ZH
RU
ES

Preparation method of three electrodes

Preparation method of three electrodes, Total:323 items.

In the international standard classification, Preparation method of three electrodes involves: Electronic tubes, Semiconductor devices, Analytical chemistry, Optoelectronics. Laser equipment, Testing of metals, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Products of the chemical industry, Galvanic cells and batteries, Electromagnetic compatibility (EMC), Lamps and related equipment, Surface treatment and coating, Insulating fluids, Products of non-ferrous metals, Non-ferrous metals, Radiocommunications, Kitchen equipment, Fluid power systems, Road vehicle systems, Nuclear energy engineering, Printed circuits and boards, Physics. Chemistry, Equipment for the chemical industry, Equipment for petroleum and natural gas industries, Fluid storage devices, Optical equipment, Waxes, bituminous materials and other petroleum products, Electrical and electronic testing, Shipbuilding and marine structures in general, Edible oils and fats. Oilseeds, Milk and milk products, Meat, meat products and other animal produce, Graphic technology, Electricity. Magnetism. Electrical and magnetic measurements, Domestic, commercial and industrial heating appliances, Insulating materials, Telecommunications in general, Information technology (IT) in general, Welding, brazing and soldering, Power stations in general, Iron and steel products, Switchgear and controlgear, Electrical accessories, Radiation protection, Protective equipment, Mechanical structures for electronic equipment, Transformers. Reactors, Rectifiers. Convertors. Stabilized power supply, Adhesives, Protection against fire, Alarm and warning systems, Ceramics, Flexible drives and transmissions, Rubber and plastics products, Telecommunication systems, Audio, video and audiovisual engineering.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Preparation method of three electrodes

GB/T 3789.23-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid No3 control ability
GB/T 26812-2011 Preparation method of reference solutions for the measurement of ion selective electrodes
GB/T 3789.11-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid No3 cut-off voltage
GB/T 17366-1998 Methods of mineral and rock specimen preparation for EPMA
GB/T 27503-2011 Test solutions of electrolytic conductivity analyzer.Preparation method of sodium chloride solutions
GB/T 17365-1998 Method of preparation for samples of metal and alloy in electron probe microanalysis
GB 11299.13-1989 Satellite Communication Earth Station Radio Equipment Measurement Methods Part 3 Subsystem Combination Measurements Section 3 Frequency Division Multiplexed Transmission Measurements
GB/T 14048.17-2008 Low-voltage switchgear and controlgear.Part 5-4:Control circuit devices and switching elements.Method of assessing the performance of low-formance of low-energy contacts.Special tests
GB/T 26256-2010 Mutual interference limitation and coexistence requirements and test methods for radio communication equipment in the 2.4GHz frequency band

RU-GOST R, Preparation method of three electrodes

GOST 19138.2-1985 Triode thyristors. Method for measuring trigger direct and peak gate current and trigger direct and peak gate voltage
GOST 21107.9-1976 Gas-discharge devices. Methods of measurement of electrial parameters of pulse thyratrons
GOST 21107.13-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for pulsed thyratrons and gas-filled rectifiers
GOST 21107.10-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for glow-discharge thyratrons and gas-filled rectifiers
GOST 21106.6-1977 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Measurement methods of currents of anode and grids, having positive voltage relative to cathode and zero anode and grids currents
GOST 18485-1973 Modulator tubes for operation in pulse conditions. Methods for measurement of electrodes pulse voltages
GOST 21106.7-1977 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Method of measurement of cathode current
GOST 21106.9-1977 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Method of measurements of pulse anode and grids currents
GOST 21106.12-1977 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Method of measurement of leakage currents between electrodes and between cathode and heater
GOST 21106.10-1977 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Methods of measurements of reverse control grid and anode currents
GOST 21106.13-1978 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Methods of measurement of direct interelectrode capacitances
GOST 21106.11-1977 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Methods of measurements of thermionic control grid current
GOST 21106.5-1977 Oscillator, modulator and regulation tubes; anode dissipated power more than 25 W. Methods of measurement of filament current and voltage
GOST 19438.4-1974 Low-power electronic tubes. Methods of measurement of current of control grids
GOST 21106.8-1977 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Methods of measurements of cathode emission
GOST 30587-1998 Electrically operated household food preparation appliances. Measuring methods of operating characteristics
GOST 21106.4-1976 Modulator flash tubes with anode dissipation above 25 W. Method of electric strength test
GOST 21106.0-1975 Oscillator, modulator and regulation tubes anode dissipated power more than 25 W. Method of measurements of electrical parameters. General principles
GOST 21106.1-1975 Oscillator, modulator and regulation tubes; anode dissipated power more than 25 W. Test method for multiple switching on and switching off the heating voltage
GOST CISPR 15-2014 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
GOST R 56962-2016 Fish, non-fish objects and products from them. Method for determination of residual content of triphenylmethane dyes using ultra performance liquid chromatography-quadrupole-time-of-flight mass spectrometry
GOST R 59463-2021 Nanomanufacturing. Key control characteristics. Part4-6. Electrode nanomaterials for electric energy storage devices. Determination of carbon content by infrared spectroscopy
GOST R 51317.3.4-2006 Electromagnetic compatibility of technical equipment. Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A. Limits and test methods
GOST R 51522-1999 Electromagnetic compatibilyty of technical equipment. Electrical equipment for measurement, control and laboratory use. Requirements and test methods
GOST R 51317.3.2-1999 Electomagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current < 16 A per phase). Limits and test methods
GOST R 51317.3.5-2006 Electromagnetic compatibility of technical equipment. Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A. Limits and test methods
GOST R 51318.15-1999 Electromagnetic compatibility of technical equipment. Radio disturbance from electrical lighting and similar equipment. Limits and test methods
GOST R 51318.22-1999 Electomagnetic compatibility of technical equipment. Man-made radio disturbance from information technology equipment. Limits and test methods
GOST R 51317.3.2-2006 Electromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <=16 A per phase). Limits and test methods
GOST 21106.16-1979 Oscillator tubes with anode dissipated power above 25 W. Measurement methods of power, input voltage and determination frequency characteristics
GOST R 59465-2021 Nanomanufacturing. Key control characteristics. Part 4-8. Electrode nanomaterials for electrical energy storage devices. Determination of water content by Karl Fischer coulometric titration
GOST 21106.14-1978 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Methods of cut-off voltage (bias), trans. Conductance and amplification factor measurements
GOST IEC/TS 61000-3-5-2013 Electromagnetic compatibility of technical equipment. Limitation of voltage fluctuation and flicker, caused by technical equipment with rated current greater than 75 A connected to low-voltage power supply systems. Limits and test methods
GOST 12.4.172-1987 Occupational safety standards system. Individual screen set for protection from power frequency fields. General technical requirements and methods of control
GOST R 51527-1999 Electromagnetic compatibility of technical equipment. Stabilized power supplies, d.c.output. Conducted electromagnetic interference. Limits and test methods
GOST IEC 60947-5-4-2014 Low-voltage switchgear and controlgear. Part 5-4. Control circuit devices and switching elements. Method of assessing the performance of low-energy contacts. Special tests
GOST R 50657-1994 Electromagnetic compatibility of radioelectronic equipment. Radio transmitting devices of all types and purposes for national economic use. Limits for frequency tolerances. Measuring and monitoring methods
GOST 29157-1991 Electromagnetic compatibility of technical means. Vehicle electrical equipment. Disturbances in control and signal lines on board vehicle. Requirements and test methods
GOST 32135-2013 Electromagnetic compatibility of technical equipment. Emission from audio, video, audiovisual and entertainment lighting control apparatus for professional use. Limits and test methods
GOST R 51317.3.12-2006 Electromagnetic compatibility of technical equipment. Limitation of harmonic currents produced by equipment with input current greater than 16A and not greater than 75 A per phase connected to public low-voltage supply systems. Limits and test methods
GOST R 51318.11-1999 Electromagnetic compatibility of technical equipment. Radio disturbance from industrial, scientific, medical and domestic (ISMD) radio-frequency equipment. Limits and test methods
GOST R 51522.1-2011 Electromagnetic compatibility of technical equipment. Electrical equipment for measurement, control and laboratory use. Part 1. General requirements and test methods
GOST R EN 50194-2008 Electrical apparatus for the detection of combustible gases in domestic premises. General requirements and control methods
GOST 24848.2-1981 Variator V-belts for industrial equipment. Specifications
GOST R 50745-1995 Electromagnetic compatibility of technical equipment. Uninterrupted power supply systems of a.c. receivers and pulse interference suppression equipment for power supply networks. Technical requirements and test methods
GOST 30804.3.3-2013 Electromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test met
GOST R 51523-1999 Electromagnetic compatibility of technical equipment. Emission from audio, video, audiovisual and entertainment lighting control apparatus for professional use. Limits and test methods

Professional Standard - Electron, Preparation method of three electrodes

SJ 2214.6-1982 Method of measurement for collector-emitter reverse breakdown voltage of semiconductor phototransistors
SJ 2214.8-1982 Method of measurement for dark current voltage of semiconductor phototransistors
SJ 2214.10-1982 Method of measurement for light current of semiconductor photodiodes and phototransistors
SJ 2215.9-1982 Method of measurement for reverse cut-off current of semiconductor photocouplers transistors
SJ/Z 9096.3-1987 Method of measurement for radio transmitter Part 3: Wanted and unwanted modulation
SJ/Z 9094.12-1987 Methods of measurement for equipmemt used in terrestrial radio-relay systems--Part 3: Simulated systems--Section 3: Measurements for monochrome and colour television transmission
SJ/Z 9094.10-1987 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 3: Simulated systems
SJ/Z 9094.11-1987 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 3: Simulated systems--Section 2: Measurements of baseband
SJ/Z 9094.14-1987 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 3: Simulated systems--Section 5: Measurement of mutual interference
SJ/Z 9094.4-1987 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 2: Measurements for sub-systems--Section 3: R.F.branching networks

American Society for Testing and Materials (ASTM), Preparation method of three electrodes

ASTM E81-96(2007) Standard Test Method for Preparing Quantitative Pole Figures
ASTM E81-96(2011) Standard Test Method for Preparing Quantitative Pole Figures
ASTM G5-13e2 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM G5-13 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM G5-94(2011)e1 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM F1113-87(1999) Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
ASTM D1816-97 Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Using VDE Electrodes
ASTM G97-97(2002)e1 Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
ASTM G97-97 Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
ASTM E3324-22 Standard Test Method for Lipid Quantitation in Liposomal Formulations Using Ultra-High-Performance Liquid Chromatography (UHPLC) with Triple Quadrupole Mass Spectrometry (TQMS)
ASTM C1165-90(2005) Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H₂SO₄ at a Platinum Working Electrode
ASTM C1165-90(2000)e1 Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H₂SO₄ at a Platinum Working Electrode
ASTM C1165-12 Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H2SO4 at a Platinum Working Electrode
ASTM C1165-17 Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H2SO4 at a Platinum Working Electrode
ASTM G97-97(2007) Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
ASTM C1165-23 Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H2SO4 at a Platinum Working Electrode
ASTM F1318-90(2003) Standard Test Method for Determination of Productivity Using Electrostatic Copy Machines with Various Configurations
ASTM C536-83(2004)e1 Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing
ASTM C536-83(2014)e1 Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing
ASTM G180-13 Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries
ASTM F1318-90(1998) Standard Test Method for Determination of Productivity Using Electrostatic Copy Machines with Various Configurations
ASTM F1318-90(2009) Standard Test Method for Determination of Productivity Using Electrostatic Copy Machines with Various Configurations
ASTM D2413-99(2005) Standard Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric
ASTM D2413-99 Standard Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric
ASTM B812-96 Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
ASTM B812-96(2002)e1 Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
ASTM B812-96(2008) Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
ASTM B812-96(2013) Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications

Professional Standard - Machinery, Preparation method of three electrodes

JB/T 5232-1991 Method for preparing calibration solution for ion-selective electrode measurement
JB/T 8278-1999 Test solutions of electric conductivity analyzers.Preparation method of sodium chloride solutions

机械电子工业部, Preparation method of three electrodes

JB 5232-1991 Preparation method of calibration solution for ion selective electrode measurement

British Standards Institution (BSI), Preparation method of three electrodes

BS 6043-3.5.1:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method
PD IEC/TS 62607-4-5:2017 Nanomanufacturing. Key control characteristics. Cathode nanomaterials for nano-enabled electrical energy storage. Electrochemical characterization, 3-electrode cell method
BS EN 55015:2001 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
BS 6043-3.1.2:1999 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Sampling. Sampling of anodes
BS 6043-3.1.1:1999 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Sampling. Sampling of cathodes
BS EN 55015:1996 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
BS EN 55015+A2:2007 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
BS 6043-3.2:1997 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of density of cathode blocks and prebaked anodes
BS 6043-3.6:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of electrical resistivity of cathode blocks and prebaked anodes at ambient temperature
BS 6043-3.3:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method
BS 6043-2.1:1985 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Sampling
BS EN 55011:1998 Limits and methods of measurement of radio disturbance characteristics of industrial, scientific and medical (ISM) radio-frequency equipment
BS 6043-2-18:2001 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of total sulfur by the Eschka method
BS ISO 10770-2:2012 Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for three-port directional flow-control valves
BS 6043-1.9:1989 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulphur content (bomb method)
BS 6043-1.8:1986 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of ash
BS PD IEC TS 62607-8-2:2021 Nanomanufacturing. Key control characteristics. Nano-enabled metal-oxide interfacial devices. Test method for the polarization properties by thermally stimulated depolarization current
BS 7027:1990 Specification for limits and methods of measurement of the immunity of marine electrical and electronic equipment to conducted and radiated electromagnetic interference
BS 6043-1.13:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulfur content
BS 6043-2.9:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of particle size distribution
BS EN ISO 17059:2007 Oilseeds. Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method)
BS EN ISO 17059:2009 Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method)
BS 6043-3.8.1:2001 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Carboxy reactivity of prebaked anodes. Determination of the reactivity by a loss in mass method
BS 6043-1.2:1981 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of water content (Dean and Stark method)
BS IEC/IEEE 62582-1:2012 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. General
BS 6043-3.4:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes by a hydrostatic method
BS 6043-3.9.1:2002 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Chemical reactivity to air of prebaked anodes. Determination of the reactivity by a loss in mass method
BS 6043-2.11:1995 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of volatile matter content
BS 6043-1.1:2002 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Sampling. Section 1.1: Sampling
BS EN 62442-1:2011 Energy performance of lamp controlgear. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
BS EN 62442-1:2012 Energy performance of lamp controlgear. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
BS 6043-2.16:1998 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of water content of calcined coke
BS 6043-2.7:1986 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of the apparent oil content of calcined cokes (gravimetric method)
BS 6043-2.8:1987 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of oil content by solvent extraction of calcined coke
BS 6043-1.4:1981 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of content of toluene-insoluble material
BS 6043-1.5:1983 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of content of quinoline-insoluble material
BS 6043-2.4:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Analysis by X-ray fluorescence spectroscopy
BS 1597:1985 Specification for limits and methods of measurement of electromagnetic interference generated by marine equipment and installations
PD CISPR TR 16-4-5:2006+A2:2021 Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modelling. Conditions for the use of alternative test methods
BS EN ISO 8504-3:2001 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Hand- and power-tool cleaning
BS EN ISO 8504-3:1993 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Hand- and power-tool cleaning
BS IEC/IEEE 62582-4:2012 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. Oxidation induction techniques
BS 6043-2.6:1986 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of the density in xylene of calcined cokes
BS 6043-2.13:1996 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of tapped bulk density of green and calcined coke
BS 6043-1.6:1998 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of coking value. Section 1.6 Determination of coking value
BS IEC/IEEE 62582-1:2011 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. General
BS IEC/IEEE 62582-2:2012 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. Indenter modulus
BS PD CLC/TR 62271-208:2010 High-voltage switchgear and controlgear Part 208: Methods to quantify the steady state, power-frequency electromagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations
BS 7079-D3:1993 Preparation of steel substrates before application of paints and related products. Methods for surface preparation. Hand- and power-tool cleaning
BS EN 60835-2-11:1997 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on terrestrial radio-relay systems. Cross-polarization interference canceller
BS EN IEC 62442-1:2018 Tracked Changes. Energy performance of lamp controlgear. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
BS EN IEC 62442-1:2022 Tracked Changes. Energy performance of lamp controlgear. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
22/30443688 DC BS EN 63404. Switchgear and controlgear and their assemblies for low voltage. Integration method of radiocommunication device into switchgear and controlgear and their assemblies
BS 7821-6:2002 Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Requirements and tests concerning pressurized corrugated tanks
PD CLC/TR 62271-208:2010 High-voltage switchgear and controlgear. Methods to quantify the steady state, power-frequency electromagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations
BS ISO 21760-1:2019 Adhesives for organic electronic devices. Determination of water vapour transmission rate - Adhesive film preparation methods
BS EN 60510-2-5:1996 Methods of measurement for radio equipment used in satellite earth stations. Measurements for sub-systems. Frequency modulators
BS EN 60947-5-4:2003+A1:2019 Low-voltage switchgear and controlgear - Control circuit devices and switching elements. Method of assessing the performance of low-energy contacts. Special tests
BS 6043-1.10:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of volatile matter content. Section 1.10 Determination of volatile matter content
BS 6043-2.3:1997 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of trace elements in green and calcined coke by flame atomic absorption spectroscopy
20/30427819 DC BS EN IEC 62442-1. Energy performance of lamp controlgear. Part 1. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
17/30332825 DC BS EN 62442-1 AMD11. Energy performance of lamp controlgear. Part 1. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
BS IEC/IEEE 62582-3:2013 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. Elongation at break
BS 6043-2.15:1997 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of grain stability of calcined coke using a laboratory vibration mill
BS EN 60947-5-4:2003 Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements. Method of assessing the performance of low-energy contacts. Special tests

Professional Standard - Coal, Preparation method of three electrodes

MT 116.3-1986 Preparation method of coal rock analysis sample Part 3 Preparation method of coal rock thin section and light thin section

International Electrotechnical Commission (IEC), Preparation method of three electrodes

IEC TS 62607-4-5:2017 Nanomanufacturing - Key control characteristics - Part 4-5: Cathode nanomaterials for nano-enabled electrical energy storage - Electrochemical characterization, 3-electrode cell method
IEC TS 62607-4-1:2014 Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for lithium ion batteries - Electrochemical characterisation, 2-electrode cell method
IEC TS 62607-8-2:2021 Nanomanufacturing - Key control characteristics - Part 8-2: Nano-enabled metal-oxide interfacial devices - Test method for the polarization properties by thermally stimulated depolarization current
IEC 62442-1:2022 RLV Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
IEC 62442-1:2018 RLV Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
IEC 62442-1:2022 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
CISPR 15:2018 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
CISPR 15 AMD 1-2015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
CISPR 15 Edition 8.1-2015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
CISPR 15-2013 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
CISPR 15:2013 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
CISPR 15-2018 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
CISPR TR 18-2:2010 Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement and procedure for determining limits
CISPR TR 18-2-2017 RLV Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement and procedure for determining limits
CISPR TR 18-2:2017 RLV Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement and procedure for determining limits
CISPR TR 18-2-2010 Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement and procedure for determining limits
CISPR TR 18-2:2017 Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement and procedure for determining limits
IEC 62442-1:2011 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
IEC 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards
IEC/IEEE 62582-1-2011 Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 1: General
IEC 60947-5-4:2002+AMD1:2019 CSV Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests
IEC 62047-28:2017 Semiconductor devices - Micro-electromechanical devices - Part 28: Performance testing method of vibration-driven MEMS electret energy harvesting devices

Defense Logistics Agency, Preparation method of three electrodes

DLA SMD-5962-91726 REV A-2008 MICROCIRCUIT, DIGITAL, BIPOLAR CMOS, SCAN TEST DEVICE WITH OCTAL BUFFER, THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-91746 REV A-2008 MICROCIRCUIT, DIGITAL, BIPOLAR CMOS, SCAN TEST DEVICE WITH OCTAL BUFFER, INVERTING THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-94615 REV B-2013 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, SCAN TEST DEVICE WITH OCTAL REGISTERED BUS TRANSCEIVER, THREESTATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-94616 REV B-2013 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, SCAN TEST DEVICE WITH OCTAL BUS TRANSCEIVER AND REGISTER, THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON

RO-ASRO, Preparation method of three electrodes

STAS 12123/3-1983 Semiconductor devices VOLTAGE REFERENCE DIODES AND VOLTAGE REGULATOR DIODES Measuring methodes for electrical characteristics
STAS 12123/4-1984 Semiconductor devices VARIABLE-CAPACITANCE DIODES Measuring methodes for electrical characteristics
STAS 12123/2-1983 Semiconductor devices LOW POWER SIGNAL DIODES, INCLUDING SWITCHING DIODES Measuring methods for electrical characteristics
STAS 12124/1-1982 Semiconductor devices BIPOLAR TRANZISTORS Methods for measuring electrical static parameters
STAS 9057/3-1971 ELFXTROMKDICAL APPARATUS AND KQUIPMKNT Rules and niotho/Is for quality control
STAS 9057/3-1971-1 ELECTROMEDICAL APPARATUS AND EQUIPMENT Rules and methods for quality control
STAS SR EN 55015-1995 Limite and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
STAS SR CISPR 22-1996 Limits and methods of measurement of radio disturbance characteristics of information technology equipment
STAS SR CISPR 13+A1+A2 Limits 'and methods of measurement of radio interference characteristics of sound and television broadcast receivers and associated equipments
STAS 12619/140-1989 Fixed condensers for electronic equipments FIXED CONDENSERS FOR INTER- FERENCE ELIMINATIONS' Intermediary specification for technical- conditions and test methods
STAS 10226-1975 Radio interference DEVICES FOR RADIO INTERFERENCE SUPPRESSION General technical requirements for use and safety and methods of test

PL-PKN, Preparation method of three electrodes

PN T01504 ArkusZ26-1974 Transislors rbb' measuremen?s
PN T04801-1966 Low-power electronic tubes. Methods of measurement of mutual conductance of grid- control tubes
PN A75101-06-1990 Fruit and vegetable products Preparation of samples and testing methods Determination of pH by potentiometric method
PN A75101-19-1990 Fruit and vegetable products Preparation of samples and testing methods Determination of water absorption ability
PN A75101-18-1990 Fruit and vegetable products Preparation of samples and testing methods Determination of minera? impurities content
PN T04503-1991 limits and methods of measurement of immunity characteristics of sound and television broadcast receivers and associated equipment

CZ-CSN, Preparation method of three electrodes

CSN 35 8752-1976 Semiconductor devices. Transistors. Measuring methods for common base output capacitance.
CSN EN 55015-1994 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

Association Francaise de Normalisation, Preparation method of three electrodes

NF C91-015:1996 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment.
NF EN 60619:1993 Appareils électriques pour la préparation de la nourriture - Méthodes de mesure.
NF EN 60619/A1:1996 Appareils électriques pour la préparation de la nourriture - Méthodes de mesure.
NF C64-115:1990 A.C. High-Voltage Switchgear and Controlgear Three pole circuit-breakers Special additional requirements for current-breaking on no-load transformers
NF C91-015/A1:2007 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment.
NF E48-440-2*NF ISO 10770-2:2013 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 2 : test methods for three-port directional flow-control valves
NF C91-011*NF EN 55011:2016 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
NF C91-011:2010 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement.
NF EN IEC 62442-1:2022 Performance énergétique des appareillages de lampes - Partie 1 : appareillages des lampes à fluorescence - Méthode de mesurage pour la détermination de la puissance d'entrée totale des circuits d'appareillage et du rendement des appareillages
NF C91-015*NF EN 55015:2014 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
NF C91-022:2007 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement.
NF C91-022:2012 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement.
NF C93-736*NF EN 61189-6:2008 Test methods for electrical materials, interconnection structures and assemblies - Part 6 : test methods for materials used in manufacturing electronic assemblies
NF C93-735-503*NF EN 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503 : general test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards
NF C91-025:2003 Radio disturbance characteristics for the protection of receivers used on board vehicles, boats and on devices - Limits and methods of measurement.
NF C71-442-1:2013 Energy performance of lamp controlgear - Part 1: controlgear for fluorescent lamps - Method of measurement to dertermine the total input power of controlgear circuits and the efficiency of the controlgear
NF EN 303215:2015 Ingénierie de l'environnement (EE) - Méthodes de mesure et limites de consommation de courant dans les équipements de réseaux de télécommunication à large bande (V1.3.1)
NF T35-504-3:2001 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3 : hand- and power-tool cleaning.
NF EN IEC 62442-2:2022 Performance énergétique des appareillages de lampes - Partie 2 : appareillages des lampes à décharge (à l'exclusion des lampes à fluorescence à vapeur de mercure à basse pression) - Méthode de mesurage pour la détermination du rendement des ...
NF EN 60947-5-4/A1:2019 Appareillage à basse tension - Partie 5-4 : appareils et éléments de commutation pour circuits de commande - Méthode d'évaluation des performances des contacts à basse énergie - Essais spéciaux
NF EN 60947-5-4:2004 Appareillage à basse tension - Partie 5-4 : appareils et éléments de commutation pour circuits de commande - Méthode d'évaluation des performances des contacts à basse énergie - Essais spéciaux
NF C91-016-4-2:2005 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2 : uncertainties, statistics and limit modelling - Incertainty in EMC measurements.
NF C63-154*NF EN 60947-5-4:2004 Low-voltage switchgear and controlgear - Part 5-4 : control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests.

Korean Agency for Technology and Standards (KATS), Preparation method of three electrodes

KS R 9158-2002 Test methods control equipment of electric rolling stock
KS B ISO 10770-2:2002 Electrically modulated hydraulic control valves-Part 2:Test methods for three-way directional flow control valves
KS B ISO 10770-2:2013 Electrically modulated hydraulic control valves－Part 2：Test methods for three-way directional flow control valves
KS R 1169-2009(2019) Test method for automotive electric parking brake control equipments
KS C 9815-2019 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
KS C CISPR TR 18-2-2022 Radio interference characteristics of overhead power lines and high-voltage equipment —Part 2: Methods of measurement and procedure for determining limits
KS B ISO 9692-3:2004 Welding and allied processes-Recommendations for joint preparation-Part 3:Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
KS M ISO 8504-3:2021 Preparation of steel substrates before application of paints and related products — Surface preparation methods —Part 3: Hand- and power-tool cleaning
KS M ISO 8504-3:2002 Preparation of steel substrates before application of paints and related products－Surface preparation methods－Part 3：Hand- and power-tool cleaning
KS C IEC 62582-1-2017(2022) Nuclear power plants — Instrumentation and control important to safety — Electrical equipment condition monitoring methods — Part 1: General
KS C IEC 61377-2003(2013)

Professional Standard - Aviation, Preparation method of three electrodes

HB/Z 339.1-1999 Analytical method of chromic acid anodic oxidation solution of aluminum alloy Determination of free chromium trioxide and total chromium trioxide content by potentiometric titration

工业和信息化部, Preparation method of three electrodes

YS/T 1057.2-2020 Methods for chemical analysis of cobalt tetroxide Part 2: Determination of chloride ion content Ion selective electrode method

German Institute for Standardization, Preparation method of three electrodes

DIN IEC/TS 62607-4-1:2018-07*DIN SPEC 42607-4-1:2018-07 Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for nano-enabled electrical energy storage - Electrochemical characterisation, 2-electrode cell method (IEC/TS 62607-4-1:2015)
DIN EN 55015:2008 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (IEC/CISPR 15:2005 + A1:2006); German version EN 55015:2006 + A1:2007
DIN EN 61189-3:2008 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) (IEC 61189-3:2007); German version EN 61189-3:2008
DIN EN 55015:2007 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (IEC/ CISPR 15:2005); German version EN 55015:2006
DIN EN 50350:2004 Charging control systems for household electric room heating of the storage type - Methods for measuring performance; German version EN 50350:2004
DIN EN 55022:2008 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement (IEC/CISPR 22:2005, modified + A1:2005); German version EN 55022:2006 + A1:2007
DIN EN 61189-5-503:2018-01 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards (IEC 61189-5-503:2017)...
DIN VDE 0873 Bb.2:1990 Radio interference characteristics of overhead power lines and high-voltage equipment; part 2: methods of measurement and procedure for determining limits; identical with CISPR 18-2:1986
DIN EN 55015 Bb.2:2014 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment; Supplement 2: Test method on electromagnetic emissions - Part 2: Electronic control gear for discharge lamps excluding fluorescent lamps (
DIN EN ISO 17059:2009 Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method) (ISO 17059:2007); English version of DIN EN ISO 17059:2009-11
DIN EN 55015 Bb.1:2014 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment; Supplement 1: Test method on electromagnetic emissions - Part 1: Electronic control gear for single- and double-capped fluorescent lamps (

AENOR, Preparation method of three electrodes

UNE-EN 60619/A1:1997 ELECTRICALLY OPERATED FOOD PREPARATION APPLIANCES. METHODS FOR MEASURING THE PERFORMANCE.
UNE 20712-2-3:1993 METHODS OF MEASUREMENT FOR RADIO EQUIPMENT USED IN SATELITE EARTH STATIONS. PART 2: MEASUREMENTS FOR SUB-SYSTEMS. SECTION THREE: LOW-NOISE AMPLIFIER.
UNE 20711-3-3:1993 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN TERRESTRIAL RADIO-RELAY SYSTEMS. PART 3: SIMULATED SYSTEMS. SECTION THREE: MEASUREMENTS FOR MONOCHROME AND COLOUR TELEVISION TRANSMISSION.

European Committee for Standardization (CEN), Preparation method of three electrodes

prEN 55015-1992 Limits and methods of measurement of radio disturbance; characteristics of electrical lighting and similar equipment (CISPR 15:1992)
prEN 55013 prA11-1992 Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment
EN ISO 17059:2019 Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method) (ISO 17059:2019)
EN ISO 17059:2009 Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method) (ISO 17059:2007)
EN 55011:1991 Limits and methods of measurement of radio disturbance characteristics of industrial, scientific and medical (ISM) radio-frequency equipment (CISPR 11:1990, modified)

International Organization for Standardization (ISO), Preparation method of three electrodes

ISO 10770-2:1998 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 2: Test methods for three-way directional flow control valves
ISO 10770-2:2012 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 2: Test methods for three-port directional flow-control valves
ISO 17059:2007 Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method)

Professional Standard - Chemical Industry, Preparation method of three electrodes

HG/T 3175-2002 Fabrication and inspection method for High pressure urea equipment ultrasonic examination(UT) on the strip overlay welds of stainless steel

ZA-SANS, Preparation method of three electrodes

SANS 2200:2005 Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement
SANS 215:2009 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

ETSI - European Telecommunications Standards Institute, Preparation method of three electrodes

ETS 300 225-1998 Radio Equipment and Systems (RES); Technical Characteristics and Methods of Measurement for Survival Craft Portable VHF Radiotelephone Apparatus (Third Edition)

Standard Association of Australia （SAA）, Preparation method of three electrodes

AS 2300.2.3:1981 Methods of chemical and physical testing for the dairying industry - Liquid milks - Determination of the iodide content of milk - Selective ion electrode method
AS/NZS CISPR 16.4.5:2013
AS/NZS CISPR 15:2006 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
AS 60947.5.4:2004 Low-voltage switchgear and controlgear - Control circuit devices and switching elements - Methods of assessing the performance of low-energy contacts - Special tests
AS/NZS CISPR 15:2011
AS/NZS IEC 60947.5.4:2015

ES-UNE, Preparation method of three electrodes

UNE-EN IEC 62442-1:2019 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
UNE-EN IEC 62442-1:2022 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear (Endorsed by Asociación Española de Normalización...
UNE-EN IEC 62442-2:2019 Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear
UNE-EN IEC/IEEE 62582-6:2021 Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 6: Insulation resistance (Endorsed by Asociación Española de Normalización in September of 2021.)

American National Standards Institute （ANSI), Preparation method of three electrodes

ANSI/ASTM D2413:2000 Test Methods for Preparation and Electrical Testing of Insulating Paper and Board Impregnated with a Liquid Dielectric

SE-SIS, Preparation method of three electrodes

SIS SS 447 20 22-1988 Limits andmethods of measurement of radio interference characteristics of information technology equipment

European Committee for Electrotechnical Standardization（CENELEC）, Preparation method of three electrodes

EN 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards
CLC/TR 62271-208:2010 High-voltage switchgear and controlgear - Part 208: Methods to quantify the steady state, power-frequency electromagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations
CLC/TR 62271-208-2010 High-voltage switchgear and controlgear - Part 208: Methods to quantify the steady state, power-frequency electromagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations

Professional Standard - Electricity, Preparation method of three electrodes

DL/T 567.2-2018 Fuel Test Methods for Thermal Power Plants Part 2: Collection and Preparation of Fuel Pulverized Coal Samples

Danish Standards Foundation, Preparation method of three electrodes

DS/CLC/TR 62271-208:2010 High-voltage switchgear and controlgear - Part 208: Methods to quantify the steady state, power-frequency electromagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations
DS/IEC CISPR/TR 16-4-5:2009 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods

Japanese Industrial Standards Committee (JISC), Preparation method of three electrodes

JIS B 8659-2:2002 Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 2: Test methods for three-way directional flow control valves
JIS B 8659-2:2017 Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 2: Test methods for three-port directional flow-control valves
JIS C 62610-2:2021 Mechanical structures for electrical and electronic equipment -- Thermal management for cabinets -- Part 2: Method for the determination of forced air cooling
JIS R 1633:1998 Sample preparation method of fine ceramics and fine ceramic powders for scanning electron microscope observation

未注明发布机构, Preparation method of three electrodes

BS 6043-1.7:1988(2011) Methods of sampling and test for Carbonaceous materials used in aluminium manufacture — Part 1 : Electrode pitch — Section 1.7 Determination of apparent density (buoyancy method)
BS 6043-2.12:1994(2011) Methods of sampling and test for Carbonaceous materials used in aluminium manufacture — Part 2 : Electrode coke — Section 2.12 Determination of particle size distribution of fine coke

YU-JUS, Preparation method of three electrodes

JUS N.N6.185-1978 Radiocommunications. Wired distribution systems. Methods of measurements. Television RF signal to intermodulation ratio. Typical second and third order products.
JUS N.N6.175-1978 Radiocommunications. Wired distribution systems. Methods of measurements. Television signal to noise mtio.
JUS L.N4.207-1989 Indu&trlal - process measuremetit and ccmtrol. Electromagnetic compatibllity. Gonetal procedure for tbe ehoice oguipment and test metbod

Society of Automotive Engineers (SAE), Preparation method of three electrodes

SAE J551E-1977 LIMITS AND METHODS OF MEASUREMENT OF RADIO INTERFERENCE CHARACTERISTICS OF VEHICLES AND DEVICES (20–1000 MHz)
SAE J551F-1978 LIMITS AND METHODS OF MEASUREMENT OF RADIO INTERFERENCE CHARACTERISTICS OF VEHICLES AND DEVICES (20–1000 MHz)

Professional Standard - Agriculture, Preparation method of three electrodes

水产品质量安全检验手册 9.3.1.0-2005 Chapter IX Fishing Feed Inspection Section 3 Fishing Feed Routine Physical and Chemical Testing Methods 1. Determination of Fluorine in Fishing Feed--Ion Selective Electrode Method (GBT 13083-2002)
水产品质量安全检验手册 7.2.1.3-2005 Chapter 7 Inspection of additives in aquatic products Section 2 Determination of sweeteners in aquatic products 1. Determination of sodium saccharin (GBT 5009.28-2003) (3) Determination method of ion selective electrode

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Preparation method of three electrodes

ASHRAE NY-08-004-2008 Method for Optimizing Equipment Cooling Effectiveness and HVAC Cooling Costs in Telecom and Data Centers

TH-TISI, Preparation method of three electrodes

TIS 1503-1998 Radio interference characteristics of overhead power lines and hight-voltage equipment.part 2: methods of measurement and procedure for determining limits

KR-KS, Preparation method of three electrodes

KS M ISO 8504-3-2021 Preparation of steel substrates before application of paints and related products — Surface preparation methods —Part 3: Hand- and power-tool cleaning
KS C IEC 62582-1-2017 Nuclear power plants — Instrumentation and control important to safety — Electrical equipment condition monitoring methods — Part 1: General

GOSTR, Preparation method of three electrodes

GOST 12.4.172-2019 Occupational safety standards system. Personal protective means from power frequency electric fields. Personal screening suit. General technical requirements. Test methods
GOST 30804.6.3-2013 Electromagnetic compatibility of technical equipment. Electromagnetic disturbance from technical equipment intended for use in residential, commercial and light-industry environments. Limits and test methods

BE-NBN, Preparation method of three electrodes

Taiwan Provincial Standard of the People's Republic of China, Preparation method of three electrodes

CNS 14409-2000 Limits and methods of measurement of immunity characteristics of sound and television broadcast receivers and associated equipment

IX-CISPR, Preparation method of three electrodes

CISPR TR 16-4-5:2006/AMD1:2014/AMD2:2021 CSV Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods
CISPR TR 16-4-5:2006/AMD1:2014 CSV Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods

Lithuanian Standards Office , Preparation method of three electrodes

LST EN 55015-2013 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (CISPR 15:2013 + IS1:2013 + IS2:2013)

Institute of Electrical and Electronics Engineers (IEEE), Preparation method of three electrodes

IEEE Std 1007-1991 IEEE Standard Methods and Equipment for Measuring the Transmission Characteristics of Pulse-Code Modulation (PCM) Telecommunications Circuits and Systems
IEEE Std C63.022-1996 American National Standard for Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment Limites Et Methodes De Mesure Des Caracteristiques De Perturbations Radioelectriques Produites Par Les Appareils De
IEC/IEEE 62582-1:2011 Edition 1.0 2011-08 Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 1: General
IEEE 1007-1991 Methods and equipment for measuring the transmission characteristics of pulse-code modulation (PCM) telecommunications circuits and systems
ANSI C63.022-1996 American National Standard for Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Preparation method of three electrodes

ASHRAE NA-04-9-2A-2004 Heat Loss from Electrical and Control Equipment in Industrial Plants: Part 1 - Methods and Scope (RP-1104)

PT-IPQ, Preparation method of three electrodes

NP EN 60947-5-4-2000 Low-valtage switchgear and controlgear Part 5:Control circuit devices and switching elements Section 4:Methods of assessing the performance of low energe contacts-Special tests(IEC 60947-5-4:1996)

IEC - International Electrotechnical Commission, Preparation method of three electrodes

CISPR TR 16-4-5-2006 Specification for radio disturbance and immunity measuring apparatus and methods – Part 4-5: Uncertainties@ statistics and limit modelling – Conditions for the use of alternative test methods (Edition 1.0)

国家市场监督管理总局、中国国家标准化管理委员会, Preparation method of three electrodes

GB/T 40815.2-2021 Mechanical structures for electrical and electronic equipment—Thermal management for cabinets in accordance with inch and metric system—Part 2: Method for the determination of forced air cooling

IN-BIS, Preparation method of three electrodes

IS 10803-1984