ZH
RU
ES

Determination of Metal Coating Thickness by Microscopy

Determination of Metal Coating Thickness by Microscopy, Total:125 items.

In the international standard classification, Determination of Metal Coating Thickness by Microscopy involves: Surface treatment and coating, Linear and angular measurements, Non-ferrous metals.

Korean Agency for Technology and Standards (KATS), Determination of Metal Coating Thickness by Microscopy

KS D 8519-2009 Metallic and oxide coating-Measurement of coating thickness-Microscopical method
KS D ISO 9220-2009(2022) Metallic coatings－Measurement of coating thickness－Scanning electron microscope method
KS D ISO 9220-2009(2017) Metallic coatings－Measurement of coating thickness－Scanning electron microscope method
KS D ISO 9220:2009 Metallic coatings－Measurement of coating thickness－Scanning electron microscope method
KS D 8544-2006 Metallic coating-Measurement of coating thickness-Transmission electron microscopy method
KS D 8544-2016(2021) Metallic coating－Measurement of coating thickness－Transmission electron microscopy method
KS D 8544-2016 Metallic coating－Measurement of coating thickness－Transmission electron microscopy method
KS D 8519-2009(2015) Metallic and oxide coating－Measurement of coating thickness－Microscopical method
KS D ISO 3497:2002 Metallic coatings－Measurement of coating thickness－X-ray spectrometric methods
KS D ISO 2128:2011 Anodizing of aluminium and its alloys－Determination of thickness of anodic oxidation coatings－Non-destructive measurement by split-beam microscope

YU-JUS, Determination of Metal Coating Thickness by Microscopy

JUS C.A6.031-1990 Metal11c and oxid coatlngs. tteasurement of coatlng thickness. Hicroscopical method

European Committee for Standardization (CEN), Determination of Metal Coating Thickness by Microscopy

EN ISO 1463:1994 Metallic and Oxide Coatings - Measurement of Coating Thickness - Microscopical Method (ISO 1463 : 1982)
EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022)
prEN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021)
EN ISO 9220:1994 Metallic Coatings - Measurement of Coating Thickness - Scanning Electron Microscope Method (ISO 9220 : 1988)
EN ISO 2128:2010 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010)

International Organization for Standardization (ISO), Determination of Metal Coating Thickness by Microscopy

ISO 1463:1973 Title missing - Legacy paper document
ISO 1463:1982 Metallic and oxide coatings; Measurement of coating thickness; Microscopical method
ISO 9220:1988 Metallic coatings; measurement of coating thickness; scanning electron microscope method
ISO 1463:2021 Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
ISO 1463:2003 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
ISO 9220:2022 Metallic coatings — Measurement of coating thickness — Scanning electron microscope method
ISO 3497:1990 Metallic coatings; measurement of coating thickness; X-ray spectrometric methods
ISO 2128:2010 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
ISO 2128:1976 Anodizing of aluminium and its alloys; Determination of thickness of anodic oxide coatings; Non-destructive measurement by split-beam microscope

Danish Standards Foundation, Determination of Metal Coating Thickness by Microscopy

DS/ISO 1463:1983 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
DS/EN ISO 9220:1995 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
DS/EN ISO 1463:1994 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
DS/EN ISO 1463:2021 Metallic and oxide coatings – Measurement of coating thickness – Microscopical method (ISO 1463:2021)
DS/EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
DS/ISO 1463:2021 Metallic and oxide coatings – Measurement of coating thickness – Microscopical method
DS/ISO 14571:2020 Metallic coatings on non-metallic basis materials – Measurement of coating thickness – Micro-resistivity method
DS/EN 10318:2005 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method

Association Francaise de Normalisation, Determination of Metal Coating Thickness by Microscopy

NF A91-110:1995 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method.
NF A91-110:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method.
NF A91-110*NF EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
NF A91-108:1995 Metallic coatings. Measurement of coating thickness. Scanning electron microscope method.
NF A91-108*NF EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
NF EN ISO 9220:2022 Revêtements métalliques - Mesurage de l'épaisseur de revêtement - Méthode au microscope électronique à balayage
NF A91-116*NF EN ISO 3497:2001 Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods.
NF EN ISO 1463:2021 Revêtements métalliques et couches d'oxyde - Mesurage de l'épaisseur de revêtement - Méthode par coupe micrographique
NF A91-481*NF EN ISO 2128:2010 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
NF A91-095-1:1987 Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 1 : determination of coating thickness.
NF A91-092-1:1987 Metallic coatings. Test methods for electrodeposited silver and silver alloys coatings. Part 1 : determination of coating thickness.
NF EN ISO 2128:2010 Anodisation de l'aluminium et de ses alliages - Détermination de l'épaisseur des couches anodiques - Méthode non destructive par microscope à coupe optique

German Institute for Standardization, Determination of Metal Coating Thickness by Microscopy

DIN EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003); German version EN ISO 1463:2004
DIN EN ISO 9220:2022-05 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022); German version EN ISO 9220:2022
DIN EN ISO 9220:1995 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988); German version EN ISO 9220:1994
DIN EN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021); German and English version prEN ISO 9220:2021
DIN EN ISO 1463:2021-08 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021); German version EN ISO 1463:2021
DIN EN ISO 3497:2001 Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000); German version EN ISO 3497:2000
DIN EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021); German version EN ISO 1463:2021
DIN EN ISO 4518:1995 Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:1980); German version EN ISO 4518:1995
DIN EN 10318:2005-08 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method; German version EN 10318:2005
DIN EN ISO 2128:2010-12 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010); German version EN ISO 2128:2010

British Standards Institution (BSI), Determination of Metal Coating Thickness by Microscopy

BS EN ISO 9220:1989 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
BS EN ISO 1463:2005 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
BS EN ISO 1463:2021 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
21/30394409 DC BS ENISO 9220. Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
BS EN ISO 9220:2022 Tracked Changes. Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
20/30395419 DC BS EN ISO 1463. Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
BS EN ISO 2128:2010 Anodizing of aluminium and its alloys. Determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope

Taiwan Provincial Standard of the People's Republic of China, Determination of Metal Coating Thickness by Microscopy

CNS 12114-1987 Measurement of Metal and Oxide Coating Thickness by Microscopic Examination of A Cross Section
CNS 4161-1987 Measurement of Thickness of Metallic Coatings by the Coulometric Method
CNS 4162-1987 Measurement of Thickness of Metallic Coatings by the Jet Test Method

Lithuanian Standards Office , Determination of Metal Coating Thickness by Microscopy

LST EN ISO 9220:2001 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988)
LST EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
LST EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
LST EN 10318-2005 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method
LST EN ISO 2128:2011 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010)

AT-ON, Determination of Metal Coating Thickness by Microscopy

OENORM EN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021)
OENORM EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)

SE-SIS, Determination of Metal Coating Thickness by Microscopy

SIS SS-ISO 1463:1983 Meta I lic and oxide coatings - Measure- ment of coating thickness - Microscopi- cal method
SIS SS-ISO 9220:1989 Metallic coatings — Measurements of coating thickness — Scanning electron microscope method
SIS SMS 2953-1971 Measurement of metal and oxide coating thicknesses by microscopic examination of cross-sections
SIS SS-ISO 4524/1:1987 Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 1: Determination of coat- ing thickness
SIS SS-ISO 4522/1:1987 Metallic coatings - Test methods for electrodeposited silver and silver alloy coatings - Part 1: Determination of coat- ing thickness

ZA-SANS, Determination of Metal Coating Thickness by Microscopy

SANS 144:1982 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
SANS 144:2008 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
SANS 3497:1990 Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods

Professional Standard - Light Industry, Determination of Metal Coating Thickness by Microscopy

QB/T 3817-1999 Thickness testing method of the metal deposits and conversion coatings for the light industrial products.Metallographic microscopic method
QB/T 1912-1993 Test method for metal coating thickness of spectacle frames X-ray fluorescence spectrometry
QB/T 3822-1999 Hardness testing method of the metal deposits for the light industrial products.Microscopic hardness tester method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Determination of Metal Coating Thickness by Microscopy

GB 5929-1986 Thickness testing method of the metal deposits and conversion coatings for the light industrial products--Metallographic microscopic method
GB/T 6462-2005 Metallic and oxide coatings-Measurement of coating thinckness-Microscopical method
GB/T 6462-1986 Metallic and oxide coatings--Measurement of coating thickness--Microscopical method

ES-UNE, Determination of Metal Coating Thickness by Microscopy

UNE-EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
UNE-EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022)

CZ-CSN, Determination of Metal Coating Thickness by Microscopy

CSN ISO 1463:1993 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
CSN ISO 4522-1:1994 Metallic coatings. Test methods for electrodeposited silver and silver alloy coatings. Part 1: Determination of coating thickness

RO-ASRO, Determination of Metal Coating Thickness by Microscopy

STAS 7976-1990 Metallic coatings. Layer thickness determination by micriscopic method
STAS SR EN ISO 1463:1996 Metallic and oxide coatings - Measurement of coating thickness -Microscopical method
SR ISO 4524-1:1995 Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings. Part 1: Determination of coatings thickness
SR ISO 4522-1:1994 Metallic coatings. Test methods for electrodeposited silver and silver alloy coatings. Part 1: Determination of coating thickness

AENOR, Determination of Metal Coating Thickness by Microscopy

UNE-EN ISO 9220:1996 METALLIC COATINGS. MEASUREMENT OF COATING THICKNESS. SCANNING ELECTRON MICROSCOPE METHOD. (ISO 9220:1988).
UNE-EN ISO 1463:2005 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
UNE-EN 10318:2007 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method
UNE-EN ISO 2128:2011 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010)

CH-SNV, Determination of Metal Coating Thickness by Microscopy

SN EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
VSM 23890-1971

American Society for Testing and Materials (ASTM), Determination of Metal Coating Thickness by Microscopy

ASTM B748-90(2006) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM B748-90(1997) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM B748-90(2010) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM B748-90(2021) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM B487-20 Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
ASTM B748-90(2016) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM B748-90(2001) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM B487-85(1997) Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section
ASTM B487-85(2007) Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section
ASTM B487-85(2002) Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section
ASTM B487-85(2013) Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section

Professional Standard - Aerospace, Determination of Metal Coating Thickness by Microscopy

QJ 482-1990 Test method for microhardness of metal coatings

FI-SFS, Determination of Metal Coating Thickness by Microscopy

SFS 4071-1977

未注明发布机构, Determination of Metal Coating Thickness by Microscopy

BS EN ISO 14571:2022(2023) Metallic coatings on non - metallic basis materials — Measurement of coating thickness — Micro - resistivity method

BE-NBN, Determination of Metal Coating Thickness by Microscopy

NBN EN ISO 9220:1995 Metallic coatings - Measurement of coating thickness - Scanning électron microscope method (ISO 9220:1988)
NBN-EN ISO 1463:1995 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:1982)

NO-SN, Determination of Metal Coating Thickness by Microscopy

NS 1181-1979 Metal and oxide coating - Measurement of thickness by microscopical examination of cross-sections

PL-PKN, Determination of Metal Coating Thickness by Microscopy

PN-EN ISO 1463-2021-10 E Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method (ISO 1463:2021)

IN-BIS, Determination of Metal Coating Thickness by Microscopy

IS 12860-1989

Professional Standard - Electron, Determination of Metal Coating Thickness by Microscopy

SJ/T 11105-1996 Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings Part 1 Determination of coating thickness
SJ/T 11111-1996 Metallic coatings - Test methods for electrodeposited silver and silver alloy coatings Part 1 Determination of coating thickness

国家市场监督管理总局、中国国家标准化管理委员会, Determination of Metal Coating Thickness by Microscopy

GB/T 38783-2020 Method of coating thickness determination for precious metal composites by scanning electron microscope

VN-TCVN, Determination of Metal Coating Thickness by Microscopy

TCVN 5876-1995 Anodizing of aluminium and its alloys.Determination of thickness of anodic oxide coatings.Non.destructive measurement by split.beam microscope