ZH
RU
ES

Function of thermal analyzer

Function of thermal analyzer, Total:191 items.

In the international standard classification, Function of thermal analyzer involves: Analytical chemistry, Thermodynamics and temperature measurements, Insulating materials, Inorganic chemicals, Metrology and measurement in general, Water quality, Vocabularies, Raw materials for rubber and plastics, Products of the chemical industry, Measurement of volume, mass, density, viscosity, Equipment for petroleum and natural gas industries, Materials for aerospace construction, Mechanical testing, Elements of buildings, Petroleum products in general, Coals, Products of non-ferrous metals, Ergonomics, Textile fibres, Nuclear energy engineering, Road vehicle systems, Plastics, Lubricants, industrial oils and related products, Pipeline components and pipelines, Air quality, Paper products, Industrial furnaces, Paints and varnishes, Milk and milk products, Non-destructive testing, Wastes, Rubber, Pharmaceutics, Laboratory medicine, Space systems and operations, Radiation measurements.

中国石油天然气总公司, Function of thermal analyzer

SY/T 6015-1994 Oil and gas display analyzer rock pyrolysis analysis method

American Society for Testing and Materials (ASTM), Function of thermal analyzer

ASTM E1131-98 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E1953-98 Standard Practice for Description of Thermal Analysis Apparatus
ASTM E1877-11 Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
ASTM E1131-08(2014) Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E1131-03 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM D6382/D6382M-99(2011)e1 Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
ASTM D7453-18 Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
ASTM D7453-17 Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
ASTM E1641-07 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1641-07(2012) Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM B947-06(2013) Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
A-A-59410A-2015 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54409 NOT 1-2012 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-59163A-2010 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1641-99 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54409-1991 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-55281-1995 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-55220-1995 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54923-1993 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A 59377B-2016 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM C1413-05(2011) Standard Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry
ASTM E2008-04 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E2008-06 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E1603-99 Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
ASTM E1603-99(2006) Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
ASTM E1603/E1603M-11 Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
ASTM D3249-95(2011) Standard Practice for General Ambient Air Analyzer Procedures
ASTM E1641-23 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM UOP993-15 Water in Solids by Furnace Desorption with Volumetric Karl Fischer Titration
ASTM E1644-04(2012)e1 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM D7582-12 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM D7582-15 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM D6621-00 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM D6621-00(2006)e1 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM E1641-13 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM F1320-01(2006) Standard Test Method for Evaluating Thermal Paper Employing a Facsimile Thermal Printer as a Test Instrument
ASTM D5513-99 Standard Practice for Microwave Digestion of Industrial Furnace Feedstreams and Waste for Trace Element Analysis
ASTM D5513-99(2004) Standard Practice for Microwave Digestion of Industrial Furnace Feedstreams and Waste for Trace Element Analysis
ASTM E1726-01 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E1726-01(2009) Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E1641-15 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E1641-16 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E3007-15 Standard Practice for Kinetic Values Used to Evaluate the Study of Decomposition Reactions by Thermogravimetry
ASTM E2781-11 Standard Practice for Evaluation of Methods for Determination of Kinetic Parameters by Thermal Analysis
ASTM E2781-16 Standard Practice for Evaluation of Methods for Determination of Kinetic Parameters by Calorimetry and Differential Scanning Calorimetry
ASTM E1641-18 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E1645-16 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM D6375-99a Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6375-05 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM E2551-18 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E3301-22 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers Using Thermal Lag
ASTM E2551-20 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM D6375-09(2019) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6375-09(2014) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer 40;TGA41; Noack Method
ASTM UOP821-81 Automated Micro Pore Size Distribution of Porous Substances by Nitrogen Adsorption and/or Desorption Using a Micromeritics Analyzer
ASTM E2403-04 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E2403-06 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E2403-06(2012) Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E498/E498M-11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
ASTM E1645-21 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E1645-20 Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E1645-20a Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM C1463-13 Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis
ASTM D7690-11 Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
ASTM E3007-21 Standard Practice for Selection and Use of Kinetic Reference Values in the Study of Decomposition Reactions by Thermogravimetry
ASTM E1645-01 Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E1645-94 Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E1645-01(2007) Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E1645-01(2016)e1 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis

HU-MSZT, Function of thermal analyzer

MSZ 11596-1983

American National Standards Institute （ANSI), Function of thermal analyzer

ANSI/ASTM D3850:2012 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA)
ANSI/ASTM D6375:2009 Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) (Noack Method)

International Organization for Standardization (ISO), Function of thermal analyzer

ISO 2202:1972 Liquid chlorine for industrial use; Determination of water content using an electrolytic analyser
ISO 2202:1972/Add 1:1975 Liquid chlorine for industrial use — Determination of water content using an electrolytic analyser — Addendum 1
ISO 15680:2003 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
ISO 248-2:2012 Rubber, raw - Determination of volatile-matter content - Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
ISO 23674:2022 Cosmetics — Analytical methods — Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser)
ISO/FDIS 7933 Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
ISO 7933:2023 Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
ISO 7730:2005 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
ISO/DIS 7730 Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
ISO 15985:2004 Plastics - Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions - Method by analysis of released biogas
ISO 16017-1:2000 Indoor, ambiant and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling
ISO 16017-2:2003 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling
ISO 6145-7:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
ISO 4802-2:2010 Glassware - Hydrolytic resistance of the interior surfaces of glass containers - Part 2: Determination by flame spectrometry and classification
ISO 4802-2:2016 Glassware - Hydrolytic resistance of the interior surfaces of glass containers - Part 2: Determination by flame spectrometry and classification
ISO 6145-7:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
ISO 15568:1998 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
ISO 16200-1:2001 Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Part 1: Pumped sampling method

Group Standards of the People's Republic of China, Function of thermal analyzer

T/SDZDH 002-2021 Identification and Resolution Of Industrial Internet—Specification Of Instrument Parts Coding and Identification
T/SDZDH 003-2021 Identification and Resolution Of Industrial Internet-Application Service Platform Operation Specification of Instrument
T/SDZDH 004-2021 Identification and Resolution Of Industrial Internet—Application Service Platform Interface of Instrument
T/CAMS 131-2023 Distributed Industrial Internet Identity Resolution System——Application Specifications In The Instrumentation Industry

Hunan Provincial Standard of the People's Republic of China, Function of thermal analyzer

DB43/T 2452-2022 General technical requirements for heat loss rate analyzer

Korean Agency for Technology and Standards (KATS), Function of thermal analyzer

KS I ISO 15680:2010 Water quality－Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
KS A ISO 7933-2005(2021) Ergonomics of the thermal environment－Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
KS A ISO 7730:2010 Ergonomics of the thermal environment－Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
KS D ISO 11692-2003(2013) Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures
KS I ISO 16017-2:2005 Indoor, ambient and workplace air-Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography-Part 2:Diffusive sampling
KS A ISO 7730-2010(2021) Ergonomics of the thermal environment－Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
KS I ISO 16017-1:2008 Indoor, ambient and workplace air－Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/ capillary gas chromatography－Part 1：Pumped sampling
KS I ISO 6145-7:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 7:Thermal mass-flow controllers
KS I ISO 6145-7:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 7：Thermal mass-flow controllers

Association Francaise de Normalisation, Function of thermal analyzer

NF T90-129*NF EN ISO 15680:2004 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption.
NF EN 16900:2018 Huiles de pyrolyse rapide pour application chaudières - Spécifications et méthodes d'analyses
NF EN ISO 23674:2022 Cosmétiques - Méthodes d'analyse - Dosage direct des traces de mercure dans les cosmétiques par décomposition thermique et spectrométrie d'absorption atomique (analyseur de mercure)
NF C46-225*NF EN 61115:1994 Expression of performance of sample handling systems for process analyzers.
NF T70-538:2003 Energetic materials for defense - Safety, vulnerability - Compatibility by thermo-gravimetric analysis
NF X35-203*NF EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria.
NF C46-270-4*NF EN IEC 60746-4:2019 Expression of performance of electrochemical analyzers - Part 4 : dissolved oxygen in water measured by membrane covered amperometric sensors
NF EN IEC 60746-4:2019 Expression des qualités de fonctionnement des analyseurs électrochimiques - Partie 4 : oxygène dissous dans l'eau mesuré par des capteurs ampérométriques recouverts d'une membrane

British Standards Institution (BSI), Function of thermal analyzer

BS ISO 248-2:2012 Rubber, raw. Determination of volatile-matter content. Thermogravimetric methods using an automatic analyser with an infrared drying unit
BS EN ISO 23674:2022 Cosmetics. Analytical methods. Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser)
BS 4044:1989 Methods for determination of fibre length by comb sorter diagram
21/30387777 DC BS EN ISO 23674. Cosmetics. Analytical methods. Direct determination of traces of mercury in cosmetics by thermal decomposition. Atomic absorption spectrometry (mercury analyzer)
BS EN ISO 7933:2004 Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
BS EN ISO 7933:2023 Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
BS EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
BS EN ISO 16017-2:2003 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Diffusive sampling
21/30436560 DC BS EN ISO 7933.2. Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
18/30312137 DC BS EN ISO 7933. Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
BS EN 12515:1997 Hot Environments - Analytical Determination and Interpretation of Thermal Stress Using Calculation of Required Sweat Rate ISO 7933: 1989 Modified
BS ISO 15985:2004 Plastics - Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions - Method by analysis of released biogas
PD ISO/TR 13154:2017 Medical electrical equipment. Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermograph
BS ISO 7270-2:2012 Rubber. Analysis by pyrolytic gas-chromatographic methods. Determination of styrene/butadiene/isoprene ratio
BS EN ISO 16017-1:2001 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Pumped sampling
BS ISO 12988-2:2004 Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Thermogravimetric method

European Committee for Standardization (CEN), Function of thermal analyzer

EN ISO 15680:2003 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption ISO 15680:2003
EN ISO 23674:2022 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022)
prEN ISO 23674:2021 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition - Atomic absorption spectrometry (mercury analyzer) (ISO/DIS 23674:2021)
EN ISO 7933:2023 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2023)
EN 12515:1997 Hot Environments - Analytical Determination and Interpretation of Thermal Stress Using Calculation of Required Sweat Rate ISO 7933: 1989 Modified
FprEN ISO 7933 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO/FDIS 7933:2023)
EN ISO 7730:2005 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
EN ISO 16017-2:2003 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling
prEN ISO 7730 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO/DIS 7730:2023)
EN ISO 16017-1:2000 Indoor, Ambient and Workplace Air - Sampling and Analysis of Volatile Organic Compounds by Sorbent Tube/Thermal Desorption/Capillary Gas Chromatography - Part 1: Pumped Sampling ISO 16017-1:2000
EN ISO 6145-7:2010 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)

RU-GOST R, Function of thermal analyzer

GOST 13320-1981 Automatic instruments of contnuous action used for gas analysis. General requirements
GOST 32334-2013 Lubricating oils. Determination of evaporation loss of by thermogravimetric analyzer (TGA) Noack method
GOST R ISO 7730-2009 Ergonomics of the thermal environment. Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria

German Institute for Standardization, Function of thermal analyzer

DIN 53436-2:2015-12 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 2: Thermal decomposition method
DIN 53436-4:2015-12 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 4: Thermal decomposition method for liquids / Note: Applies in conjunction with DIN 53436-1 (2015-12), DIN 53436-2 (2015-12).
DIN EN ISO 23674:2022 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022)
DIN EN ISO 7933:2018 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using the predicted heat strain model (ISO/DIS 7933:2018); German and English version prEN ISO 7933:2018
DIN EN ISO 7933:2021-12 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO/DIS 7933.2:2021); German and English version prEN ISO 7933:2021 / Note: Date of issue 2021-10-29*Inte...
DIN EN ISO 7933:2004-12 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004); German version EN ISO 7933:2004 / Note: To be replaced by DIN EN ISO 7933 (2018-05), DIN ...
DIN 51820:2013-12 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum / Note: Applies in conjunction with DIN 51451 (2004-09).
DIN 51395-1:1999 Testing of metal working fluids - Testing in the VSI foam analyzer - Part 1: General working principles
DIN EN ISO 23674:2022-12 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022); German version EN ISO 23674:2022
DIN 53436-1:2015-12 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 1: Decomposition apparatus and determination of test temperature
DIN 10336:1994 Detection and determination of foreign fats in milk fat by gaschromatographic analysis of triglycerides
DIN EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005); English version of DIN EN ISO 7730:2006-05
DIN EN ISO 7730:2023-04 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO/DIS 7730:2023); German and English version prEN ISO 7730:2023 / ...
DIN EN ISO 7730 Berichtigung 1:2007-06 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005); German version EN ISO 7730:2005, Corrigenda to DIN E...
DIN EN ISO 7730:2006-05 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005); German version EN ISO 7730:2005
DIN EN ISO 7730:2023 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO/DIS 7730:2023); German and English version prEN ISO 7730:2023
DIN IEC 60746-4:1996 Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane covered amperometric sensors (IEC 60746-4:1992)

Society of Automotive Engineers (SAE), Function of thermal analyzer

SAE AMS5355J-2009 Steel, Corrosion Resistant, Investment Castings 16Cr 4.1Ni 0.28Cb 3.2Cu Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated

Professional Standard - Machinery, Function of thermal analyzer

JB/T 6298-1992 Test method of determining combustion characteristics of coal with thermal analyzer

ES-UNE, Function of thermal analyzer

UNE-EN ISO 23674:2023 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022)

ZA-SANS, Function of thermal analyzer

SANS 4044:2007 Methods for determination of fibre length by comb sorter diagram

未注明发布机构, Function of thermal analyzer

DIN EN IEC 60746-4:2019 Information on the operating behavior of electrochemical analyzers – Part 4: Dissolved oxygen in water using membrane-covered amperometric measuring cells
BSI Flex 236:2022 Enabling the development of inclusive standards – Understanding the role of data and data analysis – Guide
BS EN ISO 7730:2005(2006) Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria

Danish Standards Foundation, Function of thermal analyzer

DS/EN ISO 7933:2004 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
DS/EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria

DE-VDA, Function of thermal analyzer

VDA 278-2011 Thermal desorption analysis of organic emissions for the characterization of non-metallic materials for automobiles

AT-ON, Function of thermal analyzer

OENORM EN ISO 23674:2021 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition - Atomic absorption spectrometry (mercury analyzer) (ISO/DIS 23674:2021)

Japanese Industrial Standards Committee (JISC), Function of thermal analyzer

JIS K 6953:2000 Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide

GOSTR, Function of thermal analyzer

GOST R 57794-2017 Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain

CZ-CSN, Function of thermal analyzer

CSN ISO 4535:1992 Vitreous and porcelain enamels. Apparatus for determination of resistance to hot detergent solutions u?ed for washing textiles

CEN - European Committee for Standardization, Function of thermal analyzer

EN ISO 7730:1995 Moderate Thermal Environments - Determination of the PMV and PPD Indices and Specification of the Conditions for Thermal Comfort
EN ISO 6145-7:2018 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers

Lithuanian Standards Office , Function of thermal analyzer

LST EN ISO 7933:2004 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004)
LST EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005)

AENOR, Function of thermal analyzer

UNE-EN ISO 7933:2005 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004)
UNE-EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005)

Professional Standard - Electricity, Function of thermal analyzer

DL/T 1463-2015 Preparation of the working standard oil for transformer oil dissolved gas composition content in the analysis

International Electrotechnical Commission (IEC), Function of thermal analyzer

IEC 60746-4:2018 Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane-covered amperometric sensors
IEC 60746-4:1992 Expression of performance of electrochemical analyzers; part 4: dissolved oxygen in water measured by membrane covered amperometric sensors

Institute of Electrical and Electronics Engineers (IEEE), Function of thermal analyzer

NFPA (Fire) 1408 Standard for Training Fire Service Service Personnel in the Operation, Care, Use, and Maintenance of Thermal Imagers, 2020 Edition
IEEE 1554/COR-2013 Errata to Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis

Standard Association of Australia （SAA）, Function of thermal analyzer

AS 2986.1:2003 Workplace air quality - Sampling and anlysis of volatile organic compounds by solvent desorption/gas chromatography - Pumped sampling method

CN-STDBOOK, Function of thermal analyzer

图书 3-9750 Analysis of the "big misunderstanding" in the use of ISO, the thinking change of using the quality management system as a powerful management tool

AASHTO - American Association of State Highway and Transportation Officials, Function of thermal analyzer

TP 63-2009 Standard Method of Test for Determining Rutting Susceptibility of Hot Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)
T 340-2010 Standard Method of Test for Determining Rutting Susceptibility of Hot Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)
TP 63-2007 Standard Method of Test for Determining Rutting Susceptibility of Hot-Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)

The American Road & Transportation Builders Association, Function of thermal analyzer

AASHTO T 340-2010 Standard Method of Test for Determining Rutting Susceptibility of Hot Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)