ZH
RU
ES

Drainage method true density

Drainage method true density, Total:499 items.

In the international standard classification, Drainage method true density involves: Construction materials, Conducting materials, Fuels, Refractories, Products of the chemical industry, Protection against fire, Coals, Insulating fluids, Organic chemicals, Textile fibres, Vacuum technology, Ceramics, Plastics, Rubber and plastics products, Thermodynamics and temperature measurements, Road engineering, Installations in buildings, Commercial vehicles, Water quality, Tyres, Electronic tubes, Radiation protection, Pulps, Particle size analysis. Sieving, Mining and quarrying, Pipeline components and pipelines, Waxes, bituminous materials and other petroleum products, Metrology and measurement in general, Analytical chemistry, Measurement of fluid flow, Power stations in general, Lifting equipment, Test conditions and procedures in general, Earthworks. Excavations. Foundation construction. Underground works, Road vehicles in general, Air quality, Soil quality. Pedology, Beverages, Cereals, pulses and derived products, Measurement of volume, mass, density, viscosity, Shipbuilding and marine structures in general, Non-ferrous metals, Testing of metals, Glass, Interior finishing, Sports equipment and facilities, Paints and varnishes, Construction industry, Quality, Cutting tools, Paint coating equipment, Road vehicle systems, Farming and forestry, Hydraulic energy engineering, External sewage systems, Agricultural machines, implements and equipment, Equipment for the rubber and plastics industries, Nuclear energy engineering, Welding, brazing and soldering.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Drainage method true density

GB/T 9966.3-2020 Test methods for natural stone—Part 3:Determination of water absorption,bulk density,true density and true porosity
GB/T 9966.3-2001 Test methods for natural facing stones Part 3: Test methods for bulk density,true density,true porosity and water absorption
GB/T 24203-2009 Carbon materials.Determination of the true density or true poroous.Boiling method
GB/T 6155-2008 Carbon materials-Determination of the true density or porosity
GB/T 5071-1997 Refractory materials--Determination of true density
GB/T 217-1996 Determination of true relative density of coal
GB/T 217-2008 Determination of true relative density of coal
GB/T 5071-2013 Refractory materials.Determination of true density
GB/T 4511.4-1984 Coke--Determination of true relative density
GB/T 6155-1985 Carbon materials--Determination of the true density
GB/T 4511.1-2008 Coke.Determination of true relative density apparent relative density and porosity
GB/T 17686-2008 Cotton fibre.Determination of linear density.Array method
GB/T 17686-1999 Cotton fibre--Determination of linear density--Array method
GB/T 8330-2008 Determination of specific gravity of ion exchange resins in wet state
GB/T 8330-1987 Method for the determination of true density of ion exchange resins in wet state
GB/T 208-2014 Test method for determinging cement density
GB/T 208-1994 Standard test method for cement density
GB/T 2997-2015 Test method for bulk density,apparent porosity and true porosity of dense shaped refractory products
GB/T 2997-2000 Test method for bulk density,apparent porosity and true porosity of dense shaped refractory products
GB/T 22594-2018 Water treatment chemicals.General rules for determination of density
GB/T 22594-2008 Water treatment reagent.General rules for the determination of density
GB/T 2998-2015 Test method for bulk density and true porosity of shaped heat insulating refractory products
GB/T 2998-2001 Shaped insulating refractory products-Determination of bulk density and true porosity
GB/T 18856.6-2008 Test methods for coal water mixture.Part 6:Determination of density
GB/T 18856.9-2002 Test methods for quality of coal water mixture--Part 9: Determination of the density of coal water mixture
GB/T 3256.2-1982 Chemical analysis of zirconium powder for electro-vacuum uses--The sulfosalicylic acid photometric method for determination of iron
GB/T 11970-1997 Test methods for bulk density, moisture and water absorbtion of aerated concrete
GB/T 4193-1984 Method for measuring the density of the fine wire and ribbon of tungsten and molybdenum used in electric light sources and vacuum tubes
GB/T 23561.2-2009 Methods for determining the physical and mechanical properties of coal and rock.Part 2:Methods for determining the true density of coal and rock
GB/T 5486.3-2001 Test methods of inorganic rigid thermal insulation--Density and moisture content and water absorption
GB/T 20396-2006 Identification of genuineness and varietal purity of three-line hybrid rice and its parents.DNA analysis method
GB/T 15231.1-1994 Test methods for the properties of glass fibre reinforced cement. The volume density, water content and glass fibre content

Professional Standard - Ferrous Metallurgy, Drainage method true density

YB 4091-1992 Method for measuring true density of carbon materials (distilled water boiling method)

UNKNOWN, Drainage method true density

YB 4091-92

Taiwan Provincial Standard of the People's Republic of China, Drainage method true density

CNS 11121-1984 Method for Determination of True Relative Density, Apparent Relative Density and Porosity of Coke
CNS 620-1998 Method for determination of true density of refractory materials
CNS 11272-1985 Method of Test for Density of Hydraulic Cement
CNS 7405-1981 Method of Test for Density of Paint, Varnish, Lacquer and Related Products
CNS 11777-1-2005 Method of test for moisture–density relations of soils（Modified effort method）
CNS 11777-2005 Method of test for moisture–density relations of soils（Standard effort method）
CNS 11777.1-2005 Method of test for moisture–density relations of soils（Modified effort method）
CNS 12494-1989 Method of Test for High Density Polyethylene Geomembrane for Sanitary Landfill
CNS 12877-1991 Method of Test for Crosslinked Polyethylene-Aluminum-Crosslinked Polyethylene Pipes for Water Works
CNS 9531-1982 Method of Test for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements

German Institute for Standardization, Drainage method true density

DIN EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
DIN 10459:2020-09 Hydrometric determination of density of milk
DIN EN 993-2/A1:2004 Methods of test for dense shaped refractory products - Part 2: Determination of true density; German version EN 993-2:1995/A1:2003
DIN EN 993-2:1995-04 Methods of test for dense shaped refractory products - Part 2: Determination of true density; German version EN 993-2:1995
DIN CEN/TS 17189:2018-08*DIN SPEC 78003:2018-08 Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry; German version CEN/TS 17189:2018
DIN EN 993-18:2002-11 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
DIN EN 1936:2007-02 Natural stone test method - Determination of real density and apparent density, and of total and open porosity; German version EN 1936:2006
DIN EN 12294:1999 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum; German version EN 12294:1999
DIN EN ISO 13056:2018-12 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011); German version EN ISO 13056:2018
DIN EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
DIN EN 993-17:1999-01 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
DIN EN ISO 13056:2018 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)
DIN EN 993-2/A1:2004-01 Methods of test for dense shaped refractory products - Part 2: Determination of true density; German version EN 993-2:1995/A1:2003
DIN EN 993-1:1995 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity; German version EN 993-1:1995
DIN EN 993-1:2019 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity
DIN EN 1055:1996 Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling; German version EN 1055:1996
DIN EN 993-1:2019-03 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity; German version EN 993-1:2018
DIN 25495:1991 Determination of density and total porosity of uranium dioxide pellets by the mercury displacement method
DIN EN 14617-1:2013-08 Agglomerated stone - Test methods - Part 1: Determination of apparent density and water absorption; German version EN 14617-1:2013

Professional Standard - Coal, Drainage method true density

MT 39-1987 Method for Determination of True Density of Rock
MT/T 39-1987 Method for Determination of True Density of Rock
MT/T 713-1997 Determination of true density for mine dust

Professional Standard - Petrochemical Industry, Drainage method true density

SH/T 0033-1990 Determination of true density of petroleum coke

Korean Agency for Technology and Standards (KATS), Drainage method true density

KS F 2397-2005 Standard test method for density of drained asphalt mixtures
KS F 2397-2013 Standard test method for density of drained asphalt mixtures
KS E ISO 1014:2002 Coke-Determination of true relative density, apparent relative density and porosity
KS B 6314-2-2002(2012) Positive-displacement oil-sealed rotary vacuum pumps－Measurement of volume rate of flow(pumping speed)
KS F 2495-2017 Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS L 5110-2021 Test method of density of hydraulic cement
KS F 2496-2012 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS F 2495-2012 Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS A ISO 5725-3-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 3：lntermediate measures of the precision of a standard measurement method
KS A 4513-2000 MEASURING METHODS OF B RADIOACTIVITY CONCENTRATION OF DRAIN WATER
KS A 4513-1985 MEASURING METHODS OF B RADIOACTIVITY CONCENTRATION OF DRAIN WATER
KS M ISO 5267-2:2002 Pulp－Determination of drainability－Part 2: “Canadian Stanard” freeness method
KS F 2495-2017(2022) Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS F 2496-2017 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS F 2496-2017(2022) Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS F 2593-2014 Standard test method for moisture density of soil
KS B ISO 3056:2005 Non-calibrated round steel link lifting chain and chain slings-Use and maintenance
KS B ISO 3056:2013 Non－calibrated round steel link lifting chain and chain slings－Use and maintenance
KS A ISO 5725-6-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 6：Use in practice of accuracy values
KS F 2459-2017 Testing methods for density, water content,absorption and compressive strength of cellular concrete
KS F 2459-1982 Testing methods for density, water content,absorption and compressive strength of cellular concrete
KS A 4513-1980(1995) MEASURING METHODS OF B RADIOACTIVITY CONCENTRATION OF DRAIN WATER
KS A ISO 5725-5-2012(2022) Accuracy(trueness and precision) of measurement methods and results－Part 5：Alternative methods for the determination of the precision of a standard measurement method
KS F 2459-2017(2022) Testing methods for density, water content,absorption and compressive strength of cellular concrete
KS F 2593-2019 Standard test method for moisture density of soil
KS F 2331-2007(2017) Testing method for moisture－density relations of soil－cement mixtures
KS F 2331-1982 Testing method for moisture－density relations of soil－cement mixtures
KS F 2331-2007 Testing method for moisture－density relations of soil－cement mixtures
KS F 2397-2005(2010) Standard test method for density of drained asphalt mixtures
KS F 2503-2019 Standard test method for density and water absorption of coarse aggregates
KS F 2518-2020 Standard test method for density and water absorption rate of natural stone
KS A ISO 5725-2:2021 Accuracy(trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
KS F 2346-2017 Testing method for unconsolidated, undrained strength of cohesive soils in triaxial compression
KS F 2346-1982 Testing method for unconsolidated, undrained strength of cohesive soils in triaxial compression
KS M ISO 5267-2:2017 Pulp－Determination of drainability－Part 2: “Canadian Stanard” freeness method
KS L 3114-1995 Testing method for apparent prosity,water absorption and specific gravity of fire beicks
KS F 2346-2022 Test method for unconsolidated undrained strength of cohesive soils in triaxial compression test
KS F 2346-2007 Testing method for unconsolidated, undrained strength of cohesive soils in triaxial compression

RU-GOST R, Drainage method true density

GOST 8066-1977 Black powders. Real density determination method
GOST 2409-2014 Refractories. Method for determination of bulk density, apparent and true porosity, water absorption
GOST 2409-1980 Refractory materials and articles. Method of water absorption, bulk density, apparent and true porosities determination
GOST R 56300-2014 Refractories and refractory raw materials. Methods of true density determination
GOST 32763-2014 Automobile roads of general use. Mineral powder. The method of determining the true density
GOST R 51431-1999 Juice products. Method for determination of relative density
GOST 33057-2014 Automobile roads of general use. Crushed stone and gravel from rocks. Definition of average and true density, porosity and water absorption
GOST 32411-2013 Commercial explosives. Methods of determination of electric copacitance, density and resistance to water emulsions
GOST 26798.1-1996 Oil-well cement. Test methods
GOST 26798.1-1985 Oil-well cements. Test methods of flowability, density, water-el: mination, thickening time and setting time
GOST 12730.0-1978 Concretes. General requirements for methods of determination of density, moisture content, water absorptions porosity and watertightness

Group Standards of the People's Republic of China, Drainage method true density

T/CAB 1038-2020 Determination of hydrogen storage density of hydrogenated liquid organic hydrogen carrier - Water displacement method
T/GZHG 002-2020 Nano-modified high-density polyethylene (MUHDPE) alloy drainage pipe
T/GZHG 013-2022 Nano-modified high-density polyethylene (MUHDPE) alloy drainage pipe
T/GZHG 030-2022 Anhydrous phosphogypsum modified high-density polyethylene double-wall corrugated drainage pipe
T/QAS 026-2021 Gravimetric method for determination of density of brine brine
T/CCAS 012-2019 Determining cement density by gas displacement method
T/GZHG 024-2022 Nano-modified high-density polyethylene (MUHDPE) double-peak reinforced buried drainage pipe
T/YNSX 010-2022 Large diameter high molecular weight high density polyethylene (HMWHDPE) plastic steel wound drainage pipe
T/CECS 10143-2021 High Molecular Weight High Density Polyethylene (HMWHDPE) Dual-Crest Winding Structure Wall Drain Pipe
T/CECS 10153-2021 Grooved connection high-density polyethylene (HDPE) pipes and fittings for building drainage
T/YNSX 10-2020 Large diameter high molecular weight high density polyethylene (HMWHDPE) plastic steel winding drainage pipe
T/GDC 84-2021 Nano-modified high-density polyethylene (MUHDPE) double-peak reinforced drainage pipe for buried
T/CSEE 0175-2021 Vacuum checking method and evaluation for sealing of water circuit within the winding of turbo generator
T/CECS 10144-2021 High molecular weight high-density polyethylene (HMWHDPE) hollow plastic-steel composite winding structure wall drainage pipe
T/YNSX 006-2022 High molecular weight high density polyethylene (HMWHDPE) double crest reinforced reinforced winding structure wall drainage pipe
T/CECS 994-2022 High molecular weight high density polyethylene (HMWHDPE) winding structure wall buried drainage pipeline engineering technical regulations
T/YNSX 007-2022 Large diameter high molecular weight high density polyethylene (HMWHDPE) hollow plastic steel composite winding structural wall drainage pipe
T/CEC 5001-2016 Technical regulations for testing sand and gravel compacted mass density bucket method in hydropower and water conservancy projects

Standard Association of Australia （SAA）, Drainage method true density

AS/NZS 2891.7.1:2015
AS 1774.6:2001 Refractories and refractory materials - Physical test methods - Determination of true density
AS 1774.6:2001(R2013)
AS 1289.5.8.5:1998(R2013)
AS 1289.5.8.6:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Assigned density of a Type B standard density block
AS 1289.5.8.8:1998(R2013)
AS ISO 10545.3:2020 Ceramic tiles, Method 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density
AS 1289.5.3.5:1997(R2013)
AS 1289.5.8.1:1995 Methods of testing soils for engineering purposes Method 5.8.1: Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture-density gauge - Direct transmission mode
AS 4459.3:1999 Methods of sampling and testing ceramic tiles - Determination of water absorption, apparent porosity, apparent relative density and bulk density
AS 1289.5.8.8:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using proportion of water
AS 1289.5.8.5:1998 Methods of testing soils for engineering purposes - Soils compaction and density tests - Nuclear surface moisture-density gauges - Density of a Type A or Type C standard density block
AS 1289.5.3.5:1997 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method
AS 1289.5.4.1:2007 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio
AS 1289.5.4.1:2007(R2016) Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio
AS 1289.5.8.9:1998(R2013)
AS 1289.5.8.7:1998(R2013)
AS 1289.5.8.1:2007 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture?Density gauge - Direct transmission mode
AS/NZS 2891.14.1.1:2013
AS/NZS 2891.14.1.2:2013
AS 1141.6.1:1995 Methods for sampling and testing aggregates Method 6.1: Particle density and water absorption of coarse aggregate - Weighing - in-waer method
AS 1141.6.1:2000 Methods for sampling and testing aggregates - Particle density and water absorption of coarse aggregate - Weighing-in-water method
AS/NZS 2891.14.4:2013
AS 1289.5.8.9:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using comparison against primary blocks
AS 1289.5.8.4:2009
AS 1289.5.8.4:2009/Amdt 1:2012
AS 1289.5.7.1:2006 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Hilf density ratio and Hilf moisture variation (rapid method)
AS 1141.5:1996 Methods for sampling and testing aggregates Method 5: Particle density and water absorption of fine aggregate
AS 1289.5.8.7:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using hydrogen content of components
AS 1141.6.2:1996 Methods for sampling and testing of aggregates - Particle density and water absorption of coarse aggregate - Pycnometer method
AS 1774.5:2001 Refractories and refractory materials - Physical test methods - The determination of density, porosity and water absorption
AS 1141.5:2000 Methods for sampling and testing aggregates - Particle density and water absorption of fine aggregate

American Society for Testing and Materials (ASTM), Drainage method true density

ASTM C1119-90(1995) Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
ASTM C1119-90(2004) Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
ASTM C1119-90(2004)e1 Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
ASTM C1119-90(1999) Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
ASTM C1119/C1119M-90(2015) Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
ASTM C1119/C1119M-90(2009)e1 Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
ASTM UOP766-91 Piece Density by Mercury Displacement
ASTM C188-16 Standard Test Method for Density of Hydraulic Cement
ASTM D2840-69 Method of Test for Average True Particle Density of Hollow Microspheres
ASTM C188-95 Standard Test Method for Density of Hydraulic Cement
ASTM C188-95(2003) Standard Test Method for Density of Hydraulic Cement
ASTM C188-09 Standard Test Method for Density of Hydraulic Cement
ASTM C188-17(2023) Standard Test Method for Density of Hydraulic Cement
ASTM C1214-19 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
ASTM D5004-89(2004)e1 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
ASTM D2638-21 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
ASTM D2638-91(2002) Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
ASTM D2638-91(1997) Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
ASTM D6752/D6752M-11 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D5004-89(1999) Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
ASTM D6857-03 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
ASTM D6857/D6857M-11 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
ASTM D6857/D6857M-17 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D6857-09 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
ASTM C1214M-94(2000) Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
ASTM C1214M-19 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
ASTM C188-14 Standard Test Method for Density of Hydraulic Cement
ASTM D2638-06 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
ASTM D2638-10 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
ASTM D5004-11 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
ASTM D6857/D6857M-18 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM C188-17 Standard Test Method for Density of Hydraulic Cement
ASTM C188-15 Standard Test Method for Density of Hydraulic Cement
ASTM D5004-89(2009) Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
ASTM D6752-02a Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752-02 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752/D6752M-17 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752/D6752M-18 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D2638-10(2015)e1 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
ASTM C830-00(2006)e1 Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
ASTM C830-00(2011) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
ASTM D6752-03e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752-03 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752-09 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D4189-07(2014) Standard Test Method for Silt Density Index 40;SDI41; of Water
ASTM C729-75(1995)e1 Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM D4189-07 Standard Test Method for Silt Density Index (SDI) of Water
ASTM C729-75(2000) Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM D418-82 Standard Methods of Testing Pile Yarn Floor Covering Construction
ASTM D4189-95(2002) Standard Test Method for Silt Density Index (SDI) of Water
ASTM D4189-95 Standard Test Method for Silt Density Index (SDI) of Water
ASTM C729-11(2016) Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM C1244-11 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
ASTM C1244M-11 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric)
ASTM PS132-01 Standard Provisional Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method (Withdrawn 2003)
ASTM D5931-20 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ASTM C1754/C1754M-12 Standard Test Method for Density and Void Content of Hardened Pervious Concrete
ASTM D6528-00 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils
ASTM F1815-11 Standard Test Methods for Saturated Hydraulic Conductivity, Water Retention, Porosity, and Bulk Density of Athletic Field Rootzones
ASTM D5931-13 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ASTM D558-96 Standard Test Methods for Moisture-Density Relations of Soil-Cement Mixtures
ASTM D558/D558M-19 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
ASTM PS131-01 Standard Provisional Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method (Withdrawn 2003)
ASTM D4767-04 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
ASTM D6528-07 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils
ASTM D5959-96(2003) Standard Test Method for Bulk Density of Level Paintbrush Filaments
ASTM D5959-12(2017) Standard Test Method for Bulk Density of Level Paintbrush Filaments
ASTM D854-06e1 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D854-14 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D7830/D7830M-14(2021)e1 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM D558-03 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
ASTM D558-11 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
ASTM D7370-09 Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion
ASTM C1688/C1688M-10 Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete
ASTM D7830/D7830M-14 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM D7830/D7830M-13 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM C1688/C1688M-12 Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete
ASTM C1688/C1688M-13 Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete
ASTM C1688/C1688M-14a Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete
ASTM D558-04 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
ASTM C729-11(2022) Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM C1688/C1688M-14 Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete
ASTM D6938-10 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM F2510/F2510M-07 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes
ASTM F2510/F2510M-07(2013) Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes
ASTM F1815-97 Standard Test Method for Saturated Hydraulic Conducitivity, Water Retention, Porosity, Particle Density, and Bulk Density of Putting Green and Sports Turf Root Zones
ASTM C1688/C1688M-08 Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete
ASTM D6938-08 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM D6938-17ae1 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM D6938-23 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM C830-00 Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
ASTM C830-00(2016) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
ASTM C830-00(2006) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
ASTM D6780/D6780M-12 Standard Test Method for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR)
ASTM C948-81(2023) Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete

CU-NC, Drainage method true density

NC 82-05-5-1984 Wines. Testing Methods. Determination of Relatiy and Absolute Density

ZA-SANS, Drainage method true density

SANS 5901:1978 True relative density of refractory materials (Pycnometer method)
SANS 5905:1978 Bulk density of dense refractory bricks (mercury balance method)
SANS 12294:1999 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum
SANS 5904:1979 Bulk density of refractory materials (mercury displacement method)

International Organization for Standardization (ISO), Drainage method true density

ISO 1014:1985 Coke; Determination of true relative density, apparent relative density and porosity
ISO 12154:2014 Determination of density by volumetric displacement - Skeleton density by gas pycnometry
ISO 8772:1991 High density polyethylene (PE-HD) pipes and fittings for buried drainage and sewerage systems; specifications
ISO/PRF 5725-3 Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate precision and alternative designs for collaborative studies
ISO 5725-3:2023 Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate precision and alternative designs for collaborative studies
ISO 13056:2011 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum
ISO/FDIS 5725-1 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
ISO/DIS 6640:2023 Measurement of density of water-sediment mixture using radiation transmission method
ISO/CD 6640 Determination of concentration or density of Suspended and deposited sediment in water bodies by Radiometric Methods
ISO 8770:1991 High-density polyethylene (PE-HD) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings; specifications
ISO 5725-2:2019 Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 17785-2:2018 Testing methods for pervious concrete - Part 2: Density and void content
ISO 13265:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
ISO 483:1988 Plastics; small enclosure for conditioning and testing using aqueous solutions to maintain relative humidity at constant value
ISO 16236:2013 Crop protection equipment - Test method for the determination of drainable volume and its concentration
ISO 13263:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength
ISO 6783:1982 Coarse aggregates for concrete; Determination of particle density and water absorption; Hydrostatic balance method

Professional Standard - Urban Construction, Drainage method true density

CJ/T 358-2010 High density polyethylene (HDPE) sewer pipes for trenchless installation
CJ/T 250-2007 High density polyethylene pipes and fittings for drainage inside buildings
CJ/T 250-2018 High-density polyethylene (HDPE) pipes and fittings for building drainage
CJ/T 3063-1997 Ultrasonic flowmeter for potable water and drain water (Transmission speed difference method)

Professional Standard - Light Industry, Drainage method true density

QB/T 1010-2015 Test method for true density of ceramic material and pigment

Association Francaise de Normalisation, Drainage method true density

NF EN 993-18:2002 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 18 : détermination de la masse volumique apparente des matériaux en grains par la méthode à l'eau sous vide
NF B40-340*NF EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18 : determination of bulk density of granular materials by the water method with vacuum
NF EN 12697-5:2018 Mélanges bitumineux - Méthodes d'essai - Partie 5 : masse volumique réelle (MVR)
NF T54-941:1999 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum.
NF P15-435:2021 Cement testing methods - Determination of density
NF B40-301*NF EN 993-2:1995 Methods of test for dense shaped refractory products. Part 2 : determination of true density.
NF EN 993-17:1999 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 17 : détermination de la masse volumique apparente des matériaux en grains par la méthode au mercure sous vide.
NF EN ISO 13056:2018 Systèmes de canalisations en plastique - Systèmes pour installation d'eau chaude et froide sous pression - Méthode d'essai de l'étanchéité sous vide
NF T54-941*NF EN ISO 13056:2018 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum
NF M07-096:2000 Émulsions eau dans gazole - Détermination dans la masse volumique - Méthode du tube en U-oscillant
NF B40-321*NF EN 993-1:2018 Methods of test for dense shaped refractory products - Part 1 : determination of bulk density, apparent porosity and true porosity
NF EN 1094-4:1995 Produits réfractaires isolants - Méthodes d'essai - Partie 4 : détermination de la masse volumique apparente et de la porosité réelle.
NF EN 13211:2001 Qualité de l'air - Émissions de sources fixes - Méthode manuelle de détermination de la concentration en mercure total
NF B40-321:1995 Methods of test for dense shaped refractory products. Part 1 : determination of bulk density, apparent porosity and true porosity.
NF P94-053:1991 Soils investigation and testing. Determination of density of fine soils. Cutting curb, mould and water immersion methods.
NF U26-033*NF ISO 16236:2013 Crop protection equipment - Test method for the determination of drainable volume and its concentration
NF T30-020-2*NF EN ISO 2811-2:2011 Paints and varnishes - Determination of density - Part 2 : immersed body (plummet) method
NF EN 1097-7:2022 Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 7 : détermination de la masse volumique réelle du filler - Méthode au picnomètre
NF P94-054:1991 Soils : investigation and testing. Determination of particle density. Pycnometer method.
NF P94-064:1993 Sols : reconnaissance et essais - Masse volumique sèche d'un élément de roche - Méthode par pesée hydrostatique.
NF EN ISO 2811-2:2011 Peintures et vernis - Détermination de la masse volumique - Partie 2 : méthode par immersion d'un corps (plongeur)

British Standards Institution (BSI), Drainage method true density

BS EN 993-2:1995 Methods of test for dense shaped refractory products. Determination of true density
BS ISO 12154:2014 Determination of density by volumetric displacement. Skeleton density by gas pycnometry
BS EN 993-18:2002 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the water method with vacuum
BS EN 993-17:1999 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the mercury method with vacuum
BS EN ISO 13056:2018 Plastics piping systems. Pressure systems for hot and cold water. Test method for leaktightness under vacuum
BS ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results. Use in practice of accuracy values
BS ISO 9631:2004 Rubber seals - Joint rings for pipelines for hot water supply, drainage and sewerage pipelines up to 110 °C - Specifications for the material
BS EN 14789:2005 Stationary source emissions - Determination of volume concentration of oxygen (O) - Reference method - Paramagnetism
BS ISO 17785-2:2018 Testing methods for pervious concrete - Density and void content
19/30329303 DC BS ISO 5725-4. Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method
BS EN 993-1:2018 Tracked Changes. Methods of test for dense shaped refractory products. Determination of bulk density, apparent porosity and true porosity
BS ISO 5725-3:2023 Accuracy (trueness and precision) of measurement methods and results. Intermediate precision and alternative designs for collaborative studies
BS EN 14617-1:2013 Agglomerated stone. Test methods. Determination of apparent density and water absorption
BS EN 14617-1:2005 Agglomerated stone - Test methods - Determination of apparent density and water absorption
BS ISO 16236:2013 Crop protection equipment. Test method for the determination of drainable volume and its concentration
17/30357750 DC BS ISO 17785-2. Testing methods for pervious concrete. Part 2. Density and void content - Part 2: Density and void content
BS 1902 Sec.3.4:1981 Methods of testing refractory materials. General and textural properties. Determination of true density (method 1902-304)
BS EN 1054:1996 Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints
BS EN 12509:2001 Timber Poles for Overhead Lines - Test Methods - Determination of Modulus of Elasticity, Bending Strength, Density and Moisture Content
BS ISO 13263:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength
BS ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results. Basic methods for the determination of repeatability and reproducibility of a standard measurement method

Danish Standards Foundation, Drainage method true density

DS/EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
DS/EN 993-2/A1:2004 Methods of test for dense shaped refractory products - Part 2: Determination of true density
DS/EN 993-2:1995 Methods of test for dense shaped refractory products - Part 2: Determination of true density
DS/EN 1936:2007 Natural stone test methods - Determination of real density and apparent density, and of total and open porosity
DS/EN 12294:2000 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum
DS/EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
DS/EN 993-1:1995 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity
DS/EN 772-4:1999 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
DS/ISO 16236:2013 Crop protection equipment - Test method for the determination of drainable volume and its concentration
DS 438.13:1984 Test methods for the structural use of brickwork. Determination of the density and water absorption of a brick
DS/ISO 7346-2:1988 Water quality — Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleo-stei, Cyprinidae)] - Part 2: Semi-static method
DS/ISO 7346-3:1988 Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleo-stei, Cyprinidae) ] - Part 3: Flow-through method

Lithuanian Standards Office , Drainage method true density

LST EN 993-18-2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
LST EN 993-2-2001 Methods of test for dense shaped refractory products - Part 2: Determination of true density
LST EN 993-2-2002/A1-2004 Methods of test for dense shaped refractory products - Part 2 : Determination of true density
LST EN 1936-2007 Natural stone test methods - Determination of real density and apparent density, and of total and open porosity
LST EN 12294-2002 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum
LST EN 993-17-2001 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
LST EN 993-1-2001 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity
LST EN 772-4-2000 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units

AENOR, Drainage method true density

UNE-EN 993-18:2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum.
UNE-EN 993-2/A1:2004 Methods of test for dense shaped refractory products - Part 2 : Determination of true density
UNE-EN 993-2:1996 Methods of test for dense shaped refractory products - Part 2: Determination of true density
UNE-EN 1936:2007 Natural stone test methods - Determination of real density and apparent density, and of total and open porosity
UNE 82009-4:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 4: BASIC METHODS FOR THE DETERMINATION OF THE TRUENESS OF A STANDARD MEASUREMENT METHOD.
UNE-EN 12294:2000 PLASTICS PIPING SYSTEMS. SYSTEMS FOR HOT AND COLD WATER. TEST METHOD FOR LEAKTIGHTNESS UNDER VACUUM
UNE 103301:1994 DETERMINATION OF A SOIL DENSITY. METHOD OF BALANCE WITH WATER BATH.
UNE 82009-5:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD.
UNE-EN 993-17:1999 METHODS OF TEST FOR DENSE SHAPED REFARACTORY PRODUCTS - PART 17: DETERMINATION OF BULK DENSITY OF GRANULAR MATERIALS BY THE MERCURY METHOD WITH VACCUM
UNE 82009-3:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 3: INTERMEDIATE MEASURES OF THE PRECISION OF A STANDARD MEASUREMENT METHOD.
UNE 82009-6:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 6: USE IN PRACTICE OF ACCURACY VALUES.
UNE 82009-1:1998 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 1: GENERAL PRINCIPLES AND DEFINITIONS.
UNE 40241-2:1975 PRECISIONS IN THE METHOD OF DETERMINING THE CONTENT IN CISTERNIC ACID OF HYDROLIZED OF WOOL BY MEANS OF ELECTROPHORESIS ON PAPER AND COLOURIMETRY.
UNE 80103:2013 Test methods of cements. Physical analysis. Actual density determination.
UNE-EN 993-1:1996 METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS. PART 1: DETERMINATION OF BULK DENSITY, APPARENT POROSITY AND TRUE POSORITY.
UNE 82009-2:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 2: BASIC METHOD FOR THE DETERMINATION OF REPEATABILITY AND REPRODUCIBILITY OF A STANDARD MEASUREMENT METHOD.
UNE 103900:2013 In situ determination of density and moisture content of soil and granular materials by nuclear methods: low depths.

Indonesia Standards, Drainage method true density

SNI 2531-2015 Metode uji densitas semen hidraulis
SNI 2813-2008
SNI 6886-2012 Metode uji penentuan hubungan kadar air dan densitas campuran tanah-semen
SNI 06-6989.30-2005 Water and wastewater - Part 30: Test methods of ammonia content with spectrophotometers by phenates
SNI 06-6989.31-2005 Water and waste water - Part 31: Test methods of phosphate content by spectrophotometers with acid ascorbic
SNI 06-6989.51-2005 Water and waste water - Part 51: Test methods of anionic surfactant content with spectrophotometers by methylene blue

轻工业部, Drainage method true density

QB 1010-1991 Method for determination of true density of pigments for daily ceramic materials

Professional Standard - Commodity Inspection, Drainage method true density

SN/T 0482-1995 High-speed determination of true relative density,apparentrelative density and porosity of coke for export
SN/T 4249-2015 Determination of moisture and basic density of wood chips for the pulp

ES-AENOR, Drainage method true density

Aerospace, Security and Defence Industries Association of Europe (ASD), Drainage method true density

ASD-STAN PREN 6018-1990 Aerospace Series Test Methods for Metallic Materials Determination of Density According to Displacement Method (Issue P 1)

SE-SIS, Drainage method true density

SIS SMS 2015-1967 Plastic pipes. Pressure and waste water pipes of hi.gh density polyethylene. Testing
SIS SS-ISO 9279:1992 Uranium dioxide pellets — Determination of density and total porosity — Mercury displacement method
SIS SS 13 21 24-1983 Concrete testing - Aggregate - Particle density (pycnometer method) and water absorption
SIS SS-ISO 9278:1992 Uranium dioxide pellets — Determination of density and amount of open and closed porosity — Boiling water method and penetration immersion method

未注明发布机构, Drainage method true density

BS EN 993-2:1995(2004) Methods oftest for dense shaped refractory products — Part 2 : Determination oftrue density
BS EN 1936:2006(2007) Natural stone test methods — Determination of real density and apparent density, and of total and open porosity
BS ISO 5725-6:1994(2002) Accuracy (trueness and precision) of measurement methods and results — Part 6 : Use in practice of accuracy values

The American Road & Transportation Builders Association, Drainage method true density

AASHTO T 133-1998 Standard Method of Test for Density of Hydraulic Cement
AASHTO T 133-2011 Standard Method of Test for Density of Hydraulic Cement
AASHTO T 133-2016 Standard Method of Test for Density of Hydraulic Cement
AASHTO T 331-2010 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
AASHTO T 331-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
AASHTO T 331-2021 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
AASHTO T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
AASHTO T 134-2005(R2009) Standard Method of Test for Moisture-Density Relations of Soil-Cement Mixtures
AASHTO T 331-2008 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
AASHTO T 134-2005 Standard Method of Test for Moisture-Density Relations of Soil-Cement Mixtures
AASHTO T 271-1983 Standard Method of Test for Density of Plastic and Hardened Portland Cement Concrete In-Place by Nuclear Methods
AASHTO T 310-2010 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
AASHTO T 310-2013 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
AASHTO T 296-2010 Standard Method of Test for Unconsolidated, Undrained Compressive Strength of Cohesive Soils in Triaxial Compression

European Committee for Standardization (CEN), Drainage method true density

PD CEN/TS 17189:2018 Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry
EN 993-17:1998 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
EN 12294:1999 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum
EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
EN 772-4:1998 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
EN 993-2:1995 Methods of test for dense shaped refractory products - Part 2: Determination of true density
EN 12509:2001 Timber Poles for Overhead Lines - Test Methods - Determination of Modulus of Elasticity, Bending Strength, Density and Moisture Content
EN ISO 13263:2017 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
EN 1054:1995 Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints
EN 1437:2002 Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading

CZ-CSN, Drainage method true density

CSN 72 5010-1988 Determination of water absorptivity, apparent and true porosity, bulk density and apparent density solid density of fired ceramic materials and products

Professional Standard - Electron, Drainage method true density

SJ/T 10943-1996 Test method for granulometric distribution of alundum powder for vacuum tubes - Density balance method

工业和信息化部, Drainage method true density

SJ/T 10943-2020 Density balance method for determination of particle size distribution of corundum powder for electric vacuum devices

Professional Standard - Recommended Standards for Engineering Construction, Drainage method true density

CECS 282-2010 Technical regulations for building drainage high-density polyethylene (HDPE) pipeline engineering

AASHTO - American Association of State Highway and Transportation Officials, Drainage method true density

T 133-2011 Standard Method of Test for Density of Hydraulic Cement
T 133-2019 Standard Method of Test for Density of Hydraulic Cement
T 133-2016 Standard Method of Test for Density of Hydraulic Cement
T 331-2010 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 331-2008 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 133-1991 Standard Method of Test for Density of Hydraulic Cement (ASTM C188-89)
T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
T 331-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 134-2005 Standard Method of Test for Moisture-Density Relations of Soil-Cement Mixtures
T134-1993 Standard Method of Test for Moisture-Density Relations of Soil- Cement Mixtures
TP 69-2004 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method (ASTM Designation D: 6752-02a)
T 272-2018 Standard Method of Test for One-Point Method for Determining Maximum Dry Density and Optimum Moisture
T 272-2016 Standard Method of Test for One-Point Method for Determining Maximum Dry Density and Optimum Moisture
T 134-2003 Standard Method of Test for Moisture-Density Relations of Soil-Cement Mixtures (ASTM Designation: D 558-82)
T134-1995 Standard Method of Test for Moisture-Density Relations of Soil-Cement Mixtures (Twentieth Edition; ASTM D 558-82)
T 310-2013 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
T 310-2011 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
T 310-2010 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

YU-JUS, Drainage method true density

JUS B.H8.351-1987 Methods of analysis of coal andcoke. Determination of the true relative density, the apparent relative densi-ty and the p orosity of coke
JUS B.D8.312-1983 Refractories. Methods of fisical testing. Determination of the bulk deniity, apparent porosity and true porosity of dense shaped refractory products
JUS B.D8.302-1984 Refractories. Methods of fisical testing. Determination of true density refractorl products and raw materials

VN-TCVN, Drainage method true density

TCVN 6530-2-1999 Refractories.Methods of test.Part 2: Determination of true density
TCVN 6530-3-1999 Refractories.Methods of test.Part 3: Determination of bulk density, water absorption, apparent porosity and true porosity

Professional Standard - Building Materials, Drainage method true density

JC/T 551-1994 Toilet low water tank accessories - drain valve seal and life test method

PT-IPQ, Drainage method true density

NP EN 12294-2002 Plastics piping systems Systems for hot and cold water Test method for leaktightness under vacuum
NP 3290-1988 Methods of testing windows Water tightness test under static pressure

IN-BIS, Drainage method true density

ES-UNE, Drainage method true density

UNE-CEN/TS 17189:2018 Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN ISO 13056:2019 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)
UNE-EN 993-1:2018 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity (Endorsed by Asociación Española de Normalización in January of 2019.)

TR-TSE, Drainage method true density

TS 3625-1981 METHODS FOR THE ANALYSIS OF WATER DETERMINATION OF RELATIVE DENSITY

PL-PKN, Drainage method true density

PN H04185-1992 Refractory materials. Determination of bulk density, apparent porosity, true porosity and water absorbability

国家市场监督管理总局、中国国家标准化管理委员会, Drainage method true density

GB/T 39382-2020 Thermoplastics piping systems for soil and waste discharge inside buildings—Test method for airtightness of joints

Professional Standard - Non-ferrous Metal, Drainage method true density

YS/T 63.8-2023 Carbonaceous materials used for the production of aluminium — Part 8:Determination of truth density — Pyknometric method
YS/T 63.9-2006 Carbonaceous materials used in the production of aluminium. Part 9:Determination of truth density by helium pyknometry method
YS/T 63.9-2012 Carbonaceous materials used in the production of aluminium.Part 9:Determination of truth density by helium pyknometry method
YS/T 587.9-2006 Calcined coke for prebaked blocks. Testing methods. Part 9: Determination of real density
YS/T 574.2-2006 Zirconium Powder Chemical Analysis Method for Electric Vacuum Determination of Iron with Sulfosalicylic Acid Spectrophotometry
YS/T 574.2-2009 Methods for chemical analysis of zirconium powder for electro-vacuum uses.The sulfosalicylic acid spectrophotometric method for determination of iron

Professional Standard - Electricity, Drainage method true density

DL 5270-2012 Test code for density and moisture by nuclear methods
DL/T 5270-2020 Density and water content test procedures by nuclear method

Japanese Industrial Standards Committee (JISC), Drainage method true density

JIS A 1109:2020 Methods of test for density and water absorption of fine aggregates
JIS A 1110:2020 Methods of test for density and water absorption of coarse aggregates
JIS A 1110:1999 Methods of test for density and water absorption of coarse aggregates
JIS A 1110:2006 Methods of test for density and water absorption of coarse aggregates
JIS A 1109:1999 Methods of test for density and water absorption of fine aggregates
JIS A 1109:2006 Methods of test for density and water absorption of fine aggregates

CEN - European Committee for Standardization, Drainage method true density

EN ISO 13056:2018 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum

KR-KS, Drainage method true density

KS F 2331-2022 Test method for moisture-density relations of soil cement mixtures
KS M ISO 3993-2003(2023)
KS A ISO 5725-2-2021 Accuracy(trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
KS M ISO 5267-2-2017 Pulp－Determination of drainability－Part 2: “Canadian Stanard” freeness method

Professional Standard - Agriculture, Drainage method true density

SN/T 3402-2012 DNA Analysis Method for Authenticity and Purity Identification of Two-line Rice Varieties

BELST, Drainage method true density

STB GOST R 51431-2006 Fruit and vegetable juices. Method for determination of relative density

Hunan Provincial Standard of the People's Republic of China, Drainage method true density

DB43/T 860-2014 SSR Molecular Marker Method for Authenticity and Purity Identification of Hybrid Rice Seeds

American National Standards Institute （ANSI), Drainage method true density

ANSI/ASTM D5931:1998 Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ANSI/ASTM F1815:2011 Test Methods for Saturated Hydraulic Conductivity, Water Retention, Porosity, and Bulk Density of Athletic Field Rootzones
ANSI/ASTM F2510/F 2510M:2007 Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes

CO-ICONTEC, Drainage method true density

ICONTEC 221-1992

FI-SFS, Drainage method true density

NZ-SNZ, Drainage method true density

NZS 4402.5.1.4:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.4: Immersion in Water Method
NZS 4402.5.1.5:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.5: Water Displacement Method
AS/NZS 1580.202.2:1995 Paints and Related Materials - Methods of Test Method 202.2: Density of Water-Dispersed Paints Subject to Foaming

RO-ASRO, Drainage method true density

STAS 11388/6-1984 CABLES AND CORDS METHODS OF TEST Methods for determining the density, water absorption tests and shrinkage test

Professional Standard - Machinery, Drainage method true density

JB/T 7999-2001 Testing methods for the volume density,general porosity and water absorption of bonded abrasive products
JB/T 7999-2013 Bonded abrasive products.Testing methods for the volume density, general porosity and water absorption

VE-FONDONORMA, Drainage method true density

COVENIN 737-1976

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Drainage method true density

GB/T 35160.1-2017 Test methods for agglomerated stone—Part 1：Determination of apparent density and water absorption

National Metrological Verification Regulations of the People's Republic of China, Drainage method true density

JJG(烟草) 32-2023
JJG(烟草)32-2023 Verification Regulation of Cigarette Packet Seal Tester—Method of Pumping-water Immersion

Association of German Mechanical Engineers, Drainage method true density

DVS 2207-2-1986 "Welding of thermoplastic polymers, PE-HD (polyethylene of high density); heated tool butt welding; pipes and pipeline parts for sewers and sewage discharges"

US-FCR, Drainage method true density

FCR COE CRD-C 653-95-1995 HANDBOOK FOR CONCRETE AND CEMENT STANDARD TEST METHOD FOR DETERMINATION OF MOISTURE-DENSITY RELATION OF SOILS

TH-TISI, Drainage method true density

TIS 1743-1999 Coarse aggregates for concrete.determination of particle density and water absorption.hydrostatic balance method

Guangdong Provincial Standard of the People's Republic of China, Drainage method true density

DB44/T 1100.1-2012 Test methods for artificial stone: Part 1 Determination of bulk density and water absorption

GOSTR, Drainage method true density

GOST 12730.0-2020 Concretes. General requirements for methods of determination of density, moisture content, water absorption, porosity and water tightness