ZH
RU
ES

Measure the temperature inside an object

Measure the temperature inside an object, Total:500 items.

In the international standard classification, Measure the temperature inside an object involves: Materials for aerospace construction, Equipment for petroleum and natural gas industries, Thermodynamics and temperature measurements, Nuclear energy engineering, Natural gas, Footwear, Testing of metals, Internal combustion engines, Rotary-reciprocating mechanisms and their parts, Conducting materials, Solar energy engineering, Semiconductor devices, Measurement of fluid flow, Electricity. Magnetism. Electrical and magnetic measurements, Diagnostic, maintenance and test equipment, Plastics, Items of art and handicrafts, Cereals, pulses and derived products, Air quality, Vocabularies, Soil quality. Pedology, Burners. Boilers, Fuels, Geology. Meteorology. Hydrology, Linear and angular measurements, Coals, Road engineering, Laboratory medicine, Protection against dangerous goods, Paints and varnishes, Raw materials for rubber and plastics, Pipeline components and pipelines, Lubricants, industrial oils and related products, Metrology and measurement in general, Hydraulic fluids, Construction materials, Medical equipment, Fibre optic communications, Lamps and related equipment, Installations in buildings, Small craft, Non-textile floor coverings, Road vehicles in general, Optics and optical measurements, Protection of and in buildings, Road vehicle systems, Elements of buildings, Safety of machinery, Structures of buildings, Petroleum products in general, Paper and board, Insulating materials, Farming and forestry, Environmental protection, Water quality, Products of the chemical industry, Ergonomics, Milk and milk products, Occupational safety. Industrial hygiene, Measurement of volume, mass, density, viscosity, Environmental testing, Electrical engineering in general, Ceramics.

American Society for Testing and Materials (ASTM), Measure the temperature inside an object

• ASTM E377-96(2002) Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
• ASTM E377-96 Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
• ASTM E377-08(2015) Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
• ASTM E377-08(2020) Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
• ASTM E1921-12 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
• ASTM E1921-13 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
• ASTM E377-08 Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
• ASTM E1299-96(2002) Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
• ASTM E344-12 Terminology Relating to Thermometry and Hydrometry
• ASTM E1299-96(2010) Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
• ASTM E825-98 Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
• ASTM E825-98(2003) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
• ASTM E825-98(2009) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
• ASTM D1142-95 Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
• ASTM E1921-97 Standard Test Method for Determination of Reference Temperature, T_o, for Ferritic Steels in the Transition Range
• ASTM E1921-02 Standard Test Method for Determination of Reference Temperature, T_o, for Ferritic Steels in the Transition Range
• ASTM E1921-08 Standard Test Method for Determination of Reference Temperature, T_o, for Ferritic Steels in the Transition Range
• ASTM E1921-07 Standard Test Method for Determination of Reference Temperature, T_o, for Ferritic Steels in the Transition Range
• ASTM E1921-08a Standard Test Method for Determination of Reference Temperature, T_o, for Ferritic Steels in the Transition Range
• ASTM E1921-08ae1 Standard Test Method for Determination of Reference Temperature, T_o, for Ferritic Steels in the Transition Range
• ASTM E1921-09 Standard Test Method for Determination of Reference Temperature, T_o, for Ferritic Steels in the Transition Range
• ASTM E1921-09b Standard Test Method for Determination of Reference Temperature, T_o, for Ferritic Steels in the Transition Range
• ASTM E1921-09ce1 Standard Test Method for Determination of Reference Temperature, T_o, for Ferritic Steels in the Transition Range
• ASTM E1921-09ce2 Standard Test Method for Determination of Reference Temperature, T_o, for Ferritic Steels in the Transition Range
• ASTM E1921-10 Standard Test Method for Determination of Reference Temperature, T_o, for Ferritic Steels in the Transition Range
• ASTM E1921-21 Standard Test Method for Determination of Reference Temperature,
• ASTM E1921-16 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
• ASTM E1921-12a Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
• ASTM E1921-05 Standard Test Method for Determination of Reference Temperature, T_o'', for Ferritic Steels in the Transition Range
• ASTM E1921-03 Standard Test Method for Determination of Reference Temperature, T_o'', for Ferritic Steels in the Transition Range
• ASTM E1921-14 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
• ASTM E1921-14a Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
• ASTM E1921-15a Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
• ASTM E1921-15ae1 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
• ASTM E1921-13a Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
• ASTM F689-97 Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings
• ASTM F689-97(2004) Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings
• ASTM E1921-11a Standard Test Method for Determination of Reference Temperature, T_o, for Ferritic Steels in the Transition Range
• ASTM C1046-95(2001) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
• ASTM C1046-95(2007) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
• ASTM C1046-95(2013) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
• ASTM D1142-95(2000) Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
• ASTM D1142-95(2021) Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
• ASTM C1046-95 Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
• ASTM D1142-95(2006) Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
• ASTM D7867-13(2020) Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature
• ASTM D1142-95(2012) Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
• ASTM D3418-03 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
• ASTM D3418-08 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
• ASTM C559-16(2020) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
• ASTM E1921-22a Standard Test Method for Determination of Reference Temperature, T0, for Ferritic Steels in the Transition Range

German Institute for Standardization, Measure the temperature inside an object

• DIN EN 13485:2022-08 Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability; German and English version prEN 13485:2022 / Note: Date of issue 2022-07-15*Int...
• DIN EN 13486:2022-08 Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Periodic verification; German and English version prEN 13486:2022 / Note: Date of issu...
• DIN ISO 2115:2001-04 Plastics - Polymer dispersions - Determination of white point temperature and minimum film-forming temperature (ISO 2115:1996)
• DIN EN 61788-10:2007 Superconductivity - Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method (IEC 61788-10:2006); German version EN 61788-10:2006
• DIN EN 15758:2010-12 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and of the surfaces of objects; German version EN 15758:2010
• DIN EN 12697-13:2018-01 Bituminous mixtures - Test methods - Part 13: Temperature measurement; German version EN 12697-13:2017
• DIN 51866-1:2000 Temperature measurement - Part 1: Survey of laser spectroscopic methods
• DIN 50977:2005 Measurement of coating thickness - Non contact measurement of coating thickness on continuously moving objects
• DIN EN ISO 20049-1:2020-08 Solid biofuels - Determination of self-heating of pelletized biofuels - Part 1: Isothermal calorimetry (ISO 20049-1:2020); German version EN ISO 20049-1:2020
• DIN EN 15758:2010 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and of the surfaces of objects; German version EN 15758:2010
• DIN 50977:2005-12 Measurement of coating thickness - Non contact measurement of coating thickness on continuously moving objects
• DIN EN 61788-9:2006 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors (IEC 61788-9:2005); German version EN 61788-9:2005
• DIN EN 62373:2007-01 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) (IEC 62373:2006); German version EN 62373:2006
• DIN ISO 12219-6:2017 Interior air of road vehicles - Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature - Small chamber method (ISO 12219-6:2017)
• DIN ISO 16000-37:2019-05 Indoor air - Part 37: Measurement of PM<(Index)2,5> mass concentration (ISO 16000-37:2019)
• DIN EN 60682:1994 Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps (IEC 60682:1980 + A1:1987); German version EN 60682:1993
• DIN 51366:2013-12 Testing of mineral oil hydrocarbons - Measurement of kinematic viscosity by means of the Cannon-Fenske viscometer for opaque liquids
• DIN ISO/TS 13471-1:2022-01 Acoustics - Temperature influence on tyre/road noise measurement - Part 1: Correction for temperature when testing with the CPX method (ISO/TS 13471-1:2017)
• DIN 6855-1:2021-11 Constancy testing of nuclear medical measuring systems - Part 1: Radiation counting systems for measurements in vivo and in vitro
• DIN 5032-9:2015 Photometry - Part 9: Measurement of the photometric quantities of incoherent emitting semiconductor light sources
• DIN EN ISO 2812-5:2007 Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method (ISO 2812-5:2007)English version of DIN EN ISO 2812-5:2007-05
• DIN EN ISO 2812-5:2018-12 Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method (ISO 2812-5:2018); German version EN ISO 2812-5:2018
• DIN ISO 16000-37:2019 Indoor air - Part 37: Measurement of PM mass concentration (ISO 16000-37:2019)
• DIN 5032-9:2015-01 Photometry - Part 9: Measurement of the photometric quantities of incoherent emitting semiconductor light sources
• DIN EN ISO 20049-1:2020 Solid biofuels - Determination of self-heating of pelletized biofuels - Part 1: Isothermal calorimetry (ISO 20049-1:2020)
• DIN CEN/TS 15370-1:2006 Solid biofuels - Method for the determination of ash melting behaviour - Part 1: Characteristic temperatures method; German version CEN/TS 15370-1:2006
• DIN EN 12470-3:2009 Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device(includes Amendment A1:2009); English version of DIN EN 12470-3:2009-11
• DIN EN 16966:2019 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
• DIN ISO 16000-37:2018 Indoor air - Part 37: Measurement of PM mass concentration (ISO/DIS 16000-37:2018); Text in German and English
• DIN 51859:1990 Testing of gaseous fuels and other gases; gravimetric determination of the content of condensate as a function of pressure and temperature
• DIN 51366:1977 Testing of mineral oil hydrocarbons; measurement of kinematic viscosity by means of the Cannon-Fenske viscometer, for opaque liquids
• DIN EN ISO 105-E16:2007-09 Textiles - Tests for colour fastness - Part E16: Colour fastness to water spotting on upholstery fabrics (ISO 105-E16:2006); German version EN ISO 105-E16:2007
• DIN EN ISO 15193:2009-10 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009); German version EN ISO 15193:2009
• DIN EN 61788-2:2007 Superconductivity - Part 2: Critical current measurement - DC critical current of Nb<(Index)3>Sn composite superconductors (IEC 61788-2:2006); German version EN 61788-2:2007
• DIN EN 16966:2019-01 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration; German version EN 16966:2018
• DIN 51366:2013 Testing of mineral oil hydrocarbons - Measurement of kinematic viscosity by means of the Cannon-Fenske viscometer for opaque liquids

KR-KS, Measure the temperature inside an object

• KS M ISO 4266-4-2003(2023)
• KS M ISO 4266-5-2003(2023)
• KS M ISO 4266-6-2003(2023)
• KS C IEC 61788-10-2017 Superconductivity－Part 10：Critical temperature measurement－Critical temperature of Nb－Ti, Nb3Sn, and Bi－system oxide composite superconductors by a resistance method
• KS M ISO 4266-2-2003(2023)
• KS C IEC 61788-9-2016 Superconductivity – Part 9: Measurements for bulk high temperature superconductors – Trapped flux density of large grain oxide superconductors
• KS M ISO 1625-2007 Plastics－Polymer dispersions－Determination of non－volatile matter(residue) at specified temperatures
• KS E ISO 609-2003(2023) Solid mineral fuels－Determination of carbon and hydrogen sulfur－High temperature combustion method
• KS E ISO 622-2018 Solid mineral fuels — Determination of phosphorus content — Reduced molybdophosphate photometric method
• KS M ISO 2812-5-2022 Paints and varnishes — Determination of resistance to liquids — Part 5: Temperature-gradient oven method
• KS M ISO 91-2-2008(2023) Petroleum measurement tables－Part 2：Tables based on a reference temperature of 20℃
• KS C ISO 80601-2-56-2018 Medical electrical equipment — Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement
• KS C ISO 80601-2-56-2021 Medical electrical equipment — Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement
• KS M 2450-2007(2017)(英文版) Test method for low－temperature viscosity of automotive fluid lubricants measured by brookfield viscometer
• KS M ISO 91-1-2008(2023) Petroleum measurement tables－Part 1：Tables based on reference temperatures of 15℃ and 60℉
• KS M ISO 4266-1-2003(2023)

Professional Standard - Aerospace, Measure the temperature inside an object

• QJ 2302-1992 Method for measuring internal temperature of ablative materials

CZ-CSN, Measure the temperature inside an object

• CSN IEC 737:1994 In-core temperature or primary envelope temperature measurements in nuclear power reactor. Characteristics and test methods
• CSN 73 0512-1983 Measurement of sound insulation in buildings and of building elements. Statement of preoision requirements
• CSN 25 1238-1980 Vernier callipers with points for internal measurements, with depth gauge
• CSN 25 1235-1974 Vernier callipers with circular dial with points for male measurements and depth gauge
• CSN 02 7202-1991 Mean of industrial-process measurement and control. Thermometer pockets with internal thread. Basic dimensions
• CSN 73 0513-1983 Measurement of aound insulation in buildings and of building elements. Laboratory measurements of airborne sound insulation
• CSN 25 1235-1985 Vernier callipers with points for internal measurements, with circular dial and depth gauge. Technical regulations

Korean Agency for Technology and Standards (KATS), Measure the temperature inside an object

• KS M ISO 8310-2003(2008) Refrigerated light hydrocarbon fluids－Measurement of temperature in tanks containing liquefied gases－Resistance thermometers and thermocouples
• KS A 0512-2009 Method of temperature measurement by liquid-in-glass thermometers
• KS B 6007-2014(2019) Temperature measurements of performance forreciprocating internal combustion engines
• KS I 2005-2005 Air quality-Determination of gaseous sulphur compounds in ambient air(Sampling equipment)
• KS C IEC 61788-10-2017(2022) Superconductivity－Part 10：Critical temperature measurement－Critical temperature of Nb－Ti, Nb3Sn, and Bi－system oxide composite superconductors by a resistance method
• KS C IEC 61788-10:2003 Superconductivity－Part 10：Critical temperature measurement－Critical temperature of Nb－Ti, Nb3Sn, and Bi－system oxide composite superconductors by a resistance method
• KS C IEC 61788-10:2017 Superconductivity－Part 10：Critical temperature measurement－Critical temperature of Nb－Ti, Nb3Sn, and Bi－system oxide composite superconductors by a resistance method
• KS C IEC 61788-9-2016(2021) Superconductivity – Part 9: Measurements for bulk high temperature superconductors – Trapped flux density of large grain oxide superconductors
• KS C IEC 61788-9:2016 Superconductivity – Part 9: Measurements for bulk high temperature superconductors – Trapped flux density of large grain oxide superconductors
• KS M ISO 4266-4-2003(2018)
• KS R ISO 8178-1:2007 Reciprocating internal combustion engines－Exhaust emission measurement－Part 1 : Test-bed measurement of gaseous and particulate exhaust emissions
• KS M ISO 4266-6-2003(2018)
• KS M ISO 1625:2007 Plastics－Polymer dispersions－Determination of non－volatile matter(residue) at specified temperatures
• KS M ISO 1625:2012 Plastics-Polymer dispersions-Determination of non-volatile matter(residue) at specified temperatures
• KS R ISO 8178-2:2007 Reciprocating internal combustion engines－Exhaust emission measurement－Part 2：Measurement of gaseous and particulate exhaust emissions at site
• KS M ISO 4266-5-2003(2018)
• KS C 6111-1-2005(2020) Superconductivity－Critical temperature measurement－Critical temperature of Nb-Ti, Nb3Sn, and Bi-system compositesuperconductors by a magnetic method using a SQUID magnetometer
• KS E ISO 351:2003 Solid mineral fuels－Determination of total sulfur－High temperature combustion method
• KS E ISO 609:2003 Solid mineral fuels－Determination of carbon and hydrogen sulfur－High temperature combustion method
• KS M 1133-2-2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
• KS M ISO 1133-2:2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
• KS R ISO 8178-3:2007 Reciprocating internal combustion engines－Exhaust emission measurement－Part 3：Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
• KS C 6111-2-2005(2020) Superconductivity－Critical temperature measurement－Critical temperature of Nb-Ti, Nb3Sn, and Bi-system composite superconductors by a magnetic method using an ac susceptometer
• KS H ISO 4112:2009 Cereals and pulses－Guidance on measurement of the temperature of grain stored in bulk
• KS E ISO 622:2018 Solid mineral fuels — Determination of phosphorus content — Reduced molybdophosphate photometric method
• KS M ISO 2812-5:2012 Paints and varnishes－Determination of resistance to liquids－Part 5：Temperature-gradient oven method
• KS M ISO 2812-5:2022 Paints and varnishes — Determination of resistance to liquids — Part 5: Temperature-gradient oven method
• KS M ISO 2812-5-2012(2017) Paints and varnishes－Determination of resistance to liquids－Part 5：Temperature-gradient oven method
• KS M ISO 4266-1-2003(2018)
• KS C ISO 80601-2-56:2018 Medical electrical equipment — Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement
• KS C ISO 80601-2-56:2021 Medical electrical equipment — Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement
• KS M ISO 4266-4:2003 Petroleum and liquid petroleum products－Measurement of level and temperature in storage tanks by automatic methods－Part 4：Measurement of temperature in atmospheric tanks
• KS P ISO 15193-2014(2019) In vitro diagnostic medical devices — Measurement of quantities in samples of biological origin — Requirements for content and presentation of reference measurement procedures
• KS I 1534-2012 Interior air of road vehicles-Part 2:Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials-Bag method
• KS M 2450-2007(2017) Test method for low－temperature viscosity of automotive fluid lubricants measured by brookfield viscometer
• KS T 1329-2012 Testing method for inter bond strength of paper and paperboard as measured by z-directional tensile test
• KS M ISO 4266-5:2003 Petroleum and liquid petroleum products－Measurement of level and temperature in storage tanks by automatic methods－Part 5：Measurement of temperature in marine vessels
• KS I ISO 13641-2:2010 Water quality-Determination of inhibition of gas production of anaerobic bacteria-Part 2:Test for low biomass concentrations
• KS H ISO 3727-2:2006 Butter－Determination of moisture, non-fat solids and fat contents－Part 2：Determination of non-fat solids content(Reference method)
• KS R ISO 8178-6:2009 Reciprocating internal combustion engines－Exhaust emission measurement－Part 6：Report of measuring results and test

British Standards Institution (BSI), Measure the temperature inside an object

• 22/30454351 DC BS EN 13485. Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods. Tests, performance, suitability
• 22/30454354 DC BS EN 13486. Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods. Periodic verification
• BS EN 61788-10:2003 Superconductivity - Critical temperature measurement - Critical temperature of Nb-Ti, Nb3Sn, and Bi-system oxide composite superconductors by a resistance method
• BS EN 61788-10:2002 Superconductivity - Critical temperature measurement - Critical temperature of Nb-Ti, Nb3Sn, and Bi-system oxide composite superconductors by a resistance method
• BS EN 61788-9:2005 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
• BS EN 61788-10:2006 Superconductivity - Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method
• BS 1041 Sec.2.1:1985 Temperature measurement. Expansion thermometers. Guide to selection and use of liquid-in-glass thermometers
• BS EN 15758:2010 Conservation of cultural property. Procedures and instruments for measuring temperatures of the air and the surfaces of objects
• BS 1041-2.1:1985 Code for temperature measurement - Expansion thermometers - Guide to selection and use of liquid-in-glass thermometers
• BS ISO 4266-4:2023 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods - Measurement of temperature in atmospheric tanks
• BS 4317-26:1991 Methods of test for cereals and pulses. Measurement of temperature of grain during bulk storage
• BS 2782-7 Method 740C:1996 Methods of testing plastics. Rheological properties. Polymer dispersions. Determination of white point temperature and minimum film-forming temperature
• BS DD CEN/TS 15370-1:2007 Solid biofuels. Method for the determination of ash melting behaviour. Characteristic temperatures method
• BS DD CEN/TS 15370-1:2006 Solid biofuels — Method for the determination of ash melting behaviour — Part 1: Characteristic temperatures method
• BS EN 12470-4:2000+A1:2009 Clinical thermometers — Part 4: Performance of electrical thermometers for continuous measurement
• PD CLC/TS 50707:2020 Clothes washing machines and washer-dryers for household and similar use. Method for the determination of temperature inside the laundry load
• BS 1041-7:1988 Temperature measurement - Guide to selection and use of temperature/time indicators
• 22/30461348 DC BS ISO 4266-4. Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods - Part 4. Measurement of temperature in atmospheric tanks
• BS 1041-3:1989 Temperature measurement - Guide to selection and use of industrial resistance thermometers
• BS EN ISO 20049-1:2020 Solid biofuels. Determination of self-heating of pelletized biofuels - Isothermal calorimetry
• BS 1041-5:1990 Temperature measurement. Guide to selection and use of radiation pyrometers
• BS 1041-5:1989 Temperature measurement - Guide to selection and use of radiation pyrometers
• BS ISO 8178-2:2009 Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions under field conditions
• BS ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Measurement of gaseous and particulate exhaust emissions under field conditions
• BS EN ISO 18846:2016 Solid biofuels. Determination of fines content in quantities of pellets
• BS ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
• BS 7755-5.6:1999 Soil quality - Physical methods - Determination of dry bulk density
• BS IEC 60747-14-11:2021 Semiconductor devices - Semiconductor sensors. Test method of surface acoustic wave-based integrated sensors for measuring ultraviolet, illumination and temperature
• BS EN ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures
• 19/30313883 DC BS EN ISO 20049-1. Solid biofuels. Determination of self-heating of pelletized biofuels. Part 1. Isothermal calorimetry
• 18/30362458 DC BS IEC 60747-14-11. Semiconductor devices. Part 14-11. Semiconductor sensors. Test method of surface acoustic wave based integrated sensor for measuring ultra violet, illumination and temperature
• 19/30390371 DC BS IEC 60747-14-11. Semiconductor devices. Part 14-11. Semiconductor sensors. Test method of surface acoustic wave based integrated sensor for measuring ultra violet, illumination and temperature
• BS IEC 62373-1:2020 Semiconductor devices. Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) - Fast BTI test for MOSFET
• BS 1042 Sec.2.2:1983 Measurement of fluid flow in closed conduits. Velocity area methods. Method of measurement of velocity at one point of a conduit of circular cross section
• BS 1042 Sec.2.1:1983 Measurement of fluid flow in closed conduits. Velocity area methods. Method using Pitot static tubes
• BS EN 60749-7:2011 Semiconductor devices. Mechanical and climatic test methods. Internal moisture content measurement and the analysis of other residual gases
• BS EN ISO 13788:2012 Hygrothermal performance of building components and building elements. Internal surface temperature to avoid critical surface humidity and interstitial condensation. Calculation methods
• BS EN 16966:2018 Workplace exposure. Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates. Metrics to be used such as number concentration, surface area concentration and mass concentration
• 17/30366375 DC BS IEC 62373-1. Semiconductor devices. Bias-temperature stability test for metal-oxide semiconductor field-effect transistors (MOSFET). Part 1. Fast BTI Test method
• 18/30381548 DC BS EN 62373-1. Semiconductor devices. Bias-temperature stability test for metal-oxide semiconductor field-effect transistors (MOSFET). Part 1. Fast BTI Test method

Professional Standard - Nuclear Industry, Measure the temperature inside an object

• EJ/T 1105-1999 Determination of temperature for fluid inclussion in minerals

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Measure the temperature inside an object

• GB/T 24959-2010 Refrigerated light hydrocarbon fluids.Measurement of temperature in tanks containing liquefied gases.Resistance thermometers and thermocouples
• GB/T 21451.4-2008 Petroleum and liquid petroleum products.Measurement of level and temperature in storage tanks by automatic methods.Part 4:Measurement of temperature in atmospheric tanks
• GB/T 8190.2-2011 Reciprocating internal combustion engines.Exhaust emission measurement.Part 2: Measurement of gaseous and particulate exhaust emissions at site
• GB/T 8190.2-1999 Reciprocating internal combustion engines Exhaust emission measurement--Part 2: Measurement of gaseous and particulate exhaust emissions at site
• GB/T 8190.1-1999 Reciprocating internal combustion engines--Exhaust emission measurement--Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
• GB/T 8190.1-2010 Reciprocating internal combustion engines.Exhaust emission measurement.Part 1:Test-bed measurement of gaseous and particulate exhaust emissions
• GB/T 21756-2008 Chemical products for industrial use.Determination of relative temperature of spontaneous flammable of solids
• GB/T 9267-2008 Emulsions for coatings and polymer dispersions for coatings and plastics.Determination of white point temperature and minimum film-forming temperature
• GB/T 8190.1-2023 Emission measurement of reciprocating internal combustion engines - Part 1: Test bench measurement systems for gaseous and particulate emissions
• GB/T 20152-2006 Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps
• GB/T 21451.1-2015 Petroleum and liquid petroleum products.Measurement of level and temperature in storage tanks by automatic methods.Part 1:Measurement of level in atmospheric tanks
• GB/T 25749.8-2012 Safety of machinery.Evaluation of the emission of airborne hazardous substances.Part 8:Room method for the measurement of the pollutant concentration parameter
• GB/T 36214.4-2018 Plastics.Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography.Part 4:High-temperature method
• GB/T 31253-2014 Natural gas.Validation for gaseous reference materials.Direct measurement of calorific value and density
• GB/T 30648.5-2015 Paints and varnishes.Determination of resistance to liquids.Part 5:Temperature-gradient oven methods

Japanese Industrial Standards Committee (JISC), Measure the temperature inside an object

• JIS Z 8705:1992 Method of temperature measurement by liquid-in-glass thermometers
• JIS B 8007:1987 Temperature measurements of performance for reciprocating internal combustion engines
• JIS H 7309:2006 Superconductivity -- Part 10: Critical temperature measurement -- Critical temperature of Nb-Ti, Nb3Sn, and Bi-system oxide composite superconductors by a resistance method
• JIS H 7313:2007 Superconductivity -- Measurements for bulk high temperature superconductors -- Trapped flux density of large grain oxide superconductors
• JIS B 8008-2:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
• JIS C 8920:2005 Measuring method of equivalent cell temperature for crystalline solar cells by the open-circuit voltage
• JIS C 60068-3-7:2008 Environmental testing -- Part 3-7: Supporting documentation and guidance -- Measurements in temperature chambers for tests A and B (with load)

BR-ABNT, Measure the temperature inside an object

• ABNT NBR 14837-2011
• ABNT P-MB-157

National Metrological Technical Specifications of the People's Republic of China, Measure the temperature inside an object

• JJF 1107-2003 Calibration Specification for Infrared Thermometers for Measurement of Human Temperature

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Measure the temperature inside an object

• ASHRAE MN-00-7-1-2000 Surface Temperature Measurements Inside an Insulated Glazing Unit Using Liquid Crystals
• ASHRAE KC-03-12-2-2003 A Comparison of Calculated and Measured Indoor-Side Window Temperature Profiles
• ASHRAE SF-98-20-4-1998 Impact of Velocity and Temperature Fluctuations on the Accuracy of Low-Velocity Measurements Indoors by Thermal Anemometers
• ASHRAE TO-98-12-5-1998 The Effects of Varying Indoor Air Temperature and Heat Gain on the Measurement of Retrofit Savings
• ASHRAE 3660-1993 Measurement of Pressure- Temperature- Concentration Relations for Mixtures of R-12/ Mineral Oil and R-134a Synthetic Oil
• ASHRAE 3951-1996 Indoor Humidity and Human Health - Part I: Literature Review of Health Effects of Humidity-Influenced Indoor Pollutants

PT-IPQ, Measure the temperature inside an object

• NP 3252-1987
• NP ISO 4112:2001 Cereals and pulses Guidance on measurement of the temperature of grain stored in bulk
• NP EN 1052-1-2000 Methods of test for masonry Part 1:Determination of compressive strength

Association Francaise de Normalisation, Measure the temperature inside an object

• NF C31-888-10*NF EN 61788-10:2006 Superconductivity - Part 10 : critical temperature measurement - Critical temperature of composite superconductors by a resistance method
• NF C31-888-9*NF EN 61788-9:2005 Superconductivity - Part 9 : measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors.
• NF EN 61788-9:2005 Supraconductivité - Partie 9 : mesures pour supraconducteurs haute température massifs - Densité de flux résiduel des oxydes supraconducteurs à gros grains
• NF C31-888-10:2003 Superconductivity - Part 10 : critical temperature measurement - Critical temperature of Nb-Ti, Nb3Sn, and Bi-system oxide composite superconductors by a resistance method.
• NF X80-010*NF EN 15758:2010 Conservation of cultural property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects.
• NF EN 12697-13:2017 Mélanges Bitumineux - Méthodes dessai - Partie 13 : mesure de la température
• NF EN 15758:2010 Conservation des biens culturels - Méthodes et instruments de mesure de la température de l'air et de la surface des objets
• NF V30-106*NF ISO 4112:1991 Cereals and pulses. Guidance on measurement of the tempetaure of grain stored in bulk.
• NF EN ISO 18854:2015 Petits navires - Moteurs alternatifs à combustion interne mesurage des émissions de gaz d'échappement - Mesurage des émissions de gaz et de particules au banc
• NF S97-150-4:2009 Clinical thermometers - Part 4 : Performance of electrical thermometers for continuous measurement.
• NF EN ISO 20049-1:2020 Biocombustibles solides - Détermination de l'auto-échauffement des granulés de biocombustibles - Partie 1 : détermination calorimétrique isotherme
• NF EN 61788-10:2006 Supraconductivité - Partie 10 : mesure de la température critique - Température critique des composites supraconducteurs par une méthode par résistance
• NF P98-818-13:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 13 : temperature measurement.
• NF X43-408-6*NF ISO 12219-6:2018 Interior air of road vehicles - Part 6 : Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature - Small chamber method
• NF X34-242-1*NF EN ISO 20049-1:2020 Solid biofuels - Determination of self-heating of pelletized biofuels - Part 1 : isothermal calorimetry
• NF E37-211-2:1996 Reciprocating internal combustion engines. Exhaust emission measurement. Part 2 : measurement of gaseous and particulate exhaust emissions at site.
• NF UTE C46-406:1985 Mesure et commande dans les processus industriels - Indicateurs configurables de température et grandeurs physiques.
• NF ISO 4112:1991 Céréales et légumineuses - Directives générales pour le mesurage de la température des grains entreposes en vrac dans les installations de stockage
• NF EN 62373:2006 Essai de stabilité de température en polarisation pour transistors à effet de champ métal-oxyde-semiconducteur (MOSFET)
• NF S31-098-2*NF EN ISO 15186-2:2011 Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 2 : field measurements
• NF T60-152:1979 Produits pétroliers - Mesure de la viscosité à basse température au moyen du viscosimètre Brookfield - Méthode à bain liquide.
• NF E37-211-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
• NF M60-823-3:2022 Nuclear energy - Radioactivity measurement in gaseous effluents - Determination of noble gas activity in gaseous effluents and gas discharge - Part 3 : real time monitoring used for the volumetric activity of noble gas
• NF E48-392-2*NF ISO 15086-2:2001 Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 2 : measurement of the speed of sound in a fluid in a pipe
• NF E37-211-1*NF ISO 8178-1:2020 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement systems of gaseous and particulate emissions
• NF EN ISO 80601-2-56:2017 Appareils électromédicaux - Partie 2-56 : exigences particulières relatives à la sécurité fondamentale et aux performances essentielles des thermomètres médicaux pour mesurer la température de corps
• NF M60-823-0:2022 Nuclear energy - Radioactivity measurement in gaseous effluents - Determination of noble gas activity in gaseous effluents - Part 0 : calculation of noble gas released activities
• NF T30-053-5*NF EN ISO 2812-5:2018 Paints and varnishes - Determination of resistance to liquids - Part 5 : temperature-gradient oven method
• NF EN ISO 2812-5:2018 Peintures et vernis - Détermination de la résistance aux liquides - Partie 5 : méthode au four à gradient de température
• NF C57-104:1995 Procedures for temperature and irradiance corrections to measured i-V characteristics of crystalline silicon photovoltaic devices.
• NF EN IEC 61757-2-1:2021 Capteurs fibroniques - Partie 2-1 : mesure de la température - Capteurs de température basés sur des réseaux de Bragg à fibres
• FD X07-029-3:2015 Metrology - Thermometer calibration and verification procedure - Part 3 : calibration and verification procedure for liquid in glass thermometers
• NF C93-800-2-1*NF EN IEC 61757-2-1:2021 Fibre optic sensors - Part 2-1 : temperature measurement - Temperature sensors based on fibre Bragg gratings
• NF X43-602*NF EN 16966:2018 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
• NF S95-186-2-56*NF EN ISO 80601-2-56:2017 Medical electrical equipment - Part 2-56 : particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement
• NF E37-211-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2 : measurement of gaseous and particulate exhaust emissions under field conditions.
• XP S31-018-1*XP ISO/TS 13471-1:2017 Acoustics - Temperature influence on tyre/road noise measurement - Part 1 : correction for temperature when testing with the CPX method
• NF X43-101:1986 Air quality. Method of measurement of the odour of gaseous effluent. Determination of the dilution factor at the threshold of perception.
• NF E37-211-1:1997 Reciprocating internal combustion engines. Exhaust emission measurement. Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
• NF M60-823-1:2022 Nuclear energy - Radioactivity measurement in gaseous effluents - Determination of noble gas activity in gaseous effluents and gas discharge - Part 1 : sampling of noble gas in gaseous effluents
• NF EN ISO 80601-2-56/A1:2020 Appareils électromédicaux - Partie 2-56 : exigences particulières relatives à la sécurité fondamentale et aux performances essentielles des thermomètres médicaux pour mesurer la température de corps - AMENDEMENT 1
• NF EN 16966:2018 Exposition sur les lieux de travail - Mesurage de l'exposition par inhalation de nano-objets et de leurs agrégats et agglomérats - Métriques à utiliser telles que concentration en nombre, concentration en surface et concentration en masse
• NF P50-751-1*NF EN ISO 52017-1:2017 Energy performance of buildings - Sensible and latent heat loads and internal temperatures - Part 1 : generic calculation procedures
• XP T90-716-1:2015 Water quality - In vivo measurement by fluorescence of the endocrine disrupting effects of natural waters and wastewater - Part 1 : measurement of the effects on the thyroid axis of amphibian embryos (Xenopus Laevis)
• NF X43-404-34*NF ISO 16000-34:2019 Indoor air - Part 34 : strategies for the measurement of airborne particles
• NF EN IEC 61788-7:2020 Supraconductivité - Partie 7 : mesurages des caractéristiques électroniques - Résistance de surface des supraconducteurs haute température critique aux hyperfréquences
• NF X35-114-2*NF EN ISO 14505-2:2007 Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2 : determination of equivalent temperature.
• NF S92-019*NF EN ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures
• NF EN 13631-16:2005 Explosifs à usage civil - Explosifs - Partie 16 : détection et mesurage des gaz toxiques

Danish Standards Foundation, Measure the temperature inside an object

• DS/EN 61788-10:2007 Superconductivity - Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method
• DS/EN 15758:2011 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects
• DS/EN 61788-9:2005 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
• DS/EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
• DS/CEN/TS 15370-1:2007 Solid biofuels - Method for the determination of ash melting behaviour - Part 1: Characteristic temperatures method
• DS/EN 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET)
• DS/EN ISO 2812-5:2007 Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method
• DS/EN ISO 13792:2012 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified methods
• DS/EN IEC 61757-2-1:2021 Fibre optic sensors – Part 2-1: Temperature measurement – Temperature sensors based on fibre Bragg gratings
• DS/EN ISO 80601-2-56:2012 Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement

Group Standards of the People's Republic of China, Measure the temperature inside an object

• T/CRES 0009-2022 Testing method of thermochemical energy storage temperature and energy density for solid compounds

International Electrotechnical Commission (IEC), Measure the temperature inside an object

• IEC 61788-10:2006 Superconductivity - Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method
• IEC 61788-9:2005 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
• IEC 60682:1980 Standard method of measuring the pinch temperature of quartz-tungstenhalogen lamps
• IEC 61757-2-1:2021 Fibre optic sensors - Part 2-1: Temperature measurement - Temperature sensors based on fibre Bragg gratings
• IEC 60747-14-11:2021 Semiconductor devices - Part 14-11: Semiconductor sensors - Test method of surface acoustic wave-based integrated sensors for measuring ultraviolet, illumination and temperature
• IEC 60068-3-7:2001 Environmental testing - Part 3-7: Supporting documentation and guidance; Measurements in temperature chambers for test A and B (with load)

Association of German Mechanical Engineers, Measure the temperature inside an object

• VDI/VDE 2640 Blatt 4-1983 Measurement of mean temperature in fluid flow
• VDI 3862 Blatt 8-2015 Measurement of gaseous emissions - Measurement of formaldehyde in the exhaust gas of combustion engines - FTIR method

European Committee for Electrotechnical Standardization（CENELEC）, Measure the temperature inside an object

• EN 61788-9:2005 Superconductivity Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
• EN 61788-10:2006 Superconductivity Part 10: Critical temperature measurement Critical temperature of composite superconductors by a resistance method
• EN 60191-6-19:2010 Mechanical standardization of semiconductor devices - Part 6-19: Measurement methods of the package warpage at elevated temperature and the maximum permissible warpage

International Organization for Standardization (ISO), Measure the temperature inside an object

• ISO/TR 27957:2008 Road vehicles - Temperature measurement in anthropomorphic test devices - Definition of the temperature sensor locations
• ISO 2115:1996 Plastics - Polymer dispersions - Determination of white point temperature and minimum film-forming temperature
• ISO 4112:1979 Cereals and pulses — Measurement of the temperature of grain stored in silos
• ISO 8310:1991 Refrigerated light hydrocarbon fluids; measurement of temperature in tanks containing liquefied gases; resistance thermometers and thermocouples
• ISO/CD 4266-5:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 5: Measurement of temperature in marine vessels
• ISO 2115:1976 Plastics; Aqueous dispersions of polymers and copolymers; Determination of white point temperature and minimum film-forming temperature
• ISO 4266-4:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 4: Measurement of temperature in atmospheric tanks
• ISO 8178-2:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site
• ISO 16000-37:2019 Indoor air — Part 37: Measurement of PM2,5 mass concentration
• ISO/CD 4266-6:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 6: Measurement of temperature in pressurized storage tanks (non-refrigerated)
• ISO 8178-1:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
• ISO 351:1984 Solid mineral fuels; Determination of total sulfur; High temperature combustion method
• ISO 1625:1998 Plastics - Polymer dispersions - Determination of non-volatile matter (residue) at specified temperatures
• ISO 20049-1:2020 Solid biofuels — Determination of self-heating of pelletized biofuels — Part 1: Isothermal calorimetry
• ISO 609:1996 Solid mineral fuels - Determination of carbon and hydrogen - High temperature combustion method
• ISO 124:1997/Amd 2:2008 Latex, rubber - Determination of total solids content - Amendment 2: Determination at temperatures higher than 105 °C
• ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures
• ISO 4112:1990 Cereals and pulses; guidance on measurement of the temperature of grain stored in bulk
• ISO 1959:1973 Textile floor coverings — Determination of measured surface pile density and measured pile fibre volume ratio
• ISO/TS 13471-1:2017 Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method
• ISO 2812-5:2007 Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method
• ISO 2812-5:2018 Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method
• ISO 29042-8:2011 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Room method for the measurement of the pollutant concentration parameter
• ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
• ISO/DIS 4266-2:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels
• ISO/PRF 4266-2:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels
• ISO 91-1:1982 Petroleum measurement tables — Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F
• ISO 4266-4:2002 Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Part 4: Measurement of temperature in atmospheric tanks
• ISO 19935-2:2020 Plastics — Temperature modulated DSC — Part 2: Measurement of specific heat capacity cp
• ISO 80601-2-56:2009 Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement
• ISO 80601-2-56:2017 Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement
• ISO 13641-2:2003 Water quality - Determination of inhibition of gas production of anaerobic bacteria - Part 2: Test at low biomass concentrations
• ISO 609:1996/Cor 1:1996 Solid mineral fuels - Determination of carbon and hydrogen - High temperature combustion method
• ISO 16000-34:2018 Indoor air - Part 34: Strategies for the measurement of airborne particles
• ISO 14505-2:2006 Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature
• ISO 3727-2:2001|IDF 80-2:2001 Butter — Determination of moisture, non-fat solids and fat contents — Part 2: Determination of non-fat solids content (Reference method)
• ISO 3727-2:2001 Butter - Determination of moisture, non-fat solids and fat contents - Part 2: Determination of non-fat solids content (Reference method)
• ISO/TS 13471-2:2022 Acoustics — Temperature influence on tyre/road noise measurement — Part 2: Correction for temperature when testing with the pass-by methods
• ISO 4266-1:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 1: Measurement of level in atmospheric tanks

未注明发布机构, Measure the temperature inside an object

• BS 1041-2.1:1985(2007) Temperature measurement — Part 2 : Expansion thermometers — Section 2.1 Guide to selection and use of liquid - in - glass thermometers
• BS 1041-7:1988(1999) Temperature measurement — Part 7 : Guide to selection and use of temperature / time indicators
• BS 1041-2.2:1989(2000) Temperature measurement — Part 2 : Expansion thermometers — Section 2.2 Guide to selection and use of dial - type expansion thermometers
• BS 6319-9:1987(1999) Testing of resin compositions for use in construction — Part 9 : Method for measurement and classification of peak exotherm temperature
• BS 1041-4:1992(1999) Temperature measurement — Part 4 : Guide to the selection and use of thermocouples
• BS EN ISO 15193:2009(2016) In vitro diagnostic medical devices — Measurement of quantities in samples of biological origin — Requirements for content and presentation of reference measurement procedures

ES-UNE, Measure the temperature inside an object

• UNE-EN 61788-9:2005 Superconductivity -- Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors (Endorsed by AENOR in November of 2005.)
• UNE-EN 12697-13:2018 Bituminous mixtures - Test methods - Part 13: Temperature measurement
• UNE-CLC/TS 50707:2021 EX:2021 Clothes washing machines and washer-dryers for household and similar use - Method for the determination of temperature inside the laundry load
• UNE-EN ISO 20049-1:2021 Solid biofuels - Determination of self-heating of pelletized biofuels - Part 1: Isothermal calorimetry (ISO 20049-1:2020)
• UNE-EN 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) (IEC 62373:2006). (Endorsed by AENOR in November of 2006.)
• UNE-EN ISO 2812-5:2020 Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method (ISO 2812-5:2018)
• UNE-EN IEC 61757-2-1:2021 Fibre Optic Sensors - Part 2-1: Temperature measurement - Temperature sensors based on fibre Bragg gratings (Endorsed by Asociación Española de Normalización in November of 2021.)
• UNE-EN IEC 62828-3:2018 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters (Endorsed by Asociación Española de Normalización in August of 2018.)
• UNE-EN ISO 52017-1:2017 Energy performance of buildings - Sensible and latent heat loads and internal temperatures - Part 1: Generic calculation procedures (ISO 52017-1:2017) (Endorsed by Asociación Española de Normalización in December of 2017.)
• UNE-EN 16966:2022 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration

CENELEC - European Committee for Electrotechnical Standardization, Measure the temperature inside an object

• EN 61788-10:2002 Superconductivity Part 10: Critical temperature measurement - Critical temperature of Nb-Ti@ Nb3Sn@ and Bi-system oxide composite superconductors by a resistance method
• EN 60891:1994 Procedures for Temperature and Irradiance Corrections to Measured I- V Characteristics of Crystalline Silicon Photovoltaic Devices
• EN 60793-1-52:2002 Optical fibres Part 1-52: Measurement methods and test procedures Change of temperature
• PREN 50359-1-2-2000 Advanced Technical Ceramics Part 1-2: Electrical Properties - Determination of the Surface and Volume Resistivity in the Temperature Range 20 Degrees C to 800 Degrees C

European Committee for Standardization (CEN), Measure the temperature inside an object

• EN 15758:2010 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects
• EN 12697-13:2017 Bituminous mixtures - Test methods - Part 13: Temperature measurement
• EN ISO 20049-1:2020 Solid biofuels - Determination of self-heating of pelletized biofuels - Part 1: Isothermal calorimetry (ISO 20049-1:2020)
• PD CEN/TS 15370-1:2006 Solid biofuels - Method for the determination of ash melting behaviour - Part 1: Characteristic temperatures method
• EN ISO 80601-2-56:2017 Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement
• EN ISO 2812-5:2007 Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method (ISO 2812-5:2007)
• EN 12470-4:2000 Clinical thermometers - Part 4: Performance of electrical thermometers for continuous measurement Incorporates Amendment A1: 2009
• EN ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009)
• EN ISO 80601-2-56:2012 Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement
• EN 12697-13:2000/AC:2001 Bituminous Mixtures - Test Methods for Hot Mix Asphalt - Part 13: Temperature Measurement Corrigendum; Ratified European Text
• EN ISO 80601-2-56:2017/A1:2020 Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement - Amendment 1 (ISO 80601-2-56:2017/Amd 1:2018)
• EN 12788:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Measure the temperature inside an object

• JEDEC JEP84A-2004 Recommend Practice for Measurement of Transistor Lead Temperature

IN-BIS, Measure the temperature inside an object

• IS 6524-1972
• IS 12763-1989
• IS 1528 Pt.5-1993
• IS 10000 Pt.3-1980

Lithuanian Standards Office , Measure the temperature inside an object

• LST EN 61788-10-2007 Superconductivity - Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method (IEC 61788-10:2006)
• LST EN 15758-2010 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects
• LST EN 61788-9-2005 Superconductivity. Part 9: Measurements for bulk high temperature superconductors. Trapped flux density of large grain oxide superconductors (IEC 61788-9:2005)
• LST ISO 4266-4:2003 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Part 4: Measurement of temperature in atmospheric tanks (idt ISO 4266-4:2002)
• LST ISO 4266-5:2003 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Part 5: Measurement of temperature in marine vessels (idt ISO 4266-5:2002)
• LST EN 12470-4-2002+A1-2009 Clinical thermometers - Part 4: Performance of electrical thermometers for continuous measurement
• LST ISO 4266-6:2003 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Part 6: Measurement of temperature in pressurized storage tanks (non- refrigerated) (idt ISO 4266-6:2002)
• LST EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
• LST EN 62373-2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) (IEC 62373:2006)

AENOR, Measure the temperature inside an object

• UNE-EN 61788-10:2007 Superconductivity -- Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method (IEC 61788-10:2006).
• UNE-ISO 8310:2005 Refrigerated light hydrocarbon fluids -- Measurement of temperature in tanks containing liquefied gases -- Resistance thermometers and thermocouples
• UNE-EN 15758:2011 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects

HU-MSZT, Measure the temperature inside an object

• MSZ 6026-2.lap-1958
• MSZ 6025-1.lap-1958
• MSZ MI 11210/1-1972
• MSZ 6025-2.lap-1958
• MSZ 6012-2.lap-1958
• MSZ 10197-1962
• MSZ 2406-1978
• MSZ 6012-1.lap-1958
• MNOSZ 11726-1953
• MSZ 21456/6-1982

国家市场监督管理总局、中国国家标准化管理委员会, Measure the temperature inside an object

• GB/T 21451.5-2019 Petroleum and liquid petroleum products—Measurement of level and temperature in storage tanks by automatic methods—Part 5: Measurement of temperature in marine vessels
• GB/T 24959-2019 Refrigerated light hydrocarbon fluids—General requirements for temperature measurement system in cargo tanks of LNG carrier
• GB/T 38340-2019 Small craft—Reciprocating internal combustion engines exhaust emission measurement—Test-bed measurement of gaseous and particulate exhaust emissions
• GB/T 21451.2-2019 Petroleum and liquid petroleum products—Measurement of level and temperature in storage tanks by automatic methods—Part 2:Measurement of level in marine vessels
• GB/T 19702-2021 In vitro diagnostic medical devices—Measurement of quantities in samples of biological origin—Requirements for content and presentation of reference measurement procedures
• GB/T 36214.3-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method

CL-INN, Measure the temperature inside an object

• INDITECNOR 20-22ch-1960
• INDITECNOR 20-13ch-1960
• INDITECNOR 23-55ch-1956

VE-FONDONORMA, Measure the temperature inside an object

• COVENIN 703-1974

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Measure the temperature inside an object

• GB/T 21451.6-2017 Petroleum and liquid petroleum products—Measurement of level and temperature in storage tanks by automatic methods—Part 6: Measurement of temperature in pressurized storage tanks (non-refrigerated)
• GB/T 30537-2014 Superconductivity―Measurements for bulk high temperature superconductors―Trapped flux density of large grain oxide superconductors
• GB/T 21451.3-2017 Petroleum and liquid petroleum products—Measurement of level and temperture in storage tanks by automatic methods—Part 3:Measurement of level in pressurized tanks(non-refrigerated)

RU-GOST R, Measure the temperature inside an object

• GOST 28268-1989 Soils. Methods of determination of moisture, maximum hygroscopic moisture and moisture of steady plant fading
• GOST R 53762-2009 Natural combustible gases. Determination of hydrocarbon dew point temperature
• GOST ISO 8178-2-2013 Reciprocating internal combustion engines. Exhaust emission measurement. Part 2. Measurement of gaseous and particulate exhaust emissions under field conditions
• GOST R 55125-2012 Solid biofuels. Method for the determination of ash melting behaviour. Part 1. Characteristic temperatures method
• GOST 18986.17-1973 Reference diodes. Method of measuring of temperature coefficient of working voltage
• GOST R ISO 15193-2015 In vitro medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures
• GOST 3168-1993 Solid mineral fuels. Methods for determination of the yield of products by low temperature distillation
• GOST 8.511-1984 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring specific heat conduction of solid frames in the range of temperatures from 4,2 to 90 K
• GOST R 8.872-2014 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring specific enthalpy and specific heat-conguction of solid frames in the range of temperature from 700 to 1800 K
• GOST 28976-1991 Photovoltaic devices of crystalline silicon. Procedures for temperature and irradiance corrections to measured current voltage characteristics
• GOST R ISO 15194-2013 In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for certified reference materials and the content of supporting documentation
• GOST ISO 8178-1-2013 Reciprocating internal combustion engines. Exhaust emission measurement. Part 1. Test-bed measurement of gaseous and particulate exhaust emissions
• GOST 26253-2014 Buildings and constructions. Method for determining the building structure ability to maintain a relatively constant temperature of its inside surface under cycling thermal influence
• GOST 8.018-2007 State system for ensuring the uniformity of measurements. State verification schedule for means of LTEC measurements of solid substances in temperature range from 90 to 1800 K
• GOST 8.018-1982 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring temperature coefficient of linear expansion in the range from 90 to 1800 K
• GOST R 8.870-2014 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring of sound velocity in liquids within the velocity range 800 to 2000 m/s
• GOST R IEC 61853-1-2013 Photovoltaic modules. Determination of performance testing and energy rating. Part 1. Irradiance and temperature performance measurement according to irradiance and temperature. Power rating
• GOST 8.079-1979 State system for ensuring the uniformity of measurements. State primary standard of temperature unit in the range of 13,81 to 273,15k
• GOST 30501-1997 Solid electrical insulating materials. Method of measuring electrical resistance and resistivity at elevated temperatures
• GOST 8.312-1978 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring instruments of variable temperature of water medium in the range of pulsation amplitudes of temperatures within 0,01 -

Indonesia Standards, Measure the temperature inside an object

• SNI 05-6047.1-1999 Heat exchanger - Method for parameter measurement for performance determination. Part 1: Temperature and fluid quality
• SNI ISO 80601-2-56:2012 Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement

VN-TCVN, Measure the temperature inside an object

• TCVN 6852-2-2010 Reciprocating internal combustion engines.Exhaust emission measurement.Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
• TCVN 6852-1-2008 Reciprocating internal combustion engines.Exhaust emission measurement.Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
• TCVN 4916-2007 Solid mineral fuels.Determination of total sulfur.High temperature combustion method
• TCVN 4996-1-2011 Cereals.Determination of bulk density, called mass per hectolitre.Part 1: Reference method
• TCVN 4996-3-2011 Cereals.Determination of bulk density, called mass per hectolitre.Part 3: Routine method
• TCVN 7556-3-2005 Health care solid waste incinerators.Determination of the mass concentration of PCDD/PCDF.Part 3: Identification and quantification
• TCVN 4499-1988 Air in the zone of operration.Method of measuring unhealthy matters concentration using indicator tubes
• TCVN 254-2-2009 Solid mineral.Determination of phosphorus content.Part 2:Reduced molypdophosphate photometric method
• TCVN 7556-1-2005 Health care solid waste incinerators.Determination of the mass concentration of PCDDs/PCDFs.Part 1: Sampling
• TCVN 254-1-2009 Solid minersal.Determination of phosphorus content.Part 1:Gravimetric method

CEN - European Committee for Standardization, Measure the temperature inside an object

• EN ISO 8178-2:1996 Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 2: Measurement of Gaseous and Particulate Exhaust Emissions at Site
• EN ISO 2812-5:2018 Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method
• EN 16966:2018 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration@ surface area concentration and mass concentration
• EN ISO 14505-2:2006 Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature

NO-SN, Measure the temperature inside an object

• NS 9425-3-2003 Oceanography - Part 3: Measurement of sea temperature and salinity

GM Europe, Measure the temperature inside an object

• GME R-6Y-1-2003 Temperature Measurement of Electrical Units in the Engine Compartment under Simulated Customer Conditions

GOSTR, Measure the temperature inside an object

• GOST R ISO 12219-6-2020 Interior air of road vehicles. Part 6. Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature. Small chamber method
• GOST R 8.982-2019 State system for ensuring the uniformity of measurements. Standard reference data. Titanium alloys of VT Brend. Speed of sound, relative temperature expansion, density and Young's modulus in the temperature range from 20 °С to 800 °С
• GOST R 8.987-2020 State system for ensuriug the uniformity of measurements. Standard reference data. Chlorobenzene. Thermophysical properties (density, heat capacity, enthalpy, entropy, speed of sound, thermal conductivity and viscosity coefficients) over a temperature ran
• GOST 8.018-2018 The State system for ensuring the uniformity of measurements. State verification schedule for means of LTEC measurements of solids from 0,01х10 -6 to 100х10 -6 К -1 substance in temperature range from 90 to 3000 K
• GOST R 8.986-2020 State system for ensuring the uniformity of measurements. Standard reference data. Chlorobenzene. Thermophysical properties (density, heat capacity, enthalpy, entropy, speed of sound, thermal conductivity and viscosity coefficients)over a temperature ra
• GOST R 8.947-2018 State system for ensuring the uniformity of measurements. Standard reference data. n-Undecane. Thermophysical properties (density, heat capacity, enthalpy, entropy, sound velocity, thermal conductivity and viscosity coefficients) for the temperature range
• GOST R 8.951-2018 State system for ensuring the uniformity of measurements. Standard reference data. n-Dodecane. Thermophysical properties (density, heat capacity, enthalpy, entropy, sound velocity, thermal conductivity and viscosity coefficients) for the temperature range
• GOST R ISO 16000-34-2020 Indoor air. Part 34. Strategies for the measurement of airborne particles

RO-ASRO, Measure the temperature inside an object

• STAS 7653/2-1977 ROLLING BEARINGS Methods for measuring the interna) clearance
• STAS SR 13397-1997 Air quality Volumetric activity determination of polonium 218, lead 214, bismut 214 and lead 212

IT-UNI, Measure the temperature inside an object

• UNI EN ISO 20049-1:2021 Solid biofuels - Determination of self-heating of pelletized biofuels - Part 1: Isothermal calorimetry
• UNI EN ISO 80601-2-56:2021 Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement

UY-UNIT, Measure the temperature inside an object

• UNIT 648-1981

ES-AENOR, Measure the temperature inside an object

• UNE 83-205-1985
• UNE 83-206-1985

国家能源局, Measure the temperature inside an object

• NB/SH/T 0901-2015 Determination of glass transition temperature of mineral oils by differential scanning calorimetry

TR-TSE, Measure the temperature inside an object

• TS 3417-1979 MEASUREMENT OP FLUID PLOW IN CLOSED CONDUITS - VELOCITY AREA METHOD USING PITOT STATIC TUBES
• TS 729-1969 DETERMINATION OF THE YIELDS OF TAR, WATER, GAS AND COKE RESIDUE BY LOW TEMPERATURE DISTILLATION OF BROWN COAL AND LIGNITE

BE-NBN, Measure the temperature inside an object

• NBN M 02-002-1975 Solid minerai fuels - Determination of the bulk density of coke in a large container
• NBN M 02-001-1975 Solid minerai fuels - Determination of the bulk density of coke in a small container
• NBN-HD 021.7-1994
• NBN T 63-109-1982 Surface active agents - Washing powders - Determination of apparent density-Method by measuring the mass of a given volume

(U.S.) Telecommunications Industries Association , Measure the temperature inside an object

• TIA-455-71A-1999 FOTP-71 Procedure to Measure Temperature- Shock Effects on Fiber Optic Components

American National Standards Institute （ANSI), Measure the temperature inside an object

• ANSI/TIA-455-71-A-1999 Procedure to Measure Temperature-Shock Effects on Fiber Optic Components
• ANSI/TIA/EIA 455-71-A-1999 Procedure to Measure Temperature-Shock Effects on Fiber Optic Components
• ANSI/ADA 163-2018 Dental Furnace – Part 1: Test Method for Temperature Measurement with Separate Thermocouple

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Measure the temperature inside an object

• ASHRAE OR-05-5-1-2005 An Integrated Zonal Model for Predicting Indoor Airflow, Temperature, and VOC Distributions

Society of Automotive Engineers (SAE), Measure the temperature inside an object

• SAE J1235-1986 Measuring and Reporting the Internal Leakage of a Hydraulic fluid power Valve
• SAE J1235-2023 Measuring and Reporting the Internal Leakage of a Hydraulic Fluid Power Valve

SAE - SAE International, Measure the temperature inside an object

• SAE J1235-2015 Measuring and Reporting the Internal Leakage of a Hydraulic Fluid Power Valve
• SAE J1235-1978 Measuring and Reporting the Internal Leakage of a Hydraulic Fluid Power Valve@ Recommended Practice

Instrument Society of America (ISA), Measure the temperature inside an object

• ISA 71.01-1985 Environmental Conditions for Process Measurement and Control Systems: Temperature and Humidity

CH-SNV, Measure the temperature inside an object

• SN EN ISO 20049-1:2020 Solid biofuels - Determination of self-heating of pelletized biofuels - Part 1: Isothermal calorimetry (ISO 20049-1:2020)

PL-PKN, Measure the temperature inside an object

• PN-EN ISO 20049-1-2020-11 E Solid biofuels -- Determination of self-heating of pelletized biofuels -- Part 1: Isothermal calorimetry (ISO 20049-1:2020)
• PN M42068-1989 Industrial automatics nd measurements emperatur? controller with directly ontinous action for internal- combustion engine e?uirements and tests

Professional Standard - Light Industry, Measure the temperature inside an object

• QB/T 3736-1999 Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps

SE-SIS, Measure the temperature inside an object

• SIS SS 18 71 62-1984 Solid mineral fuels- Detrmination of phosphorus content - Reduced molybdophosphate photometric method

GM North America, Measure the temperature inside an object

• GM GMP.TES.025-2003 Thermoplastic Elastomer - Styrenic Block Copolymer, Shore A80, Interior/Exterior, Integrally Colored
• GM GMN6704-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A60, Interior, Integrally Colored
• GM GMN7303-2002 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A85, Interior/Exterior
• GM GMN7396-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A85, Interior/Exterior
• GM GMP.TES.026-2003 Thermoplastic Elastomer - Styrenic Block Copolymer, Shore A90, Interior/Exterior
• GM GMN8098-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore D38, Interior
• GM GMP.TES.009-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A86, 105 MPa Flexural Modulus, Interior, Paintable

Natural Gas Processor's Association (NGPA), Measure the temperature inside an object

• GPA RR-62-1982 Water-Hydrocarbon Liquid-Liquid-Vapor Equilibrium Measurements to 530 Degrees F

AT-ON, Measure the temperature inside an object

• ONORM M 7535-5-1997 Testing of waste gases of furnace Systems - Measuring equipment for the determination of the combustion temperature of gases - Requirements, testing, marking of conformity
• ONORM EN 20140-10-1993 Acoustics - Measurement of sound insulation in buildings and of building elements - Laboratory measurement of airborne sound insulation of small building elements

国家质量监督检验检疫总局, Measure the temperature inside an object

• SN/T 4747.1-2017 Determination of macrolide drug residues in imported and exported food animals Radioreceptor analysis method
• SN/T 4810-2017 Determination of beta-lactam drug residues in imported and exported food animals Radioreceptor analysis method

Professional Standard - Electron, Measure the temperature inside an object

• SJ/T 2658.13-2015 Measuring method for semiconductor infrared-emitting diode.Part 13: Temperature coefficient for radiant power

TH-TISI, Measure the temperature inside an object

• TIS 14064.2-2009 Greenhouse gases.part 2: specificationwithguidanceattheprojectlevelforquantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements

NL-NEN, Measure the temperature inside an object

• NEN 6311-1983 Vegetable and animal oils and fats Determination of the conventional mass by volume and of the relative density
• NEN 6311-1993 Vegetable and animal oils and fats. Determination of the conventional mass by volume and of the relative density

Occupational Health Standard of the People's Republic of China, Measure the temperature inside an object

• GBZ/T 189.10-2007 Measurement of Physical Agents in Workplace Part 10:Classification of Physical Workload

Others:   How to measure the surface temperature of an object, Object internal temperature measurement, Measure the temperature inside an object, How to measure internal temperature.