ZH
RU
ES

Standard samples for thermogravimetric testing

Standard samples for thermogravimetric testing, Total:500 items.

In the international standard classification, Standard samples for thermogravimetric testing involves: Test conditions and procedures in general, Thermodynamics and temperature measurements, Mechanical testing, Construction materials, Analytical chemistry, Soil quality. Pedology, Kitchen equipment, Measurement of volume, mass, density, viscosity, Leather technology, Paint ingredients, Equipment for entertainment, Surface treatment and coating, Raw materials for rubber and plastics, Materials for the reinforcement of composites, Edible oils and fats. Oilseeds, PAINT AND COLOUR INDUSTRIES, Insulating materials, Fuels, Plastics, Rubber and plastics products, Equipment for the metallurgical industry, Paints and varnishes, Road vehicles in general, Production of metals, Acoustics and acoustic measurements, Inorganic chemicals, Textile fibres, Fertilizers, Petroleum products in general, Road engineering, Refractories, Coals, Rubber, Waxes, bituminous materials and other petroleum products, Water quality, Lubricants, industrial oils and related products, Air quality, Electrical wires and cables, Earthworks. Excavations. Foundation construction. Underground works, Pipeline components and pipelines, Ferroalloys, Protection against fire, Pumps, Crude petroleum, Linear and angular measurements, Pulps, Pesticides and other agrochemicals, CHEMICAL TECHNOLOGY, Fluid storage devices, Refrigerating technology, Domestic, commercial and industrial heating appliances, Ceramics, Buildings, Products of the textile industry, Adhesives.

American Society for Testing and Materials (ASTM), Standard samples for thermogravimetric testing

ASTM E2040-19 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E1582-17 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM E1253-21 Standard Guide for Reconstitution of Charpy-Sized Specimens
ASTM E2550-07 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E2550-11 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E2550-21 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E2008-17 Standard Test Methods for Volatility Rate by Thermogravimetry
ASTM E2550-17 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM C163-05 Standard Practice for Mixing Thermal Insulating Cement Samples
ASTM E2008-17(2021) Standard Test Methods for Volatility Rate by Thermogravimetry
ASTM E1868-10(2021) Standard Test Methods for Loss-On-Drying by Thermogravimetry
ASTM C1799/C1799M-19 Standard Guide to Dimension Stone Test Specimen Sampling and Preparation
ASTM E1157-87(2018)e1 Standard Specification for Sampling and Testing of Reusable Laboratory Glassware
ASTM D7263-09 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM E1582-21 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM E1253-13 Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens
ASTM D7263-09(2018)e2 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM D7263-09(2018) Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM D7263-09(2018)e1 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM E1868-97 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E2008-07 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E2008-08 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E1868-09 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E1868-10 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E1868-10(2015) Standard Test Methods for Loss-On-Drying by Thermogravimetry
ASTM E1582-04 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM E1582-14 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM E1582-10 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM D7263-21 Standard Test Methods for Laboratory Determination of Density and Unit Weight of Soil Specimens
ASTM C1607-06 Standard Test Method for Determination of "Microwave Safe for Reheating" for Ceramicware
ASTM E2008-99 Standard Test Method for Volatility Rate by Thermogravimetry
A-A-59410A-2015 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54409 NOT 1-2012 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-59163A-2010 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1868-02 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E1868-04 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E1641-99 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54409-1991 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-55281-1995 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-55220-1995 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54923-1993 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A 59377B-2016 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1582-00 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM D1813-13(2017) Standard Test Method for Measuring Thickness of Leather Test Specimens
ASTM D153-84(1996)e1 Standard Test Methods for Specific Gravity of Pigments
ASTM D153-84(2008) Standard Test Methods for Specific Gravity of Pigments
ASTM D153-84(2020) Standard Test Methods for Specific Gravity of Pigments
ASTM F1932/F1932M-98(2018) Standard Test Method for Measuring Sleeping Bag Loft
ASTM C191-99 Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle
ASTM C191-01a Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle
ASTM C1919-22 Standard Practice for Measurement of the Steady-State Thermal Transmission Properties of Small Specimens Using the Heat Flow Meter Apparatus
ASTM C1607-12 Standard Test Method for Determination of ldquo;Microwave Safe for Reheatingrdquo; for Ceramicware
ASTM E2040-99 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-03 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-08 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-08(2014) Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM A630-98 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM E1641-04 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E2008-04 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E2008-06 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM A630-03(2014) Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM A630-16 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM D8474-23 Standard Test Method for Recovered Carbon Black (rCB)—Compositional Analysis by Thermogravimetry (TGA)
ASTM C1872-18e1 Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement
ASTM C1872-18 Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement
ASTM C1872-18e2 Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement
ASTM D233-02 Standard Test Methods of Sampling and Testing Turpentine
ASTM D233-08 Standard Test Methods of Sampling and Testing Turpentine
ASTM D233-12 Standard Test Methods of Sampling and Testing Turpentine
ASTM D7775-21 Standard Guide for Measurements on Small Graphite Specimens
ASTM D802-97 Standard Test Methods for Sampling and Testing Pine Oils
ASTM D802-02 Standard Test Methods for Sampling and Testing Pine Oils
ASTM C1019-07 Standard Test Method for Sampling and Testing Grout
ASTM D802-02(2009) Standard Test Methods for Sampling and Testing Pine Oils
ASTM D802-02(2017) Standard Test Methods for Sampling and Testing Pine Oils
ASTM D802-02(2013) Standard Test Methods for Sampling and Testing Pine Oils
ASTM D233-13 Standard Test Methods of Sampling and Testing Turpentine
ASTM C1019-13 Standard Test Method for Sampling and Testing Grout
ASTM D2347-00(2021) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D2347-00(2010) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D2347-00(2015) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D1234-85(1995) Standard Test Method of Sampling and Testing Staple Length of Grease Wool
ASTM D233-13(2017) Standard Test Methods of Sampling and Testing Turpentine
ASTM D5368-93 Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
ASTM D3394-16 Standard Test Methods for Sampling and Testing Electrical Insulating Board
ASTM E2008-08(2014)e1 Standard Test Methods for Volatility Rate by Thermogravimetry
ASTM D2347-00 Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D2347-00(2005) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D1813-00(2005) Standard Test Method for Measuring Thickness of Leather Test Specimens
ASTM D1813-00 Standard Test Method for Measuring Thickness of Leather Test Specimens
ASTM D801-02(2009) Standard Test Methods for Sampling and Testing Dipentene
ASTM D1813-00(2010) Standard Test Method for Measuring Thickness of Leather Test Specimens
ASTM D801-02(2017) Standard Test Methods for Sampling and Testing Dipentene
ASTM D1813-13(2023) Standard Test Method for Measuring Thickness of Leather Test Specimens
ASTM D1813-13 Standard Test Method for Measuring Thickness of Leather Test Specimens
ASTM D801-02(2013) Standard Test Methods for Sampling and Testing Dipentene
ASTM C1140/C1140M-11(2019) Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
ASTM D3850-94(2000) Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM D3850-94(2006) Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM D3850-12 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM D4001-93(1999) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM E2403-23 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM D3012-00 Standard Test Method for Thermal-Oxidative Stability of Propylene Plastics Using a Specimen Rotator Within an Oven
ASTM D1896/D1896M-10 Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds
ASTM D5224-12 Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
ASTM D5965-02 Standard Test Methods for Specific Gravity of Coating Powders
ASTM D5965-96 Standard Test Methods for Specific Gravity of Coating Powders
ASTM D5965-02(2013) Standard Test Methods for Specific Gravity of Coating Powders
ASTM E458-08(2020) Standard Test Method for Heat of Ablation
ASTM D3012-19 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
ASTM D1896-99 Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds
ASTM D1896-99(2004) Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds
ASTM D6559-00A(2016)e1 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
ASTM D1188-07 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM D1188-07(2015) Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM E795-05(2012) Standard Practices for Mounting Test Specimens During Sound Absorption Tests
ASTM E1131-08 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM D5083-17 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM E2402-05 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM D6559-00a(2005) Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
ASTM D6559-00a(2010) Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
ASTM E2958-19 Standard Test Methods for Kinetic Parameters by Factor Jump/Modulated Thermogravimetry
ASTM E2402-11 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM C561-91(2010)e1 Standard Test Method for Ash in a Graphite Sample
ASTM D4427-92(2007) Standard Classification of Peat Samples by Laboratory Testing
ASTM C562-91(2010)e1 Standard Test Method for Moisture in a Graphite Sample
ASTM D509-70(1987) Standard Test Methods of Sampling and Grading Rosin
ASTM D4427-92(1997) Standard Classification of Peat Samples by Laboratory Testing
ASTM D1441-12(2020) Standard Practice for Sampling Cotton Fibers for Testing
ASTM D4427-13(2017) Standard Classification of Peat Samples by Laboratory Testing
ASTM D4427-18 Standard Classification of Peat Samples by Laboratory Testing
ASTM D509-20 Standard Test Methods of Sampling and Grading Rosin
ASTM C561-16 Standard Test Method for Ash in a Graphite Sample
ASTM C42/C42M-10 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
ASTM E3142-18a(2023) Standard Test Method for Thermal Lag of Thermal Analysis Apparatus
ASTM D1045-19 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
ASTM E2403-06(2018) Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E2958-14 Standard Test Methods for Kinetic Parameters by Factor Jump/Modulated Thermogravimetry
ASTM E1157-87(1996) Standard Specification for Sampling and Testing of Reusable Laboratory Glassware
ASTM E1157-87(2011) Standard Specification for Sampling and Testing of Reusable Laboratory Glassware
ASTM D189-06e1 Standard Test Method for Conradson Carbon Residue of Petroleum Products
ASTM D1896-09 Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds
ASTM E955-88(1996) Standard Test Method for Thermal Characteristics of Refuse-Derived Fuel Macrosamples
ASTM D1896/D1896M-10(2017) Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds
ASTM D1188-07e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM D6370-23 Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)
ASTM C67/C67M-23a Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM D7582-10e1 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM E1641-07 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1131-20 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E1641-07(2012) Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM D6370-99(2003) Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)
ASTM E2402-11(2017) Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E2402-19 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E1641-18 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM D6988-08 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
ASTM D2726-10 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D1071-83(2008) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D6988-13 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
ASTM D6988-21 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
ASTM D480-88(2003) Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
ASTM D480-88(2020) Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
ASTM D480-88(2014) Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
ASTM D1071-83(1998) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-83(1998)e1 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-17 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D3977-97(2019) Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM C419-94(2000) Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
ASTM C419-94 Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
ASTM C419-20 Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
ASTM C419-08 Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
ASTM D1188/D1188M-22 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Coated Samples
ASTM D6375-99a Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6375-05 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6375-09(2019) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6375-09(2014) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer 40;TGA41; Noack Method
ASTM E1641-23 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM D1188-96e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM D1188-96(2002) Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM D1188-96(2002)e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM E1644-04 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM D3641-97 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ASTM D3641-02 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ASTM C419-08(2013) Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
ASTM D3641-15 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ASTM F205-94(2020) Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM D5355-95(2006) Standard Test Method for Specific Gravity of Oils and Liquid Fats
ASTM D5355-95(2001) Standard Test Method for Specific Gravity of Oils and Liquid Fats
ASTM D5355-95 Standard Test Method for Specific Gravity of Oils and Liquid Fats
ASTM C97-02 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
ASTM C97/C97M-18 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
ASTM C97/C97M-15 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
ASTM E2403-04 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E2403-06 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM D6558-22 Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
ASTM D6559-22 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
ASTM E2403-06(2012) Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM D4703-02 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
ASTM D3142/D3142M-17 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
ASTM C1704/C1704M-09a Standard Test Method for Sampling and Testing Structural Cementitious Panels
ASTM D854-10 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D2688-05 Standard Test Methods for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Methods)
ASTM C771-14(2019) Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
ASTM D6370-99(2014) Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)
ASTM D2444-99 Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
ASTM A610-79(2000) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
ASTM A610-79(2019) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
ASTM D3964-04 Standard Practice for Selection of Coating Specimens for Appearance Measurements
ASTM D4797-12a Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking
ASTM D4797-17(2022) Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Pavement Marking
ASTM D4797-17 Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Pavement Marking
ASTM D4797-12 Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking
ASTM E2405-05 Standard Test Method for Determination of Fire and Thermal Parameters of Materials Using an Intermediate Scale Test with Vertically Oriented Specimen
ASTM C1616-07e1 Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
ASTM C1616-07 Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
ASTM E295-82(2000) Standard Test Method for Measured Speed of Oil Diffusion Pumps
ASTM E2958-21 Standard Test Methods for Kinetic Parameters by Factor Jump/Modulated Thermogravimetry
ASTM D3641-10 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ASTM D5224-00(2006) Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
ASTM D7314-10 Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling
ASTM E2744-16e1 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM D3012-04 Standard Test Method for Thermal-Oxidative Stability of Propylene Plastics Using a Specimen Rotator Within an Oven
ASTM D3012-07 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
ASTM D6988-07 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
ASTM E2749-15a(2019) Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
ASTM D854-00 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D854-00e1 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D854-02 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D5550-23 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D7314-21 Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling
ASTM D7314-10(2015) Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling
ASTM D7314-08 Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling
ASTM D6925-03 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D3850-19 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM D5224-00 Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
ASTM D3419-00(2006) Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
ASTM D3419-00 Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
ASTM D3419-93 Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
ASTM D5224-12(2019) Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
ASTM D341-09(2015) Standard Practice for Viscosity-Temperature Charts for Liquid Petroleum Products
ASTM D7582-09 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM D6558-00A(2015)e1 Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
ASTM D6822-12b(2017)e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM B137-95(2004) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM D2756-02 Standard Test Method for Weight Loss of Electrical Insulating Varnishes
ASTM E252-84(1999) Standard Test Method for Thickness of Thin Foil and Film by Weighing
ASTM F1934-98(2018) Standard Test Method for Weighing a Backpacking or Mountaineering Tent
ASTM G210-13(2018) Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus
ASTM E422-05(2016) Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
ASTM D5147-02 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
ASTM D5147-02a Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
ASTM D3376-88(2005) Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
ASTM D3376-18 Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
ASTM C771-97 Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
ASTM C771-03 Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
ASTM C771-14 Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
ASTM E1131-08(2014) Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E1131-03 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM D1509-95(2007) Standard Test Methods for Carbon Black-Heating Loss
ASTM E2043-99(2021) Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM E2043-99(2017) Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM E2043-99(2012) Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM D3964-80(1998) Standard Practice for Selection of Coating Specimens for Appearance Measurements
ASTM D3964-10(2020) Standard Practice for Selection of Coating Specimens for Appearance Measurements
ASTM D3641-10a Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ASTM D3641-12 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ASTM D3641-14 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ASTM D5083-10 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM E457-08(2020) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM C1774-13 Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems
ASTM C140/C140M-23 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
ASTM E1644-04(2012)e1 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM C604-18(2023) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D3179-89(2002) Standard Test Methods for Nitrogen in the Analysis Sample of Coal and Coke
ASTM D3179-89(1997) Standard Test Methods for Nitrogen in the Analysis Sample of Coal and Coke
ASTM D3179-89(1997)e1 Standard Test Methods for Nitrogen in the Analysis Sample of Coal and Coke
ASTM D6988-03 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
ASTM D3179-02 Standard Test Methods for Nitrogen in the Analysis Sample of Coal and Coke
ASTM D4427-07 Standard Classification of Peat Samples by Laboratory Testing
ASTM E1197-87(2004) Standard Guide for Conducting a Terrestrial Soil-Core Microcosm Test
ASTM C702/C702M-18 Standard Practice for Reducing Samples of Aggregate to Testing Size
ASTM D5832-98(2021) Standard Test Method for Volatile Matter Content of Activated Carbon Samples
ASTM D3179-02e1 Standard Test Methods for Nitrogen in the Analysis Sample of Coal and Coke
ASTM D3977-97(2013)e1 Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM C183/C183M-23 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
ASTM D3142-05 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
ASTM A610-79(2004) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
ASTM D202-97(2002)e1 Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
ASTM A610-79(2009) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
ASTM D202-08 Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
ASTM F3058-16(2021) Standard Practice for Preliminary Field Testing of Thermoplastic Pipe Joints for Gravity Flow (Non-Pressure) Sewer Lines
ASTM E2206-11 Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E2206-21 Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM D3012-13 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
ASTM E126-19 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM E2551-18 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E2551-20 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E2817-11(2018) Standard Test Method for Test Fueling Masonry Heaters
ASTM E2817-11 Standard Test Method for Test Fueling Masonry Heaters
ASTM D2247-68(1973) Standard Method for Testing Coated Metal Specimens At 100% Relative Humidity
ASTM C67-13a Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM E1805-07 Standard Test Method for Fire Assay Determination of Gold in Copper Concentrates by Gravimetry
ASTM A630-16a Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM F205-94(2015) Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM A630-16ae1 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM D6370-99(2009) Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)
ASTM D6370-99 Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)
ASTM D5420-16 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM E2043-99(2006) Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM E2043-99 Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM D4832/D4832M-23 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Cylindrical Test Specimens
ASTM D5083-10e1 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM C604-02(2007) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM C604-02 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM C604-98 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D4892-89(2004) Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM C604-02(2007)e1 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D1217-93(1998) Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D1217-20 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D4892-89(2009) Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM E778-87(2004) Standard Test Methods for Nitrogen in the Analysis Sample of Refuse-Derived Fuel
ASTM E778-87(1996) Standard Test Methods for Nitrogen in the Analysis Sample of Refuse-Derived Fuel
ASTM E2749-10(2014) Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
ASTM E2749-15 Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
ASTM E2749-15a Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
ASTM C1470-06 Standard Guide for Testing the Thermal Properties of Advanced Ceramics
ASTM C1470-00 Standard Guide for Testing the Thermal Properties of Advanced Ceramics
ASTM D1573-95(2004) Standard Test Method for Heat Aging of Asbestos Textiles
ASTM F2141-07(2019) Standard Test Method for Performance of Self-Serve Hot Deli Cases
ASTM F2142-01(2019) Standard Test Method for Performance of Drawer Warmers
ASTM F2473-12(2023) Standard Test Method for Performance of Water-Bath Rethermalizers
ASTM C1470-06(2013) Standard Guide for Testing the Thermal Properties of Advanced Ceramics
ASTM D1573-95(2004)e1 Standard Test Method for Heat Aging of Asbestos Textiles
ASTM D7229-06 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D7229-08 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D5083-02 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D5083-96 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D5083-08 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D7140-05 Standard Test Method to Measure Heat Transfer Through Textile Thermal Barrier Materials
ASTM E422-99 Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
ASTM E422-05 Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
ASTM D4499-07(2015) Standard Test Method for Heat Stability of Hot-Melt Adhesives
ASTM D7750-12(2017) Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
ASTM E2749-10 Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
ASTM D2688-94(1999)e1 Standard Test Methods for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Methods)
ASTM D2688-15e1 Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)
ASTM D2688-15 Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)
ASTM D3178-89(1997) Standard Test Methods for Carbon and Hydrogen in the Analysis Sample of Coal and Coke
ASTM A610-79(2014) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
ASTM D2813-97 Standard Practice for Sampling Leather for Physical and Chemical Tests
ASTM D6717-01 Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
ASTM D2813-03(2021) Standard Practice for Sampling Leather for Physical and Chemical Tests
ASTM D3173-87(1996) Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
ASTM D3173/D3173M-17 Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
ASTM D3173-73 Standard Test Method for Moisture In The Analysis Sample Of Coal And Coke
ASTM D3173/D3173M-17a Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
ASTM D8255-19 Standard Guide for Work of Fracture Measurements on Small Nuclear Graphite Specimens
ASTM D3964-10(2015) Standard Practice for Selection of Coating Specimens for Appearance Measurements
ASTM D4427-13 Standard Classification of Peat Samples by Laboratory Testing
ASTM D4703-00 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
ASTM D4703-93 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
ASTM D4703-07 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets

AASHTO - American Association of State Highway and Transportation Officials, Standard samples for thermogravimetric testing

T 166-2005 Standard Method of Test for Bulk Specific Gravity of Compacted Hot-Mix Asphalt Using Saturated Surface-Dry Specimens
T 275-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Paraffin-Coated Specimens
T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2011 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 32-1994 Standard Method of Test for Sampling and Testing Brick
T 32-2008 Standard Method of Test for Sampling and Testing Brick
T 32-2010 Standard Method of Test for Sampling and Testing Brick
T 32-2000 Standard Method of Test for Sampling and Testing Brick
T 32-2005 Standard Method of Test for Sampling and Testing Brick
T2-1991 Standard Method of Test for Sampling of Aggregates
T 32-1996 Standard Specification for Sampling and Testing Brick
T 32-1998 Standard Specification for Sampling and Testing Brick
T 100-2014 Standard Method of Test for Specific Gravity of Soils
T 100-2006 Standard Method of Test for Specific Gravity of Soils
T 209-2009 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)
T 209-2008 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)
T 209-2011 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)
T 209-2010 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)
R 47-2014 Standard Practice for Reducing Samples of Hot Mix Asphalt (HMA) to Testing Size
R 47-2008 Standard Recommended Practice for Reducing Samples of Hot Mix Asphalt (HMA) to Testing Size
T60-1984 Standard Method of Test for Sampling and Testing Wood Preservatives
T 127-2004 Standard Method of Test for Sampling and Amount of Testing of Hydraulic Cement
T 127-2011 Standard Method of Test for Sampling and Amount of Testing of Hydraulic Cement
T 127-2015 Standard Method of Test for Sampling and Amount of Testing of Hydraulic Cement
T 328-2005 Standard Method of Test for Reducing Samples of Hot-Mix Asphalt to Testing Size
TP10-1993 Standard Test Method for Thermal Stress Restrained Specimen Tensile Strength (2000 Edition)
T 295-2008 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
T 295-2013 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
T 295-2007 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
T100-1993 Standard Method of Test for Specific Gravity of Soils (ASTM D854-83)
T 248-2014 Standard Method of Test for Reducing Samples of Aggregate to Testing Size
T 248-2002 Standard Method of Test for Reducing Samples of Aggregate to Testing Size
T 248-2011 Standard Method of Test for Reducing Samples of Aggregate to Testing Size
T 312-2003 Standard Method of Test for Preparing and Determining the Density of Hot-Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
T 312-2012 Standard Method of Test for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
T 312-2004 Standard Method of Test for Preparing and Determining the Density of Hot-Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
T 312-2008 Standard Method of Test for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
T 312-2011 Standard Method of Test for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
T 209-2012 Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Hot Mix Asphalt (HMA)
T 209-2005 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot-Mix Asphalt Paving Mixtures
PP3-1994 Standard Practice for Preparing Hot Mix Asphalt (HMA) Specimens by Means of the Rolling Wheel Compactor
T 32-2004 Standard Method of Test for Sampling and Testing Brick (ASTM Designation: C 67-02c)
T 32-2003 Standard Method of Test for Sampling and Testing Brick (ASTM Designation: C 67-02a)
T 275-1991 Standard Method of Tests for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens (HM-22; PART IIB)
T 166-2000 Standard Method of Test for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens (Twentieth Edition)
TP4-1997 Standard Method for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the SHRP Gyratory Compactor
TP4-1999 Standard Method for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the SHRP Gyratory Compactor
T 84-2009 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
T 84-2000 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
T 84-2010 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
T 84-2013 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
T 84-2008 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
T 228-2009 Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials
T 228-2006 Standard Method of Test for Specific Gravity of Semi-Solid Bituminous Materials
T 143-2013 Standard Method of Test for Sampling and Testing Calcium Chloride for Roads and Structural Applications
T 143-2004 Standard Method of Test for Sampling and Testing Calcium Chloride for Roads and Structural Applications
T143-1991 Standard Method of Test for Sampling and Testing Calcium Chloride for Roads and Structural Applications
R 71-2016 Standard Practice for Sampling and Amount of Testing of Hydraulic Cement
HM-28-2008 Standard Specifications for Transportation Materials and Methods of Sampling and Testing
TP 108-2014 Standard Method of Test for Determining the Abrasion Loss of Asphalt Mixture Specimens
T 100-2003 Standard Method of Test for Specific Gravity of Soils (ASTM Designation: D 854-00)
T 295-1992 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method (ASTM D3142-84 (R 1989))
HM-17 PT II TOC-1995 Standard Specifications for Transportation Materials and Methods of Sampling and Testing Part II Tests
T264-1978 Standard Method of Test for Collection and Preservation of Water Samples (Eighteenth Edition)

The American Road & Transportation Builders Association, Standard samples for thermogravimetric testing

AASHTO T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2016 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 32-2010 Standard Method of Test for Sampling and Testing Brick
AASHTO T 100-2014 Standard Method of Test for Specific Gravity of Soils
AASHTO T 100-2015 Standard Method of Test for Specific Gravity of Soils
AASHTO T 209-2010 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)
AASHTO T 209-2011 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)
AASHTO R 47-2014 Standard Practice for Reducing Samples of Hot Mix Asphalt (HMA) to Testing Size
AASHTO T 127-2015 Standard Method of Test for Sampling and Amount of Testing of Hydraulic Cement
AASHTO T 243M_T 243-2007 Standard Method of Test for Sampling Procedure for Impact Testing of Structural Steel
AASHTO T 295-2013 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
AASHTO T 248-2014 Standard Method of Test for Reducing Samples of Aggregate to Testing Size
AASHTO T 312-2012 Standard Method of Test for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
AASHTO T 209-2012 Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Hot Mix Asphalt (HMA)
AASHTO T 166-2021 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens
AASHTO T 295-2007 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
AASHTO T 275-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Paraffin-Coated Specimens
AASHTO T166-2000 Standard Method of Test for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens Twentieth Edition R(1998)
AASHTO T 84-2010 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
AASHTO T 84-2013 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
AASHTO T 143-2013 Standard Method of Test for Sampling and Testing Calcium Chloride for Roads and Structural Applications
AASHTO R 71-2016 Standard Practice for Sampling and Amount of Testing of Hydraulic Cement
AASHTO T 209-2008 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)
AASHTO TP 108-2014 Standard Method of Test for Determining the Abrasion Loss of Asphalt Mixture Specimens
AASHTO T 85-2008 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
AASHTO T 275-1991 Standard Method of Tests for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens HM-22; PART IIB R(2000)
AASHTO T 243M/T 243-2008 Standard Method of Test for Sampling Procedure for Impact Testing of Structural Steel

Korean Agency for Technology and Standards (KATS), Standard samples for thermogravimetric testing

KS B 5296-2005 Standard weights for testing of high capacity weighing machines
KS B 5296-1987 Standard weights for testing of high capacity weighing machines
KS F 2440-2014 Standard test method of sampling and testing concrete masonry units
KS F 2446-2020 Standard test method for bulk specific gravity and density of compacted bituminous mixtures using saturated surface dry specimens
KS L 5121-2017 Standard testing method for heat of hydration of hydraulic cement

RU-GOST R, Standard samples for thermogravimetric testing

GOST R 54262-2010 Resources saving. Waste management and energy production. Standard test method for thermal characteristic of refused derived fuel macrosamples

UY-UNIT, Standard samples for thermogravimetric testing

NORMA 25-1948

ES-UNE, Standard samples for thermogravimetric testing

UNE-EN ISO 294-5:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)

British Standards Institution (BSI), Standard samples for thermogravimetric testing

BS EN ISO 294-5:2017 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS EN ISO 294-5:2013 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS ISO 294-5:2011 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy

German Institute for Standardization, Standard samples for thermogravimetric testing

DIN 53235-2:2005-06 Testing of pigments - Tests on specimens having standard depth of shade - Part 2: Adjustment of specimens to standard depth of shade
DIN EN ISO 294-5:2018-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017); German version EN ISO 294-5:2017
DIN 53235-1:2005-06 Testing of pigments - Tests on specimens having standard depth of shade - Part 1: Standard depths of shade
DIN 53470:1951 Testing of Compression Moulding Materials; Compression Mould for the Production of Standard Specimens of Thermosetting Compression Moulding Materials

PT-IPQ, Standard samples for thermogravimetric testing

NP 706-1984

American National Standards Institute （ANSI), Standard samples for thermogravimetric testing

ANSI/ASTM C561:2016 Standard Test Method for Ash in a Graphite Sample
ASTM D2070-23 Standard Test Method for Thermal Stability of Hydraulic Oils

Canadian Standards Association (CSA), Standard samples for thermogravimetric testing

CSA A82.4/.5/.6-M1978-1978 Structural Clay Load-Bearing Wall Tile/Structural Clay Non-Load Bearing Wall Tile/Standard Methods for Sampling and Testing Structural Clay Tile R(1998)

未注明发布机构, Standard samples for thermogravimetric testing

BS EN ISO 294-5:2017(2018) Plastics - Injection moulding of test specimens of thermoplastic materials Part 5 : Preparation of standard specimens for investigating anisotropy

VE-FONDONORMA, Standard samples for thermogravimetric testing

NORVEN 55-2-1960

Japanese Industrial Standards Committee (JISC), Standard samples for thermogravimetric testing

JIS K 7152-5:2007 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy

European Committee for Standardization (CEN), Standard samples for thermogravimetric testing

prEN ISO 294-5 rev Plastics — Injection moulding of test specimens of thermoplastic materials — Part 5: Preparation of standard specimens for investigating anisotropy
EN ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy

International Organization for Standardization (ISO), Standard samples for thermogravimetric testing

ISO 294-5:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
ISO 294-5:2011 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
ISO 5737:1983 Prints; Preparation of standard prints for optical tests

Association Francaise de Normalisation, Standard samples for thermogravimetric testing

NF T51-294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: preparation of standard specimens for investigating anisotropy
NF T51-294-5*NF EN ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5 : preparation of standard specimens for investigating anisotropy

Danish Standards Foundation, Standard samples for thermogravimetric testing

DS/EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Standard samples for thermogravimetric testing

GB/T 6598-1986 Determination of weight-average molecular weight of polystyrene standards by low angle laser light scattering method
GB 6598-1986 Determination of Weight Average Molecular Weight of Polystyrene Standard Samples by Small Angle Laser Light Scattering Method

WRC - Welding Research Council, Standard samples for thermogravimetric testing

BULLETIN 257-1980 ANALYSIS OF THE ULTRASONIC EXAMINATIONS OF PVRC WELD SPECIMENS 155@ 202@ AND 203 BY STANDARD AND TWO-POINT COINCIDENCE METHODS

国家市场监督管理总局、中国国家标准化管理委员会, Standard samples for thermogravimetric testing

GB/T 17037.5-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy

Malaysia Standards, Standard samples for thermogravimetric testing

MS 1443-1998

Standard Association of Australia （SAA）, Standard samples for thermogravimetric testing

AS 1289.6.1.1:2014 Methods of testing soils for engineering purposes, Method 6.1.1: Soil strength and consolidation tests — Determination of the California Bearing Ratio of a soil — Standard laboratory method for a remoulded specimen
AS 1289.1.3.1:1999 Methods of testing soils for engineering purposes - Sampling and preparation of soils - Undisturbed samples - Standard method

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Standard samples for thermogravimetric testing

JEDEC JESD203-2005 Standard Test Loads For Dual - Supply Level Translation Devices

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), Standard samples for thermogravimetric testing

AHRI IWH-TS-1-2003 PERFORMANCE OF INDIRECT-FIRED WATER HEATERS - TESTING STANDARD

PL-PKN, Standard samples for thermogravimetric testing

PN C99460-00-1985 Sampling of photographic lig sensitive materials for testing Introduction and scope of the standard