ZH
RU
ES
metallographic instrument
metallographic instrument, Total:500 items.
In the international standard classification, metallographic instrument involves: Surface treatment and coating, Corrosion of metals, Testing of metals, Powder metallurgy, Non-ferrous metals, Finances. Banking. Monetary systems. Insurance, Optics and optical measurements, Power stations in general, Lamps and related equipment, On-board equipment and instruments, Equipment for processing of minerals, Heat treatment, Linear and angular measurements, Paint ingredients, Road vehicle systems, Fasteners, Switchgear and controlgear, Production of metals, Metrology and measurement in general, Mechanical testing, Measurement of volume, mass, density, viscosity, Analytical chemistry, Construction of waterways and ports, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Jewellery, Non-destructive testing, Mining equipment, Shipbuilding and marine structures in general, Vocabularies, Iron and steel products, Welding, brazing and soldering, Occupational safety. Industrial hygiene, Water quality, Dentistry, Rubber and plastics products, Particle size analysis. Sieving, Ferroalloys, Medical equipment, TESTING, Materials for aerospace construction, Valves, Petroleum, petroleum products and natural gas handling equipment, Lubricants, industrial oils and related products, Aircraft and space vehicles in general, Elements of buildings, Petroleum products in general, Capacitors, Construction materials, Fluid storage devices, Products of non-ferrous metals, Ferrous metals, Products of the chemical industry.
CZ-CSN, metallographic instrument
- CSN 03 8137-1989 Corrosion prevention. Metals, alloys and metal coatings. Metallographic examination of corrosion failure of metals
- CSN 03 8137-1969 Metallographic examination of corrosion failure of metals
- CSN 42 0471-1984 Metallographic determination of nonmetallic inclusions in steel
- CSN 25 0252-1964 Calibration of machines for creep testing of metals.
- CSN 42 0624-1987 Chemical analysis of non-ferrous metals and alloys. Nonferrous metals and alloys. Determination of sulphur by automatic analyzers
- CSN ISO 2064:1992 Metallic and olher non-organic coatings. Definitions and conventions concerning the measurement of thickness
- CSN ISO 4492:1993 Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
- CSN ISO 4518:1994 Metallic coatings. Measurement of coating thickness. Profilometric method
- CSN 03 8153-1980 Corrosion of metals. Metallic and non-metallic inorganic coatings on alloys of iron. Methods for determination of degree of rust penetration through tne coating
- CSN 16 2351-1982 Metal bottles
U.S. Air Force, metallographic instrument
IN-BIS, metallographic instrument
Korean Agency for Technology and Standards (KATS), metallographic instrument
- KS D ISO TR 14321:2011 Sintered metal materials, excluding hardmetals-Metallographic preparation and examination
- KS X ISO 10962:2006 Securities and related financial instruments－Classification of Financial Instruments(CFI code)
- KS B 5551-2004(2019) Impact testing machines for metallic materials－Instrumentation
- KS D ISO 14577-4:2011 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 4:Test method for metallic and non-metallic coatings
- KS D ISO 14577-4-2011(2021) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 4：Test method for metallic and non-metallic coatings
- KS D ISO 14577-4-2011(2016) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 4：Test method for metallic and non-metallic coatings
- KS B 5551-2004 Impact testing machines for metallic materials－Instrumentation
- KS D 8300-2018 Gold brazing filler metals
- KS D ISO 4518-2012(2017) Metallic coatings－Measurement of coating thickness－Profilometric method
- KS B ISO 17292:2005 Metal ball valves for petroleum, petrochemical and allied industries
- KS B ISO 17292-2005(2020) Metal ball valves for petroleum, petrochemical and allied industries
- KS D 0044-1987 Methods of Sampling for Chemical Analysis of Ferroalloys [(3) Ferrophosphorus, Manganese Metal, Silicon Metal,Chromium Metal, Calcium Silicon and Ferroboron]
- KS D 2305-2004 Tin metal
- KS D 2313-2009 Silicon metal
- KS D 2306-2001 Metallic chromium
International Organization for Standardization (ISO), metallographic instrument
- ISO/TR 14321:1997 Sintered metal materials, excluding hardmetals - Metallographic preparation and examination
- ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
- ISO 21968:2019 Non-magnetic metallic coatings on metallic and non-metallic basis materials — Measurement of coating thickness — Phase-sensitive eddy-current method
- ISO 4518:1980 Metallic coatings; Measurement of coating thickness; Profilometric method
- ISO 11596:2021 Jewellery and precious metals — Sampling of precious metals and precious metal alloys
- ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
- ISO 14577-4:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
- ISO 9202:2019 Jewellery and precious metals — Fineness of precious metal alloys
- ISO 11596:2008 Jewellery - Sampling of precious metal alloys for and in jewellery and associated products
- ISO 4782:1981 Industrial wire screens and woven wire cloth — Diameters of metal wire
- ISO/R 956:1969 Tensile test for light metal and light metal alloy wires
- ISO/R 952:1969 Tensile testing of light metal and light metal alloy tubes
- ISO 26146:2012 Corrosion of metals and alloys - Method for metallographic examination of samples after exposure to high-temperature corrosive environments
- ISO 17292:2004 Metal ball valves for petroleum, petrochemical and allied industries
- ISO 17292:2015 Metal ball valves for petroleum, petrochemical and allied industries
- ISO 4967:1979 Steel; Determination of content of non-metallic inclusions; Micrographic method using standard diagrams
- ISO/R 953:1969 Drift expanding test on light metal and light metal alloy tubes
German Institute for Standardization, metallographic instrument
- DIN V 30995:1999 Sintered metal materials, excluding hardmetals - Metallographic preparation and examination (ISO/TR 14321:1997)
- DIN EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2005); German version EN ISO 21968:2005
- DIN ISO 4782:1993-10 Metal wire for industrial wire screens and woven wire cloth; identical with ISO 4782:1987
- DIN 12893:1976 Metal laboratory ware; stand rods
- DIN 50602:1985 Metallographic examination; microscopic examination of special steels using standard diagrams to assess the content of non-metallic inclusions
- DIN EN ISO 21968:2020-02 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019); German version EN ISO 21968:2019
- DIN 12894:1997 Metal laboratory ware - Clamps
- DIN 12895-2:1978 Metal laboratory ware; hook connector
- DIN EN ISO 14577-4:2017-04 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016); German version EN ISO 14577-4:2016
- DIN EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2007); English version of DIN EN ISO 14577-4:2007-08
- DIN 1725-5:1986 Aluminium alloys, casting alloys; ingots (pigs), liquid metal; composition
- DIN EN ISO 9202:2019-09 Jewellery and precious metals - Fineness of precious metal alloys (ISO 9202:2019); German version EN ISO 9202:2019
- DIN 50600:1980 Testing of metallic materials; Metallographic Micrographs; Picture scales and formats
- DIN EN ISO 7153-1:2001 Surgical instruments - Metallic materials - Part 1: Stainless steel (ISO 7153-1:1991, including Amendment 1:1999); English version of DIN EN ISO 7153-1:2001-02
- DIN ISO 7802:2008 Metallic Materials - Wire - Wrapping test (ISO 7802:1983); English version of DIN ISO 7802-2008-10
- DIN 2032:1987-06 Metal packages; screwed closures of light gauge metal
- DIN 1725-5 Bb.1:1986 Aluminium alloys, casting alloys; ingots (pigs), liquid metal; composition; information on alloying processes
- DIN 8571:1981 Filler metals and auxiliary metals for metal welding; Concepts, Classification
- DIN EN ISO 9202:2019 Jewellery and precious metals - Fineness of precious metal alloys (ISO 9202:2019)
- DIN EN 1904:2001-02 Precious metal - The finenesses of solders used with precious metal jewellery alloys; German version EN 1904:2000
- DIN EN 13636:2004 Cathodic protection of buried metallic tanks and related piping; German version EN 13636:2004
- DIN 51345:1986 Testing the compatibility of fire-resistant hydraulic fluids with metals
工业和信息化部, metallographic instrument
- YS/T 370-2018 Preparation methods of metallographic samples of precious metals and their alloys
- YS/T 1501-2021 Metallographic examination method of cuprous oxide for copper-containing precious metal materials
Professional Standard - Military and Civilian Products, metallographic instrument
- WJ 1855-1989 Gold electroplating for metal cladding optical instruments
- WJ 461-1995 Metal coating. Specifications for ferrous metal oxidizing coatings of optical instrument
- WJ 464-1995 Metal coating. Specifications for ferrous metal phosphate coating coatings of optical instrument
- WJ 651-1995 Specification for non-ferrous alloy metal mold castings for optical instruments
- WJ 2015-1991 Aluminum and aluminum alloy chemical conversion coatings for metal and non-metal coatings for military optical instruments
- WJ 467-1995 Metal and non-metal coatings Pre-painting surface preparation for optical instrument
- WJ 2016-1991 Metallic and non-metallic coatings Stainless steel passivation film for military optical instruments
- WJ 466-1995 Metal coating. Specifications for paint coatings of optical instrument
- WJ 455-1995 Metal coating. Specifications for nickel electroplated coatings of optical instrument
- WJ 456-1995 Metal coating. Specifications for chromium electroplated coatings of optical instrument
- WJ 457-1995 Metal coating. Specifications for cadmium electroplated coatings of optical instrument
- WJ 458-1995 Metal coating. Specifications for zinc electroplated coatings of optical instrument
- WJ 459-1995 Metal coating. Specifications for silver electroplated coatings of optical instrument
- WJ 460-1995 Metal coating. Specifications for tin electroplated coatings of optical instrument
- WJ 465-1995 Metal coating. Specifications for copper electroplated coatings of optical instrument
General Motors do Brasil, metallographic instrument
- GMSA EMS 9309663-2011 Metal - metal adhesive - medium resistance - high tixotropy - medium expansion Adesivo metal-metal - m閐ia resist阯cia - alta tixotropia - m閐ia expans鉶 Do Not use on New Programs; No Replacement
CU-NC, metallographic instrument
- NC 05-07-1986 Metallography. Microstructure of Hard Alloy Metals. Testing Method
- NC 05-09-1986 Metallography. Metallic Coating Workshop. Technological Design Specifications
- NC 05-08-1986 Metallography. Determination of Metals Grain Size, Testing Method
Professional Standard - Non-ferrous Metal, metallographic instrument
- YS/T 370-2006 Precious metals and alloys.Preparation method for metallographic samples
Professional Standard - Machinery, metallographic instrument
- JB/T 9137-2015 Sintered metal friction materials.Metallographic method
- JB/T 9137-1999 Sintered metal friction materials.Metallographic method
- JB/T 11117-2010 Metal detector for separate material
- JB/T 5069-2007 Metallographic examination method of diffusion metallized layer of steel parts
- JB/T 5069-1991 Metallographic Examination Method of Iron and Steel Parts
- JB/T 11605-2013 Non-destructive testing instruments.Metal magnetic memory instrument specification
- JB/T 11606-2013 Non-destructive testing instruments.Metal magnetic memory instrument verification
- JB/T 5326-1991 Test method of crevice corrosion of metallic material for instrument
- JB/T 6819.6-1993 Instrument material terminology - Expansion alloy, thermal bimetal, electrical vacuum material and sealing material
RU-GOST R, metallographic instrument
- GOST 1778-1970 Steel. Metallographic methods for the determination of nonmetallic inclusions
- GOST 25536-1982 Metals scales of images on photographs at metallographec examination
- GOST 8.398-1980 State system for ensuring the uniformity of measurements. Hardness testing machines for metals and alloys. Methods and means of verification
- GOST 8.044-1980 State system for ensuring the uniformity of measurements. Diamond indentors of the hardness testing machines for metal and alloys. Verification methods and means
- GOST 9.005-1972 Unified system of corrosion and ageing protection. Metals, alloys, metallic and non-metallic coatings. Permissible and impermissible contacts with metals and non-metals
- GOST 34061-2017 Welding and allied processes. Determination of hydrogen content in deposited metal and arc weld metal
- GOST 11679.2-1976 Rubber-metal shock-absorbers for instruments. Fitting. Specifications
- GOST R 57128-2016 Ferroalloys, metal chromium and metal manganese. General specifications
- GOST 11679.1-1976 Rubber-metal shock-absorbers for instruments. Specifications
- GOST 27041-1986 Ferroalloys, metal chromium and metal manganese. Methods of sulphur determination
- GOST 27069-1986 Ferroalloys, metal chromium and metal manganese. Methods for determination of carbon
RO-ASRO, metallographic instrument
Professional Standard - Railway, metallographic instrument
- TB/T 2451-1993 Metallographic examination of non-metallic inclusions in cast steel
Professional Standard - Electricity, metallographic instrument
- DL/T 1273-2013 Photoelectric type (CCD) Remote Reading Bimetal Benchmark Station
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, metallographic instrument
Professional Standard - Aviation, metallographic instrument
- HB 8110-2002 Nonmetal smooth bush
- HB 8276-2002 Metal plain bush used for instrument (8276)
- HB 8277-2002 Metal plain bush used for instrument (8277)
- HB 8278-2002 Metal plain bush used for instrument (8278)
- HB 8279-2002 Metal plain bush used for instrument (8279)
- HB 8280-2002 Metal plain bush used for instrument (8280)
- HB 8281-2002 Metal plain bush used for instrument (8281)
- HB 8282-2002 Non-metal bush with flange for instrument
- HB 5171-1981 Metallographic examination standard for copper-containing precious metal materials cuprous oxide
- HB/Z 352-2002 Stabilizing treatment for metallic parts of precise equipment & instrument for aviation
Japanese Industrial Standards Committee (JISC), metallographic instrument
American Society for Testing and Materials (ASTM), metallographic instrument
- ASTM B899-05 Standard Terminology Relating to Non-ferrous Metals and Alloys
- ASTM B899-03a Standard Terminology Relating to Non-ferrous Metals and Alloys
- ASTM B899-03 Standard Terminology Relating to Non-ferrous Metals and Alloys
- ASTM B899-06 Standard Terminology Relating to Non-ferrous Metals and Alloys
- ASTM B899-04 Standard Terminology Relating to Non-ferrous Metals and Alloys
- ASTM B899-99a Standard Terminology Relating to Non-ferrous Metals and Alloys
- ASTM B899-01 Standard Terminology Relating to Non-ferrous Metals and Alloys
- ASTM B899-01e1 Standard Terminology Relating to Non-ferrous Metals and Alloys
- ASTM B899-02 Standard Terminology Relating to Non-ferrous Metals and Alloys
- ASTM B899-09 Standard Terminology Relating to Non-ferrous Metals and Alloys
- ASTM B899-09e1 Standard Terminology Relating to Non-ferrous Metals and Alloys
- ASTM B899-13 Standard Terminology Relating to Non-ferrous Metals and Alloys
- ASTM E1724-95(2001) Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials
- ASTM E1724-95 Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials
- ASTM A902-04 Standard Terminology Relating to Metallic Coated Steel Products
- ASTM E44-84e1 Definitions of Terms Relating to Heat Treatment of Metals
- ASTM A902-17a Standard Terminology Relating to Metallic Coated Steel Products
- ASTM E2148-01 Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
- ASTM E2148-11a Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
- ASTM E2148-11 Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
- ASTM E2148-11b Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
- ASTM E2148-21 Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
- ASTM E2148-16 Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
- ASTM E2148-03 Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
- ASTM A902-05a Standard Terminology Relating to Metallic Coated Steel Products
- ASTM A902-05 Standard Terminology Relating to Metallic Coated Steel Products
- ASTM A902-03 Standard Terminology Relating to Metallic Coated Steel Products
- ASTM A902-06a Standard Terminology Relating to Metallic Coated Steel Products
- ASTM A902-06 Standard Terminology Relating to Metallic Coated Steel Products
- ASTM A902-08 Standard Terminology Relating to Metallic Coated Steel Products
- ASTM A902-08a Standard Terminology Relating to Metallic Coated Steel Products
- ASTM D2881-73(1983) Classification of Metal Working Fluids and Related Materials
- ASTM A902-99 Standard Terminology Relating to Metallic Coated Steel Products
- ASTM A902-02 Standard Terminology Relating to Metallic Coated Steel Products
- ASTM A902-01 Standard Terminology Relating to Metallic Coated Steel Products
- ASTM A902-18 Standard Terminology Relating to Metallic Coated Steel Products
- ASTM A902-17 Standard Terminology Relating to Metallic Coated Steel Products
- ASTM A902-18a Standard Terminology Relating to Metallic Coated Steel Products
- ASTM A902-13 Standard Terminology Relating to Metallic Coated Steel Products
- ASTM A902-13a Standard Terminology Relating to Metallic Coated Steel Products
- ASTM A902-13b Standard Terminology Relating to Metallic Coated Steel Products
- ASTM A902-15 Standard Terminology Relating to Metallic Coated Steel Products
- ASTM E2148-06 Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
- ASTM B354-98 Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
- ASTM B354-05 Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
- ASTM B354-12 Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
- ASTM D2881-19 Standard Classification for Metalworking Fluids and Related Materials
- ASTM B354-16 Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
- ASTM C286-99(2017) Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems
- ASTM D2881-12 Standard Classification for Metalworking Fluids and Related Materials
- ASTM D2881-12(2014) Standard Classification for Metalworking Fluids and Related Materials
- ASTM A902-23 Standard Terminology Relating to Metallic Coated Steel Products
Association Francaise de Normalisation, metallographic instrument
- NF A91-321:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method.
- NF EN ISO 21968:2019 Revêtements métalliques non magnétiques sur des matériaux de base métalliques et non métalliques - Mesurage de l'épaisseur de revêtement - Méthode par courants de Foucault sensible aux variations de phase
- NF A91-321*NF EN ISO 21968:2019 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
- FD E29-753:2014 Gas cylinders - Hydrogen compatibility testing for metals
- NF A03-155-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings.
- NF A91-149*NF EN ISO 15720:2001 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography.
- NF A06-620*NF ISO 11596 :2022 Jewellery and precious metals - Sampling of precious metals and precious metal alloys
- NF A03-155-4*NF EN ISO 14577-4:2017 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings
- NF X11-513*NF ISO 4782:1991 Metal wire for industrial wire screens and wowen wire cloth.
- NF EN 1856-2:2009 Conduits de fumée - Prescriptions relatives aux conduits de fumée métalliques - Partie 2 : tubages et éléments de raccordement métalliques
- NF X11-512:1982 Sieves and sieving. Terminology relating to defects in wire screens.
- NF A07-020*NF EN ISO 9202:2019 Jewellery and precious metals - Fineness of precious metal alloys
- NF EN ISO 9202:2019 Joaillerie, bijouterie et métaux précieux - Titre des alliages de métaux précieux
- NF E29-475:2005 Metal ball valves for petroleum, petrochemical and allied industries.
- NF E29-475*NF EN ISO 17292:2016 Metal ball valves for petroleum, petrochemical and allied industries
- NF P34-402:1987 Roofing. Metal. Preformed metallic flashings. Requirements.
- NF P34-403:1987 Couverture - Métal - Couvre-joints métalliques - Spécifications.
- NF ISO 4782:1991 Fils métalliques pour tamis et tissus métalliques
- NF A95-342:1985 Powder metallurgy. Sintered materials including hardmetals. Micrographic examination techniques.
- NF P24-101:1986 Metal joinery. External joinery. Terminology.
- NF A05-614*NF EN 13636:2004 Cathodic protection of buried metallic tanks and related piping
European Committee for Standardization (CEN), metallographic instrument
- EN ISO 21968:2019 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019)
- EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phasesensitive eddy-current method
- EN 24505:1993 Hardmetals - Metallographic Determination of Porosity and Uncombined Carbon
- EN 4340:2002 Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding; Wire and rod
- EN 4325:2001 Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al) - Filler metal for welding; Wire and rod
- EN 4326:2001 Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding; Wire and rod
- EN 13636:2004 Cathodic protection of buried metallic tanks and related piping
British Standards Institution (BSI), metallographic instrument
- BS EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
- BS EN ISO 21968:2019 Non-magnetic metallic coatings on metallic and non- metallic basis materials. Measurement of coating thickness. Phase-sensitive eddy-current method
- BS EN ISO 14577-4:2007 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
- BS EN ISO 14577-4:2016 Tracked Changes. Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
- BS EN ISO 1797-1:2011 Dentistry. Shanks for rotary instruments. Shanks made of metals
- BS EN ISO 4499-1:2020 Hardmetals. Metallographic determination of microstructure - Photomicrographs and description
- 21/30423079 DC BS ISO 11596. Jewellery and precious metals. Sampling of precious metals and precious metal alloys
- BS EN ISO 4492:2013 Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
- BS ISO 11596:2021 Tracked Changes. Jewellery and precious metals. Sampling of precious metals and precious metal alloys
- BS EN ISO 14577-3:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
- BS EN ISO 14577-3:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
- BS ISO 11596:2010 Jewellery. Sampling of precious metal alloys for and in jewellery and associated products
- BS ISO 7539-10:2013 Corrosion of metals and alloys. Stress corrosion testing. Reverse U-bend method
- BS EN ISO 4499-2:2020 Hardmetals. Metallographic determination of microstructure - Measurement of WC grain size
- BS EN ISO 4518:1980 Metallic coatings - Measurement of coating thickness - Profilometric method
- BS EN 1904:2000 Precious metals - The finenesses of solders used with precious metal jewellery alloys
- BS ISO 4782:1987 Specification for metal wire for industrial wire screens and woven wire cloth
- BS ISO 4782:1998 Specification for metal wire for industrial wire screens and woven wire cloth
- BS ISO 26146:2012 Corrosion of metals and alloys. Method for metallographic examination of samples after exposure to high-temperature corrosive environments
- BS EN ISO 4499-4:2016 Hardmetals. Metallographic determination of microstructure. Characterisation of porosity, carbon defects and eta-phase content
- BS 6615:1996 Specification for dimensional tolerances for metal and metal alloy castings
- BS EN 13523-3:2014 Coil coated metals. Test methods. Colour difference. Instrumental comparison
- BS EN 13523-3:2001 Coil coated metals - Test methods - Colour difference - Instrumental comparison
- BS EN 13523-3:2021 Coil coated metals. Test methods. Colour difference and metamerism. Instrumental comparison
- BS EN ISO 14577-2:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
- BS ISO 27831-2:2009 Metallic and other inorganic coatings. Cleaning and preparation of metal surfaces. Non-ferrous metals and alloys
- BS ISO 27831-1:2009 Metallic and other inorganic coatings. Cleaning and preparation of metal surfaces. Ferrous metals and alloys
- BS ISO 27831-2:2008 Metallic and other inorganic coatings - Cleaning and preparation of metal surfaces - Non-ferrous metals and alloys
- BS ISO 27831-1:2008 Metallic and other inorganic coatings - Cleaning and preparation of metal surfaces - Ferrous metals and alloys
- 19/30367136 DC BS ISO 22764. Jewellery and precious metals. Precious metal. Fineness of solders used with precious metal jewellery alloys
- BS EN ISO 6871-1:1997 Dental base metal casting alloys - Cobalt-based alloys
- BS EN 13636:2004 Cathodic protection of buried metallic tanks and related piping
Professional Standard - Chemical Industry, metallographic instrument
Society of Automotive Engineers (SAE), metallographic instrument
- SAE J474-1985 Electroplating and Related Finishes
- SAE AMS4787F-2008 Gold-Nickel Alloy, Brazing Filler Metal, High Temperature 82Au - 18Ni 1740 °F (949 °C) Solidus-Liquidus Temperature
- SAE AMS4787H-2022 Gold-Nickel Alloy, Brazing Filler Metal, High Temperature 82Au - 18Ni 1740 °F (949 °C) Solidus-Liquidus Temperature
- SAE MAM4778C-2000 NICKEL ALLOY, BRAZING FILLER METAL 92Ni - 4.5Si - 3.1B 980 to 1040 °C Solidus-Liquidus Range
- SAE AMS4778H-2006 Nickel Alloy, Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus Range
- SAE AMS4778G-2000 Nickel Alloy, Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus Range
- SAE MAM4778B-1994 NICKEL ALLOY, BRAZING FILLER METAL 92Ni - 4.5Si - 3.1B 980 to 1040 °C Solidus-Liquidus Range
- SAE MAM4778A-1992 NICKEL ALLOY BRAZING FILLER METAL 92Ni - 4.5Si - 3.1B 980 to 1040 °C Solidus-Liquidus Range
- SAE MAM4778-1989 BRAZING FILLER METAL, NICKEL ALLOY 92Ni - 4.5Si - 3.1B 980° - 1040°C Solidus-Liquidus Range
- SAE AMS4782H-2022 Nickel Alloy, Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 °F (1080 °C) Solidus, 2075 °F (1135 °C) Liquidus
- SAE AMS4779L-2022 Nickel Alloy, Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 °F (982 °C) Solidus, 1950 °F (1066 °C) Liquidus
- SAE AMS4784D-1999 GOLD-PALLADIUM-NICKEL ALLOY BRAZING FILLER METAL, HIGH TEMPERATURE 50Au - 25Pd - 25Ni 2015 to 2050 °F (1102 to 1121°C) Solidus-Liquidus Range
- SAE AMS4786F-2002 Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 70Au - 8.0Pd - 22Ni 1845 to 1915 °F (1007 to 1046 °C) Solidus-Liquidus Range
- SAE AMS4785F-2002 Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 30Au - 34Pd - 36Ni 2075 to 2130 °F (1135 to 1166 °C) Solidus-Liquidus Range
- SAE AMS4786K-2021 Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 70Au - 8.0Pd - 22Ni 1845 to 1915 °F (1007 to 1046 °C) Solidus-Liquidus Range (UNS P00700)
- SAE AMS4779F-2000 Nickel Alloy, Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 to 1950 °F (982 to 1066 °C) Solidus-Liquidus Range
- SAE AMS4782E-2000 Nickel Alloy, Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 to 2075 °F (1080 to 1135 °C) Solidus-Liquidus Range
- SAE AMS4779G-2012 Nickel Alloy, Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 to 1950 °F (982 to 1066 °C) Solidus-Liquidus Range
- SAE AMS4782F-2012 Nickel Alloy, Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 to 2075 °F (1080 to 1135 °C) Solidus-Liquidus Range
- SAE AMS4763A-2009 Silver Alloy, Brazing Filler Metal 56Ag - 22Cu - 17Zn - 5.0Sn 1145 to 1205 °F (618 to 652 °C) Solidus-Liquidus Range
- SAE AMS4768H-2009 Silver Alloy, Brazing Filler Metal 35Ag - 26Cu - 21Zn - 18Cd 1125 to 1295 °F (607 to 702 °C) Solidus-Liquidus Range
- SAE AMS4761A-2009 Silver Alloy, Brazing Filler Metal 38Ag - 32Cu - 28Zn - 2.0Sn 1200 to 1330 °F (649 to 721 °C) Solidus-Liquidus Range
- SAE AMS4769F-2009 Silver Alloy, Brazing Filler Metal 45Ag - 24Cd - 16Zn - 15Cu 1125 to 1145 °F (607 to 618 °C) Solidus-Liquidus Range
- SAE AMS4780E-2007 Manganese Alloy, Brazing Filler Metal 66Mn - 16Ni - 16Co - 0.80B 1770 to 1875 °F (966 to 1024 °C) Solidus-Liquidus Range
- SAE AMS4763C-2023 Silver Alloy, Brazing Filler Metal 56Ag - 22Cu - 17Zn - 5.0Sn 1145 to 1205 °F (618 to 652 °C) Solidus-Liquidus Range
- SAE AMS4768J-2015 Silver Alloy, Brazing Filler Metal 35Ag - 26Cu - 21Zn - 18Cd 1125 to 1295 °F (607 to 702 °C) Solidus-Liquidus Range
- SAE AMS2662-2019 Brazing, Gold-Nickel Alloy Filler Metal
- SAE AMS4771H-2009 Silver Alloy, Brazing Filler Metal 50Ag - 16Cd - 15.5Zn - 15.5Cu - 3.0Ni 1170 to 1270 °F (632 to 688 °C) Solidus-Liquidus Range
- SAE AMS4771J-2015 Silver Alloy, Brazing Filler Metal 50Ag - 16Cd - 15.5Zn - 15.5Cu - 3.0Ni 1170 to 1270 °F (632 to 688 °C) Solidus-Liquidus Range
- SAE J1086-1995 Numbering Metals and Alloys
- SAE J1086-2012 Numbering Metals and Alloys
- SAE AMS4770K-2009 Silver Alloy Brazing Filler Metal 50Ag - 18Cd - 16.5Zn - 15.5Cu 1160 to 1175 °F (627 to 635 °C) Solidus-Liquidus Range
- SAE AMS4788A-2009 Silver Alloy Brazing Filler Metal 50Ag - 28Zn - 20Cu - 2.0Ni 1220 to 1305 °F (660 to 707 °C) Solidus-Liquidus Range
- SAE AMS4770L-2015 Silver Alloy Brazing Filler Metal 50Ag - 18Cd - 16.5Zn - 15.5Cu 1160 to 1175 °F (627 to 635 °C) Solidus-Liquidus Range
Defense Logistics Agency, metallographic instrument
Professional Standard - Aerospace, metallographic instrument
- QJ 1889-1990 Metallographic inspection method for metallized holes in printed circuit boards
- QJ 2136.3-1991 Specimens for physical and chemical re-examination of metallic materials Specimens for metallographic examination
BE-NBN, metallographic instrument
ES-UNE, metallographic instrument
- UNE-EN ISO 21968:2020 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019)
- UNE-EN ISO 9202:2020 Jewellery and precious metals - Fineness of precious metal alloys (ISO 9202:2019)
Group Standards of the People's Republic of China, metallographic instrument
WRC - Welding Research Council, metallographic instrument
- BULLETIN 438-1999 INTERMETALLIC PHASE PRECIPITATION IN DUPLEX STAINLESS STEELS AND WELD METALS: METALLURGY@ INFLUENCE ON PROPERTIES@ WELDING AND TESTING ASPECTS
- BULLETIN 220-1976 METAL-TO-METAL ADHESIVE BONDING
KR-KS, metallographic instrument
PT-IPQ, metallographic instrument
National Metrological Verification Regulations of the People's Republic of China, metallographic instrument
- JJG(交通) 027-2015 Water Transport Engineering.Nonmetal Ultrasonic Detector
- JJG 988-2004 Vertical Metal Tank Diametrical Deviation Measuring Instrument
- JJG(交通) 027-2004 Water Transport Engineering-Nonmetal Ultrasonic Detector
- JJG 027-2015 Non-metallic acoustic wave detector for water transport engineering
Professional Standard - Traffic, metallographic instrument
- JT/T 576-2015 Water transport engineering.Nonmetal ultrasonic detector
- JT/T 576-2004 Water transport engineering.Nonmetal ultrasonic detector
Professional Standard - Petroleum, metallographic instrument
- SY/T 6368-1998 Detector on buried metal pipelines anti-corrosion coating faults
- SY 6368-1998 Underground metal pipeline anti-corrosion layer leak detector
Standard Association of Australia （SAA）, metallographic instrument
American Welding Society (AWS), metallographic instrument
- WRC 438:1999 Intermetallic Phase Precipitation in Duplex Stainless Steels and Weld Metals: Metallurgy, Influence on Properties, Welding and Testing Aspects
- WRC 220:1976 Metal-to-Metal Adhesive Bonding
- WRC 015:1953 Slag-Metal Interaction in Arc Welding
- WRC 210:1975 The Fabrication of Dissimilar Metal Joints Containing Reactive and Refractory Metals
- WRC 085:1963 Welding Of Reactive And Refractory Metals
Danish Standards Foundation, metallographic instrument
- DS/EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
- DS/EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
- DS/ISO 11596:2008 Jewellery - Sampling of precious metal alloys for and in jewellery and associated products
- DS/EN ISO 17292:2004 Metal ball valves for petroleum, petrochemical and allied industries
- DS/EN ISO 1562:1995 Dental casting gold alloys
AASHTO - American Association of State Highway and Transportation Officials, metallographic instrument
AENOR, metallographic instrument
- UNE-EN ISO 21968:2006 Non-magnetic metallic coatings on metallic and non-metallic basis materials. Measurement of coating thickness. Phase sensitive eddy-current method (ISO 21968:2005)
- UNE-EN ISO 14577-4:2017 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016)
- UNE 7425:1986 METALLIC MATERIALS. WIRE. WRAPPING TEST.
SAE - SAE International, metallographic instrument
- SAE AMS4787D-1992 Gold-Nickel Alloy Brazing Filler Metal@ High Temperature 82Au - 18Ni 1740 Degrees F (949 Degrees C) Solidus- Liquidus Temperature
- SAE AMS4778F-1994 NICKEL ALLOY@ BRAZING FILLER METAL 92Ni - 4.5Si - 3.1B 1800 to 1900 degrees Solidus-Liquidus Range (UNS N99630)
- SAE AMS4778D-1989 Brazing Filler Metal@ Nickel Alloy 92Ni - 4.5Si - 3.1B 1800° to 1900 °F Solidus-Liquidus Range (UNS N99630)
- SAE AMS4787E-1999 Gold-Nickel Alloy@ Brazing Filler Metal@ High Temperature 82Au - 18Ni 1740 Degrees F (949 Degrees C) Solidus-Liquidus Temperature (UNS P00820)
- SAE AMS4786G-2007 Gold-Palladium-Nickel Alloy@ Brazing Filler Metal@ High Temperature 70Au - 8.0Pd - 22Ni 1845 to 1915 °F (1007 to 1046 °C) Solidus-Liquidus Range (UNS P00700)
- SAE AMS4784F-2001 Gold-Palladium-Nickel Alloy@ Brazing Filler Metal@ High Temperature 50Au - 25Pd - 25Ni 2015 to 2050 °F (1102 to 1121 °C) Solidus-Liquidus Range (UNS P00500)
- SAE AMS4782G-2017 Nickel Alloy@ Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 °F (1080 °C) Solidus@ 2075 °F (1135 °C) Liquidus (UNS N99650)
- SAE AMS4778E-1992 Nickel Alloy Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus Range (UNS N99630)
- SAE AMS4779K-2018 Nickel Alloy@ Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 °F (982 °C) Solidus@ 1950 °F (1066 °C) Liquidus (UNS N99640)
- SAE AMS4779J-2017 Nickel Alloy@ Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 °F (982 °C) Solidus@ 1950 °F (1066 °C) Liquidus (UNS N99640)
- SAE MAM4778D-2003 Nickel Alloy@ Brazing Filler Metal 92Ni - 4.5Si - 3.1B 980 to 1040 °C Solidus-Liquidus Range (UNS N99630)
- SAE AMS4778L-2019 Nickel Alloy@ Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus Range (UNS N99630)
- SAE AMS4785G-2007 Gold-Palladium-Nickel Alloy@ Brazing Filler Metal@ High Temperature 30Au - 34Pd - 36Ni 2075 to 2130 °F (1135 to 1166 °C) Solidus-Liquidus Range (UNS P00300)
- SAE AMS4785E-1999 Gold-Palladium-Nickel Alloy@ Brazing Filler Metal@ High Temperature 30Au - 34Pd - 36Ni 2075 to 2130 °F (1135 to 1166 °C) Solidus-Liquidus Range (UNS P00300)
- SAE AMS4773G-2016 Silver Alloy@ Brazing Filler Metal 60Ag – 30Cu – 10Sn 1115 to 1325 °F (602 to 718 °C) Solidus-Liquidus Range (UNS P07600)
- SAE AMS4778G-1995 Nickel Alloy@ Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 Degrees F Solidus-Liquidus Range (UNS N99630)
- SAE MAM4778C-1995 Nickel Alloy@ Brazing Filler Metal 92Ni - 4.5Si - 3.1B 980 to 1040 Degrees C Solidus- Liquidus Range (UNS N99630)
- SAE AMS4782D-1994 Nickel Alloy@ Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 to 2075 °F (1080 to 1135 °C) Solidus-Liquidus Range (UNS N99650)
- SAE J1086-1989 Numbering Metals and Alloys
- SAE J1086-1983 Numbering Metals and Alloys
- SAE AMS2663A-1992 SILVER ALLOY BRAZING FILLER METAL 56AG - 22CU - 17ZN - 5.0SN 1152 - 1203 DEGREES F (622 - 651 DEGREES C) SOLIDUS-LIQUIDUS RANGE (UNS P07563)
- SAE AMS4789-1992 SILVER ALLOY BRAZING FILLER METAL 56Ag - 22Cu - 17Zn - 5.0Sn 1152 to 1205 °F (618 to 652°C) Solidus-Liquidus Range (UNS P07563)
- SAE AMS4780G-2018 Manganese Alloy@ Brazing Filler Metal 66Mn - 16Ni - 16Co - 0.80B 1770 to 1875 °F (966 to 1024 °C) Solidus-Liquidus Range (UNS M26800)
- SAE AMS4789A-1993 SILVER ALLOY BRAZING FILLER METAL 56AG - 22CU - 17ZN - 5.0SN 1152 TO 1205 DEGREES F (618 TO 652 DEGREES C) SOLIDUS-LIQUIDUS RANGE
FI-SFS, metallographic instrument
SE-SIS, metallographic instrument
- SIS SS IEC 250:1982 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
- SIS SS IEC 248:1988 Nuclear instrumen ta tion — Dimensions of planchets usedin nuclear electronic instruments
- SIS MNC 1000-1979 General information concerning Swedish metal standards
- SIS SS 11 26 58-1983 Metallic materials - Wire - Wrapping test
- SIS 11 26 42-1967 Flanging test on tubes
Professional Standard - Geology, metallographic instrument
- DZ/T 0101.9-1994 Geological instruments and meters manufacturing time quota non-ferrous metal casting
Professional Standard-Ships, metallographic instrument
- CB 1085.1-1989 Non-ferrous metal sand casting with man-hour quota for instrumentation manufacturing
Lithuanian Standards Office , metallographic instrument
- LST EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2005)
- LST EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2007)
HU-MSZT, metallographic instrument
CO-ICONTEC, metallographic instrument
American National Standards Institute （ANSI), metallographic instrument
- ANSI/ASTM E2148b:2011 Guide For Using Documents Related To Metalworking Or Metal Removal Fluid Health And Safety
- ANSI/EIA 377-1:1972 Metallized Dielectric Capacitors in Metallic and Non-Metallic Cases for Direct Current Application
国家市场监督管理总局、中国国家标准化管理委员会, metallographic instrument
- GB/T 21838.4-2020 Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 4: Test method for metallic and non-metallic coatings
- GB 16423-2020 Safety regulation for metal and nonmetal mines
Indonesia Standards, metallographic instrument
National Metrological Technical Specifications of the People's Republic of China, metallographic instrument
- JJF 1090-2002 Calibration Specification for Nonmetal Building Materials Plastic Measuring Instruments
- JJF 1565-2016 Calibration specification for heavy metal water quality online analyzer
Jilin Provincial Standard of the People's Republic of China, metallographic instrument
TR-TSE, metallographic instrument
- TS 925-1971 FRICTION L?NINGS FOR CLUTCHES (METALLIC, SEMIMETALLIC AND METAL -CERAMIC)
- TS 153-1964 METAL CUTTING SAWS
Electronic Components, Assemblies and Materials Association, metallographic instrument
- ECA 377-1970 Metallized Dielectric Capacitors in Metallic and Non-Metallic Cases for Direct Current Application ANSI C83.62-71
GOSTR, metallographic instrument
- GOST 11679.2-2019 Rubber-metal instrument shock-absorbers. Fittings. Specifications
- GOST 11679.1-2018 Rubber-metal instrument shock-absorbers. Specifications
- GOST 9716.1-1979 Copper-zinc alloys. Method of spectral analysis of metal standard spesimens with photographic registration of spectrum
BR-ABNT, metallographic instrument
PL-PKN, metallographic instrument
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, metallographic instrument
- GJB 5372-2005 Metal material dynamic impact test-instrumental method
Military Standard of the People's Republic of China-General Armament Department, metallographic instrument
- GJB 8674-2015 General specification for multi-metal dewars for thermal imaging cameras
(U.S.) Ford Automotive Standards, metallographic instrument
National Fire Protection Association (NFPA), metallographic instrument
IT-UNI, metallographic instrument
- UNI 3666-1965 Corrosion of metallic materials. General testing specifications.
Canadian Standards Association (CSA), metallographic instrument
- CSA W48-06-2006 Filler metals and allied materials for metal arc welding Second Edition [Superseded: CSA W48.1-M1991, CSA W48.1-M1991, CSA W48.2-M1992, CSA W48.2-M1992, CSA W48.3-93, CSA W48.3-93, CSA W48.4-95, CSA W48.4-95, CSA W48.5-M1990, CSA W48.5-M1990]
ES-AENOR, metallographic instrument
United States Navy, metallographic instrument
ZA-SANS, metallographic instrument
GM North America, metallographic instrument
AIA/NAS - Aerospace Industries Association of America Inc., metallographic instrument
YU-JUS, metallographic instrument
- JUS M.D4.002-1989 Industrial wire screens and woven wire cloth. Diameters of metal wire
- JUS C.A6.037-1991 Metali1c coatings. heasurement of coatlng tbickness. Profilometrlc metbo?
Shandong Provincial Standard of the People's Republic of China, metallographic instrument
- DB37/T 2479-2014 Technical conditions for automatic online heavy metal monitor in water quality
VN-TCVN, metallographic instrument
未注明发布机构, metallographic instrument
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, metallographic instrument
- GB/T 34172-2017 Microbeam analysis—Electron backscatter diffraction—Phase analysis method of metal and alloy
Professional Standard - Building Materials, metallographic instrument
GB-REG, metallographic instrument
Professional Standard - Rare Earth, metallographic instrument
Taiwan Provincial Standard of the People's Republic of China, metallographic instrument
Building Officials and Code Administrators International(U.S.), metallographic instrument