ZH
RU
ES

Compressive Strength and Compressive Stress

Compressive Strength and Compressive Stress, Total:496 items.

In the international standard classification, Compressive Strength and Compressive Stress involves: Electrical accessories, Construction materials, Cellular materials, Testing of metals, Paper and board, Aerospace fluid systems and components, Wood, sawlogs and sawn timber, Products of the chemical industry, Paper products, Metalliferous minerals, Mining and quarrying, Refractories, Rubber, Soil quality. Pedology, Ceramics, Railway rolling stock, Iron and steel products, Adhesives, Compressors and pneumatic machines, Seals, glands, Fuels, Springs, Natural gas, Equipment for petroleum and natural gas industries, Products of the textile industry, Acoustics and acoustic measurements, Protective equipment, Fluid storage devices, Rubber and plastics products, Powder metallurgy, Reinforced plastics, Freight distribution of goods, Measurement of force, weight and pressure, Structures of buildings, Waxes, bituminous materials and other petroleum products, Analytical chemistry, Road vehicle systems, Plastics, Hand-held tools, Pipeline components and pipelines, Refrigerating technology, Inorganic chemicals, Installations in buildings, Protection against fire, Test conditions and procedures in general, Raw materials for rubber and plastics, Materials for aerospace construction, Materials for the reinforcement of composites, Chipless working equipment, Wood-based panels, Insulating materials, Surface treatment and coating, Mechanical testing, Road engineering, Earthworks. Excavations. Foundation construction. Underground works, Electrical wires and cables, Pharmaceutics, Particle size analysis. Sieving, Fasteners.

RO-ASRO, Compressive Strength and Compressive Stress

STAS 8664-1970 COMPRESSION STRES STREXGTH CHARACTERISTICS OF FLEXIBII.E CELLULAR MATERIALS
STAS 10275/4-1991 PLASTER Determination of bending resistance and compression strength
STAS 2055/5-1985 ABRASIVE MATEKIALS Dctermination of compression strength
STAS 10537-1976 CARBON MATERIALS Determination of (he strength to compression, bending and traction
STAS 7039/3-1983 Pre-strcssed concrete pressure tubes VIBRATED AND COMPRESSED PRE-STRESSED CONCRETE PRESSURE TUBES
STAS 126-1990 SHAPED REFRACTORY PRODCTS Compression strength determination
STAS 9484/3-1974 SILICA-ALUMINA MINING PRODUCTS Methods of physical and mechanical tests. Determination of compression strength and tensile strength
STAS SR ISO 7743+A1:1995 Vulcanized or thermoplastic-rubber Determination of compression stress-strain properties
STAS SR ISO 3386/1:1986 Polymeric materials, cellular flexible. Determination of stress-strain characteristics in compression. Part 1: Low-density materials
STAS 6200/5-1971 SHAPED NATURAL STONE FOR BUILDING Methods of physical, mechanical and mineralogical test Determination of the compression strength
STAS 6917-1988 COMPRESSION, TENSION AND TORSION COILED SPRINGS Rules and methods for quality checking up

German Institute for Standardization, Compressive Strength and Compressive Stress

DIN 48085-2:1985 Compression connectors, restistant to high tensile stresses, for aluminium-conductors
DIN 3171-1:2000 Breathing apparatus - Compressed gas cylinders for compressed air and compressed oxygen - Part 1: Seamless steel cylinders, for 300 bar and 450 bar test pressure
DIN EN ISO 15970:2014-09 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008); German version EN ISO 15970:2014
DIN 3171-2:2000 Breathing apparatus - Compressed gas cylinders for compressed air and compressed oxygen - Part 2: Composite cylinders for 300 bar and 450 bar test pressure
DIN EN 17224:2019-09 Determination of compressive shear strength of wood adhesives at elevated temperatures; German version EN 17224:2019
DIN 51910:2009 Testing of carbonaceous materials - Determination of compressive strength - Solid materials
DIN EN 17224:2019 Determination of compressive shear strength of wood adhesives at elevated temperatures
DIN 48083-3:1985-04 Dies for presses for pressure connections; hydraulical presses with a nominal compressive force up to 300, up to 450 and up to 1000 kN connecting; dimensions
DIN V 14430:2004 Fire fighting - Positive pressure foam systems and compressed air foam systems
DIN EN ISO 3386-2:1998 Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 2: High-density materials (ISO 3386-2:1997); German version EN ISO 3386-2:1997
DIN 52376:2016-07 Testing of plywood - Determination of compression strength parallel to the surfaces
DIN 52272-1:1982 Testing of mineral fibrous insulating materials; pressure test; evaluation of compressive stress and resistance to compression
DIN EN ISO 14126:2000 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999); German version EN ISO 14126:1999
DIN EN ISO 3386-1:1998 Polymeric materials, cellular flexible - Determination of stress-strain characteristic in compression - Part 1: Low-density materials (ISO 3386-1:1986); German version EN ISO 3386-1:1997
DIN EN ISO 3386-2:2010-09 Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials (ISO 3386-2:1997 + Amd 1:2010); German version EN ISO 3386-2:1998 + A1:2010
DIN 48083-1:1985-04 Dies for presses for pressure connections; mechanical presses with a nominal compressive force up to 15 and up to 60 kN connecting; dimensions
DIN 48085-2:1985-04 Compression connectors, restistant to high tensile stresses, for aluminium-conductors / Note: To be replaced by DIN VDE 0212-485 (2022-08).
DIN 4663:1988 Compressed gas containers; seamless aluminium alloy cylinders; rated for 250 bar and 300 bar test pressure
DIN ISO 7743:2006 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties (ISO 7743:2004) English version of DIN ISO 7743:2006-11
DIN ISO 7743:2016 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties (ISO 7743:2011)
DIN EN 17150:2019-11 Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of short-term compression strength of boxes; German version EN 17150:2019
DIN 52376:1978 Testing of plywood; determination of compression strength parallel to the surfaces
DIN 52376:2016 Testing of plywood - Determination of compression strength parallel to the surfaces
DIN EN 12390-4:2000 Testing hardened concrete - Part 4: Compressive strength; Specification for testing machines; German version EN 12390-4:2000
DIN 1996-7:1992 Testing of asphalt; determination of bulk density, compacted density, void content and degree of compaction
DIN 53134:2005 Testing of paper and board - Determination of the ring crush resistance
DIN 1945-1:1980-11 Displacement compressor; thermodynamic acceptance and performance test
DIN ISO 3384:2008 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures (ISO 3384:2005);English version of DIN ISO 3384:2008-07
DIN 18137-2:2011 Soil, investigation and testing - Determination of shear strength - Part 2: Triaxial test
DIN EN 13892-2:2003-02 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength; German version EN 13892-2:2002
DIN EN 13286-41:2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures; German version EN 13286-41:2003
DIN EN 17618:2020 Adhesives - Wood-to-wood adhesive bonds for non-structural applications - Determination of shear strength by compressive loading; German and English version prEN 17618:2020
DIN EN 17618:2022-01 Adhesives - Wood-to-wood adhesive bonds for non-structural applications - Determination of shear strength by compressive loading; German version EN 17618:2021
DIN EN 1097-11:2013-11 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates; German version EN 1097-11:2013
DIN EN ISO 5774:2016 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016)
DIN EN ISO 5774:2023-07 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2023); German version EN ISO 5774:2023
DIN 5590:1999 Compressed air equipment for rail vehicles - Pressure vessels made of steel - Dimensions, designation
DIN EN 6038:2016 Aerospace series - Fibre reinforced plastics - Test method - Determination of the compression strength after impact; German and English version EN 6038:2015
DIN SPEC 4868:2020 Sports Textiles - Measurement of Compression and Material Properties (Pressure Properties); Text in English
DIN EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008); German version EN ISO 15970:2014
DIN EN 1605:2013-05 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions; German version EN 1605:2013

CZ-CSN, Compressive Strength and Compressive Stress

CSN 72 1565 Cast.8-1985 Testing of brick clays. Determination of the compression strength
CSN 49 0110-1979 Wood. Compression strength limits parallel to the grain
CSN ON 10 5105-1965 Scrow compressors. Nooiinal outputs of compressors and ítheir pressuires.
CSN ON 10 5104-1963
CSN ISO 9895:1994 Paper and board-compressive strength-short span test
CSN 72 1163-1983 Determination of compressive strenglit of natural building slone
CSN ON 10 5102-1966 Vertical air compressors. Outputs and discharge pressures
CSN 64 5441-1976 Flexible cellular materials. Deiermin- tion of compression stress-strain cha- acteristics

Professional Standard - Light Industry, Compressive Strength and Compressive Stress

QB 1048-1991 Compression Strength Tester
QB/T 1093-1991 Determination of along-grain compressive shear strength of furniture solid wood adhesive joints

International Organization for Standardization (ISO), Compressive Strength and Compressive Stress

ISO 3386-1:1979 Flexible cellular materials — Determination of compression stress/strain characteristic and compression stress value — Part 1: Low density materials
ISO 12192:2011 Paper and board - Determination of compressive strength - Ring crush method
ISO 12192:2002 Paper and board - Compressive strength - Ring crush method
ISO/DIS 22484 Displacement and dynamic compressors — Performance test code for electric driven low-pressure air compressor packages
ISO 15970:2008 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor
ISO 6056:1980 Rubber, vulcanized — Determination of compression stress relaxation (rings)
ISO 3384:1986 Rubber, vulcanized; Determination of stress relaxation in compression at ambient and at elevated temperatures
ISO 7743:2011 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties
ISO 7743:2017 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties
ISO 12817:2013 Fibre-reinforced plastic composites - Determination of open-hole compression strength
ISO 12817:2012 Fibre-reinforced plastic composites - Determination of open-hole compression strength
ISO 7743:2004 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties
ISO 7743:1989 Rubber, vulcanized or thermoplastic; determination of compression stress-strain properties
ISO 6310:2009 Road vehicles - Brake linings - Compressive strain test methods
ISO 6310:2001 Road vehicles - Brake linings - Compressive strain test method
ISO 5941:1979 Compressors, pneumatic tools and machines; Preferred pressures
ISO 3384:1979 Rubber, vulcanized — Determination of stress relaxation in compression at normal and at elevated temperatures
ISO 5774:2016 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification
ISO 7743:2008 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties
ISO 3605:1987 Textile glass; Rovings; Determination of compressive strength of rod composites
ISO 3386-1:1986 Polymeric materials, cellular flexible; Determination of stress-strain characteristics in compression; Part 1 : Low-density materials
ISO 3386-2:1984 Polymeric materials, cellular flexible; Determination of stress-strain characteristic in compression; Part 2 : High density materials
ISO 7743:1989/Cor 1:1990 Rubber, vulcanized or thermoplastic; determination of compression stress-strain properties; technical corrigendum 1
ISO 6056:1987 Rubber, vulcanized or thermoplastic — Determination of compression stress relaxation (rings)
ISO 3787:1976 Wood; Test methods; Determination of ultimate stress in compression parallel to grain
ISO 3384:2005 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures
ISO 6238:2001 Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by compressive loading
ISO 6238:1987 Adhesives; Wood-to-wood adhesive bonds; Determination of shear strength by compression loading
ISO 6238:2018 Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by compressive loading
ISO 8573-1:2010 Compressed air - Part 1: Contaminants and purity classes
ISO 3597-3:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 3: Determination of compressive strength
ISO 3386-2:1997/Amd 1:2010 Flexible cellular polymeric materials — Determination of stress-strain characteristics in compression — Part 2: High-density materials — Amendment 1
ISO 3386-1:1986/Amd 1:2010 Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 1: Low-density materials; Amendment 1
ISO 3384:1999 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures
ISO 3384-2:2019 Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 2: Testing with temperature cycling

PL-PKN, Compressive Strength and Compressive Stress

PN S13062-1966 Determina?ion of compressive s?reng?h of glass
PN BN 7102-01-1966 Lignofol and lignostone De?ermination of toughness strength
PN D04215-1965 Lignofol and Lignostone. Determi- nation of compressive strength
PN D04216-1965 Lignofol i lignos?on Oznaczanie wytrzyma?o?ci na zginanie statyczne
PN D04217-1965 Lignofol and lignosfone Determination of shearing strength
PN D04218-1965 Lignofol and lignos?one De?ermina?ion of ?encile s?reg?h
PN D04241-1974 Plywood Determination of compressioi strength parallel to layers
PN C04289-1987 Rubber vulcanized Determination of relative damping in compression Mstress
PN D04224-1967 Lignofol and lignos?on Determination o? hardness

Group Standards of the People's Republic of China, Compressive Strength and Compressive Stress

T/CSTM 00278-2021 Ring compression test method for strength and stress-strain relationship of metallic materials
T/CSEB 0004-2018 Testing method for determining the dynamic unaxial compression strength of rock materials

Society of Automotive Engineers (SAE), Compressive Strength and Compressive Stress

SAE AIR1168/1-1990 Thermodynamics of Incompressible and Compressible Fluid Flow
SAE AIR1168/1-1989 Thermodynamics of Incompressible and Compressible Fluid Flow
SAE AIR1168/1-2011 Thermodynamics of Incompressible and Compressible Fluid Flow
SAE AMS4147-1968 ALUMINUM ALLOY FORGINGS 5.6Zn - 2.5Mg - 1.6Cu - 0.30Cr (7075-T7352) Stress Relief Compressed
SAE AMS4144-1965 ALUMINUM ALLOY HAND FORGINGS AND RINGS 6.3Cu - 0.3Mn - 0.2Zr - 0.1V - 0.1Ti (2219-T852) Stress Relief Compressed
SAE ARP510-1995 MOMENT WEIGHT OF TURBINE AND COMPRESSOR ROTOR BLADES
SAE AMS3843-1962 POLYTETRAFLUOROETHYLENE SHEET TFE Fluorocarbon Resin, Asbestos Fiber Reinforced High Compressibility
SAE AMS3843B-1986 POLYTETRAFLUOROETHYLENE SHEET Asbestos Fiber Reinforced High Compressibility, Low Density
SAE AMS3843C-1995 POLYTETRAFLUOROETHYLENE SHEET Asbestos Fiber Reinforced High Compressibility, Low Density
SAE AMS3843A-1976 POLYTETRAFLUOROETHYLENE SHEET Asbestos Fiber Reinforced High Compressibility, Low Density
SAE AMS4147C-1992 Aluminum Alloy, Forgings 5.6Zn 2.5Mg 1.6Cu 0.23Cr Solution Heat Treated, Stress Relieved by Compression, and Overaged
SAE ARP510A-2012 Moment Weight of Turbine and Compressor Rotor Blades
SAE AMS3659E-2010 Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, Sintered and Stress-Relieved
SAE J2979-2012 Test Method for Vulcanized Rubber and Thermoplastic Elastomer Determination of Compressive Stress Relaxation (CSR) Response
SAE AMS4945E-2011 Titanium Alloy Tubing, Seamless, Hydraulic 3Al 2.5V, Controlled Contractile Strain Ratio Cold Worked, Stress Relieved
SAE AMS3843C-1986 Polytetrafluoroethylene Sheet-Asbestos Fiber Reinforced High Compressibility, Low Density
SAE AMS4945B-2001 Titanium Alloy Tubing, Seamless, Hydraulic 3Al 2.5V, Controlled Contractile Strain Ratio Cold Worked, Stress Relieved
SAE AMS4945H-2020 Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Controlled Contractile Strain Ratio Cold Worked, Stress Relieved
SAE AMS4945D-2011 Titanium Alloy Tubing, Seamless, Hydraulic 3Al 2.5V, Controlled Contractile Strain Ratio Cold Worked, Stress Relieved
SAE AMS4945F-2014 Titanium Alloy Tubing, Seamless, Hydraulic, 3Al - 2.5V, Controlled Contractile Strain Ratio, Cold Worked, Stress Relieved
SAE AMS3659C-1998 Polytetrafluoroethylene Extrusions Premium Strength, Sintered and Stress-Relieved

National Metrological Verification Regulations of the People's Republic of China, Compressive Strength and Compressive Stress

JJG(粤) 018-2014 Compression Strength Tester for Board
JJG(化工) 108-1991 Verification rules for rubber compressive stress relaxation instrument

TR-TSE, Compressive Strength and Compressive Stress

TS 2029-1975 DETERMINATION OF TRIAXIAL COMPRESSIVE STRENGTH
TS 3114-1978 Determination Of Compressive Strength Of Concrete Test Specimens
TS 3260-1978 DETERMINATION OF COMPRESSIVE STRENGTH OF CONCRETE BY SURFACE HARDNESS METHOD

National Aeronautics and Space Administration (NASA), Compressive Strength and Compressive Stress

NASA NACA-TR-646-1939 The compressibility burble and the effect of compressibility on pressures and forces acting on an airfoil
NASA NACA-TN-2924-1953 Combined-stress fatigue strength of 76S-T61 aluminum alloy with superimposed mean stresses and corrections for yielding
NASA NACA-ACR-L5G31-1945 A simple method for estimating terminal velocity including effect of compressibility on drag

Japanese Industrial Standards Committee (JISC), Compressive Strength and Compressive Stress

JIS K 6400-2:2012 Flexible cellular polymeric materials -- Physical properties -- Part 2: Determination of hardness (indentation technique) and stress-strain characteristics in compression
JIS M 0302:2000 Method of test for compressive strength of rock
JIS M 0302:1975 Method of test for compressive strength of rock
JIS K 6400-2:2004 Flexible cellular polymeric materials -- Determination of the physical properties -- Part 2: Hardness (indentation technique) and stress-strain characteristics in compression
JIS R 1608:2003 Testing methods for compressive strength of fine ceramics
JIS R 1608:1990 Testing methods for compressive strength of high performance ceramics
JIS B 8346:1991 Fans, blowers and compressors -- Determination of A-weighted sound pressure level
JIS A 1107:2002 Method of sampling and testing for compressive strength of drilled cores of concrete
JIS A 1107:2012 Method of sampling and testing for compressive strength of drilled cores of concrete
JIS K 6852:1994 Testing methods for shear strength of adhesive bonds by compression loading
JIS B 7721:2009 Tension/compression testing machines -- Verification and calibration of the force-measuring system
JIS B 7721:2018 Tension/compression testing machines -- Calibration and verification of the force-measuring system
JIS B 8392-1:2003 Compressed air -- Part 1: Contaminants and purity classes
JIS B 8392-1:2012 Compressed air.Part 1: Contaminants and purity classes
JIS B 7721:2002 Verification and calibration of the force measuring system of the tension/compression testing machines

Korean Agency for Technology and Standards (KATS), Compressive Strength and Compressive Stress

KS M 1424-2009 Testing method for compressive properties of media for water treatment
KS M ISO 12192:2004 Paper and board-Compressive strength(Ring crush method)
KS L 3115-1-2010 Testing method for cold compressive strength of refractory bricks-Part 1:Test without packing
KS L 3115-2-2012 Testing method for cold compressive strength of refractory bricks-Part 2:Test with packing
KS L 3115-1-2015 Testing method for cold compressive strength of refractory bricks — Part 1: Test without packing
KS F 2314-2013 Standard test method for unconfined compression test of soils
KS M 3721-2008 Testing methods for strength properties of adhesives in shear by compression loading
KS D ISO 5951:2004 Hot-rolled steel sheet of higher yield strength with improved formability
KS L 5105-2007 Testing method for compressive strength of hydraulic cement mortar
KS D ISO 5951:2013 Hot-rolled steel sheet of higher yield strength with improved formability
KS M 3721-1987 Testing methods for strength properties of adhesives in shear by compression loading
KS L 5105-1987 Testing method for compressive strength of hydraulic cement mortar
KS M ISO 12192:2020 Paper and board — Determination of compressive strength Ring crush method
KS M ISO 12192:2014 Paper and board — Determination of compressive strength — Ring crush method
KS L 3305-2012 Testing method for compressive strength of insulating fire bricks
KS L 3305-1982 Testing method for compressive strength of insulating fire bricks
KS L 3305-1987 Testing method for compressive strength of insulating fire bricks
KS I ISO 15970:2010 Natural gas-Measurement of properties-Volumetric properties: density, pressure, temperature and compression factor
KS I ISO 15970-2010(2021) Natural gas－Measurement of properties－Volumetric properties: density, pressure, temperature and compression factor
KS I ISO 15970-2010(2016) Natural gas－Measurement of properties－Volumetric properties: density, pressure, temperature and compression factor
KS M ISO 7743:2011 Rubber, vulcanized or thermoplastic-Determination of compression stress-strain properties
KS M ISO 7743:2016 Rubber, vulcanized or thermoplastic－Determination of compression stress-strain properties
KS M 7051-1997(2002) TESTING METHOD FOR RING CRUSH OF PAPERBOARD
KS M 3721-2008(2013) Testing methods for strength properties of adhesives in shear by compression loading
KS M 7051-1982 TESTING METHOD FOR RING CRUSH OF PAPERBOARD
KS R ISO 6310:2008 Road vehicles-Brake linings-Compressive strain test method
KS R ISO 6310:2014 Road vehicles — Brake linings — Compressive strain test methods
KS M 6785-2009 Testing methods of stress-strain properties at low deformation for vulcanized rubber
KS M ISO 3384:2007 Rubber, vulcanized or thermoplastic-Determination of stress relaxation in compression at ambient and at elevated temperatures
KS M ISO 3384:2014 Rubber, vulcanized or thermoplastic-Determination of stress relaxation in compression at ambient and at elevated temperatures
KS B ISO 8573-1-2003(2008) Compressed air－Contaminants and purity classes
KS M ISO 7743-2016(2021) Rubber, vulcanized or thermoplastic－Determination of compression stress-strain properties
KS M ISO 7743:2022 Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties
KS L 1601-2006 Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for compressive strength of monolithicceramics at room temperature
KS M ISO 14126:2012 Fibre-reinforced plastic composites－Determination of compressive properties in the in-plane direction
KS M ISO 3386-1:2013 Polymeric materials, cellular flexible-Determination of stress-strain characteristics in compression-Part 1:Low-density materials
KS M ISO 3386-2:2013 Flexible cellular polymeric materials-Determination of stress-strain characteristics in compression-Part 2:High-density materials
KS M ISO 3386-1:2008 Polymeric materials, cellular flexible-Determination of stress-strain characteristic in compression-Part 1:Low-density materials
KS M ISO 3386-2:2008 Flexible cellular polymeric materials-Determination of stress-strain characteristics in compression-Part 2:High-density materials
KS M ISO 3386-1:2018 Polymeric materials, cellular flexible — Determination of stress-strain characteristics in compression — Part 1: Low-density materials
KS F 2346-2017 Testing method for unconsolidated, undrained strength of cohesive soils in triaxial compression
KS F 2346-1982 Testing method for unconsolidated, undrained strength of cohesive soils in triaxial compression
KS M ISO 3386-2:2018 Flexible cellular polymeric materials — Determination of stress-strain characteristics in compression — Part 2: High-density materials
KS B ISO 8573-1:2003 Compressed air-Contaminants and purity classes
KS B ISO 8573-1:2013 Compressed air-Contaminants and purity classes
KS L ISO 10059-2:2013 Dense, shaped refractory products — Determination of cold compressive strength — Part 2: Test with packing
KS M ISO 6238:2008 Adhesives-Wood-to-wood adhesive bonds-Determination of shear strength by compression loading
KS M ISO 6238:2013 Adhesives — Wood-to-wood adhesive bonds-Determination of shear strength by compression loading
KS F 2346-2022 Test method for unconsolidated undrained strength of cohesive soils in triaxial compression test
KS L ISO 10059-2-2013(2018) Dense, shaped refractory products — Determination of cold compressive strength — Part 2: Test with packing
KS M ISO 3597-3:2012 Textile-glass-reinforced plastics-Determination of mechanical properties on rods made of roving-reinforced resin-Part 3:Determination of compressive strength
KS M ISO 3384-2:2014 Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 2: Testing with temperature cycling
KS M ISO 3384-2-2014(2019) Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 2: Testing with temperature cycling

American National Standards Institute （ANSI), Compressive Strength and Compressive Stress

ANSI/TAPPI T826 om-2013 Short span compressive strength of containerboard

RU-GOST R, Compressive Strength and Compressive Stress

GOST 23775-1979 Carbon products. Methods of determination for compressive, bend, tensile, strengths (diametral compression)
GOST 9982-1976 Rubber. Determination of stress relaxation in compression
GOST 26605-1993 Polymeric materials cellular flexible. Determination of stress-strain characteristics in compression and compression stress
GOST 10393-2014 Compressors, electrically driven compressor sets and compressor units for the railway rolling stock. General specifications
GOST 30358-1996 Synthetic highbulky fabrics. Determination of compressive strength test
GOST 26798.2-1996 I-G and I-H well cement. Test methods
GOST 26798.2-1985 Oil-well cements. Test methods of strength limits in bending and compression
GOST ISO 7743-2013 Rubberorthermoplastic. Determination of compression stress-strain properties
GOST 21554.3-1982 Sawn timber and blanks. Method for control of strength at bending, tension and compression
GOST 25.503-1997 Design calculation and strength testing. Methods of mechanical testing of metals. Method of compression testing
GOST 4071.2-1994 Insulating refractory products. Determination of cold compressive strength
GOST 29234.4-1991 Moulding sands. Method for determination of compressive strength in damp state
GOST 25.503-1980 Strength calculation and testing. Methods of mechanical testing of metals. Methods of compression tests
GOST 4071.2-2021 Insulating refractory products. Determination of cold compressive strength at room temperature
GOST R ISO 8573-1-2016 Compressed air. Part 1. Contaminants and purity classes
GOST 33844-2016 Polymer composites. Test method for determination of compression-after-impact strength of carbon-fibre-reinforced laminates
GOST 9550-1981 Plastics. Methods for determination of elasticity modulus at strength, compression and bending

Standard Association of Australia （SAA）, Compressive Strength and Compressive Stress

AS 1289.6.4.2:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a saturated specimen tested in undrained triaxial compression with measurement of pore
AS 1289.6.4.1:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a specimen tested in undrained triaxial compression without measurement of pore water p
ATS 5200.461-2004 Technical Specification for plumbing and drainage products - Stainless steel tubes and mechanical compression fittings for pressure applications
AS 2498.3:1993 Methods of testing rigid cellular plastics - Determination of compressive stress
AS 1012.9:1999 Methods of testing concrete - Determination of the compressive strength of concrete specimens
AS 4133.4.2:1993 Methods of testing rocks for engineering purposes - Rock strength tests - Determination of uniaxial compressive strength
AS 4133.4.3.2:2013
AS 4133.4.3.1:2009

ES-AENOR, Compressive Strength and Compressive Stress

UNE 56-542-1988

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Compressive Strength and Compressive Stress

GB/T 2679.10-1993 paper and board. Compressive strength. Short span test
GB/T 1964-1996 Test method for crushing strength of porous ceramic
GB/T 8489-2006 Test method for compressive strength of fine ceramics (advanced ceramics,advanced technical ceramics)
GB/T 8489-1987 Testing method for compressive (crushing) strength of hing performance ceramics
GB 7786-1987 Limits of sound power level for noise emitted by air compressors (for power source use) and diaphragm compressors
GB/T 6525-1986 Sintered metal materials--Determination of compression strength at room temperature
GB/T 11106-1989 Metallic powder--Determination of green strength by compression of cylinder compacts
GB/T 11177-1989 Testing method for compressive shear strength of dowel joint by inorganic adhesives
GB 11177-1989 Inorganic adhesive socket compression scissors strength test method
GB/T 42910-2023 Test method for high temperature compressive shear strength of inorganic adhesives
GB/T 1685-1982 Rubber vulcanized--Determination of stress relaxation in compression at normal and elevated temperature
GB/T 17517-1998 Adhesives--Wood to wood adhesive bonds--Determination of shear strength by compression loading
GB/T 7757-1993 Rubber,vulcanized or thermoplastic.Determination of compression stress-strain properties
GB/T 7757-2009 Rubber,vulcanized or thermoplastic—Determiantion of compression stress-strain properties
GB/T 7757-2009 Rubber,vulcanized or thermoplastic—Determiantion of compression stress-strain properties
GB/T 7757-2009"> Rubber,vulcanized or thermoplastic—Determiantion of compression stress-strain properties
GB/T 18942.1-2003 Polymeric materials,cellular flexible--Determination of stress--strain characteristic in compression--Part 1: Low--density materials
GB/T 18942.2-2003 Flexible cellular polymeric materials--Determination of stress-strain characteristicsin compression--Part 2: High density maternals
GB/T 9327.5-1988 Test methods for compression and mechanical connectorsfor conductors of power cables--Method of tensile strength testing
GB/T 14209-1993 Textile glass--Rovings--Determination of compressive strength of rod composites

IT-UNI, Compressive Strength and Compressive Stress

SAE - SAE International, Compressive Strength and Compressive Stress

SAE AIR1168/1A-2019 Thermodynamics of Incompressible and Compressible Fluid Flow
SAE AMS3843C-1991 Polytetrafluoroethylene Sheet Asbestos Fiber Reinforced High Compressibility@ Low Density
SAE AMS3843D-2014 Polytetrafluoroethylene Sheet Asbestos Fiber Reinforced High Compressibility@ Low Density
SAE ARP510A-2001 Moment Weight of Turbine and Compressor Rotor Blades
SAE ARP510-1959 Moment Weight of Turbine and Compressor Rotor Blades
SAE ARP510B-2019 Moment Weight of Turbine and Compressor Rotor Blades

Taiwan Provincial Standard of the People's Republic of China, Compressive Strength and Compressive Stress

CNS 13959-1997 Method of test for compressive strength of fine ceramics
CNS 12107-1987 Method of Test for Flat Crush of Corrugating Medium ( CMT Test )
CNS 12384-1988 Method of Test for Unconfined Compressive Strength of Cohesive Soil
CNS 3511-1991 Method of Test for Compression Strength of Corrugated Paperboard Containers
CNS 5809-1980 Methods of Test for Strength Properties of Adhesives in Shear by Compression Loading

GOSTR, Compressive Strength and Compressive Stress

GOST 26605-2017 Cellular flexible polymeric materials. Determination of stress-strain characteristics in compression and compression stress
GOST 12248.2-2020 Soils. Deformation of strength parameters by unconfined compression testing
GOST 12248.3-2020 Soils. Determination of strength and deformation parameters by triaxial compression testing

VN-TCVN, Compressive Strength and Compressive Stress

TCVN 4032-1985 Cements.Test methods of bending and compression strengths
TCVN 6813-2001 Measurement of static and low dynamic tension and compressive force by means of a strain gauge technique

ESDU - Engineering Sciences Data Unit, Compressive Strength and Compressive Stress

ESDU 74038 A-1983 Effect of an axial compressive mean stress on the fatigue strength of aluminium alloy bar (plain and notched).
STRUCT 02.04.02 A-1973 Average and edge stresses for flat plates under shear and compression.
ESDU 83002-1982 Allowable stresses for helical compression and tension springs of round wire.
STRUCT 02.04.01 A-1976 Buckling stress ratios for plates under uniform compression and shear.
ESDU 70002 A-1973 Buckling stress ratios for flat plates under shear and non-uniform compression.
ESDU 82008 B-1991 Elastic stresses and deflections of helical compression and tension springs of round wire.
ESDU 67008-1967 Elastic stresses in single lap joints under tension or compression
STRUCT 02.01.49 A-1979 Buckling stress coefficients for flat rectangular plates tapered in thickness@ under compression.
STRUCT 02.01.34 B-1974 Estimation of the initial buckling stress under uniaxial compression of a skin with integral unflanged stiffeners.
CFD-BMK 07009-2007 CFD Benchmarks for predicting pressure loss and flow characteristics. Incompressible flow in sudden contractions.
STRUCT 02.01.37 B-1974 Estimation of the initial buckling stress under uniaxial compression of a corrugated sandwich panel.
STSTSW-2007 Stress and Strength Series - Software.
ESDU 83034 A-1988 Elastic local buckling stresses of thin-walled unstiffened circular cylinders under combined axial compression and internal pressure.
CFD-BPG 07008-2007 CFD Best Practice Guidelines for modelling pressure loss and flow characteristics. Incompressible flow in sudden contractions.
ESDU 73015 A-1975 Estimation of the local buckling stress under biaxial compression of an isotropic skin with fibre reinforced integral unflanged stiffeners.
STRUCT 02.01.35 B-1974 Estimation of the initial buckling stress under uniaxial compression of a skin with Z-section stringers.
ESDU 69003 A-1970 The buckling of flat plates under non-uniform compression. Symmetric distributions due to initial or thermal stress.
SS1 E-1990 Guide to the use of the Stress and Strength Series.

PT-IPQ, Compressive Strength and Compressive Stress

E 156-1964

NATO - North Atlantic Treaty Organization, Compressive Strength and Compressive Stress

STANAG 3624-1998 Characteristics of Oil-Free Compressed Nitrogen@ Supply Pressure and Hoses (ED 3)
STANAG 3624-1989 Characteristics of Oil Free Compressed Nitrogen@ Supply Pressure and Hoses (ED 2 AMD 2)
STANAG 3054-1973 Characteristics of Compressed Air for Technical Purposes@ Supply Pressure and Hoses (ED 4 AMD 4 March 1996; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32
STANAG 3054-1989 Characteristics of Compressed Air for Technical Purposes@ Supply Pressure and Hoses (ED 5 AMD 1 March 1996; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32

Association Francaise de Normalisation, Compressive Strength and Compressive Stress

NF Q03-125*NF ISO 12192:2011 Paper and board - Determination of compressive strength - Ring crush method
NF EN ISO 15970:2014 Gaz naturel - Mesurage des caractéristiques - Caractéristiques volumétriques : masse volumique, pression, température et facteur de compression
NF P18-650-11*NF EN 1097-11:2013 Tests for mechanical and physical properties of aggregates - Part 11 : determination of compressibility and confined compresssive strength of lightweight aggregates
NF T48-107:1994 ASBESTOS AND RUBBER COMPRESSED SHEETS FOR SEALS. RESISTANCE TO HYDRAULIC PRESSURE AT AMBIENT TEMPERATURE.
NF X20-517*NF EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties : density, pressure, temperature and compression factor
NF T48-103:1994 Asbestos and rubber compressed sheets for seals. Determination of tensile strength.
NF T48-108:1994 Asbestos and rubber compressed sheets for seals. Determination of bending resistance.
NF T47-254*NF EN ISO 5774:2016 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification
NF B10-614*NF EN 1926:2007 Natural stone test methods - Determination of uniaxial compressive strength
NF T46-043:1983 Vulcanized rubber. Determination of compression stress relaxation at normal and elevated temperatures (annular test-pieces).
NF T46-062:2012 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties.
NF T46-044:1983 Vulcanized rubber. Determination of compression stress relaxation at normal and elevated temperatures (cylindrical test-pieces).
NF P18-455:2003 Testing hardened concrete - Part 3 : compressive strength of test specimens.
NF P18-430-3:2012 Testing hardened concrete - Part 3 : compressive strength of test specimens.
NF EN IEC 62677-3-101:2018 Profilés thermorétractables basse et moyenne tensions Partie 3 : spécification pour matériaux particuliers - Feuille 101 : profilés thermorétractables en polyoléfine pour applications basse tension
NF T46-062*NF ISO 7743:2018 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties
NF ISO 7743:2018 Caoutchouc vulcanisé ou thermoplastique - Détermination des propriétés de contrainte/déformation en compression
NF EN ISO 5774:2016 Tuyaux en plastique - Types armés de textile pour applications avec de l'air comprimé - Spécifications
FD E29-760:2014 Gaz cylinders - Fatigue srength testing under repeated pressurizing for liquefied or dissolved compressed gases
NF EN 17618:2021 Adhésifs - Joints collés de bois à bois à usages non structuraux - Détermination de la résistance au cisaillement par effort de compression
NF T48-106:1994 ASBESTOS AND RUBBER COMPRESSED SHEETS FOR SEALS. BREAKING STRENGTH AFTER LIQUID IMMERSION.
NF EN IEC 62677-3-103:2019 Profilés thermorétractables basse et moyenne tensions - Partie 3 : spécification pour matériaux particuliers - Feuille 103 : profilés thermorétractables conducteurs en polyoléfine pour applications moyenne tension
NF EN 12576:1998 Plastiques - Composites renforcés de fibres - Préparation de plaques d'essais de SMC, BMC et DMC par moulage par compression.
NF EN 13892-2:2003 Méthodes d'essai des matériaux pour chapes - Partie 2 : détermination de la résistance à la flexion et à la compression
NF P98-846-41*NF EN 13286-41:2003 Unbound and hydraulically bound mixtures - Part 41 : test method for the determination of the compressive strength of hydraulically bound mixtures.
NF T76-094*NF EN 17618:2021 Adhesives - Wood-to-wood adhesive bonds for non- structural applications - Determination of shear strength by compressive loading
NF EN ISO 3386-2:1998 Matériaux polymères alvéolaires souples - Détermination de la caractéristique de contrainte-déformation relative en compression - Partie 2 : matériaux à masse volumique élevée
NF ISO 1268-8:2004 Plastiques renforcés de fibres - Méthodes de fabrication de plaques d'essai - Partie 8 : moulage par compression des SMC et BMC
NF P19-118:1997 Determination of compressive strength of lightweight aggregate concrete with open structure.
NF L17-468*NF EN 6038:2017 Aerospace series - Fibre reinforced plastics - Test method - Determination of the compression strength after impact
NF E49-330-1*NF ISO 6953-1:2015 Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 1 : main characteristics to be include in literature from suppliers and product-marking requirements
NF T57-160-3*NF ISO 3597-3:2004 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 3 : determination of compressive strength
NF EN ISO 3386-1:1998 Matériaux polymères alvéolaires souples - Détermination de la caractéristique de contrainte-déformation relative en compression - Partie 1 : matériaux à basse masse volumique.
NF ISO 4666-3:2023 Caoutchouc vulcanisé - Détermination de l'élévation de température et de la résistance à la fatigue dans les essais aux flexomètres - Partie 3 : flexomètre à compression (type à déformation constante)
NF C26-277-3-101*NF EN IEC 62677-3-101:2018 Heat-shrinkable low and medium voltage moulded shapes - Part 3 : specification for individual materials - Sheet 101 : heat-shrinkable, polyolefin moulded shapes for low voltage applications
NF P12-311:2000 Methods of test for mortar for masonry - Part 11 : determination of flexural and compressive strength of hardened mortar.
NF T56-110-2/A1*NF EN ISO 3386-2/A1:2010 Flexible cellular polymeric materials - Dermination of stress-strain characteristics in compression - Part 2 : high-density materials - Amendment 1.
NF T56-110-1/A1*NF EN ISO 3386-1/A1:2010 Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 1 : low-density materials - Amendment 1.
NF T48-102:1994 ASBESTOS AND RUBBER COMPRESSED SHEETS FOR SEALS. DETERMINATION OF DENSITY.

API - American Petroleum Institute, Compressive Strength and Compressive Stress

API REPORT 07714-CAP-1998 Strength of Simple Joints - Effect of Chord Stress and Diameter-to-Thickness Ratio on the Static Strength of DT Tubular Joints Loaded in Brace Compression

Professional Standard - Aerospace, Compressive Strength and Compressive Stress

QJ 1634A-1996 Test method for compressive shear strength of adhesives

National Metrological Technical Specifications of the People's Republic of China, Compressive Strength and Compressive Stress

JJF(石化)040-2020 Calibration Specification for Rubber Stress Relaxation Apparatuses
JJF(石化) 040-2020 Calibration specification for rubber compressive stress relaxation instrument

British Standards Institution (BSI), Compressive Strength and Compressive Stress

BS EN 12808-3:2008 Grouts for tiles - Determination of flexural and compressive strength
BS ISO 15970:2008 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor
BS EN ISO 15970:2014 Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor
BS EN 16210:2013 Transportation loads. Measurement and evaluation of climatic and other loads. Data acquisition and general requirements for measuring equipment
BS ISO 12817:2013 Fibre-reinforced plastic composites. Determination of open-hole compression strength
BS EN 1052-1:1999 Methods of test for masonry - Determination of compressive strength
BS EN 17224:2019 Determination of compressive shear strength of wood adhesives at elevated temperatures
23/30429595 DC BS ISO 22484. Displacement and dynamic compressors. Performance test code for electric driven low-pressure air compressor packages
BS ISO 7743:2011 Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
BS EN ISO 3386-1+A1:1998 Polymeric materials, cellular flexible. Determination of stress-strain characteristics in compression. Low-density materials
BS EN ISO 3386-1:1997+A1:2010 Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Low-density materials
BS ISO 8573-1:2010 Compressed air - Contaminants and purity classes
BS EN ISO 3386-2:1998+A1:2010 Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - High-density materials
BS EN 1097-11:2013 Tests for mechanical and physical properties of aggregates. Determination of compressibility and confined compressive strength of lightweight aggregates
BS ISO 3597-3:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of compressive strength
BS ISO 3384:2000 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures
BS ISO 20975-1:2023 Fibre-reinforced plastic composites. Determination of laminate of through-thickness properties - Direct tension and compression tests
BS ISO 3384-1:2011+A1:2013 Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression. Testing at constant temperature
BS EN 17618:2021 Adhesives. Wood-to-wood adhesive bonds for non-structural applications. Determination of shear strength by compressive loading
BS EN IEC 62677-3-101:2018 Heat-shrinkable low and medium voltage moulded shapes. Specification for individual materials. Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications
BS EN 6038:2015 Aerospace series. Fibre reinforced plastics. Test method. Determination of the compression strength after impact
BS 7672:1993 Specification for compression, stiffness and labelling of anti-embolism hosiery
BS ISO 7743:2017 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
BS EN IEC 62677-3-103:2019 Heat-shrinkable low and medium voltage moulded shapes. Specification for individual materials. Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applications
17/30360673 DC BS EN 17150. Plastics piping systems for non-pressure underground conveyance and storage of non-potable water. Test method for determination of short term compression strength of boxes
22/30446510 DC BS EN ISO 5774. Plastics hoses. Textile-reinforced types for compressed-air applications. Specification
BS ISO 3384-2:2019 Rubber, vulcanized or thermoplastic — Determination ofstress relaxation in compression Part 2 : Testing with temperature cycling
BS ISO 6238:2018 Adhesives. Wood-to-wood adhesive bonds. Determination of shear strength by compressive loading

KR-KS, Compressive Strength and Compressive Stress

KS M ISO 12192-2020 Paper and board — Determination of compressive strength Ring crush method
KS M ISO 7743-2022 Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties
KS M ISO 7743-2016 Rubber, vulcanized or thermoplastic－Determination of compression stress-strain properties
KS M ISO 3386-1-2018 Polymeric materials, cellular flexible — Determination of stress-strain characteristics in compression — Part 1: Low-density materials
KS M ISO 3386-2-2018 Flexible cellular polymeric materials — Determination of stress-strain characteristics in compression — Part 2: High-density materials
KS D ISO 14317-2012 Sintered metal materials excluding hardmetals－Determination of compressive yield strength

American Society for Testing and Materials (ASTM), Compressive Strength and Compressive Stress

ASTM C1194-18 Standard Test Method for Compressive Strength of Architectural Cast Stone
ASTM C1194-91(1995) Standard Test Method for Compressive Strength of Architectural Cast Stone
ASTM C1194-19 Standard Test Method for Compressive Strength of Architectural Cast Stone
ASTM C364/C364M-06 Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
ASTM C364/C364M-16 Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
ASTM D945-06 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM D945-06(2012) Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM D945-16 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM R0084 Ring Crush of Paperboard (This is not an ASTM standard; available as PDF, only)
ASTM C495/C495M-12 Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
ASTM D945-92(1997) Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM D945-92(2001)e1 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM C773-88(1999) Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
ASTM C773-88(2011) Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
ASTM C773-88(2020) Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
ASTM C773-88(2016) Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
ASTM C839-82(2005) Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
ASTM C839-82(2010) Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
ASTM D6147-97 Test Method for Vulcanized Rubber and Thermoplastic Elastomer-Determination of Force Decay (Stress Relaxation) in Compression
ASTM D6683-19 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
ASTM D8289-19 Standard Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite
ASTM D905-98 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM D5202-91(1997) Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
ASTM D8287/D8287M-22 Standard Test Method for Compressive Residual Strength Properties of Damaged Sandwich Composite Panels
ASTM D5202/D5202M-16 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemically Grouted Soils
ASTM D8289-20 Standard Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite
ASTM D4219-08 Standard Test Method for Unconfined Compressive Strength Index of Chemical-
Grouted Soils

Professional Standard - Machinery, Compressive Strength and Compressive Stress

JB/T 9141.3-1999 Test method for compressive strength of flexible graphite sheets
JB/T 9141.3-2013 Flexible graphite sheets.Part 3: Test method for compressive strength
JB/T 3165-1999 Thermodynamic performance test for centrifugal&axial blower and compressor

AENOR, Compressive Strength and Compressive Stress

UNE 83508:2004 Concrete with fibers. Determination of the index of tenacity in compression.
UNE 40402:1981 COMPRESSING STRENGHT AND ELASTIC RECOVERY OF TEXTILE FLOOR COVERINGS THICKNESS
UNE-EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008)
UNE 56535:1977 PHYSICAL-MECHANICAL CHARACTERISTICS OF WOOD. DETERMINATION OF AXIAL COMPRESSION STRENGH.
UNE 137002:2003 Corrugated fibreboard packaging. Determination of the manufacturers joint strength. Comprenssion method.
UNE-EN 1097-11:2013 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates
UNE-EN ISO 3386-2:1999 FLEXIBLE CELLULAR POLYMERIC MATERIALS. DETERMINATION OF STRESS-STRAIN CHARACTERISTICS IN COMPRESSION. PART 2: HIGH-DENSITY MATERIALS. (ISO 3386-2:1997).

HU-MSZT, Compressive Strength and Compressive Stress

Military Standard of the People's Republic of China-General Armament Department, Compressive Strength and Compressive Stress

GJB 772.112-1993 Explosives Test Method Compressive Stress-Strain Curve Determination
GJB 8683.14-2015 Test methods for physical parameters of pyrotechnics Part 14: Compression method for determination of compressive strength

国家市场监督管理总局、中国国家标准化管理委员会, Compressive Strength and Compressive Stress

GB/T 39519-2020 Hydranlic cylindrically helical compression spring with high working stress—Technical specifications
GB/T 6525-2019 Determination of compression strength for sintered metal materials at room temperature
GB/T 11106-2022 Metallic powder—Determination of green strength by compression of cylinder compacts
GB/T 37782-2019 Metallic materials—Indentation test—Determination of strength, hardness and stress-strain curve

European Committee for Standardization (CEN), Compressive Strength and Compressive Stress

EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density@ pressure@ temperature and compression factor
EN 772-1:2011 Methods of test for masonry units - Part 1: Determination of compressive strength (Incorporates Amendment A1: 2015)
EN 772-1:2000 Methods of Test for Masonry Units - Part 1: Determination of Compressive Strength
EN 13892-2:2002 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength
EN 13286-41:2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
EN 13286-41:2021 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
FprEN 17618-2021 Adhesives - Wood-to-wood adhesive bonds for non-structural applications - Determination of shear strength by compressive loading
FprEN ISO 5774 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2023)
EN ISO 5774:2023 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2023)

Danish Standards Foundation, Compressive Strength and Compressive Stress

DS/ISO 3384:1989 Rubber, vulcanized. Determination of stress relaxation in compression at ambient and at elevated temperatures
DS/EN ISO 5774:2008 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification
DS/ISO 6056:1989 Rubber, vulcanized or thermoplastic — Determination of compression stress relaxation (rings)
DS/EN ISO 3386-2/A1:2010 Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials
DS/EN ISO 3386-2:1999 Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials
DS/EN ISO 3386-1/A1:2010 Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 1: Low-density materials
DS/EN ISO 3386-1:1998 Polymeric materials, cellular flexible - Determination of stress-strain characteristic in compression - Part 1: Low-density materials
DS/ISO 8573-1:2010 Compressed air - Part 1: Contaminants and purity classes

BE-NBN, Compressive Strength and Compressive Stress

NBN-ISO 5941:1989 Compressors, pneumatic tools and machines - Preferred pressures
NBN I-895-1968
NBN T 31-042-1980 Rubber, vulcanized - Determination of stress relaxation in com-pression
NBN T 31-042-1985 Rubber, vulcanized - Deermination of stress relaxation in com-pression

Indonesia Standards, Compressive Strength and Compressive Stress

SNI 03-6430.1-2000 Test methods for compressive strength of grouts for preplaced-aggregate concrete in the laboratory
SNI 03-6798-2002 Procedure for test specimen production and treatment for compressive and tensile strength laboratory test of soil-cement

ZA-SANS, Compressive Strength and Compressive Stress

SANS 5863:2006 Concrete tests - Compressive strength of hardened concrete
SANS 5872:2008 Compression set of vulcanized rubbers under constant deflection
SANS 7743:2003 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties

Professional Standard - Aviation, Compressive Strength and Compressive Stress

HB 5239-1983 Test method for compressive stress relaxation of rubber O-rings
HB 5434.5-1989 Test method for compressive strength of aircraft wheel brake materials

SE-SIS, Compressive Strength and Compressive Stress

SIS SS-ISO 7743:1992 Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties
SIS SS-ISO 3384:1990 Rubber, vulcanized — Determination of stress relaxation in compression at ambient and at elevated temperatures

Professional Standard - Building Materials, Compressive Strength and Compressive Stress

JC/T 262-1993 Performance test method for cast stone products. Compression strength test
JC 362-1985 Test method for water pressure stress strength of cast stone straight pipe

BR-ABNT, Compressive Strength and Compressive Stress

ABNT NBR 15087-2012 Asphalt mixtures - Determination of tensile strength by diametral compression

Professional Standard - Military and Civilian Products, Compressive Strength and Compressive Stress

WJ 745-1994 Test method for compressive shear strength of adhesives for optical instruments

ES-UNE, Compressive Strength and Compressive Stress

UNE-EN 17224:2020 Determination of compressive shear strength of wood adhesives at elevated temperatures
UNE-ISO 7743:2016 Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
UNE-EN ISO 5774:2016 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016)
UNE-EN IEC 61238-1-3:2020/A11:2020 Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 36 kV (Um = 42 kV) tested on non-insulated co...
UNE-EN IEC 61238-1-3:2020 Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 36 kV (Um = 42 kV) tested on non-insulated co...
UNE-EN 17618:2022 Adhesives - Wood-to-wood adhesive bonds for non-structural applications - Determination of shear strength by compressive loading
UNE-EN 6038:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of the compression strength after impact (Endorsed by AENOR in January of 2016.)

Professional Standard - Chemical Industry, Compressive Strength and Compressive Stress

HG/T 4456-2012 Plastics.Determination of exudation of plasticizers under compression

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), Compressive Strength and Compressive Stress

ARI 500-2000 Variable Capacity Positive Displacement Refrigerant Compressors and Compressor Units for Air-Conditioning and Heat Pump Applications

YU-JUS, Compressive Strength and Compressive Stress

JUS G.S2.147-1990 Rubber, vulcanized. Determination of stress relaxation in compression at. ambient and at elevated temperatures

IN-BIS, Compressive Strength and Compressive Stress

IS 13975-1994 Axial (end -to-end ) compression strength of composite cans, tubes and cores - method of test

GM Global, Compressive Strength and Compressive Stress

GMW 14164-2012 Torque, Tension, Angle, and Compression Evaluation of Fastened Joints Issue 2; English

CEN - European Committee for Standardization, Compressive Strength and Compressive Stress

PREN 17224-2018 Determination of compressive shear strength of wood adhesives at elevated temperatures

轻工业部, Compressive Strength and Compressive Stress

QB 1093-1991 Determination of along-grain compression and shear strength of furniture solid wood glue joints

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Compressive Strength and Compressive Stress

ASHRAE 4006-1996 Simplified Relationships for the Enhancement and Compressibility Factors of Moist Air

未注明发布机构, Compressive Strength and Compressive Stress

NF T56-110-1*NF EN ISO 3386-1:1998 Polymeric materials, cellular flexible. Determination of stress-strain characteristic in compression. Part 1 : low-density materials.
DIN EN 1015-11:1999 Test method for mortar for masonry DIN Part 11: Determination of bending tensile and compressive strength

The American Road & Transportation Builders Association, Compressive Strength and Compressive Stress

AASHTO T 296-1995 Standard Method of Test for Unconsolidated, Undrained Compressive Strength of Cohesive Soils in Triaxial Compression HM-22; Part IIA R(2000)
AASHTO T 296-2010 Standard Method of Test for Unconsolidated, Undrained Compressive Strength of Cohesive Soils in Triaxial Compression

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Compressive Strength and Compressive Stress

GJB 5382.14-2005 Test methods of physical parameter for pyrotechnic. Part 14: Determination of crushing strength Compression method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Compressive Strength and Compressive Stress

GB/T 35160.3-2017 Test methods for agglomerated stone—Part 3：Determination of compressive strength

Professional Standard - Geology, Compressive Strength and Compressive Stress

DZ/T 0276.20-2015 Regulation for testing the physical and mechanical properties of rock.Part 20:Test for determining the strength of rock in triaxial compression

Compressed Gas Association (U.S.), Compressive Strength and Compressive Stress

CGA P-29-2010 Application of OSHA PSM and EPA RMP to the compressed gas industry

Professional Standard - Agriculture, Compressive Strength and Compressive Stress

NY/T 1255-2006 Test of explosion for pyrotechnics. Brisance test method with plumbum pole compression

WRC - Welding Research Council, Compressive Strength and Compressive Stress

BULLETIN 406-1995 PROPOSED RULES FOR DETERMINING ALLOWABLE COMPRESSIVE STRESSES FOR CYLINDERS@ CONES@ SPHERES AND FORMED HEADS
BULLETIN 360-1991 STRESS INDICES@ PRESSURE DESIGN AND STRESS INTENSIFICATION FACTORS FOR LATERALS IN PIPING

CU-NC, Compressive Strength and Compressive Stress

NC 54-032-1985 Construction Materials and Products Natural Rock. Determination of Compressive Strength

International Electrotechnical Commission (IEC), Compressive Strength and Compressive Stress

IEC 62677-3-103:2019 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applicatio

AASHTO - American Association of State Highway and Transportation Officials, Compressive Strength and Compressive Stress

T 296-2005 Standard Method of Test for Unconsolidated@ Undrained Compressive Strength of Cohesive Soils in Triaxial Compression
T 296-2010 Standard Method of Test for Unconsolidated@ Undrained Compressive Strength of Cohesive Soils in Triaxial Compression
T 296-1995 Standard Method of Test for Unconsolidated@ Undrained Compressive Strength of Cohesive Soils in Triaxial Compression (Twentieth Edition)

AT-ON, Compressive Strength and Compressive Stress

OENORM EN 17618-2020 Adhesives - Wood-to-wood adhesive bonds for non-structural applications - Determination of shear strength by compressive loading

Lithuanian Standards Office , Compressive Strength and Compressive Stress

LST EN ISO 5774:2008 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2006)
LST EN ISO 3386-2:2001 Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials (ISO 3386-2:1997)
LST EN ISO 3386-1:2001 Polymeric materials, cellular flexible - Determination of stress-strain characteristic in compression - Part 1: Low-density materials (ISO 3386-1:1986)
LST EN 1605-2013 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions

CENELEC - European Committee for Electrotechnical Standardization, Compressive Strength and Compressive Stress

EN IEC 62677-3-101:2018 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: Heatshrinkable@ polyolefin moulded shapes for low voltage applications

European Association of Aerospace Industries, Compressive Strength and Compressive Stress

AECMA PREN 6038-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of the Compression Strength After Impact Edition P1

European Committee for Electrotechnical Standardization（CENELEC）, Compressive Strength and Compressive Stress

EN IEC 62677-3-102:2018 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 102: Heatshrinkable@ polyolefin@ anti-tracking moulded shapes for medium voltage applications
EN IEC 62677-3-103:2019 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applications

American Welding Society (AWS), Compressive Strength and Compressive Stress

WRC 360:1991 Stress Indices, Pressure Design And Stress Intensification Factors For Laterals In Piping

NZ-SNZ, Compressive Strength and Compressive Stress

NZS 4402.6.2.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 6.2: Soil Strength Tests - Determination of the Compressive Strength of Specimens Tested in Undrained Triaxial Compression Test 6.2.1: Method without Measurement of Pore Water Pressure