ZH

RU

ES

Density national standard method

Density national standard method, Total:497 items.

In the international standard classification, Density national standard method involves: Radiation measurements, Plastics, Domestic, commercial and industrial heating appliances, Metrology and measurement in general, Measurement of volume, mass, density, viscosity, General methods of tests and analysis for food products, Crude petroleum, Waxes, bituminous materials and other petroleum products, Coals, Analytical chemistry, Medical sciences and health care facilities in general, Seals, glands, Products of the textile industry, Inorganic chemicals, Organic chemicals, Textile fibres, Petroleum products in general, Glass, Construction materials, Particle size analysis. Sieving, Farming and forestry, Natural gas, Earthworks. Excavations. Foundation construction. Underground works, Reinforced plastics, Fuels, Quality, Paints and varnishes, Leather technology, Nuclear energy engineering, Wood, sawlogs and sawn timber, Wood-based panels, Soil quality. Pedology, Raw materials for rubber and plastics, Ceramics, Materials for aerospace construction, Graphic technology, Adhesives, Air quality, Rubber, Electrical accessories, Paint coating equipment, Road engineering, Applications of information technology, Medical equipment, Water quality, Paper and board, Road vehicles in general, Non-metalliferous minerals, Cereals, pulses and derived products, Technical drawings, Pipeline components and pipelines, Mechanical testing, Products of the chemical industry, Rubber and plastics products, Interior finishing, Sacks. Bags, Shipbuilding and marine structures in general, Linear and angular measurements, Protection against crime, Pesticides and other agrochemicals, Headgear. Clothing accessories. Fastening of clothing, Wood technology processes, Refractories, Cellular materials, Packaging materials and accessories, Protection of and in buildings, Powder metallurgy, Optics and optical measurements.


RU-GOST R, Density national standard method

  • GOST 8.031-1982 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means of measuring neutron flux and its density
  • GOST 8.030-2013 State system for ensuring the uniformity of measurements. State hierarchy scheme for means measuring magnetic flux density, magnetic flux, magnetic moment and gradient of magnetic flux density
  • GOST 8.195-2013 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring spectral density of radiance, spectral density of radiant intensity, spectral density of irradiance, radiant intensity and irradiance in the wavel
  • GOST 8.576-2001 State system for ensuring the uniformity of measurements. State verification schedule for means measuring flux, flux density and fluence of electrons, energy flux, energy flux density and fluence of energy of electrons and bremsstrahlung radiation
  • GOST 8.588-2006 State system for ensuring the uniformity of measurements. State verification scheme for means of measuring of material optical density
  • GOST R 8.861-2013 State system for ensuring the uniformity of measurements. Means of measuring spectral density of radiance, spectral density of radiant intensity and spectral density of irradiance in the wavelength range of 0,2-25,0 mkm. Verification procedure
  • GOST 34721-2021 Natural gas. Determination of density by picknometric method
  • GOST 15139-1969 Plastics. Methods for the determination of density (mass density)
  • GOST R 55959-2014 Activated carbon. Standard test method for bulk density
  • GOST 23785.4-2001 Cord fabric. Method for determination of linear dimensions, density according to warp and weft, surface density
  • GOST 23785.4-1979 Cord fabric. Method for determination of linear dimensions, density according to warp and welf, surface density
  • GOST 8.595-2010 State system for ensuring the uniformity of measurements. Density and volume of petroleum. The tables of factors for recalculation of density and mass
  • GOST R 56883-2016 Biomass. Determination of bulk density by standard method
  • GOST 267-1973 Rubber. Methods for the determination of density
  • GOST 17818.8-1990 Graphite. Method for determination of density
  • GOST 22163-1976 Rice. Method of determination of density
  • GOST 24701-1981 Turf. Methods for the determination of density
  • GOST 2.701-1984 Unified system design documentation. Diagrams. Kinds and types. General requirements for fulfilment
  • GOST 8.024-2002 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring density
  • GOST 8.024-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring density of liquid
  • GOST 8.062-1985 State system for ensuring the uniformity of measurements. State special standart and state verification schedule for measuring means of hardness on Brinell scales
  • GOST R 8.830-2013 State system for ensuring the uniformity of measurements. Optical density of photomaterials. Method of measurement
  • GOST R 50203.3-1992 Smallwares. Method for determination of density
  • GOST R 8.612-2005 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the surface density of coatings in the range from 0,001 to 1,000 kg/sq m
  • GOST R 8.599-2003 State system for ensuring the uniformity of measurements. Density and volume of oil. The tables of factots for recalculation of density and mass
  • GOST 8.195-1989 State system for ensuring the uniformiry of measurements. State verification schedule for means measuring spectral density of radiance, spectral density of radiant intensity and spectral density of irradiance in the wavelength range of 0,25 - 25,00 mu; ra
  • GOST R 51069-1997 Crude petroleum and petroleum products. Determination of density, relative density and API gravity. Hydrometer method

American Society for Testing and Materials (ASTM), Density national standard method

  • ASTM D1505-03 Standard Test Method for Density of Plastics by the Density-Gradient Technique
  • ASTM D1505-10 Standard Test Method for Density of Plastics by the Density-Gradient Technique
  • ASTM D4052-09 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D4052-96 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
  • ASTM D4052-96(2002)e1 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
  • ASTM D4052-11 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D5002-99 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
  • ASTM D5002-15 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
  • ASTM D5002-99(2005) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
  • ASTM D5002-99(2010) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
  • ASTM D1505-68(1979) Standard Test Method for Density Of Plastics By The Density-Gradient Technique
  • ASTM D1505-18 Standard Test Method for Density of Plastics by the Density-Gradient Technique
  • ASTM D2320-98(2008) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
  • ASTM D2320-98(2012) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
  • ASTM D2320-98(2017) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
  • ASTM D2320-98(2022)e1 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
  • ASTM D6347/D6347M-05 Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
  • ASTM D4052-18a Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D4052-18 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D4052-16 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D6347/D6347M-05(2010) Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
  • ASTM D5002-13 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
  • ASTM D5002-16 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
  • ASTM F1315-00 Standard Test Method for Density of a Sheet Gasket Material
  • ASTM F1315-00(2006) Standard Test Method for Density of a Sheet Gasket Material
  • ASTM F1315-00(2014) Standard Test Method for Density of a Sheet Gasket Material
  • ASTM D4052-22 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D3505-96(2006) Standard Test Method for Density or Relative Density of Pure Liquid Chemicals
  • ASTM D3505-96(2000) Standard Test Method for Density or Relative Density of Pure Liquid Chemicals
  • ASTM D3505-96 Standard Test Method for Density or Relative Density of Pure Liquid Chemicals
  • ASTM D3505-18 Standard Test Method for Density or Relative Density of Pure Liquid Chemicals
  • ASTM D3505-12e1 Standard Test Method for Density or Relative Density of Pure Liquid Chemicals
  • ASTM D3505-12 Standard Test Method for Density or Relative Density of Pure Liquid Chemicals
  • ASTM D4052-15 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D6347/D6347M-99 Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
  • ASTM D6347/D6347M-05(2018) Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
  • ASTM D792-98 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
  • ASTM D792-00 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
  • ASTM D792-08 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
  • ASTM D792-13 Standard Test Methods for Density and Specific Gravity lpar;Relative Densityrpar; of Plastics by Displacement
  • ASTM D7777-12 Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
  • ASTM C729-11 Standard Test Method for Density of Glass by the Sink-Float Comparator
  • ASTM D5002-18 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
  • ASTM D5002-19 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
  • ASTM D5002-18e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
  • ASTM D5002-22 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
  • ASTM D1505-98e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
  • ASTM D1505-85(1990)e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
  • ASTM C128-07a Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
  • ASTM C128-07 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
  • ASTM C128-12 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
  • ASTM C127-12 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
  • ASTM C188-16 Standard Test Method for Density of Hydraulic Cement
  • ASTM D4254-00(2006)e1 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
  • ASTM D1480-21 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
  • ASTM D1480-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
  • ASTM C127-07 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
  • ASTM D1217-93(1998) Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
  • ASTM D1217-20 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
  • ASTM D792-20 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
  • ASTM D1217-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
  • ASTM D4254-00 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
  • ASTM D4254-00(2006) Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
  • ASTM C693-93(1998) Standard Test Method for Density of Glass by Buoyancy
  • ASTM C1162-90(2004) Standard Test Method for Loose Density of Asbestos
  • ASTM D2202-00 Standard Test Method for Slump of Sealants
  • ASTM C1162-90(2004)e1 Standard Test Method for Loose Density of Asbestos
  • ASTM C1162-90(1999) Standard Test Method for Loose Density of Asbestos
  • ASTM C693-93(2008) Standard Test Method for Density of Glass by Buoyancy
  • ASTM C693-93(2019) Standard Test Method for Density of Glass by Buoyancy
  • ASTM D5965-19 Standard Test Methods for Density of Coating Powders
  • ASTM D2346-00(2012) Standard Test Method for Apparent Density of Leather
  • ASTM C188-17 Standard Test Method for Density of Hydraulic Cement
  • ASTM D2202-00(2023) Standard Test Method for Slump of Sealants
  • ASTM D2202-00(2019) Standard Test Method for Slump of Sealants
  • ASTM D2346-21 Standard Test Method for Apparent Density of Leather
  • ASTM C1162/C1162M-90(2015) Standard Test Method for Loose Density of Asbestos
  • ASTM C188-15 Standard Test Method for Density of Hydraulic Cement
  • ASTM D2346-13 Standard Test Method for Apparent Density of Leather
  • ASTM C1162/C1162M-90(2009)e1 Standard Test Method for Loose Density of Asbestos
  • ASTM C127-04 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
  • ASTM C1770-21 Standard Test Method for ?Determination of Loose and Tapped Bulk Densities of Small Quantities of Plutonium Oxide
  • ASTM C1770-13 Standard Test Method for ???Determination of Loose and Tapped Bulk Density of Plutonium Oxide
  • ASTM D2395-17 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
  • ASTM D1657-22 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • ASTM D2395-14 Standard Test Methods for Density and Specific Gravity 40;Relative Density41; of Wood and Wood-Based Materials
  • ASTM D2395-14e1 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
  • ASTM D1415-88(1994) Standard Test Method for Rubber Property-International Hardness
  • ASTM D1513-05e1 Standard Test Method for Carbon Black, Pelleted8212;Pour Density
  • ASTM D1480-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
  • ASTM E873-82(2006) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
  • ASTM E873-82(2013) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
  • ASTM E873-82(2019) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
  • ASTM D3800-99(2004) Standard Test Method for Density of High-Modulus Fibers
  • ASTM D3800-99 Standard Test Method for Density of High-Modulus Fibers
  • ASTM C188-95 Standard Test Method for Density of Hydraulic Cement
  • ASTM D3775-02 Standard Test Method for Fabric Count of Woven Fabric
  • ASTM D3775-03 Standard Test Method for Fabric Count of Woven Fabric
  • ASTM D3775-03a Standard Test Method for Fabric Count of Woven Fabric
  • ASTM C188-95(2003) Standard Test Method for Density of Hydraulic Cement
  • ASTM D1817-01 Standard Test Method for Rubber Chemicals8212;Density
  • ASTM D1817-96 Standard Test Method for Rubber Chemicals8212;Density
  • ASTM D1817-01e1 Standard Test Method for Rubber Chemicals8212;Density
  • ASTM D1577-07 Standard Test Methods for Linear Density of Textile Fibers
  • ASTM D7305-08 Standard Test Method for Reflection Density of Printed Matter
  • ASTM D1577-01 Standard Test Methods for Linear Density of Textile Fibers
  • ASTM D1577-96 Standard Test Methods for Linear Density of Textile Fibers
  • ASTM D2346-00 Standard Test Method for Apparent Density of Leather
  • ASTM D1875-03 Standard Test Method for Density of Adhesives in Fluid Form
  • ASTM D2346-00(2004) Standard Test Method for Apparent Density of Leather
  • ASTM D1875-03(2008)e1 Standard Test Method for Density of Adhesives in Fluid Form
  • ASTM D7305-08a Standard Test Method for Reflection Density of Printed Matter
  • ASTM D2346-00(2008) Standard Test Method for Apparent Density of Leather
  • ASTM D2854-09 Standard Test Method for Apparent Density of Activated Carbon
  • ASTM C188-09 Standard Test Method for Density of Hydraulic Cement
  • ASTM D3800-99(2010) Standard Test Method for Density of High-Modulus Fibers
  • ASTM D3800M-11 Standard Test Method for Density of High-Modulus Fibers
  • ASTM D4380-84(2006) Standard Test Method for Density of Bentonitic Slurries
  • ASTM D4380-84(1993)e1 Standard Test Method for Density of Bentonitic Slurries
  • ASTM D1577-07(2012) Standard Test Methods for Linear Density of Textile Fibers
  • ASTM D7305-08a(2013) Standard Test Method for Reflection Density of Printed Matter
  • ASTM C271/C271M-16(2022)e1 Standard Test Method for Density of Sandwich Core Materials
  • ASTM D1577-07(2018) Standard Test Methods for Linear Density of Textile Fibers
  • ASTM C188-17(2023) Standard Test Method for Density of Hydraulic Cement
  • ASTM D7305-08a(2020) Standard Test Method for Reflection Density of Printed Matter
  • ASTM D3800-22 Standard Test Method for Density of High-Modulus Fibers
  • ASTM D3800-16 Standard Test Method for Density of High-Modulus Fibers
  • ASTM D4380-12 Standard Test Method for Density of Bentonitic Slurries
  • ASTM D2854-09(2019) Standard Test Method for Apparent Density of Activated Carbon
  • ASTM D1817-05(2021) Standard Test Method for Rubber Chemicals—Density
  • ASTM D1817-05(2016) Standard Test Method for Rubber Chemicals&x2014;Density
  • ASTM D1875-03(2013) Standard Test Method for Density of Adhesives in Fluid Form
  • ASTM D2591-07(2020) Standard Test Method for Linear Density of Elastomeric Yarns (Short Length Specimens)
  • ASTM D1415-88(1999) Standard Test Method for Rubber Property-International Hardness
  • ASTM D1415-05 Standard Test Method for Rubber Property8212;International Hardness
  • ASTM D1415-06 Standard Test Method for Rubber Property8212;International Hardness
  • ASTM D1415-68 Standard Test Method for International Hardness Of Vulcanized Rubber
  • ASTM D1415-06(2012) Standard Test Method for Rubber Propertymdash;International Hardness
  • ASTM D1657-12e1 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • ASTM D1657-02 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • ASTM D1217-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
  • ASTM D1657-22e1 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • ASTM D3142-97 Standard Test Method for Density of Liquid asphalts (Hydrometer Method)
  • ASTM D2591-07 Standard Test Method for Linear Density of Elastomeric Yarns (Short Length Specimens)
  • ASTM D2591-07(2013) Standard Test Method for Linear Density of Elastomeric Yarns (Short Length Specimens)
  • ASTM D6737-01(2006) Standard Test Method for Bulk Density of Tapered Paintbrush Filaments
  • ASTM D1070-03 Standard Test Methods for Relative Density of Gaseous Fuels
  • ASTM D1513-99ae1 Standard Test Method for Carbon Black, Pelleted-Pour Density
  • ASTM D5959-96(2007) Standard Test Method for Bulk Density of Level Paintbrush Filaments
  • ASTM D4380-84(2001) Standard Test Method for Density of Bentonitic Slurries
  • ASTM D1070-03(2010) Standard Test Methods for Relative Density of Gaseous Fuels
  • ASTM D1070-85(1998) Standard Test Methods for Relative Density of Gaseous Fuels
  • ASTM D2854-96(2000) Standard Test Method for Apparent Density of Activated Carbon
  • ASTM D1817-05 Standard Test Method for Rubber Chemicals8212;Density
  • ASTM D6937-04 Standard Test Method for Determining Density of Emulsified Asphalt
  • ASTM D5959-96 Standard Test Method for Bulk Density of Level Paintbrush Filaments
  • ASTM D2854-96(2004) Standard Test Method for Apparent Density of Activated Carbon
  • ASTM D6737-01 Standard Test Method for Bulk Density of Tapered Paintbrush Filaments
  • ASTM D6937-08 Standard Test Method for Determining Density of Emulsified Asphalt
  • ASTM D1817-05(2011) Standard Test Method for Rubber Chemicals—Density
  • ASTM D291/D291M-20 Standard Test Method for Bulk Density of Crushed Bituminous Coal
  • ASTM E1935-97(2013) Standard Test Method for Calibrating and Measuring CT Density
  • ASTM E1935-97(2019) Standard Test Method for Calibrating and Measuring CT Density
  • ASTM F2392-04(2010) Standard Test Method for Burst Strength of Surgical Sealants
  • ASTM F2392-04(2015) Standard Test Method for Burst Strength of Surgical Sealants
  • ASTM D6937-16 Standard Test Method for Determining Density of Emulsified Asphalt
  • ASTM D1513-05(2023) Standard Test Method for Carbon Black, Pelleted—Pour Density
  • ASTM D1070-03(2017) Standard Test Methods for Relative Density of Gaseous Fuels
  • ASTM D8171-18 Standard Test Methods for Density Determination of Flax Fiber
  • ASTM D6717-07(2018) Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
  • ASTM D4380-20 Standard Test Method for Determining Density of Construction Slurries
  • ASTM C271/C271M-16 Standard Test Method for Density of Sandwich Core Materials
  • ASTM D2854-09(2014) Standard Test Method for Apparent Density of Activated Carbon
  • ASTM D4189-07(2014) Standard Test Method for Silt Density Index 40;SDI41; of Water
  • ASTM D595-85(1997) Standard test method for paint filament distribution density
  • ASTM D7777-13 Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
  • ASTM D7777-13(2018)e1 Standard test method for measuring liquid petroleum density, relative density, or API fuel specific gravity using a portable density meter/hydrometer
  • ASTM D6822-02 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
  • ASTM D6822-12a Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
  • ASTM D6822-12 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
  • ASTM D1481-17 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
  • ASTM D6822-12b(2017) Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
  • ASTM D1415-88(2004) Standard Test Method for Rubber Property—International Hardness
  • ASTM D1415-18 Standard Test Method for Rubber Property—International Hardness
  • ASTM D4564-02a Standard Test Method for Density of Soil in Place by the Sleeve Method
  • ASTM D4564-02 Standard Test Method for Density of Soil in Place by the Sleeve Method
  • ASTM D2937-00e1 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
  • ASTM D4892-89(1999)e1 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
  • ASTM D4892-14(2019)e1 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
  • ASTM D8188-18 Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)
  • ASTM D5931-20 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
  • ASTM D1480-02e1 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
  • ASTM D1480-02 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
  • ASTM D1657-12 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • ASTM D1657-12(2017) Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • ASTM D4254-14 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
  • ASTM D4254-16 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
  • ASTM D1480-07 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
  • ASTM C167-22 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
  • ASTM C29/C29M-09 Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate
  • ASTM D1122-16 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
  • ASTM D1122-16(2017)e1 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
  • ASTM C729-75(1995)e1 Standard Test Method for Density of Glass by the Sink-Float Comparator
  • ASTM C567-00 Standard Test Method for Determining Density of Structural Lightweight Concrete
  • ASTM D4189-07 Standard Test Method for Silt Density Index (SDI) of Water
  • ASTM D1513-05 Standard Test Method for Carbon Black, Pelleted8212;Pour Density
  • ASTM D1513-99a(2004) Standard Test Method for Carbon Black, Pelleted8212;Pour Density
  • ASTM D1513-04 Standard Test Method for Carbon Black, Pelleted8212;Pour Density
  • ASTM C729-75(2000) Standard Test Method for Density of Glass by the Sink-Float Comparator
  • ASTM D418-82 Standard Methods of Testing Pile Yarn Floor Covering Construction
  • ASTM D4189-95(2002) Standard Test Method for Silt Density Index (SDI) of Water
  • ASTM D4189-95 Standard Test Method for Silt Density Index (SDI) of Water
  • ASTM F1574-03a(2009) Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
  • ASTM D1513-05e2 Standard Test Method for Carbon Black, Pelleted&8212;Pour Density
  • ASTM D1907-01 Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
  • ASTM F88-05 Standard Test Method for Seal Strength of Flexible Barrier Materials
  • ASTM D1907-97 Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
  • ASTM D1907/D1907M-12(2018) Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
  • ASTM D1513-05(2012) Standard Test Method for Carbon Black, Pelletedmdash;Pour Density
  • ASTM D5959-12 Standard Test Method for Bulk Density of Level Paintbrush Filaments
  • ASTM D1875-03(2018) Standard Test Method for Density of Adhesives in Fluid Form
  • ASTM C188-14 Standard Test Method for Density of Hydraulic Cement
  • ASTM C729-11(2016) Standard Test Method for Density of Glass by the Sink-Float Comparator
  • ASTM D4784-93(2015) Standard Specification for LNG Density Calculation Models
  • ASTM D4784-93(2010) Standard for LNG Density Calculation Models
  • ASTM D8007-15e1 Standard Test Method for Wale and Course Count of Weft Knitted Fabrics
  • ASTM D7042-16 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D2937-00 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
  • ASTM D1875-95 Standard Test Method for Density of Adhesives in Fluid Form
  • ASTM D2937-04 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
  • ASTM D4564-93 Standard Test Method for Density of Soil in Place by the Sleeve Method
  • ASTM D2937-10 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
  • ASTM D5931-13 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
  • ASTM D5931-13(2017) Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
  • ASTM C167-18 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
  • ASTM C1754/C1754M-12 Standard Test Method for Density and Void Content of Hardened Pervious Concrete
  • ASTM D1298-12b(2017)e1 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • ASTM D3142/D3142M-11 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
  • ASTM D1657-02(2007) Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • ASTM C782-99 Standard Test Method for Softness of Preformed Tape Sealants
  • ASTM D2156-65(1970) Standard Test Method for Smoke Density In The Flue Gases From Distillate Fuels
  • ASTM C908-00 Standard Test Method for Yield Strength of Preformed Tape Sealants
  • ASTM C357-07 Standard Test Method for Bulk Density of Granular Refractory Materials
  • ASTM F88-00 Standard Test Method for Seal Strength of Flexible Barrier Materials
  • ASTM C908-00(2006) Standard Test Method for Yield Strength of Preformed Tape Sealants
  • ASTM D1622-03 Standard Test Method for Apparent Density of Rigid Cellular Plastics
  • ASTM C357-07(2009)e1 Standard Test Method for Bulk Density of Granular Refractory Materials
  • ASTM C908-00(2011) Standard Test Method for Yield Strength of Preformed Tape Sealants
  • ASTM C782-03(2009) Standard Test Method for Softness of Preformed Tape Sealants
  • ASTM C782-03 Standard Test Method for Softness of Preformed Tape Sealants
  • ASTM C357-07(2022) Standard Test Method for Bulk Density of Granular Refractory Materials
  • ASTM F88/F88M-15 Standard Test Method for Seal Strength of Flexible Barrier Materials
  • ASTM F88/F88M-21 Standard Test Method for Seal Strength of Flexible Barrier Materials
  • ASTM C520-15(2020) Standard Test Methods for Density of Granular Loose Fill Insulations
  • ASTM C782-13(2018) Standard Test Method for Softness of Preformed Tape Sealants
  • ASTM D1622-20 Standard Test Method for Apparent Density of Rigid Cellular Plastics
  • ASTM D1513-05(2017) Standard Test Method for Carbon Black, Pelleted—Pour Density
  • ASTM C357-07(2022)e1 Standard Test Method for Bulk Density of Granular Refractory Materials
  • ASTM D6737-12 Standard Test Method for Bulk Density of Tapered Paintbrush Filaments
  • ASTM C693-93(2013) Standard Test Method for Density of Glass by Buoyancy
  • ASTM C520-15 Standard Test Methods for Density of Granular Loose Fill Insulations
  • ASTM F88/F88M-23 Standard Test Method for Seal Strength of Flexible Barrier Materials
  • ASTM D70-17 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)
  • ASTM D6822-12b(2017)e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
  • ASTM D6752/D6752M-11 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
  • ASTM C167-98 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
  • ASTM C167-98(2003) Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
  • ASTM B311-08 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
  • ASTM C642-13 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
  • ASTM B311-13 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
  • ASTM C167-15 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
  • ASTM D8188-23 Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)
  • ASTM D1122-20 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
  • ASTM D7830/D7830M-14(2021)e1 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge

American National Standards Institute (ANSI), Density national standard method

  • ANSI Z83.19a-2010 American National Standard/CSA Standard for Gas-Fired High Intensity Infrared Heaters, same as CSA 2.35a
  • ANSI/IEEE C12.7:1993 American National Standard Requirements for Watthour Meter Sockets
  • ANSI/ISEA 107-2020 American National Standard for High-Visibility Safety Apparel
  • ANSI/ASTM D792:2000 Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement (08.01)
  • ANSI/NCSL Z540.2-1997 American National Standard for Expressing Uncertainty - U.S. Guide to the Expression of Uncertainty in Measurement

TH-TISI, Density national standard method

  • TIS 1182.3-1994 Standard test methods for petroleum and petroleum products.part 3: determination of density, relative density or api gravity.hydrometer method
  • TIS 1353.7-1998 Standard test methods for paper and paper board.part 7:determination of thickness and apparent bulk density or apparent sheet density
  • TIS 1182 Pt.3-1994 STANDARD TEST METHODS FOR PETROLEUM AND PETROLEUM PRODUCTS.PART 3 DETERMINATION OF DENSITY,RELATIVE DENSITY OR API GRAVITY-HYDROMETER METHOD

VN-TCVN, Density national standard method

  • TCVN 6594-2007 Crude petroleum and liquid petroleum products.Determination of density, relative density (specific gravity), or API gravity.Hydrometer method
  • TCVN 6910-3-2001 Accuracy (Trueness and precision) of measurement methods and results.Part 3: Intermediate measures of the precision of a standard measurement method
  • TCVN 6910-5-2002 Accuracy (trueness and precision) of measurement methods and results.Part 5: Alternative methods for the determination of the precision of a standard measurement method
  • TCVN 4181-2009 Standard test methods for linear density of textile fibers
  • TCVN 6039-2-2008 Plastics.Methods for determining the density of non.cellular plastics.Part 2: Density gradient column method

National Health Commission of the People's Republic of China, Density national standard method

  • GB 5009.2-2016 Determination of Relative Density of Food in National Food Safety Standard

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Density national standard method

  • GB 5413.33-2010 National food safety standard Determination of specific gravity in raw milk
  • GB/T 1033-1986 Test method for density and relative density of plastics
  • GB/T 6379.3-2012 Accuracy(trueness and precision) of measurement methods and results.Part 3:Intermediate measures of the precision of a standard measurement method
  • GB/T 6379.5-2006 Accuracy (trueness and precision)of measurement methods and results-Part 5:alternative methods for the determination of the precision of a standard measurement method
  • GB/T 29617-2013 Determination of density,relative density,and API gravity of liquids by digital density meter
  • GB/T 22308-2008 Standard test method for density of a sheet gasket material
  • GB/T 1463-1988 Test methods for density and relative density of fiber reinforced plastics
  • GB/T 1463-2005 Test methods for density and relative density of fiber reinforced plastics
  • GB/T 1884-2000 Crude petroleum and liquid petroleum products--Laboratory determination of density--Hydrometer method
  • GB/T 208-2014 Test method for determinging cement density
  • GB/T 32776-2016 Test method of density for pesticides
  • GB/T 208-1994 Standard test method for cement density
  • GB/T 1933-1991 Method for determination of the density of wood
  • GB/T 1933-2009 Method for determination of the density of wood
  • GB/T 1033.2-2010 Plastics.Methods for determining the density of non-cellular plastics.Part 2:Density gradient column method

Taiwan Provincial Standard of the People's Republic of China, Density national standard method

  • CNS 7735-1981 Method of Test for Density of Plastics by the Density - Gradient Technique
  • CNS 11121-1984 Method for Determination of True Relative Density, Apparent Relative Density and Porosity of Coke
  • CNS 14474-2000 Method of test for density and relative density of liquids by digital density meter
  • CNS 90-1991 Format and Dimensions of Paper Used for Chinese National Standards
  • CNS 451-2005 Wood - Determination of density for physical and mechanical tests
  • CNS 14314-1999 Method of test for particle density of fine ceramic powder

Military Standard of the People's Republic of China-General Armament Department, Density national standard method

  • GJB 209-1986 Gunpowder Density Determination (Density Bottle Method)
  • GJB 8683.2-2015 Test methods for physical parameters of pyrotechnics Part 2: Density determination density bottle method

Professional Standard - Hygiene , Density national standard method

Canadian General Standards Board (CGSB), Density national standard method

FI-SFS, Density national standard method

Xinjiang Provincial Standard of the People's Republic of China, Density national standard method

  • 新Q 1401-1986 Wool Density Determination Method--Pile Density Method
  • DB65/T 2217.3-2005 The breeding technical standard of fine.wool sheep The third section:The density of wool determines the method.Law of density of wool

Professional Standard - Petrochemical Industry, Density national standard method

  • SH/T 0221-1992 Liquefied Petroleum Gas Density or Relative Density Determination (Pressure Densitometer Method)
  • SH/T 0685-1999 Liquified petroleum gases.Determination of density.Pressure density bottle method
  • SH/T 0068-2002 Determination of density or relative density of engine coolant and its concentrate (densitometer method)

Group Standards of the People's Republic of China, Density national standard method

  • T/GXAS 010-2018 Determination of Density and Relative Density of Gum Turpentine by Densitometer Method
  • T/SCS 000026-2023 Determination of density and linear density of ceramic fibre

Professional Standard - Building Materials, Density national standard method

British Standards Institution (BSI), Density national standard method

  • BS ISO 18747-1:2018 Determination of particle density by sedimentation methods - Isopycnic interpolation approach
  • BS EN ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Density gradient column method
  • BS EN ISO 1183-2:2019 Tracked Changes. Plastics. Methods for determining the density of non-cellular plastics. Density gradient column method
  • BS ISO 18747-2:2019 Determination of particle density by sedimentation methods - Multi-velocity approach
  • BS ISO 7267-1:2009 Rubber-covered rollers. Determination of apparent hardness. IRHD method
  • BS ISO 7267-1:2008 Rubber-covered rollers - Determination of apparent hardness - IRHD method
  • BS ISO 7267-1:2017 Rubber-covered rollers. Determination of apparent hardness. IRHD method
  • BS 2782-6 Methods 620A to 620D:1991 Methods of testing plastics. Dimensional properties. Determination of density and relative density of non-cellular plastics. Methods 620A to 620D:Determination of density and relative density of non-cellular plastics
  • BS 1643:2008 Specification for precision vernier height gauges
  • BS 1643:1983 Specification for precision vernier height gauges
  • BS ISO 5725-3:1995 Accuracy (trueness and precision) of measurement methods and results. Intermediate measures of the precision of a standard measurement method
  • BS EN ISO 3993:1996 Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method
  • BS ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method

Standard Association of Australia (SAA), Density national standard method

Professional Standard - Agriculture, Density national standard method

  • GB 1033-1986 Test methods for density and relative density of plastics
  • 128药典 四部-2020 0900 Property Inspection Method 0993 Bulk Density and Tap Density Determination Method

Professional Standard - Pharmaceutical Packaging, Density national standard method

The American Road & Transportation Builders Association, Density national standard method

  • AASHTO T 133-2011 Standard Method of Test for Density of Hydraulic Cement
  • AASHTO T 133-2016 Standard Method of Test for Density of Hydraulic Cement
  • AASHTO T 191-2014 Standard Method of Test for Density of Soil In-Place by the Sand-Cone Method
  • AASHTO T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
  • AASHTO T 355-2015 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods

AASHTO - American Association of State Highway and Transportation Officials, Density national standard method

  • T 133-2011 Standard Method of Test for Density of Hydraulic Cement
  • T 133-2019 Standard Method of Test for Density of Hydraulic Cement
  • T 133-2016 Standard Method of Test for Density of Hydraulic Cement
  • T 191-2002 Standard Method of Test for Density of Soil In-Place by the Sand-Cone Method
  • T 191-2014 Standard Method of Test for Density of Soil In-Place by the Sand-Cone Method
  • TP24-1994 Standard Test Method for Determining the Density of Freshly Mixed Concrete in Place Using a Twin-Probe Nuclear Density Gauge
  • T 133-1991 Standard Method of Test for Density of Hydraulic Cement (ASTM C188-89)
  • T204-1990 Standard Method of Test for Density of Soil in-Place by the Drive Cylinder Method
  • T 227-2002 Standard Method of Test for Density@ Relative Density (Specific Gravity)@ or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • T 355-2018 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods
  • T 355-2015 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods
  • T 355-2016 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods

Korean Agency for Technology and Standards (KATS), Density national standard method

  • KS F 2593-2014 Standard test method for moisture density of soil
  • KS M 2002-2011 Crude petroleum and liquid petroleum products-Laboratory determination of density-Hydrometer method
  • KS M 2002-1986 Crude petroleum and liquid petroleum products-Laboratory determination of density-Hydrometer method
  • KS A ISO 5725-3-2012(2017) Accuracy(trueness and precision) of measurement methods and results-Part 3:lntermediate measures of the precision of a standard measurement method
  • KS M 0004-2017 Test methods for density and relative density of chemical products
  • KS M 0004-2019 Test methods for density and relative density of chemical products
  • KS M ISO 1183-2:2014 Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
  • KS F 2504-2014 Standard test method for density and absorption of fine aggregates
  • KS F 2503-2014 Standard test method for density and absorption of coarse aggregate
  • KS F 2593-2019 Standard test method for moisture density of soil
  • KS M ISO 1183-2-2014(2019) Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
  • KS F 2345-2014 Standard test method for relative density of cohesionless soils
  • KS F 2397-2005 Standard test method for density of drained asphalt mixtures
  • KS F 2397-2013 Standard test method for density of drained asphalt mixtures
  • KS F 2462-2021 Standard test method for density of structural light weight concrete
  • KS F 2503-2019 Standard test method for density and water absorption of coarse aggregates
  • KS F 2345-2019 Standard test method for relative density of cohesionless soils
  • KS F 2308-2006 Test method for density of soil particles
  • KS F 2308-1986 Test method for density of soil particles
  • KS F 2518-2020 Standard test method for density and water absorption rate of natural stone
  • KS M ISO 1183-2006(2011) Plastics-Methods for determining the density and relative density of non-cellular plastics
  • KS F 2465-2021 Standard test method for thickness and density of blanket or batt-type thermal insulation materials

Acoustical Society of America (ASA), Density national standard method

  • ASA S3.2-2020 AMERICAN NATIONAL STANDARD Method for Measuring the Intelligibility of Speech over Communication Systems
  • ASA S1.22-2021 AMERICAN NATIONAL STANDARD Scales and sizes for plotting frequency characteristics and polar diagrams (a nationally adopted international standard)

International Organization for Standardization (ISO), Density national standard method

  • ISO/IEC Guide 21:1981/Add 1:1983 Indication of the degree of equivalence between national standards and international standards; addendum 1
  • ISO/AWI 5725-5 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
  • ISO/CD 5725-5:2023 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
  • ISO 18747-1:2018 Determination of particle density by sedimentation methods - Part 1: Isopycnic interpolation approach
  • ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method
  • ISO 1183-2:2019 Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
  • ISO 3675:1993 Crude pertroleum and liquid petroleum products; laboratory determination of density or relative density; hydrometer method

Danish Standards Foundation, Density national standard method

  • DS/ISO 5725-5/Corr. 1:2005 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
  • DS/ISO 5725-5:2000 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
  • DS/ISO 5725-3/Corr.1:2002 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method
  • DS/EN ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method

German Institute for Standardization, Density national standard method

  • DIN ISO 5725-5:2002-11 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998)
  • DIN ISO 5725-3:2003 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method (ISO 5725-3:1994 including Technical Corrigendum 1:2001)
  • DIN 66137-2:2019-03 Determination of solid state density - Part 2: Gaspycnometry
  • DIN EN ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004); German version EN ISO 1183-2:2004
  • DIN EN ISO 1183-2:2019-06 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2019); German version EN ISO 1183-2:2019
  • DIN ISO 5725-5 Berichtigung 1:2006 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998), Corrigenda to DIN ISO 5725-5:2002-11 (ISO 5725-5:1998/Cor. 1:2005
  • DIN 52102:2013-10 Test methods for aggregates - Determination of dry bulk density by the cylinder method and calculation of the ratio of density

Professional Standard - Commodity Inspection, Density national standard method

  • SN/T 2383-2009 Liquid chemical products.Determination of density and relative density.Digital density meter method

国家质量监督检验检疫总局, Density national standard method

  • SN/T 2383-2017 Liquid chemical products.Determination of density and relative density.Digital density meter method

未注明发布机构, Density national standard method

  • BS ISO 5725-3:1994(2002) Accuracy (trueness and precision) of measurement methods and results — Part 3 : Intermediate measures of the precision of a standard measurement method
  • BS 1643:2008(2009) Specification for precision vernier height gauges

Japanese Industrial Standards Committee (JISC), Density national standard method

  • JIS B 9929:2006 Standard for measuring methods of airborne ion density
  • JIS K 0061:2022 Test methods for density and relative density of chemical products
  • JIS K 0061:2001 Test methods for density and relative density of chemical products
  • JIS Z 8837:2018 Determination of density by volumetric displacement -- Skeleton density by gas pycnometry
  • JIS K 7112-2:2023 Plastics -- Methods for determining the density of non-cellular plastics -- Part 2: Density gradient column method
  • JIS K 0061 ERRATUM 1:2001 Test methods for density and relative density of chemical products (Erratum 1)
  • JIS K 7605:1976 Method for determining photographic density
  • JIS K 7112:1999 Plastics -- Methods of determining the density and relative density of non-cellular plastics

HU-MSZT, Density national standard method

ZA-SANS, Density national standard method

  • SANS 5905:1978 Bulk density of dense refractory bricks (mercury balance method)
  • SANS 5906:1978 Bulk density, bulk volume, apparent porosity, and apparent relative density of dense refractory bricks (evacuation method)

AENOR, Density national standard method

  • UNE 84174:1995 ESSENTIAL OILS. EVALUATION OF THE ABSOLUTE AND RELATIVE DENSITY OF ESSENTIAL OILS. (ELECTRONIC DENSITYMETER METHOD).

API - American Petroleum Institute, Density national standard method

  • API MPMS 9.2-2003 Manual of Petroleum Measurement Standards Chapter 9—Density Determination Section 2—Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer (Second Edition)
  • API MPMS 9.2-1982 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 2 - Pressure Hydrometer Test Method for Density or Relative Density (First Edition)
  • API MPMS 9.1-2002 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 1 - Standard Test Method for Density@ Relative Density (Specific Gravity)@ or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method (Second Edi
  • API MPMS 9.3-2002 Manual of Petroleum Measurement Standards Chapter 9—Density Determination Section 3—Standard Test Method for Density@ Relative Density@ and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method (Second Edition)

Hebei Provincial Standard of the People's Republic of China, Density national standard method

  • DB13/T 1231-2010 Density Determination Method for Chemical Products Intelligent Liquid Density Meter Method

CZ-CSN, Density national standard method

Association Francaise de Normalisation, Density national standard method

  • NF T30-120:1974 PAINTS. DETERMINATION OF FILM THICKNESS. SUMMARY OF FRENCH STANDARDS.
  • NF T51-037-2:2005 Plastics - Methods for determining the density of non-cellular plastics - Part 2 : density gradient column method.
  • NF T51-037-2*NF EN ISO 1183-2:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 2 : density gradient column method
  • NF V03-719-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2 : method of traceability for measuring instruments through reference to the international standard instrument.
  • NF EN ISO 7971-2:2019 Céréales - Détermination de la masse volumique, dite masse à l'hectolitre - Partie 2 : méthode de raccordement des instruments de mesure à l'étalon international
  • NF M41-008*NF EN ISO 3993:1995 Liquefield petroleum gas and light hydrocarbons. Determination of density or relative density. Pressure hydrometer method.
  • NF X31-502:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente - Densitomètre à membrane.
  • NF P98-643:1993 Horizontal road signs. Road markings. Separating method of glass particles in marking products : dense liquid method.

YU-JUS, Density national standard method

  • JUS B.B8.032-1980 Testing of natural stone. Determination of bulk density, density, coefficient of density, and porosity
  • JUS C.A2.028-1978 Metallic powders - determination ofapparent density by cup andfunnel method

CEN - European Committee for Standardization, Density national standard method

  • EN ISO 1183-2:2019 Plastics - Methods for determining the density of noncellular plastics - Part 2: Density gradient column method

ES-UNE, Density national standard method

  • UNE-EN ISO 1183-2:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2019)

PL-PKN, Density national standard method

  • PN C89035-1992 Plastics. Methods for determining the density and relative density of non-cellular plastics
  • PN BN 7439-04-1965 Reproduction photography Test methods The marking of optical density
  • PN C99464-01-1992 Photography Density measurements Terms, symbols and notations

国家林业和草原局, Density national standard method

  • LY/T 3256-2021 Determination of basic wood density of national dominant tree species (groups)

CU-NC, Density national standard method

Institute of Electrical and Electronics Engineers (IEEE), Density national standard method

Professional Standard - Petroleum, Density national standard method

GOSTR, Density national standard method

  • GOST R 57844-2017 Composites. Determination of density by volumetric displacement - skeleton density by gas pycnometry

Indonesia Standards, Density national standard method

Professional Standard - Aviation, Density national standard method

  • HB 5367.7-1986 Method for Determination of Density of Carbon Graphite Sealing Materials
  • HB 5377-1987 Test method for density of liquid gaskets for aviation

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Density national standard method

  • GJB/J 5899-2006 Specification for certified reference materials of smoke density
  • GJB 5382.2-2005 Test methods of physical parameter for pyrotechnic. Part 2: Determination of density. Pyknometer method

SE-SIS, Density national standard method

BE-NBN, Density national standard method

  • NBN-ISO 3993:1991 Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method
  • NBN T 40-102-1988 Plastics - Methods for determining the density and relative density of non-cellular plastics

KR-KS, Density national standard method

  • KS F 2371-2022 Standard test method for bulk density of granular insulations

RO-ASRO, Density national standard method

  • STAS SR ISO 1183:1994 Plastics - Methods for determining the density and relative density of non-cellular plastics

TR-TSE, Density national standard method

  • TS 1818-1975 METHODS FOR DETERMINING THE DENSITY AND RELAT?VE DENSITY (SPECIFIC GRAVITY) OF PLASTICS EXCLUDING CEL?. Ul.AR PLASTICS

Sichuan Provincial Standard of the People's Republic of China, Density national standard method

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Density national standard method

  • JEDEC JESD63-1998 Standard Method for Calculating the Electromigration Model Parameters for Current Density and Temperature

Professional Standard - Machinery, Density national standard method

  • JB/T 10549-2006 Common specification for SF gas density relay and density meter




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved