ZH

RU

ES

Conductivity test cup

Conductivity test cup, Total:497 items.

In the international standard classification, Conductivity test cup involves: Hydraulic energy engineering, Surface treatment and coating, Testing of metals, Non-destructive testing, Materials for aerospace construction, Farming and forestry, Continuous handling equipment, Protection against fire, Conducting materials, Adhesives, Raw materials for rubber and plastics, Electricity. Magnetism. Electrical and magnetic measurements, Analytical chemistry, Water quality, Refractories, Sugar. Sugar products. Starch, Fuels, Printed circuits and boards, Semiconducting materials, Organic chemicals, Soil quality. Pedology, Insulating materials, Non-ferrous metals, Plastics, Electrical and electronic testing, Test conditions and procedures in general, Electrical accessories, Geology. Meteorology. Hydrology, Power stations in general, Internal combustion engines, Integrated circuits. Microelectronics, Petroleum products in general, Piezoelectric and dielectric devices, Components and accessories for telecommunications equipment, Semiconductor devices, Paper and board, Mechanical testing, Rubber, Safety of machinery, Paints and varnishes, Fasteners, Ferroalloys, Paint ingredients, Photography, Meat, meat products and other animal produce, Thermodynamics and temperature measurements, Ceramics, Construction materials, Products of the chemical industry, Electrical wires and cables, Insulating fluids, Pipeline components and pipelines, Non-metalliferous minerals, Reinforced plastics, Aerospace electric equipment and systems, Magnetic materials, Measurement of fluid flow, Protection of and in buildings, Metrology and measurement in general, Pulps, Fertilizers, Linear and angular measurements, Flexible drives and transmissions, Electrical engineering in general.


Professional Standard - Aerospace, Conductivity test cup

  • QJ 1523-1988 Conductive Adhesive Resistivity Test Method
  • QJ 20027-2011 Test method for thermal conductivity of thermal conductive grease at low temperature
  • QJ 1402-1988 Test method for low temperature thermal conductivity of metals
  • QJ 2220.2-1992 Test methods for electrical insulation properties of coatings Test methods for insulation resistance, surface resistivity, and volume resistivity

KR-KS, Conductivity test cup

  • KS I 3201-2023 Testing methods for electric conductivity in highly purified water
  • KS I ISO 11265-2021 Soil quality — Determination of the specific electrical conductivity
  • KS M ISO 6297-2003(2023)
  • KS C IEC 61788-16-2020 Superconductivity — Part 16: Electronic characteristic measurements — Power-dependent surface resistance of superconductors at microwave frequencies
  • KS C IEC 60754-2-2019 Test on gases evolved during combustion of materials from cables — Part 2: Determination of acidity(by pH measurement) and conductivity
  • KS C IEC 61788-14-2020 Superconductivity — Part 14: Superconducting power devices —General requirements for characteristic tests of current leads designed for powering superconducting devices
  • KS C IEC 61338-1-5-2019 Waveguide type dielectric resonators — Part 1-5: General information and test conditions — Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave
  • KS M ISO 1853-2018 Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity

CL-INN, Conductivity test cup

Professional Standard - Water Conservancy, Conductivity test cup

  • SL 78-1994 Determination of conductivity (Conductivity instrument method)

American Society for Testing and Materials (ASTM), Conductivity test cup

  • ASTM D4399-05 Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
  • ASTM D4399-05(2023) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
  • ASTM D4496-21 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
  • ASTM D2739-97 Standard Test Method for Volume Resistivity of Conductive Adhesives
  • ASTM B193-02 Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM B193-00 Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM B193-01 Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM B193-87(1992) Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM B193-19 Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM B193-87 Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM B193-20 Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM B342-63(1980)e1 Test Method for Electrical Conductivity by Use of Eddy Currents
  • ASTM F1896-10 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
  • ASTM D5128-90(1999)e1 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
  • ASTM D1125-23 Standard Test Methods for Electrical Conductivity and Resistivity of Water
  • ASTM E1004-09 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method
  • ASTM F1896-98 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
  • ASTM F1896-98(2004) Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
  • ASTM E1004-17 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method
  • ASTM F1896-16 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
  • ASTM D2624-09 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
  • ASTM D2624-00 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
  • ASTM D257-14(2021)e1 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
  • ASTM D5568-14 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Waveguide
  • ASTM D4308-95(2005) Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
  • ASTM D4308-95(2000)e1 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
  • ASTM D5464-93(2001) Standard Test Methods for pH Measurement of Water of Low Conductivity
  • ASTM D5128-14(2022) Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
  • ASTM D4308-95(2010) Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
  • ASTM D4308-10 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
  • ASTM D5464-16 Standard Test Method for pH Measurement of Water of Low Conductivity
  • ASTM D5128-14 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
  • ASTM D5856-15 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
  • ASTM B63-07(2018) Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
  • ASTM B193-02(2008) Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM B193-02(2014) Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM B193-16 Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM D5856-95(2007) Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
  • ASTM D5856-95(2002) Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
  • ASTM D5856-95(2002)e1 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
  • ASTM D5856-95 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
  • ASTM D5391-99 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
  • ASTM D5391-99(2005) Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
  • ASTM D6391-11(2020) Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
  • ASTM C408-88(1999) Standard Test Method for Thermal Conductivity of Whiteware Ceramics
  • ASTM C408-88(2020) Standard Test Method for Thermal Conductivity of Whiteware Ceramics
  • ASTM C1876-19 Standard Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete
  • ASTM F76-86(1996)e1 Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
  • ASTM F76-86(2002) Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
  • ASTM F76-08 Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
  • ASTM E1004-99 Standard Practice for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method
  • ASTM D1125-95(2005) Standard Test Methods for Electrical Conductivity and Resistivity of Water
  • ASTM D1125-14 Standard Test Methods for Electrical Conductivity and Resistivity of Water
  • ASTM D1125-95(2009) Standard Test Methods for Electrical Conductivity and Resistivity of Water
  • ASTM D4308-12 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
  • ASTM D4308-13 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
  • ASTM F76-08(2016)e1 Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
  • ASTM D5391-23 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
  • ASTM D2739-97(2017) Standard Test Method for Volume Resistivity of Conductive Adhesives
  • ASTM F76-08(2016) Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
  • ASTM D5568-01 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies
  • ASTM D5568-95 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies
  • ASTM D5568-22a Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Waveguide
  • ASTM D5568-08 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies
  • ASTM D5568-22 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Waveguide
  • ASTM D2739-97(2004) Standard Test Method for Volume Resistivity of Conductive Adhesives
  • ASTM D2739-97(2010) Standard Test Method for Volume Resistivity of Conductive Adhesives
  • ASTM A772/A772M-00 Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current
  • ASTM A772/A772M-00(2022) Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
  • ASTM A772/A772M-00(2016) Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
  • ASTM D7677-11 Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water
  • ASTM D7677-16 Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water
  • ASTM E1698-95(2010) Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography
  • ASTM D257-07 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
  • ASTM E1004-02 Standard Practice for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method
  • ASTM D5464-07 Standard Test Method for pH Measurement of Water of Low Conductivity
  • ASTM D5464-11 Standard Test Method for pH Measurement of Water of Low Conductivity
  • ASTM B63-90(2001) Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
  • ASTM B63-90(1995)e1 Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
  • ASTM D2624-01 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
  • ASTM C1760-12 Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete
  • ASTM D2624-22 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
  • ASTM D2624-15 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
  • ASTM D257-99 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
  • ASTM D7664-10(2018)e1 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils

SE-SIS, Conductivity test cup

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Conductivity test cup

  • GB/T 12966-1991 The method for electrical conductivity measurement of aluminium alloys by use of eddy current
  • GB/T 12966-2008 The method for determining aluminum alloys conductivity using eddy current
  • GB/T 15662-1995 Method of testing volume resistivity of conducting and antistatic plastics
  • GB/T 11007-1989 Test method of electric conductivity analyzers
  • GB/T 11007-2008 Test method of electrolytic conductivity analyzers
  • GB/T 32791-2016 Electromagnetic (eddy-current) examination method for electrical conductivity of copper and copper alloys
  • GB/T 18932.15-2003 Method for the determination of electrical conductivity in honey
  • GB/T 14114-1993 General principles of measuring methods of V/F and F/V converters for semiconductor integrated circuits
  • GB/T 6616-2023 Non-contact eddy current method for testing semiconductor wafer resistivity and semiconductor film sheet resistance
  • GB/T 16906-1997 Standard test methods for electrical resistivity of antistatic coating in petroleum tanks
  • GB/T 13580.3-1992 Determination of specific conductance in the wet precipitation
  • GB/T 23977-2009 Dyestuffs.Determination of content of salt.Conductance method
  • GB 13580.3-1992 Method for Determination of Conductivity of Atmospheric Precipitation Water
  • GB/T 42848-2023 Test method for direct digital frequency synthesizer of semiconductor integrated circuit
  • GB/T 3048.2-1994 Test methods for determining electrical properties of electric cables and wires.Measurement of resistivity of metallic conductive materials
  • GB/T 12582-1990 Liquid hydrocarbons--Determination of electrical conductivity--Precision meter
  • GB/T 27502-2011 Preparation method of reference solutions for the measurement of conductivity
  • GB/T 15738-1995 Test method of resistivity for fibre reinforced conducting and antistatic plastics
  • GB/T 15738-2008 Test method for resistivity of conducting and antistatic fiber reinforced plastics
  • GB/T 3048.3-1994 Test methods for determining electrical properties of electric cables and wires.Measurement of volumeresistivity of semi-conducting rubbers and plastics
  • GB/T 32697-2016 Plastics.Phenol-formaldehyde.Determination of electrical conductivity of resin extracts
  • GB/T 6539-1997 Standard test methods for electrical conductivity of aviation and distillate fuels
  • GB/T 6616-2009 Test methods for measuring resistivity of semiconductor wafers or sheet resistance of semiconductor films with a noncontact eddy-current gauge
  • GB/T 7976-1987 Insulating paper and board--Determination of the electrical conductivity for the water extract
  • GB/T 2915-2013 Determination of conductivity of water extract of polyvinyl chloride resins
  • GB/T 41880-2022 Plastics—Epoxy resins—Determination of electrical conductivity of aqueous resin extracts
  • GB/T 7977-1987 Paper board and pulps--Determination of the electrical conductivity for the water extract
  • GB/T 7977-2007 Paper,board and pulps.Determination of conductivity of aqueous extracts
  • GB/T 2915-1999 Determination of conductivity of water extract of poly(vinyl chloride) Resins
  • GB/T 11446.4-1997 Test methods for resistivity of electronic grade water
  • GB/T 11446.4-2013 Test method for resistivity of electronic grade water

National Metrological Verification Regulations of the People's Republic of China, Conductivity test cup

Professional Standard - Aviation, Conductivity test cup

  • HB 5356-1986 Eddy current test method for electrical conductivity of aluminum alloy

ET-QSAE, Conductivity test cup

Danish Standards Foundation, Conductivity test cup

  • DS/EN ISO 284:2013 Conveyor belts - Electrical conductivity - Specification and test method
  • DS/EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics
  • DS/EN 27888:2003 Water quality - Determination of electrical conductivity (ISO 7888:1985)
  • DS/EN ISO 15091:2013 Paints and varnishes - Determination of electrical conductivity and resistance
  • DS/ISO 1853:1980 Conducting and antistatic rubber. Measurement of resistivity
  • DS/EN 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies
  • DS/EN 61788-14:2010 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
  • DS/EN 13038:2012 Soil improvers and growing media - Determination of electrical conductivity
  • DS/EN 61788-7:2007 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies

AENOR, Conductivity test cup

  • UNE 22315:1985 VENTILATION DUCTS. ELECTRIC CONDUCTIVITY. TESTING METHOD. SPECIFICATIONS.
  • UNE 18155:1981 ANTISTATIC ENDLESS V-BELTS - ELECTRICAL CONDUCTIVITY - CHARACTERISTICS AND METHOD OF TEST.
  • UNE 22070:1992 COMPRESSED AIR HOSES. ELECTRIC CONDUCTIVITY. TESTING METHOD AND SPECIFICATIONS.
  • UNE 77308:2001 Soil quality. Determination of the specific electrical conductivity.
  • UNE-EN 27888:1994 WATER QUALITY. DETERMINATION OF ELECTRICAL CONDUCTIVITY. (ISO 7888:1985).
  • UNE-EN ISO 3915:2000 PLASTICS - MEASUREMENT OF RESISTIVITY OF CONDUCTIVE PLASTICS (ISO 3915:1981)
  • UNE 22071:1992 HOSES FOR PNEUMATIC BLASTING LOADING. ELECTRIC CONDUCTIVITY. TESTING METHOD AND SPECIFICATIONS.
  • UNE 34185:1984 SUGARS. DETERMINATION OF CONDUCTIVITY ASH. METHOD BY POINTS ATTRIBUTION.
  • UNE-EN ISO 15091:2013 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2012)
  • UNE-ISO 1853:2012 Conducting and dissipative rubbers, vulcanised or thermoplastic. Measurement of resistivity
  • UNE-ISO 6587:2008 Paper, board and pulps. Determination of conductivity of aqueous extracts.
  • UNE-EN 13038:2012 Soil improvers and growing media - Determination of electrical conductivity

Korean Agency for Technology and Standards (KATS), Conductivity test cup

  • KS M 6773-2014 Testing method for volume resistivity of electrically conductive rubber and plastic materials
  • KS L 3306-2007(2012) Testing method for thermal conductivity of firebricks by hot wire
  • KS L 3306-1980 Testing method for thermal conductivity of firebricks by hot wire
  • KS I ISO 7888:2007 Water quality-Determination of electrical conductivity
  • KS I ISO 7888-2007(2017) Water quality-Determination of electrical conductivity
  • KS I 8001-2009 General rules for electrical conductivity measuring method
  • KS M 0042-1999
  • KS C 2603-1980(2020) Testing Method for Conductor-Resistance and Resistivity of Metallic Resistance materials
  • KS L 1619-2013(2018) Testing methods for resistivity of conductive fine ceramic thin films with four point probe array
  • KS M 6773-2014(2019) Testing method for volume resistivity of electrically conductive rubber and plastic materials
  • KS I ISO 11265:2005 Soil quality-Determination of the specific electrical conductivity
  • KS D 0240-2010 Measuring methods for electrical resistivity and conductivity of non-ferrous metals
  • KS M ISO 3915:2002 Plastics-Measurement of resistivity of conductive plastics
  • KS M 3034-1980(2011) Test methods for electrical resistivity of conductive plastics
  • KS M ISO 3915-2002(2017) Plastics-Measurement of resistivity of conductive plastics
  • KS M ISO 3915-2002(2022) Plastics-Measurement of resistivity of conductive plastics
  • KS M 3034-1985 Test methods for electrical resistivity of conductive plastics
  • KS C 2116-1996 Testing method for permeability of feebly magnetic materials
  • KS I ISO 11265:2021 Soil quality — Determination of the specific electrical conductivity
  • KS I ISO 11265-2005(2015) Soil quality-Determination of the specific electrical conductivity
  • KS C 2607-1974(2000) TESTING METHODS OF SEMICONDUCTOR
  • KS C 2607-1980 TESTING METHODS OF SEMICONDUCTOR
  • KS L 1620-2013(2018) Test methods for measuring resistivity of electrically conductive ceramic thin films with Van der Pauw method
  • KS I 8001-2009(2019) General rules for electrical conductivity measuring method
  • KS I 3201-2007 Testing methods for electric conductivity in highly purified water
  • KS C IEC 61788-11:2005 Superconductivity-Part 11:Residual resistance ratio measurement-Residual resistance ratio of Nb3Sn composite superconductors
  • KS C 2603-1980 Testing Method for Conductor-Resistance and Resistivity of Metallic Resistance materials
  • KS C IEC 61788-16:2020 Superconductivity — Part 16: Electronic characteristic measurements — Power-dependent surface resistance of superconductors at microwave frequencies
  • KS C IEC 60754-2:2019 Test on gases evolved during combustion of materials from cables — Part 2: Determination of acidity(by pH measurement) and conductivity
  • KS F 2463-2009 Method of thermal conductivity test for materials
  • KS F 2463-1986 Method of thermal conductivity test for materials
  • KS C 0263-2002(2022) Testing methods of resistivity germanium
  • KS C IEC 61788-14:2020 Superconductivity — Part 14: Superconducting power devices —General requirements for characteristic tests of current leads designed for powering superconducting devices
  • KS C IEC 61338-1-5:2019 Waveguide type dielectric resonators — Part 1-5: General information and test conditions — Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave
  • KS C 6111-2-2005 Superconductivity-Critical temperature measurement-Critical temperature of Nb-Ti, Nb3Sn, and Bi-system composite superconductors by a magnetic method using an ac susceptometer
  • KS L 1619-2013 Testing methods for resistivity of conductive fine ceramic thin films with four point probe array
  • KS L 1619-2003 Test methods for measuring resistivity of electrically conductive ceramic thin films with four point probe method
  • KS M ISO 1853:2018 Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity

AT-ON, Conductivity test cup

  • ONORM M 6241-1988 Water quality; determination of electrica! conductivity
  • ONORM EN 20284-1993 Conveyor belts — Electrical conductivity — Specification and method of test (ISO 284:1982)
  • ONORM EN 27888-1993 Water quality. Determination of electrical conductivity (ISO 7888:1985)
  • OENORM EN ISO 3915:2021 Plastics - Measurement of resistivity of conductive plastics (ISO/DIS 3915:2021)
  • ONORM B 6015-2-2000 Determination of thermal conductivity by the guarded hot plate apparatus - Determination of the specific thermal conductivity in building materials

Professional Standard - Chemical Industry, Conductivity test cup

  • HG/T 3335-1977 Electrophoretic Paint Conductivity Determination Method
  • HG 2-1047-1977 Electrophoretic Paint Conductivity Determination Method
  • HG/T 3506-1999 Surface active agents.Determination of electrical conductivity of water or aqueous solutions for tests
  • HG/T 2905-1997 Plastics-phenolic resins-determination of electrical conductivity

Professional Standard - Energy, Conductivity test cup

Indonesia Standards, Conductivity test cup

  • SNI 06-6989.1-2004 Water and waste water - Part 1: Test methods of electrical conductivity

GOSTR, Conductivity test cup

  • GOST 33461-2015 Aviation and distillate fuels. Test methods for electrical conductivity

国家市场监督管理总局、中国国家标准化管理委员会, Conductivity test cup

  • GB/T 12966-2022 The methods for determining aluminium and aluminium alloys conductivity using eddy current

International Organization for Standardization (ISO), Conductivity test cup

  • ISO 7888:1985 Water quality; Determination of electrical conductivity
  • ISO 11265:1994 Soil quality - Determination of the specific electrical conductivity
  • ISO 3915:1981 Plastics; measurement of resistivity of conductive plastics
  • ISO 3915:2022 Plastics — Measurement of resistivity of conductive plastics
  • ISO/TR 6307:2023 Effect of conductivity on multipass testing as per ISO 4548-12:2017
  • ISO/DTR 6307 Effect of conductivity on multipass testing as per ISO 4548-12:2017
  • ISO 2878:2005 Rubber - Antistatic and conductive products - Determination of electrical resistance
  • ISO 15091:2019 Paints and varnishes — Determination of electrical conductivity and resistance
  • ISO 284:1975 Title missing - Legacy paper document
  • ISO 284:2003 Conveyor belts - Electrical conductivity - Specification and test method
  • ISO 284:2012 Conveyor belts - Electrical conductivity - Specification and test method
  • ISO 284:1982 Conveyor belts; Electrical conductivity; Specification and method of test
  • ISO 1853:1975 Conducting and antistatic rubbers; Measurement of resistivity
  • ISO/CD 11265:2023 Environmental solid matrices — Determination of the specific electrical conductivity
  • ISO 2878:1987 Rubber, vulcanized; Antistatic and conductive products; Determination of electrical resistance
  • ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
  • ISO 11265:1994/cor 1:1996 Soil quality - Determination of the specific electrical conductivity; Technical Corrigendum 1
  • ISO 6587:1980 Paper, board and pulps — Determination of conductivity of aqueous extracts
  • ISO 9563:1990 Belt drives; electrical conductivity of antistatic endless synchronous belts; characteristics and test method
  • ISO 9563:2015 Belt drives - Electrical conductivity of antistatic endless synchronous belts - Characteristics and test method

Association Francaise de Normalisation, Conductivity test cup

  • NF T90-031*NF EN 27888:1994 Water quality - Determination of electrical conductivity.
  • NF EN 27888:1994 Qualité de l'eau - Détermination de la conductivité électrique
  • NF T51-080*NF EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics
  • NF ISO 11265:1995 Qualité du sol - Détermination de la conductivité électrique spécifique
  • NF Q03-067:1981 Paper, board and pulp tests. Determination of conductivity of aqueous extracts.
  • NF T90-111:1975 Water testing - Estimate of dissolved salt content from the determination of theoretical electrical conductivity
  • NF T30-005*NF EN ISO 15091:2020 Paints and varnishes - Determination of electrical conductivity and resistance
  • NF EN ISO 15091:2020 Peintures et vernis - Détermination de la conductivité et de la résistance électriques
  • NF X31-113*NF ISO 11265:1995 Soil quality. Determination of the specific electrical conductivity.
  • NF EN 4703:2022 Série aérospatiale - Spécification d'essai pour la vérification de la perméabilité de l'isolation électrique
  • NF C31-888-4:2012 Superconductivity - Part 4 : residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors.
  • NF T47-135:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity.
  • NF C31-888-16*NF EN 61788-16:2013 Superconductivity - Part 16 : electric characteristic measurements - Power dependent surface resistance of superconductors at microwave frequencies
  • NF EN 61338-1-5:2015 Résonateurs diélectriques à modes guidés - Partie 1-5 : informations générales et conditions d'essais - Méthode de mesure de la conductivité au niveau de l'interface entre une couche conductrice et un substrat diélectrique fonctionnant aux h...
  • NF T47-109*NF EN ISO 284:2013 Conveyor belts - Electrical conductivity - Specification and test method
  • NF C31-888-11:2003 Superconductivity - Part 11 : residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors.
  • NF C31-888-11:2011 Superconductivity - Part 11 : residual resistance ratio measurment - Residual resistance ratio of Nb3Sn composite superconductors.
  • NF EN 61788-14:2014 Supraconductivité - Partie 14 : dispositifs supraconducteurs de puissance - Exigences générales pour les essais de caractéristiques d'amenées de courant conçus pour alimenter des dispositifs supraconducteurs
  • NF C96-627-1-5*NF EN 61338-1-5:2015 Waveguide type dielectric resonators - Part 1-5 : general information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency
  • NF ISO 1853:2019 Caoutchoucs vulcanisés ou thermoplastiques conducteurs et dissipatifs - Mesurage de la résistivité
  • NF EN IEC 63373:2022 Lignes directrices pour les méthodes d'essai de résistance dynamique à l'état passant des dispositifs de conversion de puissance fondés sur les HEMT en GaN
  • NF X10-025:1991 Isolation thermique - Détermination de la résistance thermique et de la conductivité thermique en régime stationnaire - Méthode fluxmétrique
  • NF T51-442*NF EN ISO 9944:1995 Plastics. Phenolic resins. Determination of electrical conductivity of resin extracts.
  • NF EN 13038:2012 Amendements du sol et supports de culture - Détermination de la conductivité électrique
  • NF C96-373*NF EN IEC 63373:2022 Dynamic on-resistance test method guidelines for GaN HEMT based power conversion devices
  • NF EN ISO 8031:2020 Tuyaux et flexibles en caoutchouc et en plastique - Détermination de la résistance et de la conductivité électriques
  • NF C31-888-7*NF EN IEC 61788-7:2020 Superconductivity - Part 7 : electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
  • NF C31-888-7*NF EN 61788-7:2006 Superconductivity - Part 7 : electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies

RU-GOST R, Conductivity test cup

  • GOST R 53120-2008 Honey. Method for determination of electroconductivity
  • GOST 31770-2012 Honey. Method for determination of electroconductivity
  • GOST 25183.7-1982 Photographic gelatine. Method of determination of specific electroconductivity
  • GOST ISO 284-2017 Conveyor belts. Requirement to electrical conductivity and method for determination
  • GOST R IEC 60754-2-1999 Tests of materials from cables during combustion. Determination of degree of evolved gases by measuring pH and conductivity
  • GOST 8.457-2000 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring specific conductivity of liguids
  • GOST 8.457-1982 State system for ensuring the uniformity of measurements. State primary standards and state verification schedule for means of measuring specific conductivity of solutions of electrolytes within the range of 1kh10 in minus 4 degree to 1kh10 in 2 degree S
  • GOST 12119.6-1998 Electrical steel. Methods of test for magnetic and electrical properties. Method for measurement of relative magnetic permeability and specific magnetic losses by a.c. bridge

Japanese Industrial Standards Committee (JISC), Conductivity test cup

  • JIS K 0400-13-10:1999 Water quality -- Determination of electrical conductivity
  • JIS H 7312:2007 Superconductivity -- Residual resistance ratio measurement -- Residual resistance ratio of Nb3Sn composite superconductors
  • JIS H 0505:1975 Measuring methods for electrical resistivity and conductivity of non-ferrous materials
  • JIS K 0130:2008 General rules for electrical conductivity measuring method
  • JIS K 0552:1994 Testing methods for electric conductivity in highly purified water
  • JIS K 7194:1994 Testing method for resistivity of conductive plastics with a four-point probe array
  • JIS H 0601:1962 Testing methods of resistivity for germanium
  • JIS H 7307:2005 Superconductivity -- Part 7: Electoronic characteristic measurements -- Surface resistance of superconductors at microwave frequencies
  • JIS H 7307:2010 Superconductivity -- Part 7: Electronic characteristic measurements -- Surface resistance of superconductors at microwave frequencies
  • JIS C 2525:1994 Testing method for conductor-resistance and resistivity of metallic resistance materials

German Institute for Standardization, Conductivity test cup

  • DIN EN 27888:1993 Water quality; determination of electrical conductivity (ISO 7888:1985); German version EN 27888:1993
  • DIN 10753:2021-06 Analysis of honey - Determination of electrical conductivity
  • DIN 53779:1979 Determination of the electric conductivity and the specific resistance (resistivity) of aqueous extracts
  • DIN EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981); German version EN ISO 3915:1999
  • DIN EN ISO 3915:2022-05 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022); German version EN ISO 3915:2022
  • DIN 51412-2:2013 Testing of petroleum products.Determination of the electrical conductivity.Part 2: Field method
  • DIN 51412-2:2006 Testing of petroleum products - Determination of the electrical conductivity - Part 2: Field method
  • DIN 10753:2021 Analysis of honey - Determination of electrical conductivity
  • DIN EN 27888:1993-11 Water quality; determination of electrical conductivity (ISO 7888:1985); German version EN 27888:1993
  • DIN EN 61338-1-5:2016-04 Waveguide type dielectric resonators - Part 1-5: General information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency (IEC 61338-1-5:2015); German version EN 6...
  • DIN 51412-2:2013-01 Testing of petroleum products - Determination of the electrical conductivity - Part 2: Field method
  • DIN EN ISO 15091:2020-05 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2019); German version EN ISO 15091:2020
  • DIN EN 61788-11:2012 Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb<(Index)3>Sn composite superconductors (IEC 61788-11:2011); German version EN 61788-11:2011
  • DIN 51412-1:2005-06 Testing of petroleum products - Determination of the electrical conductivity - Part 1: Laboratory method
  • DIN EN 61788-4:2012 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors (IEC 61788-4:2011); German version EN 61788-4:2011
  • DIN EN 61788-4:2008 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors (IEC 61788-4:2007); German version EN 61788-4:2007
  • DIN EN 61620:1999 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method (IEC 61620:1998); German version EN 61620:1999
  • DIN EN ISO 3915:2021 Plastics - Measurement of resistivity of conductive plastics (ISO/DIS 3915:2021); German and English version prEN ISO 3915:2021
  • DIN 50994:2017 Measurement of coatings - Non-destructive measurement of the conductivity of metallic coatings
  • DIN 50994:2017-11 Measurement of coatings - Non-destructive measurement of the conductivity of metallic coatings
  • DIN 50448:1998 Testing of materials for semiconductor technology - Contactless determination of the electrical resistivity of semi-insulating semi-conductor slices using a capacitive probe
  • DIN EN ISO 15091:2020 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2019)
  • DIN 51627-4:2009 Automotive fuels - Test methods - Part 4: Determination of electrical conductivity in ethanol fuel
  • DIN EN ISO 6817:1995 Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992); German version EN ISO 6817:1995
  • DIN EN 13038:2012-01 Soil improvers and growing media - Determination of electrical conductivity; German version EN 13038:2011

UY-UNIT, Conductivity test cup

工业和信息化部/国家能源局, Conductivity test cup

  • JB/T 13537-2018 Test method for volume resistivity of conductive powder for electromagnetic shielding
  • JB/T 13536-2018 Test method for magnetic permeability of electromagnetic shielding and absorbing materials

Taiwan Provincial Standard of the People's Republic of China, Conductivity test cup

  • CNS 15111-2007 Methods of test for electrical conductivity and resistivity of water
  • CNS 14639-2002 Methods of test for electric conductivity in highly purified water
  • CNS 13727-1996 Method of Test for Volume Resistivity of Conductive Adhesives

Professional Standard - Electron, Conductivity test cup

  • SJ 2857.2-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurements of conductivity
  • SJ 2857.1-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurement of thermal conductivity
  • SJ 20512-1995 Test methods for permittivity and permeability of microwave high loss solid materials
  • SJ/T 10295-1991 Testing methods of frequency character for marine radar transmitters

VN-TCVN, Conductivity test cup

  • TCVN 6650-2000 Soil quality.Determination of the specific electrical conductivity

RO-ASRO, Conductivity test cup

  • STAS 8917-1971 CONVEYOR BELTS Determination of electrical conductivity
  • STAS 8890-1980 Electrical insulating paper and board DETERMINATION OF CONDUCTIVITY OF AQUEOUS EXTRACT
  • STAS 8863-1972 DRESSED AICFIFICIAL AND SYNTHETIC LEATHERS Determination of conducitivity

IPC - Association Connecting Electronics Industries, Conductivity test cup

Professional Standard - Environmental Protection, Conductivity test cup

  • HJ 802-2016 Soil quality—Determination of conductivity- Electrode method

Military Standard of the People's Republic of China-General Armament Department, Conductivity test cup

  • GJB 8681-2015 Calibration procedures for conductivity and volume resistance testers of solid explosives
  • GJB 10010-2021 Method for measuring conductivity of insulating materials used in aerospace
  • GJB 10252-2021 Test method for high-temperature steady-state thermal conductivity of thermal insulation materials
  • GJB 329-1987 Test method for medium-temperature steady-state thermal conductivity of thermal insulation materials
  • GJB 328-1987 Test method for low-temperature steady-state thermal conductivity of thermal insulation materials

Lithuanian Standards Office , Conductivity test cup

  • LST EN ISO 284:2013 Conveyor belts - Electrical conductivity - Specification and test method (ISO 284:2012)
  • LST EN 27888-1999 Water quality - Determination of electrical conductivity (ISO 7888:1985)
  • LST EN ISO 3915:2001 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981)
  • LST EN 61788-11-2011 Superconductivity -- Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors (IEC 61788-11:2011)
  • LST EN 61788-4-2011 Superconductivity -- Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors (IEC 61788-4:2011)
  • LST EN ISO 15091:2013 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2012)
  • LST EN 13038-2012 Soil improvers and growing media - Determination of electrical conductivity
  • LST EN 61788-14-2010 Superconductivity -- Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices (IEC 61788-14:2010)

American National Standards Institute (ANSI), Conductivity test cup

  • ANSI/ASTM D4308:2013 Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
  • ANSI/ASTM D257:2014 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
  • ANSI/EIA 364-54A:1999 Magnetic Permeability Test Procedure for Electrical Connectors, Contacts and Sockets
  • ANSI/ASTM D4308:2021 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
  • ANSI/ASTM D4496:2013 New Standard Test Method for DC Resistance or Conductance of Moderately Conductive Materials
  • ANSI/ASTM D5568:2008 Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies
  • ANSI/ASTM D2624:2021 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
  • ANSI/ASTM D2624:2009 Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

CZ-CSN, Conductivity test cup

  • CSN 35 1540-1979 Tests of power semiconductor converters
  • CSN 42 0475-1982 Metal testing. Determination of electric conductivity of metallurgical products
  • CSN 72 5032-1973 Testing of fired ceram,ic materials Determination of the specific thermal conductivity
  • CSN 50 0332-1972 Paper sizing measurement by lectroconduotivity method
  • CSN 34 6319-1987 Testing of ceramic electrotechnic materials. Methods of the determination of medium specific heat, thermal conductivity and medium temperature conductivity
  • CSN 67 3015-1983 Testing of flash point of paints and varnishes in a closed cup Abel-Pensky
  • CSN 34 7007-1964 Power conductors and cables. Testing.
  • CSN ISO 9944:1994 Plastics. Phenolic resins. Determination of electrical conductivity of resin extracts

British Standards Institution (BSI), Conductivity test cup

  • BS EN 61788-11:2003 Superconductivity - Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors
  • BS EN 61788-4:2007 Superconductivity - Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
  • BS EN 27888:1993 Water quality. Method for the determination of electrical conductivity
  • BS EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics
  • PD ISO/TR 6307:2023 Effect of conductivity on multipass testing as per ISO 4548-12:2017
  • BS DD IEC/PAS 61338-1-5:2010 Waveguide type dielectric resonators - General information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency
  • BS EN 61338-1-5:2015 Waveguide type dielectric resonators. General information and test conditions. Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency
  • BS EN ISO 284:2012 Conveyor belts. Electrical conductivity. Specification and test method
  • BS ISO 23331:2021 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for total electrical conductivity of conductive fine ceramics
  • BS EN ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
  • 21/30427395 DC BS EN ISO 3915. Plastics. Measurement of resistivity of conductive plastics
  • BS EN ISO 3915:2022 Tracked Changes. Plastics. Measurement of resistivity of conductive plastics
  • PD IEC TR 60747-5-12:2021 Semiconductor devices. Optoelectronic devices. Light emitting diodes. Test method of LED efficiencies
  • BS EN 61788-7:2002 Superconductivity - Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
  • BS EN 61788-7:2007 Superconductivity - Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
  • BS EN 60754-2:2014+A1:2020 Test on gases evolved during combustion of materials from cables - Determination of acidity (by pH measurement) and conductivity
  • BS EN IEC 61788-7:2020 Superconductivity - Electronic characteristic measurements. Surface resistance of high-temperature superconductors at microwave frequencies
  • BS EN 61788-16:2013 Superconductivity. Electronic characteristic measurements. Power-dependent surface resistance of superconductors at microwave frequencies
  • 20/30376386 DC BS EN ISO 23331. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for total electrical conductivity of conductive fine ceramics
  • 22/30443678 DC BS EN 60749-34-1. Semiconductor devices. Mechanical and climatic test methods - Part 34-1. Power cycling test for power semiconductor module
  • BS ISO 1853:2011 Conducting and dissipative rubbers, vulcanized or thermoplastic. Measurement of resistivity
  • BS EN 61788-7:2006 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
  • BS 7755-3.4:1995 Soil quality. Chemical methods. Determination of the specific electrical conductivity
  • BS IEC 62830-5:2021 Semiconductor devices. Semiconductor devices for energy harvesting and generation. Test method for measuring generated power from flexible thermoelectric devices
  • BS EN IEC 63373:2022 Dynamic on-resistance test method guidelines for GaN HEMT based power conversion devices
  • BS EN IEC 61788-23:2021 Tracked Changes. Superconductivity. Residual resistance ratio measurement. Residual resistance ratio of cavity-grade Nb superconductors
  • BS EN 60754-2:2014 Test on gases evolved during combustion of materials from cables. Determination of acidity (by pH measurement) and conductivity

BE-NBN, Conductivity test cup

  • NBN-EN 27888-1994 Water quality. Determination of electrical conductivity (ISO 7888: 1985)

BR-ABNT, Conductivity test cup

European Committee for Standardization (CEN), Conductivity test cup

  • EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022)
  • EN ISO 3915:1999 Plastics - Measurement of Resistivity of Conductive Plastics
  • EN 27888:1993 Water quality; determination of electrical conductivity (ISO 7888:1985)
  • EN ISO 15091:2020 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2019)
  • EN ISO 15091:2012 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2012)
  • EN ISO 8031:2020 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2020)
  • EN ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
  • prEN ISO 3915:2021 Plastics - Measurement of resistivity of conductive plastics (ISO/DIS 3915:2021)
  • EN 13038:1999 Soil Improvers and Growing Media - Determination of Electrical Conductivity
  • EN ISO 284:2003 Conveyor belts - Electrical conductivity - Specification and test method ; ISO 284:2003
  • EN 20284:1993 Conveyor Belts - Electrical Conductivity - Specification and Method of Test (ISO 284: 1982) Superseded by EN ISO 284:2003
  • EN 13038:2011 Soil improvers and growing media - Determination of electrical conductivity
  • prEN 20284-1991 Conveyor belts; electrical conductivity; specification and method of test (ISO 284:1982)

ES-UNE, Conductivity test cup

  • UNE-EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022)
  • UNE-EN ISO 15091:2020 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2019)
  • UNE-EN 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies (Endorsed by AENOR in May of 2013.)
  • UNE-EN 61338-1-5:2015 Waveguide type dielectric resonators - Part 1-5: General information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency (Endorsed by AENOR in October of 2015.)
  • UNE-EN 61788-14:2010 Superconductivity -- Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices (Endorsed by AENOR in November of 2010.)
  • UNE-ISO 6587:2008 ERRATUM:2008 Paper, board and pulps. Determination of conductivity of aqueous extracts.
  • UNE-EN IEC 63373:2022 Dynamic on-resistance test method guidelines for GaN HEMT based power conversion devices (Endorsed by Asociación Española de Normalización in May of 2022.)

Group Standards of the People's Republic of China, Conductivity test cup

Professional Standard - Ocean, Conductivity test cup

  • HY/T 267-2018 Testing method of seawater conductivity measuring instrument

Professional Standard - Electricity, Conductivity test cup

  • DL/T 1323-2014 Guide for measurement of wide-frequency AC voltage withstand test on site
  • DL/T 1207-2013 Test method for on-line conductivity measurement of purity water for power plant
  • DL/T 1201-2013 Test method for on-line pH measurement of water of low conductivity for power plant
  • DL/T 1356-2014 Online measurement method of cation conductivity deducted the impact of phosphate in boiler water
  • DL/T 1602-2016 On-line measurement method for degassed hydrogen conductivity of pure water in power plants

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Conductivity test cup

  • GB/T 35392-2017 Non-destructive testing—Test method for determining electrical conductivity using the electromagnetic (eddy-current) method
  • GB/T 33328-2016 Paints and varnishes—Determination of electrical conductivity and resistance

TR-TSE, Conductivity test cup

  • TS 2734-1977 Conducting Ind Intistatic Rubbers - Measurement Of Resistivity

American Petroleum Institute (API), Conductivity test cup

NL-NEN, Conductivity test cup

  • NEN-ISO 7888:1994 Water quality.Determination of electrical conductivity(ISO 7888:1985)
  • NEN 6591-1990 Rainwater- Determination of electrical conductivity by continuous flow analysis
  • NEN-ISO 284:1993 Conveyor belts. Electrical conductivity. Specification and method of test (ISO 284:1982)

International Electrotechnical Commission (IEC), Conductivity test cup

  • IEC 61788-4:2001 Superconductivity - Part 4: Residual resistance ratio measurement; Residual resistance ratio of Nb-Ti composite superconductors
  • IEC 61788-11:2011 Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb<(Index)3>Sn composite superconductors
  • IEC 61788-4:2007 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
  • IEC 61788-4:2011 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
  • IEC 63373:2022 Dynamic on-resistance test method guidelines for GaN HEMT based power conversion devices
  • IEC 61788-4:2016 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
  • IEC 61788-11:2003 Superconductivity - Part 11: Residual resistance ratio measurement; Residual resistance ratio of Nb<(Index)3>Sn composite superconductors
  • IEC 61788-14:2010 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
  • IEC 61338-1-5:2015 Waveguide type dielectric resonators - Part 1-5: General information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave
  • IEC 61788-7:2002 Superconductivity - Part 7: Electronic characteristic measurements; Surface resistance of superconductors at microwave frequencies
  • IEC 61788-7:2006 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies

European Committee for Electrotechnical Standardization(CENELEC), Conductivity test cup

  • EN 61788-11:2011 Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors
  • EN 61788-4:2011 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductor
  • EN 61788-4:2016 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
  • EN 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies
  • EN 61338-1-5:2015 Waveguide type dielectric resonators - Part 1-5: General information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency
  • EN 61788-14:2010 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
  • EN 61788-7:2006 Superconductivity Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies

CENELEC - European Committee for Electrotechnical Standardization, Conductivity test cup

  • EN 61788-11:2003 Superconductivity Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors
  • EN 61788-4:2001 Superconductivity Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
  • EN 61788-4:2007 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
  • EN 61788-7:2002 Superconductivity Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies

CO-ICONTEC, Conductivity test cup

Gansu Provincial Standard of the People's Republic of China, Conductivity test cup

  • DB62/T 2632-2015 Conductivity Method for Determination of Vitality of Alfalfa Seeds

Electronic Components, Assemblies and Materials Association, Conductivity test cup

  • EIA_ECA-364-54A-1999 TP-54A Magnetic Permeability Test Procedure for Electrical Connectors, Contacts, and Sockets

ECIA - Electronic Components Industry Association, Conductivity test cup

  • EIA/ECA-364-54A-1999 TP-54A Magnetic Permeability Test Procedure for Electrical Connectors@ Contacts@ and Sockets
  • EIA-364-54A-1999 TP-54A Magnetic Permeability Test Procedure For Electrical Connectors@ Contacts@ and Sockets

Professional Standard - Speciality, Conductivity test cup

  • ZB G72002-1989 Determination of conductivity of water or aqueous solutions for surfactant tests

工业和信息化部, Conductivity test cup

  • JB/T 13940-2020 Non-destructive testing instrument eddy current conductivity detector

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Conductivity test cup

PL-PKN, Conductivity test cup

  • PN T04850-1974 Transmiliing tubes Elec?rical ?es?s
  • PN C82055-11-1989 Test methods of pressed carbon products Determination of thermal specific conductivity with comparative method
  • PN E04160 ArkusZ54-1973 Electric cables Me?hods of ?esting Te?t for resistant againt? gluing ol con- duc?ors
  • PN E04160 ArkusZ76-1973 Electric cables Me?hods of testing Power factor and capacitance power cables test
  • PN E04160-68-1988 Electric cables Methods of test Electrical test of conducting polymeric screen

Society of Automotive Engineers (SAE), Conductivity test cup

  • SAE ARP891A-1976 Determination of Aluminum Alloy Tempers Through Electrical Conductivity Measurements (Eddy Current)
  • SAE ARP891A-2002 Determination of Aluminum Alloy Tempers Through Electrical Conductivity Measurement (Eddy Current)
  • SAE ARP891-1967 DETERMINATION OF ALUMINUM ALLOY TEMPERS THROUGH ELECTRICAL CONDUCTIVITY MEASUREMENT (EDDY CURRENT)
  • SAE AMS2658B-2003 Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts
  • SAE AMS2658D-2016 Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts

GM North America, Conductivity test cup

HU-MSZT, Conductivity test cup

Institute of Electrical and Electronics Engineers (IEEE), Conductivity test cup

  • IEEE 680-1978 IEEE Standard Techniques for Determination of Germanium Semiconductor Detector Gamma-Ray Efficiency Using a Standard Marinelli (Reentrant) Beaker Geometry
  • ANSI/IEEE Std 680-1978 IEEE Standard Techniques for Determination of Germanium Semiconductor Detector Gamma-Ray Efficiency Using a Standard Marinelli (Reentrant) Beaker Geometry
  • IEEE Std 356-1974 IEEE Guide for Radio Methods for Measuring Earth Conductivity

IN-BIS, Conductivity test cup

SAE - SAE International, Conductivity test cup

  • SAE ARP891B-2006 Determination of Aluminum Alloy Tempers Through Electrical Conductivity Measurement (Eddy Current)
  • SAE AMS2658A-1991 Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts

Professional Standard - Forestry, Conductivity test cup

  • LY/T 1616-2004 Determination of electric conductivity of aqueous extract from activated carbon

Professional Standard - Non-ferrous Metal, Conductivity test cup

  • YS/T 478-2005 The method for electrical conductivity measurement of copper and copper alloys by use of eddy current

Professional Standard - Geology, Conductivity test cup

  • DZ/T 0064.6-1993 Determination of electrical conductivity by groundwater quality inspection method

Professional Standard - Agriculture, Conductivity test cup

  • 2349药典 二部-2010 Appendix Ⅷ S Determination of conductivity of pharmaceutical water
  • 81药典 四部-2020 0600 Determination of physical constants 0681 Determination of electrical conductivity of pharmaceutical water
  • 100药典 四部-2015 0600 Determination of physical constants 0681 Determination of electrical conductivity of pharmaceutical water

ES-AENOR, Conductivity test cup

IEC - International Electrotechnical Commission, Conductivity test cup

  • PAS 61338-1-5-2010 Waveguide type dielectric resonators – Part 1-5: General information and test conditions – Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency (Edition 1.0)

ZA-SANS, Conductivity test cup

  • SANS 11853:2003 Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement of resistivity

United States Navy, Conductivity test cup

  • NAVY MIL-HDBK-704-5-2004 GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS THREE PHASE, VARIABLE FREQUENCY, 115 VOLT ( PART 5 OF 8 PARTS )
  • NAVY MIL-HDBK-704-6-2004 GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS SINGLE PHASE, 60 HZ, 115 VOLT (PART 6 OF 8 PARTS)
  • NAVY MIL-HDBK-704-7-2004 GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS 270 VDC (PART 7 OF 8 PARTS)
  • NAVY MIL-HDBK-704-8-2004 GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS 28 VDC (PART 8 OF 8 PARTS)
  • NAVY MIL-HDBK-704-1-2004 GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS ( PART 1 OF 8 PARTS )
  • NAVY MIL-HDBK-704-2-2004 GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS SINGLE PHASE, 400 HZ, 115 VOLT ( PART 2 OF 8 PARTS )
  • NAVY MIL-HDBK-704-3-2004 GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS THREE PHASE, 400 HZ, 115 VOLT ( PART 3 OF 8 PARTS )
  • NAVY MIL-HDBK-704-4-2004 GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS SINGLE PHASE, VARIABLE FREQUENCY, 115 VOLT ( PART 4 OF 8 PARTS )

FI-SFS, Conductivity test cup

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Conductivity test cup

  • IEEE N42.31-2003 Measurement Procedures for Resolution and Efficiency of Wide-Bandgap Semiconductor Detectors of Ionizing Radiation

Professional Standard - Machinery, Conductivity test cup

  • JB/T 8277-1999 Preparation method of standard solution for the measurement of conductivity meter

Tianjin Provincial Standard of the People's Republic of China, Conductivity test cup

  • DB12/T 729-2017 Method for Determination of pH and Conductivity of Green Planting Substrate

YU-JUS, Conductivity test cup

  • JUS G.E0.049-1977 Product on polymer bases. Measurement of resistivity on conducting and antistatic test pieces from polimeric materials
  • JUS N.C0.051-1985 Electric povver and lighting. Testing of insulated conductors andcables. Tensile strength andelongation atbreak

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Conductivity test cup

  • PREN 4426-1998 Aerospace Series Textiles Test Method Determination of Conductivity and pH of Aqueous Extracts

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Conductivity test cup

国家机械工业局, Conductivity test cup

Defense Logistics Agency, Conductivity test cup

PT-IPQ, Conductivity test cup

  • NP 3190-1987 Paper, board and pulps Determination of conductivity of aqueous extracts

Shanxi Provincial Standard of the People's Republic of China, Conductivity test cup

  • DB14/T 1382-2017 Determination of Total Water-Soluble Salt in Saline Soil--Conductivity Method

Jiangsu Provincial Standard of the People's Republic of China, Conductivity test cup

  • DB32/T 4027-2021 Dynamic four-probe method for the determination of electrical conductivity of graphene powder

Standard Association of Australia (SAA), Conductivity test cup

  • AS/NZS 1660.3:1998 Test methods for electric cables, cords and conductors - Electrical tests

International Telecommunication Union (ITU), Conductivity test cup

  • ITU-T G.243-1993 PROTECTION OF PILOTS AND ADDITIONAL MEASURING FREQUENCIES AT POINTS WHERE THERE IS A THROUGH - CONNECTION

CU-NC, Conductivity test cup

  • NC 66-100-1988 Electronic and Electrotechical Industry. Power Conductors Electric Tests




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved