ZH
RU
ES

low level laboratory

low level laboratory, Total:496 items.

In the international standard classification, low level laboratory involves: Test conditions and procedures in general, Electrical and electronic testing, Environmental testing, Linear and angular measurements, Tyres, Pipeline components and pipelines, Analytical chemistry, Soil quality. Pedology, Ceramics, Electrical engineering in general, Aircraft and space vehicles in general, Construction materials, Paints and varnishes, Road engineering, Ventilators. Fans. Air-conditioners, Noise with respect to human beings, Rubber, Air quality, Testing of metals, Electrical accessories, Equipment for entertainment, Optical equipment, Machine tools, Products of the textile industry, Pulps, Non-destructive testing, Explosion protection, Thermodynamics and temperature measurements, Earthworks. Excavations. Foundation construction. Underground works, Corrosion of metals, Quality, Internal combustion engines for road vehicles, Lubricants, industrial oils and related products, Aerospace engines and propulsion systems, Protection against fire, Sports equipment and facilities, Rubber and plastics products, Fuels, Petroleum products in general, Glass, Optics and optical measurements, Equipment for petroleum and natural gas industries, Elements of buildings, Materials for aerospace construction, Fibre optic communications, Fluid storage devices, Mechanical testing, Measurement of volume, mass, density, viscosity, Wastes, Natural gas, Refractories, Textile fibres, Footwear, Medical sciences and health care facilities in general, Road vehicle systems, Laboratory medicine, Welding, brazing and soldering, Kitchen equipment, Plastics, Electricity. Magnetism. Electrical and magnetic measurements, TESTING, Metalliferous minerals, Shipbuilding and marine structures in general, Geology. Meteorology. Hydrology, On-board equipment and instruments, Information sciences. Publishing.

Professional Standard - Aviation, low level laboratory

HB 6783.2-1993 Military airborne equipment climate environment test chamber (room) verification method Low pressure (altitude) test chamber (room)
HB 6783.13-1993 Military airborne equipment climate environment test box (room) verification method temperature-humidity-altitude test box (room)
HB 6783.4-1993 Military Airborne Equipment Climatic Environment Test Chamber (Chamber) Verification Method Temperature-Altitude Test Chamber (Chamber)
HB 6744-1993 Test method for low temperature flexure of room temperature vulcanizing sealants
HB 7122.3-1994 Civil aircraft airborne equipment climate environment test chamber (room) verification method temperature and humidity test chamber (room)
HB 7122.2-1994 Civil Aircraft Airborne Equipment Climatic Environment Test Chamber (Chamber) Verification Method Temperature and Altitude Test Chamber (Chamber)
HB 5274-1993 Test method for low temperature flexibility of room temperature vulcanizing sealants
HB 6783.3-1993 Military airborne equipment climate environment test chamber (room) verification method temperature test chamber (room)
HB 5321-1993 Test method for low temperature strength of anaerobic adhesives for aviation
HB 5250-1993 Test method for shear strength of room temperature vulcanizing sealants
HB 5237-1983 Determination of low temperature properties of vulcanized rubber - Test method for retraction temperature (TR test)
HB 5249-1993 Test method for 180° peel strength of room temperature vulcanizing sealants
HB 5241-1993 Test method for activity period of room temperature vulcanizing sealant (consistency method)
HB 5248-1993 Test method for "T" peel strength of room temperature vulcanizing sealants
HB 5830.14-1996 Airborne Equipment Environmental Conditions and Test Methods Low Air Pressure (Altitude)
HB 7485-1997 Combustion chamber performance test

未注明发布机构, low level laboratory

GJB 150.2A-2009 Military equipment laboratory environmental test methods Part 2: Low pressure (altitude) test
GJB 150.4A-2009 Military equipment laboratory environmental test methods Part 4: Low temperature test
BS 593:1989(2007) Specification for Laboratory thermometers
BS EN ISO 7371:1996(1999) Household refrigerating appliances — Refrigerators with or without low temperature compartment — Characteristicsandtest methods

Group Standards of the People's Republic of China, low level laboratory

T/CSCP 0035.14-2017 Laboratory corrosion tests on low alloy structural steels - Part 14: Laboratory corrosion fatigue test methods on low alloy steels
T/CSCP 0035.8-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 8: Full Immersion Test Method for Laboratory Uniform Corrosion of Low Alloy Structural Steels
T/CSCP 0035.7-2017 Laboratory corrosion tests on low alloy structural steels - Part 7: General procedures for laboratory microbial corrosion tests on low alloy structural steels
T/CSCP 0035.9-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 9: Pitting Corrosion Test Methods on Low Alloy Structural Steels
T/CSCP 0035.15-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 15: Electrochemical Test Methods for Corrosion of Low Alloy Structural Steels
T/CSCP 0035.1-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 1: General Principles of Test Methods
T/CSCP 0035.11-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 11: Test Methods for Intergranular Corrosion of Low Alloy Structural Steels
T/CSCP 0035.13-2017 Laboratory Corrosion Testing of Low Alloy Structural Steels Part 13: Stress Corrosion Test Methods for Low Alloy Structural Steels
T/CSCP 0035.12-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 12: Test Methods for Galvanic Corrosion of Low Alloy Structural Steels
T/CSCP 0035.10-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 10: Test Methods for Crevice Corrosion of Low Alloy Structural Steels
T/SJZSYYQXH JZ008-2023 Calibration method of low temperature temperature tester
T/SZUAVIA 009.4-2019 Laboratory environmental test methods for unmanned aircraft systems with multi-rotors Part 4: Low temperature test
T/FSI 053-2020 Low Viscosity RTV Methyl Silicone Rubber
T/CSCP 0035.16-2017 Laboratory corrosion tests on low-alloy structural steels-Part 16: Electrochemical test methods for micro-corrosion of low-alloy structural steels
T/CSCP 0035.6-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 6: General Procedures for Salt Spray Corrosion Tests on Low Alloy Structural Steels
T/SZUAVIA 009.3-2019 Laboratory environmental test methods for unmanned aircraft systems with multi-rotors Part 3: Low pressure test
T/CSCP 0035.4-2017 Laboratory corrosion tests on low alloy structural steels - Part 4: General procedures for soil corrosion simulation tests on low alloy structural steels
T/CSCP 0035.2-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 2: General Practice for Corrosion Tests on Low Alloy Structural Steels in Simulated Atmosphere
T/CSCP 0035.3-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 3: General Procedures for Corrosion Tests of Low Alloy Structural Steels in Simulated Seawater
T/CSCP 0035.5-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 5: General Procedures for Simulated Alternating Wet and Dry Corrosion Tests on Low Alloy Structural Steels
T/CSCP 0035.17-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 17: Analytical Methods for Corrosion Products of Low Alloy Structural Steels
T/CSCP 0035.18-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 18: Methods for Removal of Corrosion Products on Low Alloy Structural Steels
T/CSCP 0035.19-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 19: Corrosion Microscopic Morphological Observation Methods of Low Alloy Structural Steels
T/SZUAVIA 009.7-2019 Laboratory environmental test methods for unmanned aircraft systems with multi-rotors Part 7: Temperature variation test
T/QGCML 2029-2023

Military Standard of the People's Republic of China-General Armament Department, low level laboratory

GJB 6756-2009 Test rules for low density wind tunnel
GJB 150.24A-2009 Laboratory environmental test methods for military materiel.Part 24:Temperature-humidity-vibration-altitude test
GJB 150.2-1986 Environmental test methods for military equipment Low pressure (altitude) test
GJB 8671.13-2015 Test methods for metal cartridges Part 13: Low temperature strength test
GJB 150.15A-2009 Laboratory environmental test methods for military materiel.Part 15:Acceleration test
GJB 150.5A-2009 Laboratory environmental test methods for military materiel.Part 5:Temperature shock test
GJB 6612-2008 Test method for aerodynamic force measurements in hypersonic low density wind tunnel
GJB 1709-1993 Test method for low temperature tensile shear strength of adhesives
GJB 150.25A-2009 Laboratory environmental test methods for military materiel.Part 25:Vibro-acoustic/temperature test
GJB 2986A-2020 Design criteria for hypersonic low-density wind tunnel test model
GJB 165.5-1986 Fuze laboratory test Fuze rotation test
GJB 2725-1996 General requirements for calibration laboratories and testing laboratories
GJB 2725A-2001 General requirements for testing laboratories and calibration laboratories
GJB 59.37-1991 Armored vehicle test procedures Crew compartment heating performance test
GJB 448-1988 Adhesive low temperature 90° peel strength test method (metal to metal)

Military Standards (MIL-STD), low level laboratory

DOD A-A-53237-1987 BATH, WATER, DENTAL IMPRESSION MATERIAL, LOW TEMPERATURE
DOD A-A-54740-1992 CRUCIBLE, FILTERING, LABORATORY (GOOCH, LOW FORM)
DOD A-A-50807-1981 CYLINDER, GRADUATED, LABORATORY, GLASS
DOD A-A-51344 B-1992 GRADUATE, LIQUID, LABORATORY
DOD A-A-51000-1985 RACK, TEST TUBE, LABORATORY
DOD A-A-53950-1989 RACK, TEST TUBE, LABORATORY
DOD A-A-50999-1985 CYLINDER, GRADUATED, LABORATORY, POLYPROPYLENE
DOD A-A-51059-1985 GRADUATE, LIQUID, LABORATORY, (CORROSION RESISTING)

RO-ASRO, low level laboratory

STAS 8375/2-1969
SR ISO 146-2:1996 Metallic materials. Verification of Vickers hardness testing machines. Part 2: Less than HV 0,2
STAS 8375/1-1969

Professional Standard - Chemical Industry, low level laboratory

HG 5-1340-1980 Low viscosity phenolic resin viscosity test method

Korean Agency for Technology and Standards (KATS), low level laboratory

KS A IEC 60605-3-6-2002(2017) Equipment reliability testing－Part 3：Preferred test conditions－Section 6：Test cycle 6：Outdoor transportable equipment－Low degree of simulation
KS A IEC 60605-3-6-2002(2022) Equipment reliability testing－Part 3：Preferred test conditions－Section 6：Test cycle 6：Outdoor transportable equipment－Low degree of simulation
KS I 2008-2013 Test method for bacterial reduction rate of building material ― Large chamber method
KS D 0294-2009 Standard method for the evaluation of repassivation rate of stainless steel components using laboratory scratch test
KS C IEC 60068-2-39:2018 Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
KS D ISO 10062:2003 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
KS D ISO 10062:2014 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
KS K ISO 105-B03:2011 Textiles－Tests for colour fastness－Part B03：Colour fastness to weathering：Outdoor exposure
KS M 2450-2007(2022) Test method for low－temperature viscosity of automotive fluid lubricants measured by brookfield viscometer
KS A ISO/IEC GUIDE 43-2:2002 Proficiency testing by interlaboratory comparisons-Part 2:Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-2:2013 Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS C IEC 60068-2-39:2002 Environmental testing－Part 2：Tests－Test Z/AMD：Combined sequential cold, low air pressure and damp heat test
KS A IEC 60605-3-1:2002 Equipment reliability testing－Part 3：Preferred test conditions－Indoor portable equipment－Law degree of simulation
KS C IEC 60068-3-2-2003(2013)
KS K ISO 105-E16:2018 Textiles－Tests for colour fastness－Part E16：Colour fastness to water spotting on upholstery fabrics
KS A IEC 60605-3-1-2002(2017) Equipment reliability testing－Part 3：Preferred test conditions－Indoor portable equipment－Law degree of simulation
KS F 2494-2017 Standard test method of the laboratory permeability test for
KS F 2494-2017(2022) Standard test method of the laboratory permeability test for
KS E ISO 10277:2003 Aluminium ores－Experimental methods for checking the precision of sampling
KS V 0824-2011(2021) Temperature environmental test procedure for compressors and pumps under cryogenic condition
KS L ISO 4788:2006 Laboratory glassware-Graduated measuring cylinders
KS L ISO 4788-2016(2021) Laboratory glassware－Graduated measuring cylinders
KS L ISO 4788:2016 Laboratory glassware－Graduated measuring cylinders
KS B ISO 14271:2004 Vickers hardness testing of resistance spot, projection and seam welds(low load and microhardness)
KS M ISO 28702:2009 Rubber and plastics hoses and tubing-Textile-reinforced types-Sub-ambient temperature crush test
KS C IEC 60068-2-13:2014 Environmental testing — Part 2-13: Tests — Test M: Low air pressure

IN-BIS, low level laboratory

AENOR, low level laboratory

UNE 22339:1996 COAL DUST EXPLOSIVITY. TEST METHOD FOR DETERMINING THE MINIMUM EXPLOSIVE CONCENTRATION IN THE 20 l SPHERICAL CHAMBER.

NO-SN, low level laboratory

NS 8011-1982 Geotechnical testing - Laboratory methods - Density
NS 8015-1988 Geotechnical testing - Laboratory methods - Determination of undrained shear strength by fall-cone testing
NS 8012-1982 Geotechnical testing - Laboratory methods - Density of solid particles
NS 8016-1988 Geotechnical testing - Laboratory methods - Determination of undrained shear strength by unconfined pressure testing

American Society for Testing and Materials (ASTM), low level laboratory

ASTM D5744-12 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D969-85(2003)e1 Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM D969-85(1998) Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM D96-73(1984) Laboratory test method for degree of bleeding of road marking paint
ASTM D96-88(1998) Laboratory test method for degree of bleeding of road marking paint
ASTM D5744-13 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D5744-13e1 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM F3351-19 Standard Test Method for Playground Surface Impact Testing in Laboratory at Specified Test Height
ASTM F3351-19e1 Standard Test Method for Playground Surface Impact Testing in Laboratory at Specified Test Height
ASTM E1491-97(2002) Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
ASTM E1491-97 Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
ASTM D4016-08 Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)
ASTM D6103/D6103M-17 Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM)
ASTM E1491-06(2019) Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
ASTM E1491-06(2012) Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
ASTM D2983-04a Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D2983-04 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D4575-99 Standard Test Methods for Rubber Deterioration8212;Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM D868-85(1998) Standard Test Method for Evaluating Degree of Bleeding of Traffic Paint
ASTM D969-85(2003) Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM C943-17 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
ASTM C943-10 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
ASTM D4016-93 Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)
ASTM D5133-01 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5744-07e1 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D5025-99 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
ASTM E1491-06 Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
ASTM D4832-10 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
ASTM E691-99 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E949-88(1996) Standard Test Method for Total Moisture in a Refuse-Derived Fuel Laboratory Sample
ASTM E949-88(2004) Standard Test Method for Total Moisture in a Refuse-Derived Fuel Laboratory Sample
ASTM D7778-15(2022)e1 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-08 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-11 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D4575-99(2005) Standard Test Methods for Rubber Deterioration8212;Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM D4575-09(2015) Standard Test Methods for Rubber Deterioration&x2014;Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM D4575-09 Standard Test Methods for Rubber Deterioration8212;Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM D7539-10 Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints
ASTM C1161-13 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM D2983-09 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D2983-15 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D4832-16 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
ASTM E1515-03 Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
ASTM E1515-14 Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
ASTM C1684-13 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperaturemdash;Cylindrical Rod Strength
ASTM C1684-13e1 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperaturemdash;Cylindrical Rod Strength
ASTM D5188-04 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
ASTM D5188-04a Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
ASTM D4832-95e1 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
ASTM D4832-16e1 Standard test method for preparation and testing of controlled low strength material (CLSM) test cylinders
ASTM E691-21 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D7263-09(2018)e2 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM D7263-09(2018) Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM E691-22 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D7263-09(2018)e1 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM D5744-18 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D7778-12 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D3429-93(2002)e1 Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
ASTM D3429-93(2007) Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
ASTM D3429-93(2012) Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
ASTM D5607-02(2006) Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
ASTM D5607-16 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
ASTM D5133-05 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM E1301-95e1 Standard Guide for Proficiency Testing by Interlaboratory Comparisons
ASTM E1301-95(2003) Standard Guide for Proficiency Testing by Interlaboratory Comparisons
ASTM C1499-09 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1273-18 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
ASTM C1499-09(2013) Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM E2653-09 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories
ASTM D7300-06 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
ASTM C942-10 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM D7263-09 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM C942/C942M-21 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM C802-14(2022) Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM E1515-00 Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
ASTM D6855-03 Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode
ASTM E1995-04 Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
ASTM E1995-04a Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
ASTM D5744-96(2001) Standard Test Method for Accelerated Weathering of Solid Materials Using a Modified Humidity Cell
ASTM D5133-13 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D2532-16 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
ASTM D2532-17 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
ASTM D3709-89(1999) Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions

Japanese Industrial Standards Committee (JISC), low level laboratory

JIS C 60068-2-39:2019 Environmental testing -- Part 2-39: Tests -- Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
JIS B 6207:1987 Test code for performance and accuracy of planing machines (double housing type)
JIS Q 0043-2:1998 Proficiency testing by interlaboratory comparisons -- Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
JIS C 60068-2-40:1995 Environmental testing Part 2: Tests, Test Z/AM: Combined cold/low air pressure tests
JIS C 0030:1995 Environmental testing Part 2: Tests, Test Z/AM: Combined cold/low air pressure tests
JIS K 6330-4:2003 Testing methods for rubber and plastics hoses -- Part 4: Sub-ambient temperature flexibility tests
JIS Z 8818:2002 Test method for minimum explosible concentration of combustible dusts
JIS C 60068-2-39:2004 Environmental testing -- Part 2: Tests. Test Z/AMD: Combined sequential cold, low air pressure, and damp heat test
JIS Z 2343-6:2012 Non-destructive testing -- Penetrant testing -- Part 6: Penetrant testing at temperatures lower than 10 degree C
JIS R 2206 AMD 1:2005 Testing method for cold crushing strength of refractory bricks (Amendment 1)
JIS C 60068-2-1:2010 Environmental testing -- Part 2-1: Tests -- Test A: Cold
JIS A 1141:2001 Method of test for particles less than density of 1.95 g/cm*3 in aggregate
JIS A 1141:2007 Method of test for particles less than density of 1.95 g/cm*3 in aggregate
JIS C 60068-2-1:1995 Environmental testing procedures Part 2: Tests, Tests A: Cold

IT-UNI, low level laboratory

Society of Automotive Engineers (SAE), low level laboratory

SAE J1561-2001 Laboratory Speed Test Procedure for Passenger Car Tires
SAE J1633-2000 Laboratory Speed Test Procedure for Light Truck Tires
SAE J1633-2019 Laboratory Speed Test Procedure for Light Truck Tires
SAE AIR5026-1996 Test Cell Instrumentation
SAE AIR5026A-2011 Test Cell Instrumentation
SAE J1633-1995 Laboratory Speed Test Procedure for Light Truck Tires
SAE J1330-2000 Photometry Laboratory Accuracy Guidelines
SAE J1677-2022 Tests and Procedures for Carbon Steel and High Strength, Low Alloy Steel Tubing
SAE J977A-1968 INSTRUMENTATION FOR LABORATORY IMPACT TESTS
SAE USCAR7-2012 Deembrittlement verification test
SAE J1400-1989 LABORATORY MEASUREMENT OF THE AIRBORNE NOISE REDUCTION OF ACOUSTICAL MATERIALS

SAE - SAE International, low level laboratory

SAE J1561-2019 Laboratory Speed Test Procedure for Passenger Car Tires
SAE J1561-1988 Laboratory Speed Test Procedure for Passenger Car Tires
SAE J1561-1993 Laboratory Speed Test Procedure for Passenger Car Tires@ Recommended Practice (February 1993)
SAE J1330-1982 Photometry Laboratory Accuracy Guidelines
SAE J1330-2014 Photometry Laboratory Accuracy Guidelines
SAE J977-1966 INSTRUMENTATION FOR LABATORY IMPACT TESTS
SAE J1400-2017 LABORATORY MEASUREMENT OF THE AIRBORNE NOISE REDUCTION OF ACOUSTICAL MATERIALS
SAE J1400-1982 Laboratory Measurement of the Airborne Noise Reduction of Acoustical Materials

European Committee for Standardization (CEN), low level laboratory

EN ISO 4672:1999 Rubber and Plastics Hoses - Sub-Ambient Temperature Flexibility Tests
EN 915:2008 Gymnastic equipment - Asymmetric bars - Requirements and test methods including safety
EN 24672:1993 Rubber and plastics hoses; sub-ambiant temperature flexibility tests (ISO 4672:1988)
EN ISO 105-B03:2017 Textiles - Tests for Colour Fastness - Part B03: Colour Fastness to Weathering: Outdoor Exposure
EN ISO 10062:1995 Corrosion Tests in Artificial Atmosphere at Very Low Concentrations of Polluting Gas(es) (ISO 10062 : 1991)
EN ISO 10062:2022 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2022)
EN ISO 10062:2008 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2006)
EN 13641:2002 Elimination or reduction of risk of infection related to in vitro diagnostic reagents
EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
prEN ISO 5659-2 rev Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test
EN ISO 3452-6:2008 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 degrees C (ISO 3452-6:2008)

American National Standards Institute （ANSI), low level laboratory

ANSI/ASTM D5025:1999 Specification for a Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials (08.03)
ANSI/AMCA 301-2006 Methods for Calculating Fan Sound Ratings from Laboratory Test Data
ANSI/EIA 364-105-A:2008 Altitude - Low Temperature Test Procedure for Electrical Connectors
ANSI/ASTM E994:1996 Guide for Calibration and Testing Laboratory Accreditation Systems General Requirements for Operation and Recognition
ANSI/EIA 455-98:1983 External Fiber Optic Cable External Freezing Test
ANSI/ASTM E691:2013 PRACTICE FOR CONDUCTING AN INTERLABORATORY STUDY TO DETERMINE THE PRECISION OF A TEST METHOD
ANSI/ASTM E2653a:2009 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer than Six Participating Laboratories

KR-KS, low level laboratory

KS C IEC 60068-2-39-2018(2023) Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
KS C IEC 60068-2-39-2018 Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
KS K ISO 105-E16-2018 Textiles－Tests for colour fastness－Part E16：Colour fastness to water spotting on upholstery fabrics
KS K ISO 105-E16-2018(2023) Textiles－Tests for colour fastness－Part E16：Colour fastness to water spotting on upholstery fabrics
KS L ISO 4788-2016 Laboratory glassware－Graduated measuring cylinders

RU-GOST R, low level laboratory

GOST 22733-2002 Soils. Laboratory method for determination of maximum density
GOST 8682-1993 Laboratory glassware. Interchangeable conical ground V-joints
GOST R ISO 16000-23-2012 Indoor air. Part 23. Performance test for evaluating the reduction of formaldehyde concentrations by sorptive building materials
GOST 9454-1978 Metals. Method for testing the impact strength at low, room and high temperature
GOST 33696-2015 Drilling fluids. Laboratory testing
GOST 30416-1996 Soils. Laboratory testing. General
GOST R 57802-2017 Ceramic composites. Test method for determination of transthickness tensile strength at ambient temperature
GOST 9289-1978 Footwear. Acceptance rules
GOST R 53022.3-2008 Clinical laboratory technologies. Requirements of quality of clinical laboratory tests. Part 3. Assessment of laboratory tests clinical significance
GOST R 53022.2-2008 Clinical laboratory technologies. Requirements for quility of clinical laboratory tests. Part 2. Assessment of methods analytical reliability (accuracy, censitivity, specificity)
GOST 25051.2-1982 The state system of testing products. Test chambers of heat and cold. Certification methods
GOST 28622-1990 Soils. Laboratory method for determining of froth-heave degree

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, low level laboratory

GB/T 16534-2009 Fine ceramics(advanced ceramics,advanced technical ceramics).Test method for hardness of monolithic ceramics at room temperature
GB/T 23805-2009 Fine ceramics(advanced ceramics,advanced technical ceramics).Test method for tensile strength of monolithic ceramics at room temperature
GB/T 8429-1998 Textiles--Tests for colour fastness--Colour fastness to weathering: Out door exposure
GB/T 2424.24-1995 Basic environmental testing procedures for electric and electronic products. Guidance for combined temperature (cold and heat)/low air pressure/vibration(sinusoidal)test
GB/T 2423.102-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test:combined temperature(cold and heat)/low air pressure/vibration(sinusoidal)
GB/T 2424.15-2008 Enviromental testing for electric and electronic products.Guide for combined temperature/low air pressure tests
GB/T 19745-2005 Corrosion tests in artificial atmosphere at very low Concentrations of polluting gas(es)
GB/T 2423.59-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test Z/ABMFh:Combined temperature(cold and heat)/low air pressure/vibration(random)
GB/T 6579-2007 Laborator glassware.Thermal shock and thermal shock endurance test methods
GB/T 9467-1988 Photometry of indoor type luminaires
GB/T 18443.2-2001 Testing method of cryo-insulation pressure vessels vacuum measurement
GB/T 9868-1988 Rubber--General directions for achieving elevated or subnormal temperatures for test purposes
GB/T 12085.23-2022 Optics and photonics—Environmental test methods—Part 23：Low pressure combined with cold,ambient temperature and dry or damp heat
GB/T 2424.15-1992 Basic environmental testing procedures for electric and electronic products--Guide for combined temperature/low air pressure tests
GB/T 21785-2008 Laboratory glassware.Pyknometers
GB/T 10590-1989 Specification for low temperature/low air pressure test chambers
GB/T 2423.25-2008 Environmental testing for electric and electronic products.Part2:Tsets Tset Z/AM:Combined cold/low air pressure tests
GB/T 10589-2008(英文版) Specifications for low temperature test chambers
GB/T 7758-1987 Rubber, vulcanized--Determination of low temperature characteristics--Temperature-retraction procedure(TR test)
GB/T 7758-2002 Rubber,vulcanized--Determination of low-temperature characteristics--Temperature-retraction procedure (TR test)
GB/T 2423.25-1992 Basic environmental testing procedures for electric and electronic products--Test Z/AM: combined cold/low air pressure tests
GB/T 5170.10-2017 Inspection methods for environmental testing equipments.Part 10:Combined high and low temperature/low air pressure testing equipments

Professional Standard - Aerospace, low level laboratory

QJ 2675.1-1994 Low temperature container performance test method interlayer vacuum test
QJ 1177.18-1987 Environmental test methods for ground-to-air and ship-to-air missile weapon systems Temperature humidity vibration low pressure test
QJ 1177.17-1987 Environmental test methods for ground-to-air and ship-to-air missile weapon systems Temperature and low pressure tests
QJ 1086-1986 Cryogenic temperature measurement specification for liquid rocket engine test
QJ 2755-1995 Test method for compressive properties of porous low-density composites
QJ 1323.7-1987 Electromagnetic relay test method low temperature test

German Institute for Standardization, low level laboratory

DIN IEC 60605-3-1:1988 Electrical engineering; equipment reliability testing; preferred test conditions; indoor portable equipment; low degree of simulation; identical with IEC 60605-3-1:1986
DIN ISO 9022-5:1999 Optics and optical instruments - Environmental test methods - Part 5: Combined cold, low air pressure (ISO 9022-5:1994)
DIN ISO 718:1993 Laboratory glassware; thermal shock and thermal shock endurance; test methods; identical with ISO 718:1990
DIN 12785:1977 Laboratory glassware; special purpose laboratory thermometers
DIN 18125-1:1997 Soil, investigation and testing - Determination of density of soil - Part 1: Laboratory tests
DIN 12775:1975 Laboratory glassware; laboratory thermometers, scale values 0,1 °C, 0,2 °C and 0,5 °C
DIN 12778:2019-12 Laboratory glassware - Laboratory thermometers, scale values 1 °C and 2 °C
DIN EN 60068-2-40:2000 Environmental testing - Part 2: Tests; test Z/AM: Combined cold/low air pressure tests (IEC 60068-2-40:1976 + A1:1983); German version EN 60068-2-40:1999
DIN 12779:1978-10 Laboratory glassware; laboratory thermometers, quickly indicating (distillation thermometers)
DIN 12779:1978 Laboratory glassware; laboratory thermometers, quickly indicating (distillation thermometers)
DIN EN ISO 3452-6:2009 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 °C (ISO 3452-6:2008); English version of DIN EN ISO 3452-6:2009-04
DIN 12778:1975 Laboratory glassware; laboratory thermometers, smallest scale division 1 °C and 2 °C
DIN EN 915:2009 Gymnastic equipment - Asymmetric bars - Requirements and test methods including safety; English version of DIN EN 915:2009-01
DIN 18125-1:2010 Soil, investigation and testing - Determination of density of soil - Part 1: Laboratory tests
DIN 12781:1978 Laboratory glassware; straight enclosed scale laboratory thermometers for partial immersion
DIN 12775:2019-12 Laboratory glassware - Laboratory thermometers, scale values 0,1 °C, 0,2 °C and 0,5 °C
DIN ISO 9022-21:2001 Optics and optical instruments - Environmental test methods - Part 21: Combined low pressure and ambient temperature or dry heat (ISO 9022-21:1998)
DIN EN 60068-3-2:2000 Environmental testing - Part 3: Background information; section 2: Combined temperature/low air pressure tests (IEC 60068-3-2:1976); German version EN 60068-3-2:1999
DIN IEC 60605-3-4:1993 Equipment reliability testing; preferred test conditions; equipment for portable and non-stationary use; low degree of simulation; identical with IEC 60605-3-4:1992
DIN 12785 Bb.1:1978 Laboratory glassware; special purpose laboratory thermometers, additional remarks
DIN EN 932-2:1999 Test for general properties of aggregates - Part 2: Methods for reducing laboratory samples; German version EN 932-2:1999
DIN EN 60068-2-39:2000 Environmental testing - Part 2: Tests; test Z/AMD: Combined sequential cold, low air pressure and damp heat test (IEC 60068-2-39:1976); German version EN 60068-2-39:1999
DIN EN ISO 10062:2008 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2006); English version of DIN EN ISO 10062:2008-04
DIN ISO/TS 17892-4:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (ISO/TS 17892-4:2004); German version CEN ISO/TS 17892-4:2004
DIN 50106:2023-02 Testing of metallic materials - Compression test at room temperature
DIN ISO/TS 17892-2:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of density of fine grained soil (ISO/TS 17892-2:2004); German version CEN ISO/TS 17892-2:2004
DIN EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests (IEC 60068-2-39:2015); German version EN 60068-2-39:2016
DIN V 40046-37:2006 Environmental testing - Part 37: Tests - Test Ky: Hydrogen sulphide low concentration for contacts and connections
DIN 12791-3:1983-06 Laboratory glassware; density hydrometers; use and test methods
DIN EN 60068-2-13:2000 Environmental testing - Part 2: Tests; test M: Low air pressure (IEC 60068-2-13:1983); German version EN 60068-2-13:1999
DIN EN ISO 105-B03:1997 Textiles - Tests for colour fastness - Part B03: Colour fastness to weathering: Outdoor exposure (ISO 105-B03:1994); German version EN ISO 105-B03:1997
DIN 12681:1998 Plastics laboratory ware - Graduated measuring cylinders (ISO 6706:1981, modified)
DIN EN ISO 4788:2005 Laboratory glassware - Graduated measuring cylinders (ISO 4788:2005); German version EN ISO 4788:2005
DIN V 40046-36:2006 Environmental testing - Part 36: Tests - Test Kx: Sulphur dioxide low concentration for contacts and connections
DIN 12781:1978-04 Laboratory glassware; straight enclosed scale laboratory thermometers for partial immersion

ES-AENOR, low level laboratory

Indonesia Standards, low level laboratory

SNI 03-6430.1-2000 Test methods for compressive strength of grouts for preplaced-aggregate concrete in the laboratory
SNI 2486-2011 Cara uji kuat tarik tidak langsung batu di laboratorium
SNI 03-4166-1996 Test method for shear strength of red brick walls in laboratory

International Organization for Standardization (ISO), low level laboratory

ISO 16000-23:2018 Indoor air — Part 23: Performance test for evaluating the reduction of formaldehyde and other carbonyl compounds concentrations by sorptive building materials
ISO 6507-3:1989 Metallic materials; hardness test; Vickers test; part 3: less than HV 0,2
ISO/TS 11371:1980 Pulps — Guidelines for using laboratory refiners to simulate industrial low consistency refining
ISO/TS 11371:2023 Pulps — Guidelines for using laboratory refiners to simulate industrial low consistency refining
ISO 5725:1981 Precision of test methods — Determination of repeatability and reproducibility by inter-laboratory tests
ISO 10062:1991 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
ISO/CD 5659:2023 Plastics — Smoke generation —Determination of optical density by a single-chamber test
ISO 718:1990 Laboratory glassware; thermal shock and thermal shock endurance; test methods
ISO 105-B03:2017 Textiles - Tests for colour fastness - Part B03: Colour fastness to weathering: Outdoor exposure
ISO 105-B03:1994 Textiles - Tests for colour fastness - Part B03: Colour fastness to weathering: Outdoor exposure
ISO 3507:1999 Laboratory glassware - Pyknometers
ISO 10062:2006 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
ISO 2921:2005 Rubber, vulcanized - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test)
ISO/CD TR 15262 Mechanical tests on metallic materials — Uncertainty in low-cycle fatigue
ISO 14271:2000 Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness)
ISO 7371:1995/Amd 1:1997 Household refrigerating appliances — Refrigerators with or without low-temperature compartment — Characteristics and test methods — Amendment 1: for the preservation of highly perishable foodstuffs
ISO 3452-6:2008 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 °C
ISO 649-2:1981 Laboratory glassware; Density hydrometers for general purposes; Part 2 : Test methods and use
ISO/TS 24498:2022 Paper, board and pulps — Estimation of uncertainty for test methods by interlaboratory comparisons
ISO 5925-1:2007 Fire tests - Smoke-control door and shutter assemblies - Part 1: Ambient- and medium-temperature leakage tests
ISO 4788:2005 Laboratory glassware - Graduated measuring cylinders
ISO 4788:1980 Laboratory glassware; Graduated measuring cylinders
ISO 6706:1981 Plastics laboratory ware; Graduated measuring cylinders
ISO 28702:2008 Rubber and plastics hoses and tubing - Textile-reinforced types - Sub-ambient temperature crush test
ISO/TR 24430:2003 Paints and varnishes - Guidelines for the determination of the precision of a test method by interlaboratory trials

国家市场监督管理总局、中国国家标准化管理委员会, low level laboratory

GB/T 2423.63-2019 Environmental testing—Part 2:Test methods—Test: combined temperature(cold and heat)/low air pressure/vibration（mixed mode）

YU-JUS, low level laboratory

JUS B.E8.131-1991 Insulating glass units. Determination of dew point temperature, Laboratory test

Association Francaise de Normalisation, low level laboratory

NF X15-016:1981 ENCLOSURES WITH AUTOMATIC TEMPERATURE AND HUMIDITY CONTROL.
NF A09-120-6*NF EN ISO 3452-6:2009 Non-destructive testing - Penetrant testing - Part 6 : penetrant testing at temperatures lower than 10 oC.
NF C20-740*NF EN 60068-2-40:2000 Environmental testing - Part 2 : tests - Test Z/AM : combined cold/low air pressure tests
NF G07-012-3*NF EN ISO 105-B03:2017 Textiles - Tests for colour fastness - Part B03 : colour fastness to weathering : outdoor exposure
NF B35-901:1983 Plastics laboratory ware. Graduated measuring cylinders.
NF EN ISO 14705:2021 Céramiques techniques - Méthode d'essai de dureté des céramiques monolithiques à température ambiante
NF X15-206:2022 Sorbonnes de laboratoire - Seuil pour les essais de confinement et de vitesse
NF ISO 16000-24:2019 Air intérieur - Partie 24 : essai de performance pour l'évaluation de la réduction des concentrations en composés organiques volatils par des matériaux de construction sorptifs
NF T60-101*NF EN ISO 3675:1998 Crude petroleum and liquid petroleum products. Laboratory determination of density. Hydrometer method.
NF S52-302*NF EN 915:2009 Gymnastic equipment - Asymmetric bars - Requirements and test methods including safety
NF C42-160-2*NF EN 60477-2:1998 Laboratory resistors. Part 2 : laboratory a.c. resistors.
NF B35-500:1983 Laboratory glassware. Liquid-in-glass laboratory thermometers. Principles of design, construction and use.
NF X43-404-24*NF ISO 16000-24:2019 Indoor air - Part 24 : performance test for evaluating the reduction of volatile organic compound concentrations by sorptive building materials
NF ISO 16000-23:2019 Air intérieur - Partie 23 : essai de performance pour l'évaluation de la réduction des concentrations en formaldéhyde et autres composés carbonylés par des matériaux de construction sorptifs
NF S52-720*NF ISO 7140:1994 Cross-country skis. Determination of dynamic performance. Laboratory measurement method.
NF EN ISO 105-E16:2008 Textiles - Essais de solidité des teintures - Partie E16 : solidité des teintures à la goutte d'eau sur les étoffes d'ameublement
NF C20-701/A1:1993 Environmental testing - Part 2 : tests - Tests A : cold.
NF C20-701:1993 Environmental testing - Part 2 : tests - Tests A : cold.
NF C20-701/A2:1995 Environmental testing - Part 2 : tests - Tests A : cold.
NF B35-656*NF EN ISO 4142:2002 Laboratory glassware - Test tubes
NF A05-107*NF EN ISO 10062:2008 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
NF A05-107:1995 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es).
NF X15-204:1986 Laboratory equipment. Benches. Test methods.
NF C42-160*NF EN 60477:1998 Laboratory d.c. resistors.
NF X15-202:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods.
NF X43-404-23*NF ISO 16000-23:2019 Indoor air - Part 23 : performance test for evaluating the reduction of formaldehyde and other carbonyl compounds concentrations by sorptive building materials
NF T51-659-2*NF EN ISO 5659-2:2017 Plastics - Smoke generation - Part 2 : Determination of optical density by a single-chamber test
NF T54-048:1977 Plastics. Low density polyethylene pipes. Preparation of specimens for physical testing.
NF C20-753*NF EN 60068-2-53:2010 Environmental testing - Part 2-53 : tests and guidance : combined climatic (temperature/humidity) and dynamic (vibration/shock) tests.
NF EN ISO 15186-3:2011 Acoustique - Mesurage par intensité de l'isolation acoustique des immeubles et des éléments de construction - Partie 3 : mesurages en laboratoire à de basses fréquences
NF EN ISO 17892-6:2017 Reconnaissance et essais géotechniques - Essais de laboratoire sur les sols - Partie 6 : essai de pénétration de cône
NF ISO 2921:2020 Caoutchouc vulcanisé - Détermination des caractéristiques à basse température - Méthode température-retrait (essai TR)
NF ISO 1432:2021 Caoutchouc vulcanisé ou thermoplastique - Détermination de la rigidité à basse température (Essai Gehman)
NF B35-302*NF EN ISO 4788:2005 Laboratory glassware - Graduated measuring cylinders

HU-MSZT, low level laboratory

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, low level laboratory

GJB 5389.38-2005 Test method of gun-launched missile Part 38:Low atmospheyic pressure (height) firing test
GJB 5491.32-2005 Test method of terminally guided projectile Part 32:Low pressure(Altitude)test
GJB 5895.30-2006 Test method for anti-tank missile Part 30: Low pressure (height) test

National Association of Corrosion Engineers (NACE), low level laboratory

NACE TM0193-2000 Laboratory Corrosion Testing of Metals in Static Chemical Cleaning Solutions at Temperatures Below 93 Degrees C (200 Degrees F)

British Standards Institution (BSI), low level laboratory

BS EN 60068-3-5:2002 Environmental testing - Guidance - Confirmation of the performance of temperature chambers
BS EN ISO 105-B03:1997 Textiles. Tests for colour fastness. Colour fastness to weathering. Outdoor exposure
BS EN ISO 17892-4:2016 Geotechnical investigation and testing. Laboratory testing of soil. Determination of particle size distribution
BS 593:1990 Specification for laboratory thermometers
BS 593:1989 Specification for laboratory thermometers
BS EN 60068-3-6:2002 Environmental testing - Guidance - Confirmation of the performance of temperature/humidity chambers
BS ISO 16000-24:2018 Tracked Changes. Indoor air. Performance test for evaluating the reduction of volatile organic compound concentrations by sorptive building materials
BS EN 60068-2-53:2010 Environmental testing - Tests and guidance - Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
BS EN ISO 3452-6:2009 Non-destructive testing. Penetrant testing. Penetrant testing at temperatures lower than 10 degrees C
BS EN ISO 3452-6:2008 Non-destructive testing - Penetrant testing - Penetrant testing at temperatures lower than 10 degrees C
BS EN 60068-2-1:2007 Environmental testing - Tests - Test A. Cold
BS EN 60068-2-39:1999 Environmental testing - Test methods - Tests - Test Z/AMD - Combined sequential cold, low air pressure and damp heat test
BS EN ISO 17892-3:2015 Geotechnical investigation and testing. Laboratory testing of soil. Determination of particle density
BS EN ISO 17892-2:2014 Geotechnical investigation and testing. Laboratory testing of soil. Determination of bulk density
BS EN ISO 10062:2008 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
BS EN ISO 105-E16:2007 Textiles - Tests for colour fastness - Colour fastness to water spotting on upholstery fabrics
PD ISO/TS 11371:2023 Tracked Changes. Pulps. Guidelines for using laboratory refiners to simulate industrial low consistency refining
BS EN 60068-2-78:2013 Environmental testing. Tests. Test Cab: Damp heat, steady state
BS EN 60068-2-78:2002 Environmental testing - Test methods - Test Cab - Damp heat, steady state
BS EN ISO 11378-2:2001 Textile floor coverings - Laboratory soiling tests - Drum test
BS EN ISO 15212-1:1999 Oscillation-type density meters — Part 1: Laboratory instruments
BS EN ISO 4788:2005 Laboratory glassware - Graduated measuring cylinders
BS ISO 28702:2008 Rubber and plastics hoses and tubing - Textile reinforced types - Sub-ambient temperature crush test
BS EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
BS EN 14727:2006 Laboratory furniture. Storage units for laboratories. Requirements and test methods
BS EN 3745-405:2012 Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Low/High temperature bend test
BS EN 60068-3-1:1999 Environmental testing - Guidance - Cold and dry heat tests - Cold and dry heat tests

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., low level laboratory

ASHRAE SF-98-20-1-1998 Test Method for Describing Directional Sensitivity of Anemometers for Low-Velocity Measurements Indoors
ASHRAE SF-98-20-4-1998 Impact of Velocity and Temperature Fluctuations on the Accuracy of Low-Velocity Measurements Indoors by Thermal Anemometers
ASHRAE 4606-2003 Validation of a CFD Model for Temperature and Particulate Concentration in a Test Room with Mixed Air and Displacement Ventilation

AT-ON, low level laboratory

ONORM EN 24672-1993 Rubber and plastics hoses - Sub-ambiant temperature flexibility tests (ISO 4672:1988)

Defense Logistics Agency, low level laboratory

DLA A-A-51822 A-1987 CYLINDER, GRADUATED, LABORATORY [Use In Lieu Of: DLA A-A-0051822]

National Metrological Verification Regulations of the People's Republic of China, low level laboratory

JJG 119-2005 Laboratory pH Meters
JJG 119-1984 Verification Regulation for Laboratory pH Meter
JJG 119-2018 Laboratory pH (acidity) meter verification procedures

CZ-CSN, low level laboratory

CSN 72 1026-1992 Laboratory determination of the Shear Strength of soils by vane test
CSN 25 8133-1965 Glass thermometers. Laboratory micro thermometers
CSN 25 8131-1965 Glass thermometers. Laboratory glass thermometers with enclosed scale
CSN 34 6422-1961 Tests of thermal aging of varnished wires on basis of decrease of electric strength of lacquer film
CSN ISO 2921:1994 Rubber, vulcanized. Determination of low temperature characteristics. Temperature-retraction procedure (TR test)
CSN 72 1015-1988 Laboratory determination of com- pactibility of soils
CSN 25 8140-1965 Laboratory glass thermometers with tra- versable scale
CSN 25 8134-1965 Glass thermometers. Laboratory glass thermometers with fine scale
CSN 25 8132-1965 Glass thermometers. Laboratory glass distillation thermometers

Professional Standard - Energy, low level laboratory

NB/SH/T 6001-2020 Guidelines for interlaboratory studies to determine the precision of test methods

TR-TSE, low level laboratory

TS 2651-1977 Rubber, Vulcanized - Determination Of Stiffness At Low Temperature (Gehman Test)

PL-PKN, low level laboratory

PN C89055-1986 Plastics sheeting Test metods of the resistance to Iow temperatur?
PN S13715-1965 Glass thermometers Laboratórial thermometers

工业和信息化部/国家能源局, low level laboratory

JB/T 13163-2017 Test method for fatigue strength of low-speed automobile brakes

Danish Standards Foundation, low level laboratory

DS/EN ISO 105-B03:1998 Textiles - Tests for colour fastness - Part B03: Colour fastness to weathering: Outdoor exposure
DS/EN ISO 5659-2:2013 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test
DS/EN ISO 105-E16:2007 Textiles - Tests for colour fastness - Part E16: Colour fastness to water spotting on upholstery fabrics
DS/EN 24672:1993 Rubber and plastics hoses. Sub-ambient temperature flexibility tests
DS/EN ISO 4788:2005 Laboratory glassware - Graduated measuring cylinders

VN-TCVN, low level laboratory

TCVN 7699-2-40-2007 Environmental testing.Part 2-40: Tests.Test Z/AM: Combined cold/low air tests
TCVN 5468-2007 Textiles.Tests for colour fastness.Part B03: Colour fastness to weathering: Outdoor exposure
TCVN 7699-2-39-2007 Environmental testing.Part 2-39: Tests.Test Z/AMD: Combined sequential cold, low air pressure and damp heat test
TCVN 7699-2-1-2007 Environmental testing.Part 2-1: Tests.Test A: Cold
TCVN 7699-2-13-2007 Environmental testing.Part 2-13: Tests.Test M: Low air pressure

Taiwan Provincial Standard of the People's Republic of China, low level laboratory

CNS 13957-1997 Method of test for tensile strength of fine ceramics at room and elevated temperature
CNS 12866-1991 Basic Environmental Testing Procedures Part 2 : Tests-Test Z/AM : Combined Cold/Low Air Pressure Tests

International Electrotechnical Commission (IEC), low level laboratory

IEC 60068-2-39:2015 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
IEC 60068-2-40:1976 Basic environmental testing procedures. Part 2 : Tests. Test Z/AM: Combined cold/low air pressure tests
IEC 60068-2-1:1990 Environmental testing; part 2: tests; tests A: cold
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60068-2-40:1976/AMD1:1983 Basic environmental testing procedures. Part 2 : Tests. Test Z/AM: Combined cold/low air pressure tests
IEC 60068-2-53:2010 Environmental testing - Part 2-53: Tests and guidance - Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
IEC 60068-2-13:1983 Environmental testing. Part 2: Tests. Test M: Low air pressure

Standard Association of Australia （SAA）, low level laboratory

AS 60068.2.78:2003 Environmental testing - Tests - Test Cab: Damp heat, steady state
AS 60068.2.41:2003 Environmental testing - Tests - Test Z/BM: Combined dry heat/low air pressure tests
AS 60068.2.40:2003 Environmental testing - Tests - Test Z/AM: Combined cold/low air pressure tests

Professional Standard - Agriculture, low level laboratory

CNAS-GL043-2020 Guidelines for the Evaluation of Uncertainty in Measurement of ELISA Tests in Veterinary Testing Laboratories

SE-SIS, low level laboratory

SIS SMS 2562-1971 Automobiles. Protective screen between driver's compartment and loading compartment. Strength requirements and testing

Professional Standard - Ocean, low level laboratory

HY/T 048-1999 SYA2-1 laboratory salinity meter

European Committee for Electrotechnical Standardization（CENELEC）, low level laboratory

HD 323.2.40 S1-1988 Basic Environmental Testing Procedures - Part 2: Tests Test Z/AM: Combined Cold/Low Air Pressure Tests
EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
EN 60068-2-13:1999 Environmental Testing - Part 2: Tests - Test M: Low Air Pressure

Professional Standard - Electron, low level laboratory

SJ/Z 9065-1987 Laboratory equipment
SJ/T 10212-1991 Testing equipment,high and low temperature/low air pressure Y60600-G

ES-UNE, low level laboratory

UNE 202009-38:2020 Methodology for the verification and inspection of low voltage electrical installations in operating theatres and intervention rooms.

PH-BPS, low level laboratory

PNS ISO 17892-2:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density
PNS ISO 17892-3:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density
PNS ISO 17892-4:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution

Professional Standard-Ships, low level laboratory

CB/Z 20013-2012 Procedure for model test on submarine wake characteristics in low speed wind tunnel

Professional Standard - Textile, low level laboratory

FZ/T 50038-2017 Test method for bonding temperature of low melting point polyester (PET) composite fibers

US-FCR, low level laboratory

FCR FED H-08-1 SEC 01410-2004 TESTING LABORATORY SERVICES
FCR VA 01 45 29-2012 TESTING LABORATORY SERVICES

Professional Standard - Machinery, low level laboratory

JB/T 11938-2014 Ammonia-nitrogen automatic analyzers for laboratory.Nessler's reagent spectrophotometry

TH-TISI, low level laboratory

TIS 2380.2-1-2012 Environmental testing.part 2-1: tests.test a: cold

CENELEC - European Committee for Electrotechnical Standardization, low level laboratory

EN 60068-2-1:1993 Environmental Testing Part 2: Tests Tests A: Cold

BE-NBN, low level laboratory

NBN T 31-031-1985 Rubber, vulcanized - Determinationof low temperature characteristics- Temperature-re-traction procedure(TR test)

Professional Standard - Electricity, low level laboratory

DL 502-1992 Water and steam test methods for thermal power plants Determination of low turbidity

ZA-SANS, low level laboratory

SANS 4788:1980 Laboratory glassware - Graduated measuring cylinders
SANS 4788:2009 Laboratory glassware - Graduated measuring cylinders

中国气象局, low level laboratory

QX/T 322-2016 Thermometry Laboratory Technical Requirements
QX/T 321-2016 Technical requirements for humidity measurement laboratories

NATO - North Atlantic Treaty Organization, low level laboratory

AMEDP-8.5-2017 MINIMUM TEST REQUIREMENTS FOR LABORATORY UNITS OF IN THEATRE MILITARY MEDICAL TREATMENT FACILITIES (MTFs) (ED A@ Ver. 2)
AMEDP-8.5-2013 MINIMUM TEST REQUIREMENTS FOR LABORATORY UNITS OF IN THEATRE MILITARY MEDICAL TREATMENT FACILITIES (MTFs) (ED A@ Ver 1)

Heilongjiang Provincial Standard of the People's Republic of China, low level laboratory

DB23/T 1615-2015 Guidelines for the Application of Evaluation Specifications for Building Materials Enterprise Laboratories Cement Enterprise Laboratories