ZH
RU
ES
Forging line detection
Forging line detection, Total:82 items.
In the international standard classification, Forging line detection involves: Testing of metals, Iron and steel products, Analytical chemistry, Railway rolling stock, Materials for aerospace construction, Fluid storage devices, Non-ferrous metals, Non-destructive testing, Radiation measurements, Applications of information technology, Measurement of fluid flow, Electrical and electronic testing, Electronic components in general, Medical equipment, Ferrous metals, Water quality, Power transmission and distribution networks, Protection against electric shock, Hospital equipment, Products of non-ferrous metals, Pipeline components and pipelines, Quality, Linear and angular measurements.
German Institute for Standardization, Forging line detection
- DIN EN 12681:2003 Founding - Radiographic examination; German version EN 12681:2003
- DIN EN 17263:2019 Copper and copper alloys - Eddy current testing on the outer surface of rods, bars, hollow rods and wires for the detection of defects by encircling test coil
- DIN 54141-2:1982 Non-destructive testing; Eddy current testing of pipes and tubes; Reference method for the determination and calibration of the properties of an eddy current testing system using concentric test coils
- DIN EN 3683:2007 Aerospace series - Test methods - Titanium alloy wrought products - Determination of primary αcontent - Point count method and line intercept method; German and English version EN 3683:2007
工业和信息化部, Forging line detection
American Society for Testing and Materials (ASTM), Forging line detection
- ASTM E2375-16 Standard Practice for Ultrasonic Testing of Wrought Products
- ASTM E2375-08(2013) Standard Practice for Ultrasonic Testing of Wrought Products
- ASTM B594-19 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products
- ASTM B594-19e1 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products
- ASTM G209-14(2018) Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys
- ASTM G209-14(2022) Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys
- ASTM G209-13 Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys
- ASTM G209-12a Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys
- ASTM G209-12 Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys
- ASTM D7511-12(2017)e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM D7511-09e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM D7511-09 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM F3283/F3283M-18 Standard Specification for the Manufacturing of High-Voltage Proximity Alarm to be used for the Detection of Overhead High Voltage Alternating Current (AC)
- ASTM E2984/E2984M-14 Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization
HU-MSZT, Forging line detection
Professional Standard - Railway, Forging line detection
- TB/T 3575.3-2023 Non-destructive testing of rolling stock forged steel parts Part 3: Eddy current testing
British Standards Institution (BSI), Forging line detection
- BS 2B 100:2009 Procedure for inspection, testing and acceptance of wrought copper alloys
- BS B 100:1992 Procedure for inspection, testing and acceptance of wrought copper alloys
- BS 3TA 100:2009 Procedure for inspection, testing and acceptance of wrought titanium and titanium alloys
- BS EN 17263:2019 Copper and copper alloys. Eddy current testing on the outer surface of rods, bars, hollow rods and wires for the detection of defects by encircling test coil
- BS PD ISO/TS 17951-1:2016 Water quality. Determination of fluoride using flow analysis (FIA and CFA). Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation
- BS EN 3683:2007 Aerospace series - Test methods - Titanium alloy wrought products - Determination of primary content - Point count method and line intercept method
Society of Automotive Engineers (SAE), Forging line detection
- SAE AMS2370K-2011 Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Wrought Products and Forging Stock
- SAE AMS2355B-1971 QUALITY ASSURANCE SAMPLING AND TESTING OF ALUMINUM AND MAGNESIUM ALLOYS Wrought Products Except Forgings
RO-ASRO, Forging line detection
Shaanxi Provincial Standard of the People's Republic of China, Forging line detection
- DB61/T 1163-2018 Eddy current inspection rules for in-service artificial crystal kettles
CH-SNV, Forging line detection
Association Francaise de Normalisation, Forging line detection
- NF A05-111*NF EN ISO 196:1995 Wrought copper and copper alloys. Detection of residual stress. Mercury(I) nitrate test.
- NF EN 61788-8:2015 Supraconductivité - Partie 8 : mesures des pertes en courant alternatif - Mesure de la perte totale en courant alternatif des fils supraconducteurs ronds exposés à un champ magnétique alternatif transverse par une méthode par bobines de détection
- NF EN 17263:2019 Cuivre et alliages de cuivre - Contrôle par courants de Foucault de la surface externe des barres, des barres rectangulaires, des barres creuses et des fils pour la détection des défauts avec une bobine encerclante
IN-BIS, Forging line detection
U.S. Military Regulations and Norms, Forging line detection
Professional Standard - Machinery, Forging line detection
- JB/T 11279-2012 Non-destructive testing instruments.Eddy current line array probe
RU-GOST R, Forging line detection
- GOST 16948-1979 Light sources, artificial. Method of determining ultraviolet radiation density energy flow
- GOST 4.446-1986 System of product-quality indices. Measuring means for linear and angular measurements in mechanical engineering. Nomenclature of indices
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Forging line detection
- GB/T 42980-2023 Test method for intelligent manufacturing machine vision online inspection system
- GB/T 11114-1989 Method for detecting dislocations of synthetic quartz using X-ray topographic technique
- GB/Z 41285.4-2022 Non-destructive testing instruments—Radiation protection rules for the technical application of sealed radioactive sources—Part 4:Construction and testing of mobile apparatus for γ radiography
International Organization for Standardization (ISO), Forging line detection
- ISO 3455:1976 Liquid flow measurement in open channels; Calibration of rotating-element current-meters in straight open tanks
- ISO/DIS 9584.2 Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants
- ISO/FDIS 9584:2023 Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants
- ISO 9584:2011 Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants
国家市场监督管理总局、中国国家标准化管理委员会, Forging line detection
- GB/T 38240-2019 Non-destructive testing instruments—Standard practice for manufacturing characterization of digital detector arrays
- GB/T 40659-2021 Intelligent manufacturing—Online detection system based on machine vision—General requirements
Taiwan Provincial Standard of the People's Republic of China, Forging line detection
- CNS 13406-1994 Method of Eddy Current Test for Steel Products by Encircl ing Coil Technique
Defense Logistics Agency, Forging line detection
- DLA DSCC-DWG-10006-2010 RESISTOR, CURRENT SENSE, OPEN AIR, STANDARD LEADS, 1 WATT
- DLA DSCC-DWG-10007-2010 RESISTOR, CURRENT SENSE, OPEN AIR, STANDARD LEADS, 3 WATT
- DLA DSCC-DWG-10008-2010 RESISTOR, CURRENT SENSE, OPEN AIR, STANDARD LEADS, 5 WATT
Korean Agency for Technology and Standards (KATS), Forging line detection
- KS D 0232-2021 Eddy current testing for steel products by using encircling coil
- KS P ISO 9584-2009(2019) Implants for surgery－Non-destructive testing－Radiographic examination of cast metallic surgical implants
Group Standards of the People's Republic of China, Forging line detection
- T/GAMA 18-2021 Laser Ultrasonic Method for Online Inspection of Metal Additively Manufactured Components
- T/GAMA 21-2021 Water immersion ultrasonic method for off-line inspection of additively manufactured metal components
- T/CES 055-2021 Guide of current measurement technology for opening and closing coils of high voltage switchgear
- T/GAMA 23-2022 Additive manufacturing Online defect detection of metal components Thermal excitation temperature response method.
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Forging line detection
- PREN 2098-5-1994 Aerospace Series Inspection and Testing Requirements for Titanium and Heat Resisting Alloy Wrought Products Part 5 - Inspection and Testing Requirements for Wires (Edition 2)
- PREN 2069-6-1994 Inspection and Testing Requirements for Steel Wrought Products Part 6 Inspection and Testing Requirements for Bars and Wires for Fasteners Aerospace Series (Edition 2)
- PREN 2098-03-1981 Inspection and Testing Requirements for Titanium and Heat Resisting Alloy Wrought Products - Part 3 - Inspection and Testing Requirements for Bars and Sections (C5/27)
- PREN 2098-01-1981 Inspection and Testing Requirements for Titanium and Heat Resisting Alloy Wrought Products - Part 1 - General Requirements (C5/27)
- PREN 2098-6-1994 Aerospace Series Inspection and Testing Requirements for Titanium and Heat Resisting Alloy Wrought Products Part 6 - Inspection and Testing Requirements for Bars and Wires for Fasteners (Edition 2)
Standard Association of Australia （SAA）, Forging line detection
- ISO 9584:2023 Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants
Japanese Industrial Standards Committee (JISC), Forging line detection
- JIS G 0568:2006 Eddy current testing method for steel products by encircling coil technique
CEN - European Committee for Standardization, Forging line detection
- PREN 17263-2018 Copper and copper alloys - Eddy current testing on the outer surface of rods@ bars@ hollow rods and wires for the detection of defects by encircling test coil
- PREN 1971-1-2019 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
Shanghai Provincial Standard of the People's Republic of China, Forging line detection
- DB31/T 840-2020 Digital subtraction angiography (DSA) X-ray equipment quality control testing specifications
- DB31/ 840-2014 Digital subtraction angiography (DSA) X-ray equipment quality control testing specifications
Tianjin Provincial Standard of the People's Republic of China, Forging line detection
- DB12/T 1005-2020 Digital subtraction angiography machine X-ray equipment quality control inspection specification
ES-UNE, Forging line detection
- UNE-EN 17263:2020 Copper and copper alloys - Eddy current testing on the outer surface of rods, bars, hollow rods and wires for the detection of defects by encircling test coil
Danish Standards Foundation, Forging line detection
- DS/EN 1971-1:2012 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
- DS/EN 3683:2007 Aerospace series - Test methods - Titanium alloy wrought products - Determination of primary a content - Point count method and line intercept method
Lithuanian Standards Office , Forging line detection
- LST EN 1971-1-2012 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
- LST EN 3683-2007 Aerospace series - Test methods - Titanium alloy wrought products - Determination of primary ? content - Point count method and line intercept method
AENOR, Forging line detection
- UNE-EN 1971-1:2012 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
Institute of Electrical and Electronics Engineers (IEEE), Forging line detection
- IEEE 2671-2022 IEEE Standard for General Requirements of Online Detection Based on Machine Vision in Intelligent Manufacturing
- IEEE Std 2671-2022 IEEE Standard for General Requirements of Online Detection Based on Machine Vision in Intelligent Manufacturing