ZH
RU
ES

Calibration set Test set

Calibration set Test set, Total:500 items.

In the international standard classification, Calibration set Test set involves: Construction materials, Metrology and measurement in general, Quality, Electricity. Magnetism. Electrical and magnetic measurements, Freight distribution of goods, Lifting equipment, Shipbuilding and marine structures in general, Optoelectronics. Laser equipment, Road vehicles in general, Equipment for petroleum and natural gas industries, Solar energy engineering, Applications of information technology, Special purpose vehicles, Transformers. Reactors, Testing of metals, Packaging materials and accessories, Road engineering, Semiconductor devices, Medical sciences and health care facilities in general, Space systems and operations, Structure and structure elements, Road vehicle systems, Kitchen equipment, Thermodynamics and temperature measurements, Installations in buildings, Food products in general, Electrical accessories, Mechanical testing, Products of the textile industry, Plastics, Electrical and electronic testing, Integrated circuits. Microelectronics, Telecommunication systems, Electric traction equipment, Railway rolling stock, Valves, Medical equipment, Elements of buildings, Air quality, Equipment for the chemical industry, Rectifiers. Convertors. Stabilized power supply, Protection against crime, Packaging and distribution of goods in general, Water quality, Waxes, bituminous materials and other petroleum products, Spools. Bobbins, Barrels. Drums. Canisters, Rubber and plastics products, Aids for disabled or handicapped persons, Particle size analysis. Sieving, Sports equipment and facilities, Environmental testing, Radiocommunications, Veterinary medicine, Alarm and warning systems, Earthworks. Excavations. Foundation construction. Underground works, Mining and quarrying, Electromechanical components for electronic and telecommunications equipment.

German Institute for Standardization, Calibration set Test set

DIN EN 932-5:2012 Tests for general properties of aggregates - Part 5: Common equipment and calibration; German version EN 932-5:2012
DIN 52106:2013-12 Testing of aggregates - Test methods for the assessment of the weathering resistance
DIN 42545:1987-08 Transformers; oil trap DN 25; requirements and test
DIN EN ISO 9806:2018-04 Solar energy - Solar thermal collectors - Test methods (ISO 9806:2017); German version EN ISO 9806:2017
DIN SPEC 30752-1:2018-03 Refuse collection vehicles - Environmental efficiency - Part 1: Requirements on the test procedure for energy consumption at the collection area
DIN EN 933-5:2005 Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles (including amendment A1:2004); German version EN 933-5:1998 + A1:2004
DIN 52009:2006 Test methods for aggregates - Determination of water absorption under pressure
DIN EN 1744-7:2012 Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate); German version EN 1744-7:2012
DIN EN 1501-4:2023-07 Refuse collection vehicles - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles; German version EN 1501-4:2023
DIN 52009:2013 Test methods for aggregates - Determination of water absorption under pressure
DIN 52098:2005 Aggregates test methods - Determination of particle size distribution by wet sieving
DIN EN ISO 9806:2018 Solar energy - Solar thermal collectors - Test methods (ISO 9806:2017)
DIN EN 1367-2:2010-02 Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test; German version EN 1367-2:2009
DIN EN ISO 26101-2:2023-02 Acoustics - Test methods for the qualification of the acoustic environment - Part 2: Determination of the environmental correction (ISO/DIS 26101-2:2023); German and English version prEN ISO 26101-2:2023 / Note: Date of issue 2023-01-13
DIN EN 1744-6:2006 Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement; English version of DIN EN 1744-6:2006-12

GM North America, Calibration set Test set

GM GM9074P-1989 Hardness Testing - Correction for Rounds
GM9647P-1993 Procedure for Crowbar Testing Structurally Bonded Plastic Assemblies

American National Standards Institute （ANSI), Calibration set Test set

ANSI/NCSL Z540-1-1994 Calibration -- Calibration Laboratories and Measuring and Test Equipment -- General Requirements
ANSI/ASHRAE 93-2003 Solar Collectors, Method of Testing to Determine the Thermal Performance of
BS EN 1501-4:2023 Refuse collection vehicles. General requirements and safety requirements Noise test code for refuse collection vehicles (British Standard)
ANSI/ASHRAE 93-2010 Methods of Testing to Determine the Thermal Performance of Solar Collectors

National Metrological Technical Specifications of the People's Republic of China, Calibration set Test set

JJF 1160-2006 Calibration Specification of Small & Medium Scale Digital Integrated Circuit Testing System
JJF 1238-2010 Calibration Specification for the Testing System for Microcircuits Electro-static Discharge(ESD) Sensitivity
JJF 1238-2022 Calibration specification for integrated circuit electrostatic discharge susceptibility test equipment

BE-NBN, Calibration set Test set

Association Francaise de Normalisation, Calibration set Test set

NF ISO 1496-1/A1:2016 Conteneurs de la série 1 - Spécifications et essais - Partie 1 : conteneurs d'usage général pour marchandises diverses - Amendement 1
NF H90-003-1/A1*NF ISO 1496-1/A1:2016 Series 1 freight containers - Specification and testing - Part 1 : general cargo containers for general purposes - Amendment 1
FD P18-663:2021 Aggregates - Procedures for implementing NF EN test standards on aggregate standart test methods
NF P18-621-5*NF EN 932-5:2012 Tests for general properties of aggregates - Part 5 : common equipment and calibration
NF P18-579:1990 Aggregate - Abrasiveness and grindability tests
NF P18-622-7*NF EN 933-7:1998 Tests for geometrical properties of aggregates - Part 7 : determination of shell content - Percentage of shells in coarse aggregates
NF H90-015/A1:2008 Series 1 freight containers - Specification and testing - Part 2 : thermal containers.
NF ISO 1496-5:1993 Conteneurs de la série 1 - Spécifications et essais - Partie 5 : conteneurs plates-formes et type plate-forme.
NF ISO 1496-1:2015 Conteneurs de la série 1 - Spécifications et essais - Partie 1 : conteneurs d'usage général pour marchandises diverses
NF EN ISO 9806:2017 Énergie solaire - Capteurs thermiques solaires - Méthodes d'essai
NF P18-622-6:2002 Test for geometrical properties of aggregates - Part 6 : assessment of surface characteristics - Flow coefficient of aggegates.
NF P18-622-6*NF EN 933-6:2014 Tests for geometrical properties of aggregates - Part 6 : assessment of surface characteristics - Flow coefficient of aggregates
NF P18-622-5*NF EN 933-5:1998 Tests for geometrical properties of aggregates. Part 5 : determination of percentage of crushed and broken surfaces in coarse aggregate particles.
NF P18-622-5/A1*NF EN 933-5/A1:2005 Tests for geometrical properties of aggregates - Part 5 : determination of percentage of crushed and broken surfaces in coarse aggregate particles
NF P18-653-8*NF EN 1367-8:2014 Tests for thermal and weathering properties of aggregates - Part 8 : determination of resistance to disintegration of Lightweight Aggregates
NF E29-699/A1*NF EN ISO 22435/A1:2013 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing - Amendment 1
NF EN ISO 9696:2017 Qualité de l'eau - Activité alpha globale - Méthode d'essai par source épaisse
NF H90-003-1*NF ISO 1496-1:2015 Series 1 freight containers - Specification and testing - Part 1 : general cargo containers for general purposes
NF P18-622-1:1997 Tests for geometrical properties of aggregates. Part 1 : determination of particle size distribution. Sieving method.
NF EN ISO 8669-2:1997 Poches de recueil d'urine - Partie 2 : prescriptions et méthodes d'essai.
NF EN ISO 8670-2:1997 Poches de recueil pour stomie - Partie 2 : prescriptions et méthodes d'essai.
NF P18-660-7*NF EN 1744-7:2012 Tests for chemical properties of aggregates - Part 7 : determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)
NF P18-653-7*NF EN 1367-7:2014 Tests for thermal and weathering properties of aggregates - Part 7 : determination of resistance to freezing and thawing of Lightweight aggregates
NF EN IEC 60068-2-21:2021 Essais d'environnement - Partie 2-21 : essais - Essai U : robustesse des sorties et des dispositifs de montage incorporés
NF P18-660-6*NF EN 1744-6:2007 Tests for chemical properties of aggregates - Part 6 : determination of the influence of recycled aggregate extract on the initial setting time of cement
NF P18-650-11*NF EN 1097-11:2013 Tests for mechanical and physical properties of aggregates - Part 11 : determination of compressibility and confined compresssive strength of lightweight aggregates
NF B10-621:2007 Natural stone test methods - Determination of flexural strength under concentrated load.

Danish Standards Foundation, Calibration set Test set

DS/ISO 1496-4/Amd.1:1994 Series 1 freight containers - Specification and testing - Part 4: Non-pressurized containers for dry bulk - Amendment 1: 1AAA and 1BBB containers
DS/ISO 1496-5/Amd.1:2000 Series 1 freight containers - Specification and testing - Part 5: Platform and platform-based containers - Amendment 1: 1AAA and 1BBB containers
DS/ISO 1496-3/Amd. 1:2006 Series 1 freight containers - Specification and testing - Part 3: Tank containers for liquids, gases and pressurized dry bulk - Amendment 1: Testing of the external restraint (longitudinal) dynamic
DS/ISO 1496-2:2008 Series 1 freight containers - Specification and testing - Part 2: Thermal containers
DS/ISO/TR 15070/Amd .1:2006 Series 1 freight containers - Rationale for structural test criteria - Amendment 1: Guidance on structural integrity
DS/ISO 1496-5/Amd.2:2004 Series 1 freight containers - Specification and testing - Part 5: Platform and platform-based containers
DS/ISO 1496-1:2013 Series 1 freight containers - Specification and testing - Part 1: General cargo containers for general purposes
DS/EN 933-10:2009 Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving)
DS/EN ISO 8669-2:1997 Urine collection bags - Part 2: Requirements and test methods
DS/EN ISO 8670-2:1997 Ostomy collection bags - Part 2: Requirements and test methods
DS/ISO 6517:2013 Air cargo - Certified lower deck containers - Design and testing

United States Navy, Calibration set Test set

NAVY MIL-PRF-32070-2002 TEST PROGRAM SETS [Superseded: NAVY MIL-STD-2077 B CANC NOTICE 2, NAVY MIL-STD-2077 B CANC NOTICE 1, NAVY MIL-STD-2077 B, NAVY MIL-STD-2077 A, NAVY MIL-STD-2077]
NAVY MIL-T-5486 C NOTICE 2-1996 TEST SET, MAGNETIC DETECTOR AN/ASM-4
NAVY MIL-T-5486 C VALID NOTICE 1-1958 TEST SET, MAGNETIC DETECTOR AN/ASM-4
NAVY MIL-T-5486 C-1956 TEST SET, MAGNETIC DETECTOR AN/ASM-4
NAVY MIL-T-81527 B NOTICE 1-1995 TEST SET, MISSILE CONTROL SYSTEM, AWG-10 SIDE BENCH
NAVY MIL-T-81527 B-1971 TEST SET, MISSILE CONTROL SYSTEM, AWG-10 SIDE BENCH

U.S. Military Regulations and Norms, Calibration set Test set

ARMY MIL-T-48467 C VALID NOTICE 4-2013 Test Set, Field
ARMY MIL-A-10516-1950 ADAPTER, SKATE TEST CLUSTER (100-LB. SIZE)
ARMY MIL-PRF-49503 C-2013 GENERAL STYLE AND FORMAT, TEST PROGRAM SETS FOR AUTOMATIC TEST EQUIPMENT
ARMY MIL-PRF-49503 B (2)-2006 GENERAL STYLE AND FORMAT, TEST PROGRAM SETS FOR AUTOMATIC TEST EQUIPMENT

Society of Automotive Engineers (SAE), Calibration set Test set

SAE AIR5436A-2019 Test Cell Analytical Thrust Correction
SAE ARP5482-2003 Photometric Data Acquisition Procedures for Impact Test
SAE J855-2009 Test Method of Stretch and Set of Textiles and Plastics

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Calibration set Test set

GB/T 16905-1997 Test method for the crane of container front-handling mobile
GB 51122-2015 Design Specifications for Integrated Circuit Packaging and Testing Plants
GB/T 43063-2023 Integrated circuit CMOS image sensor testing method
GB/T 42975-2023 Semiconductor integrated circuit driver test methods
GB/T 42838-2023 Semiconductor Integrated Circuit Hall Circuit Test Method
GB/T 43061-2023 Semiconductor integrated circuit PWM controller testing method
GB/T 36477-2018 Semiconductor integrated circuit.Measuring methods for flash memory
GB/T 4377-2018 Semiconductor integrated circuits.Measuring method of voltage regulators
GB/T 43040-2023 Semiconductor integrated circuit AC/DC converter testing method
GB/T 17999.9-2008 SPF chicken.Microbiological surveillance.Part 9:Tube agglutination test for SPF chicken

British Standards Institution (BSI), Calibration set Test set

BS EN 932-5:2000 Tests for general properties of aggregates - Common equipment and calibration
BS EN 932-5:2012 Tests for general properties of aggregates. Common equipment and calibration
BS 812-112:1990 Testing aggregates - Method for determination of aggregate impact value (AIV)
BS 812-110:1990 Testing aggregates - Methods for determination of aggregate crushing value (ACV)
BS 812-100:1990 Testing aggregates. General requirements for apparatus and calibration
BS 812-106:1985 Testing aggregates. Method for determination of shell content in coarse aggregate
BS 812-119:1985 Testing aggregates. Method for determination of acid-soluble material in fine aggregate
BS 812-111:1990 Testing aggregates - Methods for determination of ten per cent fines value (TFV)
BS 812-113:1990 Testing aggregates. Method for determination of aggregate abrasion value (AAV)
BS ISO 1496-2:2008 Series 1 freight containers - Specification and testing - Thermal containers
BS EN 1744-3:2002 Tests for chemical properties of aggregates - Preparation of eluates by leaching of aggregates
BS EN 1744-7:2012 Tests for chemical properties of aggregates. Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)
BS 812-2:1995 Testing aggregates - Methods for determination of density
BS ISO 24162:2022 Test method for energy consumption of refuse collection vehicles
BS EN 933-5:1998 Tests for geometrical properties of aggregates - Determination of percentage of crushed and broken surfaces in coarse aggregate particles
BS EN 1367-8:2014 Tests for thermal and weathering properties of aggregates. Determination of resistance to disintegration of Lightweight Aggregates
BS 812-121:1989 Testing aggregates. Method for determination of soundness
BS EN 1744-1:1998 Tests for chemical properties of aggregates - Chemical analysis
BS ISO 1496-1:2013+A1:2016 Series 1 freight containers. Specification and testing. General cargo containers for general purposes
BS 812-105.2:1990 Testing aggregates - Methods for determination of particle shape - Elongation index of coarse aggregate
BS 812-105.2:1990(1998) Testing aggregates - Methods for determination of particle shape - Elongation index of coarse aggregate
BS EN 1367-7:2014 Tests for thermal and weathering properties of aggregates. Determination of resistance to freezing and thawing of Lightweight aggregates
BS 812-118:1988 Testing aggregates. Methods for determination of sulphate content
BS EN 62670-1:2014 Photovoltaic concentrators (CPV). Performance testing. Standard conditions
BS 812 Sec.105.2:1990 Testing aggregates. Methods for determination of particle shape. Elongation index of coarse aggregate
BS EN 50206-2:2010 Railway applications - Rolling stock - Pantographs - Characteristics and tests - Pantographs for metros and light rail vehicles
BS EN 1097-5:1999 Tests for mechanical and physical properties of aggregates - Determination of the water content by drying in a ventilated oven
BS EN 1097-11:2013 Tests for mechanical and physical properties of aggregates. Determination of compressibility and confined compressive strength of lightweight aggregates
BS 812 Pt.2:1995 Testing aggregates - Methods for determination of density
BS 812-117:1988 Testing aggregates. Method for determination of water-soluble chloride salts
BS 812-124:1989 Testing aggregates - Method for determination of frost-heave
BS 812-124:2009 Testing aggregates Part 124: Method for determination of frost heave
BS 812-103.1:1985 Testing aggregates. Method for determination of particle size distribution. Sieve tests
BS EN 1744-6:2006 Tests for chemical properties of aggregates - Determination of the influence of recycled aggregate extract on the initial setting time of cement
BS EN 1744-6:2007 Tests for chemical properties of aggregates - Determination of the influence of recycled aggregate extract on the initial setting time of cement
BS 812-105.1:1989 Testing aggregates. Methods for determination of particle shape. Flakiness index
BS PAS 1008:2014 Specification for the performance and testing of a single-use flexitank
BS 812-105.1:1990 Testing aggregates. Methods for determination of particle shape. Flakiness index
BS 812-109:1990 Testing aggregates - Methods for determination of moisture content
BS PAS 1008:2016 Specification for the performance and testing of a single-use flexitank
BS EN 933-7:1998 Tests for geometrical properties of aggregates - Determination of shell content - Percentage of shells in coarse aggregates
BS EN 17255-3:2021 Stationary source emissions. Data acquisition and handling systems. Specification of requirements for the performance test of data acquisition and handling systems
BS EN 933-1:1997 Tests for geometrical properties of aggregates - Determination of particle size distribution - Sieving method
BS 812-114:1990 Testing aggregates. Method for determination of the polished-stone value
BS 812-114:1989 Testing aggregates. Method for determination of the polished-stone value
BS EN 933-1:2012 Tests for geometrical properties of aggregates. Determination of particle size distribution. Sieving method
BS EN ISO 9806:2017 Tracked Changes. Solar energy. Solar thermal collectors. Test methods
BS EN 1097-5:2008 Tests for mechanical and physical properties of aggregates - Part 5:Determination of the water content by drying in a ventilated oven
BS ISO 1496-3:2019 Tracked Changes. Series 1 freight containers. Specification and testing. Tank containers for liquids, gases and pressurized dry bulk
BS EN 60068-2-21:2006 Environmental testing - Tests - Test U. Robustness of terminations and integral mounting devices
22/30442407 DC BS EN 1501-4. Refuse collection vehicles. General requirements and safety requirements. Part 4. Noise test code for refuse collection vehicles
BS ISO/IEC 24727-5:2011 Identification cards. Integrated circuit card programming interfaces. Testing procedures

YU-JUS, Calibration set Test set

JUS Z.M1.032-1982 Freight containers. Determination of transport capability and proper functions of containers at the time of delivery
JUS Z.M8.001-1987 Series 1 freight containers. General cargo containers forgeneralpurposes. Specification and testing
JUS B.B8.045-1978 Testing of natural rock. Testing of natural and crushed aggregate rock by machine ?Los Angeles "
JUS Z.M8.007-1989 Series 1 freigbt contaiuers. Air mode modular ccmtainers. Specification and testing
JUS U.M8.096-1987 Testing of coating and stripping of bitumen-aggregate mixtures. Testing ofbehaviour under water
JUS Z.M8.003-1988 Series 1 freight containers. Tank containers for liqulds and gases. Specification and testing
JUS N.R1.900-1980 Digital integrated circuits. Acceptance and reSability. Ekctrical tests
JUS N.A5.788-1985 Basic environmental testing procedures. Test U: Robustness of terminations and integral mounting devices. Torgue
JUS N.A5.787-1985 Basic environmental testing procedures. Test Uc: Robustness of terminations and integral mounting devices. Torsion

Standard Association of Australia （SAA）, Calibration set Test set

AS 1141.3.1:1996 Methods for sampling and testing aggregates - Sampling - Aggregates
AS 1141.21:1997 Methods for sampling and testing aggregates - Aggregate crushing value
AS 1141.25.2:2003(R2013)
AS 1141.4:2000(R2013)
AS 1141.30:1996 Methods for sampling and testing of aggregates - Coarse aggregate quality by visual comparison
AS 1141.50:1998 Methods for sampling and testing aggregates - Resistance to stripping of cover aggregates from binders
AS 1141.42:1999 Methods for sampling and testing aggregates - Pendulum friction test
AS 1141.40:1999 Methods for sampling and testing aggregates - Polished aggregate friction value - Vertical road-wheel machine
AS 1141.41:1999 Methods for sampling and testing aggregates - Polished aggregate friction value - Horizontal bed machine
AS 1141.2:1999 Methods for sampling and testing aggregates - Basic testing equipment
AS 1141.1:1996 Methods for sampling and testing aggregates - Definitions
AS 1141.12:1996 Methods for sampling and testing of aggregates - Materials finer than 75 micrometre in aggregates (by washing)
AS 1141.18:1996/Amdt 1:1998
AS 1141.31:1997 Methods for sampling and testing aggregates - Light particles
AS 1141.28:1999 Methods for sampling and testing aggregates - Ball mill value
AS 1141.6.2:1996 Methods for sampling and testing of aggregates - Particle density and water absorption of coarse aggregate - Pycnometer method
AS 1141.30.2:2009
AS 1141.23:1995 Methods for sampling and testing aggregates - Los Angeles value
AS 1141.0:1999 Methods for sampling and testing aggregates - List of methods
AS 4155.7:1993 Test methods for general access floors - Test for 300 mm x 300 mm concentrated load
AS 4155.8:1993 Test methods for general access floors - Test for 25 mm x 25 mm concentrated load
AS 1141.35:1995 Methods for sampling and testing aggregates Method 35: Sugar
AS 1141.24:1997 Methods for sampling and testing aggregates - Aggregate soundness - Evaluation by exposure to sodium sulfate solution
AS 1141.27:1995 Methods for sampling and testing aggregates - Resistance to wear by attrition
AS 1141.24:2013
AS 1141.11:1996 Methods for sampling and testing aggregates - Particle size distribution by sieving
AS 1141.11.1:2009/Amdt 1:2011
AS 1141.29:1999 Methods for sampling and testing aggregates - Accelerated soundness index by reflux
AS 1141.36:1997 Methods for sampling and testing aggregates - Sulfur in metallurgical slag, crushed rock or other pavement materials

PL-PKN, Calibration set Test set

PN M48055 ArkusZ3-1972 Aggregate mixing plant estings
PN M48050 ArkusZ3-1972 Aggregate drying plant estings
PN E06090-1987 Capacitors lor power-lactor correction
PN M35350-1987 Gaz central heating boiler lowtemperature Re?uirements and tests

International Organization for Standardization (ISO), Calibration set Test set

ISO 1496-1:1984/Amd 1:1987 Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes — Amendment 1
ISO 1496-1:2013/DAmd 2 Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes — Amendment 2
ISO 1496-2:2008 Series 1 freight containers - Specification and testing - Part 2: Thermal containers
ISO/AWI 9806 Solar energy — Solar thermal collectors — Test methods
ISO/PRF 1496-4:2023 Series 1 freight containers — Specification and testing — Part 4: Non-pressurized containers for dry bulk
ISO/DIS 1496-4:1987 Series 1 freight containers — Specification and testing — Part 4: Non-pressurized containers for dry bulk
ISO 1496-4:2023 Series 1 freight containers — Specification and testing — Part 4: Non-pressurized containers for dry bulk
ISO 1496-2:1996/Cor 1:1997 Series 1 freight containers - Specification and testing - Part 2: Thermal containers; Technical Corrigendum 1
ISO 1496-5:2018 Series 1 freight containers — Specification and testing — Part 5: Platform and platform-based containers
ISO 20290-3:2019 Aggregates for concrete — Test methods for mechanical and physical properties — Part 3: Determination of aggregate crushing value (ACV)
ISO 1496-1:1984 Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes
ISO/CD 19281 Air cargo — Fire resistant containers — Design, performance and testing requirements
ISO/DIS 19281 Air cargo — Fire resistant containers — Design, performance and testing requirements

Indonesia Standards, Calibration set Test set

SNI 19-4781-1998 Test method for inchie impact test for shipping containers
SNI 19-2784-1992 Containers, Specification and testing. series 1. Part 1 : General loading containers for general purpose
SNI 14-4747-1998 Compression test method for corrugated paperboard boxes for transportation containers

AENOR, Calibration set Test set

UNE 7151:1959 CUTBACKS AGGREGATES COTING TEST.
UNE 28597:1988 FREIGHT CONTAINERS. AIR/SURFACE (INTERMODAL) GENERAL PURPOSE CONTAINERS. SPECIFICATION AND TESTS.
UNE-EN 1367-8:2015 Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates
UNE 146507-2:1999 EX TEST FOR AGGREGATES. DETERMINATION OF THE POTENCIAL REACTIVITY OF AGGREGATES. CHEMICAL METHOD. PART 2: DETERMINATION OF THE ALKALI-CARBONATE REACTIVITY.
UNE 117102-1:2000 Series 1 freight containers. Specification and testing. Part 1: General cargo containers for general purposes.
UNE-EN 933-10:2010 Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving)
UNE-EN ISO 9806:2014 Solar energy - Solar thermal collectors - Test methods (ISO 9806:2013)
UNE-EN 1097-11:2013 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates
UNE 49759:1979 SERIES 1 FREIGHT CONTAINERS. SPECIFICATION AND TESTING. THERMAL CONTAINERS

Taiwan Provincial Standard of the People's Republic of China, Calibration set Test set

CNS 17025-2007 General requirements for the competence of testing and calibration laboratories
CNS 17025-2001 General requirements for the competence of testing and calibration laboratories
CNS 8105-1981 Test Method for Transistor Collector - Emitter Saturation Voltage
CNS 13041-1995 Calibration and Testing Laboratory Qccreditation System - General Requirements for Operation and Recognition

国家药品监督管理局, Calibration set Test set

YY/T 1592-2018 ABO positive typing and RhD blood typing test card (column agglutination method)

NZ-SNZ, Calibration set Test set

NZS 4407.4.2.4:1991 Methods of sampling and testing road aggregates Test 4.2.4 Calibration of a nuclear surface moisture-density gauge using standard blocks
NZS 4407:1991 METHODS OF SAMPLING AND TESTING ROAD AGGREGATES
AS/NZS 2535.1:2007 Test methods for solar collectors Part 1: Thermal performance of glazed liquid heating collectors including pressure drop (Incorporates Amendment No. 1: August 2014)

CU-NC, Calibration set Test set

NC 41-32-1985 Leather. Conglomerates Testing Methods
NC 68-05-1985 Industrial Household Apparatus. Flat Solar Collectors for Fluids Testing Methods
NC 61-51-1988 Telecommunications. Integrated Monitor Amplifier. Testing Methods

RO-ASRO, Calibration set Test set

STAS 6299/15-1977 TANK-CONTAINERS Test methodes
STAS 6299/4-1990 Freight containers. General cargo containers for general purposes. Technical specifications and test methods
STAS 9261-1981 Tests of metals DROP-WEIGHT TEST OX BUILD-UP WELDED SPECIMENS
STAS 10630-1976 DIGITAL INTEGRATED CIRCUITS Measuring methods of outptut quantities
STAS 6299/18-1979 PLATFORM-CONTAINERS Technicalrequirements and test methods
STAS 6299/19-1979 CONTAINERS FOR SOLID BULK GOODS Technical requirements and test methods
STAS 6299/17-1990 Freight containers platform based containers with incomplet superstructure. Technical specifications and test methods
STAS 730-1989 NATURAL AGGREGATES FOR RAILWAYS WORKS AND ROADS Test methods

Professional Standard - Navy, Calibration set Test set

HJB 317-2005 Test Assembly Acceptance Requirements

European Committee for Standardization (CEN), Calibration set Test set

EN 932-5:1999 Tests for General Properties of Aggregates - Part 5: Common Equipment and Calibration
EN 1367-8:2014 Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates
prEN 933-5-2020 Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed particles in coarse and all-in natural aggregates
EN 1367-7:2014 Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates
EN 933-7:1998 Tests for geometrical properties of aggregates - Part 7: Determination of shell content - Percentage of shells in coarse aggregates
EN 12079:1999 Offshore Containers - Design, Construction, Testing, Inspection and Marking
EN 933-11:2009 Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate (Incorporating corrigendum November 2009)
EN 1744-1:1998 Tests for Chemical Properties of Aggregates - Part 1: Chemical Analysis
EN 14468-2:2015 Table tennis - Part 2: Posts for net assemblies - Requirements and test methods
EN 1744-8:2012 Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates
EN 1744-6:2006 Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement

American Society for Testing and Materials (ASTM), Calibration set Test set

ASTM E1362-05 Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
ASTM E1362-10 Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
ASTM E1362-15 Standard Test Methods for Calibration of Non-Concentrator Photovoltaic Non-Primary Reference Cells
ASTM E1362-15(2019) Standard Test Methods for Calibration of Non-Concentrator Photovoltaic Non-Primary Reference Cells
ASTM E1125-16(2020) Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
ASTM D999-07 Standard Test Methods for Vibration Testing of Shipping Containers
ASTM D999-08 Standard Test Methods for Vibration Testing of Shipping Containers
ASTM D3744-97 Standard Test Method for Aggregate Durability Index
ASTM D999-01 Standard Test Methods for Vibration Testing of Shipping Containers
ASTM E905-87(2013) Standard Test Method for Determining Thermal Performance of Tracking Concentrating Solar Collectors
ASTM E905-87(2021) Standard Test Method for Determining Thermal Performance of Tracking Concentrating Solar Collectors
ASTM D3744-03 Standard Test Method for Aggregate Durability Index
ASTM E1125-05 Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
ASTM E1125-10 Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
ASTM D5711-03 Standard Test Method for Determining the Adherent Coating on Coarse Aggregates
ASTM D5444-98 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
ASTM D4169-04 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D4169-01 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D4169-99e1 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D4169-08 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D4728-01 Standard Test Method for Random Vibration Testing of Shipping Containers
ASTM D4728-95 Standard Test Method for Random Vibration Testing of Shipping Containers
ASTM D2419-02 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
ASTM D2419-95 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
ASTM D4728-06 Standard Test Method for Random Vibration Testing of Shipping Containers
ASTM C29/C29M-97 Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate
ASTM C29/C29M-97(2003) Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate
ASTM C29/C29M-17a Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate

National Fire Protection Association (NFPA), Calibration set Test set

NFPA 3 & 4H-2015 Commissioning and Integrated System Testing Handbook
NFPA 4 ERTA 1-2014 Standard for Integrated Fire Protection and Life Safety System Testing

Japanese Industrial Standards Committee (JISC), Calibration set Test set

JIS Z 9325:1996 General requirements for the competence of calibration and testing laboratories
JIS Q 17025:2005 General requirements for the competence of testing and calibration laboratories
JIS A 1104 ERRATUM 1:2000 Methods of test for bulk density of aggregates and solid content in aggregates (Erratum 1)
JIS A 1158:2014 Method for reducing samples of aggregate to testing size
JIS Z 1612:1995 Test code of insulated container for domestic trade
JIS Z 0201:1989 Methods of designating on component parts and points of containers when testing
JIS Z 0201:2017 Methods of designating on component parts and points of containers when testing
JIS Z 9358:1996 Calibration and testing laboratory accreditation systems -- General requirements for operation and recognition
JIS A 1145:2001 Method of test for alkali-silica reactivity of aggregates by chemical method
JIS A 1146:2001 Method of test for alkali-silica reactivity of aggregates by mortar-bar method
JIS A 1103:2003 Method of test for amount of material passing test sieve 75 mum in aggregates
JIS A 1103:2014 Method of test for amount of material passing test sieve 75 mum in aggregates
JIS A 1122:1998 Method of test for soundness of aggregates by use of sodium sulfate
JIS A 1145:2007 Method of test for alkali-silica reactivity of aggregates by chemical method
JIS A 1146:2007 Method of test for alkali-silica reactivity of aggregates by mortar-bar method
JIS A 1145:2017 Method of test for alkali-silica reactivity of aggregates by chemical method
JIS A 1121:2001 Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine
JIS A 1121:2007 Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine

CZ-CSN, Calibration set Test set

CSN 26 9350-1983 ISO freight containers series 1. Platform containers. Specification and testing.
CSN 35 0019 Cast.03-1979 Rotating electrical machines. Vibration, tests of aggregates
CSN 26 9347-1982 Thermal freight containers — specification and testing.
CSN 73 6172-1994
CSN 56 0001-1964 Conversion and correction tables for testing methods according to CSN 56 0240 and CSN 56 0246
CSN 48 1211-1997 Collection, Quality and Methods for Testing Forest Tree Seeds
CSN 26 9355-1983 Series 1 freight containers - Specification and testing - Part 3: Tank containers for liquids and gases
CSN ISO 1496-4:1994 Series 1 freight containers - Specification and testing - Part 4: Non-pressurized containers for dry bulk
CSN ISO 1496-5:1994 Series 1 freight containers - Specification and testing - Part 5: Platform and platform-based containers
CSN 01 9903-1963 Testing of Mechanical Resistance of Shipping Containers and Packaging
CSN ISO 1496-3:1994 Series 1 freight containers. Specification and testing. Part 3: Tank containers for liquids, gases and pressurized dry bulk
CSN 26 9340-1980 ISO freight containers series 1. Specification and testing. Basic regulations
CSN EN 196-7-1993 Meethods of testing cement; Methods of taking and preparing samples of cement

The American Road & Transportation Builders Association, Calibration set Test set

AASHTO T 224-2001 Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test
AASHTO T 113-2006 Standard Method of Test for Lightweight Pieces in Aggregate
AASHTO T 248-2014 Standard Method of Test for Reducing Samples of Aggregate to Testing Size
AASHTO T 112-2000 Standard Method of Test for Clay Lumps and Friable Particles in Aggregate
AASHTO T 279-2012 Standard Method of Test for Accelerated Polishing of Aggregates Using the British Wheel

CO-ICONTEC, Calibration set Test set

ICONTEC 1516-1980

Korean Agency for Technology and Standards (KATS), Calibration set Test set

KS F 2513-2002(2017) Testing method for lightweight pieces in aggregate
KS F 2513-1982 Testing method for lightweight pieces in aggregate
KS T ISO 1496-2:2002 Series 1 freight containers－Specification and testing－Part 2：Thermal containers
KS M ISO 8222-2003(2008) Petroleum measurement systems－Calibration－Temperature corrections for use when calibrating volumetric proving tanks
KS F 2581-2013(2018) Standard test method for determination of aggregates impacting value?Method of test for production control of aggregate
KS M ISO 3810:2020 Floor tiles of agglomerated cork — Methods of test
KS B ISO 7500-1:2003 Metallic materials-Verification of static uniaxial testing machines-Part 1:Tension/compression testing machines-Verification and calibration of the force-measuring system
KS B ISO 7500-1:2013 Metallic materials－Verification of static uniaxial testing machines－Part 1：Tension/compression testing machines－Verification and calibration of the force-measuring system
KS F 2403-2010 Standard test method of making and curing concrete specimens
KS C 5113-1983(1998) MEASURING METHODS FOR MOS DIGITAL INTEGRATED CIRCUITS
KS C 5113-1983 MEASURING METHODS FOR MOS DIGITAL INTEGRATED CIRCUITS
KS B ISO 9806:2016 Solar energy — Solar thermal collectors — Test methods
KS C 6050-1985(2000) MEASURING METHODS FOR BIPOLAR DIGITAL INTEGRATED CIRCUITS
KS C 6050-1985 MEASURING METHODS FOR BIPOLAR DIGITAL INTEGRATED CIRCUITS
KS F 2550-2017 Methods of test for total moisture content of aggregate and surface moisture in aggregate by drying
KS F 2468-1997 Testing method for staining materials in 1ightweight concrete aggregate
KS F 2468-1983 Testing method for staining materials in 1ightweight concrete aggregate
KS F 2545-2017 Testing method for potential reactivity of aggregates(Chemical method)
KS F 2545-1982 Testing method for potential reactivity of aggregates(Chemical method)
KS F 2355-2013 Standard test method for coating and stripping of asphalt-aggregate mixtures
KS T 1309-2015(2020) Method of revolving hexagonal drum test for packages and shipping containers
KS F 2355-1982 Standard test method for coating and stripping of asphalt-aggregate mixtures
KS P ISO 8670-2:2018 Ostomy collection bags — Part 2: Requirements and test methods
KS F 2507-2007(2017) Method of test for soundness of aggregates by use of sodium sulfate
KS F 2516-2007 Method of test for content of soft particles in coarse aggregate by scratching
KS C IEC 62528:2015 Standard Testability Method for Embedded Core-based Integrated Circuits
KS F 2516-1985 Method of test for content of soft particles in coarse aggregate by scratching

Professional Standard - Machinery, Calibration set Test set

JB/T 8428-1996 Calibration of standard test blocks for ultrasonic testing instruments of steel welds

IN-BIS, Calibration set Test set

IS 7917-1994 Freight containers - air/surface (intermodal) general purpose containers - specification and tests
IS 7341 Pt.2-1974
IS 13288 Pt.4-1993 Series 1 Freight Containers - Specification and Testing Part 4 Non - Pressurized Containers for Dry Bulk
IS 6241-1971
IS 7917 Pt.2-1975
IS 8638 Pt.3-1977
IS 13288 Pt.1-1993
IS 12641-1989
IS 11296 Pt.2-1985

AT-ON, Calibration set Test set

ONORM L 5265-1986 Testing of sampling units in milk collecting vehicles
ONORM ISO 1496 Teil.1:1987 Series 1 freight Containers; specification and testing; general cargo Containers for general purposes
ONORM ISO 1496 Teil.2:1980 Series 1 freight Containers — Specification and testing — Part II: Thermal Containers
OENORM EN 933-5-2020 Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed particles in coarse and all-in natural aggregates
ONORM M 7716-1981 Fiat plate collectors jor the use of solar energy; type testing; test report
ONORM M 7714-1995 Covered solar collectors - Collector efficiency, effective thermal capacity and pressure drop - Test specifications
ONORM ISO 1496 Teil.5:1985 Series 1 freight Containers; specification and testing; Platform (Container)
ONORM E 3652-1989 Tests on cables and flexible cords; flame retardance-test on bunched cables
ONORM EN 196-7-1992 Methods of testing cement - Methods of taking and preparing samples of cement

Professional Standard - Electron, Calibration set Test set

SJ/T 10111-1991 Automatic measuring instruments for integrated circuits for Type GH3123
SJ/Z 2926-1988 Test methods for properties of mask-making equipment for manufacturing of ICs
SJ 20646-1997 The measuring methods of DC/DC converters for hybrid integrated circuits
SJ 20237-1993 Verification regulation of model GH3123 IC automatic tester
SJ/T 10196-1991 Measuring methods of MSI and SSI digital IC static parameter testers
SJ 20869-2003 Measuring methods for LiNbO3 integrated optical guided-wave modulators
SJ/T 11222-2000 General specification for Integrated circuit cards.Part 3:Test methods

AASHTO - American Association of State Highway and Transportation Officials, Calibration set Test set

T2-1991 Standard Method of Test for Sampling of Aggregates
T 113-2018 Standard Method of Test for Lightweight Particles in Aggregate
T 248-2014 Standard Method of Test for Reducing Samples of Aggregate to Testing Size
T 248-2002 Standard Method of Test for Reducing Samples of Aggregate to Testing Size
T 248-2011 Standard Method of Test for Reducing Samples of Aggregate to Testing Size
T 304-2008 Standard Method of Test for Uncompacted Void Content of Fine Aggregate
T 304-2011 Standard Method of Test for Uncompacted Void Content of Fine Aggregate
T 279-1996 Standard Method of Test for Accelerated Polishing of Aggregates Using the British Wheel
T 279-2018 Standard Method of Test for Accelerated Polishing of Aggregates Using the British Wheel
T 279-2012 Standard Method of Test for Accelerated Polishing of Aggregates Using the British Wheel
T264-1978 Standard Method of Test for Collection and Preservation of Water Samples (Eighteenth Edition)
TP 61-2002 Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate
T 335-2009 Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate

KR-KS, Calibration set Test set

KS M ISO 3810-2020 Floor tiles of agglomerated cork — Methods of test
KS B ISO 9806-2016 Solar energy — Solar thermal collectors — Test methods
KS F 2507-2022 Test method for soundness of aggregates by use of sodium sulfate
KS P ISO 8670-2-2018 Ostomy collection bags — Part 2: Requirements and test methods
KS C IEC 62670-1-2016 Photovolatic concentrators(CPV) ― Performance testing ― Part 1: Standard conditions

Anhui Provincial Standard of the People's Republic of China, Calibration set Test set

DB34/T 3609-2020 Technical Specifications for Children's Speech Test Set

Institute of Electrical and Electronics Engineers (IEEE), Calibration set Test set

IEEE Std C57.98-1993 Guide for Transformer Impulse Tests Corrections January 16, 1998
NFPA (Fire) 3HB15 Commissioning and Integrated System Testing Handbook, 2015 Edition
NFPA (Fire) 3HB12 Commissioning and Integrated System Testing Handbook, 2012 Edition
IEEE 1838-2019 IEEE Standard for Test Access Architecture for Three-Dimensional Stacked Integrated Circuits
IEEE Std 1838-2019 IEEE Standard for Test Access Architecture for Three-Dimensional Stacked Integrated Circuits

RU-GOST R, Calibration set Test set

GOST R 50697-1994 Series 1 freight containers. Specification and testing. Part 2. Thermal containers
GOST R 53520-2009 Series 1 freight containers - Specification and testig. Part 4. Non-pressurized containers for dry bulk
GOST R 51876-2008 Series 1 freight containers. Technical requirements and test methods. Part 1. General-purpose containers
GOST R 51876-2002 Series 1 freight containers. Technical requirements and test methods. Part 1. General purpose containers
GOST R 51708-2001 Centrifugal dust collectors. Safety requirement and methods of testing
GOST 31826-2012 Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing

Professional Standard - Agriculture, Calibration set Test set

100兽药典三部-2015 Main text table of contents diagnostic products brucellosis tiger red plate agglutination test antigen
102兽药典三部-2015 Text Contents Diagnostic Products Brucellosis Test Tube Agglutination Test Antigen, Positive Serum and Negative Serum
131兽药典三部-2015 Text Contents Diagnostic Products Trypanosomiasis Agglutination Test Antigen, Positive Serum and Negative Serum
123兽药典三部-2015 Text Table of Contents Diagnostic Products Agglutination Test Antigen, Positive Serum and Negative Serum for Schistosomiasis japonicum

SE-SIS, Calibration set Test set

SIS SMS 2844-1975 Dust separating. Test dust for dust collectors
SIS SMS 2843-1975 Dust separating. Test method for dynamic dust collectors
SIS SS 84 40 17-1986 Flexible intermediate bulk containers -Compression resistance test
SIS SS 84 40 18-1986 Flexible intermediate bulk containers -UV-resistance test

Professional Standard - Postal Service, Calibration set Test set

YZ/T 0080-2002 Test procedures for postal portable data acquisitor

US-General Services, Calibration set Test set

General Services FED-STD-834-2007 PERFORMANCE TEST METHOD FOR INTENSIVE USE CHAIRS

Professional Standard - Hygiene , Calibration set Test set

WS 375.14-2016 Disease Control Essential Data Set Part 14: School Absenteeism Surveillance Report
WS 375.14-2015 Disease Control Essential Data Set Part 14: School Absenteeism Surveillance Report

Military Standard of the People's Republic of China-General Armament Department, Calibration set Test set

GJB 5540-2006 General specification for test program sets of aviation automatic test system
GJB 9888-2020 Lithium niobate integrated optical device test method
GJB 4297-2001 Wind tunnel force measurement, pressure measurement and thermal test information collection requirements
GJB/Z 67-1994 Missile Flight Test External Test Data Collection Guide
GJB 383.6A-1997 Telemetry system and subsystem test methods Diversity synthesizer test methods
GJB 5938-2007 General requirementof test program set for military electronic equipment
GJB 5206-2004 Missile flight test external test data collection and processing
GJB 383.6-1987 Telemetry system and subsystem test methods Diversity synthesizer test methods
GJB 9489-2018 Military Server/Desktop Computer Integration Test Requirements
GJB 9147-2017 Semiconductor integrated circuit operational amplifier test methods

Professional Standard - Aerospace, Calibration set Test set

QJ 259-1977 器件
QJ 257-1977 Semiconductor TTL Integrated Digital Circuit Testing Method
QJ 1528-1988 Semiconductor integrated circuit time base test method
QJ/Z 32-1977 Testing methods for semi-conductor integrated comparison amplifiers
QJ 260-1977 器件
QJ/Z 33-1977 Field effect digital integration (P-MOS) circuit test method
QJ 1460-1988 Test method for broadband amplifier of semiconductor integrated circuit
QJ 2491-1993 Test methods for operational amplifiers in semiconductor integrated circuits
QJ 2017A-1998 Satellite assembly, test quality information collection card and filling specifications

Group Standards of the People's Republic of China, Calibration set Test set

T/ZSA 40-2020 Requirements of Simulation Scenario Set for Automated Driving Vehicle
T/SCA 006-2019 General test specification for intelligent terminal of container
T/CAS 337-2019 Collection performance test and evaluation of range hood
T/CMAX 21002-2020 Automated driving simulation test scenario set requirements
T/HZBX 050-2022 Integrated Test Specification of Networked Collaborative Manufacturing System
T/CIET 18-2023 Motor no-load data automatic collection test equipment
T/CPSS 1006-2018 Integrated test specification for high power conversion system in fusion device
T/CMAX 43001-2019 Data Collection Requirements for Road Tests of Autonomous Driving Vehicles
T/HBAS 026-2021 Communication protocol for data acquisition and testing of power transmission and transformation equipment

ES-UNE, Calibration set Test set

UNE-EN ISO 9806:2020 Solar energy - Solar thermal collectors - Test methods (ISO 9806:2017)
UNE 146513:2018 Test for aggregates. Determination of the potential reactivity of aggregates. Chemical method. Determination of the alkali-carbonate reactivity.
UNE-ETS 300394-2-1 Ed1:2006 Terrestrial Trunked Radio (TETRA). Conformance testing specification; Part 2: Protocol testing specification for Voice plus Data (V+D); Sub-part 1: Test suite structure and test purposes (Endorsed by AENOR in November of 2006.)
UNE 146512:2018 Test for aggregates. Determination of the potential reactivity of aggregates. Chemical method. Determination of the reactivity alkali-silica and alkali-silicate.
UNE-EN 50483-6:2009 Test requirements for low voltage aerial bundled cable accessories -- Part 6: Environmental testing (Endorsed by AENOR in April of 2011.)

工业和信息化部, Calibration set Test set

YD/T 3494-2019 Centralized remote data backup testing requirements
YD/T 2929-2015 Router Equipment Test Method Cluster Router
YD/T 3791-2020 Broadband trunking communication (B-TrunC) system (second phase) interface test method based on LTE technology Interface between cluster base station and cluster core network
SJ/T 10805-2018 Semiconductor integrated circuit voltage comparator test method
SJ/T 11702-2018 Semiconductor integrated circuit serial peripheral interface test method

未注明发布机构, Calibration set Test set

BS 3951-2.4:1992 L - - = I Freight containers Part 2 . Specificationand testing of series 1freight containers Section 2.4Non - pressurizedcontainers for dry bulk
BS 3951-2.6:1992 Freight containers Part 2 . Specificationand testing of series 1freight containers Section 2.6 Interface connections for tank containers
BS 3951-2.5:1992(2000) Freight containers — Part 2 : Specification and testing of series 1 freight containers — Section 2.5 Platform and platform - based containers
BS 3951-2.1:1991+A5:2006(2010) Freight containers — Part 2 : Specification and testing of series 1 freight containers — Section 2.1 General cargo containers for general purposes
BS 812-109:1990(2011) Testing aggregates — Part 109 : Methods for determination of moisture content
DIN EN 1501-4 E:2023 Refuse collection vehicles – General requirements and safety requirements – Part 4: Noise test code for refuse collection vehicles

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Calibration set Test set

ASHRAE 93-2010 Methods of Testing to Determine the Thermal Performance of Solar Collectors
ASHRAE 93-2010 (RA 2014) Methods of Testing to Determine the Thermal Performance of Solar Collectors
ASHRAE 93 ERTA-2014 Methods of Testing to Determine the Thermal Performance of Solar Collectors

National Metrological Verification Regulations of the People's Republic of China, Calibration set Test set

JJG(电子) 04021-1989 Specification for verification of BJ3110 model MOS integrated circuit testers
JJG(电子) 04042-1991 Verification regulations for GH3111/3111G integrated circuit tester
JJG 1015-2006 Verification Regulation of General Digital Integrated Circuit Testing System
JJG(电子) 04032-1989 BJ3122 (QL11) logic integrated circuit tester verification regulations
JJG(电子) 04034-1989 GR1731M type analog integrated circuit test system verification regulations
JJG(电子) 31012-2007 Verification Regulations for Integrated Operational Amplifier Parameter Tester
JJG(电子) 04028-1989 Verification regulations of BJ3190 integrated operational amplifier tester
JJG(电子) 04035-1989 GR1732M digital integrated circuit test system verification regulations
JJG(电子) 04029-1989 J273B type linear integrated circuit test system verification regulations
JJG(电子) 04031-1989 9200 Large-Scale Integrated Circuit Test System Verification Regulations
JJG(电子) 04027-1989 1600 Type Integrated Circuit DC Parameter Test System Verification Regulations
JJG(电子) 04033-1989 BJ3123 type bipolar logic integrated circuit tester verification regulations
JJG(船舶) 22-1998 SID Large-Scale Digital Integrated Circuit Test System Verification Regulations
JJG(电子) 04041-1991 BJ3192 type integrated operational amplifier automatic tester verification regulations

SAE - SAE International, Calibration set Test set

SAE J855-1987 Test Method of Stretch and Set of Textiles and Plastics@ Standard; (March 1987)
SAE J855-1985 Test Method of Stretch and Set of Textiles and Plastics

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Calibration set Test set

JEDEC JESD47G.01-2010 Stress-Test-Driven Qualification of Integrated Circuits
JEDEC JESD47H-2011 Stress-Test-Driven Qualification of Integrated Circuits
JEDEC JESD47I-2012 Stress-Test-Driven Qualification of Integrated Circuits
JEDEC JESD51-8-1999 Integrated Circuit Thermal Test Method Environmental Conditions - Junction-to-Board

International Telecommunication Union (ITU), Calibration set Test set

ITU-T Q.921 BIS-1993 Abstract Test Suite for LAPD Conformance Testing (Study Group XI) 13 pp

Military Standards (MIL-STD), Calibration set Test set

DOD A-A-53787-1988 COLLECTING TUBING SET, UTERINE, PLASTIC, DISPOSABLE

VN-TCVN, Calibration set Test set

TCVN 7572-20-2006 Aggregates for concrete and mortar.Test methods.Part 20: Determination of mica content in fine aggregate
TCVN 7572-8-2006 Aggregates for concrete and mortar.Test methods.Part 8: Method for determination of content of dust, mud and clay in aggregate and content of clay lumps in fine aggregate
TCVN 7572-13-2006 Aggregates for concrete and mortar.Test methods.Part 13: Determination of elongation and flakiness index of coarse aggregate

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Calibration set Test set

GB/T 14028-2018 Semiconductor integrated circuits—Measuring method of analogue switch
GB/T 35006-2018 Semiconductor integrated circuits—Measuring method of level converter

Professional Standard - Public Safety Standards, Calibration set Test set

GA 657-2006 Detection method for ABO blood type in human body fluid stains. Hemagglutination inhibition test
GA/T 866-2010 Technical specification for fingerprint and palm print live scan device test
GA/T 1367-2017 Functional test method of police digital trunking (PDT) communication system

Inner Mongolia Provincial Standard of the People's Republic of China, Calibration set Test set

DB15/T 2888-2023 Aggregate Morphological Characteristics Testing and Evaluation Technical Regulations

能源部, Calibration set Test set

SY 5269-1991 Test method for thermal energy utilization of crude oil gathering and transportation system

ETSI - European Telecommunications Standards Institute, Calibration set Test set

TR 102 422-2005 Methods for Testing and Specification (MTS) IMS Network Integration Testing Infrastructure Testing Methodology (V1.1.1)

Lithuanian Standards Office , Calibration set Test set

LST EN 933-10-2009 Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving)

Professional Standard - Aviation, Calibration set Test set

HB 7784-2005 General technical requirement of test program set for aircraft ground automatic test equipment

International Electrotechnical Commission (IEC), Calibration set Test set

IEC 62670-2:2015 Photovoltaic concentrators (CPV) - Performance testing - Part 2: Energy measurement

GOSTR, Calibration set Test set

GOST R ISO 8669-2-2019 Urine collection bags. Part 2. Requirements and test methods
GOST R ISO 16391-2019 Aids for ostomy and incontinence. Irrigation sets. Requirements and test methods

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Calibration set Test set

ASHRAE 93 ERTA-2013 Methods of Testing to Determine the Thermal Performance of Solar Collectors
ASHRAE 3625-1993 Technique for Evaluating Steady-State Conditions in Flat-Plate Solar Collector Testing
ASHRAE 93-1986 Methods of Testing to Determine the Thermal Performance of Solar Collectors (R 1991)

CEN - European Committee for Standardization, Calibration set Test set

EN 12079:2006 Offshore Containers - Design@ Construction@ Testing@ Inspection and Marking

Xinjiang Provincial Standard of the People's Republic of China, Calibration set Test set

DB65/T 4003-2017 Specifications for Data Acquisition of Highway Engineering Testing and Testing Equipment

Professional Standard - Post and Telecommunication, Calibration set Test set

YD/T 4376-2023

FI-SFS, Calibration set Test set

SFS 5254-1986 Denna standard ?r fastst?lld p? svenska
SFS 5259-1986 Denna standard ?r fastst?lld p? svenska

Professional Standard - Commodity Inspection, Calibration set Test set

SN/T 1222-2003 Detection of antibodies against(pullorum disease)-Protocol of whole blood plate agglutination test
SN/T 1226-2003 Detetction antibodies against fowl pox virus-Protocol of hemagglutination inhibition test

Professional Standard - Petroleum, Calibration set Test set

SY/T 5264-1996 Efficiency test and unit energy consumption calculation method of crude oil gathering system

TIA - Telecommunications Industry Association, Calibration set Test set

TSB-102.CBBJ-C-2015 Project 25 Recommended Compliance Assessment Tests- Trunking Operation

(U.S.) Telecommunications Industries Association , Calibration set Test set

TIA TSB-102.CBBJ-C-2015 Project 25 Recommended Compliance Assessment Tests- Trunking Operation

Association of German Mechanical Engineers, Calibration set Test set

VDI 6010 Blatt 3-2015 Technical safety installations for buildings - Integrated system test and system interaction test

HU-MSZT, Calibration set Test set

MSZ 18287/2-1983

PT-IPQ, Calibration set Test set

NP EN 932-1-2002 Tests for general properties of aggregates Part 1:Methods for sampling