ZH
RU
ES
value calculation
value calculation, Total:135 items.
In the international standard classification, value calculation involves: Fuels, Natural gas, Rubber and plastics products, Bearings, Wastes, Leather technology, Transport, Technical drawings, Road engineering, Wood, sawlogs and sawn timber, Structures of buildings, Road vehicle systems, Quality, Explosion protection, Nuclear energy engineering, Medical equipment, Elements of buildings, Protection of and in buildings, Energy and heat transfer engineering in general, Telecommunication terminal equipment, Information technology (IT) in general, Gas and steam turbines. Steam engines, Thermodynamics and temperature measurements, Paints and varnishes, Railway engineering in general, Protection against fire, Electrical wires and cables, Coals, Railway rolling stock, Electromagnetic compatibility (EMC), Reinforced plastics, Construction materials.
SE-SIS, value calculation
- SIS MNC 1101-1963 Calrulation oj lirinell hardness valuex
- SIS MNC 1102-1963 Calculation of Vickers hardnexs values
- SIS MNC 1101-1980 Meta I lic materials — Hardness test — Calculation of Brinell hardness values
- SIS MNC 1102-1980 Meta/lic materials — Hardness test — Calculation of Vickers hardness values
- SIS SS 18 71 72-1984 Biofuels - Determination of gross calorific value by calorimeter and calculation of net calorific value
- SIS SS 18 71 82-1990 Solid fuels — Determination of gross calorific value by the calorimeter bomb method, and calculation of net calorific value
HU-MSZT, value calculation
Korean Agency for Technology and Standards (KATS), value calculation
FI-SFS, value calculation
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, value calculation
- GB 2429-1988 Calculation method of net calorific value of aviation fuel
- GB/T 2429-1988 Aviation fuels--Calculation of net heat of combustion
- GB/T 15567-1995 Calculation of value of inertial forces of goods in railway transportation
- GB/T 31054-2014 Computer aided engineering for mechanical products.Finite element numerical calculation.Terminology
- GB/T 12576-1997 Liquified petroleum gases--Calculation of vapour pressure and relative density and octane number
German Institute for Standardization, value calculation
- DIN ISO 15312:2019-04 Rolling bearings - Thermal speed rating - Calculation (ISO 15312:2018)
- DIN 323-1:1974-08 Preferred Numbers and Series of Preferred Numbers; Basic Values, Calculated Values, Rounded Values
- DIN 51900:2022-06 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value / Note: Date of issue 2022-05-06*Intended as replacement for DIN 51900-1 (2000-04), DIN 51900-1 Berichtigung 1 (20...
- DIN CEN/TS 16023:2014 Characterization of waste - Determination of gross calorific value and calculation of net calorific value; German version CEN/TS 16023:2013
- DIN EN 14358:2016-11 Timber structures - Calculation and verification of characteristic values; German version EN 14358:2016
- DIN 51612:1980 Testing of liquefied petroleum gases; calculation of net calorific value
- DIN 51612:1980-06 Testing of liquefied petroleum gases; calculation of net calorific value
- DIN EN 14531-1:2019-05 Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles; German version EN 14531-1:2015+A1:2018
- DIN CEN/TS 16023:2014-03*DIN SPEC 19524:2014-03 Characterization of waste - Determination of gross calorific value and calculation of net calorific value; German version CEN/TS 16023:2013
- DIN EN 14531-1/A1:2017 Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles; German and English version EN 14531-1:2015/prA1:20
- DIN EN 14358:2007 Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample; German version EN 14358:2006
Aerospace Industries Association/ANSI Aerospace Standards, value calculation
KR-KS, value calculation
RO-ASRO, value calculation
- STAS 10317-1989 Fuels for diesel engimes CETANIC VALUE CALCULATION
- STAS SR ISO 1928:1995 Solid mineral fuels Determination of gross calorific value by the calorimeter bomb method and calculation of net calorific value
Association Francaise de Normalisation, value calculation
- NF M03-051:2002 Combustibles minéraux solides - Calcul de la teneur en oxygène par différence
- NF ISO 22628:2002 Véhicules routiers - Recyclabilité et valorisabilité - Méthode de calcul
- NF X06-042:1971 APPLICATIONS OF STATISTICS. INTERPRETATION OF TEST RESULTS. ESTIMATE OF MEAN. CONFIDENCE INTERVAL.
- NF P21-399*NF EN 14358:2016 Timber structures - Calculation and verification of characteristic values
- NF M03-005:2011 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value.
- NF EN 14531-1/IN1:2018 Applications ferroviaires - Méthodes de calcul des distances d'arrêt, de ralentissement et d'immobilisation - Partie 1 : algorithmes généraux utilisant le calcul par la valeur moyenne pour des rames ou des véhicules isolés
- NF EN 14531-1+A1:2018 Applications ferroviaires - Méthodes de calcul des distances d'arrêt, de ralentissement et d'immobilisation - Partie 1 : algorithmes généraux utilisant le calcul par la valeur moyenne pour des rames ou des véhicules isolés
- NF F11-531-1*NF EN 14531-1+A1:2018 Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1 : general algorithms utilizing mean value calculation for train sets or single vehicles
- NF F11-531-1/IN1*NF EN 14531-1/IN1:2018 Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1 : general algorithms utilizing mean value calculation for train sets or single vehicles
- XP X30-479*XP CEN/TS 16023:2013 Characterization of waste - Determination of gross calorific value and calculation of net calorific value
- XP CEN/TS 16023:2013 Caractérisation des déchets - Détermination du pouvoir calorifique supérieur et calcul du pouvoir calorifique inférieur
- NF P21-399:2007 Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample.
- NF T30-499-4:2011 Coating powders - Part 4 : calculation of lower explosion limit.
- NF C74-985*NF EN IEC 62985:2019 Methods for calculating size specific dose estimates (SSDE) on computed tomography
CZ-CSN, value calculation
- CSN 38 5572-1988 Natural gas. Calculation of calorific value, density and relative density
British Standards Institution (BSI), value calculation
- BS ISO 15312:2004 Rolling bearings - Thermal speed rating - Calculation and coefficients
- BS EN 14358:2006 Timber structures — Calculation of characteristic 5-percentile values and acceptance criteria for a sample
- PD ISO/TR 22302:2014 Natural gas. Calculation of methane number
- BS ISO 1928:2009 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
- BS EN ISO 8130-4:2010 Coating powders. Calculation of lower explosion limit
- BS EN 14358:2007 Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample
- BS IEC 60287-2-1:2023 Electric cables. Calculation of the current rating. Thermal resistance. Calculation of thermal resistance
- BS IEC 60287-2-1+A2:1997 Electric cables. Calculation of the current rating. Thermal resistance. Calculation of thermal resistance
- BS IEC 60287-2-1:1994+A2:2006 Electric cables - Calculation of the current rating - Thermal resistance - Calculation of thermal resistance
- BS IEC 60287-2-1:2015 Electric cables. Calculation of the current rating. Thermal resistance. Calculation of thermal resistance
- BS EN 14531-1:2015 Railway applications. Methods for calculation of stopping and slowing distances and immobilization braking. General algorithms utilizing mean value calculation for train sets or single vehicles
- BS EN 14531-1:2015+A1:2018 Railway applications. Methods for calculation of stopping and slowing distances and immobilization braking. General algorithms utilizing mean value calculation for train sets or single vehicles
- BS ISO/TS 16799:2000 Rolling bearings - Dynamic load ratings and rating life - Discontinuities in the calculating of basic dynamic load ratings
- BS EN 14358:2016 Tracked Changes. Timber structures. Calculation and verification of characteristic values
- BS 7769-2.1:1997 Electric cables - Calculation of the current rating - Thermal resistance - Calculation of thermal resistance
RU-GOST R, value calculation
- GOST 32305-2013 Rolling bearings. Thermal speed rating. Calculation and coefficients
- GOST R 50088-1992 Water-moderated water-cooled power reactors. General requirements to performing of neutron physical calculations
- GOST R 55682.4-2013 Water-tube boilers and auxiliary installations. Part 4. In-service boiler life expectancy calculations
- GOST R 57845-2017 Polymer composites. Calculation of normative values for structural materials
- GOST 147-2013 Solid mineral fuel. Determination of gross calorific value and calculation of net calorific value
European Committee for Standardization (CEN), value calculation
- PD CEN/TS 16023:2013 Characterization of waste - Determination of gross calorific value and calculation of net calorific value
- EN 14358:2006 Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample
- EN ISO 6976:2016 Natural gas - Calculation of calorific values@ density@ relative density and Wobbe indices from composition
- EN 12952-4:2000 Water-Tube Boilers and Auxiliary Installations - Part 4: In-Service Boiler Life Expectancy Calculations
- EN 12952-4:2011 Water-tube boilers and auxiliary installations - Part 4: In-service boiler life expectancy calculations
- EN ISO 8130-4:2022 Coating powders - Part 4: Calculation of lower explosion limit (ISO 8130-4:2021)
- EN ISO 8130-4:2010 Coating powders - Part 4: Calculation of lower explosion limit (ISO 8130-4:1992, including Cor 1:1993)
- CEN/TS 16023:2013 Characterization of waste - Determination of gross calorific value and calculation of net calorific value
- EN 922:1994 Plastics Piping and Ducting Systems - Pipes and Fittings of Unplasticized Poly(Vinyl Chloride) (PVC-U) - Specimen Preparation for Determination of the Viscosity Number and Calculation of the K-Value
American Society for Testing and Materials (ASTM), value calculation
- ASTM D3897-91(2012) Standard Practice for Calculation of Basicity of Chrome Tanning Liquors
- ASTM D4460-22 Standard Practice for Calculating Precision Limits Where Values Are Calculated from Other Test Methods
- ASTM E1231-19 Standard Practice for Calculation of Hazard Potential Figures of Merit for Thermally Unstable Materials
- ASTM E1231-01(2006) Standard Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials
- ASTM E1231-01 Standard Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials
- ASTM E1231-01e1 Standard Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials
- ASTM E1231-96a Standard Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials
- ASTM D4460-22a Standard Practice for Calculating Precision Limits Where Values Are Calculated from Other Test Methods
- ASTM E1231-10 Standard Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials
- ASTM D6841-02 Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber
- ASTM D2962-10 Standard Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches
Professional Standard - Railway, value calculation
- TB/T 3181-2014 Calculation of values of inertial force of goods in railway transportation
- TB/T 3181-2007 Calculation of cargo inertia force value during railway transportation
- TB/T 2217-1991 Calculation of Average Fuel Consumption Rate of Diesel Locomotive
GB-REG, value calculation
CEN - European Committee for Standardization, value calculation
- EN 14358:2016 Timber structures - Calculation and verification of characteristic values
Danish Standards Foundation, value calculation
- DS 1117:1980 Timber structures. Testing of mechanical timber fasteners. Requirements to the wood and calculations of characteristic values
International Organization for Standardization (ISO), value calculation
- ISO 18868:2013/Amd 1:2020 Commercial road vehicles — Coupling equipment between vehicles in multiple vehicle combinations — Strength requirements — Amendment 1: Clarification for calculation for V-value for combinations includ
- ISO/CD 20138-1:2023 Railway applications — Calculation of braking performance (stopping, slowing and stationary braking) — Part 1: General algorithms utilizing mean value calculation
- ISO 1928:1995 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value
- ISO 20138-1:2018 Railway applications — Calculation of braking performance (stopping, slowing and stationary braking) — Part 1: General algorithms utilizing mean value calculation
- ISO 20138-1:2018/CD Amd 1 Railway applications — Calculation of braking performance (stopping, slowing and stationary braking) — Part 1: General algorithms utilizing mean value calculation — Amendment 1
- ISO 1928:1976 Solid mineral fuels — Determination of gross calorific value by the calorimeter bomb method, and calculation of net calorific value
- ISO 8130-4:1992 Coating powders; part 4: calculation of lower explosion limit
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., value calculation
- ASHRAE 183-2007 Peak Cooling and Heating Load Calculations in Buildings Except Low-Rise Residential buildings
Professional Standard - Medicine, value calculation
Japanese Industrial Standards Committee (JISC), value calculation
- JIS A 2102-2:2011 Thermal performance of windows and doors -- Calculation of thermal transmittance -- Part 2: Numerical method for frames
- JIS M 8814:2003 Coal and coke -- Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value
VN-TCVN, value calculation
- TCVN 7075-2002 Control charts for arithmetic average with warning limits
International Telecommunication Union (ITU), value calculation
- ITU-R SF.675-3 FRENCH-1994 CALCULATION OF THE MAXIMUM POWER DENSITY (AVERAGED OVER 4 kHz) OF AN ANGLE-MODULATED CARRIER CALCUL DE LA DENSIT?MAXIMALE DE PUISSANCE (MOYENNE DANS UNE BANDE DE 4 kHz) D'UNE ONDE PORTEUSE ?MODULATION ANGULAIRE
- ITU-T P.79-1999 Calculation of Loudness Ratings for Telephone Sets - Series P: Telephone Transmission Quality, Telephone Installations, Local Line Networks - Measurements Related to Speech Loudness Study Group 12; COVERING NOTE: 05/25/2000; COVERING NOTE: 01/27/2005
- ITU-T P.79 ANNEX G-2001 Calculation of Loudness Ratings for Telephone Sets Annex G: Wideband Loudness Rating Algorithm Series P: Telephone Transmission Quality, Telephone Installations, Local Line Networks Measurements Related to Speech Loudness Study Group 12
- ITU-T P.79 CORR.1-2000 Calculation of Loudness Ratings for Telephone Sets Corrigendum 1
- ITU-T P.79-1993 (WITHDRAWN) Calculation of Loudness Ratings for Telephone Sets - Telephone Transmission Quality Measurements Related to Speech Loudness Study Group XII; 31 pp
- ITU-R S.736-3 FRENCH-1997 ESTIMATION OF POLARIZATION DISCRIMINATION IN CALCULATIONS OF INTERFERENCE BETWEEN GEOSTATIONARY-SATELLITE NETWORKS IN THE FIXED-SATELLITE SERVICE
- ITU-R S.736-3 SPANISH-1997 ESTIMATION OF POLARIZATION DISCRIMINATION IN CALCULATIONS OF INTERFERENCE BETWEEN GEOSTATIONARY-SATELLITE NETWORKS IN THE FIXED-SATELLITE SERVICE
- ITU-T P.79-2007 Calculation of loudness ratings for telephone sets (Study Group 12)
Group Standards of the People's Republic of China, value calculation
- T/CA 002-2017 Thinking Value Cloud Computing Evaluation Criteria
- T/ZQCSH 012-2021 Energy consumption limit and calculation method of automobile 4S shop
Society of Automotive Engineers (SAE), value calculation
- SAE AS5054-1998 Areas for Calculating Stress or Load Values for Externally and Internally Threaded UNJ Fasteners R(2004)
ES-UNE, value calculation
- UNE-EN 14358:2016 Timber structures - Calculation and verification of characteristic values
- UNE-EN 14531-1:2016+A1:2019 Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles
Taiwan Provincial Standard of the People's Republic of China, value calculation
- CNS 10835-1984 Method of Test for Gross Calorific Value of Solid Mineral Fuels by the Calorimeter Bomb Method, and Calculation of Net Calorific Value
TR-TSE, value calculation
- TS 2678-1977 Determination of Gross Calorific Value By The Calorimetric Bomb Method And Calculation of Net Calorific Value
International Electrotechnical Commission (IEC), value calculation
- IEC 62985:2019/COR1:2022 Corrigendum 1 - Methods for calculating size specific dose estimates (SSDE) for computed tomography
- CISPR 16-4-4-2003 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4:Uncertainties,statistics and limit modelling - Statistics of complaints and a model for the calculation of limits
ZA-SANS, value calculation
- SANS 1928:2009 Solid mineral fuels - Determination of gross calorific value by the bomb calorific method, and calculation of net calorific value
GOSTR, value calculation
- GOST R 58459-2019 Timber structures. Determination of the normative and calculated values of the mechanical properties of wood and materials based on it
Standard Association of Australia （SAA）, value calculation
- AS/NZS CISPR 16.4.4:2004 Specification for radio disturbance and immunity measuring apparatus and methods - Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits
European Committee for Electrotechnical Standardization（CENELEC）, value calculation
- EN IEC 62985:2019 Methods for calculating size specific dose estimates (SSDE) on computed tomography