ZH
RU
ES

Detection with multispectral techniques

Detection with multispectral techniques, Total:277 items.

In the international standard classification, Detection with multispectral techniques involves: Analytical chemistry, Farming and forestry, Photography, Petroleum, petroleum products and natural gas handling equipment, Testing of metals, Information technology (IT) in general, Road engineering, General methods of tests and analysis for food products, Vacuum technology, Protection against crime, Graphic technology, Water quality, Non-ferrous metals, Edible oils and fats. Oilseeds, Powder metallurgy, Applications of information technology, Metalliferous minerals, Non-destructive testing, Iron and steel products, Environmental protection, Road vehicle systems, Computer graphics, Astronomy. Geodesy. Geography, Linear and angular measurements, Installations in buildings, Integrated circuits. Microelectronics, Milk and milk products, Petroleum products in general, Ferrous metals, Pharmaceutics, Microbiology, Ceramics, Fibre optic communications, Optics and optical measurements, Electrical engineering in general, Radiation measurements, Nuclear energy engineering, Fuels, Electronic components in general, Electrical and electronic testing, Networking, Soil quality. Pedology, Internal combustion engines, Diagnostic, maintenance and test equipment, Air quality, Open systems interconnection (OSI), Cereals, pulses and derived products, Products of the chemical industry.

Fujian Provincial Standard of the People's Republic of China, Detection with multispectral techniques

DB35/T 1564-2016 Technical Requirements for Portable Rapid Raman Spectroscopy Detector

Chongqing Provincial Standard of the People's Republic of China, Detection with multispectral techniques

DB50/T 1449-2023 Technical regulations for hyperspectral detection of organic matter in tea garden soil

Society of Automotive Engineers (SAE), Detection with multispectral techniques

SAE AS6171/8-2022 Techniques for Suspect/Counterfeit EEE Parts Detection by Raman Spectroscopy Test Methods
SAE AS6171/9-2022 Techniques for Suspect/Counterfeit EEE Parts Detection by Fourier Transform Infrared Spectroscopy (FTIR) Test Methods
SAE AS6171/3-2022 Techniques for Suspect/Counterfeit EEE Parts Detection by X-Ray Fluorescence Test Methods

SAE - SAE International, Detection with multispectral techniques

SAE AS6171/8-2016 Techniques for Suspect/Counterfeit EEE Parts Detection by Raman Spectroscopy Test Methods
SAE AS6171/9-2016 Techniques for Suspect/Counterfeit EEE Parts Detection by Fourier Transform Infrared Spectroscopy (FTIR) Test Methods
SAE AS6171/3-2016 Techniques for Suspect/Counterfeit EEE Parts Detection by X-ray Fluorescence Test Methods

German Institute for Standardization, Detection with multispectral techniques

DIN 4512-9:1993 Photographic sensitometry, determination of optical density; spectral conditions
DIN EN ISO 22959:2009-10 Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons by on-line donor-acceptor complex chromatography and HPLC with fluorescence detection (ISO 22959:2009); German version EN ISO 22959:2009
DIN EN 61300-3-29:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components (I
DIN 38414-23:2002 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 23: Determination of 15 polycyclic aromatic hydrocarbons (PAH) by high performance liquid chromatography (HPLC) and fluorescence detection
DIN EN 13806-2:2023-07 Foodstuffs - Determination of trace elements - Part 2: Determination of total mercury in foodstuffs by atomic fluorescence spectrometry (AFS) - cold vapour technique after pressure digestion; German and English version prEN 13806-2:2023 / Note: Date of...
DIN EN 62321-6:2016 Determination of certain substances in electrotechnical products - Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS) (IEC 62321-6:2015); German version EN 62321-6:2015
DIN EN ISO 11969:1996 Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique) (ISO 11969:1996); German version EN ISO 11969:1996
DIN 38407-8:1995 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 8: Determination of 6 polynuclear aromatic hydrocarbons (PAH) in water by high performance liquid chromatography (HPLC) with fl
DIN EN 62321-4:2014 Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS (IEC 62321-4:2013); German version EN 62321-4:2014
DIN 38414-21:1996 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 21: Determination of 6 polynuclear aromatic hydrocarbons (PAH) by high performance liquid chromatography (HPLC) with fluorescence detectio
DIN EN 13783:2002 Foodstuffs - Detection of irradiated food using Direct Epifluorescent Filter Technique/Aerobic Plate Count (DEFT/APC) - Screening method; German version EN 13783:2001
DIN EN 62321-5:2014 Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS (IEC 62321-5:2013); German version EN 62321-5:2014
DIN EN 62321-4:2018 Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS (IEC 62321-4:2013 + A1:2017); German version EN 62321-4:2014 + A1:2017
DIN EN ISO 23821:2022-12 Cosmetics - Analytical methods - Determination of traces of mercury in cosmetics by atomic absorbtion spectrometry (AAS) cold vapour technology after pressure digestion (ISO 23821:2022); German version EN ISO 23821:2022
DIN 38407-43:2014 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 43: Determination of selected easily volatile organic compounds in water - Method using gas chromatography and mass spectrometr
DIN V 38407-11:1995 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 11: Determination of selected organic plant protecting agents by Automated Multiple Development (AMD)-technique (F 11)
DIN EN ISO 23821:2022 Cosmetics - Analytical methods - Determination of traces of mercury in cosmetics by atomic absorbtion spectrometry (AAS) cold vapour technology after pressure digestion (ISO 23821:2022)

Professional Standard - Petroleum, Detection with multispectral techniques

SY/T 6880-2012 Technical code for spectrometric detection of steel material in high hydrogen sulfide gas field
SY 6880-2012 Technical specifications for spectral detection of steel materials in high hydrogen sulfide gas fields

国家能源局, Detection with multispectral techniques

SY/T 6880-2021 Technical specifications for spectral detection of steel materials in gas fields with high hydrogen sulfide content

Group Standards of the People's Republic of China, Detection with multispectral techniques

T/SDIE 16-2021 Technical Guidelines for Multispectral Remote Sensing Monitoring of Pine Wood Nematode Discoloration Standing Trees
T/FJBR 007-2023 Rapid detection of carbendazim, benomyl and thiabendazole in fruits and vegetables by Raman spectroscopy
T/SAASS 1-2021 Application rules of hyperspectral artificial intelligence technology in non-destructive detection of fruit pesticide residues
T/SDAS 267-2021 Application rules of hyperspectral artificial intelligence technology in non-destructive detection of fruit pesticide residues
T/SHZSAQS 015-2020 Technical regulations for efficient detection of SNP sites of Fecb gene in sheep with multiple fetuses by real-time fluorescent quantitative PCR
T/ZZB 2537-2021 Multi-sensor parking detector based on NB-IoT communication technology
T/CSEE 0166-2020 Technical specification for optoelectronic integrated detection device for optical fiber composite low-voltage cables
T/SICA 003-2022 Technical specification for dual-frequency multi-interface temperature and humidity detection tag chip based on RFID transmission and storage technology
T/CAEPI 28-2020 Technical requirements for on-line detection system of dioxin laser ionization time-of-flight mass spectrometry in domestic waste incineration flue gas
T/CSEE 0222-2021 Technical guidelines for UHF detection and separation of multiple partial discharge sources in oil-immersed transformers (reactors)
T/SSCIA 002.3-2023 Technical Specification for Multi-Identification Network Networking for Functional Unmanned Vehicles Part 3: Low-speed unmanned vehicle detection specification supporting multi-identifier network

HU-MSZT, Detection with multispectral techniques

Shanxi Provincial Standard of the People's Republic of China, Detection with multispectral techniques

DB14/T 2320-2021 Technical specification for rapid detection of road petroleum asphalt quality by infrared spectroscopy

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Detection with multispectral techniques

GB/T 23215-2008 Determination of paralytic shellfish posion in shellfish.HPLC-fluorescence detection method
GB/T 19267.3-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 3:Molecular fluorospectrometry
GB/T 19267.3-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 3: Molecular fluorospectrometry
GB/T 19437-2004 Graphic technology-Spectral measurement and colorimetric computation for graphic arts images
GB/T 19267.1-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 1:Infrared absorption spectrometry
GB/T 19267.4-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 4:Atomic emission spectrometry
GB/T 19267.5-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 5:Atomic absorption spectrometry
GB/T 19267.1-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 1: Infrared absorption spectrometry
GB/T 19267.4-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 4: Atomic emission spectrometry
GB/T 19267.5-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 5: Atomic absorption spectrometry
GB/T 19267.2-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 2:Ultraviolet-visible absorption spectroscopy
GB/T 19267.2-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 2: Ultraviolet-visible absorption spectroscopy
GB/T 16857.9-2022 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 9:CMMs with multiple probing systems
GB/T 16857.5-2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 5:CMMs using multiple-stylus probing systems
GB/T 16857.10-2022 Acceptance testing and re-inspection testing of product geometry specification (GPS) coordinate measuring system (CMS) Part 10: Laser tracker
GB/T 16857.8-2022 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 8: CMMs with optical distance sensors
GB/T 34899-2017 Micro-electromechanical system technology—Measuring method of microstructure surface stress based on Raman spectroscopy

Japanese Industrial Standards Committee (JISC), Detection with multispectral techniques

JIS Z 8754:1999 Vacuum technology -- Mass-spectrometer-type leak-detector calibration
JIS K 0400-61-20:2001 Water quality -- Determination of arsenic -- Atomic absorption spectrometric method (hydride technique)
JIS B 7440-9:2017 Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring systems (CMS) -- Part 9: CMMs with multiple probing systems
JIS B 7440-5:2013 Geometrical product specifications (GPS).Acceptance and reverification tests for coordinate measuring machines (CMM).Part 5: CMMs using single and multiple stylus contacting probing systems
JIS B 7440-5:2004 Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 5: CMMs using multiple-stylus probing systems
JIS B 7440-8:2015 Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring systems (CMS) -- Part 8: CMMs with optical distance sensors

Professional Standard - Public Safety Standards, Detection with multispectral techniques

GA/T 1067-2013 General technical requirements for liquids security inspection equipments based on Raman spectrometry

AENOR, Detection with multispectral techniques

UNE 37254:1986 LEAD. DETERMINATION OF ZINC CONTENT. SPECTROMETRIC METHOD ABSORPTION TECHNIQUE.
UNE 37251:1986 LEAD. DETERMINATION OF SILVER CONTENT. SPECTROMETRIC METHOD BY ATOMIC ABSORTION TECHNIQUE.
UNE 37255:1986 LEAD. DETERMINATION OF IRON CONTENT. SPECTROMETRIC METHOD BY ATOMIC ABSORTION TECHNIQUE.
UNE 37253:1986 LEAD. DETERMINATION OF COPPER CONTENT. SPECTROMETRIC METHOD BY ATOMIC ABSORPTION TECHNIQUE.
UNE 37256:1986 LEAD. DETERMINATION OF ANTIMONY CONTENT IN LEAD. SPECTROMETRIC METHODS BY ATOMIC ABSORPTION TECHNIQUE.
UNE-EN ISO 22959:2010 Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons by on-line donor-acceptor complex chromatography and HPLC with fluorescence detection (ISO 22959:2009)

ES-UNE, Detection with multispectral techniques

UNE 37254:1987 ERRATUM LEAD. DETERMINATION OF ZINC CONTENT. SPECTROMETRIC METHOD ABSORPTION TECHNIQUE.
ISO 24585-2:2023 Graphic technology — Multispectral imaging measurement and colorimetric computation for graphic arts and industrial application — Part 2: Requirements for decorative surfaces
UNE-EN ISO 23821:2023 Cosmetics - Analytical methods - Determination of traces of mercury in cosmetics by atomic absorbtion spectrometry (AAS) cold vapour technology after pressure digestion (ISO 23821:2022)

British Standards Institution (BSI), Detection with multispectral techniques

BS ISO 24585-1:2023 Graphic technology. Multispectral imaging measurement and colorimetric computation for graphic arts and industrial application - Parameters and measurement methods
BS ISO 24585-2:2023 Graphic technology. Multispectral imaging measurement and colorimetric computation for graphic arts and industrial application. Requirements for decorative surfaces
BS ISO 13655:2010 Graphic technology. Spectral measurement and colorimetric computation for graphic arts images
BS ISO 13655:2009 Graphic technology - Spectral measurement and colorimetric computation for graphic arts images
BS ISO 13655:2017 Graphic technology. Spectral measurement and colorimetric computation for graphic arts images
BS ISO 7981-2:2005 Water quality - Determination of polycyclic aromatic hydrocarbons (PAH) - Determination of six PAH by high-performance liquid chromatography with fluorescence detection after liquid-liquid extraction
BS ISO 7981-1:2005 Water quality - Determination of polycyclic aromatic hydrocarbons (PAH) - Determination of six PAH by high performance thin layer chromatography with fluorescence detection after liquid-liquid extraction
BS EN 62321-6:2015 Determination of certain substances in electrotechnical products. Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS)
23/30449567 DC BS ISO 24585-2. Graphic technology. Multispectral imaging measurement and colorimetric computation for graphic arts and industrial application - Part 2. Requirements for decorative surfaces
23/30449564 DC BS ISO 24585-1. Graphic technology. Multispectral imaging measurement and colorimetric computation for graphic arts and industrial application - Part 1. Parameters and measurement methods
PD IEC/TR 63100:2017 Transmitting equipment for radiocommunication. Radio-over-fibre technologies for spectrum measurement. 100-GHz spectrum measurement equipment
BS EN 61300-3-29:2006 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 3-29: Examinations and measurements — Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM com
BS EN 62321-5:2014 Determination of certain substances in electrotechnical products. Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
ISO 23256:2023 Water quality. Detection of selected congeners of polychlorinated dibenzo-p-dioxins and polychlorinated biphenyls. Method using a flow immunosensor technique
BS ISO 23256:2023 Water quality. Detection of selected congeners of polychlorinated dibenzo-p-dioxins and polychlorinated biphenyls. Method using a flow immunosensor technique
DD ENV 725-4-1994 Advanced technical ceramics. Methods of test for ceramic powders. Determination of oxygen content in aluminium nitride by XRF analysis
22/30386818 DC BS ISO 23256. Water quality. Detection of selected congeners of polychlorinated dibenzo-p-dioxins and polychlorinated biphenyls. Method using a flow immunosensor technique
BS EN 62321-3-1:2014 Determination of certain substances in electrotechnical products. Screening. Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry
DD ENV 14226:2002 Advanced technical ceramics. Test methods for ceramic powders. Determination of calcium, magnesium, iron and aluminium in silicon nitride by using flame atomic absorption spectroscopy (FAAS) or inductively coupled plasma atomic emission spectroscopy (I...
23/30472705 DC BS EN 13806-2. Foodstuffs. Determination of trace elements - Part 2. Determination of total mercury in foodstuffs by atomic fluorescence spectrometry (AFS). Cold vapour technique after pressure digestion
23/30409204 DC BS EN IEC 62321-3-1. DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - Part 3-1. Elemental Screening by X-ray fluorescence spectrometry
23/30464882 DC BS EN 17937. Regulated chemicals in products. Determination of the content of polycyclic aromatic hydrocarbons (PAHs) by gas chromatography coupled to mass-spectrometry in plastic and rubber in articles supplied to the general public that come…
BS ISO 21820:2021 Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet photoluminescence image test method for analysing polytypes of boron- and nitrogen-doped SiC crystals
20/30349837 DC BS ISO 21820. Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet photoluminescence image test method for analyzing polytypes of boron and nitrogen doped SiC crystals
BS EN 13783:2002 Foodstuffs - Detection of irradiated food using Direct Epifluorescent Filter Technique/Aerobic Plate Count (DEFT/APC) - Screening method
BS DD ENV 14226:2002 Advanced technical ceramics - Test methods for ceramic powders - Determination of calcium, magnesium, iron and aluminium in silicon nitride by using flame atomic absorption spectroscopy (FAAS) or inductively coupled plasma atomic emission spectroscopy (IC
BS EN ISO 23821:2022 Cosmetics. Analytical methods. Determination of traces of mercury in cosmetics by atomic absorbtion spectrometry (AAS) cold vapour technology after pressure digestion
BS ISO 23738:2021 Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement method of spectral reflectance of fine ceramic thin films under humid conditions
BS EN ISO 10360-10:2016 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS). Laser trackers for measuring point-to-point distances
BS PD CEN/TR 17474:2020 Cereals (wheat and barley). Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy
21/30393741 DC BS EN ISO 23821. Cosmetics. Analytical methods. Determination of traces of mercury in cosmetics by atomic absorbtion spectrometry (AAS) cold vapour technology after pressure digestion
20/30389596 DC BS ISO 23738. Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method of spectral reflectance of fine ceramics thin films under humid condition
BS EN ISO 10360-8:2013 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS). CMMs with optical distance sensors

CZ-CSN, Detection with multispectral techniques

CSN 75 7554-1998 Water quality - Determination of selected polynuclear aromatic hydrocarbons (PAH) - HPLC (FLD) and GC (MSD) methods
CSN 65 2062-1981 SODIUM HYDROXIDE TECHNICAL Atomic Absorbtion Speetroscopy for Determination of Copper
CSN 65 2068-1984 Sodium hydroxide technical. Atomic Absorbtion Spectroscopy fór Determination of Mercury

国家市场监督管理总局、中国国家标准化管理委员会, Detection with multispectral techniques

GB/T 41086-2021 General technical requirements for hazardous chemicals security inspection equipments based on Raman spectrometry
GB/T 41450-2022 Technical specification of multi-sensor consistency testing for unmanned aerial vehicle（UAV）borne low altitude remote sensing monitoring
GB/T 16857.901-2020 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 901: CMMs with multiple imaging probing system
GB/T 40069-2021 Nanotechnologies—Measurement of the number of layers of graphene-related two-dimensional (2D) materials—Raman spectroscopy method
GB/T 37131-2018 Nanotechnologies—Test method of semiconductor nanopowder using UV-Vis diffuse reflectance spectroscopy
GB/T 39518-2020 Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
GB/T 41212-2021 Nanotechnologies—5-(and 6)-Chloromethyl-2’,7’ Dichloro-dihydrofluorescein diacetate (CM-H2DCF-DA) assay for evaluating nanoparticle-induced intracellular reactive oxygen species (ROS) production in RAW 264.7 macrophage cell line

Korean Agency for Technology and Standards (KATS), Detection with multispectral techniques

KS I ISO 17993:2022 Water quality — Determination of 15 polycyclic aromatic hydrocarbons — PAH in water by HPLC with fluorescence detection after liquid-liquid extraction
KS I ISO 7981-1-2006(2011) Water quality－Determination of polycyclic aromatic hydrocarbons(PAH)－Part 1：Determination of six PAH by high performance thin-layer chromatography with fluorescence detection after liquid-liquid extra
KS I ISO 7981-2-2006(2011) Water quality－Determination of polycyclic aromatic hydrocarbons (PAH)－Part 2：Determination of six PAH by high-performance liquid chromatography with fluorescence detection after liquid-liquid extracti
KS X ISO 13655-2006(2016) Graphic technology－Spectral measurement and colorimetric computation for graphic arts images
KS X ISO 13655:2021 Graphic technology — Spectral measurement and colorimetric computation for graphic arts images
KS X ISO 13655-2006(2021) Graphic technology－Spectral measurement and colorimetric computation for graphic arts images
KS I ISO 9965:2008 Water quality－Determination of selenium－Atomic absorption spectrometric method (hydride technique)
KS I ISO 11969:2008 Water quality－Determination of arsenic－Atomic absorption spectrometric method(hydride technique)
KS I ISO 11969-2008(2018) Water quality－Determination of arsenic－Atomic absorption spectrometric method(hydride technique)
KS I ISO 9965-2008(2018) Water quality－Determination of selenium－Atomic absorption spectrometric method (hydride technique)
KS X ISO 13655:2006 Graphic technology-Spectral measurement and colorimetric computation for graphic arts images
KS I ISO 17993:2008 Water quality－Determination of 15 polycyclic aromatic hydrocarbons(PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction

KR-KS, Detection with multispectral techniques

KS I ISO 17993-2022 Water quality — Determination of 15 polycyclic aromatic hydrocarbons — PAH in water by HPLC with fluorescence detection after liquid-liquid extraction
KS X ISO 13655-2021 Graphic technology — Spectral measurement and colorimetric computation for graphic arts images

American Society for Testing and Materials (ASTM), Detection with multispectral techniques

ASTM E1613-04 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
ASTM D8431-22 Standard Test Method for Detection of Water-soluble Petroleum Oils by A-TEEM Optical Spectroscopy and Multivariate Analysis
ASTM E400-97 Standard Test Method for Analysis of Ores, Minerals, and Rocks by the Fire Assay Preconcentration Optical Emission Spectroscopy
ASTM E1086-94(2005) Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique
ASTM G178-16(2023) Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
ASTM E485-94(2005) Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Blast Furnace Iron by the Point-to-Plane Technique
ASTM E485-94(1999)e1 Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Blast Furnace Iron by the Point-to-Plane Technique
ASTM F2605-08e1 Standard Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
ASTM G178-16 Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
ASTM D8368-21 Standard Test Method for Determination of Totals of Saturate, Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
ASTM D8368-22 Standard Test Method for Determination of Totals of Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectr
ASTM D8368-22a Standard Test Method for Determination of Totals of Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectr
ASTM F2602-08 Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
ASTM F2602-18 Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
ASTM F2605-08 Standard Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
ASTM F2605-16 Standard Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
ASTM E1086-08 Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique
ASTM E261-16(2021) Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
ASTM F2602-13 Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection lpar;SEC-MALSrpar;
ASTM E1523-09 Standard Guide to Charge Control and Charge Referencing Techniques in X-Ray Photoelectron Spectroscopy
ASTM E1613-12 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
ASTM E1086-94(2000) Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique
ASTM E227-90(1996) Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique (Withdrawn 2002)
ASTM E404-95(2000)e1 Standard Test Method for Spectrographic Determination of Boron In Carbon and Low Alloy Steel by the Point-To-Plane Technique (Withdrawn 2006)
ASTM E402-02 Standard Test Method for Spectrographic Analysis of Uranium Oxide (U3O8)by Gallium Oxide-Carrier Technique (Withdrawn 2007)
ASTM E1728-99 Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques
ASTM E607-90(1996) Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique, Nitrogen Atmosphere
ASTM E607-02 Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere
ASTM D6966-13 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals

GOSTR, Detection with multispectral techniques

GOST 34616-2019 Food products, food raw materials. Determination of polycyclic aromatic hydrocarbons mass range by high-performance liquid chromatography with fluorometric detection
GOST 34285-2017 Food products, food raw materials. Method for the detection of chemotherapeutic drugs by the hemiluminescence immunoenzymatic assay with the use of biochip technology

Heilongjiang Provincial Standard of the People's Republic of China, Detection with multispectral techniques

DB23/T 3229-2022 Technical rules for diagnosis of rice leaf blast disease based on UAV multispectral images

International Organization for Standardization (ISO), Detection with multispectral techniques

ISO 22959:2009 Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons by on-line donor-acceptor complex chromatography and HPLC with fluorescence detection
ISO 3028:1974 Photography — Expendable photoflash lamps — Determination of relative spectral energy distribution for calculation of spectral distribution index
ISO 13655:2009 Graphic technology - Spectral measurement and colorimetric computation for graphic arts images
ISO 13655:2017 Graphic technology - Spectral measurement and colorimetric computation for graphic arts images
ISO 24585-1:2023 Graphic technology — Multispectral imaging measurement and colorimetric computation for graphic arts and industrial application — Part 1: Parameters and measurement methods
ISO 11969:1996 Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique)
ISO 13655:1996 Graphic technology - Spectral measurement and colorimetric computation for graphic arts images
ISO 9965:1993 Water quality; determination of selenium; atomic absorption spectrometric method (hydride technique)
ISO 5842:2022 Powder metallurgy — Hot isostatic pressing — Argon detection using gas chromatography and mass spectrometry techniques
ISO/TS 10867:2019 Nanotechnologies — Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
ISO 9874:2006/Cor 1:2007 Milk - Determination of total phosphorus content - Method using molecular absorption spectrometry; Technical Corrigendum 1
ISO 14596:1998/Cor 1:1999 Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry; Technical corrigendum 1
ISO 10560:1993/Cor 1:1994 Milk and milk products; detection of listeria monocytogenes; technical corrigendum 1
ISO 17993:2002 Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction
ISO 21847-1:2007 Nuclear fuel technology - Alpha spectrometry - Part 1: Determination of neptunium in uranium and its compounds
ISO 21847-2:2007 Nuclear fuel technology - Alpha spectrometry - Part 2: Determination of plutonium in uranium and its compounds
ISO 21847-3:2007 Nuclear fuel technology - Alpha spectrometry - Part 3: Determination of uranium 232 in uranium and its compounds
ISO 23256 Water quality — Detection of selected congeners of polychlorinated dibenzo-p-dioxins and polychlorinated biphenyls — Method using a flow immunosensor technique
ISO 14595:2003/Cor 1:2005 Analyse par microfaisceaux - Microanalyse par sonde à électrons - Lignes directrices pour les spécifications des matériaux de référence certifiés (CRM) RECTIFICATIF TECHNIQUE 1 (Première édition)
ISO 14673-1:2001/Cor 1:2002 Milk and milk products — Determination of nitrate and nitrite contents — Part 1: Method using cadmium reduction and spectrometry — Technical Corrigendum 1
ISO 10360-5:2000 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using multiple-stylus probing systems
ISO 10360-5:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems
ISO/IEC 8802-3:1996 Information technology - Telecommunication and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer
ISO/IEC 8802-3:1993 Information technology — Local and metropolitan area networks — Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications
ISO/IEC 8802-3:1992 Information technology — Local and metropolitan area networks — Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications
ISO 10360-10:2016 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances
ISO 10360-10:2021 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers
ISO/CD 6223:2023 Fine Ceramics (advanced ceramics, advanced technical ceramics)- Test method for air purification performance of photocatalytic building/construction materials by an in-situ FTIR spectra analysis with a recirculating air flow photoreactor ; Gaseous Toluene

Association Francaise de Normalisation, Detection with multispectral techniques

NF EN ISO 13588:2019 Essais non destructif des assemblages soudés - Contrôle par ultrasons - Utilisation de la technique multi-éléments automatisés
NF T90-090*NF EN ISO 17993:2004 Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction.
NF EN ISO 20601:2018 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Utilisation de la technique multi-éléments automatisés pour les composants en acier à paroi mince
NF T90-115:2004 Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction.
NF X44-013:1983 Sodium chloride aerosol test for filters using flame photometric technique.
NF A06-377*NF EN 10315:2006 Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near by technique.
NF M60-462-1*NF ISO 21847-1:2007 Nuclear fuel technology - Alpha spectrometry - Part 1 : determination of neptunium in uranium and its compounds.
NF M60-462-2*NF ISO 21847-2:2007 Nuclear fuel technology - Alpha spectrometry - Part 2 : determination of plutonium in uranium and its compounds
NF C93-903-29:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29 : examinations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components.
NF ISO 21847-3:2007 Technologie du combustible nucléaire - Spectrométrie alpha - Partie 3 : détermination de l'uranium 232 dans l'uranium et ses composés
NF M60-462-3*NF ISO 21847-3:2007 Nuclear fuel technology - Alpha spectrometry - Part 3 : determination of uranium 232 in uranium and its compounds.
NF E11-150-5:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5 : CMMs using single and multiple stylus contacting probing systems.
NF EN ISO 4761:2022 Essais non destructifs des assemblages soudés - Technique ultrasons multi-éléments (UT-PA) pour les composants en acier à paroi mince - Niveaux d'acceptation
NF C05-100-4*NF EN 62321-4:2014 Determination of certain substances in electrotechnical products - Part 4 : mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS
NF C05-100-5*NF EN 62321-5:2014 Determination of certain substances in electrotechnical products - Part 5 : cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
NF EN 302065-4-4:2022 Dispositifs à courte portée (SRD) utilisant la technologie à bande ultra large (ULB) - Norme harmonisée pour l'accès au spectre radioélectrique - Partie 4 : dispositifs de détection de matériau - Sous-partie 4 : applications de détection de m...
NF C05-100-3-1*NF EN 62321-3-1:2014 Determination of certain substances in electrotechnical products - Part 3-1 : screening - Lead, mercury, cadmium, total chromium and total bromine using X-ray Fluorescence Spectrometry
NF EN ISO 23821:2022 Cosmétiques - Méthodes d'analyse - Dosage des traces de mercure dans les cosmétiques par la technique de spectrométrie d'absorption atomique (SAA) de vapeur froide après digestion sous pression
FD CEN/TR 17474:2021 Céréales (blé et orge) - Rapport technique des essais interlaboratoires pour la détermination de la teneur en eau et en protéines par spectroscopie proche infrarouge sur des grains entiers
FD V03-769*FD CEN/TR 17474:2021 Cereals (wheat and barley) - Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy

VN-TCVN, Detection with multispectral techniques

TCVN 6626-2000 Water quality.Determination arsenic.Atomic absorption spectrometric method (hydride technique)
TCVN 6183-1996 Water quality.Determination of selenium.Atomic absorption spectrometry method (hydride technique)

Danish Standards Foundation, Detection with multispectral techniques

DS/EN ISO 22959:2009 Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons by on-line donor-acceptor complex chromatography and HPLC with fluorescence detection
DS/EN 61300-3-29/Corr.:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components
DS/EN 61300-3-29:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components
DS/CEN/TR 17474:2020 Cereals (wheat and barley) – Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy
DS/ENV 14226:2002 Advanced technical ceramics - Test methods for ceramic powders - Determination of calcium, magnesium, iron and aluminium in silicon nitride by using flame atomic absorption spectroscopy (FAAS) or inductively coupled plasma atomic emission spectroscopy (IC

Lithuanian Standards Office , Detection with multispectral techniques

LST ISO 9965:1998 Water quality. Determination of selenium. Atomic absorption spectrometric method (hydride technique)
LST EN ISO 22959:2009 Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons by on-line donor-acceptor complex chromatography and HPLC with fluorescence detection (ISO 22959:2009)
LST EN ISO 11969:2000 Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique) (ISO 11969:1996)
LST EN 61300-3-29-2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components (I
LST EN 61300-3-29-2006/AC-2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components (I
LST EN 62321-4-2014 Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS (IEC 62321-4:2013)
LST EN 62321-5-2014 Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS (IEC 62321-5:2013)
LST L ENV 14226-2004 Advanced technical ceramics - Test methods for ceramic powders - Determination of calcium, magnesium, iron and aluminium in silicon nitride by using flame atomic absorption spectroscopy (FAAS) or inductively coupled plasma atomic emission spectroscopy (IC
LST EN 62321-3-1-2014 Determination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry (IEC 62321-3-1:2013)

未注明发布机构, Detection with multispectral techniques

BS EN ISO 11969:1996(2008)*BS 6068-2.55:1996 Water quality — Determination of arsenic — Atomic absorption spectrometric method (hydride technique)
ISO 7530-1:1990/Cor 1:1992 Nickel alloys — Flame atomic absorption spectrometric analysis — Part 1: General requirements and sample dissolution
ISO 1391-3:1976/Cor 1:1977 Test Methods for Industrial Paraformaldehyde Part 3: Determination of Iron Content 2,2'-Bipyridine Photometric Method Technical Corrigendum 1

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Detection with multispectral techniques

GB/T 33213-2016 Non-destructive testing—Practice for strain monitoring based on fiber sensing technology
GB/T 33218-2016 Non-destructive testing—Practice for equipment health monitoring based on fiber sensing technology
GB/T 16857.5-2017 Geometrical product specifications(GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 5:CMMs using single or multiple stylus contacting probing systems

American National Standards Institute （ANSI), Detection with multispectral techniques

ANSI CGATS.5-2009 Graphic technology - Spectral measurement and colorimetric computation for graphic arts images

European Committee for Standardization (CEN), Detection with multispectral techniques

EN ISO 11969:1996 Water Quality - Determination of Arsenic - Atomic Absorption Spectrometric Method (Hydride Technique) (ISO 11969 : 1996)
EN 725-4:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis
CEN/TR 17474:2020 Cereals (wheat and barley) - Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy
EN ISO 10360-5:2000 Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 5: CMMs Using Multiple-Stylus Probing Systems ISO 10360-5:2000
EN ISO 10360-5:2020 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or sc
EN ISO 10360-5:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10360-5:2010)
PD CEN/TR 17474:2020 Cereals (wheat and barley) - Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy
EN ISO 10360-10:2021 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021)
EN ISO 10360-10:2016 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances

Professional Standard - Agriculture, Detection with multispectral techniques

NY/T 719.3-2003 Environmental impact testing of genetically modified soybean.Part 3:testing the effects on biodiversity
NY/T 720.3-2003 Environmental impact testing of genetically modified maize.Part 3:testing the effects on biodiversity
NY/T 721.3-2003 Environmental impact testing of genetically modified oil seed rape。Part 3:testing the effects on biodiversity
水产品质量安全检验手册 4.1.2.3-2005 Chapter 4 Inspection of Toxic Substances in Aquatic Products Section 1 Overview 2. Routine techniques for detection of red tide toxins (3) Liquid chromatography

CENELEC - European Committee for Electrotechnical Standardization, Detection with multispectral techniques

EN 61300-3-29:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-29: Examinations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components (Inc

IEC - International Electrotechnical Commission, Detection with multispectral techniques

PAS 61300-3-29-2002 PRE-STANDARD Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-29: Examinations and Measurements - Measurement Techniques for Characterizing the Amplitude of the Spectral Transfer Function of DWDM

International Electrotechnical Commission (IEC), Detection with multispectral techniques

IEC 62321-6:2015 Determination of certain substances in electrotechnical products - Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS)
IEC 61300-3-29:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components
IEC PAS 61300-3-29:2002 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements; Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components

RU-GOST R, Detection with multispectral techniques

GOST R 55232-2012 Fixed-wavelength photometric detectors used in liquid chromatography and flow-injection analysis. General technical requirements and test methods
GOST 20759-1990 Diesel locomotive engines. Technical diagnostics and forecast of service life by means of oil spectral analysis. General requirements
GOST 33077-2014 Biodiesel fuel blends. Determination of fatty acid methyl esters (FAME) content using mid infrared spectroscopy (FTIR-ATR-PLS method)

European Telecommunications Standards Institute (ETSI), Detection with multispectral techniques

ETSI TR 102 763-2009 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics of Detect-And-Avoid (DAA) mitigation techniques for SRD equipment using Ultra Wideband (UWB) technology (V1.1.1)
ETSI TS 102 754-2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics of Detect And Avoid (DAA) mitigation techniques for SRD equipment using Ultra Wideband (UWB) technology (V1.3.1)
ETSI EN 302 500-1-2008 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 8,5 GHz; Part 1: Technical characteristics and test

ETSI - European Telecommunications Standards Institute, Detection with multispectral techniques

TR 102 763-2009 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics of Detect-And-Avoid (DAA) mitigation techniques for SRD equipment using Ultra Wideband (UWB) technology (V1.1.1)
TS 102 754-2008 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics of Detect-And-Avoid (DAA) mitigation techniques for SRD equipment using Ultra Wideband (UWB) technology (V1.2.1)
TS 102 754-2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics of Detect And Avoid (DAA) mitigation techniques for SRD equipment using Ultra Wideband (UWB) technology (V1.3.1)
TS 102 903-2011 Electromagnetic compatibility and Radio spectrum Matters (ERM); Compliance tests for cognitive interference mitigation for use by UHF RFID using Detect-And-Avoid (DAA) or other similar techniques (V1.1.1)

Institute of Electrical and Electronics Engineers (IEEE), Detection with multispectral techniques

IEEE 802.3-1993 Information technology; local and metropolitan area networks; part 3: carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications
IEEE 802.3/COR 2-2007 Information technology - Telecommunications and information exchange between systems - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications - Corrigendum 2: IEEE S
IEEE 802.3-2002 Information technology - Telecommunications and information exchange between systems; Local and metropolitan area networks; Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer s
IEEE Std 802.3ad-2000 IEEE Standard for Information Technology - Local and Metropolitan Area Networks - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications-Aggregation of Multiple Link Segments
IEEE 802.3-2005 Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks; Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer
IEEE 802.3-1998 Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer
IEEE 802.3-2000 Information technology - Telecommunications and information exchange between systems; Local and metropolitan area networks; Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer s

US-CFR-file, Detection with multispectral techniques

CFR 9-113.47-2014 Animals and animal products. Part113:Standard requirements. Section113.47:Detection of extraneous viruses by the fluorescent antibody technique.

CEN - European Committee for Standardization, Detection with multispectral techniques

PREN 17132-2018 Textiles and textile products - Critical substances potentially present in components of textile product materials - Determination of Polycyclic Aromatic Hydrocarbons (PAH)@ method using chromatographic techniques

PL-PKN, Detection with multispectral techniques

PN Z04131-10-1993 Air purity protection Tests for mercury and its compounds Determination of mercury vapour in ambient air (immission) by cold vapour techni?ue of atomie absorption spectrometry
PN Z04133-06-1990 Air purity protection Tests for mercury and its compounds Determination of mercury vapour in ambient air (immission) by cold vapour techni?ue of atomie absorption spectrometry

Association of German Mechanical Engineers, Detection with multispectral techniques

VDI 2267 Blatt 8-2000 Determination of suspended particles in ambient air - Measurement of the mass concentration of mercury - Sampling by sorption as amalgam and determination by atomic absorption spectrometry (AAS) with cold vapour technique

ESDU - Engineering Sciences Data Unit, Detection with multispectral techniques

ESDU 16001-2018 A Practical Guide to Turbulence and Flow Measurement by Thermal Anemometry (CTA)@ Laser-Doppler Anemometry (LDA) and Particle-Image Velocimetry (PIV) Part 1: Overview and Selection of Measurement Technique