ZH
RU
ES

cd3 cd

cd3 cd, Total:97 items.

In the international standard classification, cd3 cd involves: Medical equipment, Protective equipment, Installations in buildings, Road vehicle systems, Finances. Banking. Monetary systems. Insurance, Testing of metals, Company organization and management, Heat pumps, Glass, Fasteners, Agricultural machines, implements and equipment, Radiation protection, Fluid power systems, Microbiology, Aids for disabled or handicapped persons, Acoustics and acoustic measurements, Reinforced plastics, Graphical symbols, Buildings, Water quality, Industrial automation systems, Sterilization and disinfection, Vibration and shock with respect to human beings, Information technology (IT) in general, Transport, Vocabularies, Ergonomics, Ventilators. Fans. Air-conditioners, Applications of information technology, Pipeline components and pipelines, Paints and varnishes, Wood technology processes, Iron and steel products, Photography, Plastics, Biology. Botany. Zoology, Environmental protection, Protection against fire, Equipment for petroleum and natural gas industries, Electric road vehicles, Non-destructive testing, Quantities and units, Gears.

Institute of Electrical and Electronics Engineers (IEEE), cd3 cd

ISO/IEC/IEEE CD3 P15026-4 IEEE Draft Internation Standard - Systems and Software Engineering -- Systems and Software Assurance -- Part 4: Assurance in the Life Cycle
ISO/IEC/IEEE P16085/CD3, August 2019 ISO/IEC/IEEE International Draft Standard - Systems and Software Engineering - Life Cycle Processes - Risk Management
IEEE P24748-5-CD3-July 2015 IEEE Draft International Standard - Systems and Software Engineering--Life Cycle Management--Part 5: Software Development Planning
ISO/IEC/IEEE P12207-CD3-1502 ISO/IEC/IEEE Draft International Standard - Systems and software engineering -- Software life cycle processes
IEEE/ISO/IEC P15026-3/CD, December 2021 IEEE/ISO/IEC Draft International Standard - Systems and Software Engineering - Systems and Software Assurance - Part 3: System Integrity Levels

International Organization for Standardization (ISO), cd3 cd

ISO/CD 25539-3 Cardiovascular implants — Endovascular devices — Part 3: Vena cava filters
ISO/CD 15142-3 Implants for surgery — Metal intramedullary nailing systems — Part 3: Connection devices and reamer diameter measurements
ISO/CD 11999-3 PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 3: Clothing
ISO/CD 16890-3 Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured
ISO/CD 4064-3 Water meters for cold potable water and hot water — Part 3: Test report format
ISO/CD 8637-3 Extracorporeal systems for blood purification — Part 3: Plasmafilters
ISO/CD 7396-3 Medical gas pipeline systems — Part 3: Proportioning units for the production of synthetic medical air
ISO/CD 17987-3 Road vehicles — Local Interconnect Network (LIN) — Part 3: Protocol specification
ISO/CD 17442-3 Financial services — Legal entity identifier (LEI) — Part 3: Part 3: verifiable LEIs (vLEIs)
ISO/CD 6506-3 Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
ISO/CD 8804-3 Requirements for the training of Scientific Divers — Part 3: Scientific Diving Project Leader
ISO/CD 19967-3 Air to water Heat pumps — Testing and rating for performance — — Part 3: Combined hot water supply and space heating and/or space cooling
ISO/CD 20492-3 Glass in buildings — Insulating glass — Part 3: Gas concentration and gas leakage
ISO/CD 3506-3 Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress
ISO/CD 7673-3 Agricultural Irrigation — Part 3: Irrigation System Operations
ISO/CD 12749-3 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 3: Nuclear installations, processes and technologies
ISO/CD 8434-3 Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors
ISO/CD 6888-3 Microbiology of the food chain — Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) — Part 3: Detection and MPN technique for low numbers
ISO/CD 20342-3 Assistive products for tissue integrity when lying down — Part 3: Strength and impact
ISO/CD 17208-3 Underwater acoustics — Quantities and procedures for description and measurement of underwater sound from ships — Part 3: Requirements for measurements in shallow water
ISO/CD 75-3 Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
ISO/CD 3864-3 Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs
ISO/CD 17651-3 Simultaneous interpreting — Interpreters’ working environment — Part 3: Requirements and recommendations for interpreting hubs
ISO/CD 7899-3 Water quality — Enumeration of intestinal enterococci — Part 3: Most probable number method
ISO/CD 16094-3 Water quality — Analysis of plastics in water — Part 3: Thermo-analytical methods for waters with low content of natural suspended solids
ISO/CD 14649-3 Industrial automation systems and integration — Physical device control — Data model for computerized numerical controllers — Part 3: Manufacturing features
ISO/CD 11140-3 Sterilization of health care products — Chemical indicators — Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test
ISO/CD 10326-3 ISO/WD 10326-3 Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part 3: Specification of dynamic dummies for z-axis motion
ISO/IEC CD 30105-3 Information technology — IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 3: Measurement framework (MF) and organization maturity model (OMM)
ISO/CD TR 5616-3 Intelligent transport systems — Secure interfaces governance — Part 3: Governance principles
ISO/CD TS 23961-3 Traditional Chinese Medicine — Vocabulary for Diagnostics — Part 3: Abdomen
ISO/IEC CD 5259-3 Artificial intelligence — Data quality for analytics and machine learning (ML) — Part 3: Data quality management requirements and guidelines
ISO/CD TR 21734-3 Public transport — Performance testing for connectivity and safety functions of automated driving bus — Part 3: Service framework and use cases
ISO/CD 14505-3:2023 Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 3: Evaluation of thermal comfort using human subjects
ISO/CD 5222-3:2023 Heat recovery ventilators and energy recovery ventilators — Testing and calculating methods for annual performance factor — Part 3: Sensible recovery annual performance factors of HRV
ISO/CD 18319-3:2023 Fibre reinforced polymer (FRP) reinforcement for concrete structures — Part 3: Classification of FRP sheets
ISO/CD 8203-3:2023 Fibre-reinforced plastics — Non-destructive inspection techniques — Part 3: Active thermography
ISO/CD 28005-3:2023 Ships and marine technology — Electronic port clearance (EPC) — Part 3: Technical standard for administrative and operational data exchanges
ISO/CD 15875-3:2023 Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings
ISO/CD 17438-3:2023 Intelligent transport systems — Indoor navigation for personal and vehicle ITS stations — Part 3: Requirements and specification for indoor positioning reference data
ISO/CD 19403-3:2023 Paints and varnishes — Wettability — Part 3: Determination of the surface tension of liquids using the pendant drop method
ISO/CD 13391-3:2011 Wood and wood-based products — Carbon balance — Part 3: Calculation of the displacementeffects including through substitution
ISO/CD 15630-3:1972 Steel for the reinforcement and prestressing of concrete — Test methods — Part 3: Prestressing steel
ISO/CD 18937-3:2014 Imaging materials — Methods for measuring indoor light stability of photographic prints — Part 3: LED lamp exposure
ISO/CD 4892-3:1975 Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
ISO/CD 4628-3:1980 Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting
ISO/CD 20397-3:2023 Biotechnology — Massively parallel sequencing — Part 3: General requirements and guidance for metagenomics
ISO/CD 14404-3:2011 Calculation method of carbon dioxide emission intensity from iron and steel production — Part 3: Steel plant with electric arc furnace (EAF) and coal-based or gas-based direct reduction iron (DRI) facility
ISO/CD 22899-3:2023 Determination of the resistance to jet fires of passive fire protection materials — Part 3: extended test requirements
ISO/CD 10855-3:2023 Offshore containers and associated lifting sets — Part 3: Periodic inspection, examination and testing
ISO/CD TS 15213-3 Microbiology of the food chain — Horizontal method for the detection and enumeration of Clostridium spp. — Part 3: Detection of Clostridium perfringens
ISO/CD 14577-3:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
ISO/CD 15118-3:2023 Road vehicles — Vehicle to grid communication interface — Part 3: Physical and data link layer requirements
ISO/CD 5149-3:2023 Refrigerating systems and heat pumps — Safety and environmental requirements — Part 3: Installation site
ISO/CD 15708-3:2023 Non-destructive testing — Radiation methods for computed tomography — Part 3: Operation and interpretation
ISO/CD 4266-3:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 3: Measurement of level in pressurized storage tanks (non-refrigerated)
ISO/CD 11357-3:2023 Plastics
ISO/CD 23308-3:2023 Energy efficiency of industrial trucks
ISO/CD 11228-3:2023 Ergonomics
ISO/CD 26622-3:2018 Modular taper interface with ball track system
ISO/CD 15686-3:2023 Buildings and constructed assets — Service life planning — Part 3: Methodologies, data and communication
ISO/CD TR 22785-3:2023 Coatings on plastics and composites — Part 3: Constant climate and alternating climate tests
ISO 80000-3:2019/CD Amd 1: Quantities and units — Part 3: Space and time — Amendment 1
IEC/CD TR 61400-4-3:2023 Wind energy generation systems — Part 4-3: Explanatory notes on IEC 61400-4 - Supportive information for wind turbine gearbox design
ISO/IEC 7816-3:2006/CD Amd 1 Identification cards — Integrated circuit cards — Part 3: Cards with contacts — Electrical interface and transmission protocols — Amendment 1: Additional voltage classes

AASHTO - American Association of State Highway and Transportation Officials, cd3 cd

MDM-3 CD-2005 Model Drainage Manual (U.S. and SI Units) (Revision 3)

US-FCR, cd3 cd

FCR FED H-18-3-CD-3-1987 PIPING, DUCTS AND ELECTRICAL CONDUITS - EMPLACEMENT OF
FCR FED H-18-3-CD-48-1987 FUTURE VERTICAL EXPANSION AND FUTURE ADDITIONS
FCR FED H-08-3-CD-22-1987 FLOW METERS FOR LAUNDRY
FCR FED H-18-3-CD-49-1991 PHYSICAL SECURITY REQUIREMENTS AND OPTIONS (CANCELS FED H-08-3-CD-49)
FCR FED H-08-3-CD-39-1988 LOW SLOPE ROOF SYSTEMS
FCR FED H-08-3-CD-24-1988 SHADES, BLINDS, DRAPERIES, AND CURTAINS
FCR FED H-08-3-CD-35-1988 WINDOWS, EXTERIOR
FCR FED H-18-3-CD-1-1987 VA HOSPITAL BUILDING SYSTEM
FCR FED H-08-3-CD-43-1988 ACCESS TO CONCEALED SPACES, SURVEY OF EXISTING CONDITIONS IN BUILDING RENOVATIONS FOR DESIGN
FCR FED H-08-3-CD-38-1987 PARAPET WALLS, ROOF STRUCTURES, AND WALKWAYS
FCR FED H-08-3-CD-6-1988 DATUM LEVEL
FCR FED H-08-3-CD-2-1987 DOWNSPOUTS
FCR FED H-08-3-CD-26-1987 CANTEEN AREAS, ITEMS TO BE FURNISHED UNDER CONSTRUCTION CONTRACT
FCR FED H-08-3-CD-11-1989 SCREENS
FCR FED H-18-3-CD-5-1995 DRAWING REQUIREMENTS
FCR FED H-18-3-CD-9-1995 PIPE BASEMENTS
FCR FED H-18-3-CD-4-1987 SYMBOL IDENTIFICATION OF BLOCK PLANS, PRELIMINARY DRAWINGS, AND WORKING DRAWINGS
FCR FED H-08-3-CD-7-1988 MARKING AND LIGHTING OBSTRUCTIONS TO AIR NAVIGATION

International Electrotechnical Commission (IEC), cd3 cd

IEC 3D/189A/CD:2011 Standardized product ontology register and transfer by spreadsheets - Part 2: Implementation guide for parcel interchange with IEC CDD

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., cd3 cd

ISO/IEC/IEEE CD 24748-3:2018 Systems and software engineering - life-cycle management - Part 3: Guidelines for the application of ISO/IEC/IEEE 12207 (Software Life cycle processes) (1st Edition)
IEEE P15026-4/CD3-2019 ISO/IEC/IEEE CD3 15026-4 Assurance in the life cycle

IPC - Association Connecting Electronics Industries, cd3 cd

IPC TR-465-3 CD-1996 Evaluation of Steam Aging on Alternative Finishes Round Robin Test Program Phase IIA

US-VA, cd3 cd

VA FED H-08-3-CD-22-1987 FLOW METERS FOR LAUNDRY
VA FED H-08-3-CD-13-1989 TOILETS AND SHOWERS