ZH
RU
ES

Indoor temperature class

Indoor temperature class, Total:488 items.

In the international standard classification, Indoor temperature class involves: Air quality, Installations in buildings, Ventilators. Fans. Air-conditioners, Fasteners for aerospace construction, Farming and forestry, Thermodynamics and temperature measurements, Ceramics, Geology. Meteorology. Hydrology, Environmental protection, Vocabularies, Leisure. Tourism, Conducting materials, Materials for aerospace construction, Energy and heat transfer engineering in general, Physical planning. Town planning, Construction materials, Sterilization and disinfection, Services, Iron and steel products, Coatings and related processes used in aerospace industry, Paints and varnishes, Components and accessories for telecommunications equipment, Insulation, Products of the chemical industry, Audio, video and audiovisual engineering, Metrology and measurement in general, Company organization and management, Aerospace fluid systems and components, Construction industry, Fasteners, Non-ferrous metals, Clothes, Buildings, Domestic, commercial and industrial heating appliances, Products of non-ferrous metals, Equipment for the chemical industry, Acoustics and acoustic measurements, Heat pumps, Linear and angular measurements, Environmental testing, Gears, Testing of metals.

Group Standards of the People's Republic of China, Indoor temperature class

T/GIEHA 012-2019 Indoor environmental ecological negative (oxygen) ion concentration level
T/GIEHA 002-2017 Indoor environmental purification and treatment agency qualification level
T/JSIIEPPC 0002-2020 Standard for indoor environmental purification and treatment agency qualification level
T/XJX 001-2018 Indoor cleaning and management enterprise qualification rating criteria
T/ICPAB 001-2021 Specification for indoor environmental purification and treatment agency qualification level
T/GIEHA 036-2022 Hospital indoor environment cleaning and disinfection service agency capacity level
T/JXHB 001-2023 Criteria for Qualification Level Assessment of Indoor Environmental Protection Quality Service Organizations
T/CMSA 0023-2021 Facility Agriculture Wind Disaster Meteorological Grade Solar Greenhouse and Plastic Greenhouse
T/GZZH 001-2020 Indoor Environmental Pollution Prevention and Purification Enterprise Qualification Grade Evaluation Criteria
T/SEA 002-2019 Standards for Indoor Environmental Purification Treatment and Clean Enterprise Qualification Grade Assessment
T/HNSNWF 002-2022 Qualification classification and evaluation criteria for construction capacity of indoor environme

American Society for Testing and Materials (ASTM), Indoor temperature class

ASTM E1332-90(2003) Standard Classification for Determination of Outdoor-Indoor Transmission Class
ASTM E1332-10 Standard Classification for Determination of Outdoor-Indoor Transmission Class
ASTM E1332-22 Standard Classification for Rating Outdoor-Indoor Sound Attenuation
ASTM C1499-09 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1499-09(2013) Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1361-01(2007) Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
ASTM C1361-96 Standard Practice for Constant-Amplitude, Axial Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
ASTM C1361-01 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
ASTM C1361-96(2001) Standard Practice for Constant-Amplitude, Axial Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
ASTM C1499-03 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161-13 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1360-01 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM C1360-96 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM C1360-01(2007) Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM C1684-13 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperaturemdash;Cylindrical Rod Strength
ASTM C1684-13e1 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperaturemdash;Cylindrical Rod Strength
ASTM C1273-18 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
ASTM F2732-23 Standard Practice for Determining the Temperature Ratings for Cold Weather Protective Clothing
ASTM C1273-05 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
ASTM C1424-04 Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
ASTM C1273-05(2010) Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
ASTM C1161-02c(2008) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM D7643-16 Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders
ASTM C1499-05 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1499-04 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1424-15(2019) Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
ASTM D6327-10 Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
ASTM C1273-95a(2000) Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
ASTM C1424-99 Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperatures
ASTM C1469-00 Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
ASTM C1469-00(2005) Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
ASTM C1469-10 Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
ASTM C1499-01 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1862-17 Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures
ASTM C1499-15 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1468-06 Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
ASTM C1468-00 Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
ASTM C1468-13 Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
ASTM D6327-10(2016) Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
ASTM C1292-00(2005) Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM C1292-00 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures

Korean Agency for Technology and Standards (KATS), Indoor temperature class

KS B 6154-2006 Room thermostats
KS W 0929-1998 Aerospace - Nuts, anchor, self-locking, floating, two-lug with counterbore, with MJ threads, coated or uncoated classification 1100MPa/235 degrees C, 1100MPa/315 degrees C or 1100MPa/425 degrees CDimensions
KS W ISO 3191:2008 Aerospace－Nuts, anchor, self-locking, fixed, single lug,reduced series, with counterbore, with MJ threads, classifications：1 100 MPa(at ambient temperature)/235 ℃,1 100 MPa(at ambient temperature)/315 ℃ and 1 100 MPa(at ambient temperature)/425 ℃－Dimensio
KS M ISO 17499:2011 Carbonaceous materials used in the production of aluminium-Determination of baking level expressed by equivalent temperature
KS M ISO 17499:2016 Carbonaceous materials used in the production of aluminium－Determination of baking level expressed by equivalent temperature
KS L 1599-2001(2021) Fine ceramics(advanced ceramics, advanced technical ceramics)－Test methodfor tensile strength of monolithic ceramics at room and elevated temperature
KS L 1599-2001(2016) Fine ceramics(advanced ceramics, advanced technical ceramics)－Test methodfor tensile strength of monolithic ceramics at room and elevated temperature
KS W ISO 9199:2020 Aerospace — Nuts, bihexagonal, selflocking, MJ threads,classifications: 1 100 MPa (at ambient temperature)/425 °C, 1 100MPa (at ambient temperature)/650 °C, 1 210 MPa (at ambient temperature)/425 °C,
KS W 0935-2018 Aerospace — Nuts, hexagonal, slotted(castellated), normal height, normal across flats, with MJ threads, classifications: 600 MPa(at ambient temperature)/120 ℃, 600 MPa(at ambient temperature)/ 235 ℃,
KS L 1601-2006(2016) Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for compressive strength of monolithicceramics at room temperature
KS C 0299-1999 Classification of environmental conditionsPart 3：Classification of groups of environmental parameters and their severitiesSection 3：Stationary use at weatherprotected locations
KS W ISO 8940:2020 Aerospace — Nuts, anchor, self-locking, sealing, floating, two-lug,with counterbore, with MJ threads, classifications:900 MPa (at ambient temperature)/120 °C,900 MPa (at ambient temperature)/175 °C an
KS L 1601-2006(2021) Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for compressive strength of monolithicceramics at room temperature
KS W ISO 9618:2007 Aerospace－Nuts, hexagonal, slotted(castellated), reduced height,normal across flats, with MJ threads, classifications：450 MPa (at ambient temperature)/120 ℃,450 MPa (at ambient temperature)/235 ℃,600 MPa (at ambient temperature)/425 ℃,900 MPa (at ambient
KS W ISO 12272:2005 Aerospace-Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications:900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and 900 MPa(at ambient temperature)/425 ℃-Dimensions
KS W ISO 12273:2005 Aerospace-Nuts, anchor, self-locking, floating, self-aligning,two lug, with MJ threads, classifications: 900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and900 MPa(at ambient temperature)/425 ℃-Dimensions
KS W ISO 12272:2016 Aerospace－Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications：900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and 900 MPa(at ambient temperature)/425 ℃－Dimensions
KS W ISO 12273:2016 Aerospace－Nuts, anchor, self-locking, floating, self-aligning,two lug, with MJ threads, classifications: 900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and900 MPa(at ambient temperature)/425 ℃－Dimensions
KS L ISO 14705:2018 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature

Japanese Industrial Standards Committee (JISC), Indoor temperature class

JIS B 8481:1980 Room thermostats
JIS Q 14064-1:2010 Greenhouse gases -- Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals

German Institute for Standardization, Indoor temperature class

DIN EN 3303:1997 Aerospace series - Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 3303:1997
DIN EN 4069:1996 Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/650 °C; German version EN 4069:1996
DIN 48127:1962 Wall bushings for use in open air, indoor plants; insulation class 3 to 30
DIN EN 3818:2005 Aerospace series - Bolts, MJ threads, in titanium alloy TI-P64001 - Strength class: 1100 MPa (at ambient temperature) - Technical specification; German and English version EN 3818:2004
DIN EN 3377:1996 Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3377:1996
DIN 42539-1:1968-08 Transformers; Bushings for Indoor and Outdoor Types; Insulation Class 3 N for 250 A to 3150 A, Assembly
DIN EN 2653:1996 Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C; German version EN 2653:1996
DIN EN 2650:1996 Aerospace series - Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C ; German version EN 2650:1996
DIN EN 2654:1996 Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 °C; German version EN 2654:1996
DIN EN 2906:1994 Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2906:1994
DIN EN 2910:1994 Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2910:1994
DIN EN 3726:2005 Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 3726:2004
DIN EN 50441-3:2007 Cables for indoor residential telecommunication installations - Part 3: Screened cables - Grade 3; German version EN 50441-3:2006
DIN 42539-2:1968-08 Transformers; Bushings for Indoor and Outdoor Types; Insulation Class 3 N for 250 A to 3150 A, Single Parts
DIN EN 3760:1996 Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3760:1996
DIN EN 2937:1994 Aerospace series - Screws, hexagon-head, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2937:1994
DIN EN 2652:1997 Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2652:1997
DIN EN 3723:1996 Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3723:1996
DIN EN 2939:1994 Aerospace series - Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2939:1994
DIN EN 3196:1994 Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3196:1994
DIN EN 2911:1995 Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2911:1995
DIN EN 2931:1994 Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2931:1994
DIN EN 2908:1994 Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2908:1994
DIN EN 2925:1994 Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2925:1994
DIN V 44576:2008 Electric room heating - Floor heating - Characteristics of performance - Definitions, test procedures, ratings and symbols
DIN EN 3035:1996 Aerospace series - 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa(at ambient temperature)/235 °C; German version EN 3035:1996
DIN EN 3724:2005 Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2> coated - Strength class: 1100 MPa (at ambient temperature); German and English version EN 3724:2004
DIN EN 4421:2008 Aerospace series - Studs, in titanium alloy TI-P64001, MoS<(Index)2> coated, with serrated locking ring in corrosion resisting steel - Strength Class: 1100 MPa (at ambient temperature); German and English version EN 4421:2007
DIN EN 2909:1995 Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2909:1995
DIN EN 3007:1996 Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3007:1996
DIN EN 2874:1996 Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature)/315 °C; German version EN 2874:1996
DIN EN 3241:2009 Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA92HT (A286), silver coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 3241:2008
DIN EN 2932:1996 Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2932:1996
DIN EN 3305:1996 Aerospace series - Screws, 100° countersunk head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated; classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 3305:1996
DIN 48125:1966 Outdoor/indoor wall bushings; insulation class 45N and 45S to 150N and 150S; mounting dimensions
DIN 267-29:1993 Fasteners; product grades for parts for bolted connections for use at temperatures ranging from -200 °C to +700 °C
DIN EN 3536:2007 Aerospace series - Nuts, hexagon, self-locking, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 3536:2006
DIN EN 4130:2009 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 4130:2009
DIN EN 3012:1995 Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy); classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3012:1995
DIN EN 2933:1996 Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2933:1996
DIN EN 2926:1996 Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2926:1996
DIN EN 2907:1995 Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2907:1995
DIN EN 3381:1996 Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 338
DIN V 65900-15:1999 Aerospace series - Materials for self-locking nuts, threaded inserts and screw thread inserts of temperature classes 425 °C (AECMA Technical Report TR 3791:1999)
DIN EN 3626:2007 Aerospace series - Nuts, hexagon, self-locking in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 3626:2006
DIN EN 3019:2008 Aerospace series - Self-locking plate nuts, floating, two-lug, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 3019:2008
DIN EN 2651:1996 Aerospace series - Screws, pan head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 °C; German version EN 2651:1996
DIN EN 2870:1996 Aerospace series - Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2870:1996
DIN EN 2583:1997 Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy, NI-PH2601 (Inconel 718); classification: 1275 MPa (at ambient temperature)/650 °C; technical specification; German version EN 2583:1997
DIN EN 3759:1996 Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3759:1996
DIN EN 2938:1995 Aerospace series - Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2938:1995
DIN EN 4073:2010 Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 4073:2009
DIN EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three-points); German version EN 658-5:2002
DIN EN 2934:1996 Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2934:1996
DIN EN 4116:2006 Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature) / 425 °C; German and English version EN 4116:2004
DIN EN 3240:2008 Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), uncoated - Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 3240:2007
DIN EN 3230:2001 Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 3230:2001
DIN 51104:2010 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Determination of compressive strength
DIN EN 3818:2019-08 Aerospace series - Bolts, MJ threads, in titanium alloy TI-P64001 - Strength class: 1100 MPa (at ambient temperature) - Technical specification; German and English version EN 3818:2019

廊坊市市场监督管理局, Indoor temperature class

DB1310/T 289-2022 Early warning level of low temperature chilling damage to tomatoes in solar greenhouses

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Indoor temperature class

GB/T 5701-1985 Optimum temperature in air-conditioning room
GB/T 42667-2023 Test method for iso-biaxial bending strength of fine ceramics at room temperature Double ring method
GB/T 25915.1-2010 Cleanrooms and associated controlled environments.Part 1:Classification of air cleanliness

British Standards Institution (BSI), Indoor temperature class

BS ISO 8279:2008 Aerospace - Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient tempe
BS 5756:2007+A2:2017 Visual strength grading of temperate hardwood-Specification
BS A 333:1999 Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
BS EN 3724:2004 Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS2 coated - Strength class: 1100 MPa (at ambient temperature)
BS EN 3228:2010 Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
BS ISO 12277:2000 Aerospace - Gang channel, self-locking, floating, standard series, with counterbore, classifications - 1100 MPa (at ambient temperature)/120 °C, 1100 MPa (at ambient temperature)/235 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
BS EN 3818:2005 Aerospace series - Bolts, MJ threads, in titanium alloy TI-P64001 - Strength class: 1100 MPa (at ambient temperature) - Technical specification
BS ISO 3209:2016 Aerospace. Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 C, 1 100 MPa (at ambient temperature)/315 C and 1 100 MPa (at ambient temperature)/ 425 C.
BS EN 3377:1996 Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/425 °C
BS EN 50441-2:2006 Cables for indoor residential telecommunication installations - Screened cables - Grade 2
BS EN 50441-3:2006 Cables for indoor residential telecommunication installations - Screened cables - Grade 3
BS EN 50441-2:2012 Cables for indoor residential telecommunication installations. Screened cables. Grade 1
BS EN 50441-4:2012 Cables for indoor residential telecommunication installations. Cables up to 1200 MHz. Grade 3
BS ISO 17499:2006 Carbonaceous materials used in the production of aluminium - Determination of baking level expressed by equivalent temperature
BS EN 4069:1996 Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600MPa (at ambient temperature)/650 °C
BS EN 50441-1:2006 Cables for indoor residential telecommunication installations - Unscreened cables - Grade 1
BS EN 50441-1:2012 Cables for indoor residential telecommunication installations. Unscreened cables. Grade 1
BS EN 3196:1994 Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/425 °C
BS EN 2911:1995 Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A 286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C
BS EN 3229:2010 Aerospace series. Nuts, hexagonal, plain, reduced height normal across flats, in steel, cadmium plated, left hand thread. Classification: 900 MPa (at ambient temperature)/235°C
BS EN 2869:2010 Aerospace series. Nuts, hexagonal, slotted/castellated, normal height, normal accross flats, in heat resisting steel, passivated. Classification: 1100 MPa (at ambient temperature) / 650°C
BS EN 3229:2009 Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated, left hand thread - Classification: 900 MPa (at ambient temperature)/235 °C
BS EN 2869:2009 Aerospace series - Nuts, hexagonal, slotted/castellated, normal height, normal accross flats, in heat resisting steel, passivated - Classification: 1100 MPa (at ambient temperature) / 650 °C
BS EN 4073:2009 Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification 1100 MPa (at ambient temperature) / 235 °C
BS EN 4073:2010 Aerospace series. Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification 1100 MPa (at ambient temperature) / 235°C
BS EN 4311:2006 Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature) / 315 °C
BS EN 3227:2010 Aerospace series - Nuts, hexagonal, plain, normal height, normal across flats, in steel, cadmium plated, left hand thread - Classification: 1100 MPa (at ambient temperature)/235 °C
BS EN 2907:1996 Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa (at ambient temperature)/650 °C
BS EN 2649:1995 Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated - Classification - 900 MPa (at ambient temperature)/235 °C
BS EN 3230:2001 Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated - Classificaiton: 900 MPa (at ambient temperature)/235 °C
BS EN 3004:1997 Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C - Technical specification
BS EN 4312:2006 Aerospace series - Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature) / 315 °C
BS EN 2413:1995 Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C
BS EN 2932:1996 Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C
BS EN 3626:2006 Aerospace series - Nuts, hexagon, self-locking in steel, cadmium plated, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature) / 235 °C
BS EN 3006:1994 Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature)/650°C
BS EN 3722:1995 Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A 286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
BS EN 2651:1997 Screws, pan head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 °C
BS EN 2652:1997 Screws, 100 ° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
BS EN 2931:1994 Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature)/650°C
BS EN 2925:1994 Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A 286). Classification: 900 MPa (at ambient temperature)/650°C
BS ISO 14705:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for hardness of monolithic ceramics at room temperature
BS EN 2874:1996 Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature) /315 °C
BS EN 3112:1995 Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
BS EN 2889:2006 Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature) / 235 °C
BS EN 4130:2009 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature) / 425 °C
BS EN 4591:2005 Aerospace series - Nuts, barrel, self-locking, floating, self-aligning,in heat resisting nickel base alloy, MoS2 lubricated - Classification: 15 50 MPa (at ambient temperature) / 315 °C
BS EN 2810:2001 Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature)/650 °C
BS ISO/TR 14179-1:2001 Gears. Thermal capacity. Rating gear drives with thermal equilibrium at 95C sump temperature
BS EN 3720:1995 Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
BS EN 3723:1996 Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
BS EN 2583:1997 Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 °C - Technical specification
BS EN 2887:1995 Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C
BS EN 2909:1995 Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A 286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C
BS EN 2938:1996 Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A 286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C
BS EN 3014:2001 Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C
BS EN 3014:2015 Aerospace series. Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286). Classification: 1100 MPa (at ambient temperature) / 650 ℃
BS EN 3007:1996 Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C
BS EN 2926:1996 Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C
BS ISO 14610:2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of porous ceramics at room temperature
BS ISO 15490:2008 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for tensile strength of monolithic ceramics at room temperature
BS EN 2654:1997 Screws, 100 ° countersunk normal head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 °C
BS EN 3012:1996 Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C
BS EN 2885:1996 Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
BS EN 2897:1996 Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature) /235 °C
BS EN 3240:2008 Aerospace series. Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), uncoated. Classification: 1100 MPa (at ambient temperature)/425°C
BS EN 3240:2007 Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), uncoated - Classification: 1 100 MPa (at ambient temperature)/425 °C
BS EN 3726:2004 Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425℃
BS EN 2863:2010 Aerospace series - Nuts, anchor, self-locking, fixed, 90 ° corner, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature) / 315 °C
BS EN 3444:2006 Aerospace series - Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1250 MPa (at ambient temperature) / 650 °C
BS EN 3725:2005 Aerospace series - Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS2 coated - Strength class: 1100 MPa (at ambient temperature)
BS EN 3063:1994 Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient temperature)/730°C
BS A 345:1999 Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C, 1100 MPa (at ambient temperature)/425°C. Dimensions

American National Standards Institute （ANSI), Indoor temperature class

ANSI/AHRI 910-2011 Performance Rating of Indoor Pool Dehumidifiers

Professional Standard - Meteorology, Indoor temperature class

QX/T 91-2008 Observation methods of indoor microclimate.air temperature,relative humidity and indoor-outdoor-air temperature difference

Hebei Provincial Standard of the People's Republic of China, Indoor temperature class

DB13/T 5175-2020 Greenhouse Vegetable Planting Low Temperature and Little Sunshine Weather Grade and Forecast
DB13/T 1268-2010 Method for measuring indoor air temperature of residents in winter heating period

Heilongjiang Provincial Standard of the People's Republic of China, Indoor temperature class

DB23/T 2723-2020 Maize suitable sowing temperature grade

未注明发布机构, Indoor temperature class

VDI 2083 Blatt 1-2022 Cleanroom technology, particle cleanliness classes of the air, Cleanroom technology, Particulate air cleanliness classes
DIN EN 4847:2022 Aerospace – Flat head spiral drive screw, coarse shank tolerance, medium thread length, alloy steel, cadmium plated – Class: 1 100 MPa (at room temperature)/235°C
DIN EN ISO 3741 Berichtigung 1:2002 Acoustics – Determination of the sound power levels of noise sources through sound pressure measurements – Reverberation room method of accuracy class 1
DIN EN ISO 3741:2001 Acoustics Determination of the sound power levels of noise sources from sound pressure measurements using reverberation chamber methods of accuracy class 1
BS EN 16755:2017(2022) Durability of reaction to fire performance — Classes of fire - retardant treated wood products in interior and exterior end use applications
DIN EN 4845:2022 Aerospace – 100° countersunk screw with spiral drive, short thread, made of high temperature steel FE-PA2601 (A286), passivated – Class: 900 MPa (at room temperature)/650 °C

Shandong Provincial Standard of the People's Republic of China, Indoor temperature class

DB37/T 2399-2013 Indoor air temperature measurement method

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), Indoor temperature class

ARI 350-2000 Sound Rating of Non-Ducted Indoor Air-Conditioning Equipment
ARI 350-2008 Sound Performance Rating of Non-Ducted Indoor Air-Conditioning Equipment

International Organization for Standardization (ISO), Indoor temperature class

ISO 8279:2008 Aerospace - Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient tempe
ISO 9157:2002 Aerospace - Nuts, spline-drive, self-locking, with MJ threads, classifications: 1100 MPa (at ambient temperature)/425°C, 1100 MPa (at ambient temperature)/650°C, 1210 MPa (at ambient temperature)/425°C, 1210 MPa (at ambient temperature)/730°C, 1550 MPa (a
ISO 17499:2006 Carbonaceous materials used in the production of aluminium - Determination of baking level expressed by equivalent temperature
ISO 17499:2023 Carbonaceous materials used in the production of aluminium — Determination of baking level expressed by equivalent temperature
ISO 6771:1987 Aerospace; Fluid systems and components; Pressure and temperature classifications
ISO 20506:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the in-plane shear strength of continuous-fibre-reinforced composites at ambient temperature by the Iosipescu test
ISO 7995:1985 Aerospace — Fasteners — Nuts, hexagon, self-locking — Strength classification 1 100 MPa — Maximum operating temperature 235 degrees C
ISO 9199:1998 Aerospace - Nuts, bihexagonal, self-locking, MJ threads, classifications: 1100 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/425 °C, 1210 MPa (at ambient temperature)/730 °C, 1550 MPa (at
ISO 14705:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature
ISO 12277:2000 Aerospace - Gang channel, self-locking, floating, standard series, with counterbore, classifications: 1100 MPa (at ambient temperature)/120 °C, 1100 MPa (at ambient temperature)/235 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 12278:1999 Aerospace - Nuts, barrel, self-locking, floating, self-aligning, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/235 °C, 1250 MPa (at ambient temperature)/235 °C and 1550 MPa (at ambient tempera
ISO 13589:1998 Aerospace - Nuts, bihexagonal, self-locking, with counterbore and MJ threads, classifications: 1100 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/425 °C, 1210 MPa (at ambient temperature)/
ISO 9938:1994 Aerospace - Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 °C/28 000 kPa - Procurement specification
ISO 14704:2008 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature
ISO 14704:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature
ISO 3168:1998 Aerospace - Nuts, anchor, self-locking, fixed, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 12274:1997 Aerospace - Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads; classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C and 900 MPa (at ambient temperature)/425 °C - Dimensions
ISO 14610:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of porous ceramics at room temperature
ISO 10096:1997 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 °C, 600 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/315 °C, 600 MPa
ISO 3209:1998 Aerospace - Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 3223:1998 Aerospace - Nuts, anchor, self-locking, fixed, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 3224:1998 Aerospace - Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 3209:2016 Aerospace - Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425

Tianjin Provincial Standard of the People's Republic of China, Indoor temperature class

DB12/T 443-2011 Indoor Temperature Measurement Method in Heating Period

HU-MSZT, Indoor temperature class

European Committee for Standardization (CEN), Indoor temperature class

EN 4073:2016 Aerospace series - Screws@ pan head@ hexalobular recess@ coarse tolerance shank@ medium length thread@ in alloy steel@ cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 ��
EN 3227:2010 Aerospace series - Nuts@ hexagonal@ plain@ normal height@ normal across flats@ in steel@ cadmium plated@ left hand thread - Classification: 1 100 MPa (at ambient temperature) / 235 ��
EN 4311:2006 Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C
EN 2910:1994 Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C
prEN ISO 14705 rev Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature
EN 4312:2006 Aerospace series - Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315 °C
EN 2925:1994 Bolts, Double Hexagon Head, Relieved Shank, Long Thread, in Heat Resisting Steel FE-PA92HT (A286) Classification : 900MPa (at Ambient Temperature) /650 Degrees C
EN 2906:1994 Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C
EN 4069:1996 Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/650 °C
EN 3377:1996 Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/425 °C
EN 2930:1996 Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 °C
EN 2907:1995 Aerospace series - Nuts, bihexagonal, self-locking, in heat-resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C
EN 3723:1996 Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
EN 3724:2004 Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS2 coated - Strength class: 1100 MPa (at ambient temperature)
EN 3724:2003 Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS2 coated - Classification: 1 100 MPa (at ambient temperature)
EN 3014:2015 Aerospace series - Shank nuts@ self-locking@ serrated@ in heat resisting steel FE-PA2601 (A286) - Classification: 1 100 MPa (at ambient temperature) / 650 ��
EN 2911:1995 Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C
EN 3196:1994 Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/425 °C
EN 3006:1994 Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C
EN 2908:1994 Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C
EN 3721:1995 Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
EN 3722:1995 Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C

Guizhou Provincial Standard of the People's Republic of China, Indoor temperature class

DB52/T 1662-2022 Classification and assessment of hot spring resorts

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Indoor temperature class

ASHRAE 3867-1995 Equivalent Outdoor Temperature for District Heating Systems
ASHRAE DA-00-3-5-2000 Impact of Heating Systems and Wall Surface Temperatures on Room Operative Temperature Fields
ASHRAE 3633-1993 New Similitude Modeling Technique for Studies of Nonisothermal Room Ventilation Flows
ASHRAE 4530-2002 Measurement of the Indoor Thermal Environment Using a Radiant Temperature Sensor
ASHRAE MN-00-4-1-2000 Outdoor Temperature and Indoor Thermal Comfort: Raising the Precision of the Relationship for the 1998 ASHRAE Database of Field Studies
ASHRAE 3648-1993 Two-Dimensional Natural Convection over the Isothermal Indoor Fenestration Surface - Finite Element Numerical Solution
ASHRAE DA-07-046-2007 Monitored Indoor Moisture and Temperature Conditions in Humid-Climate US Residences
ASHRAE KC-03-12-2-2003 A Comparison of Calculated and Measured Indoor-Side Window Temperature Profiles
ASHRAE SF-98-20-4-1998 Impact of Velocity and Temperature Fluctuations on the Accuracy of Low-Velocity Measurements Indoors by Thermal Anemometers
ASHRAE CH-03-10-1-2003 THERM Simulations of Window Indoor Surface Temperatures for Predicting Condensation
ASHRAE TO-98-12-5-1998 The Effects of Varying Indoor Air Temperature and Heat Gain on the Measurement of Retrofit Savings

Liaoning Provincial Standard of the People's Republic of China, Indoor temperature class

DB21/T 2475-2015 Facility Agriculture (Greenhouse) Wind and Snow Meteorological Disaster Warning Level

Gansu Provincial Standard of the People's Republic of China, Indoor temperature class

DB62/T 4110-2020 Main Meteorological Disaster Levels of Solar Greenhouses in Hexi Region

Inner Mongolia Provincial Standard of the People's Republic of China, Indoor temperature class

DB1503/T 0005-2021 Indoor heating temperature monitoring service specification
DB15/T 501-2011 Method for measuring air temperature in residential heating room
DB15/T 510-2012 Inner Mongolia farmland, grassland soil relative humidity grade index

European Association of Aerospace Industries, Indoor temperature class

AECMA PREN 2654-1991 Aerospace Series Bolts, 100 Degrees Countersunk Normal Head, Slotted Threaded to Head, in Brass, Tin Plated Classification: 380 MPa (at Ambient Temperature)/80 Degrees C Issue P 1
AECMA PREN 2264-1995 Aerospace Series Nuts, Anchor, Self-Locking, Floating, Two Lug, Incremental Counterbore, in Alloy Steel, Cadmium Plated, MoS2 Lubricated Classification: 900 MPa (at Ambient Temperature)/235 Degrees Celsius Edition 2
AECMA PREN 2652-1987 Aerospace Series Screws, 100 Degrees Countersunk Head, Slotted, Fully Threaded, in Steel Cadmium Plated Classification : 900 MPa/235 Degrees Celsius Issue P 1
AECMA PREN 3672-1994 Aerospace Series Shank Nuts, Self-Locking, in Heat Resisting Nickel Base Alloy NI-P101HT (Waspaloy), Silver Plated, for 30 Degree Swage Classification: 1 210 MPa (at Ambient Temperature)/730 Degrees C Edition P 1; Corrigendum
AECMA PREN 4139-1994 Aerospace Series Screws, Pan Head, Offset Cruciform Recess, Threaded to Head, in Alloy Steel, Cadmium Plated Classification: 1 100 MPa (at Ambient Temperature)/235 Degrees C Edition P1
AECMA PREN 4139-1993 Aerospace Series Screws, Pan Head, Offset Cruciform Recess, Threaded to Head, in Alloy Steel, Cadmium Plated Classification: 1 100 MPa (at Ambient Temperature)/ 235 Degrees Celsius Edition 1
AECMA PREN 2653-1989 Bolts, 100 Degrees Countersunk Normal Head, Slotted, Threaded to Head, in Corrosion Resisting Steel, Passivated Classification: 600 MPa/425 Degrees Celsius
AECMA PREN 2895-1993 Aerospace Series Nuts, Hexagonal, Plain, Normal Height, Normal Across Flats, in Corrosion Resisting Steel, Passivated Classification : 900 MPa (at Ambient Temperature) / 425 Degrees C Edition P 1
AECMA PREN 4297-1995 Aerospace Series Nuts, Hexagon, Self-Locking by Plastic Ring, Normal Height, Normal Across Flats, in Corrosion Resisting Steel, Passivated Classification : 900 MPa (at Ambient Temperature)/120 Degrees C Edition P 1
AECMA PREN 4297-1996 Aerospace Series Nuts, Hexagon, Self-Locking by Plastic Ring, Normal Height, Normal Across Flats, in Corrosion Resisting Steel, Passivated Classification: 900 MPa (at Ambient Temperature) /120 Degrees C Edition P 1
AECMA PREN 2653-1991 Aerospace Series Bolts, 100 Degrees Countersunk Head, Slotted, Threaded to Head, in Corrosion Resisting Steel, Passivated Classification: 600 MPa (at Ambient Temperature) /425 Degrees C Issue P 1
AECMA PREN 2654-1989 Bolts, 100 Degrees Countersunk Normal Head, Slotted, Threaded to Head, in Brass, Tin Plated Classification: 280 MPa/80 Degrees Celsius
AECMA PREN 3228-1992 Aerospace Series Nuts, Hexagon, Plain, Reduced Height, Normal Across Flats, in Steel, Cadmium Plated Classification: 900 MPa (at Ambient Temperature) / 235 Degrees Celsius Edition P 1
AECMA PREN 3229-1992 Aerospace Series Nuts, Hexagon, Plain, Reduced Height, Normal Across Flats, in Steel, Cadmium Plated, Left Hand Thread Classification: 900 MPa (at Ambient Temperature) / 235 Degrees Celsius Edition P 1
AECMA PREN 3230-1989 Aerospace Series Nuts, Hexagon, Slotted/ Castellated, Thin Normal Across Flats, in Steel, Cadmium Plated Classification : 900 MPa/235 Degrees C Issue P 1
AECMA PREN 3230-2001 Aerospace Series Nuts, Hexagon, Slotted / Castellated, Reduced Height, Normal Across Flats, in Steel, Cadmium Plated Classification : 900 MPa (at Ambient Temperature) / 235 Degrees Celsius Edition P 3; Supersedes Edition P 2: February 1996; Replaced by E
AECMA PREN 2862-1993 Aerospace Series Nuts, Anchor, Self-Locking, Fixed, 90 Degree Corner, with Counterbore, in Alloy Steel, Cadmium Plated, MoS2 Lubricated Classification : 1 100 MPa (at Ambient Temperature)/235 Degrees C Edition P 1; Corrigendum 05/10/1993
AECMA PREN 2876-1995 Aerospace Series Nuts, Hexagon, Plain, Reduced Height, Normal Across Flats, in Aluminium Alloy, Anodized Classification : 450 MPa (at Ambient Temperature)/ 120 Degrees C
AECMA PREN 3907-1994 Aerospace Series Bolts, Double Hexagon Head, Normal Shank, Long Thread, in Titanium Alloy TI-P63, MoS2 Coated Classification: 1 100 MPa (at Ambient Temperature)/350 Degrees C Edition P 1
AECMA PREN 4251-1997 Aerospace Series Nuts, Anchor, Self-Locking, Fixed, 90 Degree Corner, with Counterbore, in Heat Resisting Steel, Silver Plated Classification : 1 100 MPa (at Ambient Temperature) / 425 Degrees C Edition P 1
AECMA PREN 4252-1997 Aerospace Series Nuts, Anchor, Self-Locking, Fixed, 90 Degree Corner, Reduced Series with Counterbore, in Heat Resisting Steel, Silver Plated Classification : 1 100 MPa (at Ambient Temperature) /425 Degree C Edition P 1
AECMA PREN 4253-1997 Aerospace Series Nuts, Anchor, Self-Locking, Fixed, Closed Corner, Reduced Series with Counterbore, in Heat Resisting Steel, Silver Plated Classification : 1 100 MPa (at Ambient Temperature) / 425 Degrees C Edition P 1
AECMA PREN 4254-1996 Aerospace Series Nuts, Anchor, Self-Locking, Fixed, 60 Degree Corner, with Counterbore, in Heat Resisting Steel, Silver Plated Classification : 1 100 MPa (at Ambient Temperature) / 425 Degrees Celsius Edition P1; Superseding C3 No 2515
AECMA PREN 4254-1997 Aerospace Series Nuts, Anchor, Self-Locking, Fixed, 60 Degree Corner, with Counterbore, in Heat Resisting Steel, Silver Plated Classification : 1 100 MPa (at Ambient Temperature) / 425 Degrees C Edition P 1
AECMA PREN 4126-1994 Aerospace Series Nuts, Anchor, Self-Locking, Floating, Two Lug, Reduced Series, with Incremental Counterbore, in Heat Resisting Steel, MoS2 Lubricated Classification: 900 MPa (at Ambient Temperature) /315 Degrees C Edition P1
AECMA PREN 4323-1998 Aerospace Series Screws, 100 Degree Countersunk Head, Six Lobe Recess, Threaded to Head, in Titanium Alloy TI-P63, Anodized, MoS2 Coated Classification: 900 MPa (at Ambient Temperature)/ 350 Degrees C Edition P1
AECMA PREN 4173-1993 Aerospace Series Lockbolts, 100 Degree Countersunk Normal Head, Sheartype, Close Tolerance, in Titanium Alloy 6AL4V, Anodized, or Aluminium Coated, Metric Series Classification : 1 100 MPa (at Ambient Temperature)/ 315 Degrees Celsius Edition P1
AECMA PREN 2649-1987 Screws, Pan Head Slotted, Fully Threaded, in Steel, Cadmium Plated Classification 900 MPa/235 Degrees Celsius
AECMA PREN 3226-1992 Aerospace Series Nuts, Hexagon, Plain, Normal Height, Normal Across Flats, in Steel, Cadmium Plated Classification: 1 100 MPa (at Ambient Temperature) / 235 Degrees Celsius Edition P 1
AECMA PREN 3227-1992 Aerospace Series Nuts, Hexagon, Plain, Normal Height, Normal Across Flats, in Steel, Cadmium Plated, Left Hand Thread Classification: 1 100 MPa (at Ambient Temperature) / 235 Degrees Celsius Edition P 1
AECMA PREN 2649-1994 Aerospace Series Screws, Pan Head, Slotted, Threaded to Head, in Alloy Steel, Cadmium Plated Classification : 900 MPa (at Ambient Temperature) / 235 Degrees C Edition P 2
AECMA PREN 3771-1993 Aerospace Series Nuts, Bi-Hexagonal, Plain, in Heat Resisting Steel, MoS2 Lubricated Classification : 1 100 MPa (at Ambient Temperature) / 315 Degrees C Edition P 1
AECMA PREN 3771-1999 Aerospace Series Nuts, Bi-Hexagonal, Plain, in Heat Resisting Steel, MoS2 Lubricated Classification : 1 100 MPa (at Ambient Temperature) / 315 Degrees C Edition P 2
AECMA PREN 4164-1993 Aerospace Series Screws, 100 Degrees Countersunk Normal Head, Offset Cruciform Recess, Threaded to Head, in Alloy Steel, Cadmium Plated Classification : 1 100 MPa (at Ambient Temperature) / 235 Degrees Celsius Edition P1; Supersedes C3 N
AECMA PREN 4164-1994 Aerospace Series Screws, 100 Degrees Countersunk Normal Head, Offset Cruciform Recess, Threaded to Head, in Alloy Steel, Cadmium Plated Classification : 1 100 MPa (at Ambient Temperature)/235 Degrees C Edition P1
AECMA PREN 4129-1994 Aerospace Series Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Medium Length Thread, in Alloy Steel, Cadmium Plated Classification: 1 100 MPa (at Ambient Temperature)/235 Degrees C Edition P1
AECMA PREN 4129-1993 Aerospace Series Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Medium Length Thread, in Alloy Steel, Cadmium Plated Classification : 1 100 MPa (at Ambient Temperature)/235 Degrees C Edition P1
AECMA PREN 4130-1994 Aerospace Series Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Medium Length Thread, in Titanium Alloy, Aluminium IVD Coated Classification : 1 100 MPa (at Ambient Temperature) / 425 Degrees C Edition P1
AECMA PREN 4130-1993 Aerospace Series Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Medium Length Thread, in Titanium Alloy, Aluminium IVD Coated Classification : 1 100 MPa (at Ambient Temperature)/450 Degrees C Edition P1
AECMA PREN 4131-1994 Aerospace Series Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Medium Length Thread, in Heat Resisting Nickel Base Alloy, Aluminium IVD Coated Classification : 1 250 MPa (at Ambient (Temperature) / 425 Degrees C Edition P1
AECMA PREN 4131-1993 Aerospace Series Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Medium Length Thread, in Heat Resisting Nickel Base Alloy, Aluminium IVD Coated Classification : 1 250 MPa (at Ambient (Temperature) / 450 Degrees C Edition P1
AECMA PREN 4509-1999 Aerospace Series, Screws, 100 Degree Countersunk Normal Head, Offset Cruciform Recess, Threaded to Head, in Titanium Alloy, Anodized, with Aluminium Pigmented Coating Classification: 1 100 MPa (at Ambient Temperature)/ 315 Degrees Edition P 1
AECMA PREN 4173-1999 Aerospace Series Lockbolts, 100 Degree Countersunk Normal Head, Sheartype, Close Tolerance, in Titanium Alloy TI-P64001, Anodized, Metric Series Classification: 1 100 MPa (at Ambient Temperature)/ 315 Degrees Celsius Edition P 1
AECMA PREN 4125-1994 Aerospace Series Nuts, Anchor, Self-Locking, Fixed, Two Lug, Reduced Series, with Incremental Counterbore, in Heat Resisting Steel, MoS2 Lubricated Classification: 900 MPa (at Ambient Temperature) /315 Degrees C Edition P1
AECMA PREN 4126-1993 Aerospace Series Nuts, Anchor, Self-Locking, Floating, Two Lug, Reduced Series, with Incremental Counterbore, in Heat Resisting Steel, MoS2 Lubricated Classification: 900 MPa (at Ambient Temperature) / 315 Degrees Celsius Edition P1
AECMA PREN 4178-1994 Aerospace Series Screws, Pan Head, Six Lobe Recess, Coarse Tolerance Normal Shank, Medium Length Thread, in Titanium Alloy, Anodized, MoS2 Lubricated Classification : 1 100 MPa (at Ambient Temperature) / 315 Degrees C Edition P1
AECMA PREN 4178-1993 Aerospace Series Screws, Pan Head, Six Lobe Recess, Coarse Tolerance Normal Shank, Medium Length Thread, in Titanium Alloy, Anodized, MoS2 Lubricated Classification : 1 100 MPa (at Ambient Temperature) / 315 Degrees Celsius Edition P1
AECMA PREN 2650-1989 Bolts, Pan Head, Slotted, Threaded to Head, in Corrosion Resisting Steel Passivated Classification: 600 MPa/425 Degrees Celsius
AECMA PREN 2650-1990 Aerospace Series Bolts, Pan Head, Slotted, Threaded to Head, in Corrosion Resisting Steel, Passivated Classification: 600 MPa (at Ambient Temperature) /425 Degrees Celsius Issue P 1
AECMA PREN 4218-1999 Aerospace Series Inserts, Thin Wall, Locked and Self-Locking, MJ Threads, in Heat Resisting Steel, Passivated and MoS2-Lubricated Classification: 1100 MPa (at Ambient Temperature) / 315 Degrees Celsius Technical Specification Edition P1
AECMA PREN 4219-1996 Aerospace Series Nuts, Hexagon, Self-Locking by Domed Plastic Cap, Normal Height, Normal Across Flats, in Corrosion Resisting Steel, Passivated Classification : 900 MPa (at Ambient Temperature) / 120 Degrees Celsius Edition P 1
AECMA PREN 4219-1995 Aerospace Series Nuts, Hexagon, Self-Locking by Domed Plastic Cap, Normal Height, Normal Across Flats, in Corrosion Resisting Steel, Passivated Classification : 900 MPa (at Ambient Temperature) / 120 Degrees Celsius Edition P1; Superseding C 3/ WG 5 N 23
AECMA PREN 4421-2000 Aerospace Series Studs, in Titanium Alloy TI-P64001, MoS2 Coated, with Serrated Locking Ring in Corrosion Resisting Steel Strength Class: 1 100 MPa (at Ambient Temperature) Edition P 1
AECMA PREN 4172-1993 Aerospace Series Lockbolts, Protruding Head, Sheartype, Close Tolerance, in Titanium Alloy 6AL4V, Anodized or Aluminium Coated, Metric Series Classification : 1 100 MPa (at Ambient Temperature)/ 315 Degrees Clesius Edition P1
AECMA PREN 4135-1994 Aerospace Series Bolts, Normal Bi-Hexagonal Head, Coarse Tolerance Normal Shank, Medium Length Thread, in Titanium Alloy, Anodized, MoS2 Lubricated Classification: 1 100 MPa (at Ambient Temperature)/315 Degrees C Edition P1
AECMA PREN 4135-1993 Aerospace Series Bolts, Normal Bi-Hexagonal Head, Coarse Tolerance Normal Shank, Medium Length Thread, in Titanium Alloy, Anodized, MoS2 Lubricated Classification: 1 100 MPa (at Ambient Temperature) / 315 Degrees Celsius Edition P1
AECMA PREN 4138-1993 Aerospace Series Screws, Pan Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, in Alloy Steel, Cadmium Plated Classification: 1 100 MPa (at Ambient Temperature) / 235 Degrees Celsius Edition 1
AECMA PREN 4138-1994 Aerospace Series Screws, Pan Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, in Alloy Steel, Cadmium Plated Classification: 1 100 MPa (at Ambient Temperature)/235 Degrees C Edition P1
AECMA PREN 3818-1993 Aerospace Series Bolts with MJ Threads, in Titanium Alloy TI-P63 Classification: 1 100 MPa (at Ambient Temperature) Technical Specification Edition P 1
AECMA PREN 4117-1993 Aerospace Series Nuts, Bihexagonal, Self- Locking, in Heat Resisting Nickel Base Alloy NI-P100HT (Inconel 718), Silver Plated on Thread Classification : 1 500 MPa (at Ambient Temperature) / 600 Degrees C Edition P1
AECMA PREN 4047-1998 Aerospace Series Nuts, Self-Locking, MJ Threads, in Heat Resisting Nickel Base Alloy NI-PH2601 (Inconel 718), Silver Plated Classification: 1 550 MPa (at Ambient Temperature) / 600 Degrees C Technical Specification Edition P1
AECMA PREN 4132-1993 Aerospace Series Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Long Thread, in Alloy Steel, Cadmium Plated Classification : 1 100 MPa (at Ambient Temperature)/235 Degrees C Edition P1
AECMA PREN 4132-1994 Aerospace Series Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Long Thread, in Alloy Steel, Cadmium Plated Classification: 1 100 MPa (at Ambient Temperature)/235 Degrees C Edition P1
AECMA PREN 4136-1993 Aerospace Series Bolts, Normal Bi-Hexagonal Head, Coarse Tolerance Normal Shank, Long Thread, in Alloy Steel, Cadmium Plated Classification : 1 100 MPa (at Ambient Temperature)/235 Degrees C Edition P1
AECMA PREN 4136-1994 Aerospace Series Bolts, Normal Bi-Hexagonal Head, Coarse Tolerance Normal Shank, Long Thread, in Alloy Steel, Cadmium Plated Classification: 1 100 MPa (at Ambient Temperature)/235 Degrees C Edition P1
AECMA PREN 4137-1994 Aerospace Series Bolts, Normal Bi-Hexagonal Head, Stepped Shank, Long Thread, in Titanium Alloy, Anodized, MoS2 Lubricated Classification: 1 100 MPa (at Ambient Temperature)/315 Degrees C Edition P1
AECMA PREN 4124-1994 Aerospace Series Shank Nuts, Self-Locking, in Heat Resisting Nickel Base Alloy NI-P101HT (Waspaloy), Silver Plated on Thread, for 60 Degree Swage Classification: 1 210 MPa (at Ambient Temperature)/730 Degrees C Edition P1

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), Indoor temperature class

AHRI 350-2008 Sound Performance Rating of Non-Ducted Indoor Air-Conditioning Equipment

SE-SIS, Indoor temperature class

SIS SMS 1235-1970 Fittings oj copper alloys for piping. Pressure and temperature ratings
SIS SMS 1233-1970 Fittings of stainless steel for piping. Pressure and temperature ratings

Canadian General Standards Board （CGSB), Indoor temperature class

CGSB 3.23-2012-CAN/CGSB AMD 1-2013 Carbur閍cteur d抋viation (grades JET A et JET A-1)

机械工业部, Indoor temperature class

JB/T 5978-1992 Malleable cast iron pipe flange pressure--temperature grade

Association Francaise de Normalisation, Indoor temperature class

NF L24-508*NF EN 4069:1996 Aerospace series. Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated. Classification : 600 MPa (at ambient temperature) / 650 degrees celsius.
NF L22-519:1969 12 POINT SELF-LOCKING FLANGE NUTS. TEMPERATURE CLASS : 260 DEGREES C.
NF A32-055-2:1996 Technical delivery conditions for steel castings for pressure purposes. Part 2 : steel grades for use at room temperature and elevated temperatures.
NF T30-603:1978 Paints. Fillers for interior use. Differential thermal analysis.
NF EN 3818:2019 Série aérospatiale - Vis à filetage MJ, en alliage de titane TI-P64001 - Classe de résistance : 1 100 MPa (à température ambiante) - Spécification technique
NF L22-588:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L24-031:2005 Aerospace series Bolts with MJ Threads, in titanium alloy TI-P64001 - Strength Class : 1 100 MPa ( at ambient temperature) - Technical specification.
NF L22-541:2001 Aircraft bolts and nuts - Hexagonal nuts, self-locking, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) / 235 oC or in heat resisting steel, silver plated - Classification : 1 100 MP
NF L24-221*NF EN 2927:1996 Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718). Classification : 1 275 MPa (at ambient temperature) / 650 degrees celsius.
NF B35-505:1983 Laboratory glassware. Short enclosed-scale thermometers for precision use.
NF B35-507:1983 Laboratory glassware. Enclosed-scale general purpose thermometers.
NF B35-509:1983 Laboratory glassware. Enclosed-scale calorimeter thermometers.
NF B35-504:1983 Laboratory glassware. Long enclosed-scale thermometers for precision use.
NF L24-509*NF EN 3377:1996 Aerospace series. Nuts, hexagonal, self-locking, in heat resisting steel fe-PA92HT (A286). Classification: 1100 MPa (at ambient temperature) / 425 degrees celsius.
NF L24-174*NF EN 4073:2016 Aerospace series - Screws, pan head, hexalobular recess, coarse tolerance shank, medium length thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 oC
NF C93-543-2:2006 Cables for indoor residential telecommunication installations - Part 2 : screened cables - Grade 2.
NF C93-543-3*NF EN 50441-3:2006 Cables for indoor residential telecommunication installations - Part 3 : screened cables - Grade 3
NF C93-543-2*NF EN 50441-2:2017 Cables for indoor residential telecommunication installations - Part 2 : screened cables - Grade 1
NF L24-230*NF EN 3724:2005 Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS2 coated - Strenght class : 1 100 MPa (at ambient temperature).
NF L24-222*NF EN 2928:1996 Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718), silver plated. Classification : 1 275 MPa (at ambient temperature) / 650 degrees celsius.
NF C93-543-1:2006 Cables for indoor residential telecommunication installations - Part 1 : un-screened cables - Grade 1.
NF L24-139*NF EN 3760:1997 Aerospace series. Screws, 100 degrees countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated. Classification : 1100 MPa (at ambient temperature) / 425 degrees celsius.
NF L24-513*NF EN 3230:2001 Aerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in steel, cadmium plated - Classification : 900 MPa (at ambient temperature) / 235o C
NF L24-130*NF EN 2652:1997 Aerospace series. Screws, 100 degrees countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated. Classification : 900 MPa (at ambient temperature) / 235 degrees Celsius.
NF EN 4421:2007 Série aérospatiale - Goujons, en alliage de titane TI-P64001, revêtus MoS2, avec bague de verrouillage dentelée, en acier résistant à la corrosion - Classe de résistance : 1 100 MPa (à température ambiante)
NF L24-510*NF EN 3723:1996 Aerospace series. Nuts, hexagonal, self-locking, in heat resisting steel fe-PA92HT (A286), MOS2 coated. Classification : 1100 MPa (at ambient temperature) / 425 degrees celsius.
NF L24-675*NF EN 2910:1994 Aerospace series. Shank nuts, self-locking, in heat resisting steel fe-PA92HT (A286). Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.
NF L23-004*NF EN 4421:2007 Aerospace series - Studs, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel - Strength class : 1 100 MPa (at ambient temperature)
NF EN 3724:2005 Série aérospatiale - Vis à tête bihexagonale, fût dégagé, filetage long, en alliage de titane TI-P64001, revêtues MoS2 - Classe de résistance : 1 100 MPa (à température ambiante)
NF L24-684:2001 Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification: 1 100 MPa (at ambient temperature) / 650 o C.
NF L24-684*NF EN 3014:2015 Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification : 1 100 MPa (at ambient temperature)/650 oC
NF L24-511*NF EN 2809:2001 Aerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, silver plated - Classification : 900 MPa (at ambient temperature) / 650o C
NF L24-512*NF EN 2810:2001 Aerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification : 900 MPa (at ambient temperature) / 650o C
NF L24-117*NF EN 3007:1996 Aerospace series. Bolts, hexagon head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286), silver plated. Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.
NF L24-664*NF EN 3012:1996 Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy ni-P101HT (waspaloy). Classification: 1210 MPa (at ambient temperature) / 730 degrees celsius.
NF B43-362:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature
NF L24-385*NF EN 2935:1996 Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy). Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.
NF L24-382*NF EN 2932:1996 Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286), silver plated. Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.
NF C93-524:1981 Electronic components. Insulated wires for high temperatures up to ISO grade C. General requirements.
NF L24-685:2001 Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) silver plated - Classification : 1 100 MPa (at ambient temperature) / 650 o C.
NF L24-672*NF EN 2906:1994 Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting steel fe-PA92HT (A286). Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.
NF L24-685*NF EN 3015:2015 Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated - Classification : 1 100 MPa (at ambient temperature)/650 oC
NF L24-673*NF EN 2907:1996 Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting steel fe-PA92HT (A286), silver plated. Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.
NF L24-676*NF EN 2911:1995 Aerospace series. Sank nuts, self-locking, in feat resisting steel fe-PA92HT (A286), silver plated. Classification : 1 100 MPa (at ambient temperature) / 650 degrees celsius.
NF L24-161*NF EN 3303:1997 Aerospace series. Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification : 1100 MPa (at ambient temperature) / 235 degrees Celsius.
NF L24-189*NF EN 3759:1997 Aerospace series. Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated. Classification : 1100 MPa (at ambient temperature) / 425 degrees celsius.
NF L24-212*NF EN 2926:1996 Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286), silver plated. Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.
NF L24-383*NF EN 2933:1996 Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718). Classification : 1275 MPa (at ambient temperature) / 650 degrees celsius.
NF EN 2930:1996 Série aérospatiale - Vis à tête bihexagonale, fût dégagé, filetage long, en alliage résistant à chaud à base de nickel Ni-P101HT (Waspaloy), argentées - Classification : 1210 MPa (à température ambiante) / 735 degrés Celsius.
NF EN ISO 10644:2009 Vis en acier à rondelle plate incorporée - Rondelles de classes de dureté 200 HV et 300 HV
NF L24-514*NF EN 3536:2007 Aerospace series - Nuts, hexagon, self-locking, in heat resisting, steel, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 oC.
NF L24-381*NF EN 2931:1994 Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286). Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.
NF L24-211*NF EN 2925:1994 Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286). Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.
NF L24-515*NF EN 3626:2007 Aerospace series - Nuts, hexagon, self-locking, in steel, cadmium plated, MoS2 lubricated - Classification : 1100 MPa (at ambient temperature)/235oC
NF L24-507*NF EN 2647:2006 Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS2 lubricated - Classification : 900 MPa (at ambient temperature)/235 oC
NF L24-386*NF EN 2936:1996 Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), silver plated. Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.
NF B43-306*NF EN 12289:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at ambiant temperature - Determination of in-plane shear properties
NF L24-384*NF EN 2934:1996 Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718), silver plated. Classification : 1275 MPa (at ambient temperature) / 650 degrees celsius.
NF L24-013*NF EN 3726:2005 Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS2 coated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L24-478*NF EN 3019:2008 Aerospace series - Self-locking plate nuts, floating, two-lug, in heat resisting steel FE-PA92HT (A286) - Classification : 1 100 MPa (at ambient temperature)/650 oC.
NF L24-506*NF EN 4116:2005 Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification : 1 100MPa (at ambient temperature) / 425 oC
NF L24-669*NF EN 2908:1994 Aerospace series. Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel fe-PA92HT (A286). Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.
NF L24-177*NF EN 3725:2005 Aerospace series - Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS2 coated - Strength class : 1 100 MPa (at ambient temperature)
NF L24-133*NF EN 3035:1997 Aerospace series. Screws, 100 degrees countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification : 1100 MPa (at ambient temperature) / 235 degrees celsius.
NF L24-235*NF EN 3444:2007 Aerospace series - Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification : 1 250 MPa (at ambient temperature)/650oC
NF L24-135*NF EN 3305:1997 Aerospace series. Screws, 100 degrees countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification : 1100 MPa (at ambient temperature) / 235 degrees celsius.
NF L24-137*NF EN 3381:1997 Aerospace series. Screws, 100 degrees countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature) / 315 degrees celsius.

Association of German Mechanical Engineers, Indoor temperature class

VDI 2083 Blatt 1-2005 Cleanroom technology - Particulate air cleanliness classes

Professional Standard - Aerospace, Indoor temperature class

QJ 2214-1991 Cleanliness level and evaluation in clean room (area)

BR-ABNT, Indoor temperature class

Hubei Provincial Standard of the People's Republic of China, Indoor temperature class

DB42/T 2058-2023 Continuous low temperature rain and snow freezing process intensity level

中国气象局, Indoor temperature class

QX/T 548-2020 Solar cell power generation efficiency temperature impact level

国家市场监督管理总局、中国国家标准化管理委员会, Indoor temperature class

GB/T 40408-2021 Nuclear grade isostatic graphite for high temperature gas-cooled reactor internals
GB 30255-2019 Minimum allowable values of energy efficiency and energy efficiency grades of LED products for indoor lighting
GB/T 25915.9-2018 Cleanrooms and associated controlled environments—Part 9: Classification of surface cleanliness by particle concentration
GB/T 25915.1-2021 Cleanrooms and associated controlled environments—Part 1: Classification of air cleanliness by particle concentration
GB/T 25915.10-2021 Cleanrooms and associated controlled environments—Part 10: Classification of surface cleanliness by chemical concentration
GB 37480-2019 Minimum allowable values of energy efficiency and energy efficiency grades for low ambient temperature air source heat pumps（water chiller） packages
GB/T 25915.8-2021 Cleanrooms and associated controlled environments—Part 8: Classification of air cleanliness by chemical concentration (ACC)

Beijing Provincial Standard of the People's Republic of China, Indoor temperature class

DB11/T 745-2010 Method for measuring air temperature in residential heating room
DB11/T 1005-2021 Indoor Temperature Energy Saving Monitoring Standard for Public Buildings
DB11/T 745-2019 Measurement method of indoor air temperature in heated dwelling
DB11/T 1005-2013 Standards for energy-saving monitoring of air-conditioning and heating indoor temperature in public buildings

Chongqing Provincial Standard of the People's Republic of China, Indoor temperature class

DB50/ 250-2015 Regulations on temperature control of indoor air conditioners in public buildings

Professional Standard - Chemical Industry, Indoor temperature class

HG 20625-1997 Steel Pipe Flange Pressure Temperature Ratings (American System)
HG 20625-1997（编制说明） Steel Pipe Flange Pressure Temperature Ratings (American System)
HG 20604-1997 Steel pipe flange pressure temperature rating (European system)
HG 20604-1997（编制说明） Steel pipe flange pressure temperature rating (European system)

AT-ON, Indoor temperature class

ONORM M 7330-1980 Details on pressures and temperatures of nternal or external pressure containing components; erms and definitions, pressure ratings
OENORM EN ISO 14705:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature (ISO 14705:2016)

BE-NBN, Indoor temperature class

NBN-EN 2939-1995 Aerospace series - Screws, 100° coutersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification : 900 MPa (at ambient temperature)/650 °C
NBN-EN 2937-1995 Aerospace series - Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification : 900 MPa (at ambient temperature)/650 °C
NBN S 01-201-1979 Acoustics - Determination of sound power levels of noise sources -Precision raethods for broad-band sources in reverberation rooms
NBN-EN 3196-1995 Aerospace series - Nuts, jexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification : 1 100 MPa (at ambient temperature)/425°C

JP-JCS, Indoor temperature class

JCS 1363-2009 High strength grade thermo resistant aluminium alloy conductors ,steel reinforced

IT-UNI, Indoor temperature class

UNI 6433-1969
UNI 6432-1969
UNI EN ISO 14705:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature

Professional Standard - Radio Television Film, Indoor temperature class

GYJ 43-1990 Indoor environmental requirements for technical rooms at broadcast and television centers (temperature, humidity, and luminance)

RU-GOST R, Indoor temperature class

GOST R ISO 17499-2016 Carbonaceous materials used in the production of aluminium. Determination of baking level expressed by equivalent temperature
GOST R 54943-2012 Buildings and structures. Method for determining discomfort glare rating in interior lighting
GOST 8.367-1979 State system for ensuring the uniformity of measurments. Reference gauge-blocks of the 1st and the 2nd accuracy orders and working gauge-blocks of 00 and 0 accuracy classes up to 1000 mm. Methods and means for verification
GOST 8.353-1996 State system for ensuring the uniformity of measurements. Standard line measures of length of the first grade and working line measures of the zero accuracy class to 1 m length. Method for verification
GOST 8.353-1979 State system for ensuring the uniformity of measurements. Standard rigid length measures of the olst accuracy order and working length measures of the 0 accuracy class to 1 m. Methods and means for verificatton

YU-JUS, Indoor temperature class

JUS B.E4.353-1977 Laboratory gkssware and accessories - Encbsed - scale cabrimeter thermometers
JUS B.E4.357-1977 Laboratory glassware and accessories - Short enclose? - scale thermometers for precision use
JUS B.E4.356-1977 Laboratory glassware and accessories - Long encbsed - scale thermometers for precision use

Lithuanian Standards Office , Indoor temperature class

LST EN 3303-2001 Aerospace series - Screw, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235°C
LST EN ISO 14705:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature (ISO 14705:2016)

KR-KS, Indoor temperature class

KS W ISO 9199-2020 Aerospace — Nuts, bihexagonal, selflocking, MJ threads,classifications: 1 100 MPa (at ambient temperature)/425 °C, 1 100MPa (at ambient temperature)/650 °C, 1 210 MPa (at ambient temperature)/425 °C,
KS W ISO 8940-2020 Aerospace — Nuts, anchor, self-locking, sealing, floating, two-lug,with counterbore, with MJ threads, classifications:900 MPa (at ambient temperature)/120 °C,900 MPa (at ambient temperature)/175 °C an
KS L ISO 14705-2018 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature

Professional Standard - Machinery, Indoor temperature class

JB/T 51088-1999 Product quality classification of spring tube thermometers for tractors and internal combustion engines

Aerospace, Security and Defence Industries Association of Europe (ASD), Indoor temperature class

ASD-STAN PREN 3303-1995 Aerospace Series Screws, Cap Head, Hexagon Socket, Coarse Tolerance Normal Shank, Medium Length Thread, in Alloy Steel, Cadmium Plated Classification : 1 100 MPa (at Ambient Temperature)/235 Degrees C (Edition P 2)
ASD-STAN PREN 2868-1993 Aerospace Series Nuts, Hexagonal, Slotted/Castellated, Normal Height, Normal Across Flats, in Heat Resisting Steel, Silver Plated Classification : 1 100 MPa (at Ambient Temperature) / 650 Degrees C (Edition P 1)
ASD-STAN PREN 2895-1993 Aerospace Series Nuts, Hexagonal, Plain, Normal Height, Normal Across Flats, in Corrosion Resisting Steel, Passivated Classification : 900 MPa (at Ambient Temperature) / 425 Degrees C (Edition P 1)
ASD-STAN TR 3791-1999
ASD-STAN PREN 2869-1993 Aerospace Series Nuts, Hexagonal, Slotted/Castellated, Normal Height, Normal Across Flats, in Heat Resisting Steel, Passivated Classification : 1 100 MPa (at Ambient Temperature) / 650 Degrees C (Edition P 1)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Indoor temperature class

ASHRAE NA-04-2-4-2004 Do People Like to Feel"Neutral"? Response to the ASHRAE Scale for Subjective Warmth in Relation to Thermal Preference, Indoor and Outdoor Temperature
ASHRAE NA-04-8-4-2004 Predicting Indoor Temperature and Humidity Conditions Including Hygrothermal Interactions with the Building Envelope
ASHRAE 4747-2005 Neural-Based Air-Handling Unit for Indoor Relative Humidity and Temperature Control

CU-NC, Indoor temperature class

NC 30-59-1987 Plastics. PVC Resins for General Use. Determination of Plasticizer Absorption at Room Temperature

Danish Standards Foundation, Indoor temperature class

DS/ISO 13261-2:2002 Sound power rating of air-conditioning and air-source heat pump equipment - Part 2: Non-ducted indoor equipment

Society of Automotive Engineers (SAE), Indoor temperature class

SAE AMS3373/2A-2001 Compound, Silicone Rubber, Insulating and Sealing Oil and Reversion Resistant, Medium Viscosity, Room Temperature Cure
SAE AMS3373/2-1981 COMPOUND, SILICONE RUBBER, INSULATING AND SEALING Oil and Reversion Resistant, Medium Viscosity, Room Temperature Cure

CH-SNV, Indoor temperature class

SN EN ISO 14705:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature (ISO 14705:2016)

PL-PKN, Indoor temperature class

PN-EN ISO 14705-2021-06 E Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for hardness of monolithic ceramics at room temperature (ISO 14705:2016)