ZH
RU
ES

thread standard tolerance iso

thread standard tolerance iso, Total:497 items.

In the international standard classification, thread standard tolerance iso involves: Screw threads, Fasteners for aerospace construction, Aerospace fluid systems and components, Cutting tools, Linear and angular measurements, Machine tool systems, Fasteners, Ground service and maintenance equipment, Bottles. Pots. Jars, Coatings and related processes used in aerospace industry, Pipeline components and pipelines, Fruits. Vegetables, Non-ferrous metals, Valves.

PL-PKN, thread standard tolerance iso

PN M02155-1989 Round screw threads Tolerances for gauges
PN M57800-1992 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches. Manufacturing tolerances on the threaded portion
PN M02158-1990 Trapezoidal multi - start screw threads Tolerances for gauges

AT-ON, thread standard tolerance iso

ONORM ISO 965 Teil.3:1983 ISO generalpurpose metric screw threads; Tolerances; Deviations for con- structional threads
ONORM ISO 2903:1984 ISO metric trapezoidal screw threads; tolerances
ONORM ISO 965 Teil.2:1983 ISO general purpose metnc screw threads; Tolerances; Limits ofsizes for general purpose external and internal threads; Medium quality
ONORM ISO 965 Teil.1:1983 ISO generalpurpose metric screw threads; Tolerances; Principles and basic data
ONORM EN 22857-1990 Gmünd thread taps for ISO metric threads of tolerances 4 H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion (ISO 2857:1973 enc. Amd. 1:1984 and Amd. 2:1986)
ONORM M 1505-1974 ISO metric screw thread; fine series with 0,35 mm pitch; nominal dimensions
ONORM M 1501-1997 ISO metric screw thread - Coarse pitch threads and fine pitch threads - Nominal diameter from 1 mm to 1000 mm - Basic profil and nominal sizes
ONORM M 1504-1974 ISO-metric screw thread; fine series with 0,2 mm and 0,25 mm pitch; nominal dimensions
ONORM EN 3052-1994 Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature) / 425 degree C
ONORM M 4320-1984 Sets of taps; sets of 3 taps for metric coarse ISO-threads Ml up to M68

AENOR, thread standard tolerance iso

UNE 17709:2002 ISO general purpose metric screw threads. Tolerances. Deviations for constructional screw threads.
UNE 17708:2002 ISO general purpose metric screw threads. Tolerances. Limits of sizes for general purpose external and internal screw threads. Medium quality.
UNE 16605:1991 GROUND THREAD TAPS FOR ISO METRIC THREADS OF TOLERANCES 4H TO 8H AND 4G TO 6G COARSE AND FINE PITCHES. MANUFACTURING TOLERANCES ON THE THREADED PORTION.
UNE 17707:1978 ISO GENERAL PURPOSE METRIC SCREW THREADS. TOLERANCES. PRINCIPLES AND BASIC DATA.
UNE-EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
UNE-EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013)

NL-NEN, thread standard tolerance iso

NEN 3222-1983 ISO Metric screw thread - Coarse pitch - Tolerances

British Standards Institution (BSI), thread standard tolerance iso

BS ISO 2903:2016 ISO metric trapezoidal screw threads. Tolerances
BS ISO 965-3:2021 Tracked Changes. ISO general purpose metric screw threads. Tolerances. Limit deviations for screw threads
20/30423716 DC BS ISO 965-3. ISO general purpose metric screw threads. Tolerances. Part 3. Limit deviations for screw threads
BS ISO 965-3:1998 ISO general purpose metric screw threads - Tolerances - Deviations for constructional screw threads
BS ISO 965-3:1999 ISO general purpose metric screw threads. Tolerances. Deviations for constructional screw threads
BS 919-3:2007 Screw gauge limits and tolerances – Part 3: Specification for gauges for screw threads of ISO metric form
BS ISO 965-2:1998+A1:2021 ISO general purpose metric screw threads. Tolerances - Limits of sizes for general purpose external and internal screw threads. Medium quality
BS ISO 965-1:2013+A1:2021 ISO general purpose metric screw threads. Tolerances - Principles and basic data
BS ISO 965-5:1998+A1:2021 ISO general purpose metric screw threads. Tolerances - Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
20/30423713 DC BS ISO 965-2 AMD1. ISO general purpose metric screw threads. Tolerances. Part 2. Limits of sizes for general purpose external and internal screw threads. Medium quality
BS ISO 965-4:2021 Tracked Changes. ISO general purpose metric screw threads. Tolerances. Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
20/30423722 DC BS ISO 965-5 AMD1. ISO general purpose metric screw threads. Tolerances. Part 5. Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
20/30423719 DC BS ISO 965-4. ISO general purpose metric screw threads. Tolerances. Part 4. Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
BS 919-3:1968 Specification for screw gauge limits and tolerances - Gauges for ISO metric screw threads
BS ISO 965-1:1999 ISO general purpose metric screw threads. Tolerances. Principles and basic data
BS ISO 965-1:2013 ISO general purpose metric screw threads. Tolerances. Principles and basic data
BS ISO 965-2:1998 ISO general purpose metric screw threads - Tolerances - Limits of sizes for general purpose external and internal screw threads - Medium quality
BS ISO 965-2:1999 ISO general purpose metric screw threads. Tolerances. Limits of sizes for general purpose external and internal screw threads. Medium quality
20/30423710 DC BS ISO 965-1 AMD1. ISO general purpose metric screw threads. Tolerances. Part 1. Principles and basic data
BS EN 2888:2006 Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature) / 425 °C
21/30438772 DC BS ISO 965-1.2 AMD 1. ISO general purpose metric screw threads. Tolerances. Part 1. Principles and basic data
BS ISO 965-4:1998 ISO general purpose metric screw threads - Tolerances - Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
BS ISO 965-5:1998 ISO general purpose metric screw threads - Tolerances - Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
BS ISO 965-4:1999 ISO general purpose metric screw threads. Tolerances. Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
BS ISO 965-5:1999 ISO general purpose metric screw threads. Tolerances. Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
BS EN 3035:1997 Screws, 100 ° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C
BS EN 2859:2006 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature) / 235 °C
BS EN 2885:1996 Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
BS EN 2897:1996 Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature) /235 °C
BS EN 2870:1996 Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature) /315 °C
BS EN 3305:1997 Screws, 100 ° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C
BS EN 3303:1997 Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C
BS EN 2886:1996 Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification - 900 MPa (at ambient temperature)/235 °C
BS EN 3543:1997 Screws, 100 ° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C
BS EN 3038:1997 Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C
BS EN 3381:1997 Screws, 100 ° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature) /315 °C
BS EN 3052:2009 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature) / 425 °C
BS EN 2549:2006 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature) / 315 °C
BS EN 2884:1996 Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C
BS EN 2874:1996 Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature) /315 °C
BS EN 4133:2009 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature) / 425 °C

CZ-CSN, thread standard tolerance iso

CSN 01 4314-1979 Metric Screw Threads ISO. Tolerans System
CSN 22 3007 Za-1986
CSN EN 22 857-1993 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; Manufacturing tolerances on the threaded portion (ISO 2857:1973 incl. Amd 1: 1984 and Amd 2: 1986)
CSN 25 4130-1964 Master gauges for thread calliper gauges. Metric thread M 3 to M 100

SE-SIS, thread standard tolerance iso

SIS SS-ISO 2903:1988 ISO metric trapezoidal screw threads — Tolerances
SIS SMS 1357-1950
SIS SS-ISO 965/3:1984 ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional threads
SIS SS 1747-1979 Screw calliper gauges — Profiles and tolerances for ISO inch screw threads
SIS SMS 1746-1976 Screw ring gauges. Profiles and tolerances. ISO inch screw threads
SIS SS 1924-1988 ISO general purpose metric screw threads with coarse pitch - Screw thread tolerances for metal end of studs
SIS SS 1746-1979 Screw ring gauges — Profiles and tolerances for ISO inch screw threads
SIS SMS 1747-1973 Screw calliper gauges. Profiles and tolerances. ISO inch screw threads
SIS SMS 1486-1950
SIS SS 1748-1979 Screw calliper gauges — Profiles and tolerances for setting plugs for ISO inch screw threads
SIS SMS 1363-1950
SIS SMS 1941-1972 Tolerances for hexagon socket head cap screws Unified screw threads
SIS SS 3193-1988 ISO general purpose metric screw threads — Hot dip galvanizing of external screw threads — Tolerances and limitsof sizes
SIS SS 1745-1979 Screw plug gauges and plain plug gauges — Profiles and tolerances for ISO inch screw threads
SIS SS 3194-1988 ISO inch screw threads- Hot dip galvanizing of external screw threads (UNC threads) - Tolerances and limits of sizes
SIS SS 1925-1988 ISO inch screw threads with coarse pitch - Screw thread tolerances for metal end of studs
SIS SMS 1487-1950
SIS SMS 1745-1973 Screw plug gauges and plain plug gauges. Profiles and tolerances. ISO inch screw threads
SIS SMS 1359-1950
SIS SMS 1748-1973 Screw calliper gauges. Profiles and tolerances for setting plugs. ISO inch screw threads
SIS SMS 3194 E-1974 G?ngtoleranser och gr?nsm?tt vid varmf?rzinkning av utv?ndiga grovg?ngor, UNC
SIS SMS 3193 E-1974 G?ngtoleranser och gran sm?tt vid varmf?rzinkning av utv?ndiga grovg?ngor
SIS SMS 1489-1950
SIS SMS 1358-1950
SIS SS-ISO 2857:1990 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion
SIS SMS 1361-1950
SIS SS-ISO 965/2:1984 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose bolt and nut threads- Medium quality
SIS SS-ISO 965/1:1984 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data
SIS SMS 1493-1950
SIS SMS 1362-1950
SIS SS 2090-1990 ISO system of limits and fits — Standard tolerances
SIS SMS 1495-1950
SIS SMS 1490-1950
SIS SMS 1344-1950
SIS SMS 1494-1950
SIS SMS 1496-1950

International Organization for Standardization (ISO), thread standard tolerance iso

ISO 2903:1977 ISO metric trapezoidal screw threads — Tolerances
ISO 2903:2016 ISO metric trapezoidal screw threads - Tolerances
ISO 2903:1993 ISO metric trapezoidal screw threads; tolerances
ISO 965-3:1998 ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads
ISO 965-3:2021 ISO general purpose metric screw threads - Tolerances - Part 3: Limit deviations for screw threads
ISO 5864:1978 ISO inch screw threads; Allowances and tolerances
ISO 5864:1993 ISO inch screw threads; allowances and tolerances
ISO 2857:1973 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; Manufacturing tolerances on the threaded portion
ISO 965-3:1998/cor 1:2009 ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads; Technical Corrigendum 1
ISO 2857:1973/cor 1:1990 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion; technical corrigendum 1
ISO 965-5:1998/Amd 1:2021 ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance positio
ISO/CD 965-2:2023 ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality
ISO 965-2:1998 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality
ISO 965-4:1998 ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
ISO 965-5:1998 ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO 965-4:2021 ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
ISO/CD 965-4:2023 ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
ISO/CD 965-5:2023 ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO 228-1:1978 Title missing - Legacy paper document
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation
ISO 965-1:1998 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data
ISO 965-2:1998/Amd 1:2021 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality; Amendment 1
ISO 228-1:1982 Pipe threads where pressure-tight joints are not made on the threads; Part 1 : Designation, dimensions and tolerances
ISO 2857:1973/Amd 2:1986 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 2
ISO 2857:1973/Amd 1:1984 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 1
ISO 965-1:2013 ISO general purpose metric screw threads.Tolerances.Part 1: Principles and basic data
ISO 965-2:1973 Title missing - Legacy paper document
ISO 965-1:2013/Amd 1:2021 ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data — Amendment 1
ISO 965-1:1998/cor 1:2009 ISO general-purpose metric screw threads - Tolerances - Part 1: Principles and basic data; Technical Corrigendum 1
ISO 7-1:1994/cor 1:2007 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation; Technical Corrigendum 1
ISO 4144:1979 Stainless steel fittings threaded to ISO 7/1
ISO 49:1983 Malleable cast iron fittings threaded to ISO 7/1
ISO 4145:1986 Non-alloy steel fittings threaded to ISO 7/1

未注明发布机构, thread standard tolerance iso

BS ISO 2903:2016(2020) ISO metric trapezoidal screw threads — Tolerances
BS 919-3:2007(2009) Screw gauge limits and tolerances – Part 3 : Specification for gauges for screw threads of ISO metric form

Association Francaise de Normalisation, thread standard tolerance iso

NF ISO 2903:2016 Filetages métriques trapézoïdaux ISO - Tolérances
NF E03-056:1970 ISO SYSTEM OF TOLERANCES FOR SCREW THREADS. COARSE QUALITY 7H/8 G FOR SCREWS AND BOLTS.
NF L22-201:1984 Bolt, hexagonal head, short thread, close tolerance. ISO thread.
NF L22-024:1967 List of standards for aircraft fasteners. ISO threads to ISO tolerances.
NF E03-617*NF ISO 2903:2016 ISO metric trapezoidal screw threads - Tolerances
NF E03-617:1997 ISO metric trapezoidal screw threads. Tolerances.
NF E03-503:1970 ISO miniature screw threads.tolerances.general plan.
NF ISO 965-3:2021 Filetages métriques ISO pour usages généraux - Tolérances - Partie 3 : écarts limites pour filetages
NF L22-202:1984 Bolt, hexagonal head, short thread, close tolerance with locking hole. ISO thread.
NF L46-313:1979 Screwed sealing plugs, radial sealing. ISO metric thread profile and tolerances.
NF L46-315:1979 Screwed sealing plugs, axial sealing. ISO metric thread profile and tolerances.
NF E03-200*NF ISO 5864:2004 ISO inch screw threads - Allowances and tolerances
NF ISO 5864:2004 Filetages ISO en inches - Jeux et tolérances
NF E03-500/A1*NF ISO 1501/A1:2020 ISO miniature screw threads - Amendment 1 : the figure for the tolerance zone of external thread
NF ISO 1501/A1:2020 Filetages miniatures ISO - AMENDEMENT 1 : la figure pour la zone de tolérance du filetage extérieur
NF E03-054*NF ISO 965-3:2021 ISO general purpose metric screw threads - Tolerances - Part 3 : limit deviations for screw threads
NF L48-111:1973 In-service interchangeability. Standard flanges, ISO metric thread profile and tolerances.
NF L48-110:1974 Standard flanges, ISO metric thread profile and B.N.A.E. tolerances. In-service interchangeability (rech.).
NF L40-105:1973 Connectors, axial sealing. Internal thread bosses, ISO metric thread profile and tolerances.
NF E03-504:1970 ISO miniature screw threads.tolerances.tables for limits of sizes.
NF L22-023:1967 List of standards for aircraft fasteners. ISO threads to B.N.A.E. Tolerances.
NF L22-457:2000 Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H tolerance class.
NF L22-433:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, 4H tolerance class.
NF E03-055:1982 METRIC TRIANGULAR SCREW THREADS ISO SCREW THREAD TOLERANCE SYSTEM. LIMITS OF SIZES TABLES FOR DIAMETERS 40 TO 100 MM.
NF L05-222:1990 Aircraft industry. ISO M thread. Limiting profiles and tolerances (so-called "BNAE tolerances").
NF L22-434:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, 4H tolerance class
NF L22-458:2000 Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, left-hand ISO M or ISO MJ threads, 4H tolerance class.
NF L40-104:1973 Connectors, axial sealing. Male thread fittings, ISO metric thread profile and tolerances.
NF ISO 965-5:2004 Filetages métriques ISO pour usages généraux - Tolérances - Partie 5 : dimensions limites pour filetages intérieurs pour assemblages avec des filetages extérieurs galvanisés à chaud de position de tolérance maximale h avant galvanisation
NF L05-224:1990 Aircraft and aerospace. ISO M thread. Limiting profiles and ISO tolerances for bolts and nuts.
NF L22-432:1987 HEXAGONAL NUTS. NORMAL HEIGHT. NORMAL ACROSS FLATS. ISO LH THREAD. II,4H5H OR 5H,TOLERANCE CLASS ACCORDING TO DIAMETER.
NF L22-431:1987 HEXAGONAL NUTS. NORMAL HEIGHT. NORMAL ACROSS FLATS. ISO RH THREAD. II,4H5H OR 5H,TOLERANCE CLASS ACCORDING TO DIAMETER.
NF L22-451:1987 HEXAGONAL CASTELLATED NUTS. NORMAL HEIGHT. ISO THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.
NF ISO 965-5/A1:2021 Filetages métriques ISO pour usages généraux - Tolérances - Partie 5 : dimensions limites pour filetages intérieurs pour assemblages avec des filetages extérieurs galvanisés à chaud de position de tolérance maximale h avant galvanisation - Ame...
NF L43-586:1972 Plug-in unions, tube end. ISO thread profile and tolerances.
NF L43-587:1973 Rubber hose connections. ISO metric thread profile and tolerances.
NF EN 22857:1990 Tarauds à filets rectifiés pour filetages métriques ISO de tolérance 4H à 8H et 4G à 6G à pas gros et à pas fin - Tolérances d'exécution de la partie taillée
NF E03-050:1982 Triangular profile metric screw threads-ISO system of thread tolerances for diameters of 1 to 355 mm (Arithmetical calculation,diameters and limits of tolerances)
NF E03-057*NF ISO 965-5:2004 ISO general purpose metric screw threads - Tolerances - Part 5 : limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing.
NF L40-103:1974 Connectors, axial sealing. Male thread fittings, ISO metric thread profile and B.N.A.E. Tolerances.
NF E03-057/A1*NF ISO 965-5/A1:2021 ISO general purpose metric screw threads - Tolerances - Part 5 : limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing - Amendment 1
NF ISO 965-4:2021 Filetages métriques ISO pour usages généraux - Tolérances - Partie 4 : dimensions limites pour filetages extérieurs galvanisés à chaud pour assemblages avec des filetages intérieurs de position de tolérance H ou G après galvanisation
NF ISO 965-1:2013 Filetages métriques ISO pour usages généraux - Tolérances - Partie 1 : principes et données fondamentales
NF L22-451:2000 Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter
NF E03-053/A1*NF ISO 965-2/A1:2021 ISO general purpose metric screw threads - Tolerances - Part 2 : limits of sizes for general purpose external and internal screw threads - Medium quality - Amendment 1
NF ISO 965-2/A1:2021 Filetages métriques ISO pour usages généraux - Tolérances - Partie 2 : dimensions limites pour filetages intérieurs et extérieurs d'usages généraux - Qualité moyenne - Amendement 1
NF L44-517:1980 Low pressure connections, ISO metric thread profile and tolerances.
NF L22-436:1987 HEXAGONAL NUTS. REDUCED HEIGHT. NORMAL ACROSS FLATS. ISO THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.
NF L22-435:1987 HEXAGONAL NUTS. REDUCED HEIGHT. NORMAL ACROSS FLATS. ISO RH THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.
NF E03-004-1*NF EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1 : taper external threads and parallel internal threads - Dimensions, tolerances and designation.
NF L22-437:1987 HEXAGONAL NUTS. REDUCED HEIGHT. NORMAL ACROSS FLATS,WITH LOCKING HOLES. ISO RH THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.
NF L22-432:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, II, 4H5H or 5H tolerance class according to diameter.
NF ISO 965-2:1999 Filetages métriques ISO pour usages généraux - Tolérances - Partie 2 : dimensions limites pour filetages intérieurs et extérieurs d'usages généraux. Qualité moyenne.
NF L48-125:1972 In-service interchangeability. Refuelling flanges. (ISO thread profile and tolerances).
NF E03-055:2004 ISO general purpose metric screw threads - Tolerances - Part 4 : limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing.
NF E03-055*NF ISO 965-4:2021 ISO general purpose metric screw threads - Tolerances - Part 4 : limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
NF E03-051*NF ISO 965-1:2013 ISO general purpose metric screw threads - Tolerances - Part 1: principles and basic data
NF L05-223:1990 Aircraft and aerospace. ISO M thread. Limiting profiles and ISO tolerances for manufacturers.
NF L48-215:1972 Mounting interchangeability. Flanges for reinforced tanks. (ISO thread profile and tolerances).
NF L22-438:1987 HEXAGONAL NUTS. REDUCED HEIGHT. NORMAL ACROSS FLATS,WITH LOCKING HOLES. ISO LH THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.
NF L22-435:2000 Nuts, hexagonal, plain, reduced height, normal across flats, ISO M or ISO MJ threads 4H5H or 5H tolerance class according to diameter.
NF E03-051/A1*NF ISO 965-1/A1:2021 ISO general purpose metric screw threads - Tolerances - Part 1 : principles and basic data - AMENDMENT 1
NF L22-431:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, II, 4H5H or 5H tolerance class according to diameter.
NF L22-455:2000 Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H tolerance class.
NF L44-512:1973 Aircraft ground supply. Low pressure connection. ISO metric thread profile and B.N.A.E. Tolerances (rech.)
NF L22-440:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H tolerance class.
NF L22-439:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H tolerance class.
NF L22-436:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L22-462:2000 Aircraft bolts and nuts - Nuts, hexagonal, Plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class
NF L22-461:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class
NF L22-453:1987 HEXAGONAL CASTELLETED NUTS. REDUCED HEIGHT. ISO THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.
NF L40-113:1987 Aerospace fitting joint assembly, radial sealing. Internal thread bosses. ISO metric thread profile and tolerances. Dimensions.
NF L40-112:1987 Aerospace fitting joint assembly, radial sealing. Male thread fittings. ISO metric thread profile and tolerances. Dimensions.
NF L46-322:1980 Protective, metallic, cap, for NF L 40-104 male fittings and similar types. ISO metric thread profile and tolerances.
NF ISO 965-1/A1:2021 Filetages métriques ISO pour usages généraux - Tolérances - Partie 1 : principes et données fondamentales - Amendement 1
NF L22-442:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L22-441:1993 HEXAGONAL NUTS. REDUCED HEIGHT. REDUCED ACROSS FLATS. ISO RH THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.
NF L22-437:2000 Aircraft bolts and nuts - Nuts, hexagonal, palin, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L24-147*NF EN 4136:2010 Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 oC.
NF L24-150*NF EN 4127:2010 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification : 1 100 MPa (at ambient temperature)/425 oC
NF L24-128*NF EN 4132:2010 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 oC
NF L22-441:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L43-310:1973 Swivel connectors. General conditions of interchangeability, ISO metric thread profile and B.N.A.E. Tolerances.
NF L43-315:1973 Swivel connectors. General conditions of interchangeability, ISO metric thread profile and tolerances.
NF L24-105*NF EN 2887:1995 Aerospace series. Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated. Classification : 600 MPa (at ambient temperature) / 425 degrees celsius.
NF L24-103*NF EN 2549:2006 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1100 MPa (at ambient temperature)/315oC
NF L22-438:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L43-210:1973 Cylindrical union. General conditions of interchangeability, ISO metric thread profile and B.N.A.E. Tolerances.
NF L43-215:1973 Cylindrical union. General conditions of interchangeability, ISO metric thread profile and tolerances.
NF L22-434:1987 HEXAGONAL NUTS. NORMAL HEIGHT. NORMAL ACROSS FLATS. ISO LH THREAD. 4H CLASS.
NF L22-433:1987 HEXAGONAL NUTS. NORMAL HEIGHT. NORMAL ACROSS FLATS. ISO RH THREAD. 4H CLASS.
NF L24-101*NF EN 3052:2010 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature)/425 oC
NF L24-153*NF EN 4071:2010 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification : 1 100 MPa (at ambient temperature)/425 oC
NF L24-146*NF EN 4135:2010 Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315oC
NF L22-015*NF EN 4851:2022 Aerospace series - Screw, 100o countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 oC
NF L23-121:1963 Washers with counterbore (for pins with ISO thread).
NF L24-129*NF EN 4133:2009 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in titanium alloy, aluminium IVD coated - Classification : 1 100 MPa (at ambient temperature)/425 oC.
NF L22-443:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L22-444:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L22-453:2000 Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter
NF L22-457:1987 HEXAGONAL CASTELLATED NUTS. NORMAL HEIGHT. ISO RH THREAD. 4H CLASS.

TH-TISI, thread standard tolerance iso

TIS 2410-2008 Iso inch screw threads.allowances and tolerances
TIS 2361-2007 Iso metric trapezoidal screw threads.tolerances
TIS 377-1981 Standard for tolerances for bolts, screws, nuts and studs
TIS 339.5-2008 Iso general purpose metric screw threads.tolerances.part 5: limits of sizes for internal screw threads to mate with hot.dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
TIS 339.1-3-1980 Standard for tolerances for iso general purpose metric screw threads.part Ⅰ: principles and basic data.part Ⅱ: limits of sizes for commercial bolt and nut thread.medium quality.part Ⅲ: deviations for constructional threads
TIS 339.4-2008 Iso general purpose metric screw threads.tolerances.part 4: limits of sizes forhot.dip galvanized external screwthreads to mate with internal screw threads tapped with to leranceposition hor gaftergalvanizing
TIS 159-1975 Standard for general purpose iso metric screw threads and selected sizes for screws, bolts and nuts
TIS 2197-2004 Non.alloy steel fittings threaded to iso 7/1

Danish Standards Foundation, thread standard tolerance iso

DS/ISO 5864:1995 ISO inch screw threads - Allowances and tolerances
DS/ISO 965-3/Corr. 1:2009 ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads
DS/ISO 965-3:1999 ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads
DS/ISO 2903:1995 ISO metric trapezoidal screw threads - Tolerances
DS/ISO 965-2:1999 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality
DS/ISO 965-4:1999 ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
DS/ISO 965-5:1999 ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
DS/ISO 965-1:2013 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data
DS/ISO 228/1:1983 Pipe threads where pressure-tight joints are not made on the threads. Part 1: Designation, dimensions and tolerances
DS/ISO 965/1:1981 ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
DS/EN 2859:2006 Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series – Classification: 1 100 MPa (at ambient temperature) / 235 °C
DS/EN 4127:2009 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C

German Institute for Standardization, thread standard tolerance iso

DIN ISO 965-3:1999-11 ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional threads (ISO 965-3:1998) / Note: To be replaced by DIN ISO 965-3 (2021-01).
DIN ISO 965-3:2021-01 ISO general purpose metric screw threads - Tolerances - Part 3: Limit deviations for screw threads (ISO/DIS 965-3:2020); Text in German and English / Note: Date of issue 2020-12-04*Intended as replacement for DIN ISO 965-3 (1999-11).
DIN 14-3:1987-02 ISO-metric screw thread; screw threads below 1 mm diameter; tolerances
DIN 13-52:2017-05 ISO general purpose metric screw threads - Part 52: Multi-start thread tolerances and deviation of profile
DIN 8140-2:2005-08 Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances
DIN 14-3:1987 ISO-metric screw thread; screw threads below 1 mm diameter; tolerances
DIN 802-5:1997-02 Tolerances on the threaded portion of tape - Part 5: Ground threaded taps for ISO metric thread; threads for interference fits according to DIN 8141-1, coarse and fine pitches; manufacturing tolerances on the threaded portion
DIN 802-4:2012 Ground thread taps for ISO metric threads of tolerances 7G, 8G and special tolerances, coarse and fine pitches - Part 4: Manufacturing tolerances on the threaded portion
DIN 103-3:1977 ISO Metric Trapezoidal Screw Thread; Allowances and Tolerances for Trapezoidal Screw Threads of General Purpose
DIN ISO 965-3:1999 ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional threads (ISO 965-3:1998)
DIN 103-3:1977-04 ISO Metric Trapezoidal Screw Thread; Allowances and Tolerances for Trapezoidal Screw Threads of General Purpose
DIN 802-4:2012-01 Ground thread taps for ISO metric threads of tolerances 7G, 8G and special tolerances, coarse and fine pitches - Part 4: Manufacturing tolerances on the threaded portion
DIN 13-50:2017-05 ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw threads
DIN ISO 965-2:1999-11 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality (ISO 965-2:1998) / Note: To be amended by DIN ISO 965-2/A1 (2021-01).
DIN ISO 965-2 Berichtigung 1:2017-03 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality (ISO 965-2:1998), Corrigendum to DIN ISO 965-2:1999-11
DIN 802-5:1997 Tolerances on the threaded portion of tape - Part 5: Ground threaded taps for ISO metric thread; threads for interference fits according to DIN 8141-1, coarse and fine pitches; manufacturing tolerances on the threaded portion
DIN 802-4:1994 Ground thread taps for ISO metric threads of tolerances 7G, 8G and special tolerances, coarse and fine pitches - Part 4: Manufacturing tolerances on the threaded portion
DIN 8140-2 Berichtigung 1:2017-03 Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances, Corrigendum to DIN 8140-2:2005-08
DIN 13-52:1999 ISO general purpose metric screw threads - Part 52: Multi-start thread tolerances and deviation of profile
DIN 13-52:2017 ISO general purpose metric screw threads - Part 52: Multi-start thread tolerances and deviation of profile
DIN 8140-2:2005 Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances
DIN 13-51:2013-10 ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit) - tolerances, limit deviations, limits of sizes
DIN ISO 965-4:2021-01 ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (ISO/DIS 965-4:2020); Text in Germ...
DIN ISO 965-4:2002-05 ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (ISO 965-4:1998) / Note: To be rep...
DIN ISO 965-5:2002 ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing (ISO 965-5:1998)
DIN EN 22857:1990 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion (ISO 2857:1973 incl. AMD 1:1984 and AMD 2:1986); german version EN 22857:1989
DIN ISO 965-5:2002-05 ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing (ISO 965-5:1998) / Note: To b...
DIN 13-50:2017 ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw threads
DIN 13-50:1999 ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw threads
DIN ISO 965-2/A1:2021-01 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality - Amendment 1 (ISO 965-2:1998/DAM 1:2020); Text in German and English / Note: Date of issue 2020-12...
DIN 13-25:2005-08 ISO general purpose metric screw threads - Part 25: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 182 mm to 250 mm
DIN 13-24:2005-08 ISO general purpose metric screw threads - Part 24: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 112 mm to 180 mm
DIN 13-23:2005-08 ISO general purpose metric screw threads - Part 23: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 53 mm to 110 mm
DIN 13-20:2000-08 ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the prefered tolerance classes; nominal sizes from 1 mm to 68 mm
DIN 13-26:2005-08 ISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 252 mm to 1000 mm
DIN 13-22:2005-08 ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 25 mm to 52 mm
DIN 13-21:2005-08 ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 1 mm to 24,5 mm
DIN ISO 965-4:2002 ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (ISO 965-4:1998)
DIN ISO 965-4:2021 ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (ISO/DIS 965-4:2020); Text in German
DIN EN 22857:1990-07 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion (ISO 2857:1973 incl. AMD 1:1984 and AMD 2:1986); german version EN 22857:1989
DIN 802-3:2016 Tolerances on the threaded portion of taps - Part 3: Ground taps for pipe thread (G) according to DIN EN ISO 228-1 and pipe thread (Rp) according to DIN EN 10226-1 - Manufacturing tolerances on the threaded portion
DIN 802-3:2008 Tolerances on the threaded portion of taps - Part 3: Ground taps for pipe thread (G) according to DIN EN ISO 228-1 and pipe thread (Rp) according to DIN EN 10226-1 - Manufacturing tolerances on the threaded portion
DIN 103-4:1977-04 ISO Metric Trapezoidal Screw Thread; Nominal Dimensions
DIN 802-3:2016-03 Tolerances on the threaded portion of taps - Part 3: Ground taps for pipe thread (G) according to DIN EN ISO 228-1 and pipe thread (Rp) according to DIN EN 10226-1 - Manufacturing tolerances on the threaded portion
DIN ISO 965-5/A1:2021-01 ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing - Amendment 1 (ISO 965-5:1998...
DIN 13-51:2005 ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit); tolerances, limit deviations, limits of sizes
DIN 13-51:2013 ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit) - tolerances, limit deviations, limits of sizes
DIN 13-51:2012 ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit); tolerances, limit deviations, limits of sizes
DIN 13-26:2005 ISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 252 mm to 1000 mm
DIN 13-21:2005 ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 1 mm to 24,5 mm
DIN 13-22:2005 ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 25 mm to 52 mm
DIN 14-2:1987-02 ISO-metric screw thread; screw threads below 1 mm diameter; nominal dimensions
DIN 8141-1:1993-07 ISO-metric screw threads; coarse pitch threads and fine pitch threads for interference fits in aluminium cast alloys; nominal diameter from 5 mm to 16 mm; nominal sizes, tolerances and limits of sizes
DIN 13-24:2005 General purpose ISO metric screw threads - Part 24: Limits of sizes for fine pitch threads with the prefered tolerance classes - Nominal diameter from 112 mm to 180 mm8
DIN 13-25:2005 General purpose ISO metric screw threads - Part 25: Limits of sizes for fine pitch threads with the prefered tolerance classes - Nominal diameter from 182 mm to 250 mm
DIN 13-23:2005 General purpose ISO metric screw threads - Part 23: Limits of sizes for fine pitch threads with the prefered tolerance classes - Nominal diameter from 53 mm to 110 mm
DIN 13-8:1999-11 ISO general purpose metric screw threads - Part 8: Nominal sizes for 3 mm fine pitch threads; nominal diameter from 28 mm to 300 mm
DIN 13-3:1999-11 ISO general purpose metric screw threads - Part 3: Nominal sizes for 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mm
DIN 13-4:1999-11 ISO general purpose metric screw threads - Part 4: Nominal sizes for 0,75 mm fine pitch threads; nominal diameter from 5 mm to 110 mm
DIN 13-6:1999-11 ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm
DIN 13-7:1999-11 ISO general purpose metric screw threads - Part 7: Nominal sizes for 2 mm fine pitch threads; nominal diameter from 17 mm to 300 mm
DIN 13-7 Berichtigung 1:2019-08 ISO general purpose metric screw threads - Part 7: Nominal sizes for 2 mm fine pitch threads; Nominal diameter from 17 mm to 300 mm; Corrigendum 1
DIN ISO 965-1/A1:2021-01 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data - Amendment 1 (ISO 965-1:2013/DAM 1:2020); Text in German and English / Note: Date of issue 2020-12-04*Intended as an amendment to DIN ISO 965-1 (2017-05).
DIN ISO 965-1:2017 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data (ISO 965-1:2013)
DIN ISO 965-2:1999 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality (ISO 965-2:1998)
DIN 802-6:2003 Manufacturing to tolerances on the threaded portion of screwing taps - Part 6: Ground taps for tapped holes (EG) for wire thread inserts as in DIN 8140 for ISO metric coarse and fine pitch threads
DIN 13-20:2000 ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the prefered tolerance classes; nominal sizes from 1 mm to 68 mm
DIN 802-6:2003-07 Manufacturing to tolerances on the threaded portion of screwing taps - Part 6: Ground taps for tapped holes (EG) for wire thread inserts as in DIN 8140 for ISO metric coarse and fine pitch threads
DIN EN ISO 228-1:2003-05 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003
DIN 13-11:1999-11 ISO general purpose metric screw threads - Part 11: Nominal sizes for 8 mm fine pitch threads; nominal diameter from 130 mm to 1000 mm
DIN 13-9:1999-11 ISO general purpose metric screw threads - Part 9: Nominal sizes for 4 mm fine pitch threads; nominal diameter from 40 mm to 300 mm
DIN 13-10:1999-11 ISO general purpose metric screw threads - Part 10: Nominal sizes for 6 mm fine pitch threads; nominal diameter from 70 mm to 500 mm
DIN 13-19:1999-11 ISO general purpose metric screw threads - Part 19: Nominal profiles
DIN ISO 965-1:1999 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data (ISO 965-1:1998)
DIN EN ISO 228-1 Supplement 1:2003 Pipe threads where pressure-tight joints are not made on the threads-part 1:dimensions,tolerances and designation-limits of size; English version of DIN EN ISO 228-1 Supplement 1:2003-05
DIN ISO 965-1/A1:2021 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data - Amendment 1 (ISO 965-1:2013/DAM 1:2020); Text in German and English
DIN EN 2859:2008 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series - Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 2859:2006
DIN 2174:1998 Cold-forming taps for ISO metric coarse pitch thread M2 to M16 and ISO metric fine pitch thread M3 × 0,25 to M24 × 2 - Dimensions
DIN 431:2013-05 Pipe nuts with thread according to DIN EN ISO 228-1
DIN ISO 286-2:1990 ISO system of limits and fits; tables of standard tolerance grades and limit deviations for holes and shafts; identical with ISO 286-2:1988
DIN 65527:1984 Aerospace; hexagon bolts, close tolerance, with MJ-thread, short thread, steel, nominal tensile stregth 1100 MPa, for temperatures up to 235 °C
DIN 65525:2020 Aerospace series - Bolts, hexagon, close tolerance, with MJ-thread, short thread, steel, nominal tensile strength 1100 MPa, for temperatures up to 235 ？C; Text in German and English
DIN 65527:1984-07 Aerospace; hexagon bolts, close tolerance, with MJ-thread, short thread, steel, nominal tensile stregth 1100 MPa, for temperatures up to 235 °C
DIN 13-5:1999-11 ISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads; nominal diameter from 7,5 mm to 200 mm
DIN 2279:2001 Geometrical Product Specifications (GPS) - Gauges for ISO metric screw threads - Gauging of the internal and external threads; Survey, inscription, marking, application
DIN 158-1:1997-06 Metric external taper screw threads and mating internal parallel screw threads - Part 1: Nominal sizes, limit deviations, limits of size and verification
DIN EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013); German version EN ISO 12818:2015
DIN 65269:1987-03 Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
DIN 65520:1984 Aerospace; pan head bolts, close tolerance, with ribbed TORQ-SET (ACR) recess an MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
DIN 65439:1984 Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1250 MPa, for temperatures up to 235 °C
DIN 65525:2021-07 Aerospace series - Bolts, hexagon, close tolerance, with MJ-thread, short thread, steel, nominal tensile strength 1 100 MPa, for temperatures up to 235 °C; Text in German and English
DIN 65438:1993-12 Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, short thread length, in titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 13-2:1999-11 ISO general purpose metric screw threads - Part 2: Nominal sizes for 0,2 mm, 0,25 mm and 0,35 mm fine pitch threads; nominal diameter from 1 mm to 50 mm

CH-SNV, thread standard tolerance iso

IL-SII, thread standard tolerance iso

S.I.T.D.638-1967 ISO METRIC SCREW THREAD: TOLERANCES AND FITS

YU-JUS, thread standard tolerance iso

JUS M.B0.600-1985 Taps for ISO metric threads. Tolerances on the threadedportion
JUS M.B0.270-1977 ISO Metric trapezoidal screw threads. System of tolerances
JUS M.B0.510-1981 Metric screw thread with trianguiar ISO—profile. Gauges for extemal threads. Tolerances for thread gauges
JUS M.B0.514-1981 ISO Metric trapezoidal screw threads. Gauges for external and internat screw threads. Tolerances far thread gauges
JUS M.B0.511-1981 Metne screw thread with tnangular li>U-protile. bauges tor internat tnreaas. loierances ror znreaa gauges
JUS M.B0.250-1987 Toleran?es of metric screvv thread with triangular ISO-profile. Limit vaiues of deviations for threads vvith and without clearance
JUS K.T3.174-1985 GO screw plug gauges for ISO Metric Screw Threads from 1 to and including 50 mm nominal diame- ter
JUS K.T3.171-1985 GO screvv gauging members for ISO Metric Screw Threads from 1 to and including 50 mm nominal dia- etar
JUS K.T3.172-1985 NOT GO screw plug gauges for ISO Metric Screw Threads from 1 to and including 50 mmliorminal diameter

VN-TCVN, thread standard tolerance iso

TCVN 2255-2008 ISO metric trapezoidal screw threads.Tolerances
TCVN 4683-3-2008 ISO general purpose metric screw threads.Tolerances.Part 3: Deviations for constructional screw threads
TCVN 4683-5-2008 ISO general purpose metric screw threads.Tolerances.Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
TCVN 4683-4-2008 ISO general purpose metric screw threads.Tolerances.Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
TCVN 4683-2-2008 ISO general purpose metric screw threads.Tolerances.Part 2: Limits of sizes for general purpose external and internal screw threads.Medium quality
TCVN 4683-1-2008 ISO general purpose metric screw threads.Tolerances.Part 1: Principles and basic data
TCVN 7705-2007 Malleable cast iron fittings threaded to ISO 7-1

IT-UNI, thread standard tolerance iso

UNI ISO 2903:1978
UNI 7456-1975
UNI 5595-1976 Slotted and castle hexagon nuts. Iso metric coarse thread. Product grade c.
UNI 5592-1968
UNI ISO 2904:1978
UNI 4535-1964
UNI 5546-1965 Iso metric threads with triangular profile. Limits of size of the coarse class threads with 7h/8g tolerance, for bolts, screws and nuts.
UNI 5544-1965 Iso metric threads with triangular profile. Limits of size of the close class threads with 4h5h/4h tolerance, for bolts, screws and nuts.
UNI 5593-1976 Slotted and castle hexagon nuts. Iso metric coarse and fine thread. Product grade a.
UNI 7324-1974 ISO metric threads with triangular profile. Tolerance system for interference fits.
UNI 5597-1965
UNI 5545-1965 Iso metric threads with triangular profile. Limits of size of the medium class thrads with 6h/6g tolerance, for bolts, screws and nuts.
UNI 5541-1965 Iso metric screw threads with triangular profile, pitch 0,35 mm and more. Tollerance system for clearance fits.
UNI 4536-1964
UNI 5588-1965
UNI 6982-1971 Measuring instruments. Setting plugs for adjustable go and not go screw ring gauges for ISO metric threads with nominal diameter above 1,5 to 50 mm.
UNI 6984-1971 Measuring instruments. Go and not go screw plug gauges and go and not go check plugs for new solid go and not go screw ring gauges for ISO metric threads with nominal diameter above 1,5 to 50 mm.
UNI 7473-1975 Prevailing torque-type hexagon nuts with polyammide ring. ISO metric coarse and fine thread. Product grade a.

IN-BIS, thread standard tolerance iso

IS 4218 Pt.5-1979
IS 7008 Pt.4-1988
IS 4218 Pt.4-1976
IS 6173 Pt.1-1992 Screqing taps. Dimensions and tolerances of threaded portion. Part 1: For ISO metric screw threads (First Revision)
IS 12186-1987

RO-ASRO, thread standard tolerance iso

STAS 8164-1984 ISO GENERAL PURPOSE METRIC SCREW THREADS Tolerances Classes 6H/6g
STAS SR EN 22857-1996 Ground thread taps for ISO metric threads of tolerances 4H to 8H and AG to 6G coarse and fine pitches. Manufacturing tolerances on the threaded portion
STAS 981-1974 ISO general purpose metric screw threads NOMINAL DIAMETERS AND PITCHES
STAS 8417/2-1990 Gauges and reference gauges for iso general purpose metric screw threads manufacturing and wear tolerances
STAS 10463/1-1975 ISO trapezoidal screw threads SOLID GAUGES AND REFERENCE GAUGES FOR TRAPEZOIDAL SCREW THREADS Manufacturing and wear tolerances
STAS 8151-1988 NON-ADJUSTABLE GAUGES AND REFERENCE GAUGES FOR ME TRIC SCREW THREAD WITH INTERFERENCE FITS Manufacturing and wear tolerances

CU-NC, thread standard tolerance iso

NC 06-69-1969 ISO metric screw threads. Tolerances. Principies and basic data
NC 06-70-1969 ISO metric screw threads. Tolerances. Limits of sizes for medium quality commercial bolt and nut threads
NC 16-46-1981 Interchangeability Basic Standards. Metric Thread. Clearance Fit. Tolerances

ZA-SANS, thread standard tolerance iso

SANS 1700-2-7:2003 Fasteners Part 2: Screw threads Section 7: ISO general purpose metric screw threads - Tolerances - Deviations for constructional screw threads
SANS 1700-2-16:1996 Fasteners Part 2: Screw threads Section 16: ISO metric trapezoidal screw threads - Tolerances
SANS 1700-2-19:2003 Fasteners Part 2: Screw threads Section 19: ISO general purpose metric screw threads - Tolerances - Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
SANS 1700-2-20:2003 Fasteners Part 2: Screw threads Section 20: ISO general purpose metric screw threads - Tolerances - Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvaniz
SANS 1700-2-17:1996 Fasteners Part 2: Screw threads Section 17: ISO metric trapezoidal screw threads - Basic dimensions
SANS 1700-2-5:2003 Fasteners Part 2: Screw threads Section 5: ISO general purpose metric screw threads - Tolerances - Principles and basic data
SANS 14:1994 Malleable cast iron fittings threaded to ISO 7-1
SANS 1700-2-14:1996 Fasteners Part 2: Screw threads Section 14: ISO metric trapezoidal screw threads - Basic profile and maximum material profiles

BR-ABNT, thread standard tolerance iso

ABNT NBR ISO 2857 Versão Corrigida 1:2011 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches - Manufacturing tolerances on the threaded portion
ABNT P-NB-183-1970

NO-SN, thread standard tolerance iso

NS 5374-1977 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches - Manufacturing tolerances on the threaded portion

Japanese Industrial Standards Committee (JISC), thread standard tolerance iso

JIS B 0209-3 ERRATUM 1:2002 ISO general purpose metric screw threads -- Tolerances -- Part 3: Deviations for constructional screw threads (Erratum 1)
JIS B 0209-3:2001 ISO general purpose metric screw threads -- Tolerances -- Part 3: Deviations for constructional screw threads
JIS B 0217-2:2013 ISO metric trapezoidal screw threads.Tolerances .Part 2: Limits of sizes for external and internal screw thread
JIS B 0209-5:2001 ISO general purpose metric screw threads -- Tolerances -- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
JIS B 0217-1:2013 ISO metric trapezoidal screw threads.Tolerances .Part 1: Principles and basic data
JIS B 0209-4:2001 ISO general purpose metric screw threads -- Tolerances -- Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
JIS B 0209-2:2001 ISO general purpose metric screw threads -- Tolerances -- Part 2: Limits of sizes for general purpose external and internal screw threads -- Medium quality
JIS B 0209-5 ERRATUM 1:2002 ISO general purpose metric screw threads -- Tolerances -- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing (Erratum 1)
JIS B 0209-1:2001 ISO general purpose metric screw threads -- Tolerances -- Part 1: Principles and basic data
JIS B 0401-2:1998 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts

BE-NBN, thread standard tolerance iso

European Committee for Standardization (CEN), thread standard tolerance iso

EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation ISO 228-1: 2000
EN 22857:1989 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion (ISO 2857:1973 encl. AMD 1:1984 and AMD 2:1986)
EN 2859:2006 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series - Classification: 1100 MPa (at ambient temperature) / 235 °C
EN 2859:1995 Aerospace Series - Bolts, Normal Hexagonal Head, Close Tolerance Normal Shank, Short Thread, in Alloy Steel, Cadmium Plated - Classification: 1100 MPa (at Ambient Temperature)/235 Degrees C
EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage
EN 2888:2006 Aerospace series - Metric Bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C
EN 2888:1995 Aerospace Series - Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Short Thread, in Corrosion Resisting Steel, Passivated - Classification: 600 MPa (at Ambient Temperature) /425 Degrees C
EN 2870:1996 Aerospace Series - Bolts, Normal Bihexagonal Head, Close Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, MoS2 Lubricated - Classification: 1100 MPa (at Ambient Temperature) /315 Degrees C
prEN 3052-1992 Aerospace series; bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa; (at ambient temperature)/425 C
FprEN 4851-2021 Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C
EN 4128:2016 Aerospace series - Bolts@ normal hexagonal head@ coarse tolerance shank@ short thread@ in heat resisting nickel base alloy@ aluminium IVD coated - Classification: 1 250 MPa (at ambient temperature) / 425 ��

FI-SFS, thread standard tolerance iso

SFS 2003-1966
SFS 2004-1966
SFS B.1.52-1961 Metrinen ISO-karkeakierre
SFS 2219-1967
SFS 2458-1969

KE-KEBS, thread standard tolerance iso

KS 06-323-1982 KENYA STANDARD SPECIFICATION FOR ISO METRIC THREADS

Lithuanian Standards Office , thread standard tolerance iso

LST EN 22857-2001 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches - Manufacturing tolerances on the threaded portion (ISO 2857:1973 + A1:1984 +A2:1986)
LST EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
LST EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013)
LST EN 2859-2006 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series - Classification: 1 100 MPa (at ambient temperature) / 235 °C
LST EN 2549-2006 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C
LST EN 4127-2009 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C

RU-GOST R, thread standard tolerance iso

GOST ISO 965-5-2015 Basic norms of interchangeability. ISO general purpose metric screw threads. Tolerances. Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
GOST 7157-1979 Gauges for pine taper thread. Types. Basic dimensions and tolerances

KP-CSK, thread standard tolerance iso

KPS 2551-4-2002 ISO general purpose metric screw threads-Tolerances-Part 4:Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing

Korean Agency for Technology and Standards (KATS), thread standard tolerance iso

KS B ISO 2857-2005(2010) Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches－Manufacturing tolerances on the threaded portion
KS B ISO 2857:2005 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches-Manufacturing tolerances on the threaded portion
KS B ISO 2857:2013 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches－Manufacturing tolerances on the threaded portion
KS B ISO 228-1:2007 Pipe threads where pressure－tight joints are not made on the threads－Part 1：Dimensions, tolerances and designation
KS B 0213-1974 Limits and Tolerances for Unified Coarse Screw Threads
KS B 0216-1974 Limits and Tolerances for Unified Fine Screw Threads
KS B ISO 4145:2007 Non-alloy steel fittings threaded to ISO 7-1
KS B ISO 4145:2013 Non-alloy steel fittings threaded to ISO 7－1

Taiwan Provincial Standard of the People's Republic of China, thread standard tolerance iso

CNS 10792-1984 Metric Tapered External Screw Threads with Mating Parallel Internal Screw Threads (Nominal Dimensions and Permissible Deviations)
CNS 4545-1996 Limits of Sizes and Tolerances for ISO Metric Coarse Screw Threads (Tolerance Quality:Coarse,Tolerances:7H and 8g)(Diameters form 3 to 68mm and Pitches 0.5 to 6mm)
CNS 4548-1996 Limits of Sizes and Tolerances for ISO Metric Fine Screw Threads (Tolerance Quality:Coarse,Tolerances:7H and 8g)(Diameters form 4 to 300mm and Pitches 0.5 to 6mm)
CNS 532-1996 Limits of Size and Tolerances for ISO Metric Coarse Screw Threads (Tolerance Quality:Fine,Tolerances:4H`6i5H and 4h)(Diameters from 1 to 68 mm and Pitches 0.25 to 6 mm)
CNS 4547-1996 Limits of Sizes and Tolerances for ISO Metric Fine Screw Threads (Tolerance Quality:Medium,Tolerances:6H and 6h`6i6g)(Diameters form 2.5 to 300mm and Pitches 0.35 to 6mm)
CNS 4546-1996 Limits of Sizes and Tolerances for ISO Metric Fine Screw Threads (Tolerance Quality:Fine,Tolerances:4H`6i5H and 4h)(Diameters form 1 to 300mm and Pitches 0.2 to 6mm)
CNS 4544-1996 Limits of Sizes and Tolerances for ISO Metric Coarse Screw Threads (Tolerance Quality:Medium,Tolerances: 5H`6i6H and 6h `6i6g)(Diameters form 1 to 68mm and Pitches 0.25 to 6mm)

ES-AENOR, thread standard tolerance iso

UNE 16-605-1991

TZ-TBS, thread standard tolerance iso

TZS 171-1983 Tanzania Standard ISO General purpose metric screw threads — Tolerances: Limits of sizes for commercial bolt and nut threads — Medium quality

Society of Automotive Engineers (SAE), thread standard tolerance iso

SAE MA2012B-2015 PORT, INTERNAL, STRAIGHT THREAD, FITTING CONNECTION, DESIGN STANDARD, METRIC
SAE MA1567B-2018 Insert, Screw Thread, Helical Coil Metric Series, Standard Assembly Dimensions For
SAE MA2273-2015 FITTING END, BEAM SEAL, EXTERNAL THREAD, DESIGN STANDARD, METRIC
SAE MA1567B-1996 Insert, Screw Thread, Helical Coil Metric Series, Standard Assembly Dimensions For
SAE MA2273-1995 FITTING END, BEAM SEAL, EXTERNAL THREAD, DESIGN STANDARD, METRIC

Standard Association of Australia （SAA）, thread standard tolerance iso

AS ISO 7.1:2008 Pipe threads where pressure-tight joints are made on the threads - Dimensions, tolerances and designation
AS 1654.2:1995 ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts

SAE - SAE International, thread standard tolerance iso

SAE MA1567C-2019 Insert@ Screw Thread@ Helical Coil Metric Series@ Standard Assembly Dimensions for

Aerospace Industries Association/ANSI Aerospace Standards, thread standard tolerance iso

AIA/NAS NAS333-340-2012 SCREW, SHEAR, 100?STANDARD FLUSH HEAD, CLOSE TOLERANCE, 95 KSI Fsu Rev 15
AIA/NAS NAS333-340-2013 SCREW, SHEAR, 100?STANDARD FLUSH HEAD, CLOSE TOLERANCE, 95 KSI Fsu Rev.16

European Association of Aerospace Industries, thread standard tolerance iso

AECMA PREN 2859-1999 Aerospace Series Bolts, Normal Hexagonal Head, Close Tolerance Normal Shank, Short Thread, in Alloy Steel, Cadmium Plated Classification: 1 100 MPa (at Ambient Temperature) / 235 Degrees C Edition 1
AECMA PREN 2859-1994 Aerospace Series Bolts, Normal Hexagonal Head, Close Tolerance Normal Shank, Short Thread, in Alloy Steel, Cadmium Plated Classification: 1 100 MPa (at Ambient Temperature)/235 Degrees C Edition P 2
AECMA PREN 2859-1989 Bolts, Hexagonal Normal Head, Close Tolerance Shank, Short Thread in Steel Cadmium Plated Classification 1100 MPa/235 Degrees Celsius
AECMA PREN 2158-2-1979 MJ Threads Part 2 - Selection of Nominal Diameters - Pitches - Tolerances Aerospace Series Edition 1
AECMA PREN 4495-1999 Aerospace Series Bolts, Normal Hexagonal Head, Close Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, with Aluminium Pigmented Coating Classification: 1 100 MPa ( at Ambient Temperature)/ 315 C Degrees Edition P 1

Aerospace Industries Association, thread standard tolerance iso

AIA NAS 335-2000 Screw, Shear, 100 Degree Standard Flush Head, Close Tolerance, 95 KSI Fsu ,Close Tolerance, 95 KSI Fsu FSC 5305; REV 14

Aerospace, Security and Defence Industries Association of Europe (ASD), thread standard tolerance iso

ASD-STAN PREN 2158-2-1979 MJ Threads Part 2 - Selection of Nominal Diameters - Pitches - Tolerances Aerospace Series (Edition 1)