ZH
RU
ES

absolute potential

absolute potential, Total:357 items.

In the international standard classification, absolute potential involves: Non-ferrous metals, Testing of metals, Electrical wires and cables, Surface treatment and coating, Construction materials, Corrosion of metals, Telecommunications in general, Adhesives, Fibre optic communications, Insulation, Aerospace electric equipment and systems, Electrical engineering in general, Insulating materials, Vocabularies, Integrated circuits. Microelectronics, Rotating machinery, Components and accessories for telecommunications equipment, Test conditions and procedures in general, Road vehicle systems, Radiation measurements, Insulating fluids, Electricity. Magnetism. Electrical and magnetic measurements, Petroleum products in general, Valves, Analytical chemistry, Telecommunication systems, Cinematography, Shipbuilding and marine structures in general, Measurement of force, weight and pressure, Natural gas, Protection against electric shock, Protective equipment, Nuclear energy engineering, Vacuum technology, Transformers. Reactors, Resistors, Radiocommunications, Acoustics and acoustic measurements, Semiconductor devices, Electrical accessories, Semiconducting materials, Standardization. General rules.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, absolute potential

GB/T 19198-2008 Testing method for thermo-electromotive force of precious metals and their alloys pair up with platinum or copper
GB/T 19198-2003 Measuring method for thermoelectricity force of precious metals and their alloys pair up with platinum
GB/T 13998-1992 Measuring methods of the magnetic induced longitudinal EMF,magnetic induced voltage with respect to earth,electric induced current and psophometric voltage on telecommunication lines
GB/T 11026.7-2014 Electrical insulating materials.Thermal endurance properties.Part 7: Determination of relative thermal endurance index (RTE) of insulating material
GB/T 30546-2014 Suitability of typical electrical insulating material (EIM) for polymer recycling
GB/T 5654-2007 Insulating liquids.Measurement of relative permittivity,dielectric dissipation factor and d.c.resistivity
GB/T 20139-2006 Electrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS
GB/T 5654-1985 Measurement of relative permittivity,dielectric dissipation factor at power frequency and volume resistivity of insulating liquids
GB/T 11327.3-1999 Low-frequency telecommunication cables and wires with PVC insulation and PVC sheath. Part 3: Terminating cables in pairs
GB/T 1408.2-2006 Electrical strength of insulating materials.Test methods.Part 2:Additional requirements for tests using direct voltage
GB/T 1408.2-2016 Insulating materials.Test methods for electric strength.Part 2:Additional requirements for tests using direct voltage
GB/T 22689-2008 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges

Korean Agency for Technology and Standards (KATS), absolute potential

KS C 1004-1997(2017) Testing method for thermo-electromotive force of metallic resistance materials
KS C 3608-1981(2016) Paper-insulated-lead sheathed pair cable for telephone
KS C 3608-1981(2021) Paper-insulated-lead sheathed pair cable for telephone
KS C IEC 60544-2:2019 Electrical insulating materials — Determination of the effects of ionizing radiation on insulating materials — Part 2: Procedures for irradiation and test
KS C 3603-2016(2021) Polyethylene insulated polyvinyl chloride sheathed pair cable for telephone
KS C 3603-2016 Polyethylene insulated polyvinyl chloride sheathed pair cable for telephone
KS C IEC 60216-5:2014 Electrical insulating materials — Thermal endurance properties — Part 5：Determination of relative thermal endurance index(RTE) of an insulating material
KS A ISO 22234-2011(2016) Cinematography－Relative and absolute sound pressure levels for motion-picture multi-channel sound systems－Measurement methods and levels
KS A ISO 22234-2011(2021) Cinematography－Relative and absolute sound pressure levels for motion-picture multi-channel sound systems－Measurement methods and levels
KS A ISO 22234:2011 Cinematography－Relative and absolute sound pressure levels for motion-picture multi-channel sound systems－Measurement methods and levels
KS C IEC 61858:2003 Electrical insulation systems－Thermal evaluation of modifications to an established wire－wound EIS
KS C IEC 61858:2017 Electrical insulation systems－Thermal evaluation of modifications to an established wire－wound EIS
KS C IEC 60343-2002(2022) Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
KS C 2127-1996(2016) Testing method for proof-voltage testing of thin solid electrical insulating materials
KS I ISO 6326-3:2006 Natural gas－Determination of sulfur compounds－Part 3：Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry
KS C IEC 60343-2002(2017) Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
KS C IEC 60189-3-2014(2019) Low-frequency cables and wires with PVC insulation and PVC sheath — Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples
KS C IEC 61074:2002 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry
KS C IEC 62631-2-1:2020 Dielectric and resistive properties of solid insulating materials —Part 2-1: Relative permittivity and dissipation factor —Technical frequencies(0.1 Hz ~ 10 MHz) — AC methods
KS C IEC 60189-2-2014(2019) Low-frequency cables and wires with PVC insulation and PVC sheath — Part 2: Cables in pairs, triples, quads and quintuples for inside installations

RO-ASRO, absolute potential

STAS 7106-1964
STAS 10369-1975 SOLID ELECTRICAL INSULATING MATERIALS Test methods for determining the relative resistance to breakdown by surface discharges
STAS 8293-1990 Industrial-process measurement and control. Differential relative and absolute pressure analogue electronic transducers. General technical requirements

Professional Standard - Non-ferrous Metal, absolute potential

YS/T 366-2006 Test method for thermoelectricity force of precious and their alloys pair up with copper

TR-TSE, absolute potential

TS 2393-1976 ANODIZATION (ANODIC OXIDATION) OF ALUMINI?M AND ITS ALLOYS INSULATION CHECK BY MEASUREMENT OF BREAKDOWN POTENTIAL

International Organization for Standardization (ISO), absolute potential

ISO 2376:1972 Anodization (anodic oxidation) of aluminium and its alloys; Insulation check by measurement of breakdown potential
ISO 6326-3:1989 Natural gas; determination of sulfur compounds; part 3: determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry

American Society for Testing and Materials (ASTM), absolute potential

ASTM C692-13(2023) Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
ASTM C692-08e1 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
ASTM C692-13 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
ASTM C692-08 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
ASTM C692-05 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
ASTM C692-06 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
ASTM C692-00 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
ASTM A976-18 Standard Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application
ASTM D1304-99 Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation
ASTM D5423-93(2005) Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D1304-99(2005) Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation
ASTM D1304-99(2020)e1 Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation
ASTM D5423-93(1999) Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D5374-93(1999) Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D2275-95 Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface
ASTM D2275-01 Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface
ASTM D2275-01(2008)e1 Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface
ASTM D5423-23 Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D5423-22 Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D5423-14 Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D5374-93(2005) Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D5374-22a Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D2144-07 Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption
ASTM D5374-22 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D2144-07(2013) Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption
ASTM D5374-13 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D3145-97 Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method
ASTM D3145-01 Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method
ASTM D6097-01a(2008)e1 Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
ASTM D6097-16 Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
ASTM D924-04 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
ASTM D924-03 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
ASTM D924-03a Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
ASTM D1822-06 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
ASTM D1673-94(1998) Standard Test Methods for Relative Permittivity And Dissipation Factor of Expanded Cellular Polymers Used For Electrical Insulation
ASTM D1673-94(2004) Standard Test Methods for Relative Permittivity And Dissipation Factor of Expanded Cellular Polymers Used For Electrical Insulation
ASTM D1934-95(2000) Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
ASTM D1934-95(2012) Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
ASTM D2668-02e1 Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
ASTM D2668-02 Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
ASTM D2668-07 Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
ASTM D2668-07(2013) Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
ASTM D6097-01a Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
ASTM D6097-97a Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
ASTM D6097-01 Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials

European Committee for Electrotechnical Standardization（CENELEC）, absolute potential

HD 568 S1-1990 Methods of Test for the Determination of the Insulation Resistance of Solid Insulating Materials
EN 61858-1:2014 Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS
EN IEC 60216-5:2022 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative temperature index (RTI) of an insulating material
EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
EN 61858-2:2014 Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 2: Form-wound EIS
EN 60247:2004 Insulating liquids Measurement of relative permittivity, dielectric dissipation factor (tan $) and d.c. resistivity
EN 60343:1992 Recommended Test Methods for Determining the Relative Resistance of Insulating Materials to Breakdown by Surface Discharges
EN 50290-2-23:2013 Communication cables - Part 2-23: Common design rules and construction - Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables

YU-JUS, absolute potential

JUS H.B8.708-1980 Anafrsis of technical l,l,l-trichhro-2,2-di- (p-cMorophenyl)elhane; Potentiometric determination ofacidity

CZ-CSN, absolute potential

CSN 34 7735 Z1-1997
CSN 34 7735-1975 Radio-frequency unscreened sy metrical cables with polythene insulation
CSN 35 8757 Cast.7-1985 Transistors. Measuring method of absolute value of forward current transfer ratio and transition frequency
CSN 34 6412-1985 Testing methods of electrical insulating materials.Determination of resistance of electrical materials against moulds measured by surface electrical resistivity
CSN 34 7010 Cast.65-1972 Test procedure for evalution of the thermal endurance of enamelled round wire by the loss of electric strength enamel insulation
CSN 35 8746-1973 Semiconductor devices. Transistore. Measurement of absolute value of forward current transfer ratio and frequencies fT, fh21b, fh21e

Institute of Interconnecting and Packaging Electronic Circuits (IPC), absolute potential

IPC TM-650 2.5.10.1-1998 Insulation Resistivity for Adhesive Interconnection Bonds

American National Standards Institute （ANSI), absolute potential

ANSI/TIA/EIA 455-95A-2000 Absolute Optical Power Test for Optical Fibers and Cables
ANSI/ASTM D5423:1999 Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ANSI/ASTM D5374:1999 Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ANSI/ASTM D3145:2013 Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method
ANSI/ASTM D6097a:2001 Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
ANSI/ASTM D3850:2012 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA)

British Standards Institution (BSI), absolute potential

BS EN 61858-2:2014 Electrical insulation systems. Thermal evaluation of modifications to an established electrical insulation system (EIS). Form-wound EIS
BS EN 61858-1:2014 Electrical insulation systems. Thermal evaluation of modifications to an established electrical insulation system (EIS). Wire-wound winding EIS
BS EN 60544-2:2012 Electrical insulating materials. Determination of the effects of ionizing radiation on insulating materials. Procedures for irradiation and test
BS EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
BS EN 60216-5:2003 Electrical insulating materials - Thermal endurance properties - Determination of relative thermal endurance index (RTE) of an insulating material
BS PD IEC TR 61858-3:2020 Electrical insulation systems. Thermal evaluation of modifications to an established electrical insulation system (EIS). Clarification of electrical insulating materials (EIMs) and auxiliary materials
PD IEC TR 61858-3:2020 Electrical insulation systems. Thermal evaluation of modifications to an established electrical insulation system (EIS). Clarification of electrical insulating materials (EIMs) and auxiliary materials
BS EN 61858:2008 Electrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS
BS EN 62011-3-1:2003 Insulating materials - Industrial rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 3-1:Specifications for individual materials - Tubes and rods of rectangular an
BS EN 61858:2005 Electrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS
BS EN 61858:2009 Electrical insulation systems. Thermal evaluation of modifications to an established wire-wound EIS
BS EN IEC 60216-5:2022 Tracked Changes. Electrical insulating materials. Thermal endurance properties. Determination of relative temperature index (RTI) of an insulating material
BS IEC 62125:2019 Tracked Changes. Environmental considerations specific to insulated electrical power and control cables
PD IEC TR 61094-10:2022 Electroacoustics. Measurement microphones. Absolute pressure calibration of microphones at low frequencies using calculable pistonphones
BS EN 60343:1993 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
BS 6447:1984 Specification for absolute and gauge pressure transmitters with electrical outputs
BS EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity
BS EN IEC/IEEE 62582-6:2021 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods - Insulation resistance
19/30366455 DC BS EN IEC 60216-5. Electrical insulating materials. Thermal endurance properties. Part 5. Determination of relative temperature index (RTI) of an insulating material
BS IEC 61858-2:2014 Electrical insulation systems. Thermal evaluation of modifications to an established electrical insulation system (EIS). Form-wound EIS
BS EN 50290-2-23:2013 Communication cables. Common design rules and construction. Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables
BS 7811-2:1995 Guide for determining the effects of ionizing radiation on insulating materials - Procedures for irradiation and test
BS 6921:1988 Method for evaluation of the thermal endurance of flexible sheet electrical insulating materials using the wrapped tube method
BS 7870-8.2:2003 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multipair cable with copper conductors
BS EN IEC 62631-2-2:2022 Dielectric and resistive properties of solid insulating materials - Relative permittivity and dissipation factor. High frequencies (1 MHz to 300 MHz). AC methods
BS 7870-8.6:2003 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire or double steel tape armoured and non-halogenated sheathed multi
BS EN IEC 62631-2-1:2018 Dielectric and resistive properties of solid insulating materials. Relative permittivity and dissipation factor. Technical frequencies (0,1 Hz to 10 MHz). AC Methods
BS 7870-8.3:2003 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multicore cable with copper conductors
BS EN 60674-3-2:1995 Specification for plastic films for electrical purposes - Specifications for individual materials - Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation

Association Francaise de Normalisation, absolute potential

NF EN ISO 9312:2013 Équipement de soudage par résistance - Fiches isolées utilisées dans les contre-électrodes
NF C26-315-1*NF EN 61858-1:2014 Electrical insulation systems - Thermal evaluation of modifications to an established EIS - Part 1 : wire-wound winding EIS
NF C26-290-2*NF EN 60544-2:2013 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2 : procedures for irradiation and test
NF EN 60544-2:2013 Matériaux isolants électriques - Détermination des effets des rayonnements ionisants sur les matériaux isolants - Partie 2 : méthodes d'irradiation et d'essai
NF C27-210:1979 Measurement of relative permittivity dielectric dissipation factor and D.C. Resistivity of insulating liquids.
NF EN 61858-2:2014 Systèmes d'isolation électrique - Évaluation thermique des modifications apportées à un système d'isolation électrique (SIE) éprouvé - Partie 2 : système d'isolation électrique (SIE) à enroulements préformés
NF C26-305*NF EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5 : determination of relative thermal endurance index (RTE) of an insulating material
NF EN IEC 60216-5:2022 Matériaux isolants électriques - Propriétés d'endurance thermique - Partie 5 : détermination de l'indice de température relatif (ITR) d'un matériau isolant
NF EN 60343:1993 Méthodes d'essai recommandées pour la détermination de la résistance relative des matériaux isolants au claquage par les décharges superficielles
NF C26-305:2003 Electrical insulating materials - Thermal endurance properties - Part 5 : determination of relative thermal endurance index (RTE) of an insulating material.
NF C26-315-2*NF EN 61858-2:2014 Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 2 : form-wound EIS
NF C26-315:2005 Electrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS.
NF C26-315:2009 Electrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS.
NF C27-210*NF EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan delta) and d.c.resistivity
NF EN 60247:2004 Liquides isolants - Mesure de la permittivité relative, du facteur de dissipation diélectrique (tan delta) et de la résistivité en courant continu
NF C26-240*NF EN 60343:1993 Recommanded test methods for determining the relative resistance of insulating materials to breakdown by surface discharges.
NF C93-540-2-23*NF EN 50290-2-23:2017 Communication cables - Part 2-23 : common design rules and construction - Polyethylene insulation for multi-pair cables used in access telecommunication networks : outdoor cables
NF EN IEC 62631-2-2:2022 Propriétés diélectriques et résistives des matériaux isolants solides - Partie 2-2 : Permittivité relative et facteur de dissipation - Hautes fréquences (1 MHz à 300 MHz) - Méthodes en courant alternatif
UTE C93-534-3U*UTE C93-534-3:2009 Cables with polyvinyl chloride insulation and polyvinyl chloride sheath for cabling and indoor installation of transmission equipments - Detail specification series 282 for screened one pair cables
NF EN IEC 62631-2-1:2018 Propriétés diélectriques et résistives des matériaux isolants solides Partie 2-1 : permittivité relative et facteur de dissipation - Fréquences techniques (0,1 Hz à 10 MHz) - Méthodes en courant alternatif
UTE C93-534-3:2009 Câbles à isolation polychlorure de vinyle et gaine polychlorure de vinyle pour câblage et installations intérieures des équipements de transmission - Spécification des câbles à une paire sous écran série 281

BE-NBN, absolute potential

NBN T 04-305-1983 Urea for industrial use - Measurement of the pH of a solution of urea of conventional concentration (100 g/1) - Potentiometric method
NBN-EN 60343-1993 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
NBN C 83-140-1982
NBN C 32-505-1978

Professional Standard - Machinery, absolute potential

JB/T 681-1999 Local pair telecommunication cables with copper conductor and paper insulation
JB/T 866-1999 High frequency symmetric quad telecommunication cables with copper conductor paper insulation and lead sheath
JB/T 8142.1-1995 Shipboard cables with symmetrical conductors.Shipboard symmetrical communication cables with ethylene propylene rubber insulated conductors,Type DA
JB/T 8142.2-1995 Shipboard cables with symmetrical conductors.Shipboard symmetrical communication cables with polyvinylchloride insulated conductors,Type DA
JB/T 3282-1999 Test methods for determining the relative resistance of insulating meterials to breardown by surface discharges

International Electrotechnical Commission (IEC), absolute potential

IEC 61858-2:2014 Electrical insulation systems - Thermal evaluation of modifications to an established EIS - Part 2: Form-wound EIS
IEC 60544-2:2012 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test
IEC 60216-5:2022 CMV Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative temperature index (RTI) of an insulating material
IEC 60216-5:2022 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative temperature index (RTI) of an insulating material
IEC 60216-5:2003 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
IEC 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
IEC 61858:2004 Electrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS
IEC 60247:1978 Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity of insulating liquids
IEC 60216-5:2008/COR1:2009 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material; Corrigendum 1
IEC 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity
IEC 61858:1999 Electrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS
IEC 60076-22-4:2019 Power transformers - Part 22-4: Power transformer and reactor fittings - Insulating liquid to water heat exchangers
IEC 60343:1991 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
IEC 60243-2:2001 Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage
IEC 60544-1:1977 Guide for determining the effects of ionizing radiation on insulating materials. Part 1 : Radiation interaction
IEC TR 61094-10:2022 Electroacoustics - Measurement microphones - Part 10: Absolute pressure calibration of microphones at low frequencies using calculable pistonphones
IEC 61858-1:2014 Electrical insulation systems - Thermal evaluation of modifications to an established EIS - Part 1: Wire-wound winding EIS
IEC TR 61074:1991 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry
IEC 62631-2-2:2022 Dielectric and resistive properties of solid insulating materials - Part 2-2: Relative permittivity and dissipation factor - High frequencies (1 MHz to 300 MHz) - AC methods
IEC 60674-3-2:1992 Specification for plastic films for electrical purposes; part 3: specifications for individual materials; sheet 2: requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation
IEC 60674-3-4 to 6:1993 Specification for plastic films for electrical purposes; part 3: specifications for individual materials; sheets 4 to 6: requirements for polyimide films used for electrical insulation
IEC 60674-3-3:1992 Specification for plastic films for electrical purposes; part 3: specifications for individual materials; sheet 3: requirements for polycarbonate (PC) films used for electrical insulation
IEC 60674-3-7:1992 Specification for plastic films for electrical purposes; part 3: specifications for individual materials; sheet 7: requirements for fluoroethylene-propylene (FEP) films used for electrical insulation

PL-PKN, absolute potential

PN T90602-1991 Solid polyethylene insulation radio-frequency symmetrical flat cables
PN E04453-1954 Magnetic sheets used in electrical engineering -- Determination of relativity of induction from magnetic field intensity by absolute method using ring test specimen

KR-KS, absolute potential

KS C IEC 60544-2-2019 Electrical insulating materials — Determination of the effects of ionizing radiation on insulating materials — Part 2: Procedures for irradiation and test
KS C IEC 61858-1-2017 Electrical insulation systems — Thermal evaluation of modifications to an established electrical insulation(EIS)— Part 1:Wire-wound winding EIS
KS C IEC 62631-2-1-2020 Dielectric and resistive properties of solid insulating materials —Part 2-1: Relative permittivity and dissipation factor —Technical frequencies(0.1 Hz ~ 10 MHz) — AC methods

Society of Automotive Engineers (SAE), absolute potential

SAE AS4851A-2005 Relative Thermal Life and Temperature Index for Insulated Electric Wire
SAE AS4851A-2017 Relative Thermal Life and Temperature Index for Insulated Electric Wire
SAE AMS-DTL-23053/7A-2012 Insulation Sleeving, Electrical, Heat Shrinkable, Polyethylene Terephthalate, Non-Crosslinked
SAE AS23053/7-2022 INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE POLYETHYLENE TEREPHTHALATE, NON-CROSSLINKED
SAE AMS-DTL-23053/7B-2018 Insulation Sleeving, Electrical, Heat Shrinkable, Polyethylene Terephthalate, Non-Crosslinked
SAE AS81822/1-2004 WIRE, ELECTRICAL, SOLDERLESS WRAP, POLYETHYLENE TEREPHTHALATE-POLYESTER LAMINATED TAPE INSULATION, SILVER COATED SOLID CONDUCTOR
SAE AMS3591B-1993 POLYETHYLENE TEREPHTHALATE PLASTIC TUBING, ELECTRICAL INSULATION Thermally Welded, Heat Shrinkable 1.6 to 1 Shrink Ratio
SAE AMS3591A-1988 PLASTIC TUBING, ELECTRICAL INSULATION, THERMALLY WELDED Polyethylene Terephthalate, Heat Shrinkable 1.6 to 1 Shrink Ratio
SAE AMS3591-1995 PLASTIC TUBING, ELECTRICAL INSULATION, THERMALLY WELDED Polyethylene Terephthalate, Heat Shrinkable 1.6 to 1 Shrink Ratio
SAE AS81822/1A-2011 Wire, Electrical, Solderless Wrap, Polyethylene Terephthalate-Polyester Laminated Tape Insultation, Silver Coated Solid Conductor
SAE AS81531-1998 Marking of Electrical Insulating Materials FSC 6145; Should be Used for New Design Instead of MIL-M-81531, Which Was Inactivated for New Design on September 30, 1998
SAE AS81822/1-1998 WIRE, ELECTRICAL, SOLDERLESS WRAP, POLYETHYLENE TEREPHTHALATE-POLYESTER LAMINATED TAPE INSULATION, SILVER COATED SOLID CONDUCTOR FSC 6145

ES-UNE, absolute potential

SAE AS4851A-2023 Relative Thermal Life and Temperature Index for Insulated Electric Wire
UNE-EN 60544-2:2012 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test (Endorsed by AENOR in January of 2013.)
UNE-EN 61858-2:2014 Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 2: Form-wound EIS (Endorsed by AENOR in June of 2014.)
UNE-EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties -- Part 5: Determination of relative thermal endurance index (RTE) of an insulating material (Endorsed by AENOR in September of 2008.)
UNE-EN IEC 60216-5:2022 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative temperature index (RTI) of an insulating material (Endorsed by Asociación Española de Normalización in February of 2023.)
UNE-EN 61858-1:2014 Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS (Endorsed by AENOR in June of 2014.)
UNE-EN 60247:2004 ERRATUM:2005 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
UNE-EN IEC/IEEE 62582-6:2021 Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 6: Insulation resistance (Endorsed by Asociación Española de Normalización in September of 2021.)
UNE-EN IEC 62631-2-2:2022 Dielectric and resistive properties of solid insulating materials - Part 2-2: Relative permittivity and dissipation factor - High frequencies (1 MHz to 300 MHz) - AC methods (Endorsed by Asociación Española de Normalización in July of 2022.)

RU-GOST R, absolute potential

GOST 20690-1975 Electrical equipment for a.c. voltage 750 kV. Requirements for electric strength of insulation
GOST 23089.7-1983 Integrated circuits. Method of measuring the power sources instability effect on the operational amplifiers zero drift voltage and emf
GOST 27905.4-1988 Electrical insulation systems. Methods of evaluation of electrical endurance
GOST 28024-1989 Adhesive tape for electrical insulation. Requirements for paper tapes with thermosetting adhesive
GOST 27427-1987 Electrical insulating materials. Test methods for relative determination of resistance to break-down by surface discharges
GOST 10345.1-1978 Solid electroinsulating materials. Method for the determination of arc resistance of alternating voltage greater than 1000 V
GOST 33110-2014 Electrical insulating oil. Determination of interfacial tension of oil against water. The ring method
GOST 28021-1989 Adhesive tape for electrical insulation. Requirements for polyester tapes with thermosetting adhesive
GOST 28022-1989 Adhesive tape for electrical insulation. Requirements for polyester tapes with thermoplastic adhesive
GOST 27710-1988 Electrical insulating materials. General requirements for thermal endurance test method
GOST 28023-1989 Adhesive tape for electrical insulation. Requirements for crepped paper tapes with thermosetting adhesive
GOST 28025-1989 Adhesive tape for electrical insulation. Requirements for polycarbonate tapes with thermoplastic adhesive
GOST 28026-1989 Adhesive tapes for electrical insulation. Requirements for polyimide tapes with themosetting adhesive
GOST 28027-1989 Adhesive tape for electrical insulation. Requirements for paper tapes with thermosetting adhesive
GOST 28938-1991 Specification for fibre for electrical purposes. Part 1. Terms and definitions. General requirements
GOST 28939-1991 Specification for fibre for electrical purposes. Part 2. Methods of test
GOST 28940-1991 Specification for fibre for electrical purposes. Part 3. Specifications for individual materials. Sheet 1. Flat sheets
GOST 15125-1992 Cord-polystyrene insulated high-frequency balanced communication cables. Specifications
GOST 28020-1989 Adhesive tape for electrical insulation. Requirements for plastified polyvinylchloride tapes with thermoplastic adhesive
GOST R IEC 60247-2013 Insulating liquids. Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
GOST R 8.623-2006 State system for ensuring the uniformity of measurements. Relative dielectric permittivity and the loss tangent of solid dielectrics. Procedures of measurements at microwave frequencies
GOST 28913-1991 Methods of test for the determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources
GOST 30630.3.2-2013 Methods for determination of endurance of polymer electrical insulation materials and systems by means of acceleration tests in chemically active media. General requirements; Materials and insulation systems for law-voltage electrical products tests

Japanese Industrial Standards Committee (JISC), absolute potential

JIS C 62125:2022 Environmental considerations specific to insulated electrical power and control cables
JIS C 2138:2007 Electrical insulating materials -- Methods for the determination of the relative permittivity and dielectric dissipation factor
JIS C 2143-6:2014 Electrical insulating materials -- Thermal endurance properties -- Part 6: Determination of thermal endurance indices (temperature index and relative thermal endurance index) of an insulating material using the fixed time frame method

SE-SIS, absolute potential

SIS SS IEC 343:1982 Recommended test methods for determining the relative resistance of insulating materials to break-down by surface discharges

Group Standards of the People's Republic of China, absolute potential

T/ZJBX 02-2019 Group standard for testing the electric wiring insulation resistance of harbour portal crane
T/GVS 005-2022 Testing specification for contrast method of absolute pressure capacitance diaphragm vacuum gauge in the semiconductor equipment

National Metrological Verification Regulations of the People's Republic of China, absolute potential

JJG(电子) 30902-2006 Specification for verification of absolute spectral response rate of photodetectors

(U.S.) Telecommunications Industries Association , absolute potential

TIA-455-95-A-2000 FOTP-95 Absolute Optical Power Test for Optical Fibers and Cables

Professional Standard - Post and Telecommunication, absolute potential

YD/T 1019-1999 Polyolefin insulated horizontal twisted pair cable for digital communication
YD/T 1019-2013 Polyolefin insulated horizontal twisted pair cable for digital communication
YD/T 1019-2023
YD/T 1019-2001 Multicore and Symmetrical Pair/Quad Cables for Digital Communications Horizontal Floor Wiring----Solid Polyolefin Insulate
YD/T 818-1996 PVC insulated PVC sheathed digital local symmetrical cable
YD/T 530-1992 high-frequency office symmetric copper-core, PE insulated, PVC sheathed cables

International Telecommunication Union (ITU), absolute potential

ITU-T Q.20-1989 Maximum Permissible Value for the Absolute Power Level of a Signalling Pulse - General Recommendations on Telephone Switching and Signalling - Functions and Information Flows for Services in the ISDN - Supplements (Study Group XI) 2 pp
ITU-T G.224-1993 MAXIMUM PERMISSIBLE VALUE FOR THE ABSOLUTE POWER LEVEL (POWER REFERRED TO ONE MILLIWATT) OF A SIGNALLING PULSE
ITU-T G.224 FRENCH-1993 MAXIMUM PERMISSIBLE VALUE FOR THE ABSOLUTE POWER LEVEL (POWER REFERRED TO ONE MILLIWATT) OF A SIGNALLING PULSE
ITU-T G.224 SPANISH-1993 MAXIMUM PERMISSIBLE VALUE FOR THE ABSOLUTE POWER LEVEL (POWER REFERRED TO ONE MILLIWATT) OF A SIGNALLING PULSE
ITU-T G.224-1988 Maximum permissible value for the absolute power level (power referred to one milliwatt) of a signalling pulse
ITU-T G.224-1989 Maximum Permissible Value for the Absolute Power Level (Power Referred to One Milliwatt) of a Signalling Pulse - International Analogue Carrier Systems (Study Group XV) 1 pp

AENOR, absolute potential

UNE 84174:1995 ESSENTIAL OILS. EVALUATION OF THE ABSOLUTE AND RELATIVE DENSITY OF ESSENTIAL OILS. (ELECTRONIC DENSITYMETER METHOD).
UNE-EN 61621:1998 DRY, SOLID INSULATING MATERIALS. RESISTANCE TEST TO HIGH-VOLTAGE, LOW-CURRENT ARC DISCHARGES.
UNE-EN 60343:1996 RECOMMENDED TEST METHOD FOR DETERMINING THE RELATIVE RESISTANCE OF INSULATING MATERIALS TO BREAKDOWN BY SURFACE DISCHARGES.
UNE-EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
UNE 22513-1:1996 ELECTRIC CABLES FOR UNDERGROUND MINING. FLEXIBLE CABLES, EPR INSULATED. NOMINAL VOLTAGE 0,6/1 KV, 1,8/3 KV AND 3,6/6 KV. PART 1: TYPE DS1N (SYMMETRIC).
UNE 22513-3:1996 ELECTRIC CABLES FOR UNDERGROUND MINING. FLEXIBLE CABLES, EPR INSULATED. NOMINAL VOLTAGE 0,6/1 KV, 1,8/3 KV AND 3,6/6 KV. PART 3: TYPE DS1N (ASSYMETRIC).
UNE 212002-2:2014 Low-frequency cables and wires with PVC insulation and PVC sheath. Part 2: Cables in pairs, triples, quads and quintuples for inside installations.
UNE-EN 50290-2-23:2014 Communication cables - Part 2-23: Common design rules and construction - Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables

Lithuanian Standards Office , absolute potential

LST EN 61858-1-2014 Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS (IEC 61858-1:2014)
LST EN 60544-2-2013 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials -- Part 2: Procedures for irradiation and test (IEC 60544-2:2012)
LST EN 60343-2002 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges (IEC 60343:1991)
LST EN 60216-5-2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material (IEC 60216-5:2008)
LST EN 60247-2004 Insulating liquids. Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity (IEC 60247:2004)
LST EN 61858-2009 Electrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS (IEC 61858:2008)

Taiwan Provincial Standard of the People's Republic of China, absolute potential

CNS 3471-1997 PE-insulated pair type aluminium tape shield,PE-sheathed,telephone cable
CNS 9168-1989 250V PVC Insulated PVC Sheathed Metal Netting Covered Telephone Cable and 250V PVC Insulated PVC Sheathed Metal Netting Covered PVC Anti-Corrosion Telephone Cable for Marine Use

CO-ICONTEC, absolute potential

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., absolute potential

ASHRAE 4575-2002 Convection and Electromechanical Analysis of Electrostatically Actuated Blinds Inside Insulated Glass

International Commission on Illumination (CIE), absolute potential

CIE 65-1985 Electrically Calibrated Thermal Detectors of Optical Radiation: (Absolute Radiometers) (E)

Danish Standards Foundation, absolute potential

DS/EN 60544-2:2012 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test
DS/EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
DS/IEC TR 61858-3:2021 Electrical insulation systems – Thermal evaluation of modifications to an established electrical insulation system (EIS) – Part 3: Clarification of electrical insulating materials (EIMs) and auxiliary materials
DS/EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan phi) and d.c. resistivity
DS/EN 61858:2008 Electrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS
DS/IEC 247:1979 Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity of insulating liquids
DS/IEC 544-1:1981 Guide for determining the effects of ionizing radiation on insulating materials. Part 1: Radiation interaction
DS/IEC 544-2:1981 Guide for determining the effects of ionizing radiation on insulating materials. part 2: Procedures for irradiation
DS/IEC 544-3:1981 Guide for determining the effects of ionizing radioation on insulating materials. Part 3: Test procedures for permanent effects

CENELEC - European Committee for Electrotechnical Standardization, absolute potential

EN 60544-2:2012 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test
DD ENV 61072-1993 Methods of Test for Evaluating the Resistance of Insulating Materials Against the Initiation of Electrical Trees
EN 61858:2008 Electrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS
EN 61858:2005 Electrical insulation systems Thermal evaluation of modifications to an established wire-wound EIS
EN 61858:2000 Electrical Insulation Systems Thermal Evaulation of Modifications to an Established Wire-Wound EIS

Professional Standard - Energy, absolute potential

NB/T 42004-2013 Test method for voltage-endurance test on groundwall insulation of stator coil of high voltage AC machines
NB/T 42005-2013 Test method for thermal voltage-endurance testing on groundwall insulation of stator coil of high voltage AC machines

German Institute for Standardization, absolute potential

DIN IEC/TR 61858-3:2022-10 Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 3: Clarification of electrical insulating materials (EIMs) and auxiliary materials (IEC TR 61858-3:2020)
DIN EN 60216-5:2009 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material (IEC 60216-5:2008); German version EN 60216-5:2008
DIN EN 61858:2009 Electrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS (IEC 61858:2008); German version EN 61858:2008
DIN EN 61858-1:2014 Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS (IEC 61858-1:2014); German version EN 61858-1:2014
DIN EN 61858-2:2014 Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 2: Form-wound EIS (IEC 61858-2:2014); German version EN 61858-2:2014
DIN 47414:1981-04 Telecommunication cord with stranded wires; PVC-insulation and PVC outer covering, paired conductors, waterproof
DIN EN 60247:2005 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity (IEC 60247:2004); German version EN 60247:2004
DIN EN 60903 Berichtigung 1:2005 Live working - Gloves of insulating material (IEC 60903:2002 + Corrigendum 2003, modified); German version EN 60903:2003, Corrigenda to DIN EN 60903 (VDE 0682-311):2004-07
DIN EN ISO 6326-3:1998 Natural gas - Determination of sulfur compounds - Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry (ISO 6326-3:1989); German version EN ISO 6326-3:1997
DIN EN 480-14:2007 Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test English version of DIN EN 480-14:2007-03
DIN 47413:1981-04 Telecommunication cord with stranded wires; PVC-insulation and textil braided outer covering, paired conductors, dampproof
DIN IEC/TR 61858-3:2018 Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 3: Clarification of EIM and auxiliary materials (IEC 112/410/CD:2017); Text in German and English
DIN EN 60343:1994 Recommended test methods for determinig the relative resistance of insolating materials to breakdown by surface discharges test methods (IEC 60343:1991); German version EN 60343:1993
DIN EN 60544-2:2013 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test (IEC 60544-2:2012); German version EN 60544-2:2012
DIN V VDE V 0884-10 Berichtigung 1:2007 Semiconductor devices - Magnetic and capacitive couplers for safe isolatio; Corrigenda to DIN V VDE V 0884-10 (VDE V 0884-10):2006-12
DIN EN 60243-3:2002 Electric strenght of insulating materials - Test methods - Part 3: Additional requirements for (1,2/50 ?s) impulse tests (IEC 60243-3:2001); German version EN 60243-3:2001
DIN 47600-6:1974 Cast Metal Joint Boxes for Power Cables up to 10 kV; Correlation of Joint Boxes with Plastic Insulated Cables 0.6/1 kV
DIN 50448:1998 Testing of materials for semiconductor technology - Contactless determination of the electrical resistivity of semi-insulating semi-conductor slices using a capacitive probe

Defense Logistics Agency, absolute potential

DLA MIL-DTL-9395 H SUPP 1-2006 SWITCHES, PRESSURE, (ABSOLUTE, GAGE, AND DIFFERENTIAL), GENERAL SPECIFICATION FOR
DLA MIL-DTL-9395 H-2006 SWITCHES, PRESSURE, (ABSOLUTE, GAGE, AND DIFFERENTIAL), GENERAL SPECIFICATION FOR

IN-BIS, absolute potential

European Committee for Standardization (CEN), absolute potential

EN 60216-5:2003 Electrical insulating materials — Thermal endurance properties — Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
EN ISO 6326-3:1997 Natural Gas - Determination of Sulfur Compounds - Part 3: Determination of Hydrogen Sulfide, Mercaptan Sulfur and Carbonyl Sulfide Sulfur by Potentiometry
EN 480-14:2006 Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test
prEN 60343-1992 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges (IEC 343:1991)
prEN 61074-1992 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry (IEC 1074:1991)

VE-FONDONORMA, absolute potential

COVENIN 397-1976

JP-JCS, absolute potential

JCS 4520-2011 Pair type polyethylene insulated flame retardant polyethylene sheathed local cables

ES-AENOR, absolute potential

UNE 21-320 Pt.4-1989
UNE 21-375 Pt.3-320-1993 Specification for flexible insulating sleeving. Part 3: Specification requirements for individual types of sleeving. Sheet 320: Polyethylene terephthalate textile, lightly impregnated

SAE - SAE International, absolute potential

SAE AS23053/7-2016 INSULATION SLEEVING@ ELECTRICAL@ HEAT SHRINKABLE POLYETHYLENE TEREPHTHALATE@ NON-CROSSLINKED
SAE AMS3591C-1995 POLYETHYLENE TEREPHTHALATE PLASTIC TUBING@ ELECTRICAL INSULATION - THERMALLY WELDED@ HEAT SHRINKABLE 1.6 TO 1 SHRINK RATIO

工业和信息化部, absolute potential

YD/T 3296.2-2018 Polyolefin insulated outdoor twisted pair cables for digital communications Part 2: Unfilled cables
YD/T 3296.1-2017 Polyolefin insulated outdoor twisted pair cables for digital communications Part 1: General provisions
SJ/T 11462.3-2016 Encoders for electronic equipment Part 3: Standardized absolute rotary encoders
SJ/T 11462.3.1-2016 Encoders for electronic equipment Part 3-1: Blank detailed specification for absolute rotary encoder evaluation level EZ

Indonesia Standards, absolute potential

SNI 04-6542-2001 Measuremert of relative permitivity, dielectric dissipation factor and d.c. resistivity of insulating liquid

HU-MSZT, absolute potential

MSZ 11029/14-1984

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., absolute potential

IEEE C37.0781-1972 Schedule of dielectric test values for outdoor ac high-voltage circuit breaker external insulation rated on a symmetrical current basis
IEEE 339-1972 Requirements for Switching-Impulse Voltage Insulation Strength for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis (362 kV and Above)

United States Navy, absolute potential

NAVY MIL-PRF-81836/2 B-1998 FILTER, FLUID PRESSURE, HYDRAULIC, 5,000 PSI 3 MICRON ABSOLUTE, TYPE B, ELECTRICAL INDICATOR

NL-NEN, absolute potential

NEN 15013-2-1981 Supplement to NEN 15013-2 Polyvinyl chloride insulated cables for fixed installations
NEN 10343-1993 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges (IEC 343:1991)

AT-OVE/ON, absolute potential

OVE EN IEC 60216-5:2021 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative temperature index (RTI) of an insulating material (IEC 112/517/CDV) (english version)

Society of Motion Picture and Television Engineers (SMPTE), absolute potential

SMPTE RP 200-2012 Relative and Absolute Sound Pressure Levels for Motion-Picture Multichannel Sound Systems - Applicable for Analog Photographic Film Audio, Digital Photographic Film Audio and D-Cinema
SMPTE RP 200-2002 Relative and Absolute Sound Pressure Levels for Motion-Picture Multichannel Sound Systems - Applicable for Analog Photographic Film Audio, Digital Photographic Film Audio and D-Cinema

Institute of Electrical and Electronics Engineers (IEEE), absolute potential

IEEE Std 339-1972*ANSI C37.074-1972 IEEE Standard Requirements for Switching-Impulse Voltage Insulation Strength for AC High Voltage Circuit Breakers Rated on a Symmetrical Current Basis (362 kB and Above)
IEEE 343-1972 IEEE Standard Requirements for External Insulation for Outdoor AC High Voltage Circuit Breakers Rated on a Symmetrical Current Basis
IEEE Std 343-1972*ANSI C37.078-1972 IEEE Standard Requirements for External Insulation for Outdoor AC High Voltage Circuit Breakers Rated on a Symmetrical Current Basis
SMPTE RP 200:2002 RP 200:2002 - SMPTE Recommended Practice - Relative and Absolute Sound Pressure Levels for Motion-Picture Multichannel Sound Systems — Applicable for Analog Photographic Film Audio, Digital Photographic Film Audio and D-Cinema
SMPTE RP 200:2012 RP 200:2012 - SMPTE Recommended Practice - Relative and Absolute Sound Pressure Levels for Motion-Picture Multichannel Sound Systems — Applicable for Analog Photographic Film Audio, Digital Photographic Film Audio and D-Cinema
IEEE P433/D7, June 2020 IEEE Draft Recommended Practice for Insulation Testing of AC Electric Machinery with High Voltage Rating up to 30 kV at Very Low Frequency
IEEE P433/D8, October 2021 IEEE Draft Recommended Practice for Insulation Testing of AC Electric Machinery with High Voltage Rating up to 30 kV at Very Low Frequency
ANSI C37.0781-1972 ANSI American National Standard Schedule of Dielectric Test Values for Outdoor AC High-Voltage Circuit Breaker External Insulation Rated on a Symmetrical Current Basis

Standard Association of Australia （SAA）, absolute potential

AS 1767.2.2:2008

PT-IPQ, absolute potential

NP 3126-1985

ETSI - European Telecommunications Standards Institute, absolute potential

TR 102 748-2008 Electromagnetic compatibility and Radio spectrum Matters (ERM); Impact of the trend towards flexibility in spectrum usage on the principles for drafting Harmonized Standards and the ETSI work programme for Harmonized Standards (V1.1.1)

Professional Standard - Aerospace, absolute potential

QJ 2220.4-1994 Test method for coating electrical insulation performance Test method for relative dielectric constant at power frequency, audio frequency and high frequency

国家市场监督管理总局、中国国家标准化管理委员会, absolute potential

GB/T 31838.6-2021 Solid insulating materials—Dielectric and resistive properties—Part 6:Dielectric properties(AC method)—Relative permittivity and dielectric dissipation factor (frequencies 0.1Hz~10MHz)

European Telecommunications Standards Institute (ETSI), absolute potential

ETSI TR 102 748-2008 Electromagnetic compatibility and Radio spectrum Matters (ERM); Impact of the trend towards flexibility in spectrum usage on the principles for drafting Harmonized Standards and the ETSI work programme for Harmonized Standards (V1.1.1)

IEC - International Electrotechnical Commission, absolute potential

IEC 60544-3:1979 Guide for Determining the Effects of Ionizing Radiation on Insulating Materials Part 3: Test Procedures for Permanent Effects (Edition 1.0)