ZH
RU
ES
rectangular curve
rectangular curve, Total:184 items.
In the international standard classification, rectangular curve involves: Measurement of volume, mass, density, viscosity, Electrical wires and cables, Fasteners, Aerospace electric equipment and systems, Products of non-ferrous metals, Iron and steel products, Construction materials, Electromechanical components for electronic and telecommunications equipment, Electrical accessories, Telecommunication systems, Sewing machines and other equipment for the clothing industry, Testing of metals, Shipbuilding and marine structures in general, Products of the textile industry, Fluid power systems, Power transmission and distribution networks, Springs, Spools. Bobbins, ELECTRICAL ENGINEERING, Aerospace engines and propulsion systems.
German Institute for Standardization, rectangular curve
- DIN 53014-1:1994 Viscosimetry; capillary viscometers with circular and rectangular cross section for determination of flow curves; principles, concepts, definitions
- DIN 53014-2:1994 Viscometry; capillary viscometers with circular and rectangular cross section for determination of flow curves; systematic deviations, sources and corrections
- DIN 46452:1977-01 Rectangular bare wires for winding wires; dimensions
- DIN 46452:1977 Rectangular bare wires for winding wires; dimensions
- DIN EN 175301-801:2007 Detail Specification: High density rectangular connectors, round removable crimp contacts; German version EN 175301-801:2006
- DIN 53014-1:1994-02 Viscosimetry; capillary viscometers with circular and rectangular cross section for determination of flow curves; principles, concepts, definitions / Note: To be replaced by DIN 53014-1 (2019-03).
- DIN 46465:1977-12 Winding wires, bare rectangular resistance wires; dimensions, resistances
- DIN 43673-1:1982-02 Drilled holes and screw connections for busbars; Rectangular cross section busbars
- DIN 53014-2:1994-02 Viscometry; capillary viscometers with circular and rectangular cross section for determination of flow curves; systematic deviations, sources and corrections
- DIN 46397-11:2005-07 Spools for production of wires - Part 11: Spools with rectangular flanges, Dimensions / Note: Applies in conjunction with DIN 46397-12 (2005-07).*To be replaced by DIN 46397-11 (2018-09).
- DIN EN ISO 12004-2:2009 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2008); English version of DIN EN ISO 12004-2:2009-02
- DIN 46295-2:1981 Terminal board, square shaped with six slit-bolts; accessories
- DIN 48070-2:1976 Triangular and rectangular yokes for overhead power lines
- DIN 46397-12:2005-07 Spools for production of wires - Part 12: Spools with rectangular flanges, technical specifications / Note: Applies in conjunction with DIN 46397-11 (2005-07).*To be replaced by DIN 46397-12 (2018-09).
- DIN EN ISO 12004-2:2021-07 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021); German version EN ISO 12004-2:2021
- DIN 46294:1985 Terminal board, square shaped with six terminals; main dimensions
- DIN 46295-1:1985 Terminal board, square shaped with six slit-bolts; main dimensions
- DIN 46397-11:2005 Spools for production of wires - Part 11: Spools with rectangular flanges, Dimensions
GB-REG, rectangular curve
ESDU - Engineering Sciences Data Unit, rectangular curve
- ESDU 87002 C-1996 Natural frequencies of rectangular singly-curved plates.
- ESDU 87002 C-2011 Natural frequencies of rectangular singly-curved plates
- ESDU 80023 A-1995 Buckling of rectangular specially orthotropic plates.
- ESDU 94005-1994 Buckling of flat rectangular orthotropic plates.
- STRUCT 01.01.19 B-2001 Local buckling and crippling of rectangular tube section struts.
- ESDU 88035 B-1994 Maximum inelastic bending moments and form factors for symmetric bending of beams.
- STRUCT 02.01.24 A-1977 Stiffness after buckling. Flat rectangular plates in compression. (Edges simply-supported.)
- ESDU 89008 C-1990 Normal-force-curve and pitching-moment-curve slopes of forebody-cylinder combinations at zero angle of attack for Mach numbers up to 5.
- STRUCT 02.01.49 A-1979 Buckling stress coefficients for flat rectangular plates tapered in thickness@ under compression.
- STRUCT 02.01.22 A-1983 Buckling stress coefficients for flat rectangular plates in compression. (Edges restrained against rotation - antisymmetric rotation.)
- ESDU 03017 A-2007 Pitching moment curve of wings with leading-edge and trailing-edge high-lift devices deployed at low speeds.
- ESDU 03017-2003 Pitching moment curve of wings with leading-edge and trailing-edge high-lift devices deployed at low speeds
- AERO W.01.01.01 D-1989 Lift-curve slope of swept and tapered wings.
- AERO C.01.01.01 B-1982 Lift-curve slope for single fin and rudder. (i) Body shape merging into fin.
Taiwan Provincial Standard of the People's Republic of China, rectangular curve
CZ-CSN, rectangular curve
National Aeronautics and Space Administration (NASA), rectangular curve
Indonesia Standards, rectangular curve
Japanese Industrial Standards Committee (JISC), rectangular curve
Society of Automotive Engineers (SAE), rectangular curve
- SAE AS34451-2004 CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, RACK AND PANEL, SERIES 2 (CLASS E) FSC 5935;
- SAE AS17143-1997 Terminal, Lug, Crimp Style, Copper, Insulated, Rectangular Tongue, Type II, Class 1 for 105 Degrees C Total Conductor Temperature FSC 5940
- SAE AS17143A-2013 TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, TYPE II, CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
- SAE AS25436-2000 Terminal-Lug, Crimp Style, 90° Upright Type, for Aluminum Aircraft Wire, Class 1
- SAE ARP381-1949(R1991) Hub,Flanged-Spline type wood propeller-No. 10,No. 20
- SAE ARP381A-1949 Hub, Flanged - Spline Type Wood Propeller No. 10, No. 20
RO-ASRO, rectangular curve
- STAS 7941-1990 Line-welded souare and rectangular steel tubes
- STAS 11203-1978 ENAMELLED RECTANGULAR COPPER WIRES Test methods
- STAS 11202/1-1978 ENAMELLED RECTANGULAR COPPER WIRES Enamelled wires with a temperature index of 155, type Cu-PET-155
- STAS 11374/1-1980 COMPLEX GAUGES FOR INSCRIPTION OF RECTANGULAR PROFILE SPLINED SHAFTS AND HUBS Formes and main dimensions
- STAS SR CEI 317-16-1995 Specifications for particular types of winding wires Part 16: Poliester enamelled rectangular copper wire, class 155
- STAS 7394-1966
Korean Agency for Technology and Standards (KATS), rectangular curve
- KS C 3208-2014 Double Cotton Covered Rectangular Copper Wires
- KS C 3125-1974(2020) Double glass -fiber - covered rectangular copper wires
- KS C 3105-2014(2019) Rectangular copper wires for electrical purpose and double cotton covered rectangular copper wires
- KS C IEC 60317-28-2014(2019) Specifications for particular types of winding wires — Part 28: Polyesterimide enamelled rectangular copper wire, class 180
- KS C IEC 60317-18-2014(2019) Specifications for particular types of winding wires — Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120
- KS C IEC 60317-27-2014(2019) Specifications for particular types of winding wires — Part 27: Paper tape covered rectangular copper wire
European Standard for Electrical and Electronic Components, rectangular curve
RU-GOST R, rectangular curve
- GOST 30245-2003 Steel bent closed welded square and rectangular section for building constructions. Specifications
- GOST 30245-1994 Steel bent closed welded square and rectanqular section for building. Specifications
- GOST 30245-2012 Steel bent closed welded square and rectangular section for building. Specifications
- GOST 19711-1974 Enamelled rectanqular winding wires. Method of the flexibility test
- GOST 434-1978 Copper rectangular wire, strips and bars for electrical use. Specifications
AT-ON, rectangular curve
Standard Association of Australia （SAA）, rectangular curve
ES-AENOR, rectangular curve
International Organization for Standardization (ISO), rectangular curve
- ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
- ISO 12004-2:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory
- ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory
American Society for Testing and Materials (ASTM), rectangular curve
- ASTM B324-93 Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
- ASTM B324-01 Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
- ASTM B324-01(2007) Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
- ASTM B324-01(2012) Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
- ASTM B324-01(2016) Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
- ASTM B324-01(2021) Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
- ASTM B48-00(2011) Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
- ASTM B48-00(2021)e1 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
- ASTM B279-98 Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
- ASTM B279-04 Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
- ASTM B279-13 Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
- ASTM B48-00(2005)e1 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
- ASTM B48-00 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
- ASTM B279-13(2019) Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
- ASTM B48-00(2016) Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
- ASTM E2218-23 Standard Test Method for Determining Forming Limit Curves
- ASTM E2218-14 Standard Test Method for Determining Forming Limit Curves
- ASTM E2218-15 Standard Test Method for Determining Forming Limit Curves
- ASTM E2218-02(2008) Standard Test Method for Determining Forming Limit Curves
- ASTM E2218-14e1 Standard Test Method for Determining Forming Limit Curves
- ASTM E2218-02 Standard Test Method for Determining Forming Limit Curves
Defense Logistics Agency, rectangular curve
- DLA DSCC-DWG-86040 REV C-2004 CONNECTOR, RECEPTACLE, ELECTRICAL, RECTANGULAR, SUBMINIATURE, CRIMP REMOVABLE CONTACTS
- DLA DSCC-DWG-86078 REV B-2004 CONNECTORS, PLUG, ELECTRICAL, RECTANGULAR, SUBMINIATURE, CRIMP REMOVABLE CONTACTS
- DLA QPL-28748-69-2006 CONNECTOR, PLUG AND RECEPTACLE, RECTANGULAR, RACK AND PANEL SOLDER TYPE AND CRIMP TYPE CONTACTS, GENERAL SPECIFICATION FOR
- DLA DSCC-DWG-94032 REV A-2000 CONNECTOR, ELECTRICAL, RECTANGULAR, HIGH DENSITY NANOMINIATURE, LOBE KEYED, PLUG, WIRE/HARNESS TERMINATED
- DLA DSCC-DWG-94033-1996 CONNECTORS, ELECTRICAL, RECTANGULAR, HIGH DENSITY NANOMINIATURE, LOBE KEYED, RECEPTACLE, WIRE/ HARNESS TERMINATED
British Standards Institution (BSI), rectangular curve
- BS 4653-2:1970 Specification for paper covered copper conductors - Rectangular conductors
- BS EN 60317-16:1993 Specifications for particular types of winding wires - Polyester enamelled rectangular copper wire, class 155
- BS EN IEC 60317-27-4:2020 Specifications for particular types of winding wires - Paper tape covered rectangular aluminium wire
- 18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
- BS EN ISO 12004-2:2008 Metallic materials - Sheet and strip - Determination of forminglimit
curves - Part 2: Determination of forming-limit curves in the
laboratory
- BS EN ISO 12004-2:2021 Metallic materials. Determination of forming-limit curves for sheet and strip. Determination of forming-limit curves in the laboratory
- BS EN 60317-30:1993 Specifications for particular types of winding wires - Polyimide enamelled rectangular copper wire, class 220
- BS 6663:1986 Methods for determination of crimp rigidity of textured nylon yarns
- BS 4801-2:1972 Specification for varnish-bonded glass-braided copper conductors - Rectangular conductors
- BS EN 60317-17:1993 Specifications for particular types of winding wire - Polyvinyl acetal enamelled rectangular copper wire, class 105
- BS EN 60317-18:1993 Specifications for particular types of winding wires - Polyvinyl acetal enamelled rectangular copper wire, class 120
- 19/30393818 DC BS EN ISO 12004-2. Metallic materials. Sheet and strip. Determination of forming-limit curves. Part 2. Determination of forming-limit curves in the laboratory
- BS EN 13906-3:2014 Cylindrical helical springs made from round wire and bar. Calculation and design. Torsion springs
- BS EN 13906-3:2002 Cylindrical helical springs made from round wire and bar - Calculation and design - Torsion springs
- BS EN 60317-0-5:1993 Specification for particular types of winding wires - General requirements - Glass-fibre braided, bare or enamelled rectangular copper wire
Professional Standard - Aviation, rectangular curve
- HB 7292-1996 CY1 series rectangular wire spring electrical connector
- HB 7293-1996 J series rectangular wire spring electrical connector
- HB 20103-2012 Specification for CRM series hyperboloid socket rectangle connectors
VE-FONDONORMA, rectangular curve
United States Navy, rectangular curve
- NAVY QPL-AS81659-1-2007 CONNECTORS, ELECTRICAL, RECTANGULAR, CRIMP CONTACTS GENERAL SPECIFICATION FOR [Superseded: NAVY QPL-81659 -16 CANC NOTICE 1, NAVY QPL-81659-16, NAVY QPL-81659-15, NAVY QPL-81659-14, NAVY QPL-81659-13, NAVY QPL-81659-12, NAVY QPL-81659-11, NAVY QPL-8165
Professional Standard-Ships, rectangular curve
- CB 1197-1988 CZJ type marine wire spring hole rectangular connector
- CB/T 4215-2013 hydraulic motor of type radial spherical plug low speed and high torque for ship
- CB/T 4450-2017 Marine inner curve radial roller type low speed high torque hydraulic motor
Professional Standard - Light Industry, rectangular curve
- QB 1175-2004 Household sewing machine-Zigzag lockstitch sewing machine head
- QB/T 1175-1991 Household Sewing Machine Curved Seam Lockstitch Machine Head
轻工业部, rectangular curve
- QB 1175-1991 Household sewing machine curved thread lockstitch head
国家发展和改革委员会, rectangular curve
IN-BIS, rectangular curve
SE-SIS, rectangular curve
Danish Standards Foundation, rectangular curve
- DS/ISO 12004-2:2021 Metallic materials – Determination of forming-limit curves for sheet and strip – Part 2: Determination of forming-limit curves in the laboratory
- DS/EN 60317-27/A1:2001 Specifications for particular types of winding wires - Part 27: Paper tape covered rectangular copper wire
- DS/EN 60317-27:1998 Specifications for particular types of winding wires - Part 27: Paper tape covered rectangular copper wire
IT-UNI, rectangular curve
- UNI EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, rectangular curve
- GB/T 24171.2-2009 Metallic materials.Sheet and strip.Determination of forming limit curves.Part 2:Determinations of forming limit curves in laboratory
ES-UNE, rectangular curve
- UNE-EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
- UNE-EN IEC 60317-27-4:2021 Specifications for particular types of winding wires - Part 27-4: Paper tape covered rectangular aluminium wire
- UNE-EN IEC 60317-27-3:2020 Specifications for particular types of winding wires - Part 27-3: Paper tape covered rectangular copper wire
- UNE 41250-4:2016 Test methods for measurement of pavement deflection. Part 4: Curviameter
未注明发布机构, rectangular curve
- DIN EN ISO 12004-2:2021 Metallic materials – Determination of the forming limit curve for sheets and strips – Part 2: Determination of forming limit curves in the laboratory
Professional Standard - Machinery, rectangular curve
- JB/T 5920-2011 Interior curve hydraulic motor.Dimension series for mounting flanges and shaft ends
European Committee for Standardization (CEN), rectangular curve
- EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
- EN ISO 12004-2:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2008)
- HD 555.16 S2-1992 Specifications for particular types of winding wires; part 16: polyester enamelled rectangular copper wire, class 155 (IEC 317-16:1990)
Association Francaise de Normalisation, rectangular curve
Military Standard of the People's Republic of China-General Armament Department, rectangular curve
- GJB 176-1986 General specification for environmentally resistant wire spring hole rectangular electrical connectors
- GJB 176A-1998 Specification for J7 Series Environmentally Resistant Wire Spring Hole Rectangular Electrical Connectors
International Electrotechnical Commission (IEC), rectangular curve
- IEC 60317-27-4:2020 Specifications for particular types of winding wires - Part 27-4: Paper tape covered rectangular aluminium wire
- IEC 60317-18:2020 Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120
CH-SNV, rectangular curve
SAE - SAE International, rectangular curve
- SAE AS17143B-2015 TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, TYPE II, CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
European Committee for Electrotechnical Standardization（CENELEC）, rectangular curve
- HD 42.3 S2-1978 Basic Dimensions of Winding Wires - Part 3: Dimensions of Conductors of Rectangular Copper Winding Wires
- EN 60317-27:2014 Specifications for particular types of winding wires - Part 27: Paper tape covered rectangular copper wire
- EN IEC 60317-27-3:2019 Specifications for particular types of winding wires - Part 27-3: Paper tape covered rectangular copper wire
- EN IEC 60317-27-4:2020 Specifications for particular types of winding wires - Part 27-4: Paper tape covered rectangular aluminium wire
PL-PKN, rectangular curve
- PN-EN ISO 12004-2-2021-08 E Metallic materials -- Determination of forming-limit curves for sheet and strip -- Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
CENELEC - European Committee for Electrotechnical Standardization, rectangular curve
- EN 60317-27:1998 Specifications for Particular Types of Winding Wires Part 27: Paper Tape Covered Rectangular Copper Wire
- EN 60317-16:1994 Specifications for Particular Types of Winding Wires Part 16: Polyester Enamelled Rectangular Copper Wire@ Class 155
General Motors do Brasil, rectangular curve
- GMSA LTP.EF.350-2002 Total Friction Coefficient Determination ( GES) using the Force and Torque versus Angle Curve for fasteners
Professional Standard - Aerospace, rectangular curve
- QJ 2927.2-1997 Detailed specifications for J18 series small rectangle electrical connectors of printed circuit board terminals
AENOR, rectangular curve
- UNE-EN 60317-27:2014 Specifications for particular types of winding wires - Part 27: Paper tape covered rectangular copper wire
European Association of Aerospace Industries, rectangular curve
- AECMA PREN 3218-003-1990 Aerospace Series Connector, Rectangular, Metallic Shells, Screw-Locking Part 003 - Plug for Front-Removable Size 22 Crimp Contacts Product Standard