ZH

RU

ES

Ammonia detection method and basis

Ammonia detection method and basis, Total:108 items.

In the international standard classification, Ammonia detection method and basis involves: Non-destructive testing, Air quality, Construction materials, Analytical chemistry, Internal combustion engines, Milk and milk products, Mechanical structures for electronic equipment, Electrical and electronic testing, Alarm and warning systems, Non-metalliferous minerals, Fuels, Fruits. Vegetables, Explosion protection, Electrical equipment for working in special conditions, Water quality, Medical sciences and health care facilities in general, Fluid storage devices, Road engineering, Rubber and plastics products, Measurement of volume, mass, density, viscosity, Internal combustion engines for road vehicles, Protection against fire, Motor cycles and mopeds, Quality, Metrology and measurement in general.


Association Francaise de Normalisation, Ammonia detection method and basis

  • NF U42-142*NF EN 15476:2009 Fertilizers - Determination of nitric and ammoniacal nitrogen according to Devarda
  • NF ISO 16247:2006 Véhicules routiers - Détection des fuites du dispositif d'échappement - Méthode d'essai à l'hélium et spécification du dispositif de détection
  • NF C23-564:1995 Electrical apparatus for the detection and measurement of oxygen performance requirements and test methods.
  • NF EN 50104:2019 Appareils électriques de détection et de mesure de l'oxygène - Exigences d'aptitude à la fonction et méthodes d'essai
  • NF EN 50104/A1:2023 Appareils électriques de détection et de mesure de l'oxygène - Exigences d'aptitude à la fonction et méthodes d'essai
  • NF C23-564*NF EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
  • NF X31-017*NF ISO 20951:2019 Soil Quality - Guidance on methods for measuring greenhouse gases (CO2, N2O, CH4) and ammonia (NH3) fluxes between soils and the atmosphere
  • NF C23-676*NF EN 50676:2019 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods
  • NF X43-285*NF EN ISO 17621:2015 Workplace atmospheres - Short-term detector tube measurement systems - Requirements and test methods
  • NF EN ISO 17621:2015 Air des lieux de travail - Systèmes de mesurage par tube détecteur à court terme - Exigences et méthodes d'essai
  • NF EN 50545-1/A1:2016 Appareil électrique de détection et de mesure de gaz combustible et toxique dans les parcs de stationnement et les tunnels - Partie 1 : exigences de performance générales et méthodes pour la détection et la mesure du monoxyde de carbone et d'oxy...
  • NF C23-591-1*NF EN 50291-1:2018 Gas detectors - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1 : test methods and performance requirements
  • NF C23-560-1/A11:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 1 : general requirements and test methods.
  • NF C23-560-1:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 1 : general requirements and test methods.
  • NF EN 50676:2019 Appareils électriques utilisés pour la détection et la mesure de la concentration de gaz frigorigènes - Exigences de performance et méthodes d'essai

Japanese Industrial Standards Committee (JISC), Ammonia detection method and basis

  • JIS Z 2333:1993 Test method for leaks using ammonia gas
  • JIS B 8004:2005 Reciprocating internal combustion engines -- Determination and method for the measurement of engine power -- Additional requirements for exhaust emission tests in accordance with ISO 8178

Professional Standard - Coal, Ammonia detection method and basis

  • MT 278-1994 Harmful gas existing in mine air Detection method of ammonia gas(detector tube method)

YU-JUS, Ammonia detection method and basis

  • JUS H.F8.057-1981 Ammonia anhydrous. Sampling and methods of tests
  • JUS H.N8.151-1989 Testing of paper and board. Determination of roughness/smoothness (air leak methods). General method
  • JUS H.N8.126-1987 Testing of paper and board. Determination ofair permeance (medium range). General method
  • JUS B.H8.012-1985 Petroleum and petroleum products. Determination and application of precision data in relation to methods of test

Standard Association of Australia (SAA), Ammonia detection method and basis

  • AS 4459.1:1999 Methods of sampling and testing ceramic tiles - Sampling and basis for acceptance
  • AS/NZS 4641(Int):2005 Electrical apparatus for detection of oxygen and other gases and vapours at toxic levels--General requirements and test methods
  • AS/NZS 4641:2018 Electrical equipment for detection of oxygen and other gases and vapours at toxic levels — General requirements and test methods
  • AS/NZS 3580.1.1:2007 Methods for sampling and analysis of ambient air - Guide to siting air monitoring equipment

Heilongjiang Provincial Standard of the People's Republic of China, Ammonia detection method and basis

Military Standard of the People's Republic of China-General Armament Department, Ammonia detection method and basis

  • GJB 533.10-1988 Detection method for 45 components of submarine cabin air. Determination of ammonia content. Calibration tube method
  • GJB 533.18-1988 Detection methods for 45 components of submarine cabin air Determination of acrolein content Tryptophan absorbance method
  • GJB 533.19-1988 Methods for detection of 45 components of submarine cabin air. Determination of sodium sarcosinate and dimethylamine content. Copper reagent absorbance method.

Korean Agency for Technology and Standards (KATS), Ammonia detection method and basis

  • KS R ISO 14396:2006 Reciprocating internal combustion engines-Determination and method for the measurement of engine power-Additional requirements for exhaust emission tests in accordance with ISO 8178
  • KS R ISO 16247-2006(2016) Road vehicles-Detection of exhaust system leaks-Helium test method and detection device specification
  • KS R ISO 16247-2006(2021) Road vehicles-Detection of exhaust system leaks-Helium test method and detection device specification
  • KS R 1046-2001 Road vehicles &##8211; Measurement methods for exhaust gasemissions during inspection or maintenance
  • KS C 6598-2007(2018) Electrical apparatus for the detection of combustible gases in domestic premises-Test methods and performance requirements
  • KS C IEC 61779-1-2003(2018)

International Organization for Standardization (ISO), Ammonia detection method and basis

  • ISO 14396:2002 Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178

Professional Standard - Agriculture, Ammonia detection method and basis

  • JAP-159 Detection method of ivermectin, ipremectin and muxidine
  • JAP-007 Detection method of oxfendazole, fenthiocarbamate and fenthiobendazole
  • NY/T 448-2001 Rapid bioassay of organophosphate and carbamate pesticide residues in vegetables

国家文物局, Ammonia detection method and basis

  • WW/T 0047-2012 Gas Diffusion Sampling and Determination Method for Environmental Detection of Cultural Relics Preservation in Collections Determination of Ammonia

Professional Standard - Commodity Inspection, Ammonia detection method and basis

  • SN/T 0285-2012 Determination of ethyl carbamate residues in alcohol for export-GC-MS
  • SN/T 3529-2013 Determination of 2,4-diaminophenol,2,3-diaminophenol and 2,4-diaminoanisole in hair dyes for import and export

RU-GOST R, Ammonia detection method and basis

  • GOST ISO 14396-2015 Reciprocating internal combustion engines. Determination and method for the measurement of engine power. Additional requirements for exhaust emission tests in accordance with ISO 8178

European Committee for Standardization (CEN), Ammonia detection method and basis

  • EN ISO 14891:2002 Milk and Milk Products - Determination of Nitrogen Content - Routine Method Using Combustion According to the Dumas Principle
  • prEN 50104-1992 Electrical apparatus for the detection and measurement of oxygen; performance requirements and test methods
  • EN 50194:2000 Electrical Apparatus for the Detection of Gases in Domestic Premises - Test Methods and Performance Requirements
  • EN 50054:1998 Electrical Apparatus for the Detection and Measurement of Combustible Gases - General Requirements and Test Methods
  • EN 50054:1991 Electrical apparatus for the detection and measurement of combustible gases; general requirements and test methods

HU-MSZT, Ammonia detection method and basis

International Electrotechnical Commission (IEC), Ammonia detection method and basis

  • IEC 62610-2:2018 Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling

Danish Standards Foundation, Ammonia detection method and basis

  • DS/EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
  • DS/EN 50291-1:2021 Gas detectors – Electrical apparatus for the detection of carbon monoxide in domestic premises – Part 1: Test methods and performance requirements
  • DS/EN 1231:1997 Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods

Lithuanian Standards Office , Ammonia detection method and basis

  • LST EN 50104-2010 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
  • LST EN 1231-2001 Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods
  • LST EN 50291-1/AC-2021 Gas detectors - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirements

AENOR, Ammonia detection method and basis

  • UNE-EN 50104:2011 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods

CENELEC - European Committee for Electrotechnical Standardization, Ammonia detection method and basis

  • PREN 50104-2018 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
  • EN 50104:1995 Electrical Apparatus for the Detection and Measurement of Oxygen Performance Requirements and Test Methods
  • EN 50104:1998 Electrical Apparatus for the Detection and Measurement of Oxygen - Performance Requirements and Test Methods
  • EN 50104:2002 Electrical Apparatus for the Detection and Measurement of Oxygen - Performance Requirements and Test Methods
  • EN 61779-1:2000 Electrical Apparatus for the Detection and Measurement of Flammable Gasesm Part 1: General Requirements and Test Methods

ES-UNE, Ammonia detection method and basis

  • UNE-EN 50104:2021 Electrical equipment for the detection and measurement of oxygen - Performance requirements and test methods
  • UNE-EN 50104:2021/A1:2023 Electrical equipment for the detection and measurement of oxygen - Performance requirements and test methods
  • UNE-EN 50676:2019 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods (Endorsed by Asociación Española de Normalización in February of 2020.)

Professional Standard - Geology, Ammonia detection method and basis

Compressed Gas Association (U.S.), Ammonia detection method and basis

  • CGA C-17-2014 Methods to avoid and detect internal gas cylinder corrosion

American Society for Testing and Materials (ASTM), Ammonia detection method and basis

  • ASTM D7493-08 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
  • ASTM D5932-08(2013) Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace
  • ASTM D5932-08 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace
  • ASTM D7493-22 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection

Shandong Provincial Standard of the People's Republic of China, Ammonia detection method and basis

  • DB37/T 333-2002 Rapid detection method for organophosphorus and carbamate pesticide residues in fruits

British Standards Institution (BSI), Ammonia detection method and basis

  • BS EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
  • BS EN 50104:2002 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
  • BS EN 50054:1991 Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods
  • BS EN 50054:1999 Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods
  • BS EN 50104:2019+A1:2023 Electrical equipment for the detection and measurement of oxygen. Performance requirements and test methods
  • BS EN 50104:1999 Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
  • BS EN 50104:2019 Electrical equipment for the detection and measurement of oxygen. Performance requirements and test methods
  • BS EN 61779-1:2000 Electrical apparatus for the detection and measurement of flammable gases - General requirements and test methods
  • BS 6020-1:1981 Instruments for the detection of combustible gases - Specification for general requirements and test methods
  • BS ISO 12828-1:2011 Validation method for fire gas analysis. Limits of detection and quantification
  • BS ISO 17479:2013 Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
  • BS ISO 19449:2015 Mopeds. Measurement methods for gaseous exhaust emissions during inspection or maintenance
  • BS EN 50194-1:2009 Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements
  • BS EN 50194-2:2006+A1:2016 Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements
  • BS ISO 11843-6:2013 Capability of detection. Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
  • 22/30449510 DC BS EN 50104 AMD1. Electrical equipment for the detection and measurement of oxygen. Performance requirements and test methods
  • BS EN ISO 80079-20-1:2019 Explosive atmospheres - Material characteristics for gas and vapour classification. Test methods and data

European Committee for Electrotechnical Standardization(CENELEC), Ammonia detection method and basis

  • EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
  • EN 50676:2019 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods

SE-SIS, Ammonia detection method and basis

  • SIS SS-EN 50 054-1992 Electrical apparatus for the detection and measurement of combustible gases — General requirements and test methods
  • SIS SS 01 42 14-1979 Statistical interpretation of data — Power of tests relating to means and variances

Indonesia Standards, Ammonia detection method and basis

  • SNI 06-6989.30-2005 Water and wastewater - Part 30: Test methods of ammonia content with spectrophotometers by phenates
  • SNI 03-6835-2002 Tes method of effect of heat and air on a moving film of asphal (rolling thin film oven test)

German Institute for Standardization, Ammonia detection method and basis

  • DIN 38406-5:1983-10 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of ammonia-nitrogen (E 5)
  • DIN 51899:2010-09 Gas analysis - Measurement programs and data evaluation procedures for gas chromatography and other comparison methods; only on CD-ROM / Note: To be amended by DIN 51899/A1 (2022-01).

BE-NBN, Ammonia detection method and basis

  • NBN-EN 50054-1993 Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods

Group Standards of the People's Republic of China, Ammonia detection method and basis

  • T/SDZDH 002-2020 Mask ventilation resistance and pressure difference detector Calibration method

Professional Standard - Machinery, Ammonia detection method and basis

  • JB/T 6916-1993 In-service high pressure cylinder - Checking and assessment method of acoustic emission

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Ammonia detection method and basis

  • GB/T 31354-2014 Determination of oxygen gas transmission rate through dry packages.Coulometric sensor

Professional Standard - Traffic, Ammonia detection method and basis

  • JT/T 93-1994 General electrical testing methods and technical requirements for port machinery

未注明发布机构, Ammonia detection method and basis

  • BS EN 61779-1:2000(2004) Electrical apparatus for the detection and measurement of flammable gases — Part 1 : General requirements and test methods

PL-PKN, Ammonia detection method and basis

  • PN-EN 50291-1-2018-06/AC-2021-03 E Gas detectors -- Electrical apparatus for the detection of carbon monoxide in domestic premises -- Part 1: Test methods and performance requirements

KR-KS, Ammonia detection method and basis

  • KS C 6598-2007(2023) Electrical apparatus for the detection of combustible gases in domestic premises-Test methods and performance requirements




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved