ZH
RU
ES

Dual wavelength detection

Dual wavelength detection, Total:500 items.

In the international standard classification, Dual wavelength detection involves: Sugar. Sugar products. Starch, Farming and forestry, Optics and optical measurements, Fibre optic communications, Fluid storage devices, Fasteners, Cereals, pulses and derived products, Non-destructive testing, Testing of metals, Iron and steel products, Fuels, Integrated circuits. Microelectronics, Analytical chemistry, Telecommunication systems, Vocabularies, Lubricants, industrial oils and related products, Non-ferrous metals, Veterinary medicine, Welding, brazing and soldering, Metrology and measurement in general, Astronomy. Geodesy. Geography, Medical equipment, Construction equipment, Protection against crime, Equipment for petroleum and natural gas industries, Petroleum products in general, Special measuring equipment for use in telecommunications, Valves, Medical sciences and health care facilities in general, Petroleum, petroleum products and natural gas handling equipment, Equipment for entertainment, Optical equipment, Organic chemicals, Radiocommunications, Transport, Mining equipment, Air quality, Elements of buildings, Nuclear energy engineering, Radiation measurements, Railway engineering in general, Linear and angular measurements, Inorganic chemicals, Measurement of volume, mass, density, viscosity, Construction of waterways and ports, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Audio, video and audiovisual engineering, Acoustics and acoustic measurements, Woodworking equipment, Protective equipment.


Group Standards of the People's Republic of China, Dual wavelength detection

  • T/ZNZ 183-2023 Determination of amylose and amylopectin in tubers Dual wavelength spectrophotometry
  • T/GXAS 222-2021 Determination of amylose and amylopect in content in root and tuber crops -Dual-wavelength spectrophotometry
  • T/QAS 076-2022 Determination of Amylose and Amylopectin in Highland Barley by Dual-Wavelength Spectrophotometry
  • T/CVMA 115-2023 Method of duplex real-time PCR for detection of Chlamydia Felis and Bordetella Bronchiseptica
  • T/ZKJXX 00032-2023 Technical requirements and test methods for long-wave receivers
  • T/GDC 172-2022 Lifewave health parameter detector
  • T/CSTM 00666-2023 Non-destructive testing –Steel products –Ultrasonic testing method for steel ingot
  • T/JSQA 164-2023 Code for on-site inspection of engineering pile length
  • T/CITSA 13-2021 Traffic incident detection-technical specification for microwave traffic incident detector
  • T/CSTM 00697-2023 Non-destructive testing – Ultrasonic testing –Ultrasonic testing method for weld overlay of wellhead and tree products

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Dual wavelength detection

  • GB/T 28077-2011 Detection and identification of Sinoxylon anale Lesne
  • GB/T 32212-2015 Standard practice for testing fixed-wavelength photometric detectors used in liquid chromatography
  • GB/T 29230.1-2012 Opto-electronic-opto bidirectional wavelength converter for plastic optical fiber transmission system.Part 1: Wavelength converter between 650nm and 1550nm (or 1310nm or 850nm) of 100Mbit/s ethernet
  • GB/T 42972-2023 Microwave circuit detector test method
  • GB/T 31211-2014 Non-destructive testing.Ultrasonic guided wave testing.General principle
  • GB/T 23904-2009 Non-destructive testing.Test method for ultrasonic testing by surface wave
  • GB/T 23905-2009(英文版) Non destructive testing Blocks for ultrasonic testing
  • GB/T 28704-2012 Non-destructive testing.Test method for ultrasonic guided wave testing based on magnetostrictive effects
  • GB/T 15489.3-1995 Colour filter glass test methods Temperatrue Coefficient of sharp cut wavelength
  • GB/T 13255.5-1991 Caprolactam for industrial use--Determination of absorbance at a wavelength of 290nm
  • GB/T 26771-2011 The setting specification for microwave traffic detector
  • GB/T 28072-2011(英文版) Detection and identification of Alternaria gaisen Nagano
  • GB/T 23908-2009 Non-destructive testing.Practice for ultrasonic pulse-echo straight-beam testing by the contact method
  • GB/T 23912-2009 Non-destructive testing.Practice for immersed ultrasonic testing by the reflection method using pulsed longitudinal waves
  • GB/T 32073-2015 Non-destructive testing.Test method for measuring residual stress using ultrasonic critical refracted longitudinal wave

National Metrological Verification Regulations of the People's Republic of China, Dual wavelength detection

UNKNOWN, Dual wavelength detection

  • GB/T 32211-2015 Test Method for Variable Wavelength Photometric Detectors for Liquid Chromatography
  • GB/T 32211-2015 Test Method for Variable Wavelength Photometric Detectors for Liquid Chromatography

工业和信息化部, Dual wavelength detection

  • YD/T 3128-2016 Fiber Bragg grating based on wavelength detection for communication
  • YD/T 4113-2022 Wavelength Switched Optical Network (WSON) Test Method
  • JB/T 4008-2020 Recommended practice for immersed ultrasonic testing by the reflection method using pulsed longitudinal waves
  • JB/T 4009-2020 Non-destructive testing contact ultrasonic longitudinal wave pulse echo detection and evaluation method of discontinuity
  • YS/T 1103-2016 Ultrasonic (transverse wave) detection method for copper and copper alloy pipes
  • YD/T 3917-2021 Access network equipment testing method Wavelength routing method WDM-PON

Professional Standard - Forestry, Dual wavelength detection

  • LY/T 2355-2014 Quarantine technical rules of Heterobostrychus aequalis (Waterhouse)

Professional Standard - Commodity Inspection, Dual wavelength detection

  • SN/T 1821-2006 Identification of kapok borer heterobostrychus aequalis(Waterhouse)

海关总署, Dual wavelength detection

Danish Standards Foundation, Dual wavelength detection

  • DS/EN 61290-4-1:2011 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
  • DS 2333:1987 Non-destructive testing. Ultrasonic testing. Terminology
  • DS/EN 10308:2002 Non destructive testing - Ultrasonic testing of steel bars
  • DS/EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
  • DS/EN 14127:2011 Non-destructive testing - Ultrasonic thickness measurement
  • DS/EN 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters
  • DS/EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2
  • DS/EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1
  • DS/EN ISO 11666:2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
  • DS/EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
  • DS/EN 583-3:1998 Non destructive testing - Ultrasonic examination - Part 3: Transmission technique
  • DS/EN ISO 23243:2020 Non-destructive testing – Ultrasonic testing with arrays – Vocabulary (ISO 23243:2020)
  • DS/ISO 23243:2020 Non-destructive testing – Ultrasonic testing with arrays – Vocabulary
  • DS/EN IEC 61300-3-7:2021 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-7: Examinations and measurements – Wavelength dependence of attenuation and return loss of single mode components
  • DS/EN 61300-3-7:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components
  • DS/EN ISO 23279:2010 Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds
  • DS/EN 60793-1-44:2011 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength
  • DS/EN ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
  • DS/EN 583-1/A1:2004 Non-destructive testing - Ultrasonic examination - Part 1: General principles
  • DS/EN 583-1:1999 Non-destructive testing - Ultrasonic examination - Part 1: General principles

Association Francaise de Normalisation, Dual wavelength detection

  • NF C93-805-4-1*NF EN 61290-4-1:2017 Optical amplifiers - Test methods - Part 4-1 : gain transient parameters - Two-wavelength method
  • NF A09-017*NF EN ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary
  • NF EN ISO 5577:2017 Essais non destructifs - Contrôle par ultrasons - Vocabulaire
  • NF C93-846-2*NF EN 62129-2:2011 Calibration of wavelength/optical frequency measurement insturments - Part 2 : Michelson interferometer single wavelength meters.
  • NF A09-322:1985 Non destructive testing - Ultrasonic testing - Specifications of ultrasonic probes for industrial use
  • NF A09-332*NF EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles
  • NF A09-334*NF EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique
  • NF A09-023*NF EN ISO 23243:2020 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary
  • NF EN ISO 16823:2014 Essais non destructifs - Contrôle par ultrasons - Technique par transmission
  • NF EN ISO 16810:2014 Essais non destructifs - Contrôle par ultrasons - Principes généraux
  • NF EN ISO 16809:2019 Essais non destructifs - Mesurage de l'épaisseur par ultrasons
  • NF EN 50130-5:2011 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 2 : appareils de mesure de longueur d'onde unique à interféromètre de Michelson
  • NF EN 302998-1:2011 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 2 : appareils de mesure de longueur d'onde unique à interféromètre de Michelson
  • NF EN 62129-2:2011 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 2 : appareils de mesure de longueur d'onde unique à interféromètre de Michelson
  • NF DTU 40.37:2011 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 2 : appareils de mesure de longueur d'onde unique à interféromètre de Michelson
  • NF EN 15317:2013 Essais non destructifs - Contrôle ultrasonore - Caractérisation et vérification des appareils de mesure de l'épaisseur par ultrasons
  • NF A09-323:1987 Non-destructive testing - Ultrasonic testing - Methods for specifying ultrasonic probes for industrial use
  • NF C93-805-4-1:2011 Optical amplifiers - Test methods - Part 4-1 : gain transient parameters - Two-wavelength method.
  • NF EN ISO 2400:2012 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage no 1
  • NF A09-018*NF ISO 19675:2017 Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT)
  • A09-325:1987 Non-destructive testing. Ultrasonic testing. Acoustic beams. Generalities.
  • NF A09-321:1988 Non destructive testing. Ultrasonic testing. Methods for specifying ultrasonic apparatus.
  • NF C48-230:1987 Intrusion detection - Ultrasound motion detectors - Specific standard.
  • NF A89-521*NF EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
  • NF EN ISO 7963:2022 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage no 2
  • NF A89-520*NF EN ISO 17640:2018 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
  • NF A04-307:1981 IRON AND STEEL. ULTRASONIC INTERNAL DEFECT DETECTION IN LONG PRODUCTS EXCLUDING BEAMS,RAILS AND SIMILAR SECTION (MANUAL INSPECTION).
  • NF A09-333*NF EN ISO 16811:2014 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
  • NF EN ISO 16946:2017 Essais non destructifs - Essais par ultrasons - Spécifications relatives aux blocs d'étalonnage à gradins
  • NF A09-312*NF EN ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
  • NF EN ISO 11666:2018 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Niveaux d'acceptation
  • NF EN ISO 16811:2014 Essais non destructifs - Contrôle par ultrasons - Réglage de la sensibilité et de la base de temps
  • NF C93-903-7*NF EN IEC 61300-3-7:2021 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7 : examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components
  • NF C93-903-7*NF EN 61300-3-7:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7 : examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components
  • NF A09-336*NF EN ISO 16827:2014 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities
  • NF ISO 19675:2017 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage pour la technique multi-éléments
  • NF A09-324:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment.
  • NF EN ISO 16827:2014 Essais non destructifs - Contrôle par ultrasons - Caractérisation et dimensionnement des discontinuités
  • NF A09-324*NF EN 15317:2013 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
  • NF EN ISO 17405:2022 Essais non destructifs - Contrôle par ultrasons - Technique d'essai des placages produits par soudage, laminage et explosion
  • NF A09-320-1:2010 Non-destructive testing - Characterization and verification of ultrasonic testing equipment - Part 1 : instruments.
  • NF EN 60793-1-44:2012 Fibres optiques - Partie 1-44 : méthodes de mesure et procédures d'essai - Longueur d'onde de coupure
  • NF A89-523:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys.
  • NF A89-523*NF EN ISO 22825:2017 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
  • NF EN ISO 23243:2020 Essais non destructifs - Contrôle à l'aide de réseaux ultrasonores - Vocabulaire

German Institute for Standardization, Dual wavelength detection

  • DIN EN 61290-4-1:2017-06 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method (IEC 61290-4-1:2016); German version EN 61290-4-1:2016 / Note: DIN EN 61290-4-1 (2012-04) remains valid alongside this standard until 2019-10-31.
  • DIN EN ISO 5577:2017-05 Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017); German version EN ISO 5577:2017
  • DIN EN 10308:2002-03 Non-destructive testing - Ultrasonic testing of steel bars; German version EN 10308:2001
  • DIN 51440-1:2003 Testing of gasolines - Determination of phosphorus content - Part 1: Analysis by wavelength dispersive X-ray spectrometry (XRS)
  • DIN EN 15317:2014-02 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment; German version EN 15317:2013
  • DIN EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012); German version EN ISO 16810:2014
  • DIN EN ISO 16810:2014-07 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012); German version EN ISO 16810:2014
  • DIN EN ISO 16823:2014-07 Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012); German version EN ISO 16823:2014
  • DIN EN ISO 16809:2020-02 Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017); German version EN ISO 16809:2019
  • DIN EN 62129-2:2012-03 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters (IEC 62129-2:2011); German version EN 62129-2:2011
  • DIN 51391-2:1994 Testing of lubricants; determination of the content of additive elements; analysis by wavelengthdispersive X-ray spectrometry (XRS)
  • DIN EN ISO 11666:2018-05 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018); German version EN ISO 11666:2018
  • DIN EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012); German version EN ISO 16823:2014
  • DIN EN ISO 2400:2013-01 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012); German version EN ISO 2400:2012
  • DIN EN ISO 7963:2023-02 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022); German version EN ISO 7963:2022
  • DIN EN 583-1:1998 Non-destructive testing - Ultrasonic examination - Part 1: General principles; German version EN 583-1:1998
  • DIN EN ISO 23243:2021-03 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020); German version EN ISO 23243:2020
  • DIN EN ISO 16811:2014-06 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting (ISO 16811:2012); German version EN ISO 16811:2014
  • DIN EN ISO 17640:2019 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018)
  • DIN EN ISO 16826:2014-06 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012); German version EN ISO 16826:2014
  • DIN 51431-2:2004 Testing of lubricants - Determination of the magnesium content - Part 2: Analysis by wavelength dispersive X-ray spectrometry (XRF)
  • DIN EN ISO 16946:2017-07 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017); German version EN ISO 16946:2017
  • DIN EN ISO 22825:2018-02 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017); German version EN ISO 22825:2017
  • DIN 51379-2:1990 Testing of lubricants; determination of molybdenum content of lubricating oils; analysis by wavelength dispersive X-ray spectrometry (XRS)
  • DIN EN 62129-2:2012 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters (IEC 62129-2:2011); German version EN 62129-2:2011
  • DIN 25702:1995 Shieldings for detectors for nuclide-specific activity measurements - Standard-systems with germanium detectors
  • DIN EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018)
  • DIN EN ISO 7963:2023 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
  • DIN EN ISO 16827:2014-06 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2012); German version EN ISO 16827:2014
  • DIN EN IEC 61300-3-7:2022-11 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components (IEC 61300-3-7:2021); German v...
  • DIN EN 15317:2014 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment; German version EN 15317:2013
  • DIN EN 13068-2:2000-02 Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices; German version EN 13068-2:1999
  • DIN 25450:1990 Ultrasonic equipment for manual testing
  • DIN EN ISO 13588:2019-07 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019); German version EN ISO 13588:2019
  • DIN EN 583-3:1997 Non-destructive testing - Ultrasonic testing - Part 3: Transmission technique; German version EN 583-3:1997

Tianjin Provincial Standard of the People's Republic of China, Dual wavelength detection

  • DB12/T 861-2018 Ultrasonic testing method for circumferential cracks in high-pressure stud bolts
  • DB12/T 861-2019 Ultrasonic testing method for circumferential cracks in high-pressure stud bolts

Anhui Provincial Standard of the People's Republic of China, Dual wavelength detection

  • DB34/T 1711-2012 Ultrasonic testing method for circumferential cracks in high-pressure stud bolts
  • DB34/T 1711-2023 Ultrasonic detection method for circumferential cracks in threads of high-pressure stud bolts in service
  • DB34/T 728-2018 Inspection regulations for long-distance natural gas pipelines (direct inspection)

HU-MSZT, Dual wavelength detection

International Electrotechnical Commission (IEC), Dual wavelength detection

  • IEC 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
  • IEC 61290-4-1:2011 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
  • IEC 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters
  • IEC 61300-3-7:2000 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements; Wavelength dependence of attenuation and return loss
  • IEC 61300-3-7:2004 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss
  • IEC 60793-1-44:2023 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength

ES-UNE, Dual wavelength detection

  • UNE-EN 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method (Endorsed by Asociación Española de Normalización in February of 2017.)
  • UNE-EN 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters (Endorsed by AENOR in October of 2011.)
  • UNE-EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018)
  • UNE-EN ISO 16809:2020 Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017)
  • UNE-EN ISO 23243:2022 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020)
  • UNE-EN ISO 17640:2019 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018)
  • UNE-EN ISO 19285:2018 Non-destructive testing of welds - Phased array ultrasonic testing (PAUT) - Acceptance levels (ISO 19285:2017)
  • UNE-EN ISO 23279:2018 Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds (ISO 23279:2017)
  • UNE-EN ISO 7963:2023 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
  • UNE-EN 60793-1-44:2011 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength (Endorsed by AENOR in October of 2011.)
  • EN IEC 60793-1-44:2023 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength
  • UNE-EN ISO 13588:2020 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019)

British Standards Institution (BSI), Dual wavelength detection

  • BS EN 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments. Michelson interferometer single wavelength meters
  • BS 9690-2:2011 Non-destructive testing. Guided wave testing. Basic requirements for guided wave testing of pipes, pipelines and structural tubulars
  • BS EN 15317:2013 Non-destructive testing. Ultrasonic testing. Characterization and verification of ultrasonic thickness measuring equipment
  • BS ISO 18211:2016 Non-destructive testing. Long-range inspection of above-ground pipelines and plant piping using guided wave testing with axial propagation
  • BS EN ISO 16810:2014 Non-destructive testing. Ultrasonic testing. General principles
  • BS EN ISO 16823:2014 Non-destructive testing. Ultrasonic testing. Transmission technique
  • BS EN IEC 60793-1-44:2023 Optical fibres - Measurement methods and test procedures. Cut-off wavelength
  • BS 9690-1:2011 Non-destructive testing. Guided wave testing. General guidance and principles
  • BS EN 14127:2011 Non-destructive testing. Ultrasonic thickness measurement
  • BS EN ISO 2400:2012 Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 1
  • BS EN ISO 16826:2014 Non-destructive testing. Ultrasonic testing. Examination for discontinuities perpendicular to the surface
  • BS EN 60793-1-44:2002 Optical fibres - Measurement methods and test procedures - Cut-off wavelength
  • BS EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments. Optical spectrum analyzers
  • BS EN ISO 16811:2014 Non-destructive testing. Ultrasonic testing. Sensitivity and range setting
  • BS EN 61300-3-7:2012 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Wavelength dependence of attenuation and return loss of single mode components
  • BS EN ISO 11666:2011 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
  • BS EN ISO 11666:2010 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
  • 22/30439260 DC BS ISO 4773. Non-destructive testing. Method. Ultrasonic guided wave inspection using phased array technique
  • BS EN IEC 61300-3-7:2021 Tracked Changes. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Wavelength dependence of attenuation and return loss of single mode components
  • BS EN 14127:2004 Non-destructive testing - Ultrasonic thickness measurement
  • BS 5343-2:1991 Gas detector tubes - Specification for long term gas detector tubes
  • BS EN ISO 16827:2014 Non-destructive testing. Ultrasonic testing. Characterization and sizing of discontinuities
  • BS EN 60793-1-44:2011 Optical fibres. Measurement methods and test procedures. Cut-off wavelength
  • BS EN ISO 11666:2018 Tracked Changes. Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
  • 22/30437356 DC BS EN ISO 7963. Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 2
  • BS EN ISO 17640:2017 Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment
  • BS EN ISO 17640:2010 Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment
  • BS ISO 7059:2023 Caprolactam for industrial use. Determination of absorbance at a wavelength of 290 nm

Professional Standard - Machinery, Dual wavelength detection

  • JB/T 9358-1999 Test method for fixed wavelength (254nm) UV detector used in liquid chromatography
  • JB/T 10814-2007 Non-destructive testing.Ultrasonic testing by surface wave
  • JB/T 11604-2013 Non-destructive testing instruments.Ultrasonic thickness gauge
  • JB/T 6903-2008 Methods for ultrasonic examination of steel forgings for valves

SAE - SAE International, Dual wavelength detection

Society of Automotive Engineers (SAE), Dual wavelength detection

Professional Standard - Military and Civilian Products, Dual wavelength detection

  • WJ 2278-1995 Regulations for verification of interference filters for wavelength verification of spectrophotometers
  • WJ 2279-1995 Verification rules for wavelength standard device of low-pressure quartz mercury lamp
  • WJ 2387-1997 Verification Regulations for Microwave and Millimeter Wave Phase Noise Test System
  • WJ 2589-2002 Ultrasonic Testing of Large Caliber Projectiles

American Society for Testing and Materials (ASTM), Dual wavelength detection

  • ASTM E685-93 Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography
  • ASTM E685-93(2013) Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography
  • ASTM E685-93(2021) Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography
  • ASTM E1657-98 Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography
  • ASTM E1657-98(2001) Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography
  • ASTM E1657-98(2019) Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography
  • ASTM E388-04(2009) Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers ,
  • ASTM E1685-20 Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique
  • ASTM G178-16 Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique

International Organization for Standardization (ISO), Dual wavelength detection

  • ISO 16831:2012 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
  • ISO 16810:2012 Non-destructive testing - Ultrasonic testing - General principles
  • ISO/CD 5577:2023 Non-destructive testing — Ultrasonic testing — Vocabulary
  • ISO/FDIS 4773 Non-destructive testing — Ultrasonic guided wave testing using the phased array technique
  • ISO/DIS 4773 Non-destructive testing — Ultrasonic guided wave testing using the phased array technique
  • ISO 4773:2011 Non-destructive testing — Ultrasonic guided-wave testing using the phased-array technique
  • ISO/CD 16831:2023 Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment
  • ISO 18211:2016 Non-destructive testing - Long-range inspection of above-ground pipelines and plant piping using guided wave testing with axial propagation
  • ISO 23243:2020 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary
  • ISO/CD 16810:2023 Non-destructive testing — Ultrasonic testing — General principles
  • ISO/CD 16823:2011 Non-destructive testing — Ultrasonic testing — Through-transmission technique
  • ISO 4773:2023 Non-destructive testing — Ultrasonic guided-wave testing using the phased-array technique
  • ISO 16809:2012 Non-destructive testing - Ultrasonic thickness measurement
  • ISO 16809:2017 Non-destructive testing - Ultrasonic thickness measurement
  • ISO/CD TR 23867 Ultrasonic testing of hardmetals
  • ISO 16811:2012 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
  • ISO 7963:2022 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 2
  • ISO/CD 16811:2011 Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
  • ISO/CD 16826:2011 Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface
  • ISO/CD 16946 Non-destructive testing — Ultrasonic testing — Specification for step wedge calibration block
  • ISO 24647:2023 Non-destructive testing — Robotic ultrasonic test systems — General requirements
  • ISO/DIS 16946:2023 Non-destructive testing — Ultrasonic testing — Specification for a step wedge calibration block
  • ISO 7963:2006 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2
  • ISO/CD 16827:2023 Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
  • ISO 17405:2022 Non-destructive testing — Ultrasonic testing — Technique of testing claddings produced by welding, rolling and explosion
  • ISO/DIS 7059 Caprolactam for industrial use — Determination of absorbance at a wavelength of 290 nm
  • ISO 23279:2017 Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds
  • ISO 7059:1982 Caprolactam for industrial use; Determination of absorbance at a wavelength of 290 nm
  • ISO 7059:2023 Caprolactam for industrial use — Determination of absorbance at a wavelength of 290 nm
  • ISO/PRF 7059:2023 Caprolactam for industrial use — Determination of absorbance at a wavelength of 290 nm

Korean Agency for Technology and Standards (KATS), Dual wavelength detection

  • KS B ISO 12710:2021 Non-destructive testing — Ultrasonic inspection — Evaluating electronic characteristics of ultrasonic test instruments
  • KS B ISO 16810:2019 Non-destructive testing ― Ultrasonic testing ― General principles
  • KS B ISO 5577:2022 Non-destructive testing — Ultrasonic testing — Vocabulary
  • KS B ISO 16823:2022 Non-destructive testing — Ultrasonic testing —Transmission technique
  • KS D 0075-2014(2019) Ultrasonic inspection of titanium pipes and tubes
  • KS B ISO 11666:2019 Non-destructive testing of welds ― Ultrasonic testing ― Acceptance levels
  • KS B ISO 17640:2019 Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
  • KS D 0075-1994 Ultrasonic inspection of titanium pipes and tubes
  • KS D 0075-2014 Ultrasonic inspection of titanium pipes and tubes
  • KS B ISO 2400:2019 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
  • KS B 0831-2001(2021) Standard test blocks for ultrasonic testing
  • KS C IEC 61300-3-7:2008 Fibre optic interconnecting devices and passive components－Basic test and measurement procedures－Part 3-7：Examinations and measurements－Wavelength dependence of attenuation and return loss
  • KS B ISO 16826:2022 Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface
  • KS D 0252-1994 Ultrasonic examination for arc welded steel pipes
  • KS D 0252-2019 Ultrasonic testing for the detection of longitudinal and/or transverse imperfections in welded seam of arc welded steel pipes
  • KS C IEC 61300-3-7-2008(2018) Fibre optic interconnecting devices and passive components－Basic test and measurement procedures－Part 3-7：Examinations and measurements－Wavelength dependence of attenuation and return loss
  • KS B ISO 10375:2018 Non-destructive testing — Ultrasonic inspection — Characterization of search unit and sound field
  • KS B ISO 16827:2022 Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
  • KS B ISO 25902-2:2021 Titanium pipes and tubes — Non-destructive testing — Part 2: Ultrasonic testing for the detection of longitudinal imperfections
  • KS C 3700-2007(2017) Partial discharge detectors with electromagnetic wave method
  • KS B 0522-1994 Method of ultrasonic testing and classification of test results for T type welds in aluminium plates
  • KS B ISO 23279-A:2019 Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds
  • KS B 4411-2014(2020) Double sizers — Test and inspection methods
  • KS E 4113-1996 Detector tube type carbon monoxide measuring instrunments(Length &##8211; of - stain)

KR-KS, Dual wavelength detection

  • KS B ISO 12710-2021 Non-destructive testing — Ultrasonic inspection — Evaluating electronic characteristics of ultrasonic test instruments
  • KS B ISO 16810-2019 Non-destructive testing ― Ultrasonic testing ― General principles
  • KS B ISO 5577-2022 Non-destructive testing — Ultrasonic testing — Vocabulary
  • KS B ISO 16823-2022 Non-destructive testing — Ultrasonic testing —Transmission technique
  • KS B ISO 11666-2019 Non-destructive testing of welds ― Ultrasonic testing ― Acceptance levels
  • KS B ISO 17640-2019 Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
  • KS B ISO 2400-2019 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
  • KS B ISO 16826-2022 Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface
  • KS B ISO 10375-2018 Non-destructive testing — Ultrasonic inspection — Characterization of search unit and sound field
  • KS B ISO 16827-2022 Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
  • KS B ISO 25902-2-2021 Titanium pipes and tubes — Non-destructive testing — Part 2: Ultrasonic testing for the detection of longitudinal imperfections
  • KS B ISO 22825-2023 Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys
  • KS B ISO 23279-A-2019 Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds

国家质量监督检验检疫总局, Dual wavelength detection

  • SN/T 5008-2017 Quarantine and Identification Methods for Diplocarpa genus (non-Chinese species)

FI-SFS, Dual wavelength detection

Lithuanian Standards Office , Dual wavelength detection

  • LST EN 10308-2002 Non destructive testing - Ultrasonic testing of steel bars
  • LST EN 15317-2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
  • LST EN 61290-4-1-2011 Optical amplifiers - Test methods -- Part 4-1: Gain transient parameters - Two-wavelength method (IEC 61290-4-1:2011)
  • LST EN 14127-2011 Non-destructive testing - Ultrasonic thickness measurement
  • LST EN 62129-2-2011 Calibration of wavelength/optical frequency measurement instruments -- Part 2: Michelson interferometer single wavelength meters (IEC 62129-2:2011)
  • LST EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012)
  • LST EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010)
  • LST EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
  • LST EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
  • LST EN ISO 23243:2021 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020)
  • LST EN ISO 11666:2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2010)
  • LST EN 583-3-2000 Non-destructive testing - Ultrasonic examination - Part 3: Transmission technique
  • LST EN 583-1-2000 Non-destructive testing - Ultrasonic examination - Part 1: General principles
  • LST EN 583-1-2000/A1-2004 Non-destructive testing - Ultrasonic examination - Part 1: General principles
  • LST EN 13068-2-2001 Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices

AENOR, Dual wavelength detection

  • UNE-EN 10308:2002 Non destructive testing - Ultrasonic testing of steel bars
  • UNE-EN 15317:2014 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
  • UNE-EN 14127:2011 Non-destructive testing - Ultrasonic thickness measurement
  • UNE-EN ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017)
  • UNE-EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012)
  • UNE-EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012)
  • UNE-EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010)
  • UNE-EN 61300-3-7:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components
  • UNE-EN ISO 7963:2011 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
  • UNE-EN ISO 2400:2013 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
  • UNE-EN ISO 11666:2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2010)
  • UNE-EN ISO 16811:2014 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting (ISO 16811:2012)
  • UNE-EN ISO 16826:2014 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012)

European Committee for Standardization (CEN), Dual wavelength detection

  • prEN ISO 5577 Non-destructive testing — Ultrasonic testing — Vocabulary
  • EN 10308:2001 Non destructive testing - Ultrasonic testing of steel bars
  • prEN ISO 16831 rev Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment
  • EN ISO 23243:2020 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020)
  • prEN ISO 16810 rev Non-destructive testing — Ultrasonic testing — General principles
  • prEN ISO 16823 rev Non-destructive testing — Ultrasonic testing — Transmission technique
  • EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles
  • EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique
  • prEN ISO 16811 rev Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
  • prEN ISO 16826 rev Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface
  • prEN ISO 16946 rev Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
  • EN 14127:2011 Non-destructive testing - Ultrasonic thickness measurement
  • EN ISO 7963:2022 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
  • EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
  • prEN ISO 16827 rev Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
  • EN ISO 16811:2014 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
  • EN ISO 16827:2014 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities
  • EN 583-3:1997 Non-Destructive Testing - Ultrasonic Examination - Part 3: Transmission Technique

PL-PKN, Dual wavelength detection

  • PN T06561-1971 Microwave measuring instruments Cavity wavemeter General requirements and tests
  • PN-EN ISO 17640-2019-01 P Non-destructive testing of welds -- Ultrasonic testing -- Techniques, testing levels, and assessment (ISO 17640:2018)

Jiangsu Provincial Standard of the People's Republic of China, Dual wavelength detection

  • DB32/T 2265-2012 Determination of Amylose and Amylopectin in Fresh Corn by Dual Wavelength Spectrophotometry

BE-NBN, Dual wavelength detection

Professional Standard - Agriculture, Dual wavelength detection

  • JJG(教委) 016-1996 Verification rules for wavelength dispersive X-ray fluorescence spectrometer
  • JAP-096 The method of detection of elixir
  • JAP-132 Amitraz detection method
  • JAP-130 Detection method of bispyribac
  • JAP-131 Detection method of biguanide
  • JAP-129 Detection method of difenfluramide

RO-ASRO, Dual wavelength detection

  • STAS R 12500/3-1987 Ultrasonic fault detection CHECKING LP METHODS IX SERVICE OF ULTRASONICFAULT DETECTORS
  • STAS R 12500/2-1987 ULTRASONIC FAULT DETECTION CALIBRATION AND ADJUSTMENT OF ULTRASONIC FA DL DETECTORS
  • STAS 9552-1987 Ultrasonic fault detection MANUAL EXAMINATION OF FUSE WELDING JOINTS

AR-IRAM, Dual wavelength detection

NO-SN, Dual wavelength detection

  • NS 10210-1982 Non-destructive testing - Ultrasonic testing - Calibration block 1

IT-UNI, Dual wavelength detection

Indonesia Standards, Dual wavelength detection

SE-SIS, Dual wavelength detection

Standard Association of Australia （SAA）, Dual wavelength detection

  • AS ISO 16809:2020 Non-destructive testing — Ultrasonic thickness measurement
  • AS 2452.3:2005 Non-destructive testing - Determination of thickness - Use of ultrasonic testing
  • AS 2574:2000
  • AS 2563:1996 Wavelength dispersive X-ray fluorescence spectrometers - Determination of precision

CENELEC - European Committee for Electrotechnical Standardization, Dual wavelength detection

  • EN 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters
  • EN 60793-1-44:2002 Optical Fibres Part 1-44: Measurement Methods and Test Procedures - Cut-Off Wavelength

IETF - Internet Engineering Task Force, Dual wavelength detection

  • RFC 5880-2010 Bidirectional Forwarding Detection (BFD)
  • RFC 7880-2016 Seamless Bidirectional Forwarding Detection (S-BFD)
  • RFC 7331-2014 Bidirectional Forwarding Detection (BFD) Management Information Base
  • RFC 5882-2010 Generic Application of Bidirectional Forwarding Detection (BFD)
  • RFC 8562-2019 Bidirectional Forwarding Detection (BFD) for Multipoint Networks
  • RFC 5883-2010 Bidirectional Forwarding Detection (BFD) for Multihop Paths

US-FCR, Dual wavelength detection

Taiwan Provincial Standard of the People's Republic of China, Dual wavelength detection

  • CNS 14138-1998 Method of ultrasonic test for titanium pipes and tubes
  • CNS 13342-1994 Glossary of Terms Related to Nondestructive Testing (Ultrasonic Testing Terms)
  • CNS 14136-1998 Method of ultrasonic test for steel forgings
  • CNS 11224-1991 Evaluation Characteristics of Pulse Echo Ultrasonic Testing System
  • CNS 5253-1980 Carbon Monoxide Detector with Length-of-Stain Type Detector Tubes
  • CNS 11401-1995 Method of Ultrasonic Test for Steel Butt Welds
  • CNS 13404-1994 Method of Ultrasonic Test for Arc Welded Steel Pipes
  • CNS 12618-2000 Method of Ultrasonic Test for the welds of Steel Structure
  • CNS 12622-1989 Method of Ultrasonic Test for Large Firged Steel Shaft
  • CNS 4120-1998 Type G standard test block for ultrasonic normal beam testing
  • CNS 4122-1998 Type A1 standard test block for ultrasonic testing
  • CNS 13806-1997 Method of Measurement for Emission Wavelength and Luminous Intensity of Epitaxial Wafers of Light Emitting Diodes

Military Standard of the People's Republic of China-General Armament Department, Dual wavelength detection

  • GJB 593.1-1988 Non-destructive testing quality control specifications Ultrasonic longitudinal and transverse wave inspection
  • GJB 9654-2019 Ultrasonic testing method of TaW12 alloy sheet

Japanese Industrial Standards Committee (JISC), Dual wavelength detection

  • JIS C 6122-4-1:2013 Optical amplifiers.Test methods.Part 4-1: Transient parameters.Measurement of gain parameters using two-wavelength method
  • JIS T 1205:2005 Ultrasound ophthalmic measuring system for the axial length
  • JIS G 0584:2022 Ultrasonic examination for arc welded steel pipes
  • JIS K 0804:1992 Gas detector tubes (Length-of-stain type)
  • JIS Z 2354:1992 Method for measurement of ultrasonic attenuation coefficient of solid by pulse echo technique

European Committee for Electrotechnical Standardization（CENELEC）, Dual wavelength detection

  • EN 61290-4-1:2011 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
  • EN 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
  • EN 60793-1-44:2011 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength

YU-JUS, Dual wavelength detection

  • JUS F.S2.054-1977 Testing oftextiks. Determination ofshrink of filament yarns (Du Pont-test)
  • JUS C.K6.037-1982 Testing of prestressing steels. Determination of the transmission length

未注明发布机构, Dual wavelength detection

  • BS EN 1714:1998(2004) Non - destructive testing of welds — Ultrasonic testing of welded joints
  • BS EN 583-1:1999(2008) Non - destructive testing — Ultrasonic examination — Part 1 : General principles
  • BS EN 1712:1997(2004) Non - destructive testing of welds — Ultrasonic testing of welded joints — Acceptance levels
  • DIN EN 1714:2002 Non-destructive testing of welded joints – ultrasonic testing of welded joints
  • DIN EN 12668-1-A1:2004 Non-destructive testing – Characterization and verification of ultrasonic testing equipment – Part 1: Testing equipment
  • JIS G 0801:2023 Ultrasonic testing of steel plates for pressure vessels

RU-GOST R, Dual wavelength detection

  • GOST R 8.780-2012 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring of the energy, of the distribution of energy density, of the pulse duration and of the laser wavelength in the wavelength range from 0,3 to 2,0 µm
  • GOST 8.197-2005 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring of the spectral radiance in spectral range from 0,04 to 0,25 ?
  • GOST 8.197-1986 State system for ensuring the uniforming of measurements. State special standard and state verification schedule for means measuring spectral density of energy radiance of optical radiation in the wavelength range of 0,04-0,25 um
  • GOST 22727-1988 Rolled sheet. Ultrasonic test methods
  • GOST R ISO 16809-2015 Non-destructive testing. Ultrasonic testing. Thickness measurement
  • GOST R ISO 16831-2016 Non-destructive testing. Ultrasonic testing. Characterization and verification of ultrasonic thickness measuring equipment

Professional Standard - Construction Industry, Dual wavelength detection

Professional Standard - Public Safety Standards, Dual wavelength detection

  • GA/T 1995-2022 Forensic Science Metal Examination Wavelength Dispersive X-ray Fluorescence Spectrometry
  • GA/T 1654-2019 Forensic Science Paper Elemental Composition Examination Wavelength Dispersive X-ray Fluorescence Spectroscopy

CEN - European Committee for Standardization, Dual wavelength detection

国家能源局, Dual wavelength detection

  • SY/T 7373-2017 General technical specifications for digital geophones for onshore seismic exploration (bilingual version)

American National Standards Institute （ANSI), Dual wavelength detection

  • ANSI/ASTM D2622:2005 Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ANSI/TIA/EIA 455-80B-1998 Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power
  • ANSI S4.6-1982 Method of measuring recorded flux of magnetic sound records at medium wavelengths

国家市场监督管理总局、中国国家标准化管理委员会, Dual wavelength detection

  • GB/T 38952-2020 Non-destructive testing—Testing method for measuring residual stress using bulk wave
  • GB/T 34370.11-2020 Nondestructive testing of amusement equipments—Part 11: Ultrasonic guided wave testing
  • GB/T 39283-2020 Non-destructive testing—Testing method for surface-wave testing using electromagnetic acoustic transducer (EMAT) techniques

Professional Standard - Petroleum, Dual wavelength detection

Professional Standard - Post and Telecommunication, Dual wavelength detection

  • YD/T 592-1992 Test method for wavelength dispersion of mono-mode optical fiber - interference method
  • YD/T 504-1991 Technical conditions for short-wave long optical time domain reflectoscopes
  • YD/T 1527-2006 Technical requirements and test methods for optoelectronic(wavelength/mode)converter
  • YD/T 1527-2013 Photoelectric (wavelength/mode) converter technical requirements and test methods

IPC - Association Connecting Electronics Industries, Dual wavelength detection

U.S. Military Regulations and Norms, Dual wavelength detection

IN-BIS, Dual wavelength detection

GB-REG, Dual wavelength detection

CZ-CSN, Dual wavelength detection

  • CSN 05 1171-1983 Nondestructive testing. Methods of ultrasonic testing of welds
  • CSN 36 7109-1984 Fixed broadcasting transmitters in the LW and MW bands, automated Principal parameters, generál technical requirements, methods of measurement

National Association of Pipe Fabricators (NAPF), Dual wavelength detection

Professional Standard - Geology, Dual wavelength detection

国家煤矿安全监察局, Dual wavelength detection

National Metrological Technical Specifications of the People's Republic of China, Dual wavelength detection

AT-ON, Dual wavelength detection

CH-SNV, Dual wavelength detection

  • SN EN ISO 23243:2021 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020)

国家铁路局, Dual wavelength detection

  • TB/T 3568.3-2021 Railway nondestructive testing materials Part 3: Ultrasonic testing probes

VN-TCVN, Dual wavelength detection

  • TCVN 5115-2009 Non-destructive testing.Ultrasonic testing.Specification for calibration block No.2

TH-TISI, Dual wavelength detection

  • TIS 2026-2000 Caprolactam for industrial use.determination of absorbance at a wavelength of 290 nm

Professional Standard - Traffic, Dual wavelength detection

  • JT/T 576-2015 Water transport engineering.Nonmetal ultrasonic detector
  • JT/T 576-2004 Water transport engineering.Nonmetal ultrasonic detector

BR-ABNT, Dual wavelength detection

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Dual wavelength detection

AWS - American Welding Society, Dual wavelength detection

  • UEAW-1986 Handbook on the Ultrasonic Examination of Austenitic Welds

未注明发布机构, Dual wavelength detection

  • BS EN 1714:1998(2004) Non - destructive testing of welds — Ultrasonic testing of welded joints
  • BS EN 583-1:1999(2008) Non - destructive testing — Ultrasonic examination — Part 1 : General principles
  • BS EN 1712:1997(2004) Non - destructive testing of welds — Ultrasonic testing of welded joints — Acceptance levels
  • DIN EN 1714:2002 Non-destructive testing of welded joints – ultrasonic testing of welded joints
  • DIN EN 12668-1-A1:2004 Non-destructive testing – Characterization and verification of ultrasonic testing equipment – Part 1: Testing equipment
  • JIS G 0801:2023 Ultrasonic testing of steel plates for pressure vessels

Institute of Electrical and Electronics Engineers (IEEE), Dual wavelength detection

  dual wavelength scan, UV Dual Wavelength, dual wavelength, Dual-wavelength spectral detection, UV Dual Wavelength, dual wavelength detection, dual wavelength method, Dual wavelength analysis sub-wavelength, sodium dual wavelength, Dual wavelength UV detection, dual wavelength dominant wavelength, dual wavelength single wavelength, Dual Wavelength UV, Dual wavelength detection, Dual wavelength fluorescence detection, dual wavelength single wavelength, single wavelength dual wavelength, two-photon wavelength, Single wavelength, dual wavelength, multi-wavelength, dual wavelength uv.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved