed boards with through connections
BS EN 123500:1990 Specification for harmonized system of quality assessment for electronic components - Sectional specification: flexible printed boards with through connections
BS EN 123400:1990 Harmonized system of quality assessment for electronic components - Sectional specification: flexible printed boards without through connections
BS EN 175101-802:2000 Harmonized system of quality assessment for electronic components - Detail specification - Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows
BS 7657:1993 Specification for fuses (cut-outs), ancillary terminal blocks and interconnecting units up to 100 A rating, for power supplies to buildings
BS EN 61076-4-102:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-cent...
BS EN 3682-001:2006 Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Technical specification
BS EN 3682-001:2007 Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Technical specification
BS EN 123400-800:1991 Harmonized system of quality assessment for electronic components - Capability detail specification: flexible printed boards without through-connections
BS EN 123500-800:1991 Harmonized system of quality assessment for electronic components - Capability detail specification: flexible printed boards with through-connections
BS EN 175101-809:2004 Harmonized system of quality assessment for electronic components - Detail specification - Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality
BS EN 175101-809:2000 Harmonized system of quality assessment for electronic components - Detail specification - Detail Specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75101-801, with assessed quality
BS CECC 23800-801:1998 Harmonized system of quality assessment for electronic components - Capability detail specification: flexible multilayer printed boards with through connections
BS EN 60603-1:2000 Connectors for frequencies below 3 MHz for use with printed boards. Generic specification. General requirements and guide for the preparation of detail specifications with assessed quality

Danish Standards Foundation, Board-to-Board Connector Specifications

DS/EN 61076-4-113:2003 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
DS/EN 61076-4-100:2002 Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
DS/EN 60603-9:1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)
DS/EN 61076-4-101/Corr.1:2004 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
DS/EN 61076-4-101:2002 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
DS/EN 61076-4-111:2002 Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm
DS/EN 61076-4-107:2002 Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, fr
DS/EN 61076-4-114:2003 Connectors for electronic equipment - Part 4-114: Printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm
DS/EN 61076-4-108:2002 Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing densi
DS/EN 60603-10:1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 10: Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type
DS/EN 61076-4-110:2002 Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
DS/EN 61076-4-103:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm
DS/EN 60603-2/A1:2005 Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
DS/EN 61076-4-116:2012 Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
DS/EN 60603-13:1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displ
DS/EN 175101-820:2001 Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows
DS/EN 61076-4-104:2000 Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on mul
DS/EN 61076-4:1996 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors
DS/EN 60603-2:1999 Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0.1 in) with common mounting features
DS/EN 175101-809/Corr.:2005 Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality
DS/EN 175101-809:2004 Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality
DS/EN 60603-8:1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 8: Two-part connectors for printed boards, for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm x 0,63 mm
DS/EN 4640-004:2008 Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 004: Receptacle optical connector - Product standard
DS/EN 61169-38:2009 Radio-frequency connectors - Part 38: Sectional specification - Radio frequency coaxial connectors model, slide-in (rack and panel applications) - Characteristic impedance 50 ohm (type TMA) - 50 ohm applications
DS/EN 61076-4-001:1997 Connectors with assessed quality for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 001: Blank detail specification
DS/EN 61076-4-102:1998 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in
DS/EN 4640-001:2009 Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 001: Technical specification
DS/EN 61076-4-105:1999 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide

ES-UNE, Board-to-Board Connector Specifications

UNE-EN 61076-4-113:2003 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications (Endorsed by AENOR in June of 2003.)
UNE-EN 61076-4-100:2001 Connectors for electronic equipment -- Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes (Endorsed by AENOR in May of 2002.)
UNE-EN 61076-4-101:2001 Connectors for electronic equipment -- Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 (Endor...
UNE-EN 60603-13:1998 Connectors for frequencies below 3 MHz for use with printed boards -- Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation d...
UNE-EN 61076-4-108:2002 Connectors for electronic equipment -- Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing d...
UNE-EN 60603-10:1998 Connectors for frequencies below 3 MHz for use with printed boards -- Part 10: Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type. (Endorsed by AENOR in November of 2001.)
UNE-EN 60603-2:1998 Connectors for frequencies below 3 MHz for use with printed boards -- Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features. (Endorsed by AENOR i...
UNE-EN 60603-2:1998/A1:2005 Connectors for frequencies below 3 MHz for use with printed boards -- Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features (Endorsed by AENOR in...
UNE-EN 61076-4-107:2001 Connectors for electronic equipment -- Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards...
UNE-EN 175101-802:1999 Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows (Endorsed by AENOR in June of 2000.)
UNE-EN 175101-809:2004 Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality (Endorsed by AENOR in July of 2004.)
UNE-EN 175101-809:2004 CORR:2005 Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality (Endorsed by AENOR in September of 2005.)
UNE-EN 61076-4-110:2002 Connectors for electronic equipment -- Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function (Endorsed by AENOR ...
UNE-EN IEC 62496-4-214:2020 Optical circuit boards - Part 4-214: Interface standards - Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector (Endorsed by Asociación Española de Normalización in August of 2020.)
UNE-EN 61076-4-116:2012 Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function (Endorsed by AENOR in August of 2012.)
UNE-EN 61076-4-116:2012/A1:2016 Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function (Endorsed by AENOR in May of 2016.)
UNE-EN 61076-4-104:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications -- Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on ...
UNE-EN 61076-4-103:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications -- Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm. (Endorsed...
UNE-EN 4640-004:2008 Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 004: Receptacle optical connector - Product standard (Endorsed by AENOR in July of 2008.)
UNE-EN 4640-003:2008 Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 003: Plug optical connector - Product standard (Endorsed by AENOR in July of 2008.)
UNE-EN 61076-4-102:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications -- Part 4: Printed board connectors -- Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plu...
UNE-EN 61169-38:2009 Radio-frequency connectors -- Part 38: Sectional specification - Radio frequency coaxial connectors model, slide-in (rack and panel applications) - Characteristic impedance 50 O (type TMA) - 50 O applications (Endorsed by AENOR in May of 2009.)
UNE-EN 4640-001:2009 Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 001: Technical specification (Endorsed by AENOR in April of 2009.)
UNE-EN 61076-4-105:1998 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications -- Part 4: Printed board connectors -- Section 105 : Detail specification for 9 mm circular connector with 3 to 8 contacts for use in ...
UNE-EN 60603-14:1999 Connectors for frequencies below 3 MHz for use with printed boards -- Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment. (Endorsed by AENOR in November o...

Professional Standard - Electron, Board-to-Board Connector Specifications

SJ/T 11308-2005 Connectors for electronic equipment--Part 4-101: Printed board connectors with assessed quality-Datail spacification for two-part connector modules,having a basic grid of 2.0mm for printed boards and backplanes in accordance with accordance with IEC 60917
SJ 51717/2-1994 Detail specification for connectors for printed circuit board(2.54mm spacing),Type Cy4
SJ/T 11309-2005 Connectors for use in d.c,low frequency analogue and digital high speed data applications-part 4-104: printed board connecyors with assessed quality-detail specification for two-part modular connectors,basic grid of 2.0mm,with terminations on a multiple g
SJ 51717/1-1994 Detail specification for fixed connectors for printed circuit board(3.96mm spacing),Type CY2
SJ 50681/57-1994 Connectors,receptacle,electrical,coaxial,radio frequency(series SMA(uncabled),socket contact,printed circuit,class 2),detail specification for
SJ 50681/59-1994 Connectors,receptacle,coaxial,radio frequency(series SMB(uncabled),pin contact,printed circuit,class 2),detail specification for
SJ 50681/76-1994 Connectors,receptacle,Coaxial,radio frequency,(series SMC(uncabled),pin contact,printed circuit,class 2),detail specification for
SJ/T 11306-2005 Connectors with assessed quality for DC/low frequency analogue and digital high speed data applications Part 4: Sectional specifications for printed board connectors
SJ 50681/77-1994 Connectors,receptacle,coaxial,radio frequency,(series SMC(uncabled),pin contact,printed circuit,reght angle class 2),detail specification for
SJ 50681/58-1994 Connectors,receptacle,electrical,coaxial,radio frequency(series SMA(uncabled),socket contact,printed circuit,right angle,class 2),detail specification for
SJ 50681/60-1994 Connectors,receptacle,coaxial,radio frequency,(series SMB(uncabled),pin contact,printed circuit,reght angle,class 2),detail specification for
SJ 51920.11-1995 Connectors,electrical,miniature,coaxial,environment resistant type,coaxial,straight,hermetically sealed panel adapter,two jack ends,series Ⅲ,class Y,type 5,detail specification for
SJ/T 11307-2005 Connectors with assessed quality, for use in d.c,low- frequency analogue and in digital high speed data applications-part 4: Printed board connecyors-Section 001:Blank detail specificationo

AENOR, Board-to-Board Connector Specifications

UNE-EN 60603-9:2001 Connectors for frequencies below 3 MHz for use with printed boards -- Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in).
UNE-EN 61076-4-111:2003 Connectors for electronic equipment -- Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 m
UNE-EN 61076-4:1997 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 4: SECTIONAL SPECIFICATIONS. PRINTED BOARD CONNECTORS.
UNE-EN 61076-4-001:1998 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 4: PRINTED BOARD CONNECTORS. SECTION 001: BLANK DETAIL SPECIFICATION.
UNE-EN 60603-8:2001 Connectors for frequencies below 3 MHz for use with printed boards -- Part 8: Two-part connectors for printed boards, for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm x 0,63 mm.

CENELEC - European Committee for Electrotechnical Standardization, Board-to-Board Connector Specifications

EN 61076-4-101:1998 Connectors with Assessed Quality@ for Use in d.c.@ Low-Frequency Analogue and in Digital High-Speed Data Applications Part 4: Printed Board Connectors Section 101: Detail Specification for Two-Part Connector Modules Having a Basic Grid of 2@0 mm for Print
EN 61076-4-100:1998 Connectors with Assessed Quality@ for Use in d.c.@ Low-Frequency Analogue and in Digital High-Speed Data Applications Part 4: Printed Board Connectors Section 100: Detail Specification for Two-Part Connector Modules Having a Grid of 2@5 mm (0@098 in) for
EN 61076-4-116:2012 Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
EN 175101-809:1999 Detail Specification: Two-Part Connectors for Printed Boards Having a Grid of 2@54 mm@ Short Version in Compliance with CECC 75 101-801@ with Assessed Quality

Lithuanian Standards Office , Board-to-Board Connector Specifications

LST EN 61076-4-100-2003 Connectors for electronic equipment. Part 4-100: Printed board connectors with assessed quality. Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes (IEC 61076-4-100:2001)
LST EN 61076-4-113-2003 Connectors for electronic equipment. Printed board connectors. Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications (IEC 61076-4-113:2002)
LST EN 61076-4-101-2002 Connectors for electronic equipment. Part 4-101: Printed board connectors with assessed quality. Detail specification for two-part connector modules, having a basic grid of 2, 0 mm for printed boards and backplanes in accordance with IEC 60917 (IEC 61076-
LST EN 60603-9-2001 Connectors for frequencies below 3 MHz for use with printed boards. Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2, 54 mm (0, 1 in) (IEC 60603-9:1990)
LST EN 61076-4-111-2003 Connectors for electronic equipment. Part 4-111: Printed board connectors with assessed quality. Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm i
LST EN 61076-4-108-2003 Connectors for electronic equipment. Part 4-108: Printed board connectors with assessed quality. Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density
LST EN 61076-4-114-2004 Connectors for electronic equipment. Part 4-114: Printed board connectors. Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm (IEC 61076-4-114:2003)
LST EN 61076-4-107-2002 Connectors for electronic equipment. Part 4-107: Printed board connectors with assessed quality. Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free
LST EN 60603-10-2001 Connectors for frequencies below 3 MHz for use with printed boards. Part 10: Two-part connectors for printed boards for basic grid of 2, 54 mm (0, 1 in), inverted type (IEC 60603-10:1991)
LST EN 60603-13-2001 Connectors for frequencies below 3 MHz for use with printed boards. Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2, 54 mm (0, 1 in), with free connectors for non-accessible insulation disp
LST EN 61076-4-101-2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications. Part 4: Printed board connectors. Section 101: Detail specification for two-part connector modules having a basic grid of 2, 0 mm for pr
LST EN 61076-4-110-2003 Connectors for electronic equipment. Part 4-110: Printed board connectors with assessed quality. Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function (IEC 61076-4-110:2001)
LST EN 61076-4-116-2012 Connectors for electronic equipment - Product requirements -- Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function (IEC 61076-4-116:2012)
LST EN 175101-802-2002 Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2, 54 mm on 3 or 4 rows
LST EN 61076-4-100-2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications. Part 4: Printed board connectors. Section 100: Detail specification for two-part connector modules having a grid of 2, 5 mm (0,098 in) f
LST EN 61076-4-103-2001 Connectors for use in d.c. low-frequency analogue and digital high speed data applications. Part 4-103: Printed board connectors with assessed quality. Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm (IEC 61076-4-103
LST EN 61076-4-104-2001 Connectors for use in d.c. low-frequency analogue and digital high speed data applications. Part 4-104: Printed boards connectors with assessed quality. Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a mul
LST EN 60603-2-2001/A1-2005 Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features (IEC 60603-2:1995/A1:2000
LST EN 60603-2-2001 Connectors for frequencies below 3 MHz for use with printed boards. Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2, 54 mm (0, 1 in) with common mounting features (IEC 60603-2:1995)
LST EN 175101-809-2004 Detail specification: Two-Part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality
LST EN 175101-809-2004/AC-2005 Detail specification: Two-Part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality
LST EN 4640-004-2008 Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 004: Receptacle optical connector - Product standard
LST EN 61076-4-2001 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications. Part 4: Sectional specification. Printed board connectors (IEC 61076-4:1995)
LST EN 61169-38-2009 Radio-frequency connectors - Part 38: Sectional specification - Radio frequency coaxial connectors model, slide-in (rack and panel applications) - Characteristic impedance 50 ? (type TMA) - 50 ? applications (IEC 61169-38:2008)
LST EN 60603-8-2001 Connectors for frequencies below 3 MHz for use with printed boards. Part 8: Two-part connectors for printed boards, for basic grid of 2, 54 mm (0, 1 in), with square male contacts of 0, 63 mm x 0, 63 mm (IEC 60603-8:1990)
LST EN 3682-002-2013 Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 002: Specification of performance and contact arrangements
LST EN 4640-001-2009 Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 001: Technical specification
LST EN 61076-4-105-2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications. Part 4: Printed board connectors. Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide r
LST EN 61076-4-102-2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Part 4: Printed board connectors. Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in un
LST EN 61076-4-001-2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications. Part 4: Printed board connectors. Section 001: Blank detail specification (IEC 61076-4-001:1996)

Professional Standard - Aerospace, Board-to-Board Connector Specifications

QJ 1890-1990 Printed circuit board external connection method and design specification
QJ 2927.2-1997 Detailed specifications for J18 series small rectangle electrical connectors of printed circuit board terminals

Electronic Components, Assemblies and Materials Association, Board-to-Board Connector Specifications

ECA EIA-364-83-1999(R2007) TP-83 SHELL-TO-SHELL AND SHELL-TOBULKHEAD RESISTANCE TEST PROCEDURE FOR ELECTRICAL CONNECTORS
ECA EIA-364-61-2013 TP-61 Resistance to Soldering Heat from Rework Test Procedure for Electrical Connectors and Sockets Mounted on Printed Circuit Boards
ECA EIA-364-61A-2014 TP-61A Resistance to Soldering Heat from Rework Test Procedure for Electrical Connectors and Sockets Mounted on Printed Circuit Boards

PT-IPQ, Board-to-Board Connector Specifications

IEC - International Electrotechnical Commission, Board-to-Board Connector Specifications

TS 62661-2-1-2013 Optical backplanes – Product specification – Part 2-1: Optical backplane using optical fibre circuit boards and multi-core right angle optical connectors (Edition 1.0)
PAS 61076-4-115-2001 Connectors for Electronic Equipment - Part 4-115: Printed Board Connectors - Detail Specification for a Single-Part Hybrid Connector@ with a Section of High-Speed Differential Pair Connections@ and a Section of Low-Speed@ Power and Ground Connections betw
PAS 61076-3-109-2001 Connectors for Electronic Equipment - Part 3-109: Detail Specification for Two-Part Cable to Board Connector for High Speed Data Application in a Harsh Industrial Environment - Protection Rate IP67 According to IEC 60529 (Edition 1.0)
PAS 61169-38-2007 Radio-frequency connectors – Part 38: Sectional specification – Radio-frequency coaxial connectors model@ slide-in (rack and panel applications) – Characteristic impedance 50 ohm (type TMA) – 50 ohm applications (Edition 1.0)

SAE - SAE International, Board-to-Board Connector Specifications

SAE AIR6151A-2013 Torque, Threaded Application, Electrical Connector, Accessory and Terminal Board Installation
SAE J1453-3-2009 Specification for O-Ring Face Seal Connectors: Part 3—Requirements@ Dimensions@ and Tests for Steel Unions@ Bulkheads@ Swivels@ Braze Sleeves@ Connectors@ Caps@ and Connectors with SAE J1926-2 Inch Stud Ends
SAE J1453-3-2012 Specification for O-Ring Face Seal Connectors: Part 3—Requirements@ Dimensions@ and Tests for Steel Unions@ Bulkheads@ Swivels@ Braze Sleeves@ Connectors@ Caps@ and Connectors with SAE J1926-2 Inch Stud Ends
SAE J1453-3-2007 Specification for O-Ring Face Seal Connectors: Part 3—Requirements@ Dimensions@ and Tests for Steel Unions@ Bulkheads@ Swivels@ Braze Sleeves@ Connectors@ Caps@ and Connectors with SAE J1926-2 Inch Stud Ends

国家市场监督管理总局、中国国家标准化管理委员会, Board-to-Board Connector Specifications

GB/T 11313.38-2018 Radio-frequency connectors—Part 38: Sectional specification for 50 Ω model,slide-in radio frequency coaxial connectors (type TMA) for rack and panel applications

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Board-to-Board Connector Specifications

GB/T 34744-2017 Determination method of design values for dimension lumber and truss plate connection

CZ-CSN, Board-to-Board Connector Specifications

CSN EN 33-2005
CSN 49 0173 Cast.1-1983 Plywood. Determination of the bond quality. Basic and common regulations

American Society for Testing and Materials (ASTM), Board-to-Board Connector Specifications

ASTM A67-00(2016) Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked
ASTM A3-01(2012) Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
ASTM A724/A724M-09(2013) Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels
ASTM A844/A844M-09(2015) Standard Specification for Steel Plates, 9&x2009;%&x2009; Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process

American National Standards Institute （ANSI), Board-to-Board Connector Specifications

ANSI/EIA 364-97:1997 Housing Panel Retention Test Procedure for Electrical Connectors
ANSI X3.151-1987 Office Machinery and Supplies - Bond Papers and Index Bristols - Common Sheet Sizes

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Board-to-Board Connector Specifications

GJB 1717-1993 Generic specification for electrical connectors for printed circuit boards

Korean Agency for Technology and Standards (KATS), Board-to-Board Connector Specifications

KS C IEC 60603-5:2004 Connectors for frequencies below 3 MHz for use with printed boards-Part 5:Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm(0.1 in) spacing
KS C IEC 60603-2:2004 Connectors for frequencies below 3MHz for use with printed boards-Part 2:Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54 mm(0.1in) with common mounting features
KS C IEC 60603-2:2014 Connectors for frequencies below 3 MHz for use with printed boards — Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54 mm(0.1 in) with common mounting features
KS C IEC 60326-10-2003(2019)
KS C IEC 60603-10:2005 Connectors for frequencies below 3 MHz for use with printed boards－Part 10：Two-part connectors for printed boards for basic grid of 2.54 mm(0.1 in), inverted type
KS C IEC 60603-5:2014 Connectors for frequencies below 3 MHz for use with printed boards — Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm(0.1 in) spacing
KS C 6589-1992(1997) GENERAL RULES OF ONE-PART CONNECTORS FOR PRINTED WIRING BOARD
KS C 6589-1992 GENERAL RULES OF ONE-PART CONNECTORS FOR PRINTED WIRING BOARD
KS C 6589-1982 GENERAL RULES OF ONE-PART CONNECTORS FOR PRINTED WIRING BOARD
KS C IEC 60603-8:2004 Connectors for frequencies below 3 MHz for use with printed boards-Part 8:Two-part connectors for printed boards for basic grid of 2.54 mm(0.1 in), with square male contacts of 0.63 mm×0.63 mm
KS C IEC 60603-8:2014 Connectors for frequencies below 3 MHz for use with printed boards－Part 8：Two－part connectors for printed boards for basic grid of 2.54 mm(0.1 in), with square male contacts of 0.63 mm×0.63 mm
KS C IEC 60603-2-2014(2019) Connectors for frequencies below 3 MHz for use with printed boards — Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54 mm(0.1 in) w
KS C IEC 60603-7:2020 Connectors for frequencies below 3 MHz for use with printed boards —Part 7：Detail specification for connectors, 8－way, including fixed and free connectors with common mating features, with assessed qu
KS C IEC 60603-1-2003(2008) Connectors for frequencies below 3 MHz for use with printed boards－Part 1：Generic specification－General requirements and guide for the preparation of detail specifications, with assessed quality
KS C IEC 60603-7:2005 Connectors for frequencies below 3MHz for use with printed boards－Part 7：Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality
KS C IEC 60603-1:2003 Connectors for frequencies below 3 MHz for use with printed boards-Part 1:Generic specification-General requirements and guide for the preparation of detail specifications, with assessed quality
KS C IEC 60603-1:2013 Connectors for frequencies below 3 MHz for use with printed boards－Part 1：Generic specification－General requirements and guide for the preparation of detail specifications, with assessed quality

RU-GOST R, Board-to-Board Connector Specifications

GOST IEC 62326-4-2013 Printed boards. Part 4. Rigid multilayer printed boards with interlayer connections. Sectional specification
GOST IEC 62326-4-1-2013 Printed boards. Part 4-1. Rigid multilayer printed boards with interlayer connections. Sectional specification. Section 1. Capability Detail Specification. Performance levels A, B and C

IECQ - IEC: Quality Assessment System for Electronic Components, Board-to-Board Connector Specifications

QC 480301XX0012-2002 Connectors for Electronic Equipment - Part 4-111: Printed Board Connectors with Assessed Quality - Detail Specification for Two-Part Power Connector Modules@ for Printed Boards and Backplanes Having Early Mating Features@ and Having a Basic Grid of 2@5 mm
QC 480301/XX 0008-2001 Connectors for Electronic Equipment - Part 4-107: Printed Board Connectors with Assessed Quality - Detail Specification for Shielded Two-Part Connectors Having a Basic Grid of 2@0 mm@ Fixed Part with Solder and Press-In Terminations for Printed Boards@ Fr
QC 480301XX0009-2002 Connectors for Electronic Equipment - Part 4-108: Printed Board Connectors with Assessed Quality - Detail Specification for Cable-to-Board Connectors with a Modular Pitch of 25 mm and Integrated Shielding Function@ Applicable for Transverse Packing Densit
QC 480301/XX 0002-1995 Connectors with Assessed Quality@ for Use in d.c. Low-Frequency Analogue and in Digital High Speed Data Applications - Part 4: Printed Board Connectors - Section 101: Detail Specification for Two-Part Connector Modules Having a Basic Grid of 2@0 mm for Pr
QC 010000/ IN0001 IS 1-1992 Two Part Connectors for Printed Circuit Boards for Basic Grid of 2@54mm (0.1 Inch) with Common Mounting Euro Connectors Style R@ R/2 & HE11 (Connectors Conforming to 500 Mating Cycles and Having 1.27 Micron Gold Plating Finish over Contact Area)
QC 480301/XX 0001-1994 Connectors with Assessed Quality for Use in d.c and Low Frequency Analogue Applications and in Digital Applications with High Speed Data Rates - Part 4: Printed Board Connectors - Section 100: Detail Specification Two-Part Connector Modules Having a Grid
QC 480300-1995 Connectors with Assessed Quality@ for Use in d.c.@ Low Frequency Analogue and in Digital High-Speed Data Applications - Part 4: Sectional Specification - Printed Board Connectors (IEC 1076-4 ED 1)
QC 010000 XX0003-1996 Connectors for Frequencies Below 3 MHz for Use with Printed Boards - Part 7: Detail Specification for Connectors@ 8-Way@ Including Fixed and Free Connectors with Common Mating Features@ with Assessed Quality (IEC 603-7 ED 2)
QC 480301-1996 Connectors with Assessed Quality@ for Use in d.c.@ Low Frequency Analogue and in Digital High-Speed Data Applications - Part 4: Printed Board Connectors - Section 001: Blank Detail Specification (IEC 1076-4-001 ED 1)
QC 480301/XX 0006-1995 Connectors with Assessed Quality@ for Use in d.c.@ Low-Frequency Analogue and in Digital High-Speed Data Applications - Part 4: Printed Board Connectors - Section 105: Detail Specification for 9 mm Circular Connector with 3 to 8 Contacts for Use in a Wide

Japanese Industrial Standards Committee (JISC), Board-to-Board Connector Specifications

JIS C 5420:1991 General rules of one-part connectors for printed wiring board
JIS C 5401-4:2005 Connectors for electronic equipment -- Part 4: Printed board connectors with assessed quality -- Sectional specification
JIS C 5401-4-001:2005 Connectors for electronic equipment -- Part 4-001: Printed Board Connectors with assessed quality -- Blank Detail Specification

Military Standard of the People's Republic of China-General Armament Department, Board-to-Board Connector Specifications

GJB 3159-1998 General specification for rectangular electrical connectors for cabinets and panels
GJB 10167-2021 General specification for printed board electrical connectors for high speed data processing
GJB 2446/19-2017 J2446/15 Detailed specification for housing-located microrectangular receptacle electrical connectors with soldered-type straight jack contacts for Class M printed circuit boards
GJB 2446/18-2017 J2446/14 Detailed specification for housing-positioned microrectangular plug electrical connectors with soldered-type straight pin contacts for Class M printed circuit boards
GJB 2446/28-2017 Detailed Specification for J30 Series Soldered Straight Pin Contact Housing Positioned Micro Rectangular Plug Electrical Connectors for Class P Printed Circuit Boards
GJB 2446/24-2017 Detailed Specification for J30J Series M Class M Printed Circuit Board Solder Type Straight Pin Contact Housing Positioning Micro Rectangular Plug Electrical Connectors
GJB 2446/29-2017 Detailed specification for J30 series of soldered-type straight jack contact housing positioned microrectangular receptacle electrical connectors for Class P printed circuit boards
GJB 2446/25-2017 J30J Series Detailed specification for solder-type straight jack contact housing positioning micro rectangular receptacle electrical connectors for Class M printed circuit boards

HU-MSZT, Board-to-Board Connector Specifications

MSZ 05 75.5801-1976

工业和信息化部, Board-to-Board Connector Specifications

SJ/T 10495-2016 Connectors for printed boards with frequencies below 3 MHZ Part 11: Detailed specifications for coaxial connectors (free connectors and fixed connector dimensions)

United States Navy, Board-to-Board Connector Specifications

NAVY QPL-28859-2012 Connector Component Parts, Electrical Backplane, Printed-Wiring, General Specification For
NAVY QPL-28859-10-1998 CONNECTOR COMPONENT PARTS, ELECTRICAL BACKPLANE, PRINTED WIRING, GENERAL SPECIFICATION FOR
NAVY QPL-28859-QPD-2011 Connector Component Parts, Electrical Backplane, Printed-Wiring, General Specification For
NAVY QPL-81703-11-2001 CONNECTOR, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING

ECIA - Electronic Components Industry Association, Board-to-Board Connector Specifications

EIA-616-A-2002 Detail Specification for 2 Millimeter@ Two-Part Connectors for Use with Printed Boards and Backplanes
EIA-364-61-2013 TP-61 Resistance to Soldering Heat from Rework Test Procedure for Electrical Connectors and Sockets Mounted on Printed Circuit Boards
EIA-364-61A-2014 TP-61A Resistance to Soldering Heat from Rework Test Procedure for Electrical Connectors and Sockets Mounted on Printed Circuit Boards
EIA-700AAAB-1996 Detail Specification for 1.0 mm@ Two-Part Connectors for Use with Parallel Printed Boards
SP4644-A-2002 Detail Specifications for 2 Millimeter@ Two Part Connectors for Use with Printed Boards and Backplanes (Comment Period Expires: May 14@ 2002)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Board-to-Board Connector Specifications

GB/T 15157.2-2015 Connectors for frequencies below 3 MHz for use with printed boards—Part 2：Detail specification for two-part connectors with assessed quality，for printed boards，for basic grid of 2.54 mm with common mounting features
GB/T 15157.2-1998 Connectors for frequencies below 3MHz for use with printed boards. Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54mm (0.1 in) with common mounting features
GB/T 15157.14-2007 Connectors for frequencies below 3 MHz for use with printed boards Part 14: Detail specification for circular connectors for low frequency audio and video applications such as audio, video and audio-visual equipment
GB/T 15157.7-2002 Connectors for frequencies below 3MHz for use with printed boards Part 7: Detail specification for connectors,8-way,including fixed and free connectors with common mating features,with assessed quality
GB/T 7497.3-2008 Microprocessor system bus.8-bit and 16-bit data(MULTIBUS I).Part 3:Mechanical and pin descriptions for the Eurocard configuration with pin and socket(indirect) connectors
GB/T 11313.29-2015 Radio frequency connectors.Part 29:Sectional specification for miniature radio frequency coaxial connector (type 1.0/2.3) with screw,snap-on, push-pull or quick-lock, slide-in (rack and panel applications ) mechanism with characteristic impedance 50 Ω for

YU-JUS, Board-to-Board Connector Specifications

JUS N.R4.707-1989 Connectors for frequencies belau 3 MHz. Tito-part connectors for printed boards, for basic grid of 2,54 mm. Type T. Climatic category 55/125/56
JUS N.R4.706-1989 Cotmectors for frequencies belou 3 Mffz. Two-part connectors for printe? boards, for basic grid of 2,54 mn. Types: B, C, D, ?, G, E, Q, R, S, U and V. Climatic category 55/125/56

Electronic Components, Assemblies and Materials Association, Board-to-Board Connector Specifications

ECA IS-84-1992 Interim Detail Specification for 2.5 mm Two Part Connector for Use in Electronic Equipment
ECA EIA-616-A-2002 Detail Specification for 2 Millimeter, Two-Part Connectors for Use with Printed Boards and Backplanes [Superseded: ECA SP4644-A]
ECA 700AAAB-1996 Detail Specification for 1.0 mm, Two-Part Connectors for Use with Parallel Printed Boards

Professional Standard - Aviation, Board-to-Board Connector Specifications

HB 20106-2012 Specification for MK6 series panel mount low insertion force multiple insert type rectangular electrical connectors

IN-BIS, Board-to-Board Connector Specifications

PL-PKN, Board-to-Board Connector Specifications

PN T06031-01-1989 Electromechanical components for electronic e?uipment Connectors for fre?uencies below 3 MHz for use with printed boards General rules and guide for the preparation of detail specifications
PN-EN IEC 62496-4-214-2021-02 E Optical circuit boards--Part 4-214: Interface standards--Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector (IEC 62496-4-214:2020)

SE-SIS, Board-to-Board Connector Specifications

SIS SS-CECC 75100-1992 Sectional specifica tion: Two part and edge socket connectors for printedboard application
SIS SS CECC 75101-1985 Example detail specification/ Blank detail specification:

European Committee for Standardization (CEN), Board-to-Board Connector Specifications

prEN 60603-7-1992 Connectors for frequencies below 3 MHz for use with printed boards; part 7: detail specification for connectors, 8-way, including fixed and free connectors with common mating features (IEC 603-7:1990)

KR-KS, Board-to-Board Connector Specifications

KS C IEC 60603-7-2020 Connectors for frequencies below 3 MHz for use with printed boards —Part 7：Detail specification for connectors, 8－way, including fixed and free connectors with common mating features, with assessed qu

NL-NEN, Board-to-Board Connector Specifications

NEN 10603-7-1994 Connectors for frequencies below 3 MHz for use with printed boards. Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features (IEC 603-7:1990)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Board-to-Board Connector Specifications

PREN 4640-004-2007 Aerospace series Connectors@ optical@ rectangular@ rack and panel@ multicontact@ 1@25 diameter ferrule@ with removable alignment sleeve holder Part 004: Receptacle optical connector Product standard (Edition P1)
PREN 4640-003-2007 Aerospace series Connectors@ optical@ rectangular@ rack and panel@ multicontact@ 1@25 diameter ferrule@ with removable alignment sleeve holder Part 003: Plug optical connector Product standard (Edition P1)
PREN 4640-001-2007 Aerospace series Connectors@ optical@ rectangular@ rack and panel@ multicontact@ 1@25 diameter ferrule@ with removable alignment sleeve holder Part 001: Technical specification (Edition P1)

RO-ASRO, Board-to-Board Connector Specifications

STAS SR CEI 603-1-1995 Connectors for frequencies below 3 MHz for use with printed boards. Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality

Group Standards of the People's Republic of China, Board-to-Board Connector Specifications

T/CECS 1053-2022 Technical specification for the application of metal glass fiber plastic composite connectors for precast concrete sandwich insulation wall panels

European Association of Aerospace Industries, Board-to-Board Connector Specifications

AECMA PREN 3682-002-2000 Aerospace Series Connectors, Plug and Receptacle, Electrical, Rectangular, Interchangeable Insert Type, Rack to Panel, Operating Temperature 150 Degrees C Continuous Part 002: Specification of Performance and Contact Arrangements Edition P 1