ZH
RU
ES

Determination method of foam gold

Determination method of foam gold, Total:349 items.

In the international standard classification, Determination method of foam gold involves: Cellular materials, Beverages, Rubber and plastics products, Analytical chemistry, Plastics, Construction materials, Lubricants, industrial oils and related products, Road engineering, Rubber, Packaging and distribution of goods in general, Fuels, Surface treatment and coating, Paint coating processes, Chipless working equipment, Elements of buildings, Structures of buildings, Shipbuilding and marine structures in general, Protection against fire, Measurement of volume, mass, density, viscosity, Products of the chemical industry, Materials for aerospace construction, Products of the textile industry, Coals, Packaging materials and accessories, Metalliferous minerals, Mechanical testing, Raw materials for rubber and plastics, Non-textile floor coverings, Optoelectronics. Laser equipment, Pesticides and other agrochemicals, Non-ferrous metals, Air quality, Paints and varnishes, Lamps and related equipment, Physics. Chemistry, Testing of metals.

RU-GOST R, Determination method of foam gold

GOST 24616-2017 Plastics cellular and foam rubber. Method for determination of hardness
GOST 12852.5-1977 Cellular concrete. Method of steam-permeafility coefficient determination
GOST 20990-2017 Cellular flexible plastics. Method for determination of fatigne at cyclic compression
GOST 23409.26-1978 Fluid self-hardening sand mixtures. Method for determination of surfactants solutions foaming ability and stability of foam
GOST 20870-2017 Rigid cellular plastics. Method for determination of the rate of passage of water vapour
GOST 20989-1975 Rigid cellular plastics. Method for determining dimension stability
GOST 18268-2017 Flexible cellular plastics. Method for determination of specific compression set
GOST 20869-1975 Rigid cellular plastics. Method for determination of water absorption
GOST 24434-1980 Laminated wall and roof panels with plastic foam thermal insulation. Plastic foams. Method of determining shrinkage
GOST 32480-2013 Laundry detergents. Method for measuring the foaming in washing machine
GOST 20989-2017 Rigid cellular plastics. Method for determining of demension stability
GOST 18336-1973 Rigid cellular plastics. Method of test for modulus of elasticity
GOST R 50588-1993 Feaming agents for fire extinguishing. General technical requirements and test methods
GOST R 50588-2012 Foaming agents for fire extinguishing. General technical requirements and test methods
GOST 409-1977 Plastics cellular and rubber cellular. Method for determination of apparent density
GOST 24616-1981 Plastics celluar and foam rubber. Method for determination of hardness
GOST 25015-1981 Plastics celluar and foam rubber. Method for measuring linear dimensions
GOST R 50800-1995 Automatic fire fighting foam systems. General technical requirements. Test methods
GOST 18268-1972 Flexible cellular plastics. Method of test for spesific compression set
GOST 20990-1975 Flexible cellular foams. Method for determination of fatigne at cyclic compression
GOST R 59635-2021 Fire, equipment. Combs to foam generators. General technical requirements. Test methods
GOST R 51114-1997 Automatic water and foam fire fighting systems. Feeder. General technical requirements. Test methods
GOST 3522-1981 Optical glass. Method for determination of bubbles
GOST R 51737-2001 Automatic water and foam fire fighting systems. Sectional tubing couplings. General technical requirements. Methods of tests
GOST 23404-1986 Lightweight enclosure panels with foam plastic thermal insulation. Method of determining modulus of elasticity and shear modulus of foam plastic
GOST 17537-1972 Paint materials. Methods for the determination of the conten of volatile and non-volatile matters, hard and film-forming materials
GOST R 52904-2007 Laundry detergents. Method for determination of the foaming in washing machine
GOST 23198-1994 Electric lamps. Methods of measuring spectral and colour characteristics
GOST 23198-1978 Discharge lamps. Methods of measuring spectral and colour characteristics
GOST 12562.1-1982 Alloys gold-platinum. Method for the determination of gold
GOST 12563.1-1983 Gold-palladium alloys. Method for the determination of gold

American Society for Testing and Materials (ASTM), Determination method of foam gold

ASTM D5113-97(2021) Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam
ASTM D7132-19 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam
ASTM D1545-76(1989)e1 Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM D1545-13(2017) Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM C240-08(2012) Standard Test Methods of Testing Cellular Glass Insulation Block
ASTM D3576-04 Standard Test Method for Cell Size of Rigid Cellular Plastics
ASTM D3576-04(2010) Standard Test Method for Cell Size of Rigid Cellular Plastics
ASTM D7132-05 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam
ASTM D7132-13 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam
ASTM D7132-14 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam
ASTM D1622-98 Standard Test Method for Apparent Density of Rigid Cellular Plastics
ASTM F1957-99(2004) Standard Test Method for Composite Foam Hardness-Durometer Hardness
ASTM D3576-98 Standard Test Method for Cell Size of Rigid Cellular Plastics
ASTM F1957-99(2011) Standard Test Method for Composite Foam Hardness-Durometer Hardness
ASTM D1564-71e1 Standard Methods of Testing Slab Flexible Urethane Foam
ASTM D5113-97(2016) Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam
ASTM F1994-99(2005) Standard Test Method for Shipboard Fixed Foam Firefighting Systems
ASTM F1994-99 Standard Test Method for Shipboard Fixed Foam Firefighting Systems
ASTM F1994-99(2019)e1 Standard Test Method for Shipboard Fixed Foam Firefighting Systems
ASTM F1994-99(2023) Standard Test Method for Shipboard Fixed Foam Firefighting Systems
ASTM F1957-99 Standard Test Method for Composite Foam Hardness-Durometer Hardness
ASTM F1957-99(2017) Standard Test Method for Composite Foam Hardness-Durometer Hardness
ASTM C1536-02 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
ASTM C1303/C1303M-22 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
ASTM C1806-21 Standard Test Method for Measuring the Flow Rate of Aerosol Foam Sealants
ASTM D4168-95(2015) Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials
ASTM C1303-08 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
ASTM C1303-08e1 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
ASTM C1303-09a Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
ASTM C1303-09 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
ASTM C796/C796M-19 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
ASTM D5113-97 Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam
ASTM D5113-97(2005) Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam
ASTM C1536-03 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
ASTM C1536-10 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
ASTM C1303/C1303M-12 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
ASTM C1536-18 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
ASTM C1303/C1303M-19 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
ASTM C1536-19 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
ASTM C1303/C1303M-10 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
ASTM C1303/C1303M-11 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
ASTM C1303/C1303M-11a Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
ASTM C1303/C1303M-14 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
ASTM C1806-14 Standard Test Method for Measuring the Flow Rate of Aerosol Foam Sealants
ASTM C1303/C1303M-15 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
ASTM F2096-11 Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test)
ASTM C1303-07 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
ASTM C1643-14(2020) Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
ASTM F387-93 Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
ASTM F387-02 Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
ASTM F387-17(2022) Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
ASTM D5113-97(2011)e1 Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam
ASTM F387-02(2008) Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
ASTM F387-11 Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
ASTM C1643-08 Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
ASTM C1643-14 Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
ASTM B926-03 Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
ASTM B926-09 Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
ASTM D8142-23 Standard Test Method for Determining Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation using Micro-Scale Environmental Test Chambers
ASTM D8142-17 Standard Test Method for Determining Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation using Micro-Scale Environmental Test Chambers
ASTM D8142-17e1 Standard Test Method for Determining Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation using Micro-Scale Environmental Test Chambers
ASTM D3078-94 Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
ASTM D3078-02 Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
ASTM D3078-02(2008) Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
ASTM D3078-02(2008)e1 Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission

RO-ASRO, Determination method of foam gold

STAS SR 13355-2-1997 Beer. Analysis method. Determination of foam
STAS SR ISO 1183:1994 Plastics - Methods for determining the density and relative density of non-cellular plastics

Taiwan Provincial Standard of the People's Republic of China, Determination method of foam gold

CNS 7407-1981 Determination of Apparent Density of Cellular Rubbers and Plastics
CNS 7406-1981 Determination of Linear Dimensions of Rigid Cellular Plastics
CNS 7408-1981 Compression Test for Rigic Materials of Cellular Plastics
CNS 7409-1981 Determination of Shear Strength of Rigid Cellular Plastics

Japanese Industrial Standards Committee (JISC), Determination method of foam gold

JIS K 7222:1985 Methods for determining the apparent density of rigid cellular plastics
JIS K 7221:1995 Testing method for flexural properties of rigid cellular plastics
JIS K 7112:1999 Plastics -- Methods of determining the density and relative density of non-cellular plastics
JIS K 7220:1995 Testing method for compressive properties of rigid cellular plastics
JIS L 1066:1963 Methods of testing for polyurethane foam laminated fabrics
JIS K 7112-2:2023 Plastics -- Methods for determining the density of non-cellular plastics -- Part 2: Density gradient column method
JIS K 7112-1:2023 Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
JIS A 1485:2006 Method for measuring halocarbons in foamed plastics for thermal insulation -- Thermal extraction/gas chromatography
JIS M 8125:1997 Method for determination of copper in blister copper
JIS M 8125 AMD 1:2016 Method for determination of copper in blister copper (Amendment 1)

Professional Standard - Coal, Determination method of foam gold

MT/T 764-1997 Testing method for performance of form dedusting agent in coal mine

未注明发布机构, Determination method of foam gold

DIN EN ISO 7214:2000 Polyethylene foams – Test method
BS EN ISO 1183-3:1999(2003) Plastics — Methods for determining the density of non - cellular plastics — Part 3 : Gas pyknometer method
BS EN 14371:2004(2009) Surface active agents — Determination of foamability and degree of foamability — Circulation test method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Determination method of foam gold

GB/T 12579-2002 Determination of foaming characteristics of lubricating oils
GB/T 8811-2008 Rigid cellular plastics.Test method for dimensionsl stability
GB/T 8811-1988 Test method for dimensional stability of rigid cellular plastics
GB/T 10807-2006 Flexible cellular polymeric materials - Determination of hardness (indentation technique)
GB/T 42985-2023 Method for detecting biobased content in biomass-based foam materials
GB/T 6670-2008 Flexible cellular polymeric materials.Determination of resilience by ball rebound
GB/T 1033.2-2010 Plastics.Methods for determining the density of non-cellular plastics.Part 2:Density gradient column method
GB/T 1033.3-2010 Plastics.Methods for determining the density of non-cellular plastics.Part 3:Gas pyknometer method
GB/T 1033.1-2008 Plastics.Methods for determining density of non-celluar plastics.Part1:Immersion method,liquid pyknometer method and titration method
GB/T 28137-2011 Testing method of persistent foaming for pesticides
GB/T 15749-2008 Measuring method in quantitative metallography

Standard Association of Australia （SAA）, Determination method of foam gold

AS 2498.8:1991 Methods of testing rigid cellular plastics - Determination of water absorption
AS 2498.6:1993 Methods of testing rigid cellular plastics - Determination of dimensional stability
AS 2498.2:1993 Methods of testing rigid cellular plastics - Determination of linear dimensions
AS 2498.3:1993 Methods of testing rigid cellular plastics - Determination of compressive stress
AS 2498.4:1993 Methods of testing rigid cellular plastics - Determination of cross-breaking strength
AS 2498.0:1993 Methods of testing rigid cellular plastics - General introduction and list of methods
AS 2498.5:1993 Methods of testing rigid cellular plastics - Determination of water vapour transmission rate
AS 2498.1:1993 Methods of testing rigid cellular plastics - Sampling and conditioning
AS 2498.7:1993 Methods of testing rigid cellular plastics - Determination of volume percentage of open and closed cells

AR-IRAM, Determination method of foam gold

IRAM 25 583-1957

Group Standards of the People's Republic of China, Determination method of foam gold

T/HNCAA 044-2023 Standard for foaming quality and testing methods of foamed asphalt
T/ZSHG 015-2022 Test method for foam aerosol products
T/CPPIA 6-2021 Determination of Hexabromocyclododecane in Expanded Polystyrene and Extruded Polystyrene--Gas Chromatography-Mass Spectrometry
T/CSTM 00865-2023 Defoamer for metalworking fluid industry—Test method for defoaming and
T/JXTX 0003-2021 Method for chemical analysis of copper concentrates-Determination of gold content -Plastic foam adsorption- Flame atomic absorption spectrometry method

FI-SFS, Determination method of foam gold

SFS-ISO 7214 E:1986 This standard is approved in English

German Institute for Standardization, Determination method of foam gold

DIN EN ISO 7214:2012-07 Cellular plastics - Polyethylene - Methods of test (ISO 7214:2012); German version EN ISO 7214:2012
DIN EN 13523-20:2020 Coil coated metals - Test methods - Part 20: Foam adhesion
DIN EN 13523-20:2020-08 Coil coated metals - Test methods - Part 20: Foam adhesion; German version EN 13523-20:2020
DIN EN ISO 1183-1:2019-09 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019, Corrected version 2019-05); German version EN ISO 1183-1:2019
DIN EN ISO 2439:2009 Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008); English version of DIN EN ISO 2439:2009-05
DIN EN ISO 1183-3:2000 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999); German version EN ISO 1183-3:1999
DIN EN ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004); German version EN ISO 1183-2:2004
DIN EN ISO 1183-3:2000-05 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999); German version EN ISO 1183-3:1999
DIN EN ISO 1183-2:2019-06 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2019); German version EN ISO 1183-2:2019
DIN EN 13523-20:2012 Coil coated metals - Test methods - Part 20: Foam adhesion; German version EN 13523-20:2011
DIN EN 2667-6:2003 Aerospace series - Non-metallic materials; Foaming structural adhesives; Test methods - Part 6: Determination of water absorption; German and English version EN 2667-6:2001
DIN EN ISO 8307:2008 Flexible cellular polymeric materials - Determination of resilience by ball rebound (ISO 8307:2007); English version of DIN EN ISO 8307:2008-03
DIN EN 13565-1:2019 Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components
DIN EN 13565-1:2019-07 Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components; German version EN 13565-1:2019
DIN EN ISO 1183-2:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2019)
DIN 14493-100:2002 Fixed foam extinguishing systems - Part 100: Requirements and test methods for foam systems for low and medium expansion foam
DIN EN ISO 9054:2000-01 Cellular plastics, rigid - Test methods for self-skinned, high-density materials (ISO 9054:1990); German version EN ISO 9054:1999
DIN EN 13565-1:2008 Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components (includes Amendment A1:2007); German version EN 13565-1:2008-01
DIN EN ISO 1183-1:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019, Corrected version 2019-05)
DIN EN 17101:2018 Thermal insulation products for buildings - Methods of identification and test methods for one-component PU adhesive foam for External Thermal Insulation Composite Systems (ETICS)
DIN 53434:1985 Testing of rigid cellular plastics; determination of the water absorption of semi-finished and finished products by water immersion
DIN EN ISO 1183-1:2013 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012); German version EN ISO 1183-1:2012
DIN EN 17101:2018-11 Thermal insulation products for buildings - Methods of identification and test methods for one-component PU adhesive foam for External Thermal Insulation Composite Systems (ETICS); German version EN 17101:2018

Association Francaise de Normalisation, Determination method of foam gold

NF EN ISO 7214:2012 Plastiques alvéolaires - Polyéthylène - Méthodes d'essai
NF T37-001-20*NF EN 13523-20:2020 Coil coated metals - Test methods - Part 20 : foam adhesion
T73-413:1983 Surface active agents. Determination of foaming ability (foaming power), anti-foaming power and foam persistence. Bubbling method.
NF T51-037-2:2005 Plastics - Methods for determining the density of non-cellular plastics - Part 2 : density gradient column method.
NF T51-037-3*NF EN ISO 1183-3:1999 Plastics - Methods for determining the density of non-cellular plastics - Part 3 : gas pyknometer method
NF T51-037-2*NF EN ISO 1183-2:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 2 : density gradient column method
NF T56-134:2008 Flexible cellular polymeric materials - Determination of resilience by ball rebound.
NF T37-001-20:2012 Coil coated metals - Test methods - Part 20 : foam adhesion.
NF EN ISO 1183-3:1999 Plastiques - Méthodes pour déterminer la masse volumique des plastiques non alvéolaires - Partie 3 : méthode utilisant un pycnomètre à gaz
T73-412:1983 Surface active agents. Determination of foaming ability (foaming power), anti-foaming power and foam persistence. Recycling and fall method.
NF EN 13523-20:2020 Tôles prélaquées - Méthodes d'essai - Partie 20 : adhérence des mousses
NF T51-037-1*NF EN ISO 1183-1:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 1 : immersion method, liquid pycnometer method and titration method
NF L17-310-6*NF EN 2667-6:2002 Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 6 : determination of water absorption
NF T51-063:1971 Methods for determining the density and relative density (specific gravity) of plastics excluding cellular plastics.
NF S62-161*NF EN 13565-1:2019 Fixed firefighting systems - Foam systems - Part 1 : requirements and test methods for components
NF EN 13565-1:2019 Installations fixes de lutte contre l'incendie - Systèmes à émulseurs - Partie 1 : exigences et méthodes d'essais relatives aux composants
NF EN 13565-1/IN1:2008 Installations fixes de lutte contre l'incendie - Systèmes à émulseurs - Partie 1 : exigences et méthodes d'essai relatives aux composants
NF EN ISO 9054:1999 Plastiques alvéolaires rigides - Méthodes d'essai pour les produits à peau intégrée et à haute densité
NF T56-115*NF EN ISO 3385:2014 Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding
NF T56-115:1995 Flexible cellular polymeric materials. Determination of fatigue by constant-load pounding.
NF EN ISO 1183-1:2019 Plastiques - Méthodes de détermination de la masse volumique des plastiques non alvéolaires - Partie 1 : méthode par immersion, méthode du pycnomètre en milieu liquide et méthode par titrage
NF T51-037-1:2013 Plastics - Methods for determining the density of non-cellular plastics - Part 1: immersion method, liquid pyknometer method and titration method
NF P75-486*NF EN 17101:2018 Thermal insulation products for buildings - Methods of identification and test methods for one-component PU adhesive foam for External Thermal Insulation Composite Systems (ETICS)
NF EN 24003:1993 Matériaux en métal fritté perméable - Détermination de la dimension des pores - Méthode bulloscopique.

CZ-CSN, Determination method of foam gold

CSN 64 5464-1978 Cellulav plastics and cellular rubber atcrials. Laboratory method of test to ssess the horizontál burning haracleristics
CSN 56 0186 Cast.3-1981 Testing methods for beer. Part 3. Determination of foaming quality

British Standards Institution (BSI), Determination method of foam gold

BS 4443-7:1992+A1:2008 Methods of test for Flexible cellular materials — Part 7: Method 17. Determination of tear strength of flexible cellular material with an integral skin
BS EN ISO 1183-3:1999 Plastics - Methods for determining the density of non-cellular plastics - Gas pyknometer method
BS EN ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Density gradient column method
BS 2782-6 Methods 620A to 620D:1991 Methods of testing plastics. Dimensional properties. Determination of density and relative density of non-cellular plastics. Methods 620A to 620D:Determination of density and relative density of non-cellular plastics
BS EN 13523-20:2020 Coil coated metals. Test methods. Foam adhesion
BS EN 13523-20:2004 Coil coated metals. Test methods. Foam adhesion
BS EN 13523-20:2011 Coil coated metals. Test methods. Foam adhesion
BS EN 13523-20:2012 Coil coated metals. Test methods. Foam adhesion
BS 5946:1980 Method of test for determination of the punking behaviour of phenol-formaldehyde foam
BS EN ISO 1183-1:2019 Plastics. Methods for determining the density of non-cellular plastics. Immersion method, liquid pycnometer method and titration method
19/30394131 DC BS EN 13523-20. Coil coated metals. Test methods. Part 20. Foam adhesion
BS EN 2667-6:2002 Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Determination of water absorption
BS EN ISO 1183-1:2004 Plastics - Methods for determining the density of non-cellular plastics - Immersion method, liquid pyknometer method and titration method
BS EN ISO 1183-1:2012 Plastics. Methods for determining the density of non-cellular plastics. Immersion method, liquid pyknometer method and titration method
BS 7530-2:1995 Methods for froth flotation testing of hard coal - Evaluation of flotation characteristics
BS EN ISO 1183-2:2019 Tracked Changes. Plastics. Methods for determining the density of non-cellular plastics. Density gradient column method
BS EN 13565-1:2003+A1:2007 Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components
BS EN ISO 8307:2008 Flexible cellular polymeric materials - Determination of resilience by ball rebound
BS EN 13565-1:2003 Fixed firefighting systems - Foam systems - Part 1:Requirements and test methods for components
BS EN 13565-1:2019 Tracked Changes. Fixed firefighting systems. Foam systems. Part 1: Requirements and test methods for components
BS 4735:1974 Laboratory method of test for assessment of the horizontal burning characteristics of specimens no larger than 150 mm x 50 mm x 13 mm (nominal) of cellular plastics and cellular rubber materials when subjected to a small flame
BS EN 17101:2018 Thermal insulation products for buildings. Methods of identification and test methods for one-component PU adhesive foam for External Thermal Insulation Composite Systems (ETICS)
BS EN 14371:2004 Surface active agents - Determination of foamability and degree of foamability - Circulation test method
BS 4736:1985 Method for determination of dimensional changes of fabrics induced by cold-water immersion

Korean Agency for Technology and Standards (KATS), Determination method of foam gold

KS M 1080-2008 Determination of lead and cadmium in foam for impact absorption
KS M 3831-1997 TESTING METHOD FOR COMPRESSIVE PROPERTIES OF RIGID CELLULAR PLASTICS
KS M 3831-1987 TESTING METHOD FOR COMPRESSIVE PROPERTIES OF RIGID CELLULAR PLASTICS
KS M ISO 1183-2006(2011) Plastics－Methods for determining the density and relative density of non-cellular plastics
KS M ISO 3385:2002 Flexible cellular polymeric materials－Determination of fatigue by constant-load pounding
KS M ISO 3385:2017 Flexible cellular polymeric materials－Determination of fatigue by constant-load pounding
KS M ISO 1183-2:2014 Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
KS M ISO 2439-2012(2017) Flexible cellular polymeric materials－ Determination of hardness(indentation technique)
KS M ISO 2439-2012(2022) Flexible cellular polymeric materials－ Determination of hardness(indentation technique)
KS M ISO 24999-2010(2021) Flexible cellular polymeric materials－Determination of fatigue by a constant-strain procedure
KS M ISO 1183-3:2003 Plastics－Methods for determining the density of non-cellular plastics－Part 3：Gas pyknometer method
KS M ISO 3385-2017(2022) Flexible cellular polymeric materials－Determination of fatigue by constant-load pounding
KS M ISO 1183-1:2014 Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
KS M ISO 9772:2011 Cellular plastics-Determination of horizontal burning characteristics of small specimens subjected to a small flame
KS M ISO 9772:2013 Cellular plastics ㅡ Determination of horizontal burning characteristics of small specimens subjected to a small flame
KS M ISO 1183:2006 Plastics-Methods for determining the density and relative density of non-cellular plastics
KS E 3048-2017(2022) Methods for determination of copper in blistercopper
KS M ISO 696:2007 Surface active agents－Measurement of foaming power－Modified Ross-Miles method
KS M ISO 11561:2009 Ageing of thermal insulation materials－Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods)
KS M 1080-2008(2018) Determination of lead and cadmium in foam for impact absorption

Military Standard of the People's Republic of China-General Armament Department, Determination method of foam gold

GJB 498-1988 Determination of foam characteristics of aviation turbine engine lubricating oil (static foam test)
GJB 1875-1994 Test methods for thermophysical properties of rigid foam plastics

Professional Standard - Petrochemical Industry, Determination method of foam gold

SH/T 0722-2002 Standard test method for high temperature foaming characteristics of lubricating oils
SH/T 0066-2002 Determination of Foaming Tendency of Engine Coolant (Glassware Method)

CH-SNV, Determination method of foam gold

SN EN 13523-20-2020 Coil coated metals - Test methods - Part 20: Foam adhesion

PL-PKN, Determination method of foam gold

PN-EN 13523-20-2020-12 E Coil coated metals - Test methods - Part 20: Foam adhesion
PN C89035-1992 Plastics. Methods for determining the density and relative density of non-cellular plastics
PN P04951-1967 Polyurethane foam foil for textile purposes Laboratory quali?y methods of ?est

AENOR, Determination method of foam gold

UNE-EN 13523-20:2012 Coil coated metals - Test methods - Part 20: Foam adhesion
UNE-EN ISO 7214:2012 Cellular plastics - Polyethylene - Methods of test (ISO 7214:2012)
UNE-EN 13565-1:2005+A1:2008 Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components
UNE-EN ISO 1183-2:2005 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004)
UNE-EN ISO 1183-3:2000 PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 3: GAS PYKNOMETER METHOD (ISO 1183-3:1999)
UNE-EN ISO 1183-1:2013 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
UNE 53231-2:2011 Plastics. Core of flexible polyurethane (PUR) foams for mattresses. Characteristics and test methods. Part 2: Core with one or several viscoelastic foams layers
UNE 53231-1:2011 Plastics. Core of flexible polyurethane (PUR) foams for mattresses. Characteristics and test methods. Part1: Core with one or several non viscoelastic foams layers
UNE 53260:2007 Plastics. Flexible polyurethane (PUR) foams for upholstered furniture. Characteristics and test methods.

Danish Standards Foundation, Determination method of foam gold

DS/EN 13523-20:2012 Coil coated metals - Test methods - Part 20: Foam adhesion
DS/EN ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method
DS/EN ISO 1183-3:2000 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method
DS/EN ISO 1183-1:2013 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method
DS/EN 13565-1+A1:2008 Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components
DS/ISO/R 1183:1985 Plastics for determining the density and relative density (Specific gravity) of plastics excluding cellular plastics

Lithuanian Standards Office , Determination method of foam gold

LST EN 13523-20-2012 Coil coated metals - Test methods - Part 20: Foam adhesion
LST EN ISO 7214:2012 Cellular plastics - Polyethylene - Methods of test (ISO 7214:2012)
LST EN ISO 1183-3:2001 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999)
LST EN ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004)
LST EN ISO 1183-1:2013 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
LST EN ISO 9054:2001 Cellular plastics, rigid - Test methods for self-skinned, high-density materials (ISO 9054:1990)

ES-UNE, Determination method of foam gold

UNE-EN 13523-20:2021 Coil coated metals - Test methods - Part 20: Foam adhesion
UNE-EN ISO 1183-2:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2019)
UNE-EN ISO 1183-1:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019, Corrected version 2019-05)
UNE-EN 13565-1:2019 Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components
UNE 53231-2:2011 ERRATUM:2012 Plastics. Core of flexible polyurethane (PUR) foams for mattresses. Characteristics and test methods. Part 2: Core with one or several viscoelastic foams layers
UNE-EN 17101:2018 Thermal insulation products for buildings - Methods of identification and test methods for one-component PU adhesive foam for External Thermal Insulation Composite Systems (ETICS) (Endorsed by Asociación Española de Normalización in January of 2019.)

American National Standards Institute （ANSI), Determination method of foam gold

ANSI/ASTM D2842:2001 Test Method for Water Absorption of Rigid Cellular Plastics (08.02)
ANSI/ASTM F1994:2000 Test Method for Shipboard Fixed Foam Firefighting Systems
ANSI/ASTM D3576:1998 Test Method for Cell Size of Rigid Cellular Plastics (08.02)
ANSI/ASTM D2856:1994 Open-Cell Content (Porosity) of Rigid Cellular Plastics by the Air Pycnometer, Test Method for (08.02)

GOSTR, Determination method of foam gold

GOST 20869-2017 Rigid cellular plastics. Method for determination of water absorption
GOST 25015-2017 Celluar plasticsand and foam rubber. Method for measuring linear dimensions
GOST R 53287-2009 Water and foam fire fighting systems. Fire alarm hydraulic, fire foam inducer, feeder. General technical requirements. Test methods
GOST R 58832-2020 Automatic water and foam fire extinguishing installations. In-building fire pipeline. Non-metallic pipes and fittings. Test methods
GOST R 53290-2009 Fire engineering. Foam fire-extinguishing installations. Low expansion foam generators for subsurfase extinguishing in tanks. General technical requirements. Test methods
GOST R 58792-2019 Fire equipment. Mobile compression foam generation systems. General technical requirements. Test methods

TR-TSE, Determination method of foam gold

TS 1818-1975 METHODS FOR DETERMINING THE DENSITY AND RELAT?VE DENSITY (SPECIFIC GRAVITY) OF PLASTICS EXCLUDING CEL?. Ul.AR PLASTICS
TS 2706-1977 FLEXIBLE CELLULAR MATERIALS HARD NESS TESTING BY INDENTATION TECHNIQUES
TS 3466-1980 FLEXIBLE CELLULAR MATERIALS - TEST FOR DYNAMIC FATIGUE BY CONSTANT LOAD POUNDING
TS 1834-1975 THE METHOD OF DETE?RMINATION OF FOAMING CHARACTE?RISITICS OF LTJtERICATING OILS

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Determination method of foam gold

PREN 2667-1989 Test Method for the Determination of Water Absorption of Structural Foam Film Adhesives
PREN 2667-6-1989 Aerospace Series Test Method for the Determination of Water Absorption of Structural Foam Film Adhesives (Issue P 1)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Determination method of foam gold

GB/T 33484-2017 Test method for shipboard fixed foam fire-fighting systems

BELST, Determination method of foam gold

STB 1610-2006 Metal panels with foam mineral-wool plates insulation and plastic foam insulation. Methods of test by loading. Rules of an estimation of durability and rigidity
STB 1740-2007 Metal sandwich - panels with mineral wool or foam plastic infilling. Mineral wool and foam plastics. Methods of determination strength and modulus of elasticity in tension, in compression and in shear
STB 11.13.07-2009 Fire safety standards system. Stationary low-expansion foam generators. General technical requirements and test methods

Aerospace, Security and Defence Industries Association of Europe (ASD), Determination method of foam gold

ASD-STAN PREN 2667-1989 Test Method for the Determination of Water Absorption of Structural Foam Film Adhesives
ASD-STAN PREN 2667-6-1989 Aerospace Series Test Method for the Determination of Water Absorption of Structural Foam Film Adhesives (Issue P 1)

CU-NC, Determination method of foam gold

NC 33-37-1985 Oil and Oil Derivatives. Lubricating Oils. Determination of the Tendency to Foam Forming Testing Method

International Organization for Standardization (ISO), Determination method of foam gold

ISO 2439:1972 Title missing - Legacy paper document
ISO 2439:2008 Flexible cellular polymeric materials - Determination of hardness (indentation technique)
ISO 1183-3:1999 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method
ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method
ISO 8307:2007 Flexible cellular polymeric materials - Determination of resilience by ball rebound
ISO 8307:2018 Flexible cellular polymeric materials - Determination of resilience by ball rebound
ISO/CD 1183-1:1969 Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method
ISO 1183-1:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method
ISO 1183-1:2019 Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method
ISO 1183:1987 Plastics; Methods for determining the density and relative density of non-cellular plastics
ISO 3385:1989 Flexible cellular polymeric materials; determination of fatigue by constant-load pounding
ISO 3385:2014 Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding
ISO/R 1183:1970 Plastics — Methods for determining the density and relative density (specific gravity) of plastics excluding cellular plastics
ISO 2439:1997/Cor 1:1998 Flexible cellular polymeric materials - Determination of hardness (indentation technique); Technical Corrigendum 1
ISO 1183-1:2012 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method
ISO 11561:1999 Ageing of thermal insulation materials - Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
ISO/DIS 7383 Fine bubble technology — Evaluation method for determining oxygen content in fine bubble dispersions in water
ISO/DIS 7392 Fine bubble technology — Evaluation method for determining surface tension of ultrafine bubble dispersions

BE-NBN, Determination method of foam gold

NBN T 46-004-1983 Cellular polymeric flexible materials - Determination of fatigue by constant load pounding
NBN-EN 24003-1993 Permeable sintered metal materials. Determination of bubble test pore size (ISO 4003: 1977)

VN-TCVN, Determination method of foam gold

TCVN 6039-3-2008 Plastics.Methods for determining the density of non-cellular plastics.Part 3: Gas pyknometer method
TCVN 6039-2-2008 Plastics.Methods for determining the density of non.cellular plastics.Part 2: Density gradient column method
TCVN 6039-1-2008 Plastics.Methods for determining the density of non-cellular plastics.Part 1: Immersion method, liquid pyknometer method and titration method
TCVN 6039-1-2015 Plastics - Methods for determining the density of non-cellular plastics .Part 1:Immersion method,liquid pyknometer method and titration method

CEN - European Committee for Standardization, Determination method of foam gold

EN ISO 1183-2:2019 Plastics - Methods for determining the density of noncellular plastics - Part 2: Density gradient column method
EN 13523-20:2004 Coil coated metals - Test methods - Part 20: Foam adhesion
PREN 13565-1-2016 Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components

ES-AENOR, Determination method of foam gold

UNE 53-161-1990
UNE 53-231-1991 Plastics. Core of flexible polyurethane foams for domestic mattresses. Characteristics and test methods

European Committee for Standardization (CEN), Determination method of foam gold

EN 13523-20:2011 Coil coated metals - Test methods - Part 20: Foam adhesion
EN ISO 8307:1997 Flexible Cellular Polymeric Materials - Determination of Resilience ISO 8307: 1990
EN ISO 8307:2018 Flexible cellular polymeric materials - Determination of resilience by ball rebound
EN ISO 8307:2007 Flexible cellular polymeric materials - Determination of resilience by ball rebound
EN ISO 3385:1995 Flexible Cellular Polymeric Materials - Determination of Fatigue by Constant-Load Pounding (ISO 3385 : 1989)
EN ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004)
EN ISO 1183-3:1999 Plastics - Methods for Determining the Density of Non-Cellular Plastics - Part 3: Gas Pyknometer Method ISO 1183-3:1999
EN 13565-1:2003+A1:2007 Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components
EN ISO 7231:2010 Polymeric materials, cellular, flexible - Determination of air flow value at constant pressure-drop (ISO 7231:2010)
EN ISO 1183-1:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method ISO 1183-1:2004
EN 2667-6:2001 Aerospace series - Non-metallic materials; Foaming structural adhesives; Test methods - Part 6: Determination of water absorption
EN ISO 7231:1997 Polymeric Materials, Cellular Flexible - Method of Assessment of Air Flow Value at Constant Pressure-Drop ISO 7231: 1984
EN 17101:2018 Thermal insulation products for buildings - Methods of identification and test methods for one-component PU adhesive foam for External Thermal Insulation Composite Systems (ETICS)
EN ISO 2439:2000 Flexible Cellular Polymeric Materials - Determination of Hardness (Indentation Technique) ISO 2439:1997, Including Technical Corrigendum 1:1998

Professional Standard - Forestry, Determination method of foam gold

LY/T 2557-2015 Method for determining the bio-based content of bio-based foam

Professional Standard - Geology, Determination method of foam gold

DZ/T 0279.19-2016 Methods of Analysis of Regional Geochemical Samples - Part 19: Determination of Gold and Foam Enrichment - Graphite Furnace Atomic Absorption Spectrometry
DZ/T 0279.4-2016 Methods for the Analysis of Regional Geochemical Samples Part 4: Gold Determination of Foam Enrichment - Inductively Coupled Plasma Mass Spectrometry
DZ/T 0279.9-2016 Methods of Analysis of Regional Geochemical Samples Part 9: Thallium Determination of Foam Enrichment - Inductively Coupled Plasma Atomic Emission Spectrometry

European Association of Aerospace Industries, Determination method of foam gold

AECMA PREN 2667-6-1989 Aerospace Series Test Method for the Determination of Water Absorption of Structural Foam Film Adhesives Issue P 1

Liaoning Provincial Standard of the People's Republic of China, Determination method of foam gold

DB21/T 3085-2018 Determination of formamide residues in foamed plastics and their products Gas chromatography-mass spectrometry
DB21/T 2840-2017 Method for rapid on-site detection of solid inorganic matter in molded polystyrene foam for thermal insulation
DB21/T 2836-2017 Method for rapid on-site testing of molded polystyrene foam for weight gain insulation with aqueous penetrant

Professional Standard - Chemical Industry, Determination method of foam gold

HG/T 2024-2009 Determination of scale inhibition performance of water treatment agents.Bubble method
HG/T 2024-1991 Determination method of scale inhibition performance of water treatment chemicals by bubbling method
HG/T 4574-2014 Polyurethane material.Determination of foam reaction characteristic

National Fire Protection Association (NFPA), Determination method of foam gold

NFPA 275-2009 Standard Method of Fire Tests for the Evaluation of Thermal Barriers Used over Foam Plastic Insulation Effective Date: 9/5/2008