ZH
RU
ES

What are the bending test standards?

What are the bending test standards?, Total:382 items.

In the international standard classification, What are the bending test standards? involves: Construction materials, Surface treatment and coating, Semiconducting materials, Plastics, Products of the textile industry, Medical equipment, Leather technology, Reinforced plastics, Welding, brazing and soldering, Paints and varnishes, Non-ferrous metals, Testing of metals, Road engineering, Adhesives, Cellular materials, Products of non-ferrous metals, Mechanical testing, Paper and board, Iron and steel products, Insulating materials, Elements of buildings, Fasteners, Ceramics, Linear and angular measurements, Rubber, Products of the chemical industry, Rubber and plastics products, Springs, Glass, Wood-based panels, Electrical accessories, Road vehicles in general, Environmental testing, Earthworks. Excavations. Foundation construction. Underground works, Pipeline components and pipelines, Soil quality. Pedology, Refractories, Raw materials for rubber and plastics.

American Society for Testing and Materials (ASTM), What are the bending test standards?

ASTM C880-98 Standard Test Method for Flexural Strength of Dimension Stone
ASTM D522/D522M-17(2021) Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D522/D522M-17 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D6905-03 Standard Test Method for Impact Flexibility of Organic Coatings
ASTM D6905-03(2008) Standard Test Method for Impact Flexibility of Organic Coatings
ASTM D6905-03(2012) Standard Test Method for Impact Flexibility of Organic Coatings
ASTM D522-93a(2001) Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D522-93a Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D522/D522M-13 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM F534-02 Standard Test Method for Bow of Silicon Wafers
ASTM D3043-00 Standard Test Methods for Testing Structural Panels in Flexure
ASTM F534-97 Standard Test Method for Bow of Silicon Wafers
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D2136-02(2012) Standard Test Method for Coated Fabricsmdash;Low-Temperature Bend Test
ASTM F1874-98(2011) Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
ASTM E29-67(1980)e1 Standard Test Method for Indicating Which Places Of Figures Are To Be Considered Significant In Specified Limiting Values
ASTM D2097-03(2023) Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM D2097-03(2016) Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM C880/C880M-18e1 Standard Test Method for Flexural Strength of Dimension Stone
ASTM D7914/D7914M-21 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM C120-06e1 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120-06 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120/C120M-09 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM D2136-94(1998) Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM F1874-98(2004) Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
ASTM F1874-98 Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
ASTM F384-06(2011) Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
ASTM E190-14 Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM C120/C120M-15a Standard Test Methods for Flexure Testing of Structural and Roofing Slate
ASTM C120/C120M-19 Standard Test Methods for Flexure Testing of Structural and Roofing Slate
ASTM E190-21 Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM D2136-19 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
ASTM D2136-19e1 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
ASTM C880-06 Standard Test Method for Flexural Strength of Dimension Stone
ASTM D2136-02 Standard Test Method for Coated Fabrics8212;Low-Temperature Bend Test
ASTM D2136-02e1 Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM C1352-96(2002) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352-96 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM D2136-02(2007) Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM C1352-96(2008) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM G10-10 Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM C1352/C1352M-09 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM G10-83(1996)e1 Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM C880/C880M-09 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C393-00 Standard Test Method for Flexural Properties of Sandwich Constructions
ASTM C1352/C1352M-21 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C880/C880M-18 Standard Test Method for Flexural Strength of Dimension Stone
ASTM G10-10(2019) Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM D7774-22 Standard Test Method for Flexural Fatigue Properties of Plastics
ASTM B478-85(2016) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM C880/C880M-15 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C1352/C1352M-15 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM D7774-17 Standard Test Method for Flexural Fatigue Properties of Plastics
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E290-97a(2004) Standard Test Methods for Bend Testing of Material for Ductility
ASTM E290-13 Standard Test Methods for Bend Testing of Material for Ductility
ASTM D7196-23 Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples
ASTM D4338-97(2004) Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D4338-97(2011)e1 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D4338-97 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D3768-22 Standard Test Method for Microcellular Urethanes—Flexural Recovery
ASTM E190-92(2008) Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM C480/C480M-16 Standard Test Method for Flexure Creep of Sandwich Constructions
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM G70-07 Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
ASTM D6125-97 Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester)
ASTM B593-96 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2003) Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM G70-81(1998) Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
ASTM B593-96(2003)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2009)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-20 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM D6125-97(2002) Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester)
ASTM E2948-14 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM B593-21 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2014)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM E518-03 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM F1575/F1575M-21 Standard Test Method for Determining Bending Yield Moment of Nails
ASTM G10-10(2015) Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM C674-13(2018) Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
ASTM C674-13(2023) Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
ASTM B490-09(2021) Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
ASTM F1575-17 Standard Test Method for Determining Bending Yield Moment of Nails
ASTM D1184-98(2020) Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
ASTM D648-18 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM E2948-16a Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM E2948-22 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM E290-97a Standard Test Method for Bend Testing of Material for Ductility
ASTM E290-09 Standard Test Methods for Bend Testing of Material for Ductility
ASTM D8069-17a Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM D8069-17 Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM D3111-99 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM D623-07 Standard Test Methods for Rubber Property8212;Heat Generation and Flexing Fatigue In Compression
ASTM D3111-10(2018) Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM E2948-16 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM E2948-16e1 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM F3359-18 Standard Test Method for Determining Bending Yield Moment of Staples
ASTM E518-02 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM D7264/D7264M-07 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM C1025-91(2010)e1 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM F3359-19 Standard Test Method for Determining Bending Yield Moment of Staples
ASTM E529-94(1998)e1 Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
ASTM F3359/F3359M-21 Standard Test Method for Determining Bending Yield Moment of Staples
ASTM E529-04(2018) Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
ASTM D7914/D7914M-14 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM D3111-10 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM D6515-00(2010) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM C1072-06 Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM D4032-94 Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D4032-94(2001) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D7264/D7264M-06 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D4032-08 Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D3885-07a Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D4032-08(2012) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D3885-07a(2019) Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D7264/D7264M-21 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D7264/D7264M-15 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D3885-07A(2019)e1 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D6515-00(2023)e1 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D4032-08(2016) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D3768-11 Standard Test Method for Microcellular Urethanesmdash;Flexural Recovery
ASTM D6515-00(2016) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D623-99e1 Standard Test Methods for Rubber Property-Heat Generation and Flexing Fatigue In Compression
ASTM D623-99 Standard Test Methods for Rubber Property-Heat Generation and Flexing Fatigue In Compression
ASTM E855-08 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM B820-23 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
ASTM C158-95 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C1161-02a Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161-02c Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM B820-98 Standard Test Method for Bend Test for Formability of Copper Alloy Spring Material
ASTM C120-00 Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture, Modulus of Elasticity)
ASTM D6515-00 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D6515-00(2004) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C1161-02b Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM D610-85(1989)e1 Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces
ASTM D6515-00(2009) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM C393/C393M-06 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D6109-97e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber
ASTM C158-95(2000) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM G39-99 Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C158-02 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D6395-10 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics
ASTM C393/C393M-20 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM G39-99(2021) Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
ASTM D7811-13(2022) Standard Test Method for Bow and Skew Using a Measuring Tool
ASTM C1161-18 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161-02c(2008) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM B820-04e1 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
ASTM B820-04 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
ASTM D5342-97 Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration)
ASTM E855-08(2013) Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM A1122/A1122M-22 Standard Test Method for Bend Testing of Metallic-Coated Steel Sheet to Evaluate Coating Adhesion
ASTM D5342-97(2002) Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration)
ASTM B820-14 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
ASTM B820-14a Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
ASTM D5342-97(2007) Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration)
ASTM B820-18 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
ASTM D4476-97 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
ASTM D4694-96(2003) Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
ASTM D5418-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
ASTM D4476-03 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
ASTM E529-04 Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
ASTM D747-99 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D4476-09 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
ASTM E529-04(2011) Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
ASTM D4476/D4476M-14 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
ASTM D4694-09(2015) Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
ASTM D747-02 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D747-08 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM B820-09 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
ASTM C120-05 Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture, Modulus of Elasticity)
ASTM C203-99 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM C203-05a Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM C203-05 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM D8388/D8388M-22 Standard Practice for Flexural Residual Strength Testing of Damaged Sandwich Constructions
ASTM C1495-16(2023) Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
ASTM C203-22 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM C203-05a(2012) Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM C203-05a(2017) Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM C1495-16 Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
ASTM D4338-97(2016) Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D747-10 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM C120/C120M-15 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM D2990-95 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
ASTM D2990-01 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
ASTM D7249/D7249M-12 Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM F2942-13 Standard Guide for in vitro Axial, Bending, and Torsional Durability Testing of Vascular Stents
ASTM D7249/D7249M-12e1 Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
ASTM F2942-19 Standard Guide for in vitro Axial, Bending, and Torsional Durability Testing of Vascular Stents
ASTM D2990-17 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
ASTM C1228-96 Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
ASTM C1228-96(2015) Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
ASTM E855-90(1995) Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM E855-21 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM D8458-22 Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test
ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM C598-93(2003) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C1499-02 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C149-86(2000) Standard Test Method for Thermal Shock Resistance of Glass Containers
ASTM C1499-08 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C598-93(2008) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM F2750-09 Standard Test Method for Determining the Effects of Bending a Membrane Switch or Assembly
ASTM C78/C78M-10 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C293/C293M-10 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM C393/C393M-11 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM C393/C393M-11e1 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM D7460-08 Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending
ASTM C120/C120M-12 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C1499-19 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM D3929-03(2023) Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C598-93(2013) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C393/C393M-16 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C1341-00(2005) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM C1341-00 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM D623-07(2019) Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression
ASTM D3929-03 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM C1341-06 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM E2899-13 Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
ASTM E2899-15 Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C1341-13(2018) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM C1684-18(2023) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
ASTM D1052-09(2019) Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus
ASTM C1341-13 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM D4602-93(2015) Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment
ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C1228-96(2023) Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
ASTM C947-03(2023) Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM D6415-99e1 Standard Test Method for Measuring the Curved Beam Stength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D1632-07 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
ASTM D6415/D6415M-22 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D1632-17e1 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
ASTM D1632-17 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
ASTM D6109-19 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
ASTM D5516-17 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
ASTM D5516-18 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
ASTM D790-17 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D5516-09 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
ASTM D8044-23 Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance Using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures
ASTM F2082-06 Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery
ASTM D8044-16 Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures
ASTM C1899-21 Standard Test Method for Flexural Strength of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
ASTM C1609/C1609M-19 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-05 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-06 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM D3929-96e1 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM F1659-95 Standard Test Method for Bending and Shear Fatigue Testing of Calcium Phosphate Coatings on Solid Metallic Substrates
ASTM D3929-03(2010)e1 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM C1609/C1609M-07 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-19a Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM D5365-18 Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM C1609/C1609M-12 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM D3929-03(2015) Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM D790-15 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D790-15e2 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM F1160-14(2017)e1 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
ASTM C1550-03a Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C1550-08 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C1550-10 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM D7341-21 Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing
ASTM D7341-09 Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing
ASTM C1609/C1609M-10 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1550-03 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C1550-12 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C1550-05 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C1550-19 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C1550-02 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM D7341-14 Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing
ASTM D7341-08 Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing
ASTM C1550-20 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C349-18 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
ASTM C1550-12a Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM F1160-00 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
ASTM F1160-00e1 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
ASTM F1160-05 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
ASTM F1160-05(2011)e1 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
ASTM C1465-08(2019) Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
ASTM C1368-00 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Ambient Temperature
ASTM C1824-16(2021) Standard Test Method for Full Scale Bending Test of Spun Prestressed Concrete Bases for Tapered Steel Lighting Poles
ASTM F1160-14 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
ASTM C1576-05(2017) Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
ASTM C1824-16 Standard Test Method for Full Scale Bending Test of Spun Prestressed Concrete Bases for Tapered Steel Lighting Poles
ASTM C1824-16e1 Standard Test Method for Full Scale Bending Test of Spun Prestressed Concrete Bases for Tapered Steel Lighting Poles
ASTM C1834-16 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Elevated Temperatures
ASTM D8019-15 Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets
ASTM D5365-06 Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D5365-01 Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D5365-99 Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D5365-01e1 Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D5365-12 Standard Test Method for Long-Term Ring-Bending Strain of ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM C1674-23 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
ASTM C1368-06 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Ambient Temperature
ASTM C1576-05 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
ASTM B489-85(1998) Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
ASTM F2082-01 Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery
ASTM E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM F2082-15 Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery
ASTM F2082/F2082M-16 Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery
ASTM E2769-15 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D8295-19 Standard Test Method for Determination of Shear Wave Velocity and Initial Shear Modulus in Soil Specimens using Bender Elements
ASTM D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
ASTM B489-85(2018) Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
ASTM C349-14 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
ASTM F2082/F2082M-23 Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery
ASTM C1368-01 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Ambient Temperature
ASTM D5516-03 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
ASTM D6648-01 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM C34-96(2001) Standard Specification for Structural Clay Load-Bearing Wall Tile
ASTM C651-91(2005)e1 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-91(2010)e1 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C349-97 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
ASTM C651-20 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM B489-85(2023) Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
ASTM C651-11 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-13 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-15 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM D1634-00(2006) Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
ASTM D1634-00 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D1634-17 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
ASTM D6272-10 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D7460-10 Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending
ASTM D6023-02 Standard Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)
ASTM D6023-96 Standard Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)
ASTM D6272-02 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-00 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM B489-85(2008)e1 Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
ASTM F3147-15 Standard Test Method for Evaluating the Reliability of Surface Mounted Device (SMD) Joints on a Flexible Circuit by a Rolling Mandrel Bend
ASTM B489-85(2013) Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
ASTM C947-03(2016) Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM C1576-05(2010) Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
ASTM C1018-97 Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) (Withdrawn 2006)

AASHTO - American Association of State Highway and Transportation Officials, What are the bending test standards?

T285-1989 Standard Method of Test for Bend Test for Bars for Concrete Reinforcement
T 285-1989 Standard Method of Test for Bend Test for Bars for Concrete Reinforcement
TP1-1998 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1997 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 321-2007 Standard Method of Test for Determining the Fatigue Life of Compacted Hot-Mix Asphalt (HMA) Subjected to Repeated Flexural Bending
T 321-2003 Standard Method of Test for Determining the Fatigue Life of Compacted Hot-Mix Asphalt (MHA) Subjected to Repeated Flexural Bending
TP8-1994 Standard Test Method for Determining the Fatigue Life of Compacted Hot Mix Asphalt (HMA) Subjected to Repeated Flexural Bending (2000 Edition)
T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 321-2014 Standard Method of Test for Determining the Fatigue Life of Compacted Asphalt Mixtures Subjected to Repeated Flexural Bending
TP 105-2013 Standard Method of Test for Determining the Fracture Energy of Asphalt Mixtures Using the Semicircular Bend Geometry (SCB)
T 97-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
T 97-2003 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
TP19-1993 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) (Edition 1A)

Korean Agency for Technology and Standards (KATS), What are the bending test standards?

KS F 2395-2014 Standard test method for bend testing of asphalt mixtures
KS F 2491-2017 Standard test method of the flexural beam test for porous asphalt binder
KS F 2395-2014(2019) Standard test method for bend testing of asphalt mixtures
KS F 2491-2017(2022) Standard test method of the flexural beam test for porous asphalt binder
KS F 2413-2020 Standard test method for compressive strength of concrete after flexural strength test
KS F 2566-2014(2019) Standard test method for flexural performance of fiber reinforced concrete

PK-PSQCA, What are the bending test standards?

PS 608-1967 PAKISTAN STANDARD SPECIFICATION FOR BEND TEST ON STEEL TUBES

The American Road & Transportation Builders Association, What are the bending test standards?

AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
AASHTO T 321-2007 Standard Method of Test for Determining the Fatigue Life of Compacted Hot-Mix Asphalt (HMA) Subjected to Repeated Flexural Bending
AASHTO T 321-2014 Standard Method of Test for Determining the Fatigue Life of Compacted Asphalt Mixtures Subjected to Repeated Flexural Bending
AASHTO TP 105-2013 Standard Method of Test for Determining the Fracture Energy of Asphalt Mixtures Using the Semicircular Bend Geometry (SCB)
AASHTO T 97-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

Professional Standard - Railway, What are the bending test standards?

TB/T 2092-2003 Post-tensioned pre-cast concrete simple-supported girder for railway bridge pro-stress

Indonesia Standards, What are the bending test standards?

SNI 4154-2014 Standard test method for flexural strength of concrete (using simple beam with center-point loading)

Association Francaise de Normalisation, What are the bending test standards?

NF P18-163*NF EN 524-3:1997 Steel strip sheaths for prestressing tendons. Test methods. Part 3 : to-and-fro bending test.

US-CFR-file, What are the bending test standards?

CFR 40-60.5413-2013 Protection of Environment. Part60:Standards of performance for new stationary sources. Section60.5413:What are the performance testing procedures for control devices used to demonstrate compliance at my storage vessel or centrifugal compressor affected fa
CFR 40-63.144-2014 Protection of Environment. Part63:National emission standards for hazardous air pollutants for source categories. Section63.144:Process wastewater provisions—test methods and procedures for determining applicability and Group 1/Group 2 determinations (det