ZH
RU
ES
UV light test
UV light test, Total:358 items.
In the international standard classification, UV light test involves: Plastics, Solar energy engineering, Analytical chemistry, Components for electrical equipment, Organic chemicals, Products of the textile industry, Optics and optical measurements, Ceramics, Non-ferrous metals, Environmental testing, Electrical wires and cables, Terminology (principles and coordination), Fuels, Electronic component assemblies, Surface treatment and coating, Medical equipment, Rubber, Vocabularies, Optical equipment, Agricultural machines, implements and equipment, Horology, Road engineering, Water quality, Non-metalliferous minerals, Diagnostic, maintenance and test equipment, Farming and forestry, Textile fibres, Glass, Photography, Rubber and plastics products, Elements of buildings, Paints and varnishes, Products of the chemical industry, Components and accessories for telecommunications equipment, Radiation measurements, Aerospace electric equipment and systems, Paint coating processes, Clothes, Graphic technology, Fibre optic communications, Electrical accessories, Environmental protection, Lamps and related equipment, Test conditions and procedures in general, Lubricants, industrial oils and related products, Adhesives, Metalliferous minerals, Electrical and electronic testing, Protection against fire, Inks. Printing inks, Protective equipment, Headgear. Clothing accessories. Fastening of clothing, Metrology and measurement in general, Body care equipment, Occupational safety. Industrial hygiene, Microbiology, Construction materials, Protection against dangerous goods, Non-destructive testing, Waxes, bituminous materials and other petroleum products, Road vehicles in general, Petroleum products in general, Miscellaneous domestic and commercial equipment, Internal combustion engines for road vehicles, Protection against crime, Road vehicle systems, Natural gas.
Professional Standard - Electron, UV light test
- SJ/T 11855-2022 Photovoltaic UV aging test chamber irradiation performance test method
Standard Association of Australia （SAA）, UV light test
- AS/NZS 2433:1994 Plastics - Method for exposure to ultraviolet lamps
- AS/NZS 4257.7:1994 Plastic roof and wall cladding materials - Methods of test - Determination of colourfastness, light transmission and impact resistance following ultraviolet light exposure
International Electrotechnical Commission (IEC), UV light test
Japanese Industrial Standards Committee (JISC), UV light test
- JIS K 7350-3:1996 Plastics -- Methods of exposure to laboratory light sources -- Part 3: Fluorescent UV lamps
- JIS R 1709:2007 Light source for test of photocatalytic materials used under ultraviolet
- JIS L 0842:1996 Test methods for colour fastness to ultraviolet carbon arc lamp light
- JIS B 7752:1980 Light-and-water-exposure apparatus (enclosed carbon-arc type)
- JIS H 8685-2:1999 Accelerated test methods for light fastness of coloured anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Test for light fastness to ultra-violet light
- JIS K 7350-3:2008 Plastics -- Methods of exposure to laboratory light sources -- Part 3: Fluorescent UV lamps
- JIS R 1709:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Light source for test of photocatalytic materials used under ultraviolet
- JIS T 9253:2004 Performance and test method of ultraviolet ray hardening resinous braille
- JIS K 5600-7-8:1999 Testing methods for paints -- Part 7: Long-period performance of film -- Section 8: Accelerated weathering (Exposure to fluorescent UV lamps)
- JIS Z 4606:1995 Industrial X-ray apparatus for radiographic testing
- JIS K 7200:1986 Standard reference test specimens for calibrating a laboratory light exposure apparatus
- JIS D 1619:1977 Photometric testing methods of lighting and signalling equipment for automobiles
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, UV light test
- GB/T 19394-2003 UV test for Photovoltai (PV) modules
- GB/T 31899-2015 Textile.Tests for weather resistance.UV light exposure
- GB/T 30457-2013 Test methods of rare earth ultraviolet emission phosphors for fluorescent lamps
- GB/T 16422.3-1997 Plastics--Methods of exposure to laboratory light sources--Part 3: Fluorescent UV lamps
- GB/T 16422.3-2014 Plastics.Methods of exposure to laboratory light sources.Part 3 :Fluorescent UV lamps
- GB/T 30809-2014 UV light sources for testing properties of photocatalytic materials
- GB/T 11417.9-2012 Ophthalmic optics.Contact lenses.Part 9:Ageing by exposure to UV and visible radiation(in vitro method)
- GB/T 16585-1996 Rubber,vulcanized--Test method of resistance to artificial weathering (Fluorescent UV lamp)
- GB/T 15489.8-1995 Colour filter glass test methods Resistance UV irradiating stability
- GB/T 7962.17-2010 Test methods of colourless optical glass.Part 17:Autocollimation test method for refractive index in the ultraviolet and infrared wave band
- GB/T 9721-1988 Chemical reagent--General rules for the molecular absorption spectrophotometry(ultraviolet and visible)
- GB/T 9721-2006 chemical reagent General rules for the molecular absorption spectrophotometry (ultraviolet and visible)
- GB 9721-1988 Molecular Absorption Spectrophotometry of Chemical Reagents General Rules (Ultraviolet and Visible Parts)
- GB/T 7962.18-1987 Colourless optical glass test methods--Autocollimation test method for refractive index in the ultraviolet and infrared wave band
- GB/T 7962.17-1987 Colourless optical glass test methods--Least deviation angular test method for refractive index in the ultraviolet and infrared wave band
- GB/T 17032-1997 Textiles--Testing method for transmission of ultraviolet ray
- GB/T 30671-2014 Ultraviolet curable varnishing process control requirements and testing methods for paper prints
- GB 12791-1991 Performance requirements and test methods for point ultraviolet flame detectors
- GB/T 29883-2013 Packaging for dangerous goods.Rigid plastics intermediate bulk containers.Methods of exposure to laboratory light sources(fluorescence UV lamp)
- GB/T 14522-2008 Artificial weathering test method for plastics,coating and rubber materials used for machinery industrial products.Fluorescent UV lamps
- GB/T 31881-2015 Accelerated weathering test methods of automotive nonmetal components and materials using a fluorescent UV and condensation apparatus
- GB/T 19267.2-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 2:Ultraviolet-visible absorption spectroscopy
- GB/T 19267.2-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 2: Ultraviolet-visible absorption spectroscopy
American Society for Testing and Materials (ASTM), UV light test
- ASTM E2193-16 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
- ASTM G53-96 Practice for Operating Light- and Water-Exposure Apparatus (Fluorescent UV-Condensation Type) for Exposure of Nonmetallic Materials
- ASTM E2193-23 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
- ASTM E2193-04 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM E2193-02a Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM E2193-02 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM E2193-08 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM D5208-01 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
- ASTM D5208-91 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
- ASTM D5208-09 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
- ASTM D5208-14 Standard Practice for Fluorescent Ultraviolet 40;UV41; Exposure of Photodegradable Plastics
- ASTM D1148-13 Standard Test Method for Rubber Deteriorationmdash;Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
- ASTM D1840-22 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM D1148-13(2018) Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
- ASTM D1840-03 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM D1840-01 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM D1840-96 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM D1840-02 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM D1017-51(1978)e1 Test Method for Benzene and Toluene in 250F and Lighter Petroleum Products by Ultraviolet Spectrophotometry
- ASTM D1840-07 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM D1840-07(2013) Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM D7183-16 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D1840-07(2017) Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM D7238-06 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
- ASTM D1148-95(2001) Standard Test Method for Rubber Deterioration8212;Heat and Ultraviolet Light Discoloration of Light-Colored Surfaces
- ASTM G130-95(2002) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
- ASTM G130-95 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
- ASTM G130-06 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
- ASTM D7183-12 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM G130-12(2020) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
- ASTM D7183-23 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D7183-18 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D7183-07e1 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D7183-07 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D7183-18a(2023) Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D7183-18a Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D7183-15 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D7183-18ae1 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM G130-12 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
- ASTM D7238-06(2012) Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
- ASTM D6625-13 Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus
- ASTM D5453-05 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
- ASTM D3658-01(2016) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
- ASTM E878-12 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
- ASTM E878-20 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
- ASTM E2073-09 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
- ASTM E2073-19 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
- ASTM E2073-19a Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
- ASTM E3179-18 Standard Test Method for Determining Antimicrobial Efficacy of Ultraviolet Germicidal Irradiation against Influenza Virus on Fabric Carriers with Simulated Soil
- ASTM D8496-23 Standard Test Method for Determination of Hydroquinone (HQ) Content in Vinyl Acetate Monomer (VAM) Using Ultraviolet-Visible (UV-Vis) Spectrophotometer
- ASTM D5453-03 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
- ASTM D5453-03a Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
- ASTM D5453-04 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
- ASTM D6667-04(2010) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM D4799/D4799M-08(2013)e1 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
- ASTM D2053-99(2004) Standard Test Method for Colorfastness of Zippers to Light
- ASTM D2053-99 Standard Test Method for Colorfastness of Zippers to Light
- ASTM D2269-99e1 Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
- ASTM D2269-99(2005) Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
- ASTM D2269-10 Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
- ASTM D2269-99 Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
- ASTM D2269-10(2015) Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
- ASTM D6667-21 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM D6667-01 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM D5453-00 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
- ASTM D5453-00e1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
- ASTM D6667-10 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM D6667-14(2019) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM D6667-04 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM D6667-14 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM D4799/D4799M-17(2023) Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
- ASTM D6544-00 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
- ASTM D4144-94(2005) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
- ASTM D6544-00(2007) Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
- ASTM D4144-94(2010) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
- ASTM D6544-21 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
- ASTM D2008-23 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D2269-10(2020) Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
- ASTM D2053-99(2010) Standard Test Method for Colorfastness of Zippers to Light
- ASTM D2053-99(2015) Standard Test Method for Colorfastness of Zippers to Light
- ASTM D4799/D4799M-17 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
- ASTM D2008-91(1996)e1 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D2008-91(2001) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D2008-85 Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D4144-94(1999) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
- ASTM D2008-91(2006) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D2008-12 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D2008-09 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D4144-94(2014) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
- ASTM D1768-89(1995)e1 Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
- ASTM E878-01 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Untraviolet Spectrometry
- ASTM E878-96 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Untraviolet Spectrometry
- ASTM E878-01(2005) Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrometry
- ASTM E878-11 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrometry
- ASTM D7551-10(2015) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence
General Motors Corporation (GM), UV light test
- GM 9984266-1995 UV Stabilizer Coatings for Lighting Applications Revision A
RU-GOST R, UV light test
- GOST R IEC 61345-2013 Photovoltaic modules. UV test for photovoltaic modules
- GOST 2818-1991 Photographic materials. Spectrosensitometric test method
- GOST 33089-2014 Glass and glass products. Test method for resistance to UV-radiation
- GOST R 54183-2010 Glass and glass products. Test method for resistance to UV-radiation
- GOST R 8.759-2011 State system for ensuring the uniformity of measurements. Measurement of irradiance and dose ultraviolet radiation in photobiology. Procedure of measurements
- GOST R 54350-2011 Lighting fittings. Light requirements and test methods
- GOST 27047-1986 Fluoroscopic screens. Basic parameters, general technical requirements and methods of test
- GOST 27570.32-1991 Safety of household and similar electrical appliances. Particular requirements for ultra-violet and ultra-red radiation skin treatment appliances for household use and test methods
- GOST 9160-1991 Photographic materials with transparent sublayer. Method of general sensitometric test of multilayer colour photographic materials
- GOST 9160-1982 Transparent sublayer photographic materials. General sensitometric test method for multilayer colour photographic materials
- GOST R 8.640-2008 State sysem for ensuring the uniformity of measurements. Radiometers of ultraviolet radiation measurements for photolithography technological processes testing. Verification methods
European Committee for Electrotechnical Standardization（CENELEC）, UV light test
- EN 61345:1998 UV Test for Photovoltaic (PV) Modules
- EN 61228:2008 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method
- EN 50289-4-17:2015 Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
Group Standards of the People's Republic of China, UV light test
- T/GDWCA 0101-2023 UV irradiation crosslinking equipment for wires and cables
- T/GDWCA 0085-2022 Ultraviolet light irradiation cross-linked polyethylene insulating compounds for wires and cables
- T/GBG 0010-2018 LED Lighting Standard Optical Component Interface and Performance Requirements: Ultraviolet 3535 Packaged Devices
- T/GAMA 29-2023 Optical performance testing method for 3D printed UV projectors
- T/FSAS 71-2023 Powder-sprayed aluminum alloy building profile anti-aging performance test method combined fluorescent ultraviolet lamp method
- T/FSAS 74-2023 Test method for aging resistance of powder-coated aluminum alloy building profiles combined with fluorescent ultraviolet lamp method
- T/CAB CSISA0015-2020 Requirements and test methods for UV LED curing ink in gravure printing
- T/QZAS 003-2017 Acceptance specification for outdoor solar photovoltaic lighting facilities in rural areas
- T/ZSA 39-2020 Characterization of Graphene - Work function - Ultraviolet photoelectron spectroscopy (UPS) method
- T/ZGIA 002-2020 Graphene Test Methods Determination of Work Function Ultraviolet Photoelectron Spectroscopy
- T/CI 073-2022 Test methods of optical properties of rare earth ceramic phosphors for laser-based lighting
- T/ZSA 1001.01-2016 Luminous flux attenuation accelerated test method for LED lighting products
- T/CI 101-2023 Test methods of reliability properties of rare earth ceramic phosphors for laser-based lighting
Indonesia Standards, UV light test
国家市场监督管理总局、中国国家标准化管理委员会, UV light test
- GB/T 14571.4-2022 Test method of ethylene glycol for industrial use—Part 4：Determination of ultraviolet transmittance—Ultraviolet spectrophotometric method
- GB/T 16422.3-2022 Plastics—Methods of exposure to laboratory light sources—Part 3: Fluorescent UV lamps
- GB/T 6324.10-2020 Test method of organic chemical products—Part 10: Determination of trace sulfur in organic liquid products—Ultraviolet fluorescence method
- GB/T 37131-2018 Nanotechnologies—Test method of semiconductor nanopowder using UV-Vis diffuse reflectance spectroscopy
Taiwan Provincial Standard of the People's Republic of China, UV light test
- CNS 11229-1985 Glass-Enclosed Carbon-Arc Type Apparatus for Artificial Light Exposure Tests
- CNS 15116-2007 UV test for photovoltaic (PV) modules
- CNS 14247-1998 Method of test for naphthalene hydrocarbons in aviation turbine fuels by ultravioet spectrophotometry
- CNS 11230-1985 Light-and-Water-Exposure Apparatus (Enclosed Carbon-Arc Type)
- CNS 12364-1988 Method of Test for Fiber Optic Devices ( FOTP-98 Fiber Optic Cable External Freezing Test)
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, UV light test
- GJB 2502.5-2006 Test method for thermal control coatings of spacecraft Part 5: Ultraviolet irradiation test in vacuum
- GJB 5494.22-2005 Test method of rifle grenade Part 22:Luminous intensity test of illuminating projectile
Military Standard of the People's Republic of China-General Armament Department, UV light test
- GJB 2502.5-2015 Test methods for spacecraft thermal control coatings Part 5: Vacuum-UV irradiation test
- GJB 506-1988 Testing method for spectral performance of UV filter quartz glass tubes
- GJB 5189-2004 Helicopter-borne ultraviolet warning equipment test site test method
- GJB 772.407-1989 Explosives test methods: UV spectrophotometric determination of components of TNT/RDX injected explosives
- GJB 9548-2018 Fiber optic gyroscope irradiation test method
- GJB 7059-2010 Test procedures for finalize the design of laser irradiation pod
- GJB 5214.2-2003 Special bomb effect test method Part 2: Luminous intensity test of illumination torch
- GJB 8697.22-2015 Rifle grenade test method Part 22: Luminous intensity test of illuminated rifle grenade
Korean Agency for Technology and Standards (KATS), UV light test
- KS M 5982-1995 Testing method for accelerated weathering by fluorescent UV condensation type
- KS K 0850-2009 Test method for ultraviolet blocking and sun protection factor of textiles
- KS B 5570-2017 Performance test for UV/Vis spectrophotometer
- KS C IEC 61345-2002(2017) UV test for photovoltaic(PV) modules
- KS C IEC 61345-2002(2022) UV test for photovoltaic(PV) modules
- KS M 9102-1996 Water quality-Determination of total mercury by flameless atomic absorption spectrometry(Method after pretreatment with ultraviolet radiation)
- KS M ISO 4892-3-2017(2022) Plastics－Methods of exposure to laboratory light sources－Part 3：Fluorescent UV lamps
- KS D 8341-2-2002(2017) Accelerated test methods for light fastness of coloured anodic oxide coatings on aluminium and aluminium alloys－Part 2：Test for light fastness to ultra－violet lignt
- KS M ISO 16474-3-2017(2019) Paints and varnishes ㅡ Methods of exposure to laboratory light sources ㅡ Part 3: Fluorescent UV lamps
- KS D 8341-2-2002(2022) Accelerated test methods for light fastness of coloured anodic oxide coatings on aluminium and aluminium alloys－Part 2：Test for light fastness to ultra－violet lignt
- KS M ISO 16474-3:2016 Paints and varnishes ㅡ Methods of exposure to laboratory light sources ㅡ Part 3: Fluorescent UV lamps
- KS M ISO 16474-3:2017 Paints and varnishes ㅡ Methods of exposure to laboratory light sources ㅡ Part 3: Fluorescent UV lamps
- KS D 8341-2-2002 Accelerated test methods for light fastness of coloured anodic oxide coatings on aluminium and aluminium alloys－Part 2：Test for light fastness to ultra－violet lignt
- KS R 1066-2005 Photometric testing methods of lighting andsignalling equipment for automobiles
- KS R 1066-2005(2010) Photometric testing methods of lighting andsignalling equipment for automobiles
- KS M 5506-2011 Testing method for infrared reflectance (from spectrophotometric date)
- KS M 5506-1986 Testing method for infrared reflectance (from spectrophotometric date)
Professional Standard - Aviation, UV light test
- HB 5324-1993 Test method for ultraviolet fluorescence of anaerobic adhesives used in aviation
- HB 7398.1-1996 Test method for optical distortion of transparent parts - grid photography method
European Committee for Standardization (CEN), UV light test
- EN ISO 4892-3:2013 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
- EN ISO 4892-3:2016 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
- EN 13523-10:2017 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
- EN 13523-10:2010 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
- EN 13523-10:2001 Coil Coated Metals - Test Methods - Part 10: Resistance to Fluorescent UV Light and Water Condensation
- EN ISO 24442:2022 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection (ISO 24442:2022)
- EN ISO 24442:2011 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection (ISO 24442:2011)
- prEN ISO 4892-3 rev Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
- EN ISO 16474-3:2021 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2021)
- EN ISO 16474-3:2013 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
- EN 14255-1:2005 Measurement and assessment of personal exposures to incoherent optical radiation - Part 1: Ultraviolet radiation emitted by artificial sources in the workplace
- CEN EN 13523-10-2001 Coil Coated Metals - Test Methods - Part 10: Resistance to Fluorescent UV Light and Water Condensation
- EN ISO 11985:1997 Ophthalmic Optics - Contact Lenses - Ageing by Exposure to UV and Visible Radiation (in Vitro Method) ISO 11985:1997
CEN - European Committee for Standardization, UV light test
- EN ISO 4892-3:2006 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
Danish Standards Foundation, UV light test
- DS/EN 61345:1999 UV test for photovoltaic (PV) modules
- DS/EN 14187-8:2003 Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation
- DS/EN ISO 4892-3:2013 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
- DS/INSTA 518:1987 Flexible intermediate bulk containers. UV-resistance test
- DS/EN 13523-10:2010 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
- DS/ISO 16474-3:2021 Paints and varnishes – Methods of exposure to laboratory light sources – Part 3: Fluorescent UV lamps
- DS/EN ISO 16474-3:2021 Paints and varnishes – Methods of exposure to laboratory light sources – Part 3: Fluorescent UV lamps (ISO 16474-3:2021)
AENOR, UV light test
- UNE-EN 61345:1999 UV TEST FOR PHOTOVOLTAIC (PV) MODULES.
- UNE-EN 14187-8:2017 Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation
- UNE-EN 50289-4-17:2012 Communication cables - Specifications for test methods -- Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
- UNE-EN ISO 16474-3:2014 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2013)
Hunan Provincial Standard of the People's Republic of China, UV light test
British Standards Institution (BSI), UV light test
- BS EN 61345:1998 UV test for photovoltaic (PV) modules
- BS EN ISO 4892-3:1995 Plastics - Methods of exposure to laboratory light sources - Fluorescent UV lamps
- BS EN 13523-10:2001 Coil coated metals - Test methods - Resistance to fluorescent UV light and water condensation
- BS EN 13523-10:2010 Coil coated metals - Test methods - Resistance to fluorescent UV radiation and water condensation
- BS EN ISO 4892-3:2013 Plastics. Methods of exposure to laboratory light sources. Fluorescent UV lamps
- BS EN 14187-8:2003 Cold applied joint sealants - Test method for the determination of the artificial weathering by UV-irradiation
- BS ISO 19721:2022 Plastics. Abrasion test method for artificial turfs using combined UV exposure and mechanical wear
- BS EN ISO 24442:2011 Cosmetics. Sun protection test methods. In vivo determination of sunscreen UVA protection
- BS EN ISO 16474-3:2013 Paints and varnishes. Methods of exposure to laboratory light sources. Fluorescent UV lamps
- BS EN ISO 16474-3:2021 Paints and varnishes. Methods of exposure to laboratory light sources. Fluorescent UV lamps
- BS EN ISO 4892-3:2016 Tracked Changes. Plastics. Methods of exposure to laboratory light sources. Fluorescent UV lamps
- BS EN 50289-4-17:2011 Communication cables. Specifications for test methods. Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
- BS EN 14255-3:2008 Measurement and
assessment of personal
exposures to
incoherent optical
radiation —
Part 3: UV-Radiation emitted by
the sun
- 20/30383522 DC BS ISO 19721. Plastics. Abrasion test method for artificial turfs using combined UV exposure and mechanical wear
- BS EN 13758-1:2002 Textiles - Solar UV protective properties - Method of test for apparel fabrics
- BS EN 13758-1:2002(2007) Textiles - Solar UV protective properties - Method of test for apparel fabrics
- BS 8466:2006 Hats - Protection against solar UVR - Method of test and performance requirements
- BS IEC 61196-1-212:2021 Coaxial communication cables. Environmental test methods. UV stability
- BS EN 14187-8:2017 Tracked Changes. Cold applied joint sealants. Test methods. Determination of the artificial weathering by UV-irradiation
- BS EN 50289-4-17:2015 Tracked Changes. Communication cables. Specifications for test methods. Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
- BS ISO 10677:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet light source for testing semiconducting photocatalytic materials
- BS 3900-F19:2000 Methods of test for paint - Durability tests on paint films - Determination of resistance to cyclic corrosion conditions - Wet (salt fog)/dry/humidity/UV light - Part F19: Determination of resistance to cyclic corrosion conditions - Wet (salt fog)/dry/hum
- BS 2782-5 Method 540C:1988 Methods of testing plastics - Optical and colour properties, weathering - Determination of ultraviolet radiation intensity using polysulphone film
- 19/30397049 DC BS EN ISO 16474-3. Paints and varnishes. Methods of exposure to laboratory light sources. Part 3. Fluorescent UV lamps
- BS EN 60793-1-54:2013 Optical fibres. Measurement methods and test procedures Gamma irradiation
- BS 8628:2022 Disinfection using ultraviolet radiation. Methods for quantitative testing of automated ultraviolet disinfection activities by direct illumination. Determination of bactericidal, mycobactericidal, sporicidal, yeasticidal, fungicidal, virucidal…
- BS EN 13523-10:2017 Tracked Changes. Coil coated metals. Test methods. Resistance to fluorescent UV radiation and water condensation
- 21/30390982 DC BS 8628. Disinfection using ultraviolet radiation. Methods for quantitative testing of automated ultraviolet disinfection activities by direct illumination. Determination of bactericidal, mycobactericidal, sporicidal, yeasticidal, fungicidal, virucidal...
HU-MSZT, UV light test
Professional Standard - Petrochemical Industry, UV light test
- SH/T 0415-1992 Test method for ultraviolet absorbance value of petroleum products
Professional Standard - Aerospace, UV light test
- QJ 1991-1990 Vacuum—Test method for mass loss of materials irradiated by ultraviolet light
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., UV light test
- ASHRAE 3751-1994 Ultraviolet Light Irradiation of Potable Water for Legionella Colonization in a Hospital Water Distribution System
- ASHRAE 185.2-2014 Method of Testing Ultraviolet Lamps for Use in HVAC&R Units or Air Ducts to Inactivate Microorganisms on Irradiated Surfaces
American National Standards Institute （ANSI), UV light test
Professional Standard - Commodity Inspection, UV light test
- SN/T 2931-2011 Standard test method for naphthalenes in aviation turbine fuels by ultraviolet spectrophotometry
- SN 0340-1995 Method for the determination of paraquat residues in cereals,vegetables for export.UV-spectrophotometric method
Professional Standard - Environmental Protection, UV light test
- HJ 970-2018 Water Quality Determination of Petroleum by UV Spectrophotometry (Trial)
- HJ/T 346-2007 Water quality. Determination of nitrate-nitrogen. Ultraviolet spectrophotometry
Xinjiang Provincial Standard of the People's Republic of China, UV light test
- DB65/T 3653-2013 Artificial accelerated aging test method of fluorescent ultraviolet lamp for agricultural drip irrigation belt
Lithuanian Standards Office , UV light test
- LST EN 61345-2001 UV test for photovoltaic (PV) modules (IEC 61345:1998)
- LST EN 14187-8-2004 Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation
- LST EN 13523-10-2010 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
- LST EN ISO 4892-3:2006 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2006)
- LST EN ISO 16474-3:2021 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2021)
工业和信息化部, UV light test
- QB/T 5175.3-2018 Wearing environment test methods for watch appearance parts Part 3: Light test
PL-PKN, UV light test
- PN F06100-08-1988 Furniture Testing methods for the properties of lacquered and decorative luminated surfaces Determination of ultraviolet light resistance and light resistance degree
- PN Z04200-02-1988 Air purity protection ests for oxalic acid etermination of oxalic acid by ltraviolet absorption spectrophotometry
- PN P04990-1989 Methods of chemical tests Knitted medical articles Determination of ultraviolet radiation absorbance
- PN Z04171-02-1986 Air purity protection ests for picric acid etermination of picric acid n work places by UV pectrophotometry absorption
- PN-EN ISO 16474-3-2021-06 E Paints and varnishes -- Methods of exposure to laboratory light sources -- Part 3: Fluorescent UV lamps (ISO 16474-3:2021)
IT-UNI, UV light test
KR-KS, UV light test
- KS M ISO 4892-3-2017 Plastics－Methods of exposure to laboratory light sources－Part 3：Fluorescent UV lamps
- KS L ISO 10677-2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Ultraviolet light source for testing semiconducting photocatalytic materials
Professional Standard - Geology, UV light test
- DZ/T 0064.59-1993 Groundwater Quality Examination Method Determination of Nitrate by Ultraviolet Spectrophotometry
German Institute for Standardization, UV light test
- DIN EN ISO 4892-3:2016-10 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016); German version EN ISO 4892-3:2016
- DIN EN 14187-8:2017-07 Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation; German version EN 14187-8:2017
- DIN EN ISO 16474-3:2021-04 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2021); German version EN ISO 16474-3:2021
- DIN EN 13523-10:2017 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German version EN 13523-10:2017
- DIN EN 13523-10:2010 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German version EN 13523-10:2010
- DIN EN 14255-4:2007 Measurement and assessment of personal exposures to incoherent optical radiation - Part 4: Terminology and quantities used in UV-, visible and IR-exposure measurements; English version of DIN EN 14255-4:2007-02
- DIN EN 50289-4-17:2011 Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable; German version EN 50289-4-17:2011
- DIN EN 14255-1:2005 Measurement and assessment of personal exposures to incoherent optical radiation - Part 1: Ultraviolet radiation emitted by artificial sources in the workplace; German version EN 14255-1:2005
- DIN 6868-56:1997 Image quality assurance in X-ray diagnosis - Part 56: Acceptance testing for hard copy cameras
- DIN V 6868-12:1996 Image quality assurance in X-ray diagnostics - Part 12: Constancy tests for hard copy cameras
- DIN EN ISO 11985:1998 Opthalmic optics - Contact lenses - Ageing by exposure to UV and visible radiation (in vitro method) (ISO 11985:1997); German version EN ISO 11985:1997
- DIN EN 13523-10:2023-08 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German and English version prEN 13523-10:2023 / Note: Date of issue 2023-07-14*Intended as replacement for DIN EN 13523-10 (2017-05).
- DIN EN 13523-10:2017-05 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German version EN 13523-10:2017
- DIN 6868-11:1998 Image quality assurance in X-ray diagnostics - Part 11: Constancy testing of the imaging system and camera in X-ray cinematography
- DIN EN ISO 24442:2012 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection (ISO 24442:2011); German version EN ISO 24442:2011
- DIN 58141-10:1997 Testing of fibre optic elements - Part 10: Determination of illuminance and acceptance angle of cold light sources
CENELEC - European Committee for Electrotechnical Standardization, UV light test
- EN 61228:1994 Method of Measuring and Specifying the UV-Radiation of Ultraviolet Lamps Used for Sun-Tanning (Incorporates Amendment A1: 1996)
- EN 50289-4-17:2011 Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
Society of Automotive Engineers (SAE), UV light test
Professional Standard - Agriculture, UV light test
- NY/T 1860.5-2016 Guidelines on the determination of physico-chemical properties of pesticides.Part 5:Ultraviolet / visibility absorption
- NY/T 1860.5-2010 Guidance on the determination of physico-chemical properties of pesticides.Part 5:Ultraviolet/Visibility absorption
Professional Standard - Textile, UV light test
- FZ/T 50047-2019 Test method for heat resistance, ultraviolet radiation resistance and acid resistance of polyimide fiber
Professional Standard - Public Safety Standards, UV light test
- GA/T 1447-2017 Technical Specifications for Ultraviolet Photoluminescence Inspection of Documents Altered by Forensic Science
ES-UNE, UV light test
- UNE-EN ISO 4892-3:2016 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016)
- UNE-EN ISO 16474-3:2022 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2021)
- UNE-EN 50289-4-17:2016 Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
- UNE-EN 13523-10:2017 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
Association Francaise de Normalisation, UV light test
- NF ISO 10677:2011 Céramiques techniques - Sources lumineuses UV destinée aux essais des matériaux photocatalytiques semi-conducteurs
- NF T75-613*NF EN ISO 24442:2012 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection.
- NF T37-001-10:2010 Coil coated metals - Test methods - Part 10 : resistance to fluorescent UV radiation and water condensation.
- NF T51-195-3:2013 Plastics - Methods of exposure to laboratory light sources - Part 3: fluorescent UV lamps
- NF T51-195-3*NF EN ISO 4892-3:2016 Plastics - Methods of exposure to laboratory light sources - Part 3 : fluorescent UV lamps
- NF EN ISO 4892-3:2016 Plastiques - Méthodes d'exposition à des sources lumineuses de laboratoire - Partie 3 : lampes fluorescentes UV
- NF X90-008-4*NF EN 14255-4:2006 Measurement and assessment of personal exposures to incoherent optical radiation - Part 4 : terminology and quantities used in UV-, visible and IR-exposure measurements
- NF T37-001-10*NF EN 13523-10:2017 Coil coated metals - Test methods - Part 10 : resistance to fluorescent UV radiation and water condensation
- NF T30-089-3:2014 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3 : fluorescent UV lamps
- NF T30-089-3:2021 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3 : fluorescent UV lamps
- NF EN ISO 16474-3:2021 Peintures et vernis - Méthodes d'exposition à des sources lumineuses de laboratoire - Partie 3 : lampes fluorescentes UV
- NF C93-537-4-17*NF EN 50289-4-17:2016 Communication cables - Specifications for test methods - Part 4-17 : test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
- NF EN 50289-4-17:2016 Câbles de communication - Spécifications des méthodes d'essai - Partie 4-17 : méthodes d'essai pour évaluer la résistance aux UV des gaines des câbles électriques et des câbles à fibre optique
- NF C93-537-4-17:2011 Communication cables - Specifications for test methods - Part 4-17 : test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable.
- NF C73-827/A1:2010 Household and similar electrical appliances - Safety - Part 2-27 : particular requirements for appliances for skin exposure to ultraviolet and infrared radiation.
- NF A09-599:1988 Non destructive testing. Surface control methods (penetrant testing, magnetic particle testing.). Characterization of ultraviolet light sources.
- NF X90-008-1*NF EN 14255-1:2005 Measurement and assessment of personal exposures to incoherent optical radiation - Part 1: ultraviolet radiation emitted by artificial sources in the workplace.
- NF B44-103*NF ISO 10677:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) - Ultraviolet light source for testing semiconducting photocatalytic materials
- NF EN 13523-10:2017 Tôles prélaquées - Méthodes d'essai - Partie 10 : résistance à un rayonnement UV fluorescent et à la condensation de l'eau
- NF EN 3475-706:2006 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 706 : marquabilité laser UV
International Organization for Standardization (ISO), UV light test
- ISO 24442:2011 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection
- ISO/CD 4892-3:1975 Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
- ISO/DIS 4892-3:2023 Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
- ISO 16474-3:2013 Paints and varnishes.Methods of exposure to laboratory light sources.Part 3: Fluorescent UV lamps
- ISO 16474-3:2021 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
- ISO 21820:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Ultraviolet photoluminescence image test method for analysing polytypes of boron- and nitrogen-doped SiC crystals
ZA-SANS, UV light test
- SANS 105-B02:1994 Textiles - Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
Aerospace, Security and Defence Industries Association of Europe (ASD), UV light test
- ASD-STAN PREN 4057-307-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 307: Resistance to Ultra Violet Radiation (Edition P 1)
CN-QIYE, UV light test
- Q/GDW 1978-2013 Ultraviolet imaging detection method for electric fittings corona test
CO-ICONTEC, UV light test
ES-AENOR, UV light test
Professional Standard - Press and Publication, UV light test
- CY/T 227-2020 Requirements and inspection methods for UV-curable inks in flexographic printing
- CY/T 219-2020 Process control requirements and inspection methods for UV-cured offset printing of printed matter on paper
BELST, UV light test
- STB 8058-2017 System for ensuring uniformity of measurements of the Republic of Belarus. Ultraviolet-visible-nearinfrared spectrophotometers. Methods of verification
IN-BIS, UV light test
Professional Standard - Forestry, UV light test
- LY/T 1153-1994 Test method of light germination device for forest seeds
Professional Standard - Machinery, UV light test
- JB/T 9358-1999 Test method for fixed wavelength (254nm) UV detector used in liquid chromatography
GM Daewoo, UV light test
(U.S.) Telecommunications Industries Association , UV light test
AT-ON, UV light test
- OENORM EN ISO 16474-3:2021 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2021)
CH-SNV, UV light test
- SN EN ISO 16474-3:2021 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2021)
GM North America, UV light test
- GM GMP.PP.093-2002 Polypropylene 30 % Glass Fiber Reinforced, UV Stabilized, Copolymer ISO Tests
- GM GMP.PP.085-2003 Polypropylene (PP), 13% Glass Fiber Reinforced, UV Stabilized, Homopolymer, ISO Tests
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, UV light test
- GB/T 33720-2017 Accelerated test method of luminous flux depreciation for LED lighting products