ZH
RU
ES

Gas Flow Selection

Gas Flow Selection, Total:500 items.

In the international standard classification, Gas Flow Selection involves: Measurement of fluid flow, Air quality, Fluid power systems, Fluid storage devices, Valves, Products of the chemical industry, Non-destructive testing, Aerospace fluid systems and components, Aerospace electric equipment and systems, Materials and components for railway engineering, Equipment for petroleum and natural gas industries, Ventilators. Fans. Air-conditioners, Explosion protection, Electrical equipment for working in special conditions, Installations in buildings, Water quality, Analytical chemistry, Coals, Test conditions and procedures in general, Alarm and warning systems, Quality, Company organization and management, Measurement of volume, mass, density, viscosity, Welding, brazing and soldering, Pharmaceutics, Lubricants, industrial oils and related products, Hydraulic fluids, Sensory analysis, Radiation measurements, Environmental protection, Soil quality. Pedology, Vocabularies, Electrical accessories, Corrosion of metals, Compressors and pneumatic machines, Domestic, commercial and industrial heating appliances, Electrical wires and cables, Electrical engineering in general, Metrology and measurement in general, Fuels, Safety of machinery, Aircraft and space vehicles in general.


Compressed Gas Association (U.S.), Gas Flow Selection

  • CGA E-7-2013 MEDICAL GAS PRESSURE REGULATORS, FLOWMETERS, AND ORIFICE FLOW SELECTORS
  • CGA E-8-2007 GAS FLOWMETERS SECOND EDITION
  • CGA S-7-2013 STANDARD METHOD FOR SELECTING PRESSURE RELIEF DEVICES FOR COMPRESSED GAS MIXTURES IN CYLINDERS

IETF - Internet Engineering Task Force, Gas Flow Selection

Korean Agency for Technology and Standards (KATS), Gas Flow Selection

  • KS B ISO TR 8363-2003(2013) Measurement of liquid flow in open channels－General guidelines for selection of method
  • KS B ISO TR 8363:2003 Measurement of liquid flow in open channels-General guidelines for selection of method
  • KS B ISO TR 8363:2015 Measurement of liquid flow in open channels－General guidelines for selection of method
  • KS B ISO 10790-2003(2018) Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
  • KS B ISO 5145:2008 Cylinder valve outlets for gases and gas mixtures-Selection and dimensioning
  • KS B ISO 5145:2014 Cylinder valve outlets for gases and gas mixtures－Selection and dimensioning
  • KS B ISO 10790:2003 Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
  • KS B ISO 10298:2021 Gas cylinders — Gases and gas mixtures — Determination of toxicity for the selection of cylinder valve outlets
  • KS B ISO 5145-2008(2013) Cylinder valve outlets for gases and gas mixtures－Selection and dimensioning
  • KS B ISO TS 15768:2020 Measurement of liquid velocity in open channels —Design, selection and use of electromagnetic current meters
  • KS B ISO 13338:2018 Gas cylinders — Gases and gas mixtures — Determination of tissue corrosiveness for the selection of cylinder valve outlets
  • KS I ISO 17353:2010 Water quality－Determination of selected organotin compounds－Gas chromatographic method
  • KS B ISO 8368:2021 Hydrometric determinations — Flow measurements in open channels using structures — Guidelines for selection of structure
  • KS B ISO 8368:2015 Hydrometric determinations — Flow measurements in open channels using structures — Guidelines for selection of structure
  • KS C 6599-2007 Installation, operation and maintenance of combustible gases detection instruments in domestic premises
  • KS Q ISO 10019:2011 Guidelines for the selection of quality management system consultants and use of their services
  • KS B ISO 10156:2018 Gas cylinders — Gases and gas mixtrures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
  • KS C IEC 61779-6:2003 Electrical apparatus for the detection and measurement of flammable gases－Part 6：Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
  • KS B ISO 10156:2003 Gases and gas mixtures-Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
  • KS B ISO 10156:2013 Gases and gas mixtrures ― Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
  • KS B ISO 10156-2023 Selection of cylinder valve vents for gases and gas mixtures Determination of fire hazard and oxidizing capacity
  • KS C IEC 60364-5-523:2002 Electrical installations of buildings－Part 5：Selection and erection of electrical equipment－Chapter 52：Wiring systems－Section 523：Current－carrying capacities
  • KS Q ISO 10019-2011(2021) Guidelines for the selection of quality management system consultants and use of their services
  • KS B ISO 8368:2014 Hydrometric determinations Flow measurements in open channels using structures Guidelines for selection of structure
  • KS B ISO 8368:2004 Hydrometric determinations Flow measurements in open channels using structures Guidelines for selection of structure
  • KS C IEC 61779-6-2003(2018)
  • KS B ISO 4064-2:2002 Measurement of water flow in closed conduits－Meters for cold potable water－Part 2：Installation requirements and selection
  • KS B ISO 4064-2-2002(2017) Measurement of water flow in closed conduits－Meters for cold potable water－Part 2：Installation requirements and selection
  • KS B ISO 9300-2014(2019) Measurement of gas flow by means of critical flow Venturi nozzles
  • KS B ISO 9300:2004 Measurement of gas flow by means of critical flow Venturi nozzles
  • KS B ISO 9300:2014 Measurement of gas flow by means of critical flow Venturi nozzles
  • KS B ISO 4064-2-2002(2022) Measurement of water flow in closed conduits－Meters for cold potable water－Part 2：Installation requirements and selection
  • KS C IEC 60079-29-2:2012 Explosive atmospheres－Part 29-2：Gas detectors－Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • KS C IEC 60079-29-2-2012(2017) Explosive atmospheres－Part 29-2：Gas detectors－Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • KS C IEC 60079-29-2-2012(2022) Explosive atmospheres－Part 29-2：Gas detectors－Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • KS B 6931-2005(2010) Pneumatic fluid power－Determination of flow-ratecharacteristics of pneumatic control valves
  • KS B 6931-2013 Pneumatic fluid power－Determination of flow-ratecharacteristics of pneumatic control valves
  • KS C IEC 60364-5-54-2014(2019) Low-voltage electrical installations — Part 5-54: Selection and erection of electrical equipment — Earthing arrangements and protective conductors
  • KS C IEC 61643-312-2016(2021) COMPONENTS FOR LOW–VOLTAGE SURGE PROTECTIVE DEVICES – Part 312: Selection and application principles for gas discharge tubes
  • KS B 6931-2005 Pneumatic fluid power-Determination of flow-ratecharacteristics of pneumatic control valves
  • KS I ISO 10780-2008(2018) Stationary source emissions－Measurement of velocity and volume flowrate of gas streams in ducts

International Organization for Standardization (ISO), Gas Flow Selection

  • ISO 8368:1985 Liquid flow measurement in open channels; Guidelines for the selection of flow gauging structures
  • ISO 8363:1986 Liquid flow measurement in open channels; General guidelines for the selection of methods
  • ISO/TR 8363:1997 Measurement of liquid flow in open channels — General guidelines for selection of method
  • ISO 5145:2004 Cylinder valve outlets for gases and gas mixtures - Selection and dimensioning
  • ISO 5145:2014 Cylinder valve outlets for gases and gas mixtures - Selection and dimensioning
  • ISO 5145:1990 Cylinder valve outlets for gases and gas mixtures; selection and dimensioning
  • ISO 10790:1999/Amd 1:2003 Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements); Amendment 1: Guidance for gas measurement
  • ISO 5145:2017 Gas cylinders - Cylinder valve outlets for gases and gas mixtures - Selection and dimensioning
  • ISO 10298:2018 Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets
  • ISO 10790:1999 Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
  • ISO 10790:2015 Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
  • ISO 13338:2017 Gas cylinders - Gases and gas mixtures - Determination of tissue corrosiveness for the selection of cylinder valve outlets
  • ISO/TS 15768:2000 Measurement of liquid velocity in open channels - Design, selection and use of electromagnetic current meters
  • ISO 13338:2022 Gas cylinders — Gases and gas mixtures — Determination of corrosiveness for the selection of cylinder valve outlet
  • ISO 10298:2018/Amd 1:2021 Gas cylinders — Gases and gas mixtures — Determination of toxicity for the selection of cylinder valve outlets — Amendment 1
  • ISO 8368:2019 Hydrometric determinations — Flow measurements in open channels using structures — Guidelines for selection of structure
  • ISO 5145:2004/Amd 1:2006 Cylinder valve outlets for gases and gas mixtures - Selection and dimensioning; Amendment 1: Cylinder valve outles for gases for medical use
  • ISO 5145:2004/Amd 2:2008 Cylinder valve outlets for gases and gas mixtures — Selection and dimensioning — Amendment 2
  • ISO 10156:1996 Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
  • ISO 17353:2004 Water quality - Determination of selected organotin compounds - Gas chromatographic method
  • ISO 9300:2022 Measurement of gas flow by means of critical flow nozzles
  • ISO 10156:1990 Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
  • ISO 10156:2010 Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
  • ISO 10156:2017 Gas cylinders - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
  • ISO 8368:1999 Hydrometric determinations - Flow measurements in open channels using structures - Guidelines for selection of structure
  • ISO 4064-2:2001 Measurement of water flow in closed conduits - Meters for cold potable water - Part 2: Installation requirements and selection
  • ISO 23161:2009 Soil quality - Determination of selected organotin compounds - Gas-chromatographic method
  • ISO 23161:2018 Soil quality - Determination of selected organotin compounds - Gas-chromatographic method
  • ISO 9300:2005 Measurement of gas flow by means of critical flow Venturi nozzles
  • ISO 9300:1990 Measurement of gas flow by means of critical flow Venturi nozzles
  • ISO 10019:2005 Guidelines for the selection of quality management system consultants and use of their services
  • ISO 20951:2019 Soil Quality — Guidance on methods for measuring greenhouse gases (CO2, N2O, CH4) and ammonia (NH3) fluxes between soils and the atmosphere
  • ISO 21457:2010 Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems
  • ISO/TR 6566-1:1980 Gas analysis; Determination of sulphur dioxide; Part 1 : General guidance for the choice of methods
  • ISO/TR 6567-1:1981 Gas analysis; Determination of carbon dioxide; Part 1 : General guidance for the choice of methods
  • ISO/TR 16203:2016 Corrosion of metals and alloys - Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
  • ISO 10156:2010/cor 1:2010 Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets; Technical Corrigendum 1
  • ISO 15537:2022 Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs
  • ISO/DIS 24062 Measurement of fluid flow in closed conduits — Clamp-on ultrasonic transit-time meters for liquids and gases
  • ISO/FDIS 24062:2023 Measurement of fluid flow in closed conduits — Clamp-on ultrasonic transit-time meters for liquids and gases

未注明发布机构, Gas Flow Selection

  • BS 7405:1991(2000) Guide to Selection and application of flowmeters for the measurement of fluid flow in closed conduits
  • BS ISO/TR 8363:1997(1999) Measurement of liquid flow in open channels — General guidelines for the selection of method
  • BS ISO TS 15768:2000 Measurement of liquid velocity in open channels - Design , selection and use of electromagnetic current meters
  • DIN EN ISO 9300:1995 Measurement of gas flow by means of critical flow Venturi nozzles
  • BS EN 60534-2-1:2011(2015) Industrial - process control valves - Part 2 - 1 : Flow capacity — Sizing equations for fluid flow under installed conditions

British Standards Institution (BSI), Gas Flow Selection

  • BS 7405:1991 Guide to selection and application of flowmeters for the measurement of fluid flow in closed conduits
  • BS ISO TR 8363:1998 Measurement of liquid flow in open channels - General guidelines for the selection of method
  • BS ISO/TS 15768:2000 Measurement of liquid velocity in open channels - Design, selection and use of electromagnetic current meters
  • BS ISO 5145:2014 Cylinder valve outlets for gases and gas mixtures. Selection and dimensioning
  • BS ISO 5145+A2:2008 Cylinder valve outlets for gases and gas mixtures. Selection and dimensioning
  • BS ISO 5145:2004+A2:2008 Cylinder valve outlets for gases and gas mixtures - Selection and dimensioning
  • PD ISO/TR 10946:2019 Tracked Changes. Hydraulic fluid power. Gas-loaded accumulators with separator. Selection of preferred hydraulic ports
  • BS ISO 10790:2015 Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
  • BS 7965:2000 The selection, installation, operation and calibration of diagonal path transit time ultrasonic flowmeters for industrial gas applications
  • BS EN ISO 10298:2020+A1:2022 Gas cylinders. Gas and gas mixtures. Determination of toxicity for the selection of cylinder valve outlets
  • BS EN ISO 10298:2020 Gas cylinders. Gases and gas mixtures. Determination of toxicity for the selection of cylinder valve outlets
  • BS EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
  • BS EN 13625:2002(2007) Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
  • BS ISO 10790:1999 Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
  • PD IEC/TR 60787:2007 Application guide for the selection of high-voltage current-limiting fuse-links for transformer circuits
  • BS 7965:2009 Guide to the selection, installation, operation and calibration of diagonal path transit time ultrasonic flowmeters for industrial gas applications
  • BS 7965:2013 Guide to the selection, installation, operation and calibration of diagonal path transit time ultrasonic flowmeters for industrial gas applications
  • BS EN 14412:2004 Indoor air quality - Diffusive samplers the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
  • BS EN 14412:2004(2009) Indoor air quality - Diffusive samplers the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
  • 21/30428195 DC BS ISO 10298 AMD1. Gas cylinders. Gases and gas mixtures. Determination of toxicity for the selection of cylinder valve outlets
  • BS ISO 5145:2017 Tracked Changes. Gas cylinders. Cylinder valve outlets for gases and gas mixtures. Selection and dimensioning
  • BS EN ISO 13338:2020 Gas cylinders. Gases and gas mixtures. Determination of tissue corrosiveness for the selection of cylinder valve outlets
  • BS ISO 8368:2019 Hydrometric determinations. Flow measurements in open channels using structures. Guidelines for selection of structure
  • BS EN ISO 10156:2010 Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
  • BS EN ISO 10156:2017 Gas cylinders. Gases and gas mixtures. Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
  • BS EN 60079-29-2:2015 Tracked Changes. Explosive atmospheres. Gas detectors. Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • BS EN 13528-3:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Guide to selection, use and maintenance
  • BS EN 13528-3:2003(2008) Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Guide to selection, use and maintenance
  • BS EN ISO 11114-4:2017 Tracked Changes. Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Test methods for selecting steels resistant to hydrogen embrittlement
  • BS EN 50073:1999 Guide for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen
  • BS EN 60079-29-2:2007 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • BS EN 60079-29-2:2008 Explosive atmospheres. Gas detectors. Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • BS EN IEC 62990-2:2021 Workplace atmospheres. Gas detectors. Selection, installation, use and maintenance of detectors for toxic gases and vapours
  • BS EN ISO 9300:2005 Measurement of gas flow by means of critical flow Venturi nozzles
  • 21/30414573 DC BS EN ISO 9300. Measurement of gas flow by means of critical flow nozzles
  • BS EN ISO 9300:2022 Tracked Changes. Measurement of gas flow by means of critical flow nozzles
  • BS 5857-2.1:1980 Methods for measurement of fluid flow in closed conduits, using tracers. Measurement of gas flow. General
  • BS EN ISO 21457:2010 Petroleum, petrochemical and natural gas industries. Materials selection and corrosion control for oil and gas production systems
  • BS EN 61643-312:2013 Components for low-voltage surge protective devices. Selection and application principles for gas discharge tubes
  • BS PD ISO/TR 16203:2016 Corrosion of metals and alloys. Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
  • BS ISO 10019:2005 Guidelines for the selection of quality management system consultants and use of their services
  • BS ISO 8368:1999 Hydrometric determinations - Flow measurements in open channels using structures - Guidelines for the selection of structure
  • 19/30362970 DC BS EN 62990-2. Workplace atmospheres. Part 2. Gas detectors. Selection, installation, use and maintenance of detectors for toxic gases and vapours and oxygen
  • PD ISO/TR 16203:2016 Corrosion of metals and alloys. Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
  • PD ISO/TR 15640:2011 Hydraulic fluid power contamination control. General principles and guidelines for selection and application of hydraulic filters
  • BS 7834:1995 Specification for turbine meters used for the measurement of gas flow in closed conduits
  • BS EN 17322:2020 Environmental Solid Matrices. Determination of polychlorinated biphenyls (PCB) by gas chromatography. mass selective detection (GC-MS) or electron-capture detection (GC-ECD)

IN-BIS, Gas Flow Selection

YU-JUS, Gas Flow Selection

ESDU - Engineering Sciences Data Unit, Gas Flow Selection

  • ESDU 88018-1988 Selection of alloys for hydrodynamic bearings.
  • ESDU 03016-2003 Selection of lubricant class (liquids@ solids@ semi-solids and gases)
  • ESDU 80012 A-2002 Dynamic sealing of fluids. I: guide to selection of rotary seals.
  • ESDU 80012-1980 DYNAMIC SEALING OF FLUIDS. 1: GUIDE TO SELECTION OF ROTARY SEALS
  • ESDU 81004-1981 Mass flow and momentum functions for one-dimensional flow of gas in ducts.

Society of Automotive Engineers (SAE), Gas Flow Selection

  • SAE AIR1244-1973 SELECTING SLIPPER SEALS FOR HYDRAULIC-PNEUMATIC FLUID POWER APPLICATIONS
  • SAE AIR1047C-1994 A GUIDE FOR THE SELECTION OF QUICK-DISCONNECT COUPLINGS FOR AEROSPACE FLUID SYSTEMS
  • SAE AIR1047A-1969 A GUIDE FOR THE SELECTION OF QUICK-DISCONNECT COUPLINGS FOR AEROSPACE FLUID SYSTEMS
  • SAE AIR1047B-1976 A GUIDE FOR THE SELECTION OF QUICK-DISCONNECT COUPLINGS FOR AEROSPACE FLUID SYSTEMS
  • SAE AIR1047-1968 A GUIDE FOR THE SELECTION OF QUICK-DISCONNECT COUPLINGS FOR AEROSPACE FLUID SYSTEMS
  • SAE ARP1199A-1990 SELECTION, APPLICATION, and INSPECTION of ELECTRIC OVERCURRENT PROTECTIVE DEVICES
  • SAE ARP1199-1972 SELECTION, APPLICATION, and INSPECTION of ELECTRIC OVERCURRENT PROTECTIVE DEVICES
  • SAE AIR1047D-2013 A Guide for the Selection of Quick-Disconnect Couplings for Aerospace Fluid Systems
  • SAE AIR1047E-2020 A Guide for the Selection of Quick-Disconnect Couplings for Aerospace Fluid Systems
  • SAE AIR1244B-2022 Aerospace, Slipper Seals, Selection for Fluid Power Applications
  • SAE ARP1199B-1998 (R) Selection, Application, and Inspection of Electric Overcurrent Protective Devices
  • SAE ARP1802A-1992 Selection and Application of Polytetrafluoroethylene (PTFE or TFE) Backup Rings for Hydraulic and Pneumatic Fluid Power Applications
  • SAE ARP1802-1983 SELECTION AND APPLICATION OF POLYTETRAFLUOROETHYLENE (PTFE OR TFE) BACKUP RINGS FOR HYDRAULIC AND PNEUMATIC FLUID POWER APPLICATIONS
  • SAE AIR1047D-2000 A Guide for the Selection of Quick-Disconnect Couplings for Aerospace Fluid Systems
  • SAE AIR4918-2013 Industry Practices and Guidelines for the Selection of Coiled Tubes, Flexible Hoses, Swivels, and Extension Fittings for Aircraft Fluid Systems

Association of German Mechanical Engineers, Gas Flow Selection

  • VDI 2066 Blatt 5-1994 Particulate matter measurement - Dust measurement in flowing gases; particle size selective measurement by impaction method - Cascade impactor
  • VDI/VDE 3513 Blatt 3-1989 Variable-area flowmeters; selection and installation recommendations
  • VDI 3481 Blatt 6-1994 Gaseous emission measurement - Choice and application of methods of measuring total gaseous organic carbon
  • DVS 2707-1997 "Plasma welding - Survey of methods, selection of gases and characteristic values for welding"
  • DVS 2707-1979 "Plasma welding; survey of methods, selection of gases and characteristic values for welding"

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Gas Flow Selection

  • ASHRAE SF-98-10-1-1998 Selection of Turbulence Models for Prediction of Room Airflow
  • ASHRAE LO-09-062-2009 Evaluation of Typical Weather Year Selection Approaches for Energy Analysis of Buildings
  • ASHRAE SF-98-23-1998 Symposium on Selection and Application of Control Valves and Balancing Valves Operating in Variable-Flow Hydronic Pumping Systems
  • ASHRAE OR-10-045-2010 Impact of Typical Weather Year Selection Approaches on Energy Analysis of Buildings (RP-1477)

KR-KS, Gas Flow Selection

  • KS B ISO 10790-2003(2023) Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
  • KS B ISO 10298-2021 Gas cylinders — Gases and gas mixtures — Determination of toxicity for the selection of cylinder valve outlets
  • KS B ISO TS 15768-2020 Measurement of liquid velocity in open channels —Design, selection and use of electromagnetic current meters
  • KS B ISO 13338-2018(2023) Gas cylinders — Gases and gas mixtures — Determination of tissue corrosiveness for the selection of cylinder valve outlets
  • KS B ISO 8368-2015 Hydrometric determinations — Flow measurements in open channels using structures — Guidelines for selection of structure
  • KS B ISO 13338-2018 Gas cylinders — Gases and gas mixtures — Determination of tissue corrosiveness for the selection of cylinder valve outlets
  • KS B ISO 8368-2021 Hydrometric determinations — Flow measurements in open channels using structures — Guidelines for selection of structure
  • KS B ISO 10156-2018 Gas cylinders — Gases and gas mixtrures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
  • KS B ISO 10156-2018(2023) Gas cylinders — Gases and gas mixtrures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
  • KS C IEC 60364-5-523-2002 Electrical installations of buildings－Part 5：Selection and erection of electrical equipment－Chapter 52：Wiring systems－Section 523：Current－carrying capacities

Japanese Industrial Standards Committee (JISC), Gas Flow Selection

  • JIS B 8399:2002 Hydraulic fluid power -- Gas-loaded accumulators with separator -- Selection of preferred hydraulic ports
  • JIS Z 8767:2006 Measurement of gas flow by means of critical flow Venturi nozzles
  • JIS Q 10019:2005 Guidelines for the selection of quality management system consultants and use of their services
  • JIS C 0364-5-523:1999 Electrical installations of buildings Part 5: Selection and erection of electrical equipment Chapter 52: Wiring systems Section 523: Current-carrying capacities
  • JIS C 0364-5-523:2002 Electrical installations of buildings -- Part 5: Selection and erection of electrical equipment -- Section 523: Current-carrying capacities in wiring systems
  • JIS C 60364-5-54:2023 Low-voltage electrical installations -- Part 5-54: Selection and erection of electrical equipment -- Earthing arrangements and protective conductors

Standard Association of Australia （SAA）, Gas Flow Selection

  • AS 3778.2.1:2001 Measurement of water flow in open channels - General - Guidelines for the selection of methods
  • AS 3778.2.5:2001 Measurement of water flow in open channels - General - Guidelines for the selection of flow gauging structures
  • AS 3778.2.5:2022 Measurement of water flow in open channels, Part 2.5: General — Guidelines for the selection of flow-gauging structures (ISO 8368:2019, IDT)
  • AS/NZS 2381 Set:2008 Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance Set
  • AS/NZS 61779.6:2000 Electrical apparatus for the detection and measurement of flammable gases Part 6: Guide for the selection,installation,use and maintenance of apparatus for the detection and measurement of flammable gases
  • AS/NZS 2381.2:2006 Electrical equipment for explosive atmospheres - Selection, installation and maintenance - Flameproof enclosure ?d?
  • AS/NZS 2381.1:2005 Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance - General requirements
  • AS 3778.2.2:2022 Measurement of water flow in open channels, Part 2.2: General — Selection, establishment and operation of a gauging station (ISO 18365:2013, IDT)
  • AS/NZS 60079.29.2:2016 Explosive atmospheres, Part 29.2: Gas detectors — Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • AS/NZS 2381 Set(CD):2008 Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance Set on CD
  • AS/NZS 2381.1/AMD 2:2006 Electrical equipment for explosive gas atmospheres—Selection, installation and maintenance Part 1: General requirements; Amendment No. 2

Association Francaise de Normalisation, Gas Flow Selection

  • NF E29-764:2014 Cylinder valve outlets for gases and gas mixtures - Selection and dimensioning
  • NF E29-764*NF ISO 5145:2018 Gas cylinders - Cylinder valve outlets for gases and gas mixtures - Selection and dimensioning
  • NF X43-063*NF EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentration of gases and vapours - Guide for selection, use and maintenance
  • NF EN ISO 10298:2020 Bouteilles à gaz - Gaz et mélanges de gaz - Détermination de la toxicité pour le choix des raccords de sortie de robinets
  • NF E29-646/A1*NF ISO 10298/A1:2022 Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets - AMENDMENT 1
  • NF EN 13625:2002 Essais non destructifs - Contrôle d'étanchéité - Guide pour la sélection des instruments utilisés pour le mesurage des fuites gazeuses
  • NF F80-200:1988 Rolling stock. Tubes for fluid pipes. Materials and sizes. Selection.
  • NF EN ISO 13338:2022 Bouteilles à gaz - Gaz et mélanges de gaz - Détermination de la corrosivité pour le choix des raccords de sortie de robinets
  • FD CEN/TR 14489:2005 Fluides difficilement inflammables - Classification et spécifications - Principes directeurs de sélection de fluides et de considération des risques de sécurité et d'environnement
  • NF EN 3717:2008 Série aérospatiale - Tubes - Sélection pour circuits de fluide pour application moteurs
  • NF EN ISO 10298/A1:2022 Bouteilles à gaz - Gaz et mélanges de gaz - Détermination de la toxicité pour le choix des raccords de sortie de robinets - Amendement 1
  • NF ISO 10298/A1:2022 Bouteilles à gaz - Gaz et mélanges de gaz - Détermination de la toxicité pour le choix des raccords de sortie de robinets - AMENDEMENT 1
  • NF X20-350:1979 Gas analysis. Sulfur dioxide analysis. Guide for the choice of the analysis methods.
  • NF X20-380:1979 Gas analysis. Carbon dioxide analysis. Guide for the choice of the analysis methods.
  • NF EN 14412:2004 Qualité de l'air intérieur - Échantillonnage par diffusion pour la détermination de la concentration des gaz et des vapeurs - Guide pour la sélection, l'utilisation et la maintenance
  • NF E29-644*NF EN ISO 10156:2017 Gas cylinders - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
  • NF X15-111:1993 Measurement of air moisture. General information on measuring instruments. Selection guide.
  • NF ISO 5145:2018 Bouteilles à gaz - Raccords de sortie de robinets de bouteilles à gaz et mélanges de gaz - Choix et dimensionnement
  • FD ISO 10019:2005 Lignes directrices pour la sélection de consultants en systèmes de management de la qualité et pour l'utilisation de leurs services
  • NF EN ISO 10156:2017 Bouteilles à gaz - Gaz et mélanges de gaz - Détermination du potentiel d'inflammabilité et d'oxydation pour le choix des raccords de sortie de robinets
  • FD X15-111:2004 Mesure de l'humidité de l'air - Généralités sur les instruments de mesure - Guide de choix et d'utilisation
  • NF E29-732:2016 Gas containers - Cylinders and containers for compressed hydrogen -Test method for selecting construction materials
  • FD C17-205:2017 Installations électriques extérieures - Détermination des sections des conducteurs et choix des dispositifs de protection
  • NF C23-544:2000 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance.
  • NF C23-544*NF EN 50244:2016 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance
  • NF E29-644:2010 Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets.
  • FD X50-188*FD ISO 10019:2005 Guidelines for the selection of quality management system consultants and use of their services
  • NF E29-648-4*NF EN ISO 11114-4:2017 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4 : Test methods for selecting steels resistant to hydrogen embrittlement
  • NF EN IEC 62990-2:2021 Atmosphères des lieux de travail - Partie 2 : détecteurs de gaz - Sélection, installation, utilisation et maintenance des détecteurs de gaz et de vapeurs toxiques
  • NF V09-023*NF ISO 13301:2018 Sensory analysis - Methodology - General guidance for measuring odour, flavour and taste detection thresholds by a three-alternative forced-choice (3-AFC) procedure
  • NF X31-441*NF EN ISO 23161:2018 Soil quality - Determination of selected organotin compounds - Gas-chromatographic method
  • FD C17-205/A1:2019 Outdoor electrical installation - Determination of the cross-sectional area of conductors and selection of protective devices
  • NF X10-150*NF EN ISO 9300:2005 Measurement of gas flow by means of critical flow Venturi nozzles
  • NF X10-150:1995 Measurement of gas flow by means of critical flow venturi nozzles.
  • NF EN 50244:2016 Appareils électriques pour la détection des gaz combustibles dans les locaux à usage domestique - Guide de sélection, d'installation, d'utilisation et de maintenance
  • NF EN 60534-2-1:2011 Vannes de régulation des processus industriels - Partie 2-1 : capacité d'écoulement - Équations de dimensionnement pour l'écoulement des fluides dans les conditions d'installation
  • NF C23-300-2*NF EN IEC 62990-2:2021 Workplace atmospheres - Part 2 : gas detectors - Selection, installation, use and maintenance of detectors for toxic gases and vapours
  • NF C23-579-29-2*NF EN 60079-29-2:2018 Explosive atmospheres - Part 29-2 : gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • NF EN 60079-29-2:2018 Atmosphères explosives Partie 29-2 : détecteurs de gaz - Sélection, installation, utilisation et maintenance des détecteurs de gaz inflammables et d'oxygène
  • NF M87-275*NF EN ISO 21457:2013 Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems
  • NF EN 61643-312:2014 Composants pour parafoudres basse tension - Partie 312 : principes de choix et d'application pour tubes à décharge de gaz
  • NF X43-060-3*NF EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3 : guide to selection, use and maintenance.
  • NF EN ISO 11114-4:2017 Bouteilles à gaz transportables - Compatibilité des matériaux et des robinets avec les contenus gazeux - Partie 4 : Méthodes d'essai pour le choix de matériaux métalliques résistants à la fragilisation par l'hydrogène
  • NF D35-001:1965 Choice of an individual heating unit (solid, liquid and gaseous fuels) according to the volume to be heated.
  • NF C23-579-29-2:2008 Explosive atmospheres - Part 29-2 : gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen.
  • FD A05-013*FD ISO/TR 16203:2016 Corrosion of metals and alloys - Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
  • NF EN 13528-3:2004 Qualité de l'air ambiant - Échantillonneurs par diffusion pour la détermination de la concentration des gaz et vapeurs - Exigences et méthodes d'essai - Partie 3 : guide pour la sélection, l'utilisation et la maintenance
  • FD C15-500:2020 Installations électriques à basse tension - Détermination des sections des conducteurs et choix des dispositifs de protection à l'aide de logiciels de calcul
  • NF C46-504:1993 INDUSTRIAL-PROCESS CONTROL VALVES. PART 2 : FLOW CAPACITY. SECTION TWO : SIZING EQUATIONS FOR COMPRESSIBLE FLUID FLOW UNDER INSTALLED CONDITIONS. (EUROPEAN STANDARD EN 60 534-2-2).

Professional Standard - Energy, Gas Flow Selection

  • DL/T 5584-2020 Design rules for selection of conductors and electrical appliances in converter stations

American Gas Association, Gas Flow Selection

ES-UNE, Gas Flow Selection

  • UNE-EN 3717:2008 Aerospace series - Tubes - Selection for engines fluid systems (Endorsed by AENOR in May of 2008.)
  • UNE-EN ISO 10298:2021 Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets (ISO 10298:2018)
  • UNE-EN ISO 13338:2023 Gas cylinders - Gases and gas mixtures - Determination of corrosiveness for the selection of cylinder valve outlet (ISO 13338:2022)
  • UNE-EN ISO 10298:2021/A1:2023 Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets - Amendment 1 (ISO 10298:2018/Amd 1:2021)
  • UNE-EN ISO 9300:2023 Measurement of gas flow by means of critical flow nozzles (ISO 9300:2022)
  • UNE-EN IEC 62990-2:2022 Workplace atmospheres - Part 2: Gas detectors - Selection, installation, use and maintenance of detectors for toxic gases and vapours.
  • UNE-EN 50244:2018 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance
  • UNE-EN 60534-2-1:2011/AC:2015 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (Endorsed by AENOR in June of 2015.)
  • UNE-EN 60534-2-1:2011 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (Endorsed by AENOR in September of 2011.)
  • UNE-EN 60079-29-2:2016 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • UNE-HD 60364-5-54:2015/A11:2018 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
  • UNE-HD 60364-5-54:2015/A1:2023 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors

IT-UNI, Gas Flow Selection

  • UNI EN ISO 10298:2020 Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets
  • UNI EN ISO 13338:2021 Gas cylinders - Gases and gas mixtures - Determination of tissue corrosiveness for the selection of cylinder valve outlets

Professional Standard - Aviation, Gas Flow Selection

  • HB/Z 403-2013 Selection and Application Guidelines for Electrical Overcurrent Protection Devices

European Committee for Standardization (CEN), Gas Flow Selection

  • EN 13625:2001 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
  • EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
  • prEN ISO 13338:2021 Gas cylinders - Gases and gas mixtures - Determination of corrosiveness for the selection of cylinder valve outlet (ISO/DIS 13338:2021)
  • EN 12261:2018 Gas meters - Turbine gas meter
  • EN ISO 11114-4:2017 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
  • EN ISO 9300:1995 Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles (ISO 9300 : 1990)
  • EN ISO 9300:2022 Measurement of gas flow by means of critical flow nozzles (ISO 9300:2022)
  • prEN ISO 9300:2021 Measurement of gas flow by means of critical flow nozzles (ISO/DIS 9300:2021)
  • EN ISO 21457:2010 Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems (ISO 21457:2010)
  • EN 13528-3:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance
  • EN ISO 9300:2005 Measurement of gas flow by means of critical flow Venturi nozzles (ISO 9300:2005)
  • EN ISO 10156:2010 Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets (Incorporating Corrigendum September 2010)

Danish Standards Foundation, Gas Flow Selection

  • DS/EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
  • DS/EN 3717:2008 Aerospace series - Tubes - Selection for engines fluid systems
  • DS/EN ISO 10156/AC:2010 Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
  • DS/EN ISO 10156:2010 Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
  • DS/EN ISO 13338:2020 Gas cylinders – Gases and gas mixtures – Determination of tissue corrosiveness for the selection of cylinder valve outlets (ISO 13338:2017)
  • DS/EN 50244:2000 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance
  • DS/EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
  • DS/ISO 10019:2005 Guidelines for the selection of quality management system consultants and use of their services
  • DS/EN IEC 62990-2:2021 Workplace atmospheres – Part 2: Gas detectors – Selection, installation, use and maintenance of detectors for toxic gases and vapours
  • DS/ISO 13301:2002 Sensory analysis - Methodology - General guidance for measuring odour, flavour and taste detection thresholds by a three-alternative forced-choice (3-AFC) procedure
  • DS/EN ISO 9300:2007 Measurement of gas flow by means of critical flow Venturi nozzles
  • DS/EN ISO 23161:2011 Soil quality - Determination of selected organotin compounds - Gas-chromatographic method
  • DS/EN 60079-29-2/Corr. 1:2008 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • DS/EN 60079-29-2:2008 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • DS/HD 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors

Lithuanian Standards Office , Gas Flow Selection

  • LST EN 13625-2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
  • LST EN 3717-2008 Aerospace series - Tubes - Selection for engines fluid systems
  • LST EN ISO 10298:2020 Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets (ISO 10298:2018)
  • LST EN ISO 13338:2020 Gas cylinders - Gases and gas mixtures - Determination of tissue corrosiveness for the selection of cylinder valve outlets (ISO 13338:2017)
  • LST EN 14412-2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
  • LST EN ISO 10156:2010 Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets (ISO 10156:2010)
  • LST EN ISO 9300:2005 Measurement of gas flow by means of critical flow Venturi nozzles (ISO 9300:2005)
  • LST EN ISO 11114-4:2005 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement (ISO 11114-4:2005)
  • LST EN IEC 62990-2:2021 Workplace atmospheres - Part 2: Gas detectors - Selection, installation, use and maintenance of detectors for toxic gases and vapours (IEC 62990-2:2021)
  • LST ISO 10019:2007 Guidelines for the selection of quality management system consultants and use of their services (identical ISO 10019:2005)

German Institute for Standardization, Gas Flow Selection

  • DIN EN ISO 10298:2022-12 Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets (ISO 10298:2018 + Amd 1:2021); German version EN ISO 10298:2020 + A1:2022
  • DIN EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance; German version EN 14412:2004
  • DIN EN ISO 13338:2022-10 Gas cylinders - Gases and gas mixtures - Determination of corrosiveness for the selection of cylinder valve outlet (ISO 13338:2022); German version EN ISO 13338:2022
  • DIN EN 3717:2008-12 Aerospace series - Tubes - Selection for engines fluid systems; German and English version EN 3717:2008
  • DIN EN 13625:2002-03 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage; German version EN 13625:2001
  • DIN EN 14412:2004-12 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance; German version EN 14412:2004
  • DIN EN ISO 9300:2021-09 Measurement of gas flow by means of critical flow nozzles (ISO/DIS 9300:2021); German and English version prEN ISO 9300:2021 / Note: Date of issue 2021-07-30*Intended as replacement for DIN EN ISO 9300 (2005-11).
  • DIN EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Part 3: Guide to selection, use and maintenance; German version EN 13528-3:2003
  • DIN EN 13528-3:2004-04 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Part 3: Guide to selection, use and maintenance; German version EN 13528-3:2003
  • DIN EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage; German version EN 13625:2001
  • DIN EN ISO 10298:2020 Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets (ISO 10298:2018); German version EN ISO 10298:2020
  • DIN 51509-2:1988 Lubricants; selection for lubricants for gears; semi-fluid lubricants
  • DIN EN ISO 13338:2020 Gas cylinders - Gases and gas mixtures - Determination of tissue corrosiveness for the selection of cylinder valve outlets (ISO 13338:2017); German version EN ISO 13338:2020
  • DIN EN ISO 10156:2017 Gas cylinders - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets (ISO 10156:2017)
  • DIN EN ISO 9300:2005 Measurement of gas flow by means of critical flow Venturi nozzles (ISO 9300:2005); English version of DIN EN ISO 9300
  • DIN EN ISO 11114-4:2017-09 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017); German version EN ISO 11114-4:2017
  • DIN EN ISO 10298:2022 Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets (ISO 10298:2018 + Amd 1:2021) (includes Amendment :2022)
  • DIN EN ISO 9300:2005-11 Measurement of gas flow by means of critical flow Venturi nozzles (ISO 9300:2005); German version EN ISO 9300:2005 / Note: To be replaced by DIN EN ISO 9300 (2021-09).
  • DIN EN ISO 9300:2023-11 Measurement of gas flow by means of critical flow nozzles (ISO 9300:2022); German version EN ISO 9300:2022
  • DIN SPEC 33402-6:2015-06 Ergonomics - Human body dimensions - Part 6: Guidelines on the correct selection and application of anthropometric data
  • DIN EN 60534-2-1:2012-01 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (IEC 60534-2-1:2011); German version EN 60534-2-1:2011 / Note: DIN EN 60534-2-1 (2000-03) and DIN EN 60534-2-1 Berichtigung 1 (2003...
  • DIN EN 60534-2-1 Berichtigung 1:2015-11 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (IEC 60534-2-1:2011); German version EN 60534-2-1:2011, Corrigendum to DIN EN 60534-2-1:2012-01; (IEC-Cor.:2015 to IEC 60534-2-1:2011)
  • DIN EN 60079-29-2:2008 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen (IEC 60079-29-2:2007); German version EN 60079-29-2:2007
  • DIN VDE 0100-520 Bb.3:2012 Low-voltage electrical installations - Selection and erection of electrical equipment - Part 520: Wiring systems - Supplement 3: Current-carrying capacity of cables in three-phase distribution circuits at load currents with harmonic content
  • DIN EN ISO 11114-4:2017 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017)

United States Navy, Gas Flow Selection

AENOR, Gas Flow Selection

  • UNE-EN 13625:2002 Non-destructive testing. Lead test. Guide to the selection of instrumentation for the measurement of gas leakage.
  • UNE-EN 14412:2005 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
  • UNE-ISO 10019:2005 Guidelines for the selection of quality management system consultants and use of their services
  • UNE-EN ISO 10156:2010 Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets (ISO 10156:2010)
  • UNE-EN 50244:2001 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance.
  • UNE-EN 60079-29-2:2011 Explosive atmospheres -- Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • UNE-ISO 13301:2007 Sensory analysis. Methodology. General guidance for measuring odour, flavour and taste detection thresholds by a three-alternative forced-choice (3-AFC) procedure. (ISO 13301:2002)
  • UNE-EN ISO 11114-4:2017 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017)
  • UNE-EN ISO 9300:2006 Measurement of gas flow by means of critical flow Venturi nozzles (ISO 9300:2005)
  • UNE-HD 60364-5-54:2015 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
  • UNE-ISO 14154:2009 Soil quality -- Determination of some selected chlorophenols -- Gas-chromatographic method with electron-capture detection

SAE - SAE International, Gas Flow Selection

  • SAE ARP1199A-1984 Selection@ Application@ and Inspection of Electric Overcurrent Protective Devices
  • SAE AIR1047C-1989 Guide for the Selection of Quick- Disconnect Couplings for Aerospace Fluid Systems
  • SAE ARP1802B-2014 Selection and Application of Polytetrafluoroethylene (PTFE or TFE) Backup Rings for Hydraulic and Pneumatic Fluid Power Applications

American Society for Testing and Materials (ASTM), Gas Flow Selection

  • ASTM D5640-95(1999) Standard Guide for Selection of Weirs and Flumes for Open-Channel Flow Measurement of Water
  • ASTM D5640-95(2014) Standard Guide for Selection of Weirs and Flumes for Open-Channel Flow Measurement of Water
  • ASTM D5640-95(2003) Standard Guide for Selection of Weirs and Flumes for Open-Channel Flow Measurement of Water
  • ASTM D5640-95(2008) Standard Guide for Selection of Weirs and Flumes for Open-Channel Flow Measurement of Water
  • ASTM D7721-22 Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency
  • ASTM D7721-17 Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency
  • ASTM D6399-99a Standard Guide for Selecting Instruments and Methods for Measuring Air Quality In Aircraft Cabins
  • ASTM D6399-18 Standard Guide for Selecting Instruments and Methods for Measuring Air Quality in Aircraft Cabins
  • ASTM D5886-95(2011) Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
  • ASTM ISO/ASTM 51261-02 Standard Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing
  • ASTM D6399-04 Standard Guide for Selecting Instruments and Methods for Measuring Air Quality In Aircraft Cabins
  • ASTM D7721-11 Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency
  • ASTM D5886-95(2006) Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
  • ASTM D5886-95 Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
  • ASTM D5886-95(2001) Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
  • ASTM D5886-95(2023) Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
  • ASTM D6399-10 Standard Guide for Selecting Instruments and Methods for Measuring Air Quality In Aircraft Cabins

AT-ON, Gas Flow Selection

  • OENORM EN ISO 10298:2020 Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets (ISO 10298:2018)
  • OENORM EN ISO 13338:2021 Gas cylinders - Gases and gas mixtures - Determination of corrosiveness for the selection of cylinder valve outlet (ISO/DIS 13338:2021)
  • OENORM EN ISO 13338:2020 Gas cylinders - Gases and gas mixtures - Determination of tissue corrosiveness for the selection of cylinder valve outlets (ISO 13338:2017)
  • OENORM EN ISO 9300:2021 Measurement of gas flow by means of critical flow nozzles (ISO/DIS 9300:2021)

CH-SNV, Gas Flow Selection

  • SN EN ISO 10298:2021 Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets (ISO 10298:2018)
  • SN EN ISO 13338:2021 Gas cylinders - Gases and gas mixtures - Determination of tissue corrosiveness for the selection of cylinder valve outlets (ISO 13338:2017)
  • VSM 23200-1969

Military Standard of the People's Republic of China-General Armament Department, Gas Flow Selection

  • GJB 734-1989 General specification for rotary switches (circuit selectors, small current capacity)
  • GJB 734A-2002 General specifications for rotary switches (circuit selectors, small current capacity)
  • GJB 7397-2011 General specification for gas massflow sensors

CENELEC - European Committee for Electrotechnical Standardization, Gas Flow Selection

  • EN 50073:1999 Guide for Selection@ Installation@ Use and Maintenance of Apparatus for the Detection and Measurement of Combustible Gases or Oxygen

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Gas Flow Selection

  • GB/T 14669-1993 Air quality. Determination of ammonia. Ion selective electrode method
  • GB/T 32201-2015 Gas meters
  • GB/T 18604-2001 Measurement of natural gas flow by ultrasonic flow meter
  • GB/T 21391-2008 Measurement of natural gas flow by turbine meters
  • GB/T 18604-2014 Measurement of natural gas flow by gas ultrasonic flow meters
  • GB/T 18604-2023 Measuring natural gas flow with a gas ultrasonic flowmeter
  • GB/T 16895.15-2002 Electrical installations of buildings Part 5: Selection and erection of electrical equipment Section 523: Current-carrying capacities in wiring systems
  • GB/T 28848-2012 Smart Gas Flow Meter
  • GB/T 21188-2007 Measurement of gas flow by means of critical flow Venturi nozzles
  • GB/T 19029-2009 Guidelines for the selection of quality management system consultants and use of their services
  • GB/T 20728-2006 Measurement of fluid flow in closed conduits Guidance to the selection installation and use of Coriolis meters
  • GB/T 18940-2003 Measurement of gas flow in closed conduits--Turbine meters
  • GB/T 36241-2018 Vortex precession flowmeters for gas
  • GB/T 15434-1995 Ambient air--Determination of the mass concentration of fluoride--Method by filter sampling and fluorine ion- selective electrode analysis

PL-PKN, Gas Flow Selection

  • PN-EN ISO 10298-2021-03 E Gas cylinders -- Gases and gas mixtures -- Determination of toxicity for the selection of cylinder valve outlets (ISO 10298:2018)
  • PN-EN ISO 13338-2021-03 E Gas cylinders -- Gases and gas mixtures -- Determination of tissue corrosiveness for the selection of cylinder valve outlets (ISO 13338:2017)

Defense Logistics Agency, Gas Flow Selection

American Bureau of Shipping , Gas Flow Selection

  • ABS 24-1980 Guidance Manual for Material Selection and Inspection of Inert Gas Systems

CN-STDBOOK, Gas Flow Selection

American Society of Mechanical Engineers (ASME), Gas Flow Selection

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), Gas Flow Selection

  • ARI GUIDELINE W-2005 SELECTING, SIZING,& SPECIFYING PACKAGED AIR-TO-AIR ENERGY RECOVERY VENTILATION EQUIPMENT

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Gas Flow Selection

  • PREN 3717-1991 Aerospace Series Tubes Selection for Engines Fluid Systems (Issue P 1)
  • PREN 3717-1990 Aerospace Series Tubes@ Selection and Tolerances for Engines Fluid Systems (Edition 1; Supersedes C8)

国家市场监督管理总局、中国国家标准化管理委员会, Gas Flow Selection

  • GB/T 21391-2022 Measurement of natural gas flow by turbine gas meters
  • GB/T 20728-2021 Measurement of fluid flow in closed conduits—Guidance to the selection, installation and use of Coriolis flowmeters
  • GB/T 36242-2018 Volume conversion device for gas meter

RU-GOST R, Gas Flow Selection

  • GOST R 54239-2010 Solid mineral fuels. Selection of methods for the determination of trace elements
  • GOST R 54239-2018 Solid mineral fuels. Selection of methods for the determination of trace elements
  • GOST IEC 60079-29-2-2013 Explosive atmospheres. Part 29-2. Gas detectors. Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • GOST 15528-1986 Instruments for measuring flowrate, volume or mass of flowing fluid and gas. Terms and definitions
  • GOST R 52350.29.2-2010 Explosive atmospheres. Part 29-2. Gas detectors. Requirements to the selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • GOST R 8.618-2006 State system for ensuring the uniformity of measurements. State verification schedule for means measuring volume and mass flow of gas
  • GOST 8.586.5-2005 State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure

National Metrological Verification Regulations of the People's Republic of China, Gas Flow Selection

VN-TCVN, Gas Flow Selection

  • TCVN 6550-2013 Gases and gas mixtures.Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
  • TCVN 7447-5-54-2015 Low - voltage electrical installations .Part 5-54:Selection and erection of electrical equipment - Earthing arrangements and protective conductors

CEN - European Committee for Standardization, Gas Flow Selection

  • EN ISO 10156:2017 Gas cylinders - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets

International Electrotechnical Commission (IEC), Gas Flow Selection

  • IEC 60079-14:2013 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
  • IEC 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases - Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
  • IEC 60364-5-523:1983 Electrical installations of buildings. Part 5 : Selection and erection of electrical equipment. Chapter 52: Wiring systems - Section 523 - Current-carrying capacities
  • IEC 60364-5-523:1999 Electrical installations of buildings - Part 5: Selection and erection of electrical equipment - Section 523: Current-carrying capacities in wiring systems
  • IEC 60079-14:2013/ISH1:2017 Explosive Atmospheres - Part 14: Electrical installations design, selection and erection; Interpretation Sheet 1
  • IEC 60079-29-2:2015 RLV Explosive atmospheres – Part 29-2: Gas detectors – Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • IEC 62990-2:2021 Workplace atmospheres - Part 2: Gas detectors - Selection, installation, use and maintenance of detectors for toxic gases and vapours
  • IEC 60364-5-54:2021 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
  • IEC 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
  • IEC 60364-5-54:2011+AMD1:2021 CSV Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
  • IEC 60079-29-2:2015 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • IEC 60079-29-2:2007 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Gas Flow Selection

  • GB/T 34041.2-2017 Measurement of fluid flow in closed conduits—Ultrasonic meters for gas—Part 2: Meters for industrial applications
  • GB/T 34041.1-2017 Measurement of fluid flow in closed conduits—Ultrasonic meters for gas—Part 1: Meters for custody transfer and allocation measurement
  • GB/T 16895.3-2017 Low-voltage electrical installations—Part 5-54: Selection and erection of electrical equipment—Earthing arrangements and protective conductors

GM North America, Gas Flow Selection

  • GM GM6097M-2002 Selection and Use of Mild Steel Electrodes for Gas Metal Arc Welding

国家能源局, Gas Flow Selection

  • SY/T 7552-2020 Guide to Selection of Flowmeters for Natural Gas Trade Measurement
  • SY/T 6660-2021 Measuring natural gas flow with a rotary positive displacement gas flow meter

SG-SPRING SG, Gas Flow Selection

  • SS 308 Pt.0-1988 Quality Systems Part 0 : Guide To Selection And Use Of Quality Management And Quality Assurance Standards [ISO title : Quality management and quality assurance standards - Guidelines for selection and use]

ZA-SANS, Gas Flow Selection

  • SANS 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
  • SANS 430:2005 Guidelines for the selection of quality management system consultants and use of their services

Group Standards of the People's Republic of China, Gas Flow Selection

Professional Standard - Machinery, Gas Flow Selection

Chongqing Provincial Standard of the People's Republic of China, Gas Flow Selection

Professional Standard - Petroleum, Gas Flow Selection

  • SY/T 6660-2006 Measurement of natural gas flow by rotary displacement gas meters
  • SY 6660-2006 Measuring Natural Gas Flow with Rotary Positive Displacement Gas Flow Meters

American National Standards Institute （ANSI), Gas Flow Selection

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Gas Flow Selection

European Committee for Electrotechnical Standardization（CENELEC）, Gas Flow Selection

  • HD 384.5.523-1991 Electrical Installations of Buildings Part 5: Selection and Erection of Electrical Equipment Chapter 52: Wiring Systems Section 523 - Current-Carrying Capacities
  • EN IEC 62990-2:2021 Workplace atmospheres - Part 2: Gas detectors - Selection, installation, use and maintenance of detectors for toxic gases and vapours
  • EN 60079-29-2:2015 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • HD 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
  • HD 60364-5-54:2011/A1:2022 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors

CU-NC, Gas Flow Selection

  • NC 90-19-17-1987 Metrological Assurance. Low Frecuency Selective Microvoltrneters. Methods and Means of Verification

RO-ASRO, Gas Flow Selection

CZ-CSN, Gas Flow Selection

NZ-SNZ, Gas Flow Selection

  • AS/NZS 60079.29.2:2008 Explosive atmospheres Part 29.2: Gas detectors-Selection, installation, use and maintenance of detectors for flammable gases and oxygen

GOSTR, Gas Flow Selection

  • GOST ISO 11114-4-2017 Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Part 4. Test methods for selecting steels resistant to hydrogen embrittlement
  • GOST R 8.995-2020 State system for ensuring the uniformity of measurements. Volume flow rate and quantity of natural gas. Measurements procedure (method) using volumetric diaphragm and fluidics gas meters
  • GOST R ISO 10019-2007 Organization management. Guidelines for the selection of quality management system consultants and use of their services

Natural Gas Processor's Association (NGPA), Gas Flow Selection

  • GPA STD 2198-2003 Selection, Preparation, Validation, Care and Storage of Natural Gas and Natural Gas Liquids Reference Standard Blends
  • GPA STD 2198-2016 Selection@ Preparation@ Validation@ Care and Storage of Natural Gas and Natural Gas Liquids Reference Standard Blends

BE-NBN, Gas Flow Selection

Professional Standard - Electron, Gas Flow Selection

  • SJ 20834-2002 Relays,air and liquid flow,general specification for

Instrument Society of America (ISA), Gas Flow Selection

  • ISA 60079-29-2-2012 Explosive Atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen (12.13.02)

ACI - American Concrete Institute, Gas Flow Selection

  • ACI 211.1-1991 Standard Practice for Selecting Proportions for Normal@ Heavyweight@ and Mass Concrete

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Gas Flow Selection

  • IEEE 3-1982 RECOMMENDED PRACTICE IN THE SELECTION OF REFERENCE AMBIENT CONDITIONS FOR TEST MEASUREMENTS OF ELECTRICAL APPARATUS

HU-MSZT, Gas Flow Selection

API - American Petroleum Institute, Gas Flow Selection

  • API MPMS 14.12-2017 Manual of Petroleum Measurement Standards Chapter 14-Natural Gas Fluid Measurement Section 12-Measurement of Gas by Vortex Meters (FIRST EDITION)

National Metrological Technical Specifications of the People's Republic of China, Gas Flow Selection

  • JJF 1314-2011 Program of Pattern Evaluation for Gas Laminar Flow Transducers
  • JJF 1357-2012 Calibration Specification for Wet Gas Meters

工业和信息化部/国家能源局, Gas Flow Selection

US-CLSI, Gas Flow Selection

  • CLSI GP09-A2-2012 Quality Management System: Qualifying, Selecting, and Evaluating a Referral Laboratory; Approved Guideline - Second Edition

Hebei Provincial Standard of the People's Republic of China, Gas Flow Selection

  • DB13/T 5622-2022 Determination of Fluorine Content in Solid Biomass Fuel Oxygen Bomb Combustion-Ion Selective Electrode Method

  gas flow, control gas flow, gas flow control, Gas mass flow, gas flow control, Gas flow test, Standard gas flow, gas flow, Gas Detection Options, Gas flow meter, Gas Flow Quality, control gas flow, Analytical Gas Selection, gas selection, Gas flow correction, Gas Flow Selection, Measuring gas flow, Gas System Selection, Gas flow test, Time gas flow selection.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved