ZH
RU
ES

Microgram mass measurement method and principle

Microgram mass measurement method and principle, Total:426 items.

In the international standard classification, Microgram mass measurement method and principle involves: Bearings, Thermodynamics and temperature measurements, Metrology and measurement in general, Quality, Agricultural machines, implements and equipment, Test conditions and procedures in general, Soil quality. Pedology, Earth-moving machinery, Particle size analysis. Sieving, Document imaging applications, Air quality, Measurement of fluid flow, Occupational safety. Industrial hygiene, Petroleum products in general, Animal feeding stuffs, Radiation measurements, Nuclear energy engineering, Electromagnetic compatibility (EMC), Products of the chemical industry, Milk and milk products, Vocabularies, Fuels, Products of the textile industry, Clothes, Protection of and in buildings, Non-ferrous metals, Conducting materials, Semiconducting materials, Refractories, Technical product documentation, Microbiology, Earthworks. Excavations. Foundation construction. Underground works, Powder metallurgy, Petroleum, petroleum products and natural gas handling equipment, General methods of tests and analysis for food products, Testing of metals, Analytical chemistry, Ergonomics, Company organization and management, Applications of information technology, Products of non-ferrous metals, Surface treatment and coating, Organic chemicals, Inorganic chemicals, Water quality, Ferroalloys, Farming and forestry, Paper and board, Rubber, Pharmaceutics, Veterinary medicine, Measurement of volume, mass, density, viscosity, Piezoelectric and dielectric devices, Components and accessories for telecommunications equipment, Dentistry, Radiocommunications, Paints and varnishes, Power stations in general, Electrical wires and cables, Wastes, Cork and cork products, Insulating materials, Electricity. Magnetism. Electrical and magnetic measurements, Wood, sawlogs and sawn timber, Biology. Botany. Zoology, Capacitors, Environmental protection, Paint ingredients, Metalliferous minerals, Construction materials.


British Standards Institution (BSI), Microgram mass measurement method and principle

  • BS ISO 1132-2:2001 Rolling bearings. Tolerances - Measuring and gauging principles and methods
  • BS EN 14049:2003(2011) Water application intensity - Calculation principles and measurement methods
  • BS EN 14049:2003 Water application intensity - Calculation principles and measurement methods
  • BS ISO 1132-2:2002 Rolling bearings. Tolerances. Measuring and gauging principles and methods
  • BS ISO 11698-2:2000 Micrographics. Methods of measuring image quality produced by aperture card scanners - Quality criteria and control
  • BS ISO 11698-2:2001 Micrographics - Methods of measuring image quality produced by aperture card scanners - Quality criteria and control
  • DD CEN/TS 15279:2006 Workplace exposure — Measurement of dermal exposure — Principles and methods
  • BS 7755-5.2:1996 Soil quality. Physical methods. Determination of water content in the unsaturated zone. Neutron depth probe method
  • PD ISO/TS 17073:2013 Soil quality. Determination of trace elements in aqua regia and nitric acid digests. Graphite furnace atomic absorption spectrometry method (GFAAS)
  • BS 874-1:1986 Methods for determining thermal insulating properties - Introduction, definitions and principles of measurement
  • BS EN 12938:2000 Methods for the analysis of pewter. Determination of alloying and impurity element contents by atomic spectrometry
  • BS EN 12938:2000(2001) Methods for the analysis of pewter. Determination of alloying and impurity element contents by atomic spectrometry
  • BS EN ISO 15216-1:2017 Microbiology of the food chain. Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR. Method for quantification
  • BS 6043-2.3:1997 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of trace elements in green and calcined coke by flame atomic absorption spectroscopy
  • BS EN ISO 10075-3:2004 Ergonomic principles related to mental workload - Principles and requirements concerning methods for measuring and assessing mental workload
  • BS EN 13615:2001(2002) Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry
  • BS 6068-2.29:1987 Water quality - Physical, chemical and biochemical methods - Determination of cobalt, nickel, copper, zinc, cadmium and lead: flame atomic absorption spectrometric methods
  • BS 6068-2.34:1988 Water quality - Physical, chemical and biochemical methods - Method for the determination of the chemical oxygen demand
  • BS 6068-2.17:1986 Water quality - Physical, chemical and biochemical methods - Methods for determination of total cyanide
  • BS 6068 Sec.2.34:1988 Water quality. Physical, chemical and biochemical methods. Method for the determination of the chemical oxygen demand
  • PD CEN ISO/TS 29843-1:2014 Soil quality. Determination of soil microbial diversity. Method by phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (PLEL) analysis
  • BS 6068-2.33:1987 British Standard Water quality - Part 2. Physical, chemical and biochemical methods - Section 2.33 Method for the determination of ammonium: automated spectrometric method
  • BS EN ISO 15151:2020 Milk, milk products, infant formula and adult nutritionals. Determination of minerals and trace elements. Inductively coupled plasma atomic emission spectrometry (ICP-AES) method
  • BS ISO 21222:2020 Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
  • BS EN 13615:2001 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry
  • BS EN 13615:2002 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry
  • BS ISO 19984-1:2017 Rubber and rubber products. Determination of biobased content. General principles and calculation methods using the formulation of the rubber compound
  • BS 6068-2.18:1986 Water quality - Physical, chemical and biochemical methods - Methods for the determination of easily liberatable cyanide
  • 19/30351707 DC BS ISO 21222. Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
  • 18/30340676 DC BS EN ISO 22475-1. Geotechnical investigation and testing. Sampling methods and groundwater measurements. Part 1. Technical principles for execution
  • BS EN 61338-1-3:2000 Waveguide type dielectric resonators.. General information and test conditions. Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency
  • BS 6068-2.31:1987 Water quality - Physical, chemical and biochemical methods - Method for determination of manganese: formaldoxime spectrometric method
  • DD ISO/TS 11080:2009 Dentistry. Essential characteristics of test methods for the evaluation of treatment methods intended to improve or maintain the microbiological quality of dental unit procedural water
  • BS EN ISO 21424:2020 Milk, milk products, infant formula and adult nutritionals. Determination of minerals and trace elements. Inductively coupled plasma mass spectrometry (ICP-MS) method
  • BS 6829-5.1:1990 Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulphates. Method for determination of total active matter content
  • BS EN ISO 17616:2022 Soil quality. Guidance on the choice and evaluation of bioassays for ecotoxicological characterization of soils and soil materials
  • BS DD ISO/TS 29843-1:2010 Soil quality. Determination of soil microbial diversity. Method by phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (PLEL) analysis
  • BS EN ISO 11127-6:1994 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Determination of water-soluble contaminants by conductivity measurement
  • BS EN ISO 11127-6:2011 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of water-soluble contaminants by conductivity measurement
  • BS 7755-3.13:1998 Soil quality. Chemical methods. Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc in aqua regia extracts of soil. Flame and electrothermal atomic absorption spectrometric methods
  • BS 6829-4.2:1989 Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of polyethylene glycols and non-ionic active matter contents
  • BS 6068-2.39:1991 Water quality - Physical, chemical and biochemical methods - Method for the determination of sulphate using barium chloride and gravimetry
  • BS EN ISO 3233-2:2014 Paints and varnishes. Determination of the percentage volume of non-volatile matter. Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes pr
  • BS 9070 Secs.1 & 2:1969 Specification for fixed capacitors of assessed quality: generic data and methods of test. Principles and mandatory procedures. General rules for drafting detail specifications
  • 18/30370871 DC BS EN ISO 20776-1. Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices. Part 1. Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against r...
  • BS 6829 Sec.5.1:1990 Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulphates. Method for determination of total active matter content
  • BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
  • 22/30437642 DC BS EN ISO 4484-3. Textiles and textile products. Microplastics from textile sources. Part 3. Measurement of collected material mass released from textile end products by domestic washing method

GB-REG, Microgram mass measurement method and principle

Association Francaise de Normalisation, Microgram mass measurement method and principle

  • NF EN 14049:2004 Intensité d'apport d'eau - Principes de calcul et méthodes de mesure
  • NF EN ISO 22475-1:2021 Reconnaissance et essais géotechniques - Méthodes de prélèvement et mesurages piézométriques - Partie 1 : principes techniques pour le prélèvement des sols, des roches et des eaux souterraines
  • NF U51-470*NF EN 14049:2004 Water application intensity - Calculation principles and measurement methods
  • NF X31-501:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente d'un échantillon de sol non remanié - Méthode du cylindre.
  • NF X31-504:1995 Qualité des sols - Méthode de mesurage de la conductivité hydraulique horizontale équivalente et de la porosité de drainage in situ - Méthode de Guyon.
  • NF X31-505:1992 Soil quality - Physical methods - Method for determining the bulk volume and the water content of lumps of earth
  • NF U51-470/A1*NF EN 14049/A1:2006 Irrigation techniques - Water application intensity - Calculation principles and measurement methods
  • FD ISO/TR 14294:2011 Air des lieux de travail - Mesurage de l'exposition cutanée - Principes et méthodes
  • NF EN 14049/A1:2006 Techniques d'irrigation - Intensité d'apport d'eau - Principes de calcul et méthodes de mesure
  • NF ISO 1132-2:2002 Roulements - Tolérances - Partie 2 : principes et méthodes de mesurage et de vérification par calibre
  • FD X43-248*FD ISO/TR 14294:2011 Workplace atmospheres - Measurement of dermal exposure - Principles and methods
  • NF E22-337-2*NF ISO 1132-2:2002 Rolling bearings - Tolerances - Part 2 : measuring and gauging principles and methods
  • NF EN 13615:2002 Méthodes pour l'analyse des lingots d'étain - Détermination des teneurs en impuretés dans l'étain de qualité 99,90 % et 99,85 % par spectrométrie atomique
  • NF X06-041-1*NF ISO 5725-1:1994 Application of statistics. Accuracy (trueness and precision) of measurement methods and results. Part 1 : general principles and definitions.
  • NF EN ISO 15151:2020 Lait, produits laitiers, formules infantiles et produits nutritionnels pour adultes - Détermination de la teneur en minéraux et en oligo-éléments - Méthode par spectrométrie d'émission atomique avec plasma induit par haute fréquence (ICP-AES)
  • NF EN ISO 21187:2021 Lait - Mesure quantitative de la qualité microbiologique - Lignes directrices pour établir et vérifier une relation de conversion entre les résultats de la méthode alternatif et les résultats de la méthode d'ancrage
  • NF P94-105:2012 Sols : reconnaissance et essais - Contrôle de la qualité du compactage - Méthode au pénétromètre dynamique à énergie variable - Principe et méthode d'étalonnage du pénétromètre - Exploitation des résultats - Interprétation
  • NF EN ISO 3868:1995 Revêtements métalliques et autres revêtements non organiques - Mesurage de l'épaisseur - Méthode basée sur le principe de Fizeau d'interférométrie à faisceaux multiples.
  • NF EN ISO 10075-3:2005 Principes ergonomiques relatifs à la charge de travail mental - Partie 3 : principes et exigences concernant les méthodes de mesure et d'évaluation de la charge de travail mental
  • NF EN 12938:2000 Méthodes d'analyse de l'étain pour la fabrication d'objets - Détermination de la teneur en alliages et en impuretés par spectrométrie atomique
  • NF V08-670-1*NF EN ISO 15216-1:2017 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1 : method for quantification
  • NF V04-055*NF EN ISO 21187:2021 Milk - Quantitative determination of microbiological quality - Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results
  • NF EN ISO 14891:2003 Lait et produits laitiers - Détermination de la teneur en azote - Méthode pratique par combustion selon le principe de Dumas
  • NF A06-903*NF EN 13615:2002 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry.
  • NF A06-902*NF EN 12938:2000 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry.
  • NF V04-445*NF EN ISO 15151:2020 Milk, milk products, infant formula and adult nutritionals - Determination of minerals and trace elements - Inductively coupled plasma atomic emission spectrometry (ICP-AES) method
  • NF X35-300-3*NF EN ISO 10075-3:2005 Ergonomic principles related to mental workload - Part 3 : principles and requirements concerning methods for measuring and assessing mental workload.
  • NF EN ISO 21424:2020 Lait, produits laitiers, formules infantiles et produits nutritionnels pour adultes - Détermination de la teneur en minéraux et en oligo-éléments - Méthode par spectrométrie de masse avec plasma à couplage inductif (ICP-SM)
  • NF EN 16171:2016 Boues, bio-déchets traités et sols - Détermination des éléments en traces par spectrométrie de masse avec plasma induit par haute fréquence (ICP-MS)
  • XP P41-250-2:2001 Effet des matériaux sur la qualité des eaux destinées à la consommation humaine - Matériaux organiques - Partie 2 : méthode de mesure des micropolluants minéraux et organiques
  • NF P94-063:2011 Sols : reconnaissance et essais - Contrôle de la qualité du compactage - Méthode au pénétromètre dynamique à énergie constante - Principe et méthode d'étalonnage des pénétrodensitographes - Exploitation des résultats - Interprétation
  • NF V04-448*NF EN ISO 21424:2020 Milk, milk products, infant formula and adult nutritionals - Determination of minerals and trace elements - Inductively coupled plasma mass spectrometry (ICP-MS) method
  • XP CEN ISO/TS 29843-1:2014 Qualité du sol - Détermination de la diversité microbienne du sol - Partie 1 : méthode par analyse des acides gras phospholipidiques (PLFA) et par analyse des lipides éther phospholipidiques (PLEL)
  • XP P41-250-1:2001 Effects of materials on the quality of water intended for human consumption - Organic materials - Part 1 : measurement method for the organoleptic and physico-chemical parameters
  • FD X31-611-2:1999 Qualité du sol - Méthodes de détection et de caractérisation des pollutions - Partie 2 : guide général pour l'utilisation de méthodes géophysiques en criblage de terrain
  • FD T90-465-1:2014 Water quality - Protocol for the estimation of the uncertainty of measurement associated with an analysis result for microbiological enumeration methods - Part 1 : references, definition and general principles
  • NF C96-627-1-5*NF EN 61338-1-5:2015 Waveguide type dielectric resonators - Part 1-5 : general information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency
  • UTE C26-295U-1999 Measurement of microwave permittivity and permeability of homogeneous and lossy isotropic materials. Method of measurement for circular coaxial guide.
  • NF EN ISO 4484-3:2023 Textiles et produits textiles - Microplastiques d'origines textiles - Partie 3 : mesurage de la masse de matériaux collectés libérés par les produits finis textiles par la méthode de lavage domestique
  • NF EN ISO 11929-3:2021 Détermination des limites caractéristiques (seuil de décision, limite de détection et extrémités de l'intervalle élargi) pour mesurages de rayonnements ionisants - Principes fondamentaux et applications - Partie 3 : applications aux méthodes d...
  • NF ISO 14256-2:2007 Qualité du sol - Dosage des nitrates, des nitrites et de l'ammonium dans des sols bruts par extraction avec une solution de chlorure de potassium - Partie 2 : méthode automatisée avec analyse en flux segmenté
  • NF T30-141-2:2014 Paints and varnishes - Determination of the percentage volume of non-volatile matter Part 2 : method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of the dry-film density on coated test panels by the
  • NF EN 16294:2013 Produits pétroliers et produits dérivés des corps gras - Détermination de la teneur en phosphore des esters méthyliques d'acides gras (EMAG) - Méthode par spectrométrie d'émission atomique par plasma à couplage inductif (ICP OES)
  • NF EN 14243-2:2019 Matériaux produits à partir de pneus usagés non réutilisables (PUNR) - Partie 2 : granulats et poudrettes - Méthodes de détermination de la distribution granulométrique et des impuretés, y compris la teneur en fils métalliques et en fibres tex...
  • NF C96-627-1-3*NF EN 61338-1-3:2000 Waveguide type dielectric resonators - Part 1-3 : general information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency.

Association of German Mechanical Engineers, Microgram mass measurement method and principle

  • VDI/VDE 3511 Blatt 1-1996 Temperature measurement in industry - Principles and special methods of temperature measurement
  • VDI 3491 Blatt 1-2016 Measurement of particles - Methods for generating test aerosols - Principles and overview
  • VDI 4205 Blatt 1-2003 Measurement and test methods for the assessment of vapour recovery systems on filling stations - Fundamentals
  • VDI 4331 Blatt 2-2013 Monitoring the effects of genetically modified organisms (GMOs) - Method for extracting nucleic acids from soil for the analysis of microbial communities and detection of transgenic DNA - Quality requirements and applications

Korean Agency for Technology and Standards (KATS), Microgram mass measurement method and principle

  • KS Q ISO 10012:2004 Quality management systems－Requirements for measurement processes and measuring equipment
  • KS F ISO 6016:2003 Earth－moving machinery－Methods of measuring the masses of whole machines, their equipment and components
  • KS A ISO 5725-1:2012 Accuracy(trueness and precision) of measurement methods and results-Part 1:General principles and definitions
  • KS X ISO 11698-2-2007(2012) Micrographics－Methods of measuring image quality produced by aperture card scanners－Part 2：Quality criteria and control
  • KS X ISO 11698-2:2007 Micrographics-Methods of measuring image quality produced by aperture card scanners-Part 2:Quality criteria and control
  • KS X ISO 11698-2:2013 Micrographics－Methods of measuring image quality produced by aperture card scanners－Part 2：Quality criteria and control
  • KS D ISO 7627-2:2012 Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 2：Determination of calcium, potassium, magnesium and sodium in contents from 0.001 % to 0.02 % (mass fraction)
  • KS D ISO 7627-3:2012 Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 3：Determination of cobalt, iron, manganese and nickel in contents from 0.01 to 0.5 % (mass fraction)
  • KS D ISO 7627-4:2012 Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 4：Determination of molybdenum, titanium and vanadium in contents from 0.01 to 0.5 % (mass fraction)
  • KS X ISO/IEC 19796-3:2011 Information technology-Learning, education and training-Quality management, assurance and metrics-Part 3:Reference methods and metrics
  • KS D ISO 7627-5:2012 Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 5：Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0.5 to 2 % (mass fraction)
  • KS A ISO 5725-1-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 1：General principles and definitions
  • KS X ISO/IEC 19796-1:2009 Information technology-Learning, education and training-Quality management, assurance and metrics-Part 1:General approach
  • KS M ISO 3233-2:2021 Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 2: Method using the determination of non-volatile-matter content in accordance with KS M ISO 3251 and determ
  • KS M ISO 3233-2:2016 Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 2: Method using the determination onon-volatile-matter content in accordance with ISO 3251 andfdetermination of dry film density on coated test panels by the Arch
  • KS C IEC 61338-1-5:2019 Waveguide type dielectric resonators — Part 1-5: General information and test conditions — Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave
  • KS Q ISO 16355-1:2018 Application of statistical and related methods to new technology and product development process — Part 1: General principles and perspectives of Quality Function Deployment(QFD
  • KS C IEC 61338-1-3:2018 Waveguide type dielectric resonators ― Part 1-3: General information and test conditions ― Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency
  • KS C IEC 61338-1-3-2023 Waveguide type dielectric resonators Part 1-3: General information and test conditions Method for measurement of complex relative permittivity of dielectric resonator materials at microwave frequencies
  • KS M 1992-2008(2018) Child use and care articles－Methods for determining the release of N-Nitrosamines and N-Nitrosatable substances from elastomer or rubber teats and soothers

Danish Standards Foundation, Microgram mass measurement method and principle

  • DS/EN 14049:2004 Water application intensity - Calculation principles and measurement methods
  • DS/EN 14049/A1:2005 Irrigation techniques - Water application intensity - Calculation principles and measurement methods
  • DS/CEN/TS 15279:2006 Workplace exposure – Measurement of dermal exposure – Principles and methods
  • DS/EN 12938/AC:2001 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry
  • DS/EN 12938:2001 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry
  • DS/CEN/TS 15633-2:2013 Foodstuffs - Detection of food allergens by immunological methods - Part 2: Quantitative determination of hazelnut with an enzyme immunoassay using monoclonal antibodies and bicinchoninic acid-protein detection
  • DS/EN 13615/AC:2003 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90% and 99,85% by atomic spectrometry
  • DS/EN 13615:2002 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90% and 99,85% by atomic spectrometry
  • DS/ISO 21187:2021 Milk – Quantitative determination of microbiological quality – Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results
  • DS/EN ISO 21187:2021 Milk – Quantitative determination of microbiological quality – Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results (ISO 21187:2021)
  • DS/EN ISO 14891:2002 Milk and milk products - Determination of nitrogen content - Routine method using combustion according to the Dumas principle
  • DS/CEN/TS 15633-3:2012 Foodstuffs - Detection of food allergens by immunological methods - Part 3: Quantitative determination of hazelnut with an enzyme immunoassay using polyclonal antibodies and Lowry protein detection
  • DS/EN ISO 10075-3:2004 Ergonomic principles related to mental workload - Part 3: Principles and requirements concerning methods for measuring and assessing mental workload
  • DS/ISO/TS 29843-1:2011 Soil quality - Determination of soil microbial diversity - Part 1: Method by phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (PLEL) analysis
  • DS/EN 61338-1-3:2000 Waveguide type dielectric resonators - Part 1-3: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency

Lithuanian Standards Office , Microgram mass measurement method and principle

  • LST EN 14049-2004 Water application intensity - Calculation principles and measurement methods
  • LST EN 14049-2004/A1-2005 Irrigation techniques - Water application intensity - Calculation principles and measurement methods
  • LST EN 12938-2000 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry
  • LST EN 12938-2000/AC-2003 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry
  • LST EN 13615-2002 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry
  • LST EN 13615-2002/AC-2003 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry
  • LST EN ISO 21187:2021 Milk - Quantitative determination of microbiological quality - Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results (ISO 21187:2021)
  • LST EN ISO 14891:2003 Milk and milk products - Determination of nitrogen content - Routine method using combustion according to the Dumas principle (ISO 14891:2002)
  • LST EN ISO 10075-3:2004 Ergonomic principles related to mental workload - Part 3: Principles and requirements concerning methods for measuring and assessing mental workload (ISO 10075-3:2004)

AENOR, Microgram mass measurement method and principle

  • UNE-EN 14049:2005 Water application intensity - Calculation principles and measurement methods
  • UNE-EN 14049:2005/1M:2006 Irrigation techniques - Water application intensity - Calculation principles and measurement methods
  • UNE 104281-0-4:1987 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. NON BITUMINOUS RAW MATERIALS. TESTING METHODS. MEDIA MASS AND THICKNESS
  • UNE 135352:2006 Vertical signs and road delineators. "In situ" quality control. Characteristics and test methods.
  • UNE 64013:1971 MIXED FEEDS AND RAW MATERIALS. QUANTITATIVE DETERMINATION OF HUMIDITY AND VOLATILE MATTER. PREVIOUS DISSECATION METHOD.
  • UNE-CEN/TS 15633-3:2013 EX Foodstuffs - Detection of food allergens by immunological methods - Part 3: Quantitative determination of hazelnut with an enzyme immunoassay using polyclonal antibodies and Lowry protein detection
  • UNE-EN ISO 15216-1:2017 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1: Method for quantification (ISO 15216-1:2017)
  • UNE-EN ISO 14891:2002 Milk and milk products - Determination of nitrogen content - Routine method using combustion according to the Dumas principle. (ISO 14891:2002)
  • UNE-EN ISO 10075-3:2005 Ergonomic principles related to mental workload - Part 3: Principles and requirements concerning methods for measuring and assessing mental workload (ISO 10075-3:2004)

Group Standards of the People's Republic of China, Microgram mass measurement method and principle

  • T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
  • T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle
  • T/IAWBS 012-2019 Test Method for Surface Quality and Micropipe?Density?of Silicon Carbide?Single Crystal?Polishing Wafers——Confocal and Differential Interferometry Optics
  • T/CIET 245-2023 Quality requirement and test method of β-nicotinamide adenine dinucleotide (reduced)
  • T/IAWBS 010-2019 Detection method for measuring the surface Detection method for measuring the surface quality and micropipe densityof polished monocrystalline silicon carbide wafers-Laser Scattering Method

German Institute for Standardization, Microgram mass measurement method and principle

  • DIN 19745:2006-10 Soil quality - Principles of the determination of the water content by Time Domain Reflectometry (TDR) and Time Domain Transmissometry (TDT)
  • DIN EN 14049:2006 Irrigation techniques - Water application intensity - Calculation principles and measurement methods; English version of DIN EN 14049:2004 + A1:2005
  • DIN EN 14049:2006-01 Irrigation techniques - Water application intensity - Calculation principles and measurement methods; German version EN 14049:2003 + A1:2005
  • DIN CEN/TS 15279:2006-06 Workplace exposure - Measurement of dermal exposure - Principles and methods; German version CEN/TS 15279:2006
  • DIN 25457-1:1993 Activity measurement methods for the release of radioactive residual materials and decommissioning components of nuclear facilities; principles for beta and gamma radiation measurements
  • DIN ISO 5725-1:1997 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994)
  • DIN 25457-1:2012 Activity measurement methods for the clearance of radioactive substances and nuclear facility components - Part 1: Fundamentals
  • DIN 58940-8:2002 Medical microbiology - Susceptibility testing of pathogens to antimicrobial agents - Part 8: Microdilution; General method-specific requirements
  • DIN EN ISO 15151:2020-10 Milk, milk products, infant formula and adult nutritionals - Determination of minerals and trace elements - Inductively coupled plasma atomic emission spectrometry (ICP-AES) method (ISO 15151:2018); German version EN ISO 15151:2020
  • DIN EN ISO 21187:2021-06 Milk - Quantitative determination of microbiological quality - Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results (ISO 21187:2021); German version EN ISO 21187:2021
  • DIN SPEC 52407:2015-03 Nanotechnologies - Methods for preparation and assessment for particle measurements with atomic force microscopy (AFM) and transmission scanning electron microscopy (TSEM)
  • DIN EN 12938:2000-10 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry (includes AC:2000); German version EN 12938:1999 + AC:2000
  • DIN 25457-1 Bb.1:2013 Activity measurement methods for the clearance of radioactive substances and nuclear facility components.Part 1: Fundamentals; Supplement 1: Explanations
  • DIN CEN/TS 15633-3:2012-10*DIN SPEC 10700-2:2012-10 Foodstuffs - Detection of food allergens by immunological methods - Part 3: Quantitative determination of hazelnut with an enzyme immunoassay using polyclonal antibodies and Lowry protein detection; German version CEN/TS 15633-3:2012
  • DIN EN ISO 14891:2002-07 Milk and milk products - Determination of nitrogen content - Routine method using combustion according to the Dumas principle (ISO 14891:2002); German version EN ISO 14891:2002
  • DIN 51429-1:2000-11 Testing of petroleum products - Determination of selected trace elements - Part 1: Atomic absorption spectrometry after specific incineration and digestion methods
  • DIN 51457:2023-11 Testing of ceramic raw materials and ceramic materials - Direct determination of mass fractions of trace impurities in powders, granules and lumps of graphite by optical emission spectroscopy by inductively coupled plasma (ICP OES) and by electrotherma...
  • DIN EN 13615:2002-04 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry; German version EN 13615:2001
  • DIN EN ISO 15151:2020 Milk, milk products, infant formula and adult nutritionals - Determination of minerals and trace elements - Inductively coupled plasma atomic emission spectrometry (ICP-AES) method (ISO 15151:2018)
  • DIN EN 12373-5:1999 Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance; German version EN 12373-5:1998
  • DIN EN ISO 10075-3:2004-12 Ergonomic principles related to mental workload - Part 3: Principles and requirements concerning methods for measuring and assessing mental workload (ISO 10075-3:2004); German version EN ISO 10075-3:2004
  • DIN EN ISO 10075-3:2004 Ergonomic principles related to mental workload - Part 3: Principles and requirements concerning methods for measuring and assessing mental workload (ISO 10075-3:2004); German version EN ISO 10075-3:2004
  • DIN EN ISO 21424:2020-10 Milk, milk products, infant formula and adult nutritionals - Determination of minerals and trace elements - Inductively coupled plasma mass spectrometry (ICP-MS) method (ISO 21424:2018); German version EN ISO 21424:2020
  • DIN CEN/TS 15633-2:2013-06*DIN SPEC 10700-1:2013-06 Foodstuffs - Detection of food allergens by immunological methods - Part 2: Quantitative determination of hazelnut with an enzyme immunoassay using monoclonal antibodies and bicinchoninic acid-protein detection; German version CEN/TS 15633-2:2013
  • DIN EN ISO 21187:2021 Milk - Quantitative determination of microbiological quality - Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results (ISO 21187:2021); German version EN ISO 21187:2021
  • DIN EN 60835-1-4/A1:1996 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations; section 4: Transmission performance (IEC 60835-1-4:1992/A1:1995); Germ
  • DIN CEN ISO/TS 29843-1:2014-12*DIN SPEC 91201-1:2014-12 Soil quality - Determination of soil microbial diversity - Part 1: Method by phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (PLEL) analysis (ISO/TS 29843-1:2010); German version CEN ISO/TS 29843-1:2014
  • DIN EN ISO 17781:2017-11 Petroleum, petrochemical and natural gas industries - Test methods for quality control of microstructure of ferritic/austenitic (duplex) stainless steels (ISO 17781:2017); English version EN ISO 17781:2017
  • DIN ISO 7627-2:1991 Hardmetals; chemical analysis by flame atomic absorption spectrometry; determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m); identical with ISO 7627-2:1983
  • DIN ISO 7627-3:1991 Hardmetals; chemical analysis by flame atomic absorption spectrometry; determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m); identical with ISO 7627-3:1983
  • DIN ISO 7627-4:1991 Hardmetals; chemical analysis by flame atomic absorption spectrometry; determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m); identical with ISO 7627-4:1983
  • DIN EN ISO 21424:2020 Milk, milk products, infant formula and adult nutritionals - Determination of minerals and trace elements - Inductively coupled plasma mass spectrometry (ICP-MS) method (ISO 21424:2018)
  • DIN EN ISO 15216-1/A1:2020 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1: Method for quantification - AMENDMENT 1 (ISO 15216-1:2017/DAM 1:2020); German and English version EN ISO 15216-1:2017/
  • DIN 51900-1:2000-04 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 1: Principles, apparatus, methods / Note: To be replaced by DIN 51900 (2022-06).
  • DIN ISO 7627-5:1991 Hardmetals; chemical analysis by flame atomic absorption spectrometry; determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m); identical with ISO 7627-5:1983
  • DIN EN 13615:2002 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry; German version EN 13615:2001
  • DIN 38407-34:2006 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 34: Determination of selected plant treatment agents, biocides and break-down products; Method using gas chromatography (GC-MS)
  • DIN 51900-1:2000 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 1: Principles, apparatus, methods
  • DIN CEN/TS 15633-2:2013 Foodstuffs - Detection of food allergens by immunological methods - Part 2: Quantitative determination of hazelnut with an enzyme immunoassay using monoclonal antibodies and bicinchoninic acid-protein detection; German version CEN/TS 15633-2:2013
  • DIN EN 61338-1-3:2000-10 Waveguide type dielectric resonators - Part 1-3: General information and test conditions; Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency (IEC 61338-1-3:1999); German version EN 61338-1-3:2000
  • DIN CEN/TS 15633-3:2012 Foodstuffs - Detection of food allergens by immunological methods - Part 3: Quantitative determination of hazelnut with an enzyme immunoassay using polyclonal antibodies and Lowry protein detection; German version CEN/TS 15633-3:2012
  • DIN EN ISO 4484-3:2023-08 Textiles and textile products - Microplastics from textile sources - Part 3: Measurement of collected material mass released from textile end products by domestic washing method (ISO 4484-3:2023); German version EN ISO 4484-3:2023
  • DIN EN 12868:2017-04 Child use and care articles - Method for determining the release of N-nitrosamines and N-nitrosatable substances from elastomer or rubber teats and soothers; German version EN 12868:2017

Japanese Industrial Standards Committee (JISC), Microgram mass measurement method and principle

  • JIS Z 8402-1:1999 Accuracy (trueness and precision) of measurement methods and results -- Part 1: General principles and definitions
  • JIS B 1515-2:2006 Rolling bearings -- Tolerances -- Part 2: Measuring and gauging principles and methods
  • JIS Z 8402-1 ERRATUM 1:2000 Accuracy (trueness and precision) of measurement methods and results -- Part 1: General principles and definitions (Erratum 1)
  • JIS K 0400-66-20:1998 Water quality -- Determination of total mercury by flameless atomic absorption spectrometry -- Part 2: Method after pretreatment with ultraviolet radiation

Standard Association of Australia （SAA）, Microgram mass measurement method and principle

  • AS/NZS 2772.2:2011
  • AS/NZS 61000.4.30:2007 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Power quality measurement methods
  • AS 2300.1.8.1:1988 Methods of chemical and physical testing for the dairying industry - General methods and principles - Analytical quality assurance of instrumental methods - Protein in milk
  • AS 2300.1.3:2008
  • AS 2300.1.3:1988 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of fat - Gravimetric method
  • AS/NZS 2772.2:2016 Radiofrequency fields, Part 2: Principles and methods of measurement and computation — 3 kHz to 300 GHz
  • AS 2300.1.2.1:1991 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of nitrogen - Reference Kjeldahl method
  • AS 2300.1.9:1987 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of sucrose and glucose - Enzymatic method
  • AS 3580.9.8:2008 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 continuous direct mass method using a tapered element oscillating microbalance analyser
  • AS 2001.2.13:1987 Methods of test for textiles - Physical tests - Determination of mass per unit area and mass per unit length of fabrics
  • AS 2300.1.4.2:1988 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of fat content of milk and liquid dairy products by the Babcock method - Methodology
  • AS 2300.2.3:1981 Methods of chemical and physical testing for the dairying industry - Liquid milks - Determination of the iodide content of milk - Selective ion electrode method
  • AS 2300.1.2.2:1988 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of nitrogen - Nitrogen fractions from milk
  • AS 2300.1.4.1:1996 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of fat content of milks and liquid dairy products by the Babcock method - Glassware
  • AS/NZS 3580.9.13:2022 Methods for sampling and analysis of ambient air, Method 9.13: Determination of suspended particulate matter — PM2.5 continuous direct mass method using a tapered element oscillating microbalance monitor
  • AS 3580.9.8:2022 Methods for sampling and analysis of ambient air, Method 9.8: Determination of suspended particulate matter — PM10 continuous direct mass method using a tapered element oscillating microbalance analyser
  • AS/NZS 3580.9.13:2013

RU-GOST R, Microgram mass measurement method and principle

  • GOST 8.586.1-2005 State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 1. Principle of the method of measurements and general requirements
  • GOST 28254-2014 Sompound feeds, feed raw materials. Methods for determination of volume mass and natural slope angle
  • GOST R 50721-1994 Knitted fabrics and garments. Methods for determination of appearance and mass part of raw material
  • GOST 2642.2-1986 Refractories and refractory raw materials. Methods for the determination of mass change ignition
  • GOST R ISO 8658-2017 Carbonaceous materials for use in the production of aluminium. Green and calcined coke. Determination of trace elements by flame atomic absorption spectroscopy
  • GOST R ISO 16634-1-2011 Food products. Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content. Part 1. Oilseeds and animal feeding stuffs
  • GOST 24027.1-1980 Methods for determination of authenticity, granary pest infestation, crushing and admixtures content
  • GOST 31650-2012 Medical remedies for animals, feed and feed additives. Detection of mass fraction of mercury by atom absorbtion spectrometric method
  • GOST R 53101-2008 Medical remedies for veterinary use, feed and feed additives. Detection of mass fraction of arsenic by atom absorbtion spectrometric method
  • GOST R 51423-1999 Feedstuffs, compound feeds, feed raw materials. Method for determination of soluble nitrogen fraction of total mass after treatment with pepsin in dilute hydrochloric acid
  • GOST R 53351-2009 Medical remedies for animals, feed and feed additives. Detection of mass fraction of selenium by atom absorbtion spectrometric method
  • GOST R 53100-2008 Medical remedies for veterinary use, feed and feed additives. Detection of mass fraction of cadmium and lead by atom absorbtion spectrometric method
  • GOST R 53352-2009 Medical remedies for animals, feed and feed additives. Detection of mass fraction of mercury by atom absorbtion spectrometric method
  • GOST ISO 9727-2-2016 Cylindrical cork stoppers. Methods for determination of physical properties. Part 2. Determination of mass and apparent density for agglomerated cork stoppers
  • GOST R ISO 9727-2-2012 Cylindrical cork stoppers. Methods for determination of physical properties. Part 2. Determination of mass and apparent density for agglomerated cork stoppers

American Society for Testing and Materials (ASTM), Microgram mass measurement method and principle

  • ASTM D7996-15 Standard Test Method for Measuring Visible Spectrum of Asphaltenes in Heavy Fuel Oils and Crude Oils by Spectroscopy in a Microfluidic Platform
  • ASTM D3683-94(2000) Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption
  • ASTM F1845-97 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Reduction Glow Discharge Mass Spectrometer
  • ASTM F1845-97(2002) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Reduction Glow Discharge Mass Spectrometer
  • ASTM F1845-08 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Resolution Glow Discharge Mass Spectrometer
  • ASTM D6968-03 Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection
  • ASTM D6968-03(2009) Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection
  • ASTM D6968-03(2015) Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection
  • ASTM D7504-15 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
  • ASTM D5917-15e1 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
  • ASTM C1301-95 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
  • ASTM C1301-22 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
  • ASTM C1301-95(2009)e1 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
  • ASTM D3561-02(2007)e1 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
  • ASTM D3561-96 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
  • ASTM D3561-02 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
  • ASTM D8351-22 Standard Test Method for Determination of Trace Elements in Biodiesel and Biodiesel Blends by Microwave Plasma Atomic Emission Spectrometry (MP-AES)
  • ASTM D7504-11 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
  • ASTM D5802-95 Standard Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles)
  • ASTM D5802-95(2001) Standard Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles)
  • ASTM E159-17 Standard Test Method for Loss of Mass in a Reducing Gas Atmosphere for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)
  • ASTM F1227-89(1999) Test Method for Total Mass Loss of Materials and Condensation of Outgassed Volatiles on Microelectronics-Related Substrates (Withdrawn 2000)
  • ASTM D6357-21a Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively
  • ASTM D6357-21b Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively
  • ASTM D6357-19 Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively
  • ASTM D6357-21 Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively
  • ASTM D6357-00a Test Methods for Determination of Trace Elements in Coal, Coke, Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, Graphite Furnace Atomic Absorption Spectrometry
  • ASTM D6357-11 Test Methods for Determination of Trace Elements in Coal, Coke, & Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry
  • ASTM D6349-07 Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma-Atomic Emission Spectrometry
  • ASTM D6349-08e1 Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasmax2014;Atomic Emission Spectrometry
  • ASTM D6349-09 Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma&x2014;Atomic Emission Spectrometry
  • ASTM B963-08 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedesx2019; Principle
  • ASTM B963-11 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedesx2019; Principle
  • ASTM D6349-13 Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasmamdash;Atomic Emission Spectrometry

CU-NC, Microgram mass measurement method and principle

  • NC 90-18-06-1988 Standards System for Metrological Assurance. Gamma Radiation Sources. Exposure Power Measures. Methods and Means of Verification

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Microgram mass measurement method and principle

  • GB/T 35812-2018 Method for analysis of forestry biomass—Determination of insoluble solids following pretreatment
  • GB/T 20899.14-2017 Methods for chemical analysis of gold ores-Part 14: Determination of thallium content - Inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry
  • GB/T 8152.13-2017 Methods for chemical analysis of lead concentrates—Part 13：Determination of thallium content—Inductively coupled plasma mass spectrometry and inductively coupled plasma-atomic emission spectrometry
  • GB/T 8151.21-2017 Methods for chemical analysis of zinc concentrates—Part 21：Determination of thallium content—Inductively coupled plasma mass spectrometry and inductively coupled plasma-atomic emission spectrometry

European Telecommunications Standards Institute (ETSI), Microgram mass measurement method and principle

  • ETSI EG 202 765-2-2009 Speech Processing, Transmission and Quality Aspects (STQ); QoS and network performance metrics and measurement methods Part 2: Transmission Quality Indicator combining Voice Quality Metrics V1.1.1
  • ETSI ES 202 765-2-2010 Speech and multimedia Transmission Quality (STQ); QoS and network performance metrics and measurement methods; Part 2: Transmission Quality Indicator combining Voice Quality Metrics V1.1.4
  • ETSI EG 202 765-3-2009 Speech and multimedia Transmission Quality (STQ); QoS and network performance metrics and measurement methods; Part 3: Network performance metrics and measurement methods in IP networks V1.1.1
  • ETSI EG 202 765-3-2010 Speech and multimedia Transmission Quality (STQ); QoS and network performance metrics and measurement methods; Part 3: Network performance metrics and measurement methods in IP networks (V1.1.2)
  • ETSI EG 202 765-1-2009 Speech and multimedia Transmission Quality (STQ); QoS and network performance metrics and measurement methods; Part 1: General considerations V1.1.1
  • ETSI EG 202 765-1-2010 Speech and multimedia Transmission Quality (STQ); QoS and network performance metrics and measurement methods; Part 1: General considerations
  • ETSI TR 102 648-1-2006 Speech Processing, Transmission and Quality Aspects (STQ); Test Methodologies for ETSI Test Events and Results; Part 1: VoIP Speech Quality Testing (V1.1.1)
  • ETSI ES 202 765-4-2010 Speech and multimedia Transmission Quality (STQ); QoS and network performance metrics and measurement methods; Part 4: Indicators for supervision of Multiplay services (V1.2.1)
  • ETSI EG 201 377-3-2003 Speech Processing, Transmission and Quality Aspects (STQ); Specification and measurement of speech transmission quality; Part 3: Non-intrusive objective measurement methods applicable to networks and links with classes of services
  • ETSI EG 202 086-2008 Speech Processing, Transmission and Quality Aspects (STQ); Objectives and principles for the transmission performance of multiple interconnected networks that aim to provide "traditional quality" telephony services
  • ETSI TR 102 648-2-2007 Speech Processing, Transmission and Quality Aspects (STQ); Test Methodologies for ETSI Test Events and Results; Part 2: 1st ETSI Plugtests Speech Quality Test Event Report (V1.1.1)
  • ETSI TR 102 648-3-2007 Speech Processing, Transmission and Quality Aspects (STQ); Test Methodologies for ETSI Test Events and Results; Part 3: 2nd ETSI Plugtests Speech Quality Test Event Report
  • ETSI EG 202 396-3-2007 Speech Processing, Transmission and Quality Aspects (STQ); Speech Quality performance in the presence of background noise Part 3: Background noise transmission Objective test methods V1.1.1
  • ETSI EG 202 396-3-2009 Speech Processing, Transmission and Quality Aspects (STQ); Speech Quality performance in the presence of background noise Part 3: Background noise transmission - Objective test methods V1.2.1
  • ETSI EG 202 396-3-2011 Speech and multimedia Transmission Quality (STQ); Speech Quality performance in the presence of background noise Part 3: Background noise transmission - Objective test methods V1.3.1
  • ETSI EG 202 518-2008 Speech Processing, Transmission and Quality Aspects (STQ); Acoustic Output of Terminal Equipment; Maximum Levels and Test Methodology for Various Applications V1.2.1
  • ETSI EG 202 518-2006 Speech Processing, Transmission and Quality Aspects (STQ); Acoustic Output of Terminal Equipment; Maximum Levels and Test Methodology for Various Applications V1.1.1
  • ETSI EG 202 518-2010 Speech and multimedia Transmission Quality (STQ); Acoustic Output of Terminal Equipment; Maximum Levels and Test Methodology for Various Applications V1.3.1

国家市场监督管理总局、中国国家标准化管理委员会, Microgram mass measurement method and principle

  • GB/T 6609.1-2018 Chemical analysis methods and determination of physical performance of alumina—Part 1：Determination of trace elements content—Inductively coupled plasma atomic emission spectrometry method
  • GB/T 40374-2021 Hardmetals—Determination of lead and cadmium content—Flame atomic absorption spectrometric method and inductively coupled plasma atomic emission spectrometry
  • GB/T 6609.30-2022 Chemical analysis methods and determination of physical performance of alumina—Part 30: Determination of trace elements—Wavelength dispersive X-ray fluorescence spectrometric method
  • GB/T 6609.2-2022 Chemical analysis methods and determination of physical performance of alumina—Part 2: Determination of loss of mass at 300 ℃ and 1000 ℃
  • GB/T 6609.12-2018 Chemical analysis methods and determination of physical performance of alumina—Part 12：Determination of zinc oxide content—Flame atomic absorption spectrometry method
  • GB/T 7739.14-2019 Methods for chemical analysis of gold concentrates—Part 14: Determination of thallium content—Inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry

BELST, Microgram mass measurement method and principle

  • STB 2447-2016 Knitted fabrics and garments. Methods for determination of appearance and mass part of raw materia
  • STB 1931-2009 Wine production and wine raw material. Methods for determination a mass concentration of titrating acids

International Organization for Standardization (ISO), Microgram mass measurement method and principle

  • ISO 11698-2:2000 Micrographics - Methods of measuring image quality produced by aperture card scanners - Part 2: Quality criteria and control
  • ISO 15216-1:2017 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1: Method for quantification
  • ISO 21187:2021 | IDF 196:2021 Milk — Quantitative determination of microbiological quality — Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results
  • ISO 10075-3:2004 Ergonomic principles related to mental workload - Part 3: Principles and requirements concerning methods for measuring and assessing mental workload
  • ISO 6228:1980 Chemical products for industrial use; General method for determination of traces of sulphur compounds, as sulphate, by reduction and titrimetry
  • ISO 14891:2002 | IDF 185:2002 Milk and milk products — Determination of nitrogen content — Routine method using combustion according to the Dumas principle
  • ISO 15151:2018 Milk, milk products, infant formula and adult nutritionals — Determination of minerals and trace elements — Inductively coupled plasma atomic emission spectrometry (ICP-AES) method
  • ISO/TS 15216-1:2013 Microbiology of food and animal feed - Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR - Part 1: Method for quantification
  • ISO 15216-1:2017/Amd 1:2021 Microbiology of the food chain — Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR — Part 1: Method for quantification — Amendment 1
  • ISO 15151:2018 | IDF 229:2018 Milk, milk products, infant formula and adult nutritionals — Determination of minerals and trace elements — Inductively coupled plasma atomic emission spectrometry (ICP-AES) method
  • ISO 21424:2018 Milk, milk products, infant formula and adult nutritionals — Determination of minerals and trace elements — Inductively coupled plasma mass spectrometry (ICP-MS) method
  • ISO 21424:2018 | IDF 243:2018 Milk, milk products, infant formula and adult nutritionals — Determination of minerals and trace elements — Inductively coupled plasma mass spectrometry (ICP-MS) method
  • ISO 37160:2020 Smart community infrastructure — Electric power infrastructure — Measurement methods for the quality of thermal power infrastructure and requirements for plant operations and management
  • ISO/TR 9122-2:1990 Toxicity testing of fire effluents; part 2: guidelines for biological assays to determine the acute inhalation toxicity of fire effluents (basic principles, criteria and methodology)
  • ISO 13061-1:2014 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 1: Determination of moisture content for physical and mechanical tests
  • ISO 4484-3:2023 Textiles and textile products — Microplastics from textile sources — Part 3: Measurement of collected material mass released from textile end products by domestic washing method
  • ISO 3233-2:2014 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Arc
  • ISO 13061-4:2014 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 4: Determination of modulus of elasticity in static bending

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Microgram mass measurement method and principle

  • GB/T 19475.2-2004 Micrographics-Methods of measuring image quality produced by aperture card scanners-Part 2:Quality criteria and control
  • GB/T 6609.30-2009 Chemical analysis methods and determination of physical performance of alumina.Part 30:X-ray fluorescence spectrometric method for the determination content of trace elements
  • GB/T 20255.3-2006 Methods for chemical analysis of hardmetals.Determination of molybdenum, titanium and vanadium contents.Flame atomic absorption spectrometric method
  • GB/T 6609.19-2004 Chemical analysis methods and determination of physical performance of alumina Determination of lithia content-Flame atomic absorption spectrophotometric method
  • GB/T 6609.20-2004 Chemical analysis methods and determination of physical performance of alumina Determination of magnesia content-Flame atomic absorption spectrophotometric method
  • GB/T 6609.12-2004 Chemical analysis methods and determination of physical performance of alumina Determination of zinc oxide content-Flame atomic absorption spectrophotometric method
  • GB/T 6609.13-2004 Chemical analysis methods and determination of physical performance of alumina Determination of calcium oxide content-Flame atomic absorption spectrophotometric method
  • GB/T 6609.20-2004 Methods for chemical analysis of alumina and methods for determining physical properties
  • GB/T 20255.1-2006 Methods for chemical analysis of hardmetals. Determination of calcium,potassium,magnesium and sodium contents. Flame atomic absorption spectrometric method
  • GB/T 20255.2-2006 Methods for chemical analysis of hardmetals. Determination of cobalt,iron,manaanese and nickel contents. Flame atomic absorption spectrometric method
  • GB/T 6609.2-2009 Chemical analysis methods and determination of physical performance of aluminium hydroxide.Part 2:Determination of loss of mass at 300℃ and 1000℃
  • GB/T 6609.11-2004 Chemical analysis methods and determination of physical performance of alumina Determination of manganous oxide content-Flame atomic absorption spectrophotometric method
  • GB/T 20255.4-2006 Methods for chemical analysis of hardmetals .Determination of cobalt,iron,manganese, molybdenum,nickel,titanium and vanadium contents.Flame atomic absorption spectrometric method
  • GB/T 6609.19-2018 Chemical analysis methods and determination of physical performance of alumina.Part 19:Determination of lithium oxide content.Flame atomic absorption spectrometry method
  • GB/T 2951.41-2008 Common test method for insulating and sheathing materials of electric and optical cables.Part 41:Methods specific to polyethylene and polypropylene compounds.Resistance to environmental stress cracking.Measurement of the melt flow index.Carbon black and/o

ETSI - European Telecommunications Standards Institute, Microgram mass measurement method and principle

  • EG 201 377-1-1999 Speech Processing@ Transmission and Quality Aspects (STQ); Specification and Measurement of Speech Transmission Quality; Part 1: Introduction to Objective Comparison Measurement Methods for One-Way Speech Quality Across Networks (V1.1.1)
  • EG 201 377-1-2002 Speech Processing@ Transmission and Quality Aspects (STQ); Specification and Measurement of Speech Transmission Quality; Part 1: Introduction to Objective Comparison Measurement Methods for One-Way Speech Quality Across Networks (V1.2.1)
  • EG 202 765-2-2009 Speech Processing@ Transmission and Quality Aspects (STQ); QoS and network performance metrics and measurement methods Part 2: Transmission Quality Indicator combining Voice Quality Metrics (V1.1.1)
  • EG 202 765-2-2008 Speech Processing@ Transmission and Quality Aspects (STQ); QoS and network performance metrics and measurement methods Part 2: Transmission Quality Indicator combining Voice Quality Metrics (V1.1.1)
  • TR 102 648-1-2006 Speech Processing@ Transmission and Quality Aspects (STQ); Test Methodologies for ETSI Test Events and Results; Part 1: VoIP Speech Quality Testing (V1.1.1)
  • EG 201 377-3-2003 Speech Processing@ Transmission and Quality Aspects (STQ); Specification and measurement of speech transmission quality; Part 3: Non-intrusive objective measurement methods applicable to networks and links with classes of services (V1.1.1)
  • TR 102 648-2-2007 Speech Processing@ Transmission and Quality Aspects (STQ); Test Methodologies for ETSI Test Events and Results; Part 2: 1st ETSI Plugtests Speech Quality Test Event Report (V1.1.1)
  • TR 102 648-3-2007 Speech Processing@ Transmission and Quality Aspects (STQ); Test Methodologies for ETSI Test Events and Results; Part 3: 2nd ETSI Plugtests Speech Quality Test Event Report (V1.1.1)
  • EG 202 396-3-2009 Speech Processing@ Transmission and Quality Aspects (STQ); Speech Quality performance in the presence of background noise Part 3: Background noise transmission - Objective test methods (V1.2.1)
  • EG 202 396-3-2008 Speech Processing@ Transmission and Quality Aspects (STQ); Speech Quality performance in the presence of background noise Part 3: Background noise transmission - Objective test methods (V1.2.1)
  • EG 202 396-3-2007 Speech Processing@ Transmission and Quality Aspects (STQ); Speech Quality performance in the presence of background noise Part 3: Background noise transmission Objective test methods (V1.1.1)
  • EG 202 518-2008 Speech Processing@ Transmission and Quality Aspects (STQ); Acoustic Output of Terminal Equipment; Maximum Levels and Test Methodology for Various Applications (V1.2.1)
  • EG 202 518-2006 Speech Processing@ Transmission and Quality Aspects (STQ); Acoustic Output of Terminal Equipment; Maximum Levels and Test Methodology for Various Applications (V1.1.1)

European Committee for Standardization (CEN), Microgram mass measurement method and principle

  • EN 14049:2003 Irrigation techniques - Water application intensity - Calculation principles and measurement methods
  • EN ISO 14891:2002 Milk and Milk Products - Determination of Nitrogen Content - Routine Method Using Combustion According to the Dumas Principle
  • EN ISO 15151:2020 Milk, milk products, infant formula and adult nutritionals - Determination of minerals and trace elements - Inductively coupled plasma atomic emission spectrometry (ICP-AES) method (ISO 15151:2018)
  • EN ISO 10075-3:2004 Ergonomic principles related to mental workload - Part 3: Principles and requirements concerning methods for measuring and assessing mental workload
  • EN ISO 21424:2020 Milk, milk products, infant formula and adult nutritionals - Determination of minerals and trace elements - Inductively coupled plasma mass spectrometry (ICP-MS) method (ISO 21424:2018)
  • PD CEN/TS 15633-2:2013 Foodstuffs - Detection of food allergens by immunological methods - Part 2: Quantitative determination of hazelnut with an enzyme immunoassay using monoclonal antibodies and bicinchoninic acid-protein detection
  • CEN ISO/TS 29843-1:2014 Soil quality - Determination of soil microbial diversity - Part 1: Method by phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (PLEL) analysis (ISO/TS 29843-1:2010)
  • EN 1097-5:1999 Test for Mechanical and Physical Properties of Aggregates - Part 5: Determination of the Water Content by Drying in a Ventilated Oven

ES-UNE, Microgram mass measurement method and principle

  • UNE-EN 12938:1999 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry
  • UNE-EN 13615:2001 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry
  • UNE-EN 13615:2001/AC:2002 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry (Endorsed by AENOR in February of 2003.)
  • UNE-EN ISO 15151:2021 Milk, milk products, infant formula and adult nutritionals - Determination of minerals and trace elements - Inductively coupled plasma atomic emission spectrometry (ICP-AES) method (ISO 15151:2018)
  • UNE-EN ISO 21187:2021 Milk - Quantitative determination of microbiological quality - Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results (ISO 21187:2021)
  • UNE-EN ISO 20647:2021 Infant formula and adult nutritionals - Determination of minerals and trace elements - Inductively coupled plasma mass spectrometry (ICP-MS) method (ISO 20647:2015)
  • UNE-EN ISO 21424:2021 Milk, milk products, infant formula and adult nutritionals - Determination of minerals and trace elements - Inductively coupled plasma mass spectrometry (ICP-MS) method (ISO 21424:2018)
  • UNE-CEN/TS 15633-2:2013 Foodstuffs - Detection of food allergens by immunological methods - Part 2: Quantitative determination of hazelnut with an enzyme immunoassay using monoclonal antibodies and bicinchoninic acid-protein detection (Endorsed by AENOR in June of 2013.)
  • UNE-EN ISO 17781:2017 Petroleum, petrochemical and natural gas industries - Test methods for quality control of microstructure of ferritic/austenitic (duplex) stainless steels (ISO 17781:2017) (Endorsed by Asociación Española de Normalización in October of 2017.)
  • UNE-EN 61338-1-5:2015 Waveguide type dielectric resonators - Part 1-5: General information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency (Endorsed by AENOR in October of 2015.)
  • UNE-EN 61338-1-3:2000 Waveguide type dielectric resonators -- Part 1-3: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency (Endorsed by AENOR in August of 2000.)
  • UNE-EN ISO 4484-3:2023 Textiles and textile products - Microplastics from textile sources - Part 3: Measurement of collected material mass released from textile end products by domestic washing method (ISO 4484-3:2023) (Endorsed by Asociación Española de Normalización in ...
  • UNE-EN 12868:2018 Child use and care articles - Method for determining the release of N-nitrosamines and N-nitrosatable substances from elastomer or rubber teats and soothers

YU-JUS, Microgram mass measurement method and principle

  • JUS C.K5.025-1979 Magnetic sheets. Methods of testing. Preparation of specimens for the checking ofquality and testing of magnetic properties.

AT-ON, Microgram mass measurement method and principle

  • ONORM ISO 5666 Teil.2:1984 Water quality; determination of total mercury by flameless atomic absorption spectrometry; method after pretreatment with ultraviolett radiation
  • OENORM EN ISO 21187:2021 Milk - Quantitative determination of microbiological quality - Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results (ISO 21187:2021)
  • OENORM EN ISO 15216-1:2021 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1: Method for quantification (ISO 15216-1:2017 + Amd 1:2021) (consolidated version)

VN-TCVN, Microgram mass measurement method and principle

  • TCVN 7113-3-2011 Ergonomic principles related to mental workload.Principles and requirements concerning methods for measuring and assessing mental workload

GOSTR, Microgram mass measurement method and principle

  • GOST 33815-2016 Wine products and raw materials for it’s production. Method for determination of mass concentration of total and the reduced extract
  • GOST 34139-2017 Food products, food raw materials. Method for determination of the residual content of sedatives and blockers by high performance liquid chromatography - mass spectrometry
  • GOST R 57175-2016 Requirements for the quality and safety of PCR kits, research and testing using the PCR method in the identification of the target taxa of microorganisms, plants and genetically modified organisms
  • GOST 34136-2017 Food products, food raw materials. Method for determination of the residual content of macrolides, lincosamides and pleuromutilins by high performance liquid chromatography - mass spectrometry

IT-UNI, Microgram mass measurement method and principle

  • UNI EN ISO 21187:2021 Milk - Quantitative determination of microbiological quality - Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results

未注明发布机构, Microgram mass measurement method and principle

  • BS 6068-2.34:1988(2011) Water quality — Part 2 : Physical, chemical and biochemical methods — Section 2.34 Method for the determination of the chemical oxygen demand

Professional Standard - Light Industry, Microgram mass measurement method and principle

  • QB/T 3814-1999 Surface examination method of the metal deposits and conversion coatings for the light industrial products

RO-ASRO, Microgram mass measurement method and principle

  • STAS 9484/22-1982 SILICO-ALUMINOUS MINING PRODUCTS Methods of physical ands mechanical tests Determination of free sand content
  • STAS 8750/5-1972 CARPETS AND MOQUETTES Determination of mass of pile per squar meter, by teasing

Professional Standard - Non-ferrous Metal, Microgram mass measurement method and principle

  • YS/T 581.5-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 5:Determination of sodium by flame atomic absorption spectrometric method
  • YS/T 273.5-2006 Chemical analysis methods and physical properties of cryolite. Part 5:Determination of sodium by flame atomic absorption spectrometric method
  • YS/T 53.2-1992 Copper, lead, zinc ore and tailings chemical analysis method flow injection-8531 fiber micro-column separation and enrichment-flame atomic absorption spectrometry gold determination
  • YS/T 273.12-2006 Chemical analysis methods and physical properties of cryolite. Part 12:The atomic absorption spectrophotometric method for the determination of calcium oxide content
  • YS/T 53.2-2010 Methods for chemical analysis of copper, lead, zinc original and tailing ores- Part 2: Determination of gold content- Separation and preconcentration by flow injection and 8531 fiber micro-column-the flame atomic absorption spectrum method

Professional Standard - Geology, Microgram mass measurement method and principle

  • DZ/T 0064.12-2021 Methods for analysis of groundwater quality - Part 12: Determination of calcium and magnesium content by flame atomic absorption spectrophotometry
  • DZ/T 0064.83-2021 Methods of analysis of groundwater quality - Part 83: Determination of copper, zinc, cadmium, nickel and cobalt by flame atomic absorption spectrophotometry
  • DZ/T 0064.21-2021 Methods of analysis of groundwater quality - Part 21: Determination of copper, lead, zinc, cadmium, nickel, chromium, molybdenum and silver by flameless atomic absorption spectrophotometry
  • DZ/T 0064.20-2021 Analytical methods of groundwater quality - Part 20: Determination of copper, lead, zinc, cadmium, nickel and cobalt content Chelating resin exchange enrichment flame atomic absorption spectrophotometry

CH-SNV, Microgram mass measurement method and principle

  • SN EN ISO 21187:2021 Milk - Quantitative determination of microbiological quality - Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results (ISO 21187:2021)
  • SN EN ISO 15151:2020 Milk, milk products, infant formula and adult nutritionals - Determination of minerals and trace elements - Inductively coupled plasma atomic emission spectrometry (ICP-AES) method (ISO 15151:2018)
  • SN EN ISO 21424:2020 Milk, milk products, infant formula and adult nutritionals - Determination of minerals and trace elements - Inductively coupled plasma mass spectrometry (ICP-MS) method (ISO 21424:2018)
  • SN EN ISO 15216-1/A1:2021 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1: Method for quantification (ISO 15216-1:2017/Amd 1:2021); Amendment A1

PL-PKN, Microgram mass measurement method and principle

  • PN-EN ISO 21187-2021-08 E Milk - Quantitative determination of microbiological quality - Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results (ISO 21187:2021)
  • PN-EN ISO 15151-2020-12 E Milk, milk products, infant formula and adult nutritionals--Determination of minerals and trace elements--Inductively coupled plasma atomic emission spectrometry (ICP-AES) method (ISO 15151:2018)
  • PN-EN ISO 21424-2020-12 E Milk, milk products, infant formula and adult nutritionals--Determination of minerals and trace elements--Inductively coupled plasma mass spectrometry (ICP-MS) method (ISO 21424:2018)

工业和信息化部, Microgram mass measurement method and principle

  • YS/T 273.16-2020 Methods of chemical analysis and physical properties of cryolite Part 16: Determination of lithium content Flame atomic absorption spectrometry
  • YS/T 273.17-2020 Methods of chemical analysis and physical properties of cryolite Part 17: Determination of elemental content by inductively coupled plasma atomic emission spectrometry
  • YS/T 1171.13-2021 Methods for chemical analysis of recycled zinc raw materials Part 13: Determination of thallium content by inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry
  • YS/T 445.14-2019 Methods for chemical analysis of silver concentrates Part 14: Determination of thallium content by inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry
  • YS/T 1050.10-2016 Methods for chemical analysis of lead and antimony concentrates Part 10 Determination of thallium content Inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry
  • YS/T 461.12-2016 Methods for chemical analysis of mixed lead-zinc concentrates Part 12: Determination of thallium content by inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry

IN-BIS, Microgram mass measurement method and principle

International Dairy Federation (IDF), Microgram mass measurement method and principle

  • IDF 185-2002 Milk and milk products - Determination of nitrogen content - Routine method using combustion according to the Dumas principle

ES-AENOR, Microgram mass measurement method and principle

Indonesia Standards, Microgram mass measurement method and principle

  • SNI 01-5006.11-2002 Forestry plants - Part 11: Physisc and physiologic quality test methods of acacia (Acacia mangium Willd) seeds

International Telecommunication Union (ITU), Microgram mass measurement method and principle

  • ITU-T E.457 FRENCH-1996 Facsimile Measurement Methodologies - Telephone Network and ISDN Quality of Service Network Management and Traffic Engineering (Study Group 2) 11 pp
  • ITU-T E.457 SPANISH-1996 Facsimile Measurement Methodologies - Telephone Network and ISDN Quality of Service Network Management and Traffic Engineering (Study Group 2) 11 pp
  • ITU-T E.457-1996 Facsimile Measurement Methodologies - Telephone Network and ISDN Quality of Service Network Management and Traffic Engineering (Study Group 2) 11 pp

Military Standard of the People's Republic of China-General Armament Department, Microgram mass measurement method and principle

  • GJB 2589.20A-2021 Test methods for physical and chemical properties of military leather fur Part 20: Determination of nitrogen content and cortex
  • GJB 2589.2A-2021 Test methods for physical and chemical properties of military leather fur Part 2: Determination of apparent density and mass per unit area

KE-KEBS, Microgram mass measurement method and principle

  • KS 08-264-1981 KENYA STANDARD METHODS FOR ESTIMATION OF MOISTURE. TOTAL SIZE OR FINISH, ASH. FATTY MATTER AND DETERMINATION OF WATER-SOLUBLE MATTER IN TEXTILES

CEN - European Committee for Standardization, Microgram mass measurement method and principle

  • PREN 16172-2010 Sludge@ treated biowaste and soil - Determination of trace elements in aqua regia and nitric acid digests - Graphite furnace atomic absorption spectrometry method (GFAAS)

KR-KS, Microgram mass measurement method and principle

  • KS M ISO 3233-2-2021 Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 2: Method using the determination of non-volatile-matter content in accordance with KS M ISO 3251 and determ
  • KS C IEC 61338-1-5-2019 Waveguide type dielectric resonators — Part 1-5: General information and test conditions — Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave
  • KS Q ISO 16355-1-2018 Application of statistical and related methods to new technology and product development process — Part 1: General principles and perspectives of Quality Function Deployment(QFD
  • KS C IEC 61338-1-3-2018 Waveguide type dielectric resonators ― Part 1-3: General information and test conditions ― Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency
  • KS C IEC 61338-1-3-2018(2023) Waveguide type dielectric resonators ― Part 1-3: General information and test conditions ― Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency
  • KS M ISO 3233-2-2016 Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 2: Method using the determination onon-volatile-matter content in accordance with ISO 3251 andfdetermination

European Committee for Electrotechnical Standardization（CENELEC）, Microgram mass measurement method and principle

  • EN 61338-1-5:2015 Waveguide type dielectric resonators - Part 1-5: General information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency

Professional Standard - Commodity Inspection, Microgram mass measurement method and principle

  • SN/T 2320-2009 Determination of chlorthalonil,dichlofluanind,tolylfluanid,captan,folpet,captafol and deltamethrin residues in food for import and export.GC/MS method

International Electrotechnical Commission (IEC), Microgram mass measurement method and principle

  • IEC 61338-1-5:2015 Waveguide type dielectric resonators - Part 1-5: General information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave
  • IEC PAS 61338-1-5:2010 Waveguide type dielectric resonators - Part 1-5: General information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency

IEC - International Electrotechnical Commission, Microgram mass measurement method and principle

  • PAS 61338-1-5-2010 Waveguide type dielectric resonators – Part 1-5: General information and test conditions – Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency (Edition 1.0)

TH-TISI, Microgram mass measurement method and principle

  • TIS 1780.16-1999 General Methods of test for pigments and extenders part 16:determination of relative tinting strength (or equivalent colouring value)and colour on reduction of coloured pigments-visual comparison method

  Microgram mass measurement method and principle.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved