ZH
RU
ES

stick dilatometer

stick dilatometer, Total:500 items.

In the international standard classification, stick dilatometer involves: Mechanical testing, Protection against fire, Earthworks. Excavations. Foundation construction. Underground works, Plastics, Glass, Reinforced plastics, Construction materials, Materials for aerospace construction, Refractories, Surface treatment and coating, Testing of metals, Coals, Iron and steel products, Ferrous metals, Ceramics, Paints and varnishes, Gas and steam turbines. Steam engines, Refrigerating technology, Installations in buildings, TESTING, Thermodynamics and temperature measurements, Heat pumps, Ferroalloys, Non-ferrous metals, Mining and quarrying, Tyres, Pipeline components and pipelines, Products of non-ferrous metals, Materials for the reinforcement of composites, Road vehicle systems, Road vehicles in general, Cork and cork products, Inorganic chemicals, Seals, glands, Cellular materials, Products of the chemical industry, Welding, brazing and soldering, Equipment for the chemical industry, Analytical chemistry, Measurement of volume, mass, density, viscosity, Insulating fluids, Road engineering, Products of the textile industry, Structures of buildings.

American Society for Testing and Materials (ASTM), stick dilatometer

ASTM E228-95 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Vitreous Silica Dilatometer
ASTM D4535-85(2000) Standard Test Methods for Measurement of Thermal Expansion of Rock Using a Dilatometer
ASTM D4535-85(2004) Standard Test Methods for Measurement of Thermal Expansion of Rock Using a Dilatometer
ASTM D696-16 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between &x2212;30&xb0;C and 30&xb0;C with a Vitreous Silica Dilatometer
ASTM D4535-13 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
ASTM D4535-13e1 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
ASTM D4535-08 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
ASTM D4535-13e2 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
ASTM D4535-21 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
ASTM C372-94(2001) Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
ASTM C372-94 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
ASTM C372-94(2001)e1 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
ASTM C372-94(2007) Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
ASTM C372-94(2012) Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
ASTM E228-11 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
ASTM E228-17 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
ASTM E228-22 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
ASTM A970/A970M-16 Standard Specification for Headed Steel Bars for Concrete Reinforcement
ASTM C824-91(2000) Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method
ASTM E228-06 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
ASTM C824-91(2020) Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by Dilatometer Method
ASTM C824-91(2005) Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method
ASTM D864-52(1978) Method of Test for Coefficient of Cubical Thermal Expansion of Plastics
ASTM D696-03 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30176C and 30176C With a Vitreous Silica Dilatometer
ASTM D696-08 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30176C and 30176C With a Vitreous Silica Dilatometer
ASTM D5335-04 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gages
ASTM D5335-99 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gages
ASTM D5335-08 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges
ASTM C824-91(2010) Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method
ASTM C151-05 Standard Test Method for Autoclave Expansion of Hydraulic Cement
ASTM C151/C151M-09 Standard Test Method for Autoclave Expansion of Hydraulic Cement
ASTM D6745-22 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
ASTM C151/C151M-16 Standard Test Method for Autoclave Expansion of Hydraulic Cement
ASTM C372-94(2020) Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by Dilatometer Method
ASTM C372-94(2016) Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
ASTM C1038/C1038M-10 Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
ASTM C1038/C1038M-14 Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
ASTM D6745-06(2011) Standard Test Method for Linear Thermal Expansion of Electrode Carbons
ASTM D6745-01 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
ASTM D6745-06 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
ASTM D6745-11 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
ASTM D6745-11(2015) Standard Test Method for Linear Thermal Expansion of Electrode Carbons
ASTM C196-00(2019) Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
ASTM C151/C151M-15 Standard Test Method for Autoclave Expansion of Hydraulic Cement
ASTM C196-00(2005) Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
ASTM C196-00 Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
ASTM C196-00(2016) Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
ASTM D696-08e1 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer
ASTM C196-00(2010) Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
ASTM C1038-04 Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
ASTM C1038-95 Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
ASTM C1038-01 Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
ASTM C1038-01e1 Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
ASTM C1038/C1038M-14a Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
ASTM C1038/C1038M-14b Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
ASTM D2014-97(2004) Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
ASTM F1684-06 Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
ASTM F1684-99 Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
ASTM D2014-97 Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
ASTM D2014/D2014M-19 Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
ASTM F1684-06(2011) Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
ASTM F1684-99(2005)e1 Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
ASTM D2014/D2014M-20 Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
ASTM F1684-06(2021) Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
ASTM D2014-97(2010) Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
ASTM E831-13 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM D696-98 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30176C and 30176C With a Vitreous Silica Dilatometer
ASTM C610-17(2023) Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
ASTM C610-15 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
ASTM C610-17 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
ASTM E831-14 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E289-99 Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
ASTM F1684-06(2016) Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
ASTM C610-07 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
ASTM E831-06 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E831-05 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E831-03 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E831-00 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E831-19 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM C832-21 Standard Test Method for Measuring Thermal Expansion and Creep of Refractories Under Load
ASTM C832-00(2015) Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load
ASTM E289-17 Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
ASTM E289-04(2010) Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
ASTM C539-84(2000) Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method
ASTM C539-84(2021) Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
ASTM E289-04 Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
ASTM C832-00(2021) Standard Test Method for Measuring Thermal Expansion and Creep of Refractories Under Load
ASTM D1903-08(2017) Standard Practice for Determining the Coefficient of Thermal Expansion of Electrical Insulating Liquids of Petroleum Origin, and Askarels
ASTM C832-00 Standard Test Method of Measuring the Thermal Expansion and Creep of Refractories Under Load
ASTM C832-00(2005) Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load
ASTM C832-00(2010) Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load
ASTM D5335-14 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges
ASTM C1574-04 Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
ASTM C1574-04(2013) Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
ASTM C824-91(1996) Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method
ASTM C824-91(2015) Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method
ASTM C539-84(2006) Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
ASTM E2430/E2430M-13 Standard Specification For Expanded Polystyrene (ldquo;EPSrdquo;) Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems (ldquo;EIFSrdquo;)
ASTM E2430-05(2013) Standard Specification For Expanded Polystyrene (ldquo;EPSrdquo;) Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems (ldquo;EIFSrdquo;)
ASTM C1300-95(2020) Standard Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
ASTM C539-84(2011) Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
ASTM C1300-95(2016) Standard Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method

(U.S.) Ford Automotive Standards, stick dilatometer

FORD FLTM BV 021-1-2000 CONSTRAINED EXPANSION TEST FOR HEAT-EXPANDABLE VIBRATION DAMPING MATERIALS
FORD FLTM BV 021-01-2000 CONSTRAINED EXPANSION TEST FOR HEAT-EXPANDABLE VIBRATION DAMPING MATERIALS
FORD ESB-M18P11-A-1988 SEALER, HIGH HEAT EXPANSION, PERFORMANCE REQUIREMENTS
FORD SK-M4G9506-A-1994 SEALING STRIP, EXPANDING SPOT WELDABLE, HEAT CURING
FORD WSS-M18P19-A-2006 SEALER, HEAT EXPANDING, LOWER EXPANSION, HIGH TEMPERATURE CURE, NON WELDABLE, PERFORMANCE REQUIREMENT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESK-M4G298-A-1987 SEALER, POLYACRYLIC ESTER - EXPANDING - WELDABLE - EC-COATABLE - HEAT CURING
FORD WSK-M4G325-A1-2007 SEALER, HEAT CURING, TAPE, SPOT WELDABLE, EXPANDING ***TO BE USED WITH FORD WSS-M99P1111-A***

International Organization for Standardization (ISO), stick dilatometer

ISO/FDIS 23948:2011 Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter
ISO 23948:2011 Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter
ISO/DIS 23948 Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter
ISO 16835:2014 Refractory products - Determination of thermal expansion
ISO 7991:1987 Glass; Determination of coefficient of mean linear thermal expansion
ISO 23948:2023 Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter
ISO 10545-8:2014 Ceramic tiles - Part 8: Determination of linear thermal expansion
ISO 10545-8:1994 Ceramic tiles - Part 8: Determination of linear thermal expansion
ISO 20274:2017 Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient
ISO 17562:2001 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear thermal expansion of monolithic ceramics by push-rod technique
ISO 17562:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear thermal expansion of monolithic ceramics by push-rod technique
ISO 18099:2013 Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion
ISO 18099:2022 Thermal insulating products for building equipment and industrial installations — Determination of the coefficient of thermal expansion
ISO 2219:1989 Expanded pure agglomerated cork for thermal insulation; characteristics, sampling and packaging
ISO 2219:2010 Thermal insulation products for buildings - Factory-made products of expanded cork (ICB) - Specification
ISO 4897:1985 Cellular plastics; Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
ISO 22680:2020 Metallic and other inorganic coatings — Measurement of the linear thermal expansion coefficient of thermal barrier coatings
ISO 23766:2022 Thermal insulating products for industrial installations — Determination of the coefficient of linear thermal expansion at sub-ambient temperatures
ISO 1768:1975 Glass hydrometers; Conventional value for the thermal cubic expansion coefficient (for use in the preparation of measurement tables for liquids)
ISO 11359-2:1999 Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
ISO 11359-2:2021 Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
ISO 17139:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of thermal expansion
ISO 14420:2020 Carbonaceous products for the production of aluminium — Baked anodes and shaped carbon products — Determination of the coefficient of linear thermal expansion

Professional Standard - Aerospace, stick dilatometer

QJ 2046-1991 Heat Treatment of Expanded Alloys

IPC - Association Connecting Electronics Industries, stick dilatometer

IPC TM-650 2.4.41.1A-1997 Coefficient of Thermal Expansion by the Vitreous Silica (Quartz) Dilatometer Method
IPC TM-650 2.4.41.1-1986 Coefficient of Thermal Expansion by the Vitreous Silica (Quartz) Dilatometer Method
IPC TM-650 2.4.24C-1994 Glass Transition Temperature and Z-Axis Thermal Expansion by TMA

Korean Agency for Technology and Standards (KATS), stick dilatometer

KS L 2105-2006(2016) Measuring method of the linear thermal expansioncoefficient for low expansion glass by laser interferometry
KS L 2105-2006(2021) Measuring method of the linear thermal expansioncoefficient for low expansion glass by laser interferometry
KS L 5216-2007 Expanded or exfoliated vermiculite thermal insulating cement
KS D 4127-2014(2019) Low thermal expansive fe-alloy castings
KS F 2608-2011(2016) Measuring method of linear thermal expansion for building materials
KS D 4321-2007(2012) Low thermal expansive Fe-alloy castings
KS L ISO 7991:2012 Glass－Determination of coefficient of mean linear thermal expansion
KS L ISO 7991-2012(2017) Glass－Determination of coefficient of mean linear thermal expansion
KS F 2608-2011(2021) Measuring method of linear thermal expansion for building materials
KS L ISO 7991-2012(2022) Glass－Determination of coefficient of mean linear thermal expansion
KS M 3040-2016(2021) Test method for coefficient of cubical thermal expansion of plastics
KS L 1609-1994 Measuring method of thermal expansion of fine ceramics by thermomechanical analysis
KS M 3040-2016 Test method for coefficient of cubical thermal expansion of plastics
KS M 3706-2008(2013) Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis
KS F 2608-2022 Standard test method for measuring of linear thermal expansion for building materials
KS M ISO 2219:2004 Expanded pure agglomerated cork for thermal insulation-Characteristics, sampling and packaging
KS M ISO 2219:2014 Thermal insulation products for buildings — Factory-made products of expanded cork (ICB) — Specification
KS L 3307-2007(2012) Test method for coefficient of linear expansion and shrinkage of insulating fire bricks during heating
KS M ISO 4897:2002 Cellular plastics－Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
KS R 1098-2005 Test procedure of thermal expansion for brake linings and pads of automobiles
KS B ISO 1768:2007 Glass hydrometers－Conventional value for the thermal cubic expansion coefficient(for use in the preparation of measurement tables for liquids)
KS M ISO 4897-2002(2022) Cellular plastics－Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
KS M ISO 4897-2002(2017) Cellular plastics－Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
KS B ISO 1768-2007(2017) Glass hydrometers－Conventional value for the thermal cubic expansion coefficient(for use in the preparation of measurement tables for liquids)
KS B ISO 1768-2007(2022) Glass hydrometers－Conventional value for the thermal cubic expansion coefficient(for use in the preparation of measurement tables for liquids)
KS M ISO 11359-2:2002 Plastics－Thermomechanical analysis(TMA)－Part 2：Determination of coefficient of linear thermal expansion and glass transition temperature
KS M ISO 11359-2-2002(2017) Plastics－Thermomechanical analysis(TMA)－Part 2：Determination of coefficient of linear thermal expansion and glass transition temperature
KS M ISO 11359-2-2002(2022) Plastics－Thermomechanical analysis(TMA)－Part 2：Determination of coefficient of linear thermal expansion and glass transition temperature
KS B ISO 14661-2015(2020) Thermal turbines for industrial applications(steam turbines, gas expansion turbines) — General requirements

CZ-CSN, stick dilatometer

CSN 64 0143-1961 Solid non-ferrous material tests. Mean coefficient of thermal linear expansion
CSN 72 5127-1987 Ceramic tiles. Determination of the mean coefficient of lenear thermal expansion
CSN 72 6031-1982 Refractory materials. Method of test for linear thermal expansion
CSN 42 0440-1985 Determination of the mean linear thermal expansion coefficient of metals
CSN 36 1971-1961 Electric dilatation instantaneous thermostats for electric storage water heaters
CSN 39 5025-1993 The minimum dimensions of cartridge chambers for bag-cartridges of expansion instruments and alarm pistols
CSN 72 6029-1977 Determination of additional linear changes of expanded refractory products by heat
CSN 72 5133-1970 Determination of hydrothermal expansion o? earthenware tiles and baby squares of cement mortar in autoclaves
CSN 72 5030-1973 Testing of fired ceramic materials. Definition of the specific linear thermal expansion and mean coefficient
CSN 34 6312-1985 Testing of ceramic electrotechnic materials. Determination of the mean coefficient of the specific linear thermal expansion

RO-ASRO, stick dilatometer

STAS SR EN 103-1994 Ceramic tiles - Determination of linear thermal expansion

British Standards Institution (BSI), stick dilatometer

BS EN ISO 10545-8:1996 Ceramic tiles. Determination of linear thermal expansion
BS EN ISO 10545-8:2014 Ceramic tiles. Determination of linear thermal expansion
BS 1016 Sec.107.3:1990 Methods for analysis and testing of coal and coke. Caking and swelling properties of coal. Determination of swelling properties using a dilatometer
12/30247440 DC BS ISO 16835. Refractory products. Determination of thermal expansion
BS 2S 131:1977 Specification for high thermal expansion steel billets, bars, forgings and parts (620 MPa: limiting ruling section 150 mm)
23/30427576 DC BS ISO 23948. Plastics. Intumescence properties of PVC materials and products. Test method for the measurement of expansion with the cone calorimeter
BS EN ISO 20274:2017 Vitreous and porcelain enamels. Preparation of samples and determination of thermal expansion coefficient
BS EN ISO 17562:2021 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for linear thermal expansion of monolithic ceramics by push-rod technique
BS EN 821-1:1995 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Determination of thermal expansion
BS EN 14581:2005 Natural stone test methods - Determination of linear thermal expansion coefficient
BS EN 14581:2004 Natural stone test methods. Determination of linear thermal expansion coefficient
BS EN 14581:2004(2005) Natural stone test methods - Determination of linear thermal expansion coefficient
BS EN 13471:2001 Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion
BS ISO 18099:2013 Thermal insulating products for building equipment and industrial installations. Determination of the coefficient of thermal expansion
BS EN ISO 18099:2022 Thermal insulating products for building equipment and industrial installations. Determination of the coefficient of thermal expansion
12/30270374 DC BS EN 15501. Thermal insulation products for building equipment and industrial installations. Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products. Specification
BS ISO 22680:2020 Metallic and other inorganic coatings. Measurement of the linear thermal expansion coefficient of thermal barrier coatings
BS EN 13170:2001 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
BS EN 13170:2009 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
BS EN 1159-1:2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Determination of thermal expansion
BS EN 1159-1:2003 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1:Determination of thermal expansion
BS EN 13169:2001 Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
18/30381997 DC BS EN 15501 AMD1. Thermal insulation products for building equipment and industrial installations. Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products. Specification
BS EN 13163:2001 Thermal insulation products for buildings - Factory made products of expanded polystyrene - Specification
BS 6144:1990 Specification for expansion vessels using an internal diaphragm, for unvented hot water supply systems
BS ISO 11359-2:1999 Plastics - Thermomechanical analysis (TMA) - Determination of coefficient of linear thermal expansion and glass transition temperature
19/30364985 DC BS ISO 22680. Metallic and other inorganic coatings. Measurement of linear thermal expansion coefficient of thermal barrier coatings
BS ISO 23766:2022 Thermal insulating products for industrial installations. Determination of the coefficient of linear thermal expansion at sub-ambient temperatures
21/30420747 DC BS EN ISO 18099. Thermal insulating products for building equipment and industrial installations. Determination of the coefficient of thermal expansion
BS EN 14317-2:2007(2008) Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Specification for the installed products
BS 2HR 51:2010 Specification for high expansion heat-resisting steel billets, bars, forgings and parts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (Solution treated at 980 °C)
21/30390825 DC BS ISO 23766. Thermal insulating products for industrial installations. Determination of the coefficient of linear thermal expansion at sub-ambient temperatures
BS EN 13880-10:2003 Hot applied joint sealants - Test method for the determination of adhesion and cohesion following continuous extension and compression
BS PD CEN/TR 15985:2010 Thermal insulating products — Factory made products of expanded polystyrene (EPS) — Voluntary certification of the raw material
BS ISO 11359-2:2021 Tracked Changes. Plastics. Thermomechanical analysis (TMA). Determination of coefficient of linear thermal expansion and glass transition temperature
BS EN ISO 17139:2022 Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of thermal expansion
BS ISO 17139:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of thermal expansion
BS ISO 14428:2019 Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Expansion/shrinkage during baking
23/30450179 DC BS ISO 6334. Thermal insulation products for building equipment and industrial installations. Expanded Perlite products. Specification
BS EN 1770:1998 Products and systems for the protection and repair of concrete structures. Test methods. Determination of the coefficient of thermal expansion
BS EN 15732:2012 Light weight fill and thermal insulation products for civil engineering applications (CEA). Expanded clay lightweight aggregate products (LWA)

European Committee for Standardization (CEN), stick dilatometer

EN 103:1982 Ceramic Tiles: Determination of Linear Thermal Expansion
EN 103:1991 Ceramic Tiles - Determination of Linear Thermal Expansion
EN ISO 17562:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear thermal expansion of monolithic ceramics by push-rod technique (ISO 17562:2016)
EN ISO 10545-8:2014 Ceramic tiles - Part 8: Determination of linear thermal expansion
EN ISO 18099:2022 Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion (ISO 18099:2022)
EN 13471:2001 Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion
EN 13009:2000 Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient
prEN 821-1-1992 Advanced technical ceramics; thermo-physical properties of monolithic ceramics; part 1: determination of thermal expansion
EN 821-1:1995 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 1: Determination of thermal expansion
prEN ISO 18099:2021 Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion (ISO/DIS 18099:2021)
EN 14617-11:2005 Agglomerated stone - Test methods - Part 11: Determination of linear thermal expansion coefficient
EN ISO 10545-8:1996 Ceramic Tiles - Part 8: Determination of Linear Thermal Expansion Supersedes EN 103: 1991; ISO 10545-8: 1994
EN ISO 17139:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of thermal expansion (ISO 17139:2014)
EN 15732:2012 Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA)

Society of Automotive Engineers (SAE), stick dilatometer

SAE AMS5623C-2010 Steel Bars and Forgings, High Expansion, 9.5Ni - 5.5Mn (0.55 - 0.65C), Annealed
SAE AMS3222G-1991 Synthetic Rubber Hot Oil Resistant, High Swell 45-55
SAE AMS3229H-2011 Acrylonitrile Butadiene (NBR) Rubber, Hot Oil Resistant, Low Swell, 75-85
SAE AMS7727D-2000 Iron-Nickel-Cobalt Alloy, Bars and Forgings, 53Fe 29Ni 17Co Low Expansion, Glass Sealing
SAE AMS3222H-2008 Synthetic Rubber Hot Oil Resistant, High Swell 45-55
SAE AMS3226G-1991 Acrylonitrile Butadiene (NBR) Rubber Hot Oil and Coolant Resistant, Low Swell 45 - 55
SAE AMS3227G-1991 Acrylonitrile Butadiene (NBR) Rubber Hot Oil and Coolant Resistant, Low Swell 55 - 65
SAE AMS3226H-2014 Acrylonitrile Butadiene (Nbr) Rubber, Hot Oil and Coolant Resistant, Low Swell, 45-55
SAE AS707B-1988 Thermal Sensitive Inflation Pressure Release Devices for Tubeless Aircraft Wheels
SAE AS707C-2013 Thermal Sensitive Inflation Pressure Release Devices for Tubeless Aircraft Wheels
SAE ARP4835A-2021 Recommended Design and Test Requirements for Hydraulic Thermal Expansion Relief Valves
SAE AMS5892A-2000 Alloy, Sheet and Strip 42Fe 37.5Ni 14Co 4.8(Cb+Ta) 1.6Ti Solution Heat Treated, Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion
SAE AMS5892C-2020 Alloy, Sheet and Strip 42Fe - 37.5Ni - 14Co - 4.8Cb (Nb) - 1.6Ti Solution Heat Treated, Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion
SAE AMS5884B-2001 Iron-Nickel Alloy, Bars, Forgings, and Rings 42Fe 37.5Ni 14Co 4.8Cb 1.6Ti Solution Heat Treated, Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion
SAE AMS5884A-2000 Iron-Nickel Alloy, Bars, Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8Cb - 1.6Ti Solution Heat Treated, Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion
SAE AMS5884B-2006 Iron-Nickel Alloy, Bars, Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8Cb - 1.6Ti Solution Heat Treated, Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion
SAE AMS5893A-2000 Iron-Nickel Alloy, Bars, Forgings, and Rings 42Fe 37.5Ni 14Co 4.8(Cb+Ta) 1.6Ti Solution Heat Treated, Short-Time Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion
SAE AMS5884E-2022 Iron-Nickel Alloy, Bars, Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8Cb (Nb) - 1.6Ti Solution Heat Treated, Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion
SAE AMS3227H-2013 Acrylonitrile Butadiene (NBR) Rubber, Hot Oil and Coolant Resistant, Low Swell, 55-65
SAE AMS5884C-2009 Iron-Nickel Alloy, Bars, Forgings, and Rings 42Fe 37.5Ni 14Co 4.8Cb(Nb) 1.6Ti Solution Heat Treated, Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion
SAE AMS5884-1992 IRON-NICKEL ALLOY, BARS, FORGINGS, AND RINGS 42Fe - 37.5Ni - 14Co - 4.8(Cb + Ta) - 1.6Ti Solution Heat Treated, Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion
SAE AMS5940A-2005 Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 34Co 3.0Cr 28Ni 3.0Cb 5.5Al 0.008B 25.5Fe Multiple Melted, High Temperature, Oxidation Resistant, Low Expansion Solution Heat Treated, Precipication Hardenable
SAE AMS5940B-2007 Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 34Co 3.0Cr 28Ni 3.0Cb(Nb) 5.5Al 0.008B 25.5Fe Multiple Melted, High Temperature, Oxidation Resistant, Low Expansion Solution Heat Treated, Precipication Hardenable
SAE AMS5940C-2008 Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 34Co 3.0Cr 28Ni 3.0Cb(Nb) 5.5Al 0.008B 25.5Fe Multiple Melted, High Temperature, Oxidation Resistant, Low Expansion Solution Heat Treated, Precipication Hardenable
SAE AMS5940D-2014 Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 34Co - 3.0Cr - 28Ni - 3.0Cb(Nb) - 5.5Al - 0.008B - 25.5Fe Multiple Melted, High Temperature, Oxidation-Resistant, Low Expansion Solution Heat Treated, Precipitation-Hardenable
SAE AMS5940D-2019 Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 34Co - 3.0Cr - 28Ni - 3.0Cb(Nb) - 5.5Al - 0.008B - 25.5Fe Multiple Melted, High Temperature, Oxidation-Resistant, Low Expansion Solution Heat Treated, Precipitation-Hardenable
SAE AMS5893B-2012 Iron-Nickel Alloy, Bars, Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8 (Cb + Ta)(Nb + Ta) - 1.6Ti Solution Heat Treated, Short-Time Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion
SAE AMS5940-1996 Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 34Co - 3.0Cr - 28Ni - 30Cb - 5.5Al - 0.008B - 25.5Fe Multiple Melted, High Temperature, Oxidation Resistant, Low Expansion Solution Heat Treated, Precipitation Hardenable, Specification U
SAE AMS5802C-2006 Iron-Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 41Fe - 37.5Ni - 14Co - 4.8Cb (Nb) - 1.5Ti Vacuum Melted, Low Expansion UNS N19907

国家市场监督管理总局、中国国家标准化管理委员会, stick dilatometer

GB/T 37991-2019 Measuring method for ultra-thin glass reheating line shrinkage—Dilatometer method
GB/T 9966.16-2021 Test methods for natural stone—Part 16: Determination of linear thermal expansion coefficient
GB/T 7991.7-2019 Test method of viterous and porcelain enamels—Part 7：Determination of coefficient of mean lincar thermal expansion
GB/T 36800.2-2018 Plastics—Thermomechanical analysis(TMA)—Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature

American Industrial Hygiene Association （AIHA), stick dilatometer

ASSE 1046-1990 Performance Requirements for Thermal Expansion Relief Valve

RU-GOST R, stick dilatometer

GOST R 57708-2017 Polymer composites. Method for determination of linear thermal expansion with a push-rod dilatometer
GOST R 54253-2010 Carbon materials. Test method for linear thermal expansion coefficient
GOST 34708-2021 Pipeline valves. Sealing materials based on thermally expanded graphite. General specifications
GOST R 57754-2017 Polymer composites. Test method for determination of linear thermal expansion by thermomechanical analysis
GOST R 56148-2014 Thermal insulating products of expanded polystyrene (EPS) for building applications. Specifications
GOST EN 13471-2011 Thermal insulating products for engineering equipment of buildings and industrial installations. Method for determination of the coefficient of thermal expansion
GOST R 57578-2017 Polymer composites. Method for determination of linear thermal expansion with a interferometry
GOST R ISO 14428-2016 Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Expansion/shrinkage during baking
GOST 28947-1991 Glass Hydrometers. Conventional value for tne thermal cubic expasion coefficient (for use in tne preparation of measurement table for liquids)
GOST 32618.2-2014 Plastics. Thermomechanical analysis (TMA). Part 2. Determination of coefficient of linear thermal expansion and glass transition temperature
GOST R ISO 14420-2014 Carbonaceous materials used in the production of aluminium. Prebaked anodes and shaped carbon products. Determination of the coefficient of linear thermal expansion

European Association of Aerospace Industries, stick dilatometer

AECMA PREN 4438-1997 Aerospace Series Metallic Materials Test Methods Linear Thermal Expansion of Solid Materials with a Vitreous Silica Dilatometer Edition P 1

Professional Standard - Coal, stick dilatometer

MT/T 229-2005 General specifications of instrument for the determination of the crucible swelling number of bituminous coal-electrical heating

Japanese Industrial Standards Committee (JISC), stick dilatometer

JIS H 8455:2022 Measurement of the linear thermal expansion coefficient of thermal barrier coatings
JIS R 3251:1995 Measuring method of the linear thermal expansion coefficient for low expansion glass by laser interferometry
JIS R 2207-3:2007 Test methods for thermal expansion of refractory products -- Part 3: Contact method using rod test piece
JIS R 1618:1994 Measuring method of thermal expansion of fine ceramics by thermomechanical analysis
JIS A 1325:1995 Measuring method of linear thermal expansion for building materials
JIS R 1618:2002 Measuring method of thermal expansion of fine ceramics by thermomechanical analysis
JIS H 8455:2010 Testing method for coefficient of linear expansion of thermal barrier coatings
JIS B 8619:1999 Thermostatic refrigerant expansion valves -- Methods of testing for performance
JIS R 2617:1985 Testing method for thermal expansion and shrinkage of insulating fire bricks
JIS R 3102:1995 Testing method for average linear thermal expansion of glass
JIS Z 2285:2003 Measuring method of coefficient of linear thermal expansion of metallic materials
JIS H 7404:1993 Test method for linear thermal expansion coefficient of fiber reinforced metals
JIS D 4416:1998 Automotive parts -- Disk brake pads -- Test procedure of thermal expansion
JIS D 4416:1996 Test procedure of thermal expansion for brake linings and pads of automobiles
JIS K 7197:1991 Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis
JIS R 2207-1:2007 Test methods for thermal expansion of refractory products -- Part 1: Non-contact method
JIS K 7197 AMD 1:2012 Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis (Amendment 1)
JIS R 2207-2:2007 Test methods for thermal expansion rate of refractory products -- Part 2: Contact method using cylinder test piece

TR-TSE, stick dilatometer

TS 1065-1972 COEFFICIENT OF LINEAR THERMAL EXPANSION OF PLASTICS

Association Francaise de Normalisation, stick dilatometer

NF B40-308:1986 Refractories - Determination of thermal expansion at elevated temperatures
NF P50-765*NF EN 13009:2000 Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient
NF EN ISO 10545-8:2014 Carreaux et dalles céramiques - Partie 8 : détermination de la dilatation linéique d'origine thermique
NF EN ISO 20274:2017 Emaux vitrifiés - Préparation d'échantillons d'émail et détermination du coefficient de dilatation thermique
NF EN ISO 17139:2022 Céramiques techniques - Propriétés thermophysiques des composites céramiques - Détermination de la dilatation thermique
NF A91-317*NF EN ISO 20274:2017 Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient
NF EN 14581:2005 Méthodes d'essai pour pierres naturelles - Détermination du coefficient linéaire de dilatation thermique
NF B10-639*NF EN 14581:2005 Natural stone test method - Determination of linear thermal expansion coefficient
NF A51-121:1988 COPPER SEMI-FINISHED PRODUCTS. SHEATHED ROUND COPPER TUBES.
NF P75-455*NF EN 15501:2016 Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification
NF EN 15501:2016 Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Produits manufacturés en perlite expansée (EP) et à base de vermiculite exfoliée (EV) - Spécification
NF EN ISO 18099:2022 Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Détermination du coefficient de dilatation thermique
NF EN 13009:2000 Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination du coefficient d'expansion hydrique
NF EN 13170/IN1:2015 Produits isolants thermiques pour le bâtiment - Produits manufacturés en liège expansé (ICB) - Spécification
NF EN 13170+A1:2015 Produits isolants thermiques pour le bâtiment - Produits manufacturés en liège expansé (ICB) - Spécification
NF P75-410:2009 Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification.
NF P75-414:2009 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification.
NF P75-414:2013 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
NF P75-414/IN1*NF EN 13170/IN1:2015 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
NF P75-414*NF EN 13170+A1:2015 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
NF EN ISO 17562:2021 Céramiques techniques - Détermination du coefficient de dilatation thermique linéique des céramiques monolithiques par la méthode de la tige poussoir
NF EN 14617-11:2005 Pierre agglomérée - Méthodes d'essai - Partie 11 : détermination du coefficient linéaire de dilatation thermique
NF B10-602-11*NF EN 14617-11:2005 Agglomerated stone - Test methods - Part 11 : determination of linear thermal expansion coefficient.
NF EN 993-19:2004 Méthodes d'essai des produits réfractaires denses façonnés - Partie 19 : détermination de la dilatation thermique
NF P84-705:2019 Géosynthétiques bentonitiques - Détermination à l'oedoperméamètre des caractéristiques de gonflement, flux, perméabilité des géosynthétiques bentonitiques (GSB) - Essais de caractérisation et essai de performance
NF B43-207:2003 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1 : determination of thermal expansion.
NF P75-425*NF EN 13499:2004 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification
NF P75-404:2009 Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification.
NF P75-404:2013 Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) products - Specification
NF P75-404/IN1:2015 Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) products - Specification
NF P75-404:2015 Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) products - Specification
NF B43-207*NF EN ISO 17139:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of thermal expansion
NF P84-705:2008 Geosynthetic barriers - Determination of the swelling, flow and permeability characteristics of geosysnthetic clay liners (GCL) using an oedopermeameter - Characterisation test and performance test.
NF P75-459*NF EN 15732:2013 Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA)

Danish Standards Foundation, stick dilatometer

DS/EN 103:1992 Ceramic tiles. Determination of linear thermal expansion
DS/EN ISO 10545-8:1997 Ceramic tiles - Part 8: Determination of linear thermal expansion
DS/EN 14581:2005 Natural stone test methods - Determination of linear thermal expansion coefficient
DS/EN 15501:2013 Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification
DS/EN 13471:2001 Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion
DS/EN 13009:2000 Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient
DS/EN 13170:2013 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
DS/EN 821-1:1996 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 1: Determination of thermal expansion
DS/EN 14617-11:2005 Agglomerated stone - Test methods - Part 11: Determination of linear thermal expansion coefficient
DS/ENV 1159-1:1993 Advanced technical ceramics. Ceramic composites. Thermophysical properties. Part 1: Determination of thermal expansion
DS/EN 1159-1:2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion
DS/EN 13169:2013 Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification
DS/EN 993-19:2004 Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method

ZA-SANS, stick dilatometer

SANS 5934:1979 Crucible swelling number of coal (electrical-heating method)
SANS 5933:1978 Crucible swelling number of coal (gas-heating method)
SANS 5916:1980 Thermal expansion of refractory materials (dial gauge method for temparatures up to 1 150 鳦)
SANS 5917:1980 Thermal expansion of refractory materials (electrical method for temperatures between 1 150 鳦 and 1 500 鳦)
SANS 5918:1980 Thermal expansion of refractory materials (optical method for temperatures between 1 150 鳦 and 1 500 鳦)

IN-BIS, stick dilatometer

IS 3410-1993 Metallic materials - determination of linear thermal expansion
IS 5623-1970
IS 11239 Pt.7-1985

AENOR, stick dilatometer

UNE 53126:2014 Plastics. Determination of coefficient of linear thermal expansion
UNE 103601:1996 TEST FOR FREE SWELLING OF SOILS IN OEDOMETER DEVICE.
UNE 400308:1997 GLASS. DETERMINATION OF COEFFICIENT OF MEAN LINEAR THERMAL EXPANSION.
UNE 103602:1996 TEST METHOD FOR ONE-DIMENSIONAL SWELL PRESSURE OF A SOIL IN CONSOLIDOMETER.
UNE-EN ISO 10545-8:2014 Ceramic tiles - Part 8: Determination of linear thermal expansion (ISO 10545-8:2014)
UNE-EN 13009:2001 Hygrothermal performance of building materials and products. Determination of hygric expansion coefficient.
UNE-EN 13471:2002 Thermal insulating products for building equipment and industrial installations. Determination of the coefficient of thermal expansion.
UNE 32320:1995 EXPANSION OR CONTRACTION OF COAL BY THE SOLE-HEATED OVEN. STANDARD TEST METHOD WITH DOUBLE-CHAMBER OVEN.
UNE-EN 14617-11:2006 Agglomerated stone - Test methods - Part 11: Determination of linear thermal expansion coefficient
UNE 83969:2017 EX Concrete durability. Evaluation of the expansion of mortar bars using potential reactive binders and aggregates against alkali-silica and alkali-silicate . Accelerated method of mortar bars.
UNE-EN 993-19:2004 Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method

Professional Standard - Pharmaceutical Packaging, stick dilatometer

YB B0021(03)-2003 Determination of linear thermal expansion coefficient (trial)
YBB 0020(03)-2003 Determination method of average linear thermal expansion coefficient (Trial)

未注明发布机构, stick dilatometer

BS 2S 131:1977(2009) Specification for High thermal expansion steel billets, bars, forgings and parts — (620 MPa : limiting ruling section 150 mm)
DIN EN 13170:2001 Thermal insulation products for buildings — Factory made products of expanded cork (ICB) — Specification
BS EN 821-1:1995(1999) Advanced technical ceramics — Monolithic ceramics — Thermo - physical properties — Part 1 : Determination of thermal expansion
DIN EN 13169-A1:2004 Thermal insulation materials for buildings – Factory manufactured expanded perlite (EPB) products – Specification
BS EN 1159-1:2003(2004) Advanced technical ceramics — Ceramic composites — Thermophysical properties — Part 1 : Determination of thermal expansion
BS 6144:1990(1999) Specification for Expansion vessels using an internal diaphragm, for unvented hot water supply systems
BS EN 2155-12:1997(2000) Test methods for transparent materials for aircraft glazing — Part 12 : Determination oflinear thermal expansion
DIN EN ISO 17139:2022 High-performance ceramics – Thermophysical properties of ceramic composites – Determination of thermal expansion (ISO 17139:2014); German version EN ISO 17139:2022

(U.S.) Plastic Pipe Association, stick dilatometer

PPI TR-21-2001 Thermal Expansion and Contraction in Plastics Piping Systems

YU-JUS, stick dilatometer

JUS B.D8.330-1981 Refractories. Determination linear termal akmgation coefficient
JUS B.E8.310-1989 Glass. Determinaticm of coefficient of tean linear ternal expansion
JUS B.D8.052-1983 Ceramic tiles. Determination of coefficient linear thermal expanding for tiles ofspecial purposes

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, stick dilatometer

GB/T 16920-2015 Determination of average linear thermal expansion coefficient of glass
GB/T 16920-1997 Glass--Determination of coefficient of mean linear thermal expansion
GB/T 4339-1999 Testing method for thermal expansion characteristic parameters of metallic materials
GB/T 4339-2008 Test methods for thermal expansion characteristic parameters of metallic materials
GB/T 28194-2011 Glass.Double liner method for determination thermal coefficient expansion
GB/T 5448-2014 Determination of the crucible swelling number of bituminous coal.Electrical heating method
GB/T 5448-1997 Determination of the crucible swelling number of bituminous coal--Electrical heating
GB/T 25144-2010 Method for determination of average linear thermal expansion coefficient of glass-lined glaze
GB/T 3810.8-2016 Test methods of ceramic tiles.Part 8:Determination of linear thermal expansion
GB/T 3810.8-1999 Test methods of ceramic tiles-- Part 8: Determination of linear thermal expansion
GB/T 3810.8-2006 Test methods of ceramic tiles - Part 8: Determination of linear thermal expansion
GB 9966.16-2021 Test methods for natural stone Part 16: Determination of coefficient of linear thermal expansion

Standard Association of Australia （SAA）, stick dilatometer

AS ISO 10545.8:2020 Ceramic tiles, Method 8: Determination of linear thermal expansion
AS 1774.11:2005 Refractories and refractory materials - Physical test methods - Determination of thermal expansion
AS 4459.8:1997 Methods of sampling and testing ceramic tiles - Determination of linear thermal expansion
AS 1774.11:2015 Refractories and refractory materials — Physical test methods, Method 11: Determination of thermal expansion

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, stick dilatometer

PREN 4438-1997 Aerospace Series Metallic Materials Test Methods Linear Thermal Expansion of Solid Materials with a Vitreous Silica Dilatometer (Edition P 1)

TH-TISI, stick dilatometer

TIS 2398.8-2008 Ceramic tiles.part 8: determination of linear thermal expansion
TIS 15.11-1978 Standard for portland cement.part 11: standard method ok test for autoclave expansion oe portland cement

BE-NBN, stick dilatometer

NBN-EN 155-1992 Ceramic tiles - Determination of moisture expansion using boiling water - Unglazed tiles
NBN-ISO 2219:1992 Expanded pure agglomerated cork for thermal insulation. Characteristics, sampling and packaging

German Institute for Standardization, stick dilatometer

DIN 53752:1980 Testing of plastics; determination of the coefficient of linear thermal expansion
DIN ISO 7991:1998 Glass - Determination of coefficient of mean linear thermal expansion (ISO 7991:1987)
DIN EN ISO 10545-8:2014-09 Ceramic tiles - Part 8: Determination of linear thermal expansion (ISO 10545-8:2014); German version EN ISO 10545-8:2014
DIN 4809-2:1986 Compensators made of elastomeric compound materials (rubber-compensators) for warmwater-heating-plants; constructional and connecting sizes
DIN 51045-3:2009-04 Determination of linear thermal expansion of solids - Part 3: Testing of non-fired fine ceramic materials using the dilatometer method
DIN 51045-2:2009-04 Determination of linear thermal expansion of solids - Part 2: Testing of fired fine ceramic materials using the dilatometer method
DIN 51045-1:2005 Determination of the thermal expansion of solids - Part 1: Basic rules
DIN 51045-1:2005-08 Determination of the thermal expansion of solids - Part 1: Basic rules
DIN 51045-2:2009 Determination of linear thermal expansion of solids - Part 2: Testing of fired fine ceramic materials using the dilatometer method
DIN 51045-3:2009 Determination of linear thermal expansion of solids - Part 3: Testing of non-fired fine ceramic materials using the dilatometer method
DIN ISO 7991:1998-02 Glass - Determination of coefficient of mean linear thermal expansion (ISO 7991:1987)
DIN EN 14581:2005 Natural stone test methods - Determination of linear thermal expansion coefficient; German version EN 14581:2004
DIN EN 14581:2005-03 Natural stone test methods - Determination of linear thermal expansion coefficient; German version EN 14581:2004
DIN EN 15501:2016-03 Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification; German version EN 15501:2015 / Note: To be amended by DIN EN 15501/A1 (2018-12).
DIN 51909:1998 Testing of carbon materials - Determination of coefficient of linear thermal expansion - Solid materials
DIN 51909:2009-05 Testing of carbonaceous materials - Determination of coefficient of linear thermal expansion - Solid materials
DIN EN 13009:2000-04 Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient; German version EN 13009:2000
DIN EN ISO 20274:2017 Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient (ISO 20274:2017)
DIN EN 13170/A2:2018 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification; German and English version EN 13170:2012+A1:2015/prA2:2018
DIN EN 13170:2015-04 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification; German version EN 13170:2012+A1:2015 / Note: To be amended by DIN EN 13170/A2 (2018-09).
DIN EN 14617-11:2005-06 Agglomerated stone - Test methods - Part 11: Determination of linear thermal expansion coefficient; German version EN 14617-11:2005
DIN EN ISO 18099:2023 Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion (ISO 18099:2022)
DIN EN ISO 18099:2023-03 Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion (ISO 18099:2022); German version EN ISO 18099:2022
DIN EN 1159-1:2007 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion (includes Corrigendum AC:2007); English version of DIN EN 1159-1:2007
DIN EN 13169/A2:2018 Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification; German and English version EN 13169:2012+A1:2015/prA2:2018
DIN EN 13169:2015-04 Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification; German version EN 13169:2012+A1:2015 / Note: To be amended by DIN EN 13169/A2 (2018-09).
DIN EN 15600-1:2010-12 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation; German version...
DIN EN 821-1:1995 Advanced technical ceramics - Monolithic ceramics - Thermophysical properties - Part 1: Determination of thermal expansion; German version EN 821-1:1995

Institute of Interconnecting and Packaging Electronic Circuits (IPC), stick dilatometer

IPC TM-650 2.4.41-1986 Coefficient of Linear Thermal Expansion of Electrical Insulating Materials
IPC TM-650 2.4.41.1-1997 Coefficient of Thermal Expansion by the Vitreous Silica (Quartz) Dilatometer Method Revision A
IPC TM-650 2.4.41.4-1995 Volumetric Thermal Expansion Polymer Coatings on Inorganic Substrates
IPC TM-650 2.4.24-1994 Glass Transition Temperature and Z-Axis Thermal Expansion by TMA; Revision C - December 1994

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., stick dilatometer

ASHRAE 194-2012 Method of Test for Direct-Expansion Ground-Source Heat Pumps
ASHRAE 194-2017 Method of Test for Direct-Expansion Ground-Source Heat Pumps

HU-MSZT, stick dilatometer

MSZ 11683-1970

ES-AENOR, stick dilatometer

UNE 67-103-1985

PT-IPQ, stick dilatometer

GM Global, stick dilatometer

GMW 16973-2013 Coefficient of Linear Thermal Expansion (CLTE) for Elastomers Issue 1; English

CEN - European Committee for Standardization, stick dilatometer

EN ISO 20274:2017 Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient
EN 14581:2004 Natural stone test methods - Determination of linear thermal expansion coefficient
EN 15501:2015 Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification
EN 15501:2015/PRA1:2018 Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification
EN 15501:2013 Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification

Professional Standard - Machinery, stick dilatometer

JB/T 6819.6-1993 Instrument material terminology - Expansion alloy, thermal bimetal, electrical vacuum material and sealing material

Professional Standard - Electron, stick dilatometer

SJ/T 11036-1996 Test method for average linear thermal expansion coefficient of electronic glass

Malaysia Standards, stick dilatometer

MS 1466-1999 Method of test for linear thermal expansion of solid materials by thermomechanical analysis

AT-ON, stick dilatometer

ONORM M 7757-1995 Special requirements for heat pump-systems for direct expansion, ground coupled
ONORM M 7755-3-2000 Electrically driven heat pumps - Special requirements for heat pump-systems for direct expansion, ground coupled
ONORM ENV 1159-1-1993 Advanced technical ceramics - Ceramic composites -Thermophysical properties - Part 1: Determination of thermal expansion
ONORM B 6110-1998 External thermal insulating composite Systems (ETICS) with rendering based on expanded polystyrene foam EPS-F - Marking of conformity

American Gear Manufacturers Association, stick dilatometer

AGMA 91FTM14-1991 The Effect of Thermal Shrink and Expansion on Plastic Gear Geometry

Lithuanian Standards Office , stick dilatometer

LST EN ISO 10545-8:1998 Ceramic tiles - Part 8: Determination of linear thermal expansion (ISO 10545-8:1994)
LST EN 14581-2005 Natural stone test methods - Determination of linear thermal expansion coefficient
LST EN 13471-2002 Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion
LST EN 13009-2000 Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient
LST EN 13170-2013 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
LST EN 821-1-2002 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 1: Determination of thermal expansion
LST EN 14617-11-2005 Agglomerated stone - Test methods - Part 11: Determination of linear thermal expansion coefficient
LST EN 1159-1-2003 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion
LST EN 1159-1-2003/AC-2007 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion
LST EN 13169-2013 Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification
LST EN 993-19-2004 Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method

AGMA - American Gear Manufacturers Association, stick dilatometer

91FTM14-1991 The Effect of Thermal Shrink and Expansion on Plastic Gear Geometry

ES-UNE, stick dilatometer

UNE-EN 14581:2006 Natural stone test methods - Determination of linear thermal expansion coefficient
UNE-EN 15501:2017 Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification
UNE-EN 13170:2013+A1:2015 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
UNE-EN ISO 18099:2023 Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion (ISO 18099:2022)
UNE-EN 13169:2013+A1:2015 Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification
UNE-EN 15600-1:2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation (Endorsed by AE...
UNE-EN 15599-1:2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation (Endorsed by AENOR in...
UNE 43312:1982 ERRATUM:2011 Glass hydrometers. Conventional value for the thermal cubic-expansion coefficient (for use in the preparation of measurement tables for liquids)
UNE-EN ISO 17139:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of thermal expansion (ISO 17139:2014) (Endorsed by Asociación Española de Normalización in May of 2022.)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, stick dilatometer

GB/T 34183-2017 Thermal insulating products for building equipment and industrial installations—Determination of the coefficient of thermal expansion

Aerospace, Security and Defence Industries Association of Europe (ASD), stick dilatometer

ASD-STAN PREN 4438-1997 Aerospace Series Metallic Materials Test Methods Linear Thermal Expansion of Solid Materials with a Vitreous Silica Dilatometer (Edition P 1)

The American Road & Transportation Builders Association, stick dilatometer

AASHTO TP 60-2000 Standard Method of Test for Coefficient of Thermal Expansion of Hydraulic Cement Concrete
AASHTO T 336-2015 Standard Method of Test for Coefficient of Thermal Expansion of Hydraulic Cement Concrete
AASHTO TP60-2000 Standard Test Method for the Coefficient of Thermal Expansion of Hydraulic Cement Concrete 2000 Edition
AASHTO T303-2000 Standard Method of Test for Accelerated Detection of Potentially Deleterious Expansion of Mortar Bars Due to Alkali-Silica Reaction Twentieth Edition

PL-PKN, stick dilatometer

PN C82055-13-1990 Test methods of pres&ed carbon products Determination of coefficient of linear thermal expansion

Group Standards of the People's Republic of China, stick dilatometer

T/CSTM 00440-2023 Test method for determining thermal expansion coefficient and residual stress of CVD ceramic coatings

AASHTO - American Association of State Highway and Transportation Officials, stick dilatometer

T 336-2011 Standard Method of Test for Coefficient of Thermal Expansion of Hydraulic Cement Concrete
TP 60-2000 Standard Method of Test for Coefficient of Thermal Expansion of Hydraulic Cement Concrete
T 336-2010 Standard Method of Test for Coefficient of Thermal Expansion of Hydraulic Cement Concrete
T 336-2015 Standard Method of Test for Coefficient of Thermal Expansion of Hydraulic Cement Concrete
T 336-2009 Standard Method of Test for Coefficient of Thermal Expansion of Hydraulic Cement Concrete
T303-2000 Standard Method of Test for Accelerated Detection of Potentially Deleterious Expansion of Mortar Bars Due to Alkali-Silica Reaction (Twentieth Edition)
T303-1996 Standard Method of Test for Accelerated Detection of Potentially Deleterious Expansion of Mortar Bars Due to Alkali-Silica Reaction (Eighteenth Edition)

FI-SFS, stick dilatometer

SFS 5405-1987

North Atlantic Treaty Organization Standards Agency, stick dilatometer

STANAG 4525-2001 EXPLOSIVES, PHYSICAL/MECHANICAL PROPERTIES, THERMOMECHANICAL ANALYSIS FOR DETERMINING THE COEFFICIENT OF LINEAR THERMAL EXPANSION (TMA)

Professional Standard - Non-ferrous Metal, stick dilatometer

YS/T 63.4-2006 Carbonaceous materials used in the production of aluminium-Part 4:Determination of the thermal expansion coefficient
YS/T 63.4-2023 Carbonaceous materials used for the production of aluminium — Part 4:Determination of the thermal expansion coefficient

SAE - SAE International, stick dilatometer

SAE AMS5884A-1994 Iron-Nickel Alloy@ Bars@ Forgings@ and Rings 42Fe - 37.5Ni - 14Co - 4.8Cb - 1.6Ti Solution Heat Treated@ Precipitation Hardenable Multiple Melted@ High Temperature@ Low Expansion (UNS N19909)
SAE AMS5884D-2016 Iron-Nickel Alloy@ Bars@ Forgings@ and Rings 42Fe - 37.5Ni - 14Co - 4.8Cb(Nb) - 1.6Ti Solution Heat Treated@ Precipitation Hardenable Multiple Melted@ High Temperature@ Low Expansion (UNS N19909)
SAE AMS5893-1992 Iron-Nickel Alloy@ Bars@ Forgings@ and Rings 42Fe - 37.5Ni - 14Co - 4.8(Cb + Ta) - 1.6Ti Solution Heat Treated@ Short-Time Precipitation Hardenable Multiple Melted@ High Temperature@ Low Expansion
SAE AMS5893C-2018 Iron-Nickel Alloy@ Bars@ Forgings@ and Rings 42Fe - 37.5Ni - 14Co - 4.8 (Cb + Ta)(Nb + Ta) - 1.6Ti Solution Heat Treated@ Short-Time Precipitation Hardenable Multiple Melted@ High Temperature@ Low Expansion (UNS N19909)

Association of German Mechanical Engineers, stick dilatometer

DVS 2201-1 Beiblatt 3-2004 Testing of semi-finished products made of thermoplastics - Basics - Indications - Linear thermal expansion coefficients
DVS 2201-1 Beiblatt 3-2003 Testing of semifinished products made of thermoplastics - Basics - Indications; Linear thermal expansion coefficients

CO-ICONTEC, stick dilatometer

ICONTEC 3219-1991

VN-TCVN, stick dilatometer

TCVN 6415-8-2005 Ceramic floor and wall tiles.Test methods.Part 8: Determination of linear thermal expansion

ESDU - Engineering Sciences Data Unit, stick dilatometer

AERO 00.03.31-1965 Solutions to the Prandtl-Meyer expansion relations for a range of specific heat ratios: pressure coefficient and maximum flow deflection angle.

American Petroleum Institute (API), stick dilatometer

API TR 981-2021 Thermal Expansion Under Load and Creep of Refractories—An Evaluation and Comparison of Testing Methods (FIRST EDITION)