ZH
RU
ES

Raman+Peak+Intensity

Raman+Peak+Intensity, Total:498 items.

In the international standard classification, Raman+Peak+Intensity involves: Analytical chemistry, Quality, Water quality, Rubber, Iron and steel products, Testing of metals, Plastics, Rubber and plastics products, Construction materials, Footwear, Structures of buildings, Textile fibres, Waxes, bituminous materials and other petroleum products, Leather technology, Test conditions and procedures in general, Materials for aerospace construction, Powder metallurgy, Metalliferous minerals, Mining and quarrying, Ferrous metals, Fasteners, Bridge construction, Adhesives, Fibre optic communications, Products of the textile industry, Paper and board, Products of the chemical industry, Mechanical testing, Paint coating processes, Welding, brazing and soldering, Paper products, Continuous handling equipment, Fluid power systems, Surface treatment and coating, Headgear. Clothing accessories. Fastening of clothing, Materials for the reinforcement of composites, Reinforced plastics, Conducting materials, Wood technology processes, Insulating fluids, Flexible drives and transmissions, Pulps, Springs, Jewellery, Wood-based panels, Farming and forestry, Ceramics, Refractories, Seals, glands, Freight distribution of goods, Electrical accessories, Tobacco, tobacco products and related equipment, Earthworks. Excavations. Foundation construction. Underground works, Wood, sawlogs and sawn timber.

American Society for Testing and Materials (ASTM), Raman+Peak+Intensity

ASTM E2911-23 Standard Guide for Relative Intensity Correction of Raman Spectrometers
ASTM E2911-13 Standard Guide for Relative Intensity Correction of Raman Spectrometers
ASTM A679/A679M-06 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
ASTM C1583/C1583M-20 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
ASTM A679/A679M-00 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
ASTM A679/A679M-17 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
ASTM A679/A679M-06(2012) Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
ASTM D1320-73(1983)e1 Method of Tensile Strength of Paraffin Wax
ASTM C1583/C1583M-04e1 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
ASTM D2061-93(1998) Standard Test Methods for Strength Tests for Zippers
ASTM A70-44 Specification for Low and Intermediate Tensile Strength Carbon-Steel
ASTM D2061-07(2021) Standard Test Methods for Strength Tests for Zippers
ASTM D1424-07a Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
ASTM D1424-09(2013)e1 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
ASTM D2061-07 Standard Test Methods for Strength Tests for Zippers
ASTM D2061-03 Standard Test Methods for Strength Tests for Zippers
ASTM D2209-00(2004) Standard Test Method for Tensile Strength of Leather
ASTM D2209-00 Standard Test Method for Tensile Strength of Leather
ASTM D2209-00(2021) Standard Test Method for Tensile Strength of Leather
ASTM D2209-00(2015) Standard Test Method for Tensile Strength of Leather
ASTM D2209-00(2010) Standard Test Method for Tensile Strength of Leather
ASTM D2061-07(2013) Standard Test Methods for Strength Tests for Zippers
ASTM C1006-07(2013) Standard Test Method for Splitting Tensile Strength of Masonry Units
ASTM C1860-19a Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-21 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-19 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-23 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-18 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-20 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-23a Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-22 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-23c Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1006-07 Standard Test Method for Splitting Tensile Strength of Masonry Units
ASTM D2095-96e1 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM C297-94(1999) Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions

Group Standards of the People's Republic of China, Raman+Peak+Intensity

T/CAQI 109-2020 Specification for quality evaluation of bio-inspired surface enhanced Raman substrate
T/AHEMA 24-2022 Surface-enhanced Raman Scattering (SERS) Substrate for Water Environment Monitoring
T/GDC 242-2023 Modified High Density Polyethylene (Ds PE) Double Order Peak Enhancement Tube
T/GDASE 0013-2020 Determination of Defect Degree in Graphene Powder by Laser Microscopy Confocal Raman Spectroscopy
T/GZHG 024-2022 Nano-modified high-density polyethylene (MUHDPE) double-peak reinforced buried drainage pipe
T/ZZB 1008-2019 High strength stretch hood shrink film
T/GDC 84-2021 Nano-modified high-density polyethylene (MUHDPE) double-peak reinforced drainage pipe for buried
T/YNSX 006-2022 High molecular weight high density polyethylene (HMWHDPE) double crest reinforced reinforced winding structure wall drainage pipe

German Institute for Standardization, Raman+Peak+Intensity

DIN 51866-2:2001-08 Temperature measurement - Part 2: Rayleigh- and Raman scattering
DIN EN ISO 10734:2016-10 Footwear - Test method for slide fasteners - Strength of slide fastener pullers (ISO 10734:2016); German version EN ISO 10734:2016
DIN ISO 6133:2004 Rubber and plastics - Analysis of multipeak traces obtained in determination of tear strength and adhesion strength (ISO 6133:1998)
DIN ISO 6133:2017 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength (ISO 6133:2015)
DIN EN ISO 10734:2016 Footwear - Test method for slide fasteners - Strength of slide fastener pullers (ISO 10734:2016)
DIN EN ISO 8256:2005 Plastics - Determination of tensile-impact strength (ISO 8256:2004); German version EN ISO 8256:2004
DIN EN ISO 8256:2022-09 Plastics - Determination of tensile-impact strength (ISO/DIS 8256:2022); German and English version prEN ISO 8256:2022 / Note: Date of issue 2022-08-12*Intended as replacement for DIN EN ISO 8256 (2005-05).
DIN EN ISO 12625-4:2005 Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at break and tensile energy absorption (ISO 12625-4:2005); German version EN ISO 12625-4:2005
DIN 50125:2016 Testing of metallic materials - Tensile test pieces
DIN 50125:2009 Testing of metallic materials - Tensile test pieces
DIN EN 582:1994 Thermal spraying; determination of tensile adhesive strength; German version EN 582:1993
DIN EN 13780:2003 Touch and close fasteners - Determination of longitudinal shear strength; German version EN 13780:2003
DIN EN ISO 10717:2011-03 Footwear - Test methods for slide fasteners - Burst strength (ISO 10717:2010); German version EN ISO 10717:2010
DIN 52377:2016-07 Testing of plywood - Determination of modulus of elasticity in tension and of tensile strength
DIN 52377:1978 Testing of plywood; determination of modulus of elasticity in tension and of tensile strength
DIN 52377:2016 Testing of plywood - Determination of modulus of elasticity in tension and of tensile strength
DIN EN 14488-3:2021-05 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens; German and English version prEN 14488-3:2021 / Note: Date of issue 2021-04-09*Intended as replacement for DIN EN 14488-3 (2006...
DIN EN 14488-3:2006-09 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens; German version EN 14488-3:2006 / Note: To be replaced by DIN EN 14488-3 (2021-05).
DIN EN 17468-1:2020 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 1: Flat sheets; German and English version prEN 17468-1:2020
DIN EN 17468-1:2022 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 1: Flat sheets
DIN EN ISO 10748:2011-06 Footwear - Test method for slide fasteners - Slider locking strength (ISO 10748:2011); German version EN ISO 10748:2011
DIN ISO 15754:2010-04 Paper and board - Determination of z-directional tensile strength (ISO 15754:2009)
DIN EN ISO 21180:2013-09 Light conveyor belts - Determination of the maximum tensile strength (ISO 21180:2013); German version EN ISO 21180:2013
DIN EN 6129:2017-04 Aerospace series - Blind bolt, protruding head, high strength, pulltype; German and English version EN 6129:2016 + AC:2017
DIN EN 15870:2009-08 Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987 modified); German version EN 15870:2009
DIN EN ISO 8256:2005-05 Plastics - Determination of tensile-impact strength (ISO 8256:2004); German version EN ISO 8256:2004 / Note: To be replaced by DIN EN ISO 8256 (2022-09).
DIN EN 17468-2:2020 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets; German and English version prEN 17468-2:2020
DIN EN 17468-2:2022 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Raman+Peak+Intensity

GB/T 12833-1991 Rubber and plastics--Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
GB/T 36705-2018 Test method for carrier concentration of gallium nitride substrates—Raman spectrum method
GB/T 12833-2006 Rubber and plastics. Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
GB/T 33429-2016 Silicone rubber compunds.High tear strength type and high tensile strength type
GB/T 31304-2014 Epoxy-coated high strength wire stay cable
GB/T 8641-1988 Thermal sprayed coatings--Determination of tensile strength
GB/T 1701-2001 Ebonite-Determination of tensile strength and elongation at break
GB/T 11718.7-1989 Medium density fiberboard--Determination of flush tensile strength
GB/T 8721-2009 Method for the determination of tensile strength of carbonaceous materials
GB/T 8721-2019 The test method for tensile strength of carbon materials
GB/T 1452-2005 Test method for flatwise tension strength of sandwich constructions
GB/T 14017-2009 Method of testing in tensile strength perpendicular to grain of wood
GB/T 1938-2009 Methods of testing in tensile strength parallel to grain of wood
GB/T 8642-2002 Thermal spraying--Determination of tensile adhesive strength
GB/T 8721-1988 Method for the determination of tensile strength of carbonaceous materials
GB/T 14017-1992 Method of testing in tensile strength perpendicular to grain of wood
GB/T 1938-1991 Method of testing in tensile stength parallel to grain of wood
GB/T 6761-1986 Flat transmission belting--Test method of full thickness tensile strength and elongation
GB/T 28487-2012 Precious metal alloys chains.Determination of tensile strength.Method of tensile testing
GB/T 32330-2015 Light conveyor belts.Determination of the maximum tensile strength
GB/T 3686-1998 V-btlts--Tensile strength and elongation test method
GB/T 6329-1996 Adhesives--Determination of tensile strength of butt joints
GB/T 23805-2009 Fine ceramics(advanced ceramics,advanced technical ceramics).Test method for tensile strength of monolithic ceramics at room temperature
GB/T 1452-1987 Test method for flatwise tension strength of nonmetal sandwich constructions

Qinghai Provincial Standard of the People's Republic of China, Raman+Peak+Intensity

DB63/T 1110-2012 High Tensile Steel Tie Rod

SE-SIS, Raman+Peak+Intensity

SIS SS 24 21 23-1982 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
SIS MNC 1109-1982 Stee/ - Comparison between hardness values and tensile strength
SIS SS 92 35 10-1983 Floorings - Determination of tensile strength
SIS PR 20 04 01
SIS SS 14 01 10-1984 Grey iron — Tensile strength in separately cast test samples
SIS SMS 2334-1970 Mechanical couplings for tractors and trailers Testing of strength
SIS SS 25 12 68-1985 Textiles — Woven fabrics — Determination of breaking strength — Grab method
SIS SMS 2333-1970 Mechanical couplings for tractors and trailers Strength requirement

AENOR, Raman+Peak+Intensity

UNE 53612:1984 RUBBER-ANALYSIS OF MULTI-PEAK TRACES OBTAINED IN DETERMINATIONS OF TEAR STRENGTH AND ADHESION STRENGTH
UNE 49408-5:1975 TEST OF PAPER BAGS. TENSILE STRENGTH OF LONGITUDINAL STRENGTH
UNE 59501:1992 FOOTWEAR. TENSILE STRENGTH OF FIBREBOARD.
UNE 59611:1994 FOOTWEAR MATERIALS. LACES. DETERMINATION TENSILE STRENGTH.
UNE-ISO 15754:2012 Paper and board - Determination of z-directional tensile strength
UNE-ISO 3781:2015 Paper and board - Determination of tensile strength after inmersion in water
UNE-EN ISO 8256:2005 Plastics - Determination of tensile-impact strength (ISO 8256:2004)
UNE-EN 14488-3:2007 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
UNE 83515:2010 Fibre reinforced concrete. Determination of cracking strength, ductility and residual tensile strength. Barcelona test.
UNE 25003:1978 DRAW HOOK COUPLING FOR RAILBOUND VEHICLES OF SPANISH NORMAL WIDTH. MINIMUM TENSILE STRENGTH, 85 T.

CZ-CSN, Raman+Peak+Intensity

CSN 64 0725-1957
CSN 63 5217-1985 Determination of tensile strength
CSN 80 0700-1974 Testing of single thread tensile strer.gth
CSN 50 0410-1975 Determination of wet tensile strength o? pnper
CSN 73 1318-1986 Determination of tensile strength of concrete
CSN 42 0891 Cast.2-1986 Testing of sintered products. Tensile strength test
CSN 49 0171-1983 Plywoods Determínation of tenslle strength
CSN 80 0812-1982 Fiat textiles. Determination of tensile strength and drawing quality
CSN 42 0330-1983 Metal testing. Grey cast iron. Determination of tensile strength
CSN 50 0341-1962 Paper testing — Tensile strength of wet áper
CSN ISO 4108:1994 Concrete.Determination of tensile splitting strength of test specimens
CSN ISO 3376:1994 Leather.Determination of tensile strength and elongation
CSN ON 49 0191-1967 Tensile strenght perpendicularly to the surface o? honeycombed board.
CSN 80 0700-1984 Testing of single thread tensile strength and elongation
CSN 49 0151-1983 Fiberboards. Determination of tension strength perpendicular to the plane of tne panel
CSN ON 49 0192-1967 Tensile strenght perpendicularly to the surface of honeycombed board mantle.
CSN 72 5016-1982 Testing of ceramic electrotechnic materials. Definition of the tensile strength
CSN 73 1353-1976 Determiiiation of tensilo and flexui al strengths of cellular concreto

FI-SFS, Raman+Peak+Intensity

SFS 5445-1988 BETONI. VETOLUJUUS

ES-UNE, Raman+Peak+Intensity

UNE-EN ISO 10734:2016 Footwear - Test method for slide fasteners - Strength of slide fastener pullers (ISO 10734:2016)
UNE-ISO 6133:2022 Rubber and plastics. Analysis of multi-peak traces obtained of determinations of tear strength and adhesion strength
UNE-EN ISO 10764:2016 Footwear - Test methods for slide fasteners - Lateral strength (ISO 10764:2016)
UNE 59611:2018 Footwear materials. Laces. Determination of tensile strength
UNE-EN 6129:2016 Aerospace series - Blind bolt, protruding head, high strength, pulltype (Endorsed by AENOR in October of 2016.)
UNE-EN ISO 21180:2013 Light conveyor belts - Determination of the maximum tensile strength (ISO 21180:2013) (Endorsed by AENOR in April of 2013.)

NZ-SNZ, Raman+Peak+Intensity

AS/NZS 3889:1993 Rubber and Plastics - Analysis of Multi-Peak Traces Obtained in Determinations of Tear Strength and Adhesion Strength

British Standards Institution (BSI), Raman+Peak+Intensity

BS EN 14488-3:2006 Testing sprayed concrete - Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
BS ISO 6133:1998 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
BS EN ISO 10734:2016 Footwear. Test method for slide fasteners. Strength of slide fastener pullers
BS ISO 6133:2015 Tracked Changes. Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
BS 2TA 56:2009 Specification for plate of titanium-aluminium-vanadium alloy (tensile strength 895-1150 MPa) (maximum thickness 100 mm)
BS EN ISO 8256:2004 Plastics - Determination of tensile-impact strength
BS ISO 15361:2000 Pulps. Determination of zero-span tensile strength, wet or dry
BS 2922-2:1984 Strength of wet paper and board - Method for determination of the tensile strength of paper and board after immersion in water
BS EN ISO 10717:2010 Footwear. Test method for slide fasteners. Burst strength
BS ISO 3781:2011 Paper and board. Determination of tensile strength after immersion in water
BS EN 13780:2004 Touch and close fasteners - Determination of longitudinal shear strength
BS EN 13780:2003 Touch and close fasteners - Determination of longitudinal shear strength
BS EN ISO 10764:2016 Footwear. Test methods for slide fasteners. Lateral strength
BS EN 13780:2003(2004) Touch and close fasteners - Determination of longitudinal shear strength
BS EN ISO 17706:2018 Footwear. Test methods for uppers. Tensile strength and elongation
BS ISO 4347:2015 Leaf chains, clevises and sheaves. Dimensions, measuring forces, tensile strengths and dynamic strengths
BS EN 15870:2009 Adhesives - Determination of tensile strength of butt joints
BS ISO 15754:2009 Paper and board - Determination of z-directional tensile strength
BS EN ISO 21180:2013 Light conveyor belts. Determination of the maximum tensile strength
BS EN ISO 12625-4:2016 Tissue paper and tissue products. Determination of tensile strength, stretch at maximum force and tensile energy absorption
BS EN ISO 12625-5:2005 Tissue paper and tissue products - Determination of wet tensile strength
BS EN 60793-1-31:2002 Optical fibres - Measurement methods and test procedures - Tensile strength
BS EN 60793-1-31:2010 Optical fibres. Measurement methods and test procedures. Tensile strength
2TA 10-1974 Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa)

国家市场监督管理总局、中国国家标准化管理委员会, Raman+Peak+Intensity

GB/T 38037-2019 Footwear—Test method for slide fasteners—Strength of slide fastener pullers
GB/T 38034-2019 Footwear—Test methods for slide fasteners—Lateral strength
GB/T 37794-2019 Carbon fibre—Determination of knot strength

GM North America, Raman+Peak+Intensity

GM GM9205P-1993 Test for Tensile Strength of a Channeled Zipper Chain
GM GM173M-1991 High Strength Die Drawn Steel Bars
GM GM4452P-1988 Measuring Tensile Strength of Electrodeposits
GM GM178M-1988 Spring Materials High Tensile, Hard Drawn, Steel Spring Wire

Association Francaise de Normalisation, Raman+Peak+Intensity

NF T46-055:2005 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength.
NF ISO 6133:2015 Caoutchouc et plastiques - Analyse des tracés multi-pics obtenus lors des déterminations de la résistance au déchirement et de la force d'adhérence
NF T46-055*NF ISO 6133:2015 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
NF G62-609*NF EN ISO 10734:2016 Footwear - Test methods for slide fasteners - Strength of slide fastener pullers
NF T60-127:1974 Tensile strength of paraffin wax.
NF P18-511-3*NF EN 14488-3:2006 Testing sprayed concrete - Part 3 : flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
NF T51-111*NF EN ISO 8256:2005 Plastics - Determination of tensile-impact strength
NF X41-021:1996 Self adhesive tapes. Measurement of breaking strength.
NF EN ISO 8256:2005 Plastiques - Détermination de la résistance au choc-traction
NF ISO 4919:2020 Moquettes - Détermination de la force d'arrachement de touffes
NF T46-055:1990 Vulcanized or thermoplastic rubber. Analysis of the multipeak traces obtained when determining the adhesive strength and the tear strength.
NF Q34-030-4:2005 Tissue paper and tissue products - Part 4 : determination of tensile strength, stretch at break and tensile energy absorption.
NF G62-608*NF EN ISO 10717:2011 Footwear - Test method for slide fasteners - Burst strength.
NF A91-211*NF EN ISO 14916:2017 Thermal spraying - Determination of tensile adhesive strength
NF EN 13780:2003 Fermetures auto-agrippantes - Détermination de la résistance à la traction longitudinale
NF EN ISO 10833:2019 Revêtements de sol textiles - Détermination de la résistance des joints par l'essai au tambour Vettermann modifié
NF G62-610*NF EN ISO 10748:2011 Footwear - Test method for slide fasteners - Slider locking strength.
NF T51-111:1997 Plastics. Determination of tensile-impact strength.
NF A91-211:1994 Thermal spraying. Determination of tensile adhesive strength.
NF G62-614*NF EN ISO 10764:2016 Footwear - Test methods for slide fasteners - Lateral strength
NF E26-107*NF ISO 4347:2015 Leaf chains, clevises and sheaves - Dimensions, measuring forces, tensile strengths and dynamic strengths
NF EN ISO 3379:2015 Cuir - Détermination de l'extension et de la résistance à la traction de la surface (méthode de la bille)
NF T76-123*NF EN 15870:2009 Adhesives - Determination of tensile strength of butt joints.
NF T47-156*NF EN ISO 21180:2013 Light conveyor belts - Determination of the maximum tensile strength
NF G91-112*NF EN 13780:2003 Touch and close fasteners - Determination of longitudinal shear strength
NF T76-123:1993 Adhesives. Determination of tensile strength of butt joints.
NF G52-007:1976 Determination of extension and tensile strength of the surface of a leather.
NF L22-006*NF EN 6129:2016 Aerospace series - Blind bolt, protruding head, high strength, pulltype
NF EN ISO 10750:2018 Chaussures - Méthode d'essai pour les fermetures à glissière - Résistance d'attachement des extrémités
NF EN ISO 21180:2013 Courroies transporteuses légères - Détermination de la résistance maximale à la traction
NF EN 15870:2009 Adhésifs - Détermination de la résistance en traction des joints bout à bout
NF P33-402-2*NF EN 17468-2:2022 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2 : profiled sheets
NF P90-134*NF EN 13864:2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns

International Organization for Standardization (ISO), Raman+Peak+Intensity

ISO 6133:2015 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO 6133:1981 Rubber and plastics; Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO 10734:2016 Footwear - Test method for slide fasteners - Strength of slide fastener pullers
ISO 8256:2004 Plastics - Determination of tensile-impact strength
ISO 8256:1990 Plastics; determination of tensile-impact strength
ISO/TR 10108:1989 Steel; conversion of hardness values to tensile strength values
ISO 1924:1976 Paper and board — Determination of tensile strength
ISO 1924:1974 Title missing - Legacy paper document
ISO/DIS 8256:2023 Plastics — Determination of tensile-impact strength
ISO/FDIS 8256:2023 Plastics — Determination of tensile-impact strength
ISO 14916:2017 Thermal spraying - Determination of tensile adhesive strength
ISO 10717:2010 Footwear - Test method for slide fasteners - Burst strength
ISO 14916:1999 Thermal spraying - Determination of tensile adhesive strength
ISO 4136:1989 Fusion-welded butt joints in steel; transverse tensile tests
ISO 4136:2022 Destructive tests on welds in metallic materials — Transverse tensile test
ISO 10748:2011 Footwear - Test method for slide fasteners - Slider locking strength
ISO 6922:1987 Adhesives; Determination of tensile strength of butt joints
ISO 4108:1980 Concrete; Determination of tensile splitting strength of test specimens
ISO 10764:2016 Footwear - Test methods for slide fasteners - Lateral strength
ISO 3376:2020 Leather — Determination of tensile strength and elongation
ISO 3376:1976 | IULTCS Leather — Determination of tensile strength and elongation
ISO 4587:1979 Adhesives; Determination of tensile lap-shear strength of high strength adhesive bonds
ISO 17706:2003 Footwear - Test methods for uppers - Tensile strength and elongation
ISO 14590:1999 Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
ISO 14590:2005 Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
ISO 14590:2016 Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
ISO 4347:2015 Leaf chains, clevises and sheaves - Dimensions, measuring forces, tensile strengths and dynamic strengths
ISO 21180:2005 Light conveyor belts - Determination of the maximum tensile strength
ISO 3376:1976 Leather; Determination of tensile strength and elongation
ISO 21180:2013 Light conveyor belts - Determination of the maximum tensile strength
ISO 15754:2009 Paper and board - Determination of z-directional tensile strength
ISO 8256:1990/Cor 1:1991 Plastics; determination of tensile-impact strength; technical corrigendum 1
ISO 3345:1975 Wood; Determination of ultimate tensile stress parallel to grain
ISO 3346:1975 Wood; Determination of ultimate tensile stress perpendicular to grain

TR-TSE, Raman+Peak+Intensity

TS 245-1965 METHOD OF DETERMINING THE TENSILE STRENGHT AND ELNGATION OF A SINGLE STRAND YARN
TS 2027-1975 DETERMINATION OF DIRECT TENSILE STRBNGTH OF ROCKS
TS 3121-1978 Determination Of Tensile Strength Of Paper And Board
TS 2707-1977 EBONITE DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK
TS 3129-1978 Splitting Tensile Strength Of Cylindrical Concrete Specimens
TS 2476-1976 Wood - Dete?mination of Ultimate Tensile Stress Perpendicular to G?ain
TS 2475-1976 Wood-Determination of Ultimate Tensile Stress Parallel to Grain

YU-JUS, Raman+Peak+Intensity

JUS G.S2.152-1985 Rubber and plastics. Analysis of multi-peak traces obtained in determination of tear strength and adhesion strength
JUS G.S2.028-1984 Leather. Determination of tensile strength and elongation
JUS D.A8.066-1985 Testing of plywood. Determination of tensile strength
JUS G.E2.310-1983 Steel cord conveyor belts. Measurement of tensile strength
JUS U.M1.022-1992 Concrete - Determination of tensile splitting strength of test specimens

Danish Standards Foundation, Raman+Peak+Intensity

DS/ISO 6133:1981 Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
DS/EN 26922:1994 Adhesives-Determination of tensile strength of butt joints
DS/EN 582:1993 Thermal spraying. Determination of tensile adhesive strength
DS/EN ISO 8256:2004 Plastics - Determination of tensile-impact strength
DS 1097.9:1982 Floorings. Tensile strength and elongation at rupture
DS/EN 582:1994 Thermal spraying - Determination of tensile adhesive strength
DS/EN ISO 10717:2011 Footwear - Test method for slide fasteners - Burst strength
DS 423.24:1984 Testing of concrete. Hardened concrete. Tensile strength
DS 423.31:1984 Testing of concrete. Hardened concrete. Pull-out strength
DS/EN ISO 10748:2011 Footwear - Test method for slide fasteners - Slider locking strength
DS/EN 15870:2009 Adhesives - Determination of tensile strength of butt joints
DS/EN ISO 21180:2013 Light conveyor belts - Determination of the maximum tensile strength
DS/EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens

Japanese Industrial Standards Committee (JISC), Raman+Peak+Intensity

JIS K 6274:2006 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
JIS K 6274:2018 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
JIS L 1069:2002 Tensile strength tests of natural fibres
JIS M 0303:2000 Method of test for tensile strength of rock
JIS L 1069:1995 Tensile strength tests of natural fibres
JIS M 0303:1975 Method of test for tensile strength of rock
JIS G 3474:2008 High tensile strength steel tubes for steel tower
JIS G 3474:2014 High strength steel tubes for steel tower
JIS G 3129:1995 High tensile strength steel for tower structural purposes
JIS G 3129:2005 High tensile strength steel for tower structural purposes
JIS G 3474:2021 High strength steel tubes for steel tower
JIS P 8113:1998 Paper and board -- Determination of tensile properties
JIS G 3474:1995 High tensile strength steel tubes for tower structural purposes
JIS K 7160:1996 Plastics -- Determination of tensile-impact strength
JIS Z 3212:1990 Covered electrodes for high tensile strength steel
JIS Z 3212:2000 Covered electrodes for high tensile strength steel
JIS K 7094:2012 Test method for open-hole tensile strength of carbon fibre reinforced plastic
JIS P 8113:2006 Paper and board -- Determination of tensile properties -- Part 2: Constant rate of elongation method
JIS G 3223:1988 High tensile strength steel forgings for tower flanges
JIS A 1113:2018 Method of test for splitting tensile strength of concrete
JIS P 8135:1976 Testing method of wet tensile breaking strength of paper and paperboard
JIS L 1069 AMD 1:2008 Tensile strength tests of natural fibres (Amendment 1)
JIS G 3474 AMD 1:2011 High tensile strength steel tubes for steel tower (Amendment 1)
JIS G 3474 AMD 1:2016 High strength steel tubes for steel tower (Amendment 1)
JIS K 6376:2009 Light conveyor belts -- Determination of the maximum tensile strength

ZA-SANS, Raman+Peak+Intensity

SANS 16133:2003 Rubber and plastics - Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
SANS 1421:1998 Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break
SANS 6253:2006 Concrete tests - Tensile splitting strength of concrete
SANS 6016:2005 Transverse tensile (internal bond) strength of wood-based panels

RO-ASRO, Raman+Peak+Intensity

STAS 10077-1975 EBONITE Determination of tensile strength
STAS 1298-1989 DRAWN STEEL WIRE FOR STRENGTH ROPES
STAS SR EN 582-1995 Thermal spraying. Determination of tensile adhesive strength
STAS 6834-1975 Tests of metals TENSILE TEST AT LOW TEMPERATURES

IPC - Association Connecting Electronics Industries, Raman+Peak+Intensity

IPC TM-650 3.3A-1975 Crimp Tensile Strength@ Connectors
IPC TM-650 2.4.18B-1980 Tensile Strength and Elongation@ Copper Foil
IPC TM-650 2.4.18.1-1996 Tensile Strength and Elongation@ In-House Plating
IPC TM-650 2.4.18.1A-2004 Tensile Strength and Elongation@ In-House Plating

Taiwan Provincial Standard of the People's Republic of China, Raman+Peak+Intensity

CNS 1278-1981 Method of Test for Tensile Strength of Leather
CNS 5605-1980 Method of Determination for Tensile Strength of Adhesives
CNS 5366-1980 Indirected Test Method for Tensile Strength of Rock
CNS 1011-1983 Method of Test for Tensile Strength of Hydraulic Cement Mortar

Professional Standard - Light Industry, Raman+Peak+Intensity

QB/T 4551-2013 Footwear.Test method for slide fasteners.Slider locking strength
QB/T 4550-2013 Footwear.Test method for slide fasteners.Burst strength

Korean Agency for Technology and Standards (KATS), Raman+Peak+Intensity

KS M ISO 8256:2012 Plastics－Determination of tensile-impact strength
KS E 3032-2006 Method of test for tensile strength of rock
KS E 3032-2021 Method of test for tensile strength of rock
KS E 3032-2006(2016) METHOD OF TEST FOR TENSILE STRENGTH OF ROCK
KS E 3032-1977 Method of test for tensile strength of rock
KS B ISO TR 10108-2003(2018)
KS F 2732-2018 Standard test method for pull-out strength to conclude compressive strength of concrete
KS F 2732-2023 Standard test method for pull-out strength to conclude compressive strength of concrete
KS M 3722-2008 Testing methods for tensile strength of adhesives
KS D 7006-2008 Covered electrodes for high tensile strength steel
KS F 2124-1999
KS D 3777-2018 High tensile strength steel tubes for tower structural purposes
KS M ISO 8256-2012(2017) Plastics－Determination of tensile-impact strength
KS M ISO 8256-2012(2022) Plastics－Determination of tensile-impact strength
KS D 3781-2016(2021) High tensile strength steel for tower structural purposes
KS D 3780-2006(2011) High tensile strength steel tubes for tower structural purposes
KS M 3722-1987 Testing methods for tensile strength of adhesives
KS D 7006-1986 Covered electrodes for high tensile strength steel
KS K 0517-2016 Full thickness tensile strength and elongation for conveyor belts
KS D ISO 14916:2001 Thermal spraying-Determination of tensile adhesive strength
KS L 5104-2012 Testing method for tensile strength of hydraulic cement mortars
KS D ISO 14916:2016 Thermal spraying－Determination of tensile adhesive strength
KS D ISO 14916-2016(2021) Thermal spraying－Determination of tensile adhesive strength
KS L 5104-1986 Testing method for tensile strength of hydraulic cement mortars
KS M 3720-2008 Testing methods for strength properties of adhesives for wood in shear by tension loading
KS M ISO 6922:2012 Adhesives-Determination of tensile strength of butt joints
KS D 4320-1990 High tensile strength steel forgings for tower flanges
KS F 2423-2016 Method of test for splitting tensile strength of concrete
KS M ISO 15754:2022 Paper and board — Determination of z-directional tensile strength
KS K 0763-2015(2022) Test method for geogrid rib tensile strength
KS M ISO 15754:2016 Paper and board－Determination of z-directional tensile strength
KS K 0763-2015(2017) Test method for geogrid rib tensile strength
KS M 3720-1987 Testing methods for strength properties of adhesives for wood in shear by tension loading
KS M ISO 17706:2004 Footwear－Test methods for uppers－Tensile strength and elongation
KS K 0763-2011 Test method for geogrid rib tensile strength
KS M 3734-2011 Testing methods for shear strength of adhesives bonds by tensile loading
KS K 0763-2015 Test method for geogrid rib tensile strength
KS L 5104-2017 Testing method for tensile strength of hydraulic cement mortars
KS M ISO 6922:2008 Adhesives－Determination of tensile strength of butt joints
KS M 3722-2008(2013) Testing methods for tensile strength of adhesives
KS M 3734-1986 Testing methods for shear strength of adhesives bonds by tensile loading
KS F 2382-2008 Testing method for indirect tension test of bituminous mixtures
KS F 2382-2013 Standard test method for indirect tension of asphalt mixtures

HU-MSZT, Raman+Peak+Intensity

European Committee for Standardization (CEN), Raman+Peak+Intensity

EN ISO 8256:1996 Plastics - Determination of Tensile-Impact Strength ISO 8256: 1990, Including Technical Corrigendum 1: 1991
EN ISO 10734:2016 Footwear - Test method for slide fasteners - Strength of slide fastener pullers
EN ISO 10717:2010 Footwear - Test method for slide fasteners - Burst strength (ISO 10717:2010)
EN 13780:2003 Touch and close fasteners - Determination of longitudinal shear strength
EN ISO 10764:2016 Footwear - Test methods for slide fasteners - Lateral strength (ISO 10764:2016)
EN 582:1993 Thermal Spraying - Determination of Tensile Adhesive Strength
prEN 26922-1992 Adhesives; determination of tensile strength of butt joints (ISO 6922:1987)
EN ISO 8256:2004 Plastics - Determination of tensile-impact strength
EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete
EN 17468-1:2022 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 1: Flat sheets
EN ISO 21180:2013 Light conveyor belts - Determination of the maximum tensile strength
prEN 14488-3-2021 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
FprEN 17468-2-2021 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets

RU-GOST R, Raman+Peak+Intensity

GOST 938.11-1969 Leather. Tensile strength test
GOST 11262-1980 Plastics. Tensile strength test method
GOST 29309-1992 Coating of lacquers and paints. Determination of strength under the tension
GOST 30019.4-1993 Textile fastener. Method for determination of separation strength
GOST 21153.3-1985 Rocks. Methods for determination uniaxial tensile strength
GOST 28830-1990 Soldered and brazed joints. Test methods for tension and long-term strength
GOST R 57603-2017 Reinforcing filler. Method for determination of tensile strength and modulus of elasticity
GOST 30436-1996 Paper and board. Determination of tensile properties. Part 2. Constant rate of elongation method
GOST ISO 21180-2015 Light conveyor belts. Determination of the maximum tensile strength
GOST R ISO 3376-2013 Leather. Determination of the tensile strength at break and elongation
GOST R ISO 3781-2016 Paper and board. Determination of tensile strength after immersion in water

(U.S.) Ford Automotive Standards, Raman+Peak+Intensity

FORD FLTM EU BN 001-2-2001 YARN PULL-OUT STRENGTH OF WOVEN FABRICS
FORD FLTM EU BN 003-2-2001 DETERMINATION OF TENSILE STRENGTH AND ELONGATION OF GENUINE LEATHER
FORD FLTM EU BN 003-02-2001 DETERMINATION OF TENSILE STRENGTH AND ELONGATION OF GENUINE LEATHER
FORD FLTM EU BN 017-2-2001 DETERMINATION OF TENSILE STRENGTH OF TRIM MATERIALS AFTER AGEING
FORD ESB-M1A138-A-2002 STEEL WIRE, HARD DRAWN LOW TENSILE QUALITY ***TO BE USED WITH FORD WSS-M99P1111-A***

PK-PSQCA, Raman+Peak+Intensity

PS 151-1961 Method for Determination of Tensile strength and elongation of single yarns.

KR-KS, Raman+Peak+Intensity

KS B ISO TR 10108-2003(2023)
KS D 7006-2018(英文版) Covered electrodes for high tensile strength steel
KS D 3777-2018(2023) High tensile strength steel tubes for tower structural purposes
KS C IEC TS 62607-6-11-2023 Nanomanufacturing — Key control characteristics — Part 6-11: Graphene — Defect density: Raman spectroscopy
KS D ISO 14916-2016 Thermal spraying－Determination of tensile adhesive strength
KS M ISO 15754-2016 Paper and board－Determination of z-directional tensile strength
KS M ISO 15754-2022 Paper and board — Determination of z-directional tensile strength
KS M ISO 15361-2017 Pulps－Determination of zero-span tensile strength, wet or dry
KS M ISO 3781-2017 Paper and board－Determination of tensile strength after immersion in water
KS M ISO 6922-2008 Adhesives－Determination of tensile strength of butt joints

Society of Automotive Engineers (SAE), Raman+Peak+Intensity

SAE AMS2310-1960 TRANSVERSE STRENGTH AND DUCTILITY REQUIREMENTS FOR STEEL Tensile Strength 260,000 psi, min
SAE AMS2310A-1963 TRANSVERSE STRENGTH AND DUCTILITY REQUIREMENTS FOR STEEL Tensile Strength 260,000 psi, min
SAE J935-2002 High-Strength Carbon and Alloy Die Drawn Steels
SAE J935-1990 HIGH STRENGTH CARBON AND ALLOY DIE DRAWN STEELS
SAE J2833-2009 Welded and Cold-Drawn, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending and Flaring
SAE AMS5637D-1981 STEEL BARS, CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30302) Cold Drawn, 125,000 psi (860 MPa) Tensile Strength
SAE AMS5637C-1979 STEEL BARS, CORROSION RESISTANT 18Cr - 8.5Ni (SAE 30302) Cold Drawn, 125,000 psi (862 MPa) Tensile Strength
SAE AMS5636C-1981 STEEL BARS CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30302) Cold Drawn, 100,000 psi (690 MPa) Tensile Strength
SAE AMS3345E-1992 Silicone Rubber 1000 psi (6.90 MPa) Tensile Strength 45 - 55
SAE AMS3346C-1976 SILICONE RUBBER 1000 psi (6.9 MPa) Tensile Strength 55-65
SAE AMS3346D-1983 SILICONE RUBBER 1000 psi (6.90 MPa) Tensile Strength 55 - 65
SAE AMS3345D-2011 SILICONE RUBBER 1000 psi (6.90 MPa) Tensile Strength 45 - 55
SAE AMS3345C-1976 SILICONE RUBBER 1000 psi (6.9 MPa) Tensile Strength 45 - 55
SAE AMS3345E-2001 Silicone Rubber 1000 psi (6.90 MPa) Tensile Strength 45 - 55
SAE AMS6315C-1946 Steel 1.8ni .25mo (0.38 - 0.43c) Heat Treated (105,000 Tensile Strength)
SAE AMS3348-1969 SILICONE RUBBER 1150 psi Tensile Strength, High Resiliency 25 - 35
SAE AMS5315B-1981 DUCTILE (NODULAR) IRON CASTINGS, SAND 60,000 psi (414 MPa) Tensile Strength
SAE AMS3346F-2001 Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer
SAE AMS5315D-1987 Ductile (Nodular) Iron Castings, Sand, 60,000 psi (415 MPa) Tensile Strength, Ferritize Annealed
SAE AMS6374B-2000 Steel Tubing, Seam-Free, Round 0.95Cr 0.20Mo (0.28-0.33C) (SAE 4130) 95.0 ksi (655 MPa) Tensile Strength

VN-TCVN, Raman+Peak+Intensity

TCVN 4635-1988 Artificial leather.Determination of tensile strength and elongation of break

Aerospace Industries Association/ANSI Aerospace Standards, Raman+Peak+Intensity

AIA/NAS NAS 1790-1996 Bolt, 100 Degree Flush Head 160,000 PSI UTS Rev. 4

Professional Standard - Traffic, Raman+Peak+Intensity

JT/T 902-2014 Epoxy-coated high strength wire stay cable

American National Standards Institute （ANSI), Raman+Peak+Intensity

ANSI/TIA/EIA 455-89B-1998 Jacket Elongation and Tensile Strength for Fiber Optic Cable
ANSI/TIA/EIA 455-28-C-1999 Method for Measuring Dynamic Tensile Strength of Optical Fibers
ANSI/TIA-455-89B-1998 Jacket Elongation and Tensile Strength for Fiber Optic Cable
ANSI/TIA-455-28-C-1999 Method for Measuring Dynamic Tensile Strength of Optical Fibers
ANSI/SAE J271-1994 Special Quality High Tensile, Hard Drawn Mechanical Spring Wire and Springs
ANSI/EIA 364-08B:1998 Electric Connectors – Crimp Tensile Strength Test Procedure

BR-ABNT, Raman+Peak+Intensity

ABNT NBR 16912-2020 Texture - Determination of adhesion tensile strength

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Raman+Peak+Intensity

GJB 715.23A-2008 Fastener test methods tensile strength

SAE - SAE International, Raman+Peak+Intensity

SAE J935-1981 HIGH STRENGTH CARBON AND ALLOY DIE DRAWN STEELS
SAE J935-1996 High-Strength Carbon and Alloy Die Drawn Steels
SAE J2833-2018 Welded and Cold-Drawn, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending and Flaring
SAE AMS3345F-2015 Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 45 - 55 Durometer
SAE AMS3346E-1992 Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer
SAE AMS3346D-2013 Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer

Indonesia Standards, Raman+Peak+Intensity

SNI ISO 8256:2014 Plastik - Penentuan kuat tarik impak
SNI 06-4966-1999 Determination of tensile and flexural/compression properties of vulcanized and thermoplastic rubber
SNI 03-4812-1998 Test method for direct tensile strength of concrete
SNI 03-6451-2000 Test methods for tensile strength of hydraulic cement mortars
SNI 0276-2009
SNI 07-6403-2000 Specification for low and medium tensile strength carbon steel plates

GOSTR, Raman+Peak+Intensity

GOST 34250-2017 Plastics. Determination of tensile-impact strength

Professional Standard - Non-ferrous Metal, Raman+Peak+Intensity

YS/T 542-2006 Determination of tensile strength of thermal sprayed coatings
YS/T 1010-2014 Test method for ring tensile strength of sintered porous metal

Military Standard of the People's Republic of China-General Armament Department, Raman+Peak+Intensity

GJB 715.23-1990 Fastener test methods tensile strength
GJB 715.23A-2015 Fastener test methods tensile strength

International Electrotechnical Commission (IEC), Raman+Peak+Intensity

IEC TS 62607-6-11:2022 Nanomanufacturing - Key control characteristics - Part 6-11: Graphene - Defect density: Raman spectroscopy

Professional Standard - Chemical Industry, Raman+Peak+Intensity

HG/T 3849-2008 Ebonite.Determination of tensile strength and elongation at break
HG/T 3868-2008 Vulcanized rubber.Determination of tensile strength and elongation at break in high temperature

TH-TISI, Raman+Peak+Intensity

TIS 1738-1999 Concrete.determination of tensile splitting strength of test specimens

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Raman+Peak+Intensity

GB/T 1452-2018 Test method for flatwise tension strength of sandwich constructions
GB/T 34219-2017 Refractory matericals—Determination of tensile strength at room temperature
GB/T 34220-2017 Refractory Products—Determination of tensile strength at elevated temperature

GM Holden Ltd, Raman+Peak+Intensity

HOLDEN HN 1295-1972 Round, Bright, High Carbon, High Tensile, Hard Drawn Steel Wire

PT-IPQ, Raman+Peak+Intensity

E 156-1964

Professional Standard - Building Materials, Raman+Peak+Intensity

JC/T 777-2004 Test method for tensile strength of preimpregnated roving

AT-ON, Raman+Peak+Intensity

ONORM EN 582-1994 Thermal spraying. Determination of tensile adhesive strength
ONORM A 1114-1984 Testing of paper and board;determination of tensile strength

CH-SNV, Raman+Peak+Intensity

VSM 33715-1968

NL-NEN, Raman+Peak+Intensity

NEN-EN 582-1994 Thermal spraying.Determination of adhesive tensile strength

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Raman+Peak+Intensity

IPC TM-650 2.4.18.3-1995 Tensile Strength, Elongation, and Modulus

IN-BIS, Raman+Peak+Intensity

Lithuanian Standards Office , Raman+Peak+Intensity

LST EN 582-2001 Thermal spraying - Determination of tensile adhesive strength
LST EN ISO 8256:2004 Plastics - Determination of tensile-impact strength (ISO 8256:2004)
LST EN 14488-3-2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens

US-ACEI, Raman+Peak+Intensity

IPC TM-650 2.4.18.1-1997 Tensile Strength and Elongation, In-House Plating

未注明发布机构, Raman+Peak+Intensity

BS EN 582:1994(1999) Thermal spraying — Determination of tensile adhesive strength
BS EN 6129:2016(2017) Aerospace series — Blind bolt, protruding head, high strength, pulltype

Anhui Provincial Standard of the People's Republic of China, Raman+Peak+Intensity

DB34/T 2235-2014 Technical specification for testing the tensile strength of structural concrete by drilling and pulling method

AIA/NAS - Aerospace Industries Association of America Inc., Raman+Peak+Intensity

NAS495-2002 Bolt-Internal Wrenching-Steel (High Tensile and High Fatigue Strength) (Rev 3)
NASM1312-8-1997 Fastener Test Methods; Method 8 Tensile Strength

IT-UNI, Raman+Peak+Intensity

UNSIDER 5-1960

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Raman+Peak+Intensity

IEEE 84-1963 Test Procedure for DETERMINING TENSILE STRENGTH and HARDNESS OF LEAD SHEATHS

IL-SII, Raman+Peak+Intensity

S.I.455-1962 TESTING THE TENSILE STRENGTH OF FIBRES YARNS AND THREADS

GM Daewoo, Raman+Peak+Intensity

GMKOREA EDS-T-7132-2011

Professional Standard - Aviation, Raman+Peak+Intensity

HB 5475-1991 Test method for tensile strength of thermal sprayed coatings
HB 5164-1981 Test method for tensile shear strength of metal bonded joints

Aerospace Industries Association, Raman+Peak+Intensity

AIA NAS 495-2002 Bolt-Internal Wrenching-Steel (High Tensile and High Fatigue Strength) FSC 5306; Rev 3

CEN - European Committee for Standardization, Raman+Peak+Intensity

EN ISO 17706:2018 Footwear - Test methods for uppers - Tensile strength and elongation
EN ISO 21180:2006 Light conveyor belts - Determination of the maximum tensile strength
EN ISO 10750:2018 Footwear - Test method for slide fasteners - Attachment strength of end stops

Standard Association of Australia （SAA）, Raman+Peak+Intensity

AS 1334.3:1982 Methods of testing conveyor and elevator belting - Determination of full thickness tensile strength and elongation of conveyor belting
AS/NZS 4266.6(Int):2001 Reconstituted wood-based panels - Methods of test - Tensile strength perpendicular to the plane of the panel (Internal bond strength)

Professional Standard - Agriculture, Raman+Peak+Intensity

NY/T 2635-2014 Test method for breaking tenacity of ramie fiber

Professional Standard - Electron, Raman+Peak+Intensity

SJ/T 3326-2016 Sealing tensile strength test method for ceramic-metal
SJ/T 3326-2001 Test method used in tensile strength of ceramic to metal seal

Professional Standard - Machinery, Raman+Peak+Intensity

JB/T 9141.2-1999 Test method for tensile strength of flexible graphite sheets

(U.S.) Telecommunications Industries Association , Raman+Peak+Intensity

TIA-455-89-B-1998 FOTP-89 Optical Fiber Cable Jacket Elongation and Tensile Strength

PH-BPS, Raman+Peak+Intensity

PTS 155-1972 Method of Test for Tensile Bneaking strength of Paper and Board

NO-SN, Raman+Peak+Intensity

NS 3674-1987 Concrete testing - Hardened concrete - Tensile strength

Professional Standard - Coal, Raman+Peak+Intensity

MT/T 47-1987 Method for determination of unidirectional tensile strength of coal and rock
MT 47-1987 Method for determination of unidirectional tensile strength of coal and rock

National Metrological Technical Specifications of the People's Republic of China, Raman+Peak+Intensity

JJF(机械) 1039-2020 Calibration specification for molding sand hot-wet tensile strength tester
JJF(机械)1039-2020 Calibration specification for molding sand hot-wet tensile strength tester

Professional Standard - Military and Civilian Products, Raman+Peak+Intensity

WJ 744-1994 Test method for tensile strength of adhesives for optical instruments

Yunnan Provincial Standard of the People's Republic of China, Raman+Peak+Intensity

DB53/T 644-2014 Determination of Tensile Strength of Tobacco Leaf by Constant Speed Tensile Method

Professional Standard - Water Conservancy, Raman+Peak+Intensity

SL 237-031-1999 Code for test of soil - uniaxial tensile strength test

Institute of Electrical and Electronics Engineers (IEEE), Raman+Peak+Intensity

IEEE Std 84-1963 IEEE Test Procedure for Determining Tensile Strength and Hardness of Lead Sheaths

BE-NBN, Raman+Peak+Intensity

NBN T 46-001-1977 Flexible cellular materials - Determination of tensile strength and elongation at break
NBN I-895-1968

Professional Standard - Forestry, Raman+Peak+Intensity

LY/T 1410-1999 Laminated wood plastics.Compreg Determination of tension strength parallel to face grain