ZH
RU
ES
Method of Angular Dimension Measurement
Method of Angular Dimension Measurement, Total:500 items.
In the international standard classification, Method of Angular Dimension Measurement involves: Elements of buildings, Technical drawings, Materials for aerospace construction, Metrology and measurement in general, Linear and angular measurements, Software development and system documentation, Construction materials, Refractories, Surface treatment and coating, Fibre optic communications, Passenger cars. Caravans and light trailers, Non-textile floor coverings, Headgear. Clothing accessories. Fastening of clothing, Cases. Boxes. Crates, Optical equipment, Furniture, Beekeeping, Road vehicles in general, Tyres, Fishing and fish breeding, Wood, sawlogs and sawn timber, Pipeline components and pipelines, Environmental testing, Technical product documentation, Sacks. Bags, Road vehicle systems, Non-destructive testing, Paper products, Ceramics, Audio, video and audiovisual engineering, Electrical wires and cables, Wood-based panels, Valves, Industrial automation systems, Quality, Pharmaceutics, Clothes, Wood technology processes, Earth-moving machinery, Metalliferous minerals, Paper and board, Protection against crime, Products of the textile industry, Railway rolling stock, Ferroalloys, Rubber and plastics products, Measurement of time, velocity, acceleration, angular velocity, Fasteners, Lamps and related equipment, Plastics, Installations in buildings, Cans. Tins. Tubes, Machine tool systems, Cellular materials, Thermodynamics and temperature measurements, Footwear, Leather technology, Flexible drives and transmissions, Jewellery, Bearings, Telecommunication systems, Shafts and couplings, Hospital equipment, Vocabularies, Sensory analysis, Capacitors, Optics and optical measurements, Paint ingredients, Products of the chemical industry, Iron and steel products, Structures of buildings, Powder metallurgy, Components for aerospace construction, Road engineering, Construction industry, Testing of metals, Semiconducting materials, Fluid power systems, Non-ferrous metals, Insulating materials, Construction equipment, Materials for the reinforcement of composites, Construction of waterways and ports, Meat, meat products and other animal produce, Home textiles. Linen, Motor cycles and mopeds, Textile auxiliary materials, Farming and forestry, Quantities and units, Textile fibres, Electronic components in general, Medical equipment, Protection of and in buildings, Aids for disabled or handicapped persons, Particle size analysis. Sieving, Raw materials for rubber and plastics.
Korean Agency for Technology and Standards (KATS), Method of Angular Dimension Measurement
- KS F 2636-2010 Door leaves-Measurement of dimensions and of defects of squareness
- KS F 2636-2000 Door leaves-Measurement of dimensions and of defects of squareness
- KS A 0108-2001 Technical drawings-Tolerancing of linear and angular dimensions
- KS R 0018-2014(2019) Measuring method of automobile exterior dimensions
- KS F 2231-1999 Measuring method for dimensions and squareness of polystyrene composite wood wool cement boards
- KS L 3111-1995 Measuring method for dimension of fire brick
- KS L 3111-1962 Measuring method for dimension of fire brick
- KS T 1335-2012 Standard test method for determining interior dimensions of fiberboard boxes(Box gage method)
- KS R 0018-2014 Measuring method of automobile exterior dimensions
- KS F ISO 8904-2004(2009) Broadleaved sawn timber－Sizes－Methods of measurement
- KS F ISO 737-2004(2009) Coniferous sawn timber－Sizes－Methods of measurement
- KS R 0018-1971 Measuring method of automobile exterior dimensions
- KS T ISO 6591-1:2015 Description and method of measurement for empty paper sack
- KS T ISO 6591-1:2004 Description and method of measurement for empty paper sack
- KS X ISO/IEC TR 14143-3:2005 Information technology-Software measurement ? Functional size measurement-Part 3:Verification of functional size measurement methods
- KS X ISO/IEC TR 14143-3-2005(2020) Information technology－Software measurement?Functional size measurement－Part 3：Verification of functional size measurement methods
- KS F ISO 737:2004 Coniferous sawn timber-Sizes-Methods of measurement
- KS F ISO 8904:2004 Broadleaved sawn timber-Sizes-Methods of measurement
- KS F ISO 737:2013 Coniferous sawn timber－Sizes－Methods of measurement
- KS F ISO 8904:2013 Broadleaved sawn timber－Sizes－Methods of measurement
- KS F 2231-2016 Measuring method for dimensions and squareness of polystyrene composite wood wool cement boards
- KS L 3516-2007(2012) Testing method for grain size of light weight castable refractories
- KS L 3516-1987 Testing method for grain size of light weight castable refractories
- KS B ISO 9248:2004 Earth-moving machinery-Units for dimensions, performance and capacities, and their measurement accuracies
- KS B ISO 9248:2014 Earth-moving machinery — Units for dimensions, performance and capacities and their measurement accuracies
- KS F 2636-2010(2021) Door leaves－Measurement of dimensions and of defects of squareness
- KS D 0046-2014 Methods of sampling for size analysis of ferroalloys and size determination
- KS D 0046-2014(2019) Methods of sampling for size analysis of ferroalloys and size determination
- KS D 0046-1987 Methods of sampling for size analysis of ferroalloys and size determination
- KS C IEC 61341-2014(2019) Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
- KS F 2280-1981(1996) GENERAL RULES OF MEASURING METHOD FOR DIMENSION OF EQUIPMENT UNITS FOR DWELLINGS
- KS F 2280-1986 GENERAL RULES OF MEASURING METHOD FOR DIMENSION OF EQUIPMENT UNITS FOR DWELLINGS
- KS F ISO 16985-2006(2011) Wood-based panels－Determination of dimensional changes associated with changes in relative humidity
- KS T ISO 6591-2:2012 Packaging－Sacks－Description and method of measurement for empty sacks made from thermoplastic flexible film
- KS F 2553-2017(2022) Methods for samples of aggregate to testing size
- KS X ISO/IEC 14143-2-2007(2017) Information technology－Software measurement－Functional size measurement－Part 2：Conformity evaluation of software size measurement methods to KS X 2222－1：2001
- KS X ISO/IEC 19761-2006(2021) Software engineering－COSMIC-FFP－A functional size measurement method
- KS X ISO/IEC 19761-2006(2017) Software engineering－COSMIC-FFP－A functional size measurement method
- KS C IEC 61341:2003 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
- KS C IEC 61341:2014 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
- KS K ISO 16663-2:2015 Fishing nets－Method of test for the determination of mesh size－Part 2：Length of mesh
- KS K ISO 16663-2:2021 Fishing nets — Method of test for the determination of mesh size —Part 2: Length of mesh
- KS M ISO 20873:2020 Footwear — Test methods for outsoles — Dimensional stability
- KS D 0209-1982(1997) DETERMINATION OF FERRITE GRAIN SIZE TEST FOR STEEL
- KS D 0209-1982 DETERMINATION OF FERRITE GRAIN SIZE TEST FOR STEEL
- KS M ISO 4671:2018 Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
- KS K ISO 16663-2:2010 Fishing nets-Method of test for the determination of mesh size-Part 2:Length of mesh
- KS M 3068-2014 Method for determination of dimension of polytetrafluoroethylene parts
- KS M ISO 4671:2013 Rubber and plastics hoses and hose assemblies－Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
- KS M ISO 4671:2008 Rubber and plastics hoses and hose assemblies-Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
- KS K 0597-2006 Test method for dimensional change in steam pressing
- KS A 5554-2021 Measurement and analysis methods of hand dimensions using digital 3-dimensional hand scan data
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Method of Angular Dimension Measurement
- GB/T 22636-2008 Door leaves.Dimensions,rectangularity and flatness.Test method
- GB/T 11378-1989 Metallic coatings--Measurement of coating thickness--Profilometric method
- GB/T 6964-1986 Fishing nets--Method of measure for mesh size
- GB/T 12673-1990 Motor vehicles--Basic dimensions--Measuring method
- GB/T 521-2003 Test method of measuring peripheral dimensions for tyres
- GB/T 6964-2010 Determination of mesh size of fishing nets
- GB/T 521-2012 Test method of measuring peripheral dimensions for tyres
- GB/T 521-2023 Measurement method of tire outer edge size
- GB/T 8806-1988 Method for dimension measuring of plastic pipes
- GB/T 2837-1998 Measuring method for size and deviation of vitrified clay pipe
- GB/T 4909.2-1985 Test methods for bare wires--Measurement of dimensions
- GB/T 11193-1998 Method of mesuring pneumatic aircraft tyre peripheral dimensions
- GB/T 16160-2017 Size definition and method of anthropometric measurement for clothing
- GB/T 17346-2023 Method for measuring the position and size of the pedals of automobiles
- GB/T 15972.22-2008 Specifications for optical fibre test methods.Part 22:Measurement methods and test procedures for dimensions.Length measurement
- GB/T 21153-2007 Earth-moving machinery.Units for dimensions,perfprmance and capacities, and their measurment accuracies
- GB/T 4909.2-2009 Test methods for bare wires.Part 2:Measurement of dimensions
- GB/T 4074.2-2008 Winding wires.Test methods.Part 2:Determination of dimensions
- GB/T 4074.2-1999 Test methods for winding wires-- Part 2: Determination of dimensions
- GB/T 3301-1999 Standard method for measurement of volume, rim diameter allowance, hight allowance, weight allowance and size of defects of domestic ceramic ware
- GB/T 17837-1999 Clothes--Survey methed for human body head round and size designation for headwear
- GB/T 15077-2008 Geometric size measuring methods of precious metals and their alloy materials
- GB/T 15077-1994 Geometric size measuring methods of precious metals and their alloy materials
- GB/T 5373-1994 Measuring method of dimensions and masses parameter for motorcycles and mopeds
- GB/T 5373-2006 Measuring method of dimensions and masses parameter for motorcycles and mopeds
- GB/T 9573-2003 Rubber and plastics hose and hose assemblies-Methods of measurement of dimensions
- GB/T 31556.1-2015 Packaging sacks.Description and method of measurement for dimension.Part 1:Paper sacks
- GB/T 30806-2014 Thermal insulating products for building applications.Determination of dimensional stability under specified temperature and humidity comditions
AENOR, Method of Angular Dimension Measurement
- UNE 18150:1986 METHOD OF DIMENSION MEASURES AND ROTATION PRECISION.
- UNE 115433:1996 EARTH-MOVING MACHINERY. UNITS FOR DIMENSIONS, PERFORMANCE AND CAPACITIES, AND THEIR MEASUREMENT ACCURACIES.
- UNE-EN 61341:2012 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
- UNE-EN 1309-1:1997 Round and sawn timber - Method of measurement of dimensions - Part 1: Sawn timber
United States Navy, Method of Angular Dimension Measurement
Professional Standard - Aerospace, Method of Angular Dimension Measurement
- QJ 3194-2004 Measuring Method of Large Size Roundness Error
- QJ 3002-1998 Measuring method of position degree of large-size circular distribution holes
ES-UNE, Method of Angular Dimension Measurement
- UNE 18150:1987 ERRATUM METHOD OF DIMENSION MEASURES AND ROTATION PRECISION.
- UNE-EN ISO 16663-2:2003/AC:2006 Fishing nets - Method of test for the determination of mesh size - Part 2: Length of mesh (ISO 16663-2:2003/Cor.1:2005)
- UNE-EN ISO 4671:2022 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2022)
- UNE-EN 1167:1996 FEATHER AND DOWN - METHOD OF TEST FOR MEASURING THE SIZES OF QUILTS FILLED WITH FEATHER AND/OR DOWN (Endorsed by AENOR in July of 1996.)
RU-GOST R, Method of Angular Dimension Measurement
- GOST 30534-1997 Means of measurement for linear and angular dimensions. Safety requirements and test methods
- GOST 22091.3-1984 X-ray devices. Methods of measuring radiation field and beam angle of X-radiation
- GOST R 50215-1992 Magnetic tape. Basic dimentions and methods of measurement
- GOST 4.446-1986 System of product-quality indices. Measuring means for linear and angular measurements in mechanical engineering. Nomenclature of indices
- GOST 22091.9-1986 X-ray devices. The methods of measuring effective focus spot size
- GOST 9133-1978 Footwear. Methods of determination of linear sizes
- GOST R 50203.1-1992 Smallwares. Method for determination of linear dimensions
- GOST 938.13-1970 Leather. Method of measuring of weight and linear sizes of samples
- GOST 6033-1980 Basic norms of interchangeability. Involute splined joints with 30° profile angle. Dimensions, tolerances and measurable sizes
- GOST 6033-1951 Basic norms of interchangeability involute splines
- GOST 27505-1987 Video and sound recording on the 25,4mm tape. Parameters and dimensions. Methods of measurement. Packing and marking
- GOST R 50605-1993 Wheelchairs. Methods of determination of overall dimensions, mass, minimum turning radius and minimum turn-around width
- GOST 13762-1986 Measuring means for linear and angular measurements. Marking, packing, transporting and storage
- GOST R 54592-2011 Foot-wear. Methods for determination of linear dimensions
- GOST R 8.907-2015 State system for ensuring the uniformity of measurements. State verification schedule for means measuring on Martens scales hardness and indentation scales hardness
- GOST 29104.7-1991 Industrial fabrics. Methods for determination of mesh sizes
- GOST 25015-1981 Plastics celluar and foam rubber. Method for measuring linear dimensions
- GOST 15136-1978 Refractory articles. Method of damage depth measuring of angles and rihs
- GOST 6943.7-1979 Glass textile products. Methods for determination of linear dimensions, surface and linear density
- GOST R ISO 22651-2017 Footwear. Test methods for insoles. Dimensional stability
- GOST 32825-2014 Automobile roads of general use. Pavements. Methods of measurement of the geometric dimensions of damages
- GOST R EN 12085-2008 Thermal insulating products for applications in building. Methods for measurement of linear dimensions of test specimens
- GOST 33987-2016 Wheeled vehicles. Masses and dimensions. Technical requirements and determination methods
- GOST 22748-1977 Motor vehicles. List of outside dimensions. Methods of measuring
- GOST 8.605-2011 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring of the ellipsometric angles
- GOST 21820.4-1976 Cotton seed. Methods for determination of residual disinfectant content size uniformity and granary pest infestation
- GOST 29104.1-1991 Industrial fabrics. Metods for determination of linear dimensions, linear and surface density
- GOST R IEC 811-1-1-1998 General test methods for insulating and sheathing materials of electric cables. Measurements of thickness and overall dimensions. Tests for determining the mechanical properties
- GOST 29104.10-1991 Industrial fabrics. Method for determination of dimensional change in boiling water
Standard Association of Australia （SAA）, Method of Angular Dimension Measurement
- AS/NZS ISO/IEC 14143.3:2004 Information technology - Software measurement - Functional size measurement - Verification of functional size measurement methods
- AS/NZS ISO/IEC 14143.5:2004 Information technology - Software measurement - Functional size measurement - Determination of functional domains for use with functional size measurement
- AS ISO 10545.2:2020 Ceramic tiles, Method 2: Determination of dimensions and surface quality
- AS ISO 9248:2021 Earth-moving machinery — Units for dimensions, performance and capacities, and their measurement accuracies
- AS 2354:1991 Open top metal cans - Definitions, and determination methods for dimensions and capacities
- AS 4459.2:1999 Methods of sampling and testing ceramic tiles - Determination of dimensions and surface quality
- AS 2282.2:1999 Methods for testing flexible cellular polyurethane - Measurement of dimensions of test specimens
- AS/NZS 4357.1:2005 Structural laminated veneer lumber - Method of test for measurement of dimensions and shape
- AS/NZS ISO/IEC 20926:2022 Software and systems engineering — Software measurement — IFPUG functional size measurement method 2009
- AS/NZS 4266.2(Int):2001 Reconstituted wood-based panels - Methods of test - Dimensions, squareness, flatness and edge straightness
- AS 1141.20.1:2000(R2013)
- AS 2001.5.2:1995 Methods of test for textiles - Dimensional change - Determination of relaxation and hygral properties of woven fabrics
- AS 1141.20.2:2000(R2013)
- AS 2001.5.6:1987 Methods of test for textiles - Dimensional change - Determination of dimensional change of yarns and sewing threads
- AS 1301.014:2019 Methods of test for pulp and paper, Method 014: Size classification of wood chips
- AS 4143.1:1993 Methods of test for fibre ropes - Dimensions, linear density, breaking force and elongation
- AS 2836.4:1998 Methods of testing surgical dressings and surgical dressing materials - Method for the determination of size
- AS/NZS 4266.2:2004 Reconstituted wood-based panels - Methods of test - Dimensions, squareness, flatness and edge straightness of whole panel
- AS 2498.2:1993 Methods of testing rigid cellular plastics - Determination of linear dimensions
YU-JUS, Method of Angular Dimension Measurement
- JUS D.A8.089-1984 Testing of fibre buildlng boards. Measuring of dimensions, straightness of arrisses of boards
- JUS D.E8.006-1987 Door leaves. Measurement of dimensions and ofdefects of sguarenees
- JUS D.E8.006/1-1993 Door leaves - Measurement of dimensions and of defects of squareness - Amendment
- JUS G.S3.101-1991 Rubber and plastics hoses and hose assemblies. Methods of measurement of dimensions
Danish Standards Foundation, Method of Angular Dimension Measurement
- DS 1103-7:1988 Test methods for rigid flat sheets - Determination of dimensions, angular and form deviation
- DS 1103.7:1982 Test methods for rigid flat sheets — Determination of dimensions, angular and form deviations
- DS 2362-3:1994 Measuring equipment-Inclination measuring instruments-Part 3:Electronic inclination measuring elements- dimensions, requirements
- DS/EN 61341:2011 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
- DS 2364:1993 Measuring equipment. Requirements for inspection equipment in dimensional metrology. Auxilliary equipment
- DS/EN ISO 16663-2/AC:2007 Fishing nets - Method of test for the determination of mesh size - Part 2: Length of mesh
- DS/EN ISO 16663-2:2003 Fishing nets - Method of test for the determination of mesh size - Part 2: Length of mesh
- DS/EN ISO 4671:2008 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
- DS/EN 1309-1:2000 Round and sawn timber - Method of measurement of dimensions - Part 1: Sawn timber
- DS/ISO/TR 24496:2013 Office furniture - Office work chairs - Methods for the determination of dimensions
- DS/ISO 4671:1987 Rubber and plastics hose assemblies. Methods of measurement of dimensions
RO-ASRO, Method of Angular Dimension Measurement
- STAS 4443-1988 MEANS FOR MEASURING ANGLES Termlnology
- SR 6926-4-1995 Road vehicles - Test methods - Measurement of interior dimensions
- STAS 8546-1976 LIGNO-CELLULOSIC BOARDS Measurement of dimensions of straightness and of squareness of boards
- STAS 6926/3-1978 Motor vehicles. Testing methods EXTERNAL DIMENSIONAL MEASUREMENT FOR MOTOR VEHICLES AND TRAILERS
Japanese Industrial Standards Committee (JISC), Method of Angular Dimension Measurement
- JIS R 2202:1975 Methods of measuring dimensions of refractory bricks
- JIS Z 8318:2013 Technical product documentation (TPD) -- Indication method of tolerances for linear and angular dimensions
- JIS D 0301:1982 Measuring method of automobile body interior dimensions
- JIS A 1528:1997 Door leaves -- Measurement of dimensions and of defects of squareness
- JIS D 0302:1996 Road vehicles -- Measuring method of exterior dimensions
- JIS P 8122:1976 Testing method for stockigt sizing degree of paper
- JIS X 0135-3:2011 Information technology -- Software measurement -- Functional size measurement -- Part 3: Determination of functional domains for use with functional size measurement and performance verification of functional size measurement methods
- JIS A 1509-2:2008 Test methods for ceramic tiles -- Part 2: Determination of surface quality, dimensions and crook, warp and rectangularity, shape and height of back feet, and angle for trim tiles
- JIS E 4051:2001 Railway rolling stock -- Dimension of carbody and bogie -- Measuring methods
- JIS X 0135-2:2004 Information technology -- Software measurement -- Functional size measurement -- Part 2: Conformity evaluation of software size measurement methods to JIS X 0135-1:1999
- JIS A 8322:2001 Earth-moving machinery -- Units for dimensions, performance and capacities, and their measurement accuracies
- JIS K 6330-1:1998 Testing methods for rubber and plastics hoses -- Part 1: Methods of measurement of dimensions
- JIS A 1158:2014 Method for reducing samples of aggregate to testing size
- JIS R 1655:2003 Test methods for pore size distribution of fine ceramic green body by mercury porosimetry
- JIS K 6330-1:2003 Testing methods for rubber and plastics hoses -- Part 1: Methods of measurement of dimensions for hoses and hose assemblies
- JIS C 6822:2009 Test methods for structural parameters of optical fibers -- Dimensional characteristics
- JIS K 6895:1995 Method for determination of dimension of polytetrafluoroethylene parts
BE-NBN, Method of Angular Dimension Measurement
JP-NDIS, Method of Angular Dimension Measurement
- NDIS 3426-2008 General rule of method for measurement of the size of a crack and thickness by Electric Potential Drop Technique
ZA-SANS, Method of Angular Dimension Measurement
- SANS 14143-3:2004 Information technology - Software measurement - Functional size measurement Part 3: Verification of functional size measurement methods
- SANS 14143-5:2004 Information technology - Software measurement - Functional size measurement Part 5: Determination of functional domains for use with functional size measurement
- SANS 14143-2:2003 Information Technology - Software measurement - Functional size measurement Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1:1998
- SANS 745-1:2008 Structural laminated veneer lumber Part 1: Method of test for measurement of dimensions and shape
SE-SIS, Method of Angular Dimension Measurement
- SIS SS-ISO 4518:1983 Meta I lic coatings - Measurement of coating thickness - Profilometric method
- SIS SS-ISO 7128:1987 Earth-moving machinery - Methods of measuring the dimensions of whole machines with their equipment
- SIS SS-ISO 7077:1984 Measuring methods for building — General principles and procedures for the verification of dimensional compliance
American Society for Testing and Materials (ASTM), Method of Angular Dimension Measurement
- ASTM C134-95(2023) Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
- ASTM F2055-10 Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method
- ASTM D2060-00 Standard Test Methods for Measuring Zipper Dimensions
- ASTM D2060-14e1 Standard Test Methods for Measuring Zipper Dimensions
- ASTM C134-95(2005) Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
- ASTM C134-95(2016) Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
- ASTM F2055-17 Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method
- ASTM D2060-00(2005)e1 Standard Test Methods for Measuring Zipper Dimensions
- ASTM D2060-00(2010) Standard Test Methods for Measuring Zipper Dimensions
- ASTM D2060-14(2022) Standard Test Methods for Measuring Zipper Dimensions
- ASTM D2060-14 Standard Test Methods for Measuring Zipper Dimensions
- ASTM D4825-97(2007) Standard Test Method for Measurement of Curl in Cut-Sized Office Paper
- ASTM D4825-97 Standard Test Method for Measurement of Curl in Cut-Sized Office Paper
- ASTM F2602-08 Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
- ASTM F2602-18 Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
- ASTM E1496-97 Standard Test Method for Neutron Radiographic Dimensional Measurements
- ASTM F2602-08e1 Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
- ASTM F2602-13 Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection lpar;SEC-MALSrpar;
- ASTM D955-21 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
- ASTM E1496-05 Standard Test Method for Neutron Radiographic Dimensional Measurements
- ASTM D6207-03(2019) Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
- ASTM C880/C880M-18e1 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM D8123-22 Standard Test Methods for Measuring the Opening Size of Geohazard Nettings
- ASTM E253-08a Standard Terminology Relating to Sensory Evaluation of Materials and Products
- ASTM E253-09 Standard Terminology Relating to Sensory Evaluation of Materials and Products
- ASTM E253-15a Standard Terminology Relating to Sensory Evaluation of Materials and Products
- ASTM E253-21 Standard Terminology Relating to Sensory Evaluation of Materials and Products
- ASTM E253-00 Standard Terminology Relating to Sensory Evaluation of Materials and Products
- ASTM E253-01 Standard Terminology Relating to Sensory Evaluation of Materials and Products
- ASTM E253-02b Standard Terminology Relating to Sensory Evaluation of Materials and Products
- ASTM E253-02c Standard Terminology Relating to Sensory Evaluation of Materials and Products
- ASTM E253-02 Standard Terminology Relating to Sensory Evaluation of Materials and Products
- ASTM E253-02a Standard Terminology Relating to Sensory Evaluation of Materials and Products
- ASTM E253-07a Standard Terminology Relating to Sensory Evaluation of Materials and Products
- ASTM E253-07 Standard Terminology Relating to Sensory Evaluation of Materials and Products
- ASTM E253-08 Standard Terminology Relating to Sensory Evaluation of Materials and Products
- ASTM E2539-14(2021) Standard Test Method for Multiangle Color Measurement of Interference Pigments
- ASTM E2539-14 Standard Test Method for Multiangle Color Measurement of Interference Pigments
- ASTM E430-97(2003) Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Goniophotometry
- ASTM F2055-00 Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method
- ASTM C880/C880M-09 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM C880/C880M-18 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM C170/C170M-17 Standard Test Method for Compressive Strength of Dimension Stone
- ASTM C170-17(2017) Standard Test Method for Compressive Strength of Dimension Stone
- ASTM C170/C170M-15 Standard Test Method for Compressive Strength of Dimension Stone
- ASTM E1496-05(2010) Standard Test Method for Neutron Radiographic Dimensional Measurements
- ASTM E2684-17 Standard Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages
- ASTM B610-00e1 Standard Test Method for Measuring Dimensional Changes of Metal Powder Specimens
- ASTM F801-96(2008) Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
- ASTM F801-96 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
- ASTM F801-96(2002) Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
- ASTM F801-16 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
- ASTM F801-21 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
- ASTM E2540-08 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle
- ASTM F1152-93 Standard Test Method for Dimensions of Notches on Silicon Wafers
- ASTM F1152-93(2001) Standard Test Method for Dimensions of Notches on Silicon Wafers
- ASTM D955-89(1996) Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
- ASTM D955-00 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
- ASTM A610-79(2004) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
- ASTM D955-08 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
- ASTM A610-79(2009) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
- ASTM D2658-04 Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)
- ASTM D6289-13(2019) Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
- ASTM C303-10 Standard Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation
- ASTM F2055-00(2008) Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method
- ASTM F2055-17(2021) Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gauge Method
- ASTM F1165-98 Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
- ASTM F1165-98(2004) Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
- ASTM D6289-13 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
- ASTM D955-08(2014) Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
- ASTM E1703/E1703M-10(2023) Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
- ASTM F2469-20 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
- ASTM D2658-04(2009) Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)
- ASTM D2658-04(2013) Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes lpar;Box Gage Methodrpar;
- ASTM D628-95(1999) Standard Specification for Asbestos Tubular Sleeving
- ASTM D628-95(2004) Standard Specification for Asbestos Tubular Sleeving
- ASTM D6289-98 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
- ASTM D6289-08 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
- ASTM D668-12 Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation
- ASTM B610-19 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders Intended for Die Compaction
- ASTM D2122-98e1 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
- ASTM E1181-87(1998)e1 Standard Test Methods for Characterizing Duplex Grain Sizes
- ASTM C97-02 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
- ASTM E1181-02 Standard Test Methods for Characterizing Duplex Grain Sizes
- ASTM D1511-00e2 Standard Test Method for Carbon Black-Pellet Size Distribution
- ASTM C97/C97M-18 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
- ASTM D2658-18 Standard Test Method for Determining Dimensions of Fiberboard Boxes
- ASTM D2658-18(2023) Standard Test Method for Determining Dimensions of Fiberboard Boxes
- ASTM D2122-22 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
- ASTM C97/C97M-15 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
- ASTM E1703/E1703M-95(2005) Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
- ASTM E1703/E1703M-10 Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
- ASTM E1703/E1703M-95(2000) Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
- ASTM E1703/E1703M-10(2015) Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
Association Francaise de Normalisation, Method of Angular Dimension Measurement
- NF E10-104:1989 Dimensional measuring methods. Part 5 : cylindrical deviation.
- NF E10-106:1990 Dimensional measuring methods. Part 7 : parallelisme deviation.
- NF B51-240-2*NF EN 324-2:1993 Wood-based panels. Determination of dimensions of boards. Part 2 : determination of squareness and edge straightness.
- NF EN ISO 4671:2022 Tuyaux et flexibles en caoutchouc et en plastique - Méthodes de mesurage des dimensions des tuyaux et de la longueur des flexibles
- NF T47-201:1993 Rubber and plastics hose assemblies. Methods of measurement of dimensions.
- NF E10-108:2000 Dimensional measuring methods - Part 9 : positioning deviation.
- NF E10-105:1990 Dimensional measuring methods. Part 6 : establishment of specified datums.
- NF E58-004*NF ISO 9248:1995 Earth-moving machinery. Units for dimensions, performance and capacities, and their measurement accuracies.
- NF E24-404:2007 Belt drives - V-ribbed belts - Determination of measurement of pitch, angle and cord position.
- NF EN 61341:2012 Méthode de mesure de l'intensité dans l'axe du faisceau et de l'angle (ou des angles) d'ouverture des lampes à réflecteur
- NF ISO 9248:1995 Engins de terrassement - Unités pour exprimer les dimensions, les performances et les capacités , et exactitude de leur mesurage.
- NF G35-012:1971 Textiles. Methods of test for textile floor coverings. Method for measuring the dimensions of rectangular textile floor coverings.
- NF E10-100-1:2002 Geometrical product specification (GPS) - Dimensional measuring methods - Part 1 : general conditions of measurement.
- NF E10-100-1:2021 Geometrical product specification (GPS) - Dimensional measuring methods - Part 1 : general conditions of measurement
- NF EN ISO 16663-1:2009 Filets de pêche - Méthode d'essai pour la détermination des dimensions de la maille - Partie 1 : ouverture de maille
- NF C72-341*NF EN 61341:2012 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
- NF T47-201:2008 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies.
- NF T47-201*NF EN ISO 4671:2022 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
- NF B53-612-1*NF EN 1309-1:1997 Round and sawn timber. Method of measurement of dimensions. Part 1 : sawn timber.
- NF EN 1309-1:1997 Bois ronds et bois sciés - Méthode de mesure des dimensions - Partie 1 : bois sciés.
- NF G36-154-2*NF EN ISO 16663-2:2004 Fishing nets - Method of test for the determination of mesh size - Part 2 : length of mesh
- NF D61-063:2021 Office furniture - Office chairs - Methods for the determination of dimensions
- NF D90-212*NF EN 1167:1996 Feather and down. Method of test for measuring the sizes of quilts filled with feather and/or down.
American National Standards Institute （ANSI), Method of Angular Dimension Measurement
IN-BIS, Method of Angular Dimension Measurement
British Standards Institution (BSI), Method of Angular Dimension Measurement
- PD ISO/IEC TR 14143-3:2003 Information technology. Software measurement. Functional size measurement. Verification of functional size measurement methods
- BS 5921:1980 Methods for determination of size, squareness and straightness of edge of textile floor covering tiles
- BS EN ISO 16663-2:2003 Fishing nets - Method of test for the determination of mesh size - Length of mesh
- BS EN 772-16:2011 Methods of test for masonry units. Determination of dimensions
- BS EN 1309-1:1997 Round and sawn timber - Method of measurement of dimensions - Sawn timber
- BS EN 61341:2010 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
- BS ISO/IEC 20926:2010 Software and systems engineering. Software measurement. IFPUG functional size measurement method 2009
- BS EN 61341:2011 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
- BS 4805:1989 Method for determination of the dimensions of rectangular textile floor coverings
- BS 4682-2:1988 Methods of test for dimensional stability of textile floor coverings - Determination of dimensional changes due to changes in ambient humidity
- BS EN 12479:2002 Wood Poles for Overhead Lines - Sizes - Methods of Measurement and Permissible Deviations
- BS EN 846-11:2000 Methods of test for ancillary components for masonry - Determination of dimensions and bow of lintels
- BS ISO/IEC 20926:2009 Software and systems engineering - Software measurement - IFPUG functional size measurement method 2009
- PD 6528-1990 Method for verifying accuracy of tan delta measurements applicable to capacitors
- BS 7308:1990 Method for presentation of dimensional accuracy data in building constructions
- BS 5920:1980 Method for determination of dimensions of textile floor covering test specimens
- BS ISO 21046:2018 Silk. Test method for determining the size of silk yarns
- BS EN 772-16:2000 Methods of test for masonry units - Determination of dimensions
- BS EN ISO 4671:2008 Rubber and plastics hoses and hose assemblies. Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
- BS EN ISO 4671:2007+A1:2011 Rubber and plastics hoses and hose assemblies. Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
- BS 4140-9:1986 Methods of test for aluminium oxide. Measurement of the angle of repose
- PD 6528:1990 Method for verifying accuracy of tan delta measurements applicable to capacitors
- BS PD ISO/TR 24496:2012 Office furniture. Office work chairs. Methods for the determination of dimensions
- BS ISO 24496:2017 Office furniture. Office chairs. Methods for the determination of dimensions
- BS ISO 24496:2021 Office furniture. Office chairs. Methods for the determination of dimensions
- BS EN 1167:1996 Feather and down - Method of test for measuring the sizes of quilts filled with feather and/or down
- BS 7591-1:1992 Porosity and pore size distribution of materials - Method of evaluation by mercury porosimetry
- BS EN ISO 13385-2:2020 Geometrical product specifications (GPS). Dimensional measuring equipment - Design and metrological characteristics of calliper depth gauges
- BS 5692:1979 Method for measurement of the dimensions of a cylindrical electronic component having two axial terminations
- BS 3962-1:1980 Methods of test for finishes for wooden furniture - Assessment of low angle glare by measurement of specular gloss at 85 °
- BS EN 1309-2:2006 Round and sawn timber - Method of measurement of dimensions - Part 2: Round timber - Requirements for measurement and volume calculation rules
- BS 4736:1985 Method for determination of dimensional changes of fabrics induced by cold-water immersion
CZ-CSN, Method of Angular Dimension Measurement
- CSN 74 6488-1984 Wooden door. Method of measuring dimensions and de- viations from squareness.
- CSN 91 0105-1972 Chairs. Function dimensions and methods of measurements
- CSN 91 0620-1981 Chairs. Function dimensions and methods of measurements
- CSN 74 6488 Cast.1-1987 Wooden doors. Method of door leaf rebate dimensions measuring
- CSN 27 7522-1989 Building, earth-moving machinery and excavators. Methods of measuring the dimensions of whole machines with their equipment
- CSN 20 0300 Cast.16-1984 Measurements of geometrical accuracy of machine tools. Measuring methods. Di-mensional stability of cylindrical test workpieces of the samé series
- CSN 20 0300 Cast.26-1986 Measurements of geometrical accuracy of machine tools.machine tools.Methods of measurement of squareness of an axis to a plane
- CSN 02 7202-1991 Mean of industrial-process measurement and control. Thermometer pockets with internal thread. Basic dimensions
- CSN 25 1020-1978 Connecting dimensions of indicators and gauging heads for length measuring
- CSN 42 0891 Cast.9-1986 Tcsting of sintered products. Method of pore dimension determlnation
- CSN 66 8102 Cast.4-1978 Smokeless powders. Methods of testing. Determination of grain dimensions
Group Standards of the People's Republic of China, Method of Angular Dimension Measurement
- T/CFA 0106011-2021 Photogrammetry of casting dimensions
- T/CKIA 2-2019 Definition and method of anthropometric measurement for bras
- T/GDAQI 74-2021 Test methods for insulating and sheathing materials of electric and optical cables—Automatic measurement of thickness and overall dimensions
- T/CAPPD 8-2021 Definition and method of anthropometric measurements for clothing for physically disabled persons
- T/CMA HG020-2020 Measuring method for flatness of tire test road surface--3-meter ruler method
Professional Standard - Aquaculture, Method of Angular Dimension Measurement
Professional Standard - Agriculture, Method of Angular Dimension Measurement
German Institute for Standardization, Method of Angular Dimension Measurement
- DIN 33402-1:1978 Body dimensions of people; terms and definitions, measuring procedures
- DIN 620-1:1982-06 Rolling bearings; Gauging methods for dimensional and running tolerances
- DIN 332-8:1979 Centre holes 90, form S; dimensions, determination process
- DIN 68100 Bb.4:1978 Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture in the direction of thickness, width and length of particle-board, plywood and fibreboard
- DIN 620-1:1982 Rolling bearings; Gauging methods for dimensional and running tolerances
- DIN 45578-1:1987 Magnet systems for moving coil loudspeakers; definitions, dimensions, methods of measurement
- DIN EN 61341:2012-08 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps (IEC/TR 61341:2010); German version EN 61341:2011 / Note: DIN IEC/TR 61341 (2011-01) remains valid alongside this standard until 2014-07-04.
- DIN EN ISO 16663-2 Berichtigung 1:2006-09 Fishing nets - Method of test for the determination of mesh size - Part 2: Length of mesh (ISO 16663-2:2003); German version EN ISO 16663-2:2003, Corrigenda to DIN EN ISO 16663-2:2003-09; German version EN ISO 16663-2:2003/AC:2006
- DIN EN ISO 16663-2:2003-09 Fishing nets - Method of test for the determination of mesh size - Part 2: Length of mesh (ISO 16663-2:2002); German version EN ISO 16663-2:2003
- DIN EN ISO 4671:2010 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007); German version EN ISO 4671:2007
- DIN EN ISO 4671:2012 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007 + Amd 1:2011); German version EN ISO 4671:2007 + A1:2011
- DIN EN ISO 4671:2022-07 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2022); German version EN ISO 4671:2022
- DIN EN 1309-1:1997-08 Round and sawn timber - Method of measurement of dimensions - Part 1: Sawn timber; German version EN 1309-1:1997
- DIN EN 1309-1:1997 Round and sawn timber - Method of measurement of dimensions - Part 1: Sawn timber; German version EN 1309-1:1997
- DIN 45578-1:1987-02 Magnet systems for moving coil loudspeakers; definitions, dimensions, methods of measurement
- DIN EN 15761:2022 Pre-shaped growing media - Determination of the dimensions measured and bulk density; German and English version prEN 15761:2021
- DIN EN ISO 16663-2:2003 Fishing nets - Method of test for the determination of mesh size - Part 2: Length of mesh (ISO 16663-2:2002); German version EN ISO 16663-2:2003
- DIN EN 1167:1996 Feathers and down - Method of test for measuring the sizes of quilts filled with feather and/or down; German version EN 1167:1996
- DIN IEC/TR 61341:2011 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps (IEC/TR 61341:2010)
- DIN EN 1167:1996-08 Feathers and down - Method of test for measuring the sizes of quilts filled with feather and/or down; German version EN 1167:1996
国家市场监督管理总局、中国国家标准化管理委员会, Method of Angular Dimension Measurement
- GB/T 12673-2019 Motor vehicle main dimensions measurement method
- GB/T 38733-2020 Office furniture—Office chairs—Methods for the determination of dimensions
- GB/T 5373-2019 Measuring method of dimensions and masses parameter for motorcycles and mopeds
- GB/T 38980-2020 Test method for artificial defect sizes of zirconium tube flaw detection comparison samples
American Society of Mechanical Engineers (ASME), Method of Angular Dimension Measurement
- ASME B89.6.2-1973 Temperature and Humidity Environment for Dimensional Measurement
- ASME B89.7.5-2006 Metrological Traceability of Dimensional Measurements to the SI Unit of Length
- ASME B89.7.3.3-2002 Guidelines for Assessing the Reliability of Dimensional Measurement Uncertainty Statements
PL-PKN, Method of Angular Dimension Measurement
- PN E04160-03-1988 Electric cables Test methods Measurement ot thickness and ovcrall dimensions
- PN M55551-08-1986 Metal cutting machin? tools ethods of measurement f dimensional stability of test pieces
- PN M55551-29-1987 Metal cut?ing machin? tools Methods of measurement lest of all dimensions of displacement
NO-SN, Method of Angular Dimension Measurement
- NS 3112-1981 Furniture units - Determination of dimensions, angular and form deviations
International Organization for Standardization (ISO), Method of Angular Dimension Measurement
- ISO/IEC TR 14143-3:2003 Information technology - Software measurement; Functional size measurement - Part 3: Verification of functional size measurement methods
- ISO 8904:1990 Broadleaved sawn timber; sizes; methods of measurement
- ISO 737:1975 Coniferous sawn timber; Sizes; Methods of measurement
- ISO 13059:2011 Round timber - Requirements for the measurement of dimensions and methods for the determination of volume
- ISO 7128:1983 Earth-moving machinery — Methods of measuring the dimensions of whole machines with their equipment
- ISO 9248:1992 Earth-moving machinery; units for dimensions, performance and capacities, and their measurement accuracies
- ISO 6443:1980 Door leaves; Measurement of dimensions and of defects of squareness
- ISO 21046:2018 Silk — Test method for determining the size of silk yarns
- ISO/IEC TR 14143-5:2004 Information technology — Software measurement — Functional size measurement — Part 5: Determination of functional domains for use with functional size measurement
- ISO 27567:2009 Laminated veneer lumber - Measurement of dimensions and shape - Method of test
- ISO/IEC 20926:2009 Software and systems engineering - Software measurement - IFPUG functional size measurement method 2009
- ISO/IEC 14143-2:2002 Information technology - Software measurement; Functional size measurement - Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1:1998
- ISO 4671:2007 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
- ISO 4671:2022 Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
- ISO 16663-2:2003 Fishing nets - Method of test for the determination of mesh size - Part 2: Length of mesh
- ISO 24496:2017 Office furniture - Office chairs - Methods for the determination of dimensions
- ISO 24496:2021 Office furniture - Office chairs - Methods for the determination of dimensions
- ISO 4671:1999 Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions
- ISO 4671:1984 Rubber and plastics hose and hose assemblies; Methods of measurement of dimensions
HU-MSZT, Method of Angular Dimension Measurement
KR-KS, Method of Angular Dimension Measurement
- KS F ISO 9424-2008 Wood-based panels－Determination of dimensions of test pieces
- KS X ISO/IEC 14143-2-2007(2022) Information technology－Software measurement－Functional size measurement－Part 2：Conformity evaluation of software size measurement methods to KS X 2222－1：2001
- KS K ISO 16663-2-2021 Fishing nets — Method of test for the determination of mesh size —Part 2: Length of mesh
- KS M ISO 20873-2020 Footwear — Test methods for outsoles — Dimensional stability
- KS M ISO 4671-2018 Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
- KS K ISO 16663-2-2015 Fishing nets－Method of test for the determination of mesh size－Part 2：Length of mesh
European Committee for Standardization (CEN), Method of Angular Dimension Measurement
- prEN 324-2-1992 Wood-based panels; determination of dimensions of boards; part 2: determination of squareness and edge straightness
- EN 12479:2001 Wood Poles for Overhead Lines - Sizes - Methods of Measurement and Permissible Deviations
- EN ISO 4671:2000 Rubber and Plastics Hoses and Hose Assemblies - Methods of Measurement of Dimensions Supersedes EN 24671:1993; ISO 4671:1999
- EN ISO 4671:2022 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2022)
- EN ISO 4671:2007 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007)
- EN 1309-1:1997 Round and sawn timber - Method of measurement of dimensions - Part 1: Sawn timber
- EN 1167:1996 Feather and down - Method of test for measuring the sizes of quilts filled with feather and/or down
Professional Standard - Automobile, Method of Angular Dimension Measurement
- QC/T 577-1999 Measuring method of passenger compartment interior dimensions
VN-TCVN, Method of Angular Dimension Measurement
- TCVN 5097-1990 Hosiery.Method for determination of dimensions
- TCVN 4307-2005 Coal.Method for determination of undersized or oversized proportions
- TCVN 7353-2003 Motorcycles, mopeds.Measurement method for dimensions and masses
- TCVN 7756-2-2007 Wood based panels-Test methods.Part 2: Determination of dimentions, squareness and edge straightness
Indonesia Standards, Method of Angular Dimension Measurement
- SNI 06-1784-1990 Test method for rosin size
- SNI 13-4716-1998 Determination of particle size distribution by weight of sedimentation in water measurement methods
- SNI 03-6455.4-2000 Methods for measurement of discharge in open channels by triangular weirs
AT-ON, Method of Angular Dimension Measurement
ES-AENOR, Method of Angular Dimension Measurement
Professional Standard - Public Safety Standards, Method of Angular Dimension Measurement
IT-UNI, Method of Angular Dimension Measurement
BR-ABNT, Method of Angular Dimension Measurement
Taiwan Provincial Standard of the People's Republic of China, Method of Angular Dimension Measurement
Professional Standard - Machinery, Method of Angular Dimension Measurement
- JB/T 9151.5-1999 Mehtod of verification for fastenes.Size and geometry.Pins
- JB/T 9151.6-1999 Mehtod of verification for fastenes.Size and geometry.Rivets
- JB/T 9151.4-1999 Mehtod of verification for fastenes.Size and geometry.Washers
- JB/T 9151.7-1999 Mehtod of verification for fastenes.Size and geometry.Rings
- JB/T 8957-1999 Method for verifying accuracy of tan delta measurements applicable to capacitors
- JB/T 9151.2-1999 Mehtod of verification for fastenes.Size and geometry.Wood screws
- JB/T 9151.3-1999 Mehtod of verification for fastenes.Size and geometry.Tapping screws
- JB/T 7690-1995 Engineering machinery Unit and measurement accuracy for dimension and performance
Military Standard of the People's Republic of China-General Armament Department, Method of Angular Dimension Measurement
- GJB 222-1986 Method for measuring the dimensions of the inflated outer rim of aviation tires
- GJB 8671.3-2015 Test methods for metallic cartridges Part 3: Dimensional measurements
- GJB 771.102-1989 Test methods for gunpowder performance - Measurement of shape and dimensions of propellant powder
CY-CYS, Method of Angular Dimension Measurement
International Electrotechnical Commission (IEC), Method of Angular Dimension Measurement
- IEC 60851-2:2009 Winding wires - Test methods - Part 2: Determination of dimensions
- IEC 60851-2:1997 Winding wires -Test methods-Part 2:Determination of dimensions
- IEC 61341:1994 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
- IEC TR 61341:2010 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
- IEC 60534-3-1:2000 Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straigth pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
Professional Standard - Light Industry, Method of Angular Dimension Measurement
- QB/T 4888-2015 Geometric size measuring methods of precious metal jewellery and accessory
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Method of Angular Dimension Measurement
- GB/T 22044-2017 Anthropometric definitions and methods for infant＇s garment
GOSTR, Method of Angular Dimension Measurement
- GOST 5897-1990 Confectionary. Methods for determination of organoleptic quality indices, sizes, net-mass and components
- GOST 25015-2017 Celluar plasticsand and foam rubber. Method for measuring linear dimensions
- GOST 15136-2020 Refractory articles. Methods of damage depth measuring of angles and rihs
European Committee for Electrotechnical Standardization（CENELEC）, Method of Angular Dimension Measurement
- EN 61341:2011 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
- EN 60851-2:2009 Winding wires - Test methods - Part 2: Determination of dimensions
Professional Standard - Non-ferrous Metal, Method of Angular Dimension Measurement
- YS/T 63.7-2006 Carbonaceous materials used in the production of aluminium-Part 7:Determination of apparent density using a dimensions method
工业和信息化部, Method of Angular Dimension Measurement
- JB/T 13379-2018 Method for measuring hot in-situ dimensions of large high-temperature forgings
Malaysia Standards, Method of Angular Dimension Measurement
- MS 1501-2000 Method of test for measuring shrinkage from mould dimensions of moulded plastics
ISUZU - Isuzu Motors Ltd., Method of Angular Dimension Measurement
- ISC-F12-007-1970 Method of Graphite Size Measurement for Chilled Cast Iron (Japanese/English Version)
未注明发布机构, Method of Angular Dimension Measurement
Canadian General Standards Board （CGSB), Method of Angular Dimension Measurement
Lithuanian Standards Office , Method of Angular Dimension Measurement
- LST EN 1309-1-1998 Round and sawn timber - Method of measurement of dimensions - Part 1: Sawn timber
Professional Standard - Textile, Method of Angular Dimension Measurement
- FZ/T 80010-2006 Measurement method of human head circumference in clothing and hat size code
Sichuan Provincial Standard of the People's Republic of China, Method of Angular Dimension Measurement
- DB51/T 1555-2012 Dimensional and geometric tolerance measurement methods for tooling for nuclear fuel assemblies
FI-SFS, Method of Angular Dimension Measurement
Professional Standard - Ferrous Metallurgy, Method of Angular Dimension Measurement
- YB/T 145-1998 Steel tubes.Measurement method of standard artificial defect for flaw detection
- YB/T 145-2013 Die casting and size measurement method of artificial defects on the reference sample pipes
- YB/T 4290-2012 Determination method of the largest grain size grade (ALA grain size) on the metallographic inspection surface
CENELEC - European Committee for Electrotechnical Standardization, Method of Angular Dimension Measurement
- EN 60851-2:1996 Winding wires Test methods Part 2: Determination of dimensions (Incorporates Amendments A1: 1997 and A2: 2003)
UY-UNIT, Method of Angular Dimension Measurement
TR-TSE, Method of Angular Dimension Measurement
- TS 3325-1979 FORMS AND THEIR ARRANGEMENT METHOD FOR MEASUREMENT OF HORIZONTAL ANGLE AND SUMMARIZED SET IN TRANGULATION NETWORK
Society of Automotive Engineers (SAE), Method of Angular Dimension Measurement
- SAE J/ISO 9248-2003 Earth-moving machinery Units for dimensions, performance and capacities, and their measurement accuracies Identical to ISO 9248:1992